smartctl version 5.37 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Maxtor DiamondMax Plus 40 series (Ultra ATA 66 and Ultra ATA 100) Device Model: Maxtor 51024H2 Serial Number: K21AT54C Firmware Version: DAC10SC0 User Capacity: 10,239,860,736 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 0 Local Time is: Sat Jul 19 18:22:59 2008 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 9) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 412317346716 3 Spin_Up_Time 0x0027 231 231 063 Pre-fail Always - 91 4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 1125 5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 0 6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0 7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 72814 8 Seek_Time_Performance 0x0027 253 244 187 Pre-fail Always - 144542829434268 9 Power_On_Minutes 0x0032 206 206 000 Old_age Always - 16414h+47m 10 Spin_Retry_Count 0x002b 252 252 223 Pre-fail Always - 4294967378 11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 70 12 Power_Cycle_Count 0x0032 252 252 000 Old_age Always - 604 196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0 197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0 198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0008 193 181 000 Old_age Offline - 85899373189 200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 342668 201 Soft_Read_Error_Rate 0x000a 253 223 000 Old_age Always - 85899832220 202 TA_Increase_Count 0x000a 253 252 000 Old_age Always - 486300 203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 486300 204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 486300 205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 486300 207 Spin_High_Current 0x002a 252 252 000 Old_age Always - 4294967378 208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 82 209 Offline_Seek_Performnce 0x0024 253 253 000 Old_age Offline - 0 96 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 97 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 98 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 SMART Error Log Version: 1 Warning: ATA error count 2052 inconsistent with error log pointer 5 ATA Error Count: 2052 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2052 occurred at disk power-on lifetime: 15388 hours (641 days + 4 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 00 00 00 f0 08 00:35:57.408 READ DMA f8 00 00 01 00 00 f0 08 00:35:57.392 READ NATIVE MAX ADDRESS ec 00 00 01 00 00 b0 0a 00:35:57.392 IDENTIFY DEVICE ef 03 45 00 00 00 b0 0a 00:35:57.376 SET FEATURES [Set transfer mode] f8 00 00 01 00 00 f0 08 00:35:57.360 READ NATIVE MAX ADDRESS Error 2051 occurred at disk power-on lifetime: 15388 hours (641 days + 4 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 00 00 00 f0 08 00:35:57.216 READ DMA f8 00 00 01 00 00 f0 08 00:35:57.200 READ NATIVE MAX ADDRESS ec 00 00 01 00 00 b0 0a 00:35:57.200 IDENTIFY DEVICE ef 03 45 00 00 00 b0 0a 00:35:57.200 SET FEATURES [Set transfer mode] f8 00 00 01 00 00 f0 08 00:35:57.168 READ NATIVE MAX ADDRESS Error 2050 occurred at disk power-on lifetime: 15388 hours (641 days + 4 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 00 00 00 f0 08 00:35:57.024 READ DMA f8 00 00 01 00 00 f0 08 00:35:57.008 READ NATIVE MAX ADDRESS ec 00 00 01 00 00 b0 0a 00:35:57.008 IDENTIFY DEVICE ef 03 45 00 00 00 b0 0a 00:35:57.008 SET FEATURES [Set transfer mode] f8 00 00 01 00 00 f0 08 00:35:56.976 READ NATIVE MAX ADDRESS Error 2049 occurred at disk power-on lifetime: 15388 hours (641 days + 4 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 00 00 00 f0 08 00:35:56.832 READ DMA f8 00 00 01 00 00 f0 08 00:35:56.816 READ NATIVE MAX ADDRESS ec 00 00 01 00 00 b0 0a 00:35:56.800 IDENTIFY DEVICE ef 03 45 00 00 00 b0 0a 00:35:56.800 SET FEATURES [Set transfer mode] f8 00 00 01 00 00 f0 08 00:35:56.784 READ NATIVE MAX ADDRESS Error 2048 occurred at disk power-on lifetime: 15388 hours (641 days + 4 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 00 00 00 f0 08 00:32:41.280 READ DMA f8 00 00 01 00 00 f0 08 00:32:41.264 READ NATIVE MAX ADDRESS ec 00 00 01 00 00 b0 0a 00:32:41.264 IDENTIFY DEVICE ef 03 45 00 00 00 b0 0a 00:32:41.248 SET FEATURES [Set transfer mode] f8 00 00 01 00 00 f0 08 00:32:41.232 READ NATIVE MAX ADDRESS SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging