Bootbase Version: V1.13 | 02/16/2006 14:05:00
RAM: Size = 32768 Kbytes
DRAM POST: Testing: 32768K
OK
FLASH: AMD 32M *1

ZyNOS Version: V3.40(AJQ.3) | 09/26/2007  18:00:00

Press any key to enter debug mode within 3 seconds.
......
Enter Debug Mode
ATEN1,887852B1
OK
ATUP9402C000,400000
Starting XMODEM upload (CRC mode)....
CC
Total 99584 bytes received

OK
ATGO9402C000

U-Boot 1.3.3-rc2-00042-g11c0fa8-dirty (May  2 2008 - 18:53:07)

SOC:   TI AR7 (TNETD7200) id:0x002b, rev:0x11
DRAM:  32 MB
Flash:  4 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   cpmac
Hit any key to stop autoboot:  0
O2SURF # help
?       - alias for 'help'
base    - print or set address offset
bootm   - boot application image from memory
bootp   - boot image via network using BootP/TFTP protocol
cp      - memory copy
erase   - erase FLASH memory
flinfo  - print FLASH memory information
go      - start application at address 'addr'
help    - print online help
md      - memory display
mw      - memory write (fill)
printenv- print environment variables
protect - enable or disable FLASH write protection
rarpboot- boot image via network using RARP/TFTP protocol
reset   - Perform RESET of the CPU
setenv  - set environment variables
tftpboot- boot image via network using TFTP protocol
version - print monitor version
U-Boot#