bonus:/usr/src/linux # lspci -vv
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML E
xpress Processor to DRAM Controller (rev 03)
        Subsystem: Hewlett-Packard Company Unknown device 3080
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
 ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbo
rt- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information

00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/G
MS/910GML Express Graphics Controller (rev 03) (prog-if 00 [VGA])
        Subsystem: Hewlett-Packard Company Unknown device 3080
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
 ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbo
rt- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 217
        Region 0: Memory at b0080000 (32-bit, non-prefetchable) [si
ze=512K]
        Region 1: I/O ports at 1800 [size=8]
        Region 2: Memory at c0000000 (32-bit, prefetchable) [size=2
56M]
        Region 3: Memory at b0000000 (32-bit, non-prefetchable) [si
ze=256K]
        Capabilities: [d0] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,
D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910G
ML Express Graphics Controller (rev 03)
        Subsystem: Hewlett-Packard Company Unknown device 3080
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
 ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbo
rt- <TAbort- <MAbort- >SERR- <PERR-
        Region 0: Memory at 32000000 (32-bit, non-prefetchable) [di
sabled] [size=512K]
        Capabilities: [d0] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,
D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (IC
H6 Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Unknown device 3080
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
 ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TA
bort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 201
        Region 4: I/O ports at 1820 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (IC
H6 Family) USB UHCI #2 (rev 03) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Unknown device 3080
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
 ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TA
bort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 209
        Region 4: I/O ports at 1840 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (IC
H6 Family) USB UHCI #3 (rev 03) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Unknown device 3080
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
 ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TA
bort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin C routed to IRQ 177
        Region 4: I/O ports at 1860 [size=32]

00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (IC
H6 Family) USB UHCI #4 (rev 03) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Unknown device 3080
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
 ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TA
bort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin D routed to IRQ 217
        Region 4: I/O ports at 1880 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (IC
H6 Family) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
        Subsystem: Hewlett-Packard Company Unknown device 3080
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
 ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TA
bort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 201
        Region 0: Memory at b0040000 (32-bit, non-prefetchable) [si
ze=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0
+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev
d3) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
 ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbo
rt- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=06, subordinate=06, sec-latency=
216
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: b0100000-b01fffff
        Prefetchable memory behind bridge: 0000000030000000-0000000
031f00000
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TA
bort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2
B-
        Capabilities: [50] #0d [0000]

00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/
FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
        Subsystem: Hewlett-Packard Company Unknown device 3080
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
 ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TA
bort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 193
        Region 0: I/O ports at 1c00 [size=256]
        Region 1: I/O ports at 18c0 [size=64]
        Region 2: Memory at b0040800 (32-bit, non-prefetchable) [si
ze=512]
        Region 3: Memory at b0040400 (32-bit, non-prefetchable) [si
ze=256]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0
+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family
) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
        Subsystem: Hewlett-Packard Company Unknown device 3080
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
 ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TA
bort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 169
        Region 0: I/O ports at 2400 [size=256]
        Region 1: I/O ports at 2000 [size=128]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0
+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interfac
e Bridge (rev 03)
        Subsystem: Hewlett-Packard Company Unknown device 3080
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
 ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TA
bort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH
6 Family) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
        Subsystem: Hewlett-Packard Company Unknown device 3080
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
 ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TA
bort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 177
        Region 0: I/O ports at <unassigned>
        Region 1: I/O ports at <unassigned>
        Region 2: I/O ports at <unassigned>
        Region 3: I/O ports at <unassigned>
        Region 4: I/O ports at 1810 [size=16]

00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family
) SMBus Controller (rev 03)
        Subsystem: Hewlett-Packard Company Unknown device 3080
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
 ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TA
bort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 3
        Region 4: I/O ports at 20a0 [size=32]

06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-81
39/8139C/8139C+ (rev 10)
        Subsystem: Hewlett-Packard Company Unknown device 3080
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
 ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TA
bort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 217
        Region 0: I/O ports at 3000 [size=256]
        Region 1: Memory at b0108000 (32-bit, non-prefetchable) [si
ze=256]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0
-,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

06:06.0 Network controller: Broadcom Corporation BCM4318 [AirForce
One 54g] 802.11g Wireless LAN Controller (rev 02)
        Subsystem: Hewlett-Packard Company Unknown device 1355
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
 ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbo
rt- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32
        Interrupt: pin A routed to IRQ 4
        Region 0: Memory at b0104000 (32-bit, non-prefetchable) [si
ze=8K]

06:09.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Cont
roller
        Subsystem: Hewlett-Packard Company Unknown device 3080
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
 ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TA
bort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 168, Cache Line Size 20
        Interrupt: pin A routed to IRQ 169
        Region 0: Memory at b010a000 (32-bit, non-prefetchable) [si
ze=4K]
        Bus: primary=06, secondary=07, subordinate=0a, sec-latency=
176
        Memory window 0: 30000000-31fff000 (prefetchable)
        Memory window 1: 34000000-35fff000
        I/O window 0: 00003400-000034ff
        I/O window 1: 00003800-000038ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt-
PostWrite+
        16-bit legacy interface ports at 0001

06:09.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE
 1394 Host Controller (prog-if 10 [OHCI])
        Subsystem: Hewlett-Packard Company Unknown device 3080
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
 ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TA
bort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (750ns min, 1000ns max), Cache Line Size 08
        Interrupt: pin C routed to IRQ 185
        Region 0: Memory at b0108800 (32-bit, non-prefetchable) [si
ze=2K]
        Region 1: Memory at b0100000 (32-bit, non-prefetchable) [si
ze=16K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,
D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME+

06:09.3 Mass storage controller: Texas Instruments PCIxx21 Integrat
ed FlashMedia Controller
        Subsystem: Hewlett-Packard Company Unknown device 3080
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
 ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TA
bort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 57 (1750ns min, 1000ns max), Cache Line Size 08
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at b0106000 (32-bit, non-prefetchable) [si
ze=8K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,
D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

06:09.4 Class 0805: Texas Instruments PCI6411, PCI6421, PCI6611, PC
I6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) Contr
oller
        Subsystem: Hewlett-Packard Company Unknown device 3080
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
 ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TA
bort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 57 (1750ns min, 1000ns max), Cache Line Size 08
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at b0109400 (32-bit, non-prefetchable) [si
ze=256]
        Region 1: Memory at b0109000 (32-bit, non-prefetchable) [si
ze=256]
        Region 2: Memory at b0108400 (32-bit, non-prefetchable) [si
ze=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,                                      D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

bonus:/usr/src/linux #