RomBOOT

>
INFO : Low Level Init : OK
Starting main ... 

Load CE-BOOT from Flash to SDRAM

Jumping ...

Master Clock is 48054841 Hz

Press [ENTER] to launch image stored in flash or [SPACE] to cancel.

Initiating image launch in 5 seconds. 4 seconds. 3 seconds. 

Ethernet Boot Loader Configuration:

0) MAC address: 02:02:03:04:05:06
1) IP address: 192.168.100.128
2) Subnet mask: 255.255.255.0
3) Boot delay: 5 seconds
4) DHCP: (Enabled)
5) Reset to factory default configuration
6) Launch existing flash resident image at startup
7) Download image to SDRAM
8) Frequency settings (core at 181, bus divider 2)
A) test RTC: 
D) Download image now
L) Launch existing flash resident image now
N) Nand Flash menu


Enter your selection: d
System ready!
Preparing for download...
Master Clock is 50070885 Hz
---------------------------------------
--- Configuring Chip Select 2       ---
---------------------------------------
---         Desired timings         ---
---------------------------------------
dwNWE_SETUP      40
dwNCS_WR_SETUP   20
dwNRD_SETUP      40
dwNCS_RD_SETUP   20
dwNWE_PULSE      80
dwNCS_WR_PULSE   80
dwNRD_PULSE      80
dwNCS_RD_PULSE   80
dwNRD_CYCLE      160
dwNWE_CYCLE      160
dwClockPeriod_ns 19
---------------------------------------
---           Real timings          ---
---------------------------------------
dwNWE_SETUP      57
dwNCS_WR_SETUP   38
dwNRD_SETUP      57
dwNCS_RD_SETUP   38
dwNWE_PULSE      95
dwNCS_WR_PULSE   95
dwNRD_PULSE      95
dwNCS_RD_PULSE   95
dwNRD_CYCLE      209
dwNWE_CYCLE      209
INFO: Trying to initialize the external DM9000 NIC...
Master Clock is 50070885 Hz
---------------------------------------
--- Configuring Chip Select 2       ---
---------------------------------------
---         Desired timings         ---
---------------------------------------
dwNWE_SETUP      40
dwNCS_WR_SETUP   20
dwNRD_SETUP      40
dwNCS_RD_SETUP   20
dwNWE_PULSE      80
dwNCS_WR_PULSE   80
dwNRD_PULSE      80
dwNCS_RD_PULSE   80
dwNRD_CYCLE      160
dwNWE_CYCLE      160
dwClockPeriod_ns 19
---------------------------------------
---           Real timings          ---
---------------------------------------
dwNWE_SETUP      57
dwNCS_WR_SETUP   38
dwNRD_SETUP      57
dwNCS_RD_SETUP   38
dwNWE_PULSE      95
dwNCS_WR_PULSE   95
dwNRD_PULSE      95
dwNCS_RD_PULSE   95
dwNRD_CYCLE      209
dwNWE_CYCLE      209
*** Initialization of the DM9000 Ethernet controler ****

Waiting for Link by the PHY
DM9000 Init, val du PHY : 10 Mbit/s HALF DUPLEX 
DM9000 Init, val du MAC : 10 Mbit/s 
Link OK by the MAC
DM9000 Init Mac address is provided : 0x202 0x403 0x605 
INFO: DM9000 Ethernet controller initialized.
INFO: Using device name: 'SAM9261_1286'
INFO: MAC address: 2-2-3-4-5-6
InitDHCP():: Calling ProcessDHCP()
ProcessDHCP()::DHCP_INIT
Got Response from DHCP server, IP address: 192.168.0.110

ProcessDHCP()::DHCP IP Address Resolved as 192.168.0.110, netmask: 255.255.255.0
Lease time: 86400 seconds
Got Response from DHCP server, IP address: 192.168.0.110
No ARP response in 2 seconds, assuming ownership of 192.168.0.110
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Locked Down Link 1
Src IP 192.168.0.110 Port 0800   Dest IP 192.168.0.88 Port 0B85
EthDown::TFTPD_OPEN::boot.bin
-EbootSendBootmeAndWaitForTftp
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXrom_offset=0x0.
XXXROMHDR at Address 80059044h
Download successful!  Jumping to image at 0x8005A000 (physical 0x2005A000)...
Got EDBG_CMD_JUMPIMG
Got EDBG_CMD_CONFIG, flags:0x00000000



5Waiting for Link by the PHY

DM9000 Init, val du PHY : 10 Mbit/s HALF DUPLEX 

DM9000 Init, val du MAC : 10 Mbit/s 

Link OK by the MAC

DM9000 Init Mac address is provided : 0x202 0x403 0x605 

KITL: *** Device Name SAM9261_1286 ***
+OALIntrRequestIrqs(0x80d3429c->0/0/0x30000000/0, 0xffffc698, 0xffffc694)
IRQ for DM9000
-OALIntrRequestIrqs(rc = 1)
+OALIntrRequestSysIntr(1, 0xffffc694 , 0x00000008)
-OALIntrRequestSysIntr(sysIntr = 16)
KITL: DHCP get/renew device IP: 192.168.0.110
VBridge:: built on [Jun 14 2008] time [17:31:13]

VBridgeInit()...TX = [16384] bytes -- Rx = [16384] bytes

Tx buffer [0xA0D8F000] to [0xA0D93000].

Rx buffer [0xA0D93020] to [0xA0D97020].

VBridge:: NK add MAC: [2-2-3-4-5-6]

KITL: Connected host  IP: 192.168.0.88  Port: 2948
KITLGlobalState == 0x61