smartctl version 5.36 [i686-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: SAMSUNG SV1204H Serial Number: 0504J1AW300586 Firmware Version: RK100-15 User Capacity: 120,060,444,672 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 1 Local Time is: Wed Jul 26 12:36:21 2006 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (3840) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 64) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 492 4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5608 5 Reallocated_Sector_Ct 0x0033 253 253 009 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0024 253 253 000 Old_age Offline - 0 9 Power_On_Half_Minutes 0x0032 099 099 000 Old_age Always - 6707h+25m 12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3198 194 Temperature_Celsius_x10 0x0022 144 115 000 Old_age Always - 36.4 197 Current_Pending_Sector 0x0033 253 253 009 Pre-fail Always - 0 198 Offline_Uncorrectable 0x0031 253 253 009 Pre-fail Offline - 0 199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0 201 Soft_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0 SMART Error Log Version: 1 ATA Error Count: 3350 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3350 occurred at disk power-on lifetime: 6703 hours (279 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 05 01 00 00 a0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- a1 00 05 01 00 00 a0 00 00:00:09.000 IDENTIFY PACKET DEVICE e0 00 00 00 00 00 a0 00 01:43:42.000 STANDBY IMMEDIATE c8 00 08 24 20 90 e4 00 01:43:41.000 READ DMA e7 00 00 00 00 00 a0 00 01:43:41.000 FLUSH CACHE e7 00 00 00 00 00 a0 00 01:43:41.000 FLUSH CACHE Error 3349 occurred at disk power-on lifetime: 6702 hours (279 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 05 01 00 00 a0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- a1 00 05 01 00 00 a0 00 00:00:09.000 IDENTIFY PACKET DEVICE c8 00 02 44 20 2f e4 00 49d+09:52:21.296 READ DMA c8 00 08 14 40 27 e4 00 49d+09:52:21.296 READ DMA c8 00 08 0c 40 27 e4 00 49d+09:52:21.296 READ DMA c8 00 08 04 40 27 e4 00 49d+09:52:21.296 READ DMA Error 3348 occurred at disk power-on lifetime: 6694 hours (278 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 05 01 00 00 a0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- a1 00 05 01 00 00 a0 00 03:13:51.000 IDENTIFY PACKET DEVICE 00 00 01 01 00 00 00 00 03:13:39.000 NOP [Abort queued commands] c8 00 02 44 20 2f e4 00 03:12:45.000 READ DMA c8 00 08 14 40 27 e4 00 03:12:45.000 READ DMA c8 00 08 0c 40 27 e4 00 03:12:45.000 READ DMA Error 3347 occurred at disk power-on lifetime: 6691 hours (278 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 05 01 00 00 a0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- a1 00 05 01 00 00 a0 00 00:00:07.000 IDENTIFY PACKET DEVICE e0 00 00 00 00 00 a0 00 49d+09:49:42.296 STANDBY IMMEDIATE c8 00 08 34 22 18 e4 00 49d+09:49:42.296 READ DMA c8 00 08 3c 22 18 e4 00 49d+09:49:42.296 READ DMA c8 00 08 44 22 18 e4 00 49d+09:49:42.296 READ DMA Error 3346 occurred at disk power-on lifetime: 6684 hours (278 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 05 01 00 00 a0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- a1 00 05 01 00 00 a0 00 02:49:42.000 IDENTIFY PACKET DEVICE 00 00 01 01 00 00 00 00 02:49:30.000 NOP [Abort queued commands] e7 00 00 00 00 00 e0 00 02:49:30.000 FLUSH CACHE e7 00 00 00 00 00 e0 00 02:49:24.000 FLUSH CACHE c8 00 08 78 a2 00 ec 00 00:20:47.000 READ DMA SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging