Uncompressing Linux......................................... done,.Press ESC to enter BOOT MENU mode. Can't load valid rg_conf - using defaults Booting an active image in 3 seconds Uncompressing Linux.............................................................Linux version 2.4.21openrg-rmk1 #38 Fri Apr 14 15:41:08 CDT 2006 CPU: XScale-IXP4xx/IXC11xx revision 1 Machine: Intel IXP425 Jeeves Memory range 0x3fff000-0x4000000 is excluded because of PCI DMA bug On node 0 totalpages: 16384 zone(0): 16384 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS1,115200 root=/dev/ram0 rw nohalt Offline Using IXP425 Timer 0 as timer source Calibrating delay loop... 266.24 BogoMIPS Memory: 64MB = 64MB total Memory: 58872KB available (1435K code, 4431K data, 52K init) XScale Cache/TLB Locking Copyright(c) 2001 MontaVista Software, Inc. Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) Inode cache hash table entries: 4096 (order: 3, 32768 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) POSIX conformance testing by UNIFIX PCI: bus0: Fast back to back transfers disabled PCI: Via IRQ fixup for 00:10.0, from 28 to 12 PCI: Via IRQ fixup for 00:10.1, from 27 to 11 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Random: 0xf0831c9b pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enttyS00 at 0xff000003 (irq = 15) is a XScale UART ttyS01 at 0xff001003 (irq = 13) is a XScale UART RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize SCSI subsystem driver Revision: 1.00 ohci1394: $Rev$ Ben Collins ohci1394_0: SelfID buffer c4813000 is not aligned on 8Kb boundary... may cause pohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[25] MMIO=[4bfff800-4bffffff] Max Packet=usb.c: registered new driver usbdevfs usb.c: registered new driver hub ehci_hcd 00:10.2: VIA Technologies, Inc. USB 2.0 ehci_hcd 00:10.2: irq 26, pci mem c482e700 usb.c: new USB bus registered, assigned bus number 1 PCI: 00:10.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW. PCI: 00:10.2 PCI cache line size corrected to 32. ehci_hcd 00:10.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 hub.c: USB hub found hub.c: 4 ports detected host/usb-uhci.c: $Revision: 1.3.30.1 $ time 20:41:22 Apr 14 2006 host/usb-uhci.c: High bandwidth mode enabled host/usb-uhci.c: USB UHCI at I/O 0xffffff60, IRQ 28 host/usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected host/usb-uhci.c: USB UHCI at I/O 0xffffff40, IRQ 27 host/usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver usblp printer.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 28K VFS: Mounted root (ext2 filesystem). Freeing init memory: 52K Mounting cramfs image at 'cramfs' insmod: add-symbol-file PATH/kos_lib.o 0xc487e060 -s .data 0xc4884cb8 -s .bss 0xloading license key: Jungo loading license key: USR loading license key: USR loading license key: USR loading license key: USR insmod: add-symbol-file PATH/ixp425_flash_mod.o 0xc4887060 -s .dcfi_cmdset_0001data 0xc4887420 -s .bss 0xc4887460 Using buffer write method Using predefined MTD partitions. Creating 1 MTD partitions on "IXP425 Flash Bank 0": 0x00000000-0x01000000 : "openrg" Press ESC to enter BOOT MENU mode. insmod: add-symbol-file PATH/csr.o 0xc58ab060 -s .data 0xc58c6774 -s .bss 0xc58cModule init. insmod: add-symbol-file PATH/ixp425_csr_init_mod.o 0xc592d060 -s .data 0xc592d40Intel CSR QMGR & NPE(s) init done. insmod: add-symbol-file PATH/ixp425_eth_mod.o 0xc592f060 -s .datInitializing ix8a 0xc5930e78 -s .bss 0xc5930ef0 Found PHY 0 at 9 Found PHY 1 at 16 Found PHY 2 at 17 Found PHY 3 at 18 Found PHY 4 at 19 Found PHY 5 at 20 Found PHY 6 at 24 Found PHY 7 at 25 Found PHY 8 at 26 Found PHY 9 at 27 Found PHY 10 at 28 Found PHY 11 at 29 PHY 0 MAC address is: 04:04:04:04:04:04 PHY 1 MAC address is: 06:06:06:06:06:06 insmod: add-symbol-file PATH/igmp_proxy_mod.o 0xc5933060 -s .data 0xc5934488 -s4insmod: add-symbol-file PATH/log_chardev.o 0xc5936060 -s .data 0xc5936ab8 -s .b0insmod: add-symbol-file PATH/rg_bridge.o 0xc5939060 -s .data 0xc593d68c -s .bss0failed ipc connect Network is unreachable failed ipc connect Network is unreachable insmod: add-symbol-file PATH/tcp_mss.o 0xc5940060 -s .data 0xc5940260 -s .bss 0xinsmod: add-symbol-file PATH/jfw.o 0xc5942060 -s .data 0xc595d750 -s .bss 0xc595insmod: add-symbol-file PATH/rg_dhcp_pktfil.o 0xc5964060 -s .data 0xc59649a8 -s8insmod: add-symbol-file PATH/sbp2.o 0xc5966060 -s .data 0xc5969d78 -s .bss 0xc59sbp2: $Rev$ Ben Collins insmod: add-symbol-file PATH/rg_ipv4.o 0xc596c060 -s .data 0xc59IPV4 device drid6c220 -s .bss 0xc596c25e insmod: add-symbol-file PATH/krgldr_module.o 0xc596e060 -s .data 0xc596e240 -s 8insmod: add-symbol-file PATH/kleds_mod.o 0xc5970060 -s .data 0xc5970710 -s .bss0insmod: add-symbol-file PATH/jeeves_rtc7301_mod.o 0xc5972060 -s .data 0xc5972928 -s .bss 0xc597299c JEEVES_RTC7301: 2008-05-13 18:27:05 insmod: add-symbol-file PATH/nb_rt.o 0xc5976060 -s .data 0xc5976498 -s .bss 0xc5insmod: add-symbol-file PATH/ppp.o 0xc5978060 -s .data 0xc597f668 -s .bss 0xc597PHY 0 MAC address is: 00:c0:49:f4:31:11 PHY 0 MAC address is: 00:c0:49:f4:31:11 PHY 1 MAC address is: 00:c0:49:f4:31:12 PHY 1 MAC address is: 00:c0:49:f4:31:12 May 13 18:27:08 pluto[40]: Starting Pluto (FreeS/WAN Version 1.99) Username: admin Password: ****** USR8200>