Sun Cobalt - Smaller, Bluer, Better, and Free Firmware version 2.10.3-ext3 Current date: Jul 29 14:29:39 UTC 2006 ROM build info: Thu Mar 11 08:51:36 MST 2004 . System serial number: Uninitialized System type: 3000 series system, Version 1 board Silicon serial number: ad000007499bb301 Monitor: 153536 bytes Memory: 512 MB CPU: 1 processor(s) detected CPU 0: AuthenticAMD 497MHz (5 x 100MHz host bus) [BSP] Initializing flash: done Flash Bank 0: AMD AM29F080B 1024KB (01:d5) Flash Bank 1: not installed. Mounting ROM fs: done Initializing PCI: done Host Bus: 0 (device 0b:02) [33MHz] Device: 00:00 10b9:1541 Acer Labs M1541 Aladdin V Host Bridge Device: 01:00 10b9:5243 Acer Labs M5243 AGP Controller Device: 02:00 10b9:5237 Acer Labs M5237 USB Controller (IRQ 6) Device: 03:00 10b9:7101 Acer Labs M7101 PMU Device: 07:00 10b9:1533 Acer Labs M1543 Aladdin V PCI-ISA Bridge Device: 0e:00 1000:000f Symbios Logic SYM53C875 SCSI Controller (IRQ 12) Device: 0f:00 10b9:5229 Acer Labs M5229 TXpro IDE Controller (IRQ 14) Device: 10:00 8086:1209 Intel 82559ER EEPro100 Fast Ethernet (IRQ 11) Device: 12:00 8086:1209 Intel 82559ER EEPro100 Fast Ethernet (IRQ 10) Bridged Bus: 1 (bridge: 00:01:00) Initializing ethernet: 2 controller(s) found Intel 82559ER Found at port 0xfd80, MAC: 00:10:e0:01:be:b3 Intel 82559ER Found at port 0xfd40, MAC: 00:10:e0:01:be:b2 Initializing IDE: found ALI M5229 at 00:78 scanning ide0: master scanning ide1: IDE: stabilizing spinup: 100% Checking Memory: done Press spacebar to enter ROM mode Booting default method - From disk Enabling L2 cache: done First stage kernel (Linux): Decompressing - done ERROR: cannot relocate with filesize 0 command line: 'console=ttyS0,115200 debug mem=22M cobalt_boot_image=/boot/vmlinux.bz2,/vmlinux.bz2,/boot/' booting kernel... Linux version 2.4.25-ROM (duncan@atherton) (gcc version 3.3.3 (Debian 20040306)) #1 Thu Mar 11 08:47:53 M4 BIOS-provided physical RAM map: BIOS-e801: 0000000000000000 - 000000000009f000 (usable) BIOS-e801: 0000000000100000 - 0000000020000000 (usable) user-defined physical RAM map: user: 0000000000000000 - 000000000009f000 (usable) user: 0000000000100000 - 0000000001600000 (usable) 22MB LOWMEM available. On node 0 totalpages: 5632 zone(0): 4096 pages. zone(1): 1536 pages. zone(2): 0 pages. DMI not present. Kernel command line: console=ttyS0,115200 debug mem=22M cobalt_boot_image=/boot/vmlinux.bz2,/vmlinux.bz2, Initializing CPU#0 Detected 498.011 MHz processor. Calibrating delay loop... 992.87 BogoMIPS Memory: 20208k/22528k available (1141k kernel code, 1932k reserved, 244k data, 100k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) Enabling new style K6 write allocation for 22 Mb CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line) CPU: After generic, caps: 008021bf 808029bf 00000000 00000002 CPU: Common caps: 008021bf 808029bf 00000000 00000002 CPU: AMD-K6(tm) 3D processor stepping 0c Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: AMD K6 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 Journalled Block Device driver loaded pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10f Non-volatile memory driver v1.2 loop: loaded (max 8 devices) eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others eth0: Invalid EEPROM checksum 0xc59e, check settings before activating this device! eth0: PCI device 8086:1209, 00:10:E0:01:BE:B3, IRQ 11. Receiver lock-up bug exists -- enabling work-around. Board assembly 000000-000, Physical connectors present: Primary interface chip None PHY #0. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xdbd8681d). Receiver lock-up workaround activated. eth1: Invalid EEPROM checksum 0xc49e, check settings before activating this device! eth1: PCI device 8086:1209, 00:10:E0:01:BE:B2, IRQ 10. Receiver lock-up bug exists -- enabling work-around. Board assembly 000000-000, Physical connectors present: Primary interface chip None PHY #0. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xdbd8681d). Receiver lock-up workaround activated. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ALI15X3: IDE controller at PCI slot 00:0f.0 ALI15X3: chipset revision 193 ALI15X3: 100% native mode on irq 14 ide0: BM-DMA at 0xfdd0-0xfdd7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xfdd8-0xfddf, BIOS settings: hdc:DMA, hdd:DMA hda: Maxtor 2R010H1, ATA DISK drive ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx blk: queue c0298fa0, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0xfdf8-0xfdff,0xfdf6 on irq 14 hda: attached ide-disk driver. hda: host protected area => 1 hda: 20011824 sectors (10246 MB) w/2048KiB Cache, CHS=19853/16/63, UDMA(33) Partition check: hda: [PTBL] [1245/255/63] hda1 hda2 hda3 md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 755.600 MB/sec 32regs : 430.000 MB/sec pII_mmx : 1067.200 MB/sec p5_mmx : 1028.800 MB/sec raid5: using function: pII_mmx (1067.200 MB/sec) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 2048) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 100k freed Warning: unable to open an initial console. BOOTLOADER: Mapping in physical locations BOOTLOADER: load_addr=0xc2004000 ret_data=0xc2205cc4 BOOTLOADER: opening "/boot/vmlinux.bz2" BOOTLOADER: opening "/vmlinux.bz2" BOOTLOADER: reading "/vmlinux.bz2" BOOTLOADER: read 1168670bytes BOOTLOADER: unmounting / BOOTLOADER: calling reboot notifiers md: stopping all md devices. flushing ide devices: hda BOOTLOADER: mapping 22M-32M for ride home BOOTLOADER: disabling interrupts BOOTLOADER: flushing cache BOOTLOADER: Leap of faith! Back in ramcode: done Second stage kernel: Decompressing - done ERROR: cannot relocate with filesize 0 ERROR: cannot relocate with filesize 0 command line: 'console=ttyS0,115200 debug ip=off ' booting kernel... Linux version 2.6.12-gentoo-cobalt-r6 (root@livecd) (gcc version 3.3.5-20050130 (Gentoo 3.3.5.20050130-r15 BIOS-provided physical RAM map: BIOS-e801: 0000000000000000 - 000000000009f000 (usable) BIOS-e801: 0000000000100000 - 0000000020000000 (usable) 512MB LOWMEM available. On node 0 totalpages: 131072 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126976 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI not present. Allocating PCI resources starting at 20000000 (gap: 20000000:e0000000) Built 1 zonelists Kernel command line: console=ttyS0,115200 debug ip=off Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 497.810 MHz processor. Using tsc for high-res timesource Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 516208k/524288k available (1750k kernel code, 7612k reserved, 664k data, 124k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 987.13 BogoMIPS (lpj=493568) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 008021bf 808029bf 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 008021bf 808029bf 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line) CPU: After all inits, caps: 008021bf 808029bf 00000000 00000002 00000000 00000000 00000000 CPU: AMD-K6(tm) 3D processor stepping 0c Checking 'hlt' instruction... OK. NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) inotify device minor=63 Activating ISA DMA hang workarounds. Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 alim7101_wdt: Steve Hill . alim7101_wdt: WDT driver for ALi M7101 initialised. timeout=30 sec (nowayout=0) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 6 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A io scheduler noop registered io scheduler deadline registered e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation e100: Modified by to ignore bad EEPROM checksums e100: 0000:00:10.0: e100_eeprom_load: EEPROM corrupted, ignoring and moving on e100: 0000:00:10.0: e100_eeprom_load: Caclulated Checksum: F51C e100: 0000:00:10.0: e100_eeprom_load: EEPROM Checksum: 0 e100: eth0: e100_probe: addr 0xf7ffc000, irq 11, MAC addr 00:10:E0:01:BE:B3 e100: 0000:00:12.0: e100_eeprom_load: EEPROM corrupted, ignoring and moving on e100: 0000:00:12.0: e100_eeprom_load: Caclulated Checksum: F61C e100: 0000:00:12.0: e100_eeprom_load: EEPROM Checksum: 0 e100: eth1: e100_probe: addr 0xf7fbf000, irq 10, MAC addr 00:10:E0:01:BE:B2 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ALI15X3: IDE controller at PCI slot 0000:00:0f.0 ALI15X3: chipset revision 193 ALI15X3: 100% native mode on irq 14 ide0: BM-DMA at 0xfdd0-0xfdd7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xfdd8-0xfddf, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: Maxtor 2R010H1, ATA DISK drive ide0 at 0xfdf8-0xfdff,0xfdf6 on irq 14 Probing IDE interface ide1... hda: max request size: 128KiB hda: 20011824 sectors (10246 MB) w/2048KiB Cache, CHS=19853/16/63, UDMA(33) hda: cache flushes not supported hda: hda1 hda2 hda3 sym0: <875> rev 0x4 at pci 0000:00:0e.0 irq 12 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym0: SCSI BUS has been reset. scsi0 : sym-2.2.0 st: Version 20050312, fixed bufsize 32768, s/g segs 256 usbmon: debugs is not available ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd 0000:00:02.0: ALi Corporation USB 1.1 Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 6, io mem 0xf7fff000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 Cobalt system type is Pacifica Cobalt Networks LED driver 1.0 (modified by jeff@404ster.com) Cobalt Networks LCD driver 4.0 (modified by jeff@404ster.com) Cobalt Networks Serial Number driver 1.6 (modified by jeff@404ster.com) Cobalt Networks Watchdog Timer driver 1.0 (modified by jeff@404ster.com) Cobalt Networks Sensor driver 1.0 (modified by jeff@404ster.com) Cobalt Networks RAM Info driver 1.0 (modified by jeff@404ster.com) ReiserFS: hda2: found reiserfs format "3.6" with standard journal ReiserFS: hda2: using ordered data mode ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max b0 ReiserFS: hda2: checking transaction log (hda2) Unable to handle kernel NULL pointer dereference at virtual address 00000004 printing eip: c019bcec *pde = 00000000 Oops: 0000 [#1] PREEMPT Modules linked in: CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00010246 (2.6.12-gentoo-cobalt-r6) eax: 00000000 ebx: dfde7e40 ecx: 00000001 edx: c1764800 esi: c153fd5c edi: c153fd5c ebp: c14f9c40 esp: c153fc3c ds: 007b es: 007b ss: 0068 Process swapper (pid: 1, threadinfo=c153e000 task=c14e7a00) Stack: c14ee530 c03065b0 c13fc460 00000000 c0132625 c0306564 c13fc460 c13fc460 0000001e c0306590 0000001e 00000046 c01326b3 c0306564 00000046 c0306564 c0306580 c0132567 00000000 00000000 0000002c c0132af6 c13fb8e0 00000000 Call Trace: [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] Code: 57 56 53 81 ec dc 00 00 00 c7 44 24 48 00 00 00 00 ff b4 24 f8 00 00 00 e8 a2 fb ff ff 5f 8b 94 24 <0>Kernel panic - not syncing: Attempted to kill init!