Linux version 2.6.16.13-4-default (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 Wed May 3 04:53:23 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d4000 - 00000000000da000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data) BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 255MB LOWMEM available. found SMP MP-table at 000fb810 On node 0 totalpages: 65520 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 61424 pages, LIFO batch:15 HighMem zone: 0 pages, LIFO batch:0 DMI 2.3 present. IO/L-APIC allowed because system is MP or new enough ACPI: RSDP (v000 AMI ) @ 0x000f9fd0 ACPI: RSDT (v001 AMIINT VIA_P6 0x00000010 MSFT 0x00000097) @ 0x0fff0000 ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @ 0x0fff0030 ACPI: MADT (v001 AMIINT VIA_P6 0x00000009 MSFT 0x00000097) @ 0x0fff00c0 ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:3 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000) Built 1 zonelists Kernel command line: root=/dev/hda2 vga=0x317 resume=/dev/hda1 splash=silent bootsplash: silent mode. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 2394.102 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 253992k/262080k available (1491k kernel code, 7424k reserved, 607k data, 156k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4792.72 BogoMIPS (lpj=9585448) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000041d 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 03 Checking 'hlt' instruction... OK. checking if image is initramfs... it is Freeing initrd memory: 2315k freed not found! ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1 PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0800-087f claimed by vt8235 PM PCI quirk: region 0400-040f claimed by vt8235 SMB Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca) Setting up standard PCI resources PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: dde00000-dfefffff PREFETCH window: bdc00000-ddcfffff PCI: Setting latency timer of device 0000:00:01.0 to 64 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1153948040.848:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) vesafb: framebuffer at 0xc0000000, mapped to 0xd0880000, using 6144k, total 262144k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c000:e2e0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 47089 bytes,<6>...found (1024x768, 27542 bytes, v3). Console: switching to colour frame buffer device 124x44 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 169 0000:00:0a.0: ttyS1 at I/O 0xec28 (irq = 169) is a 8250 0000:00:0a.0: ttyS2 at I/O 0xec40 (irq = 169) is a 8250 0000:00:0a.0: ttyS3 at I/O 0xec50 (irq = 169) is a 8250 Couldn't register serial port 0000:00:0a.0: -28 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 input: PC Speaker as /class/input/input1 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 Using IPI Shortcut mode ACPI wakeup devices: PCI0 UAR1 USB1 USB2 USB3 EHCI AC9 MC9 ILAN SLPB ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 156k freed Write protecting the kernel read-only data: 281k logips2pp: Detected unknown logitech mouse model 0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... input: ImPS/2 Logitech Wheel Mouse as /class/input/input2 hda: WDC WD800BB-00JHA0, ATA DISK drive hdb: TOSHIBA DVD-ROM SD-R5112, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 Probing IDE interface ide1... ACPI: Processor [CPU1] (supports 16 throttling states) Attempting manual resume ReiserFS: hda2: found reiserfs format "3.6" with standard journal ReiserFS: hda2: using ordered data mode reiserfs: using flush barriers ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda2: checking transaction log (hda2) ReiserFS: hda2: Using r5 hash to sort names Adding 514040k swap on /dev/hda1. Priority:-1 extents:1 across:514040k parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] parport0: Printer, HEWLETT-PACKARD DESKJET 840C lp0: using parport0 (interrupt-driven). hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177 PCI: Via IRQ fixup for 0000:00:10.0, from 10 to 1 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 177, io base 0x0000e000 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.16.13-4-default uhci_hcd usb usb1: SerialNumber: 0000:00:10.0 via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker NET: Registered protocol family 23 via_ircc: module not supported by Novell, setting U taint flag. usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 177 PCI: Via IRQ fixup for 0000:00:10.1, from 5 to 1 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 177, io base 0x0000e400 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.16.13-4-default uhci_hcd usb usb2: SerialNumber: 0000:00:10.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 177 PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 1 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 177, io base 0x0000e800 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.16.13-4-default uhci_hcd usb usb3: SerialNumber: 0000:00:10.2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected Linux agpgart interface v0.101 (c) Dave Jones ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 185 PCI: Via IRQ fixup for 0000:00:12.0, from 10 to 9 eth0: VIA Rhine II at 0x1d400, 00:50:2c:a7:8d:4b, IRQ 185. eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 177 PCI: Via IRQ fixup for 0000:00:10.3, from 11 to 1 ehci_hcd 0000:00:10.3: EHCI Host Controller ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 usb 2-1: new full speed USB device using uhci_hcd and address 2 ehci_hcd 0000:00:10.3: irq 177, io mem 0xdfffff00 ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: new device found, idVendor=0000, idProduct=0000 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: EHCI Host Controller usb usb4: Manufacturer: Linux 2.6.16.13-4-default ehci_hcd usb usb4: SerialNumber: 0000:00:10.3 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected agpgart: Detected VIA P4M266x/P4N266 chipset agpgart: AGP aperture is 32M @ 0xe0000000 ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 193 PCI: Via IRQ fixup for 0000:00:11.5, from 10 to 1 PCI: Setting latency timer of device 0000:00:11.5 to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ALSA sound/pci/via82xx.c:1896: Using DXS as PCM Playback shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com dm-netlink version 0.0.2 loaded usb 3-1: new full speed USB device using uhci_hcd and address 2 usb 3-1: new device found, idVendor=1019, idProduct=0c55 usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-1: Product: USB Storage Device usb 3-1: Manufacturer: Generic usb 3-1: SerialNumber: 20020509145305401 usb 3-1: configuration #1 chosen from 1 choice SCSI subsystem initialized usb 2-1: new full speed USB device using uhci_hcd and address 3 Initializing USB Mass Storage driver... usb 2-1: new device found, idVendor=0572, idProduct=cb06 usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: ADSL USB MODEM usb 2-1: Manufacturer: - usb 2-1: SerialNumber: 08298061 usb 2-1: configuration #1 chosen from 1 choice scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage USB Mass Storage support registered. atm: module not supported by Novell, setting U taint flag. NET: Registered protocol family 8 NET: Registered protocol family 20 usbatm: module not supported by Novell, setting U taint flag. cxacru: module not supported by Novell, setting U taint flag. ATM dev 0: poll status: error -5 usbcore: registered new driver cxacru loop: loaded (max 8 devices) NTFS driver 2.1.26 [Flags: R/W MODULE]. NTFS volume version 3.1. AppArmor: AppArmor (version 2.0-19.43r6320) initialized audit(1153948052.564:2): AppArmor (version 2.0-19.43r6320) initialized NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (2047 buckets, 16376 max) - 232 bytes per conntrack Vendor: IC Model: USB Storage-CFC Rev: 301b Type: Direct-Access ANSI SCSI revision: 00 Vendor: IC Model: USB Storage-SMC Rev: 301b Type: Direct-Access ANSI SCSI revision: 00 Vendor: IC Model: USB Storage-MMC Rev: 301b Type: Direct-Access ANSI SCSI revision: 00 Vendor: IC Model: USB Storage-MSC Rev: 301b Type: Direct-Access ANSI SCSI revision: 00 usb-storage: device scan complete Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: Attached scsi removable disk sda sd 0:0:0:1: Attached scsi removable disk sdb sd 0:0:0:2: Attached scsi removable disk sdc sd 0:0:0:3: Attached scsi removable disk sdd sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:1: Attached scsi generic sg1 type 0 sd 0:0:0:2: Attached scsi generic sg2 type 0 sd 0:0:0:3: Attached scsi generic sg3 type 0 ATM dev 0: poll status: error -5 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Sleep Button (CM) [SLPB] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found eth0: link down ADDRCONF(NETDEV_UP): eth0: link is not ready ATM dev 0: poll status: error -5 NET: Registered protocol family 17 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 IA-32 Microcode Update Driver: v1.14 microcode: CPU0 updated from revision 0xb to 0xc, date = 04212005 IA-32 Microcode Update Driver v1.14 unregistered ATM dev 0: poll status: error -5 powernow: This module only works with AMD K7 CPUs ATM dev 0: poll status: error -5 bootsplash: status on console 0 changed to on lp0: ECP mode lp0: ECP mode lp0: ECP mode ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 st: Version 20050830, fixed bufsize 32768, s/g segs 256 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 ATM dev 0: poll status: error -5 tasc0@linux-mw0c:~>