[ 0.000000] Linux version 2.6.26 (root@home) (gcc version 4.3.1 (Debian 4.3.1-6) ) #47 SMP PREEMPT Wed Jul 16 23:05:19 CEST 2008 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.26 root=/dev/sda1 ro [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable) [ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 851680) 1 entries of 256 used [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used [ 0.000000] max_pfn_mapped = 1245184 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] init_memory_mapping [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000F6C00, 0014 (r0 GBT ) [ 0.000000] ACPI: RSDT CFEE3040, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: FACP CFEE30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: DSDT CFEE3180, 4B32 (r1 GBT GBTUACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS CFEE0000, 0040 [ 0.000000] ACPI: HPET CFEE7E00, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98) [ 0.000000] ACPI: MCFG CFEE7E80, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: APIC CFEE7D00, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: SSDT CFEE7F00, 015C (r1 PmRef Cpu0Ist 3000 INTL 20040311) [ 0.000000] ACPI: SSDT CFEE84B0, 0324 (r1 PmRef CpuPm 3000 INTL 20040311) [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 851680) 1 entries of 256 used [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used [ 0.000000] early res: 0 [0-fff] BIOS data page [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE [ 0.000000] early res: 2 [200000-61cb73] TEXT DATA BSS [ 0.000000] early res: 3 [9e800-fffff] BIOS reserved [ 0.000000] early res: 4 [8000-dfff] PGTABLE [ 0.000000] [ffffe20000000000-ffffe20002dfffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0 [ 0.000000] [ffffe20002e00000-ffffe200043fffff] PMD -> [ffff81000c000000-ffff81000d5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1245184 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 158 [ 0.000000] 0: 256 -> 851680 [ 0.000000] 0: 1048576 -> 1245184 [ 0.000000] On node 0 totalpages: 1048190 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1160 pages reserved [ 0.000000] DMA zone: 2782 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833304 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000 [ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000 [ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000 [ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e6000000 (gap: e4000000:1ac00000) [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 35076 bytes of per cpu data [ 0.000000] NR_CPUS: 4, nr_cpu_ids: 4 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1030006 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.26 root=/dev/sda1 ro [ 0.000000] Initializing CPU#0 [ 0.000000] Preemptible RCU implementation. [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] time.c: Detected 2399.988 MHz processor. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000999] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000999] Checking aperture... [ 0.000999] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000999] Placing software IO TLB between 0x4000000 - 0x8000000 [ 0.000999] Memory: 4045732k/4980736k available (2149k kernel code, 146340k reserved, 1233k data, 252k init) [ 0.000999] CPA: page pool initialized 1 of 1 pages preallocated [ 0.000999] hpet clockevent registered [ 0.060891] Calibrating delay using timer specific routine.. 4803.03 BogoMIPS (lpj=2401518) [ 0.060990] Mount-cache hash table entries: 256 [ 0.060990] Initializing cgroup subsys ns [ 0.060990] Initializing cgroup subsys cpuacct [ 0.060990] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.060990] CPU: L2 cache: 4096K [ 0.060990] CPU: Physical Processor ID: 0 [ 0.060990] CPU: Processor Core ID: 0 [ 0.060990] CPU0: Thermal monitoring enabled (TM2) [ 0.060990] using mwait in idle threads. [ 0.061739] ACPI: Core revision 20080321 [ 0.077988] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.077988] Using local APIC timer interrupts. [ 0.078987] APIC timer calibration result 16666616 [ 0.078987] Detected 16.666 MHz APIC timer. [ 0.078987] Booting processor 1/2 ip 6000 [ 0.088986] Initializing CPU#1 [ 0.088986] Calibrating delay using timer specific routine.. 4799.89 BogoMIPS (lpj=2399947) [ 0.088986] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.088986] CPU: L2 cache: 4096K [ 0.088986] CPU: Physical Processor ID: 0 [ 0.088986] CPU: Processor Core ID: 2 [ 0.088986] CPU1: Thermal monitoring enabled (TM2) [ 0.088986] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.150976] CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.150976] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.151976] Booting processor 2/3 ip 6000 [ 0.162975] Initializing CPU#2 [ 0.162975] Calibrating delay using timer specific routine.. 4799.89 BogoMIPS (lpj=2399949) [ 0.162975] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.162975] CPU: L2 cache: 4096K [ 0.162975] CPU: Physical Processor ID: 0 [ 0.162975] CPU: Processor Core ID: 3 [ 0.162975] CPU2: Thermal monitoring enabled (TM2) [ 0.162975] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.223203] CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.223614] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.224965] Booting processor 3/1 ip 6000 [ 0.235964] Initializing CPU#3 [ 0.235964] Calibrating delay using timer specific routine.. 4799.60 BogoMIPS (lpj=2399802) [ 0.235964] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.235964] CPU: L2 cache: 4096K [ 0.235964] CPU: Physical Processor ID: 0 [ 0.235964] CPU: Processor Core ID: 1 [ 0.235964] CPU3: Thermal monitoring enabled (TM2) [ 0.235964] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.297162] CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.297574] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.298815] Brought up 4 CPUs [ 0.298815] Total of 4 processors activated (19202.43 BogoMIPS). [ 0.298815] CPU0 attaching sched-domain: [ 0.298815] domain 0: span 0,3 [ 0.298815] groups: 0 3 [ 0.298815] domain 1: span 0-3 [ 0.298815] groups: 0,3 1-2 [ 0.298815] CPU1 attaching sched-domain: [ 0.298815] domain 0: span 1-2 [ 0.298815] groups: 1 2 [ 0.298815] domain 1: span 0-3 [ 0.298815] groups: 1-2 0,3 [ 0.298815] CPU2 attaching sched-domain: [ 0.298815] domain 0: span 1-2 [ 0.298815] groups: 2 1 [ 0.298815] domain 1: span 0-3 [ 0.298815] groups: 1-2 0,3 [ 0.298815] CPU3 attaching sched-domain: [ 0.298815] domain 0: span 0,3 [ 0.298815] groups: 3 0 [ 0.298815] domain 1: span 0-3 [ 0.298815] groups: 0,3 1-2 [ 0.299815] net_namespace: 1168 bytes [ 0.299815] Booting paravirtualized kernel on bare hardware [ 0.299815] NET: Registered protocol family 16 [ 0.299815] No dock devices found. [ 0.300815] ACPI: bus type pci registered [ 0.300815] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 [ 0.300815] PCI: MCFG area at e0000000 reserved in E820 [ 0.303814] PCI: Using MMCONFIG at e0000000 - e3ffffff [ 0.303814] PCI: Using configuration type 1 for base access [ 0.305869] ACPI: EC: Look up EC in DSDT [ 0.311404] ACPI: Interpreter enabled [ 0.311446] ACPI: (supports S0 S3 S4 S5) [ 0.311594] ACPI: Using IOAPIC for interrupt routing [ 0.317544] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.318615] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.318615] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.319487] PCI: Transparent bridge - 0000:00:1e.0 [ 0.319552] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.319630] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.319721] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.320501] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.320593] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.336954] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.336954] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.337464] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.337972] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) [ 0.338433] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.338990] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.339450] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) [ 0.340008] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.341158] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.341158] pnp: PnP ACPI init [ 0.341158] ACPI: bus type pnp registered [ 0.343225] pnp: PnP ACPI: found 12 devices [ 0.343225] ACPI: ACPI bus type pnp unregistered [ 0.344225] SCSI subsystem initialized [ 0.344225] libata version 3.00 loaded. [ 0.344225] PCI: Using ACPI for IRQ routing [ 0.351029] PCI-GART: No AMD northbridge found. [ 0.351076] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.351252] hpet0: 4 64-bit timers, 14318180 Hz [ 0.353471] ACPI: RTC can wake from S4 [ 0.365866] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.365914] system 00:01: ioport range 0x290-0x29f has been reserved [ 0.365960] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.366012] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.366053] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.370173] system 00:08: ioport range 0x400-0x4bf could not be reserved [ 0.370218] system 00:09: iomem range 0xe0000000-0xe3ffffff could not be reserved [ 0.370271] system 00:0a: iomem range 0xd2000-0xd3fff has been reserved [ 0.370312] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved [ 0.370354] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved [ 0.370396] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved [ 0.370438] system 00:0a: iomem range 0xcfee0000-0xcfefffff could not be reserved [ 0.370488] system 00:0a: iomem range 0x0-0x9ffff could not be reserved [ 0.370539] system 00:0a: iomem range 0x100000-0xcfedffff could not be reserved [ 0.370589] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.370647] system 00:0a: iomem range 0xfed10000-0xfed1dfff could not be reserved [ 0.370697] system 00:0a: iomem range 0xfed20000-0xfed8ffff could not be reserved [ 0.370746] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.370796] system 00:0a: iomem range 0xffb00000-0xffb7ffff could not be reserved [ 0.370846] system 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved [ 0.371167] system 00:0a: iomem range 0xe0000-0xeffff has been reserved [ 0.371897] PCI: Bridge: 0000:00:01.0 [ 0.371897] IO window: b000-bfff [ 0.371897] MEM window: 0xe4000000-0xe6ffffff [ 0.371897] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff [ 0.371897] PCI: Bridge: 0000:00:1c.0 [ 0.371897] IO window: 9000-9fff [ 0.371897] MEM window: disabled. [ 0.371897] PREFETCH window: disabled. [ 0.371897] PCI: Bridge: 0000:00:1c.3 [ 0.371897] IO window: a000-afff [ 0.371938] MEM window: disabled. [ 0.371977] PREFETCH window: disabled. [ 0.372018] PCI: Bridge: 0000:00:1c.4 [ 0.372055] IO window: c000-cfff [ 0.372094] MEM window: 0xe7000000-0xe8ffffff [ 0.372134] PREFETCH window: 0x00000000e9200000-0x00000000e92fffff [ 0.372178] PCI: Bridge: 0000:00:1e.0 [ 0.372216] IO window: d000-dfff [ 0.372255] MEM window: disabled. [ 0.372293] PREFETCH window: 0x00000000e9000000-0x00000000e90fffff [ 0.372344] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.372420] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.372434] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.372510] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.372524] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 0.372600] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 0.372624] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.372968] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 0.372985] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.373035] NET: Registered protocol family 2 [ 0.404550] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.404980] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.406176] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.406613] TCP: Hash tables configured (established 262144 bind 65536) [ 0.406655] TCP reno registered [ 0.418730] NET: Registered protocol family 1 [ 0.421665] msgmni has been set to 7903 [ 0.421665] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.421665] io scheduler noop registered [ 0.421690] io scheduler cfq registered (default) [ 0.421889] pci 0000:01:00.0: Boot video device [ 0.422566] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.422566] assign_interrupt_mode Found MSI capability [ 0.422566] Allocate Port Service[0000:00:01.0:pcie00] [ 0.422566] Allocate Port Service[0000:00:01.0:pcie03] [ 0.422566] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.422566] assign_interrupt_mode Found MSI capability [ 0.422566] Allocate Port Service[0000:00:1c.0:pcie00] [ 0.422566] Allocate Port Service[0000:00:1c.0:pcie02] [ 0.422566] Allocate Port Service[0000:00:1c.0:pcie03] [ 0.422566] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 0.422566] assign_interrupt_mode Found MSI capability [ 0.422566] Allocate Port Service[0000:00:1c.3:pcie00] [ 0.423587] Allocate Port Service[0000:00:1c.3:pcie02] [ 0.423587] Allocate Port Service[0000:00:1c.3:pcie03] [ 0.423587] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 0.423587] assign_interrupt_mode Found MSI capability [ 0.423651] Allocate Port Service[0000:00:1c.4:pcie00] [ 0.423651] Allocate Port Service[0000:00:1c.4:pcie02] [ 0.423651] Allocate Port Service[0000:00:1c.4:pcie03] [ 0.424533] ACPI: ACPI0007:00 is registered as cooling_device0 [ 0.424533] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.424533] ACPI: SSDT CFEE8300, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311) [ 0.425505] ACPI: ACPI0007:01 is registered as cooling_device1 [ 0.425551] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.425830] ACPI: SSDT CFEE8390, 0087 (r1 PmRef Cpu2Ist 3000 INTL 20040311) [ 0.425830] ACPI: ACPI0007:02 is registered as cooling_device2 [ 0.425830] ACPI: Processor [CPU2] (supports 8 throttling states) [ 0.426445] ACPI: SSDT CFEE8420, 0087 (r1 PmRef Cpu3Ist 3000 INTL 20040311) [ 0.426821] ACPI: ACPI0007:03 is registered as cooling_device3 [ 0.426821] ACPI: Processor [CPU3] (supports 8 throttling states) [ 0.434126] hpet_resources: 0xfed00000 is busy [ 0.434126] Linux agpgart interface v0.103 [ 0.434126] Driver 'sd' needs updating - please use bus_type methods [ 0.434126] ahci 0000:00:1f.2: version 3.0 [ 0.434134] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 0.512666] Switched to high resolution mode on CPU 2 [ 0.512664] Switched to high resolution mode on CPU 1 [ 0.512780] Switched to high resolution mode on CPU 3 [ 0.513673] Switched to high resolution mode on CPU 0 [ 1.430429] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.430429] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part [ 1.430429] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 1.430786] scsi0 : ahci [ 1.430786] scsi1 : ahci [ 1.430786] scsi2 : ahci [ 1.431786] scsi3 : ahci [ 1.431786] scsi4 : ahci [ 1.431865] scsi5 : ahci [ 1.431865] ata1: SATA max UDMA/133 abar m2048@0xe9106000 port 0xe9106100 irq 379 [ 1.431865] ata2: SATA max UDMA/133 abar m2048@0xe9106000 port 0xe9106180 irq 379 [ 1.431865] ata3: SATA max UDMA/133 abar m2048@0xe9106000 port 0xe9106200 irq 379 [ 1.431865] ata4: SATA max UDMA/133 abar m2048@0xe9106000 port 0xe9106280 irq 379 [ 1.431865] ata5: SATA max UDMA/133 abar m2048@0xe9106000 port 0xe9106300 irq 379 [ 1.431865] ata6: SATA max UDMA/133 abar m2048@0xe9106000 port 0xe9106380 irq 379 [ 2.302883] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.304131] ata1.00: ATA-6: ST3500320NS, SN04, max UDMA/133 [ 2.304131] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.304131] ata1.00: configured for UDMA/133 [ 2.609882] ata2: SATA link down (SStatus 0 SControl 300) [ 3.214497] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.396769] ata3.00: ATA-7: ST3320620NS, 3.AEG, max UDMA/133 [ 3.396769] ata3.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.396769] ata3.00: configured for UDMA/133 [ 3.853972] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.853937] ata4.00: ATAPI: TSSTcorpCD/DVDW SH-S183A, SB02, max UDMA/33, ATAPI AN [ 3.853937] ata4.00: applying bridge limits [ 3.853937] ata4.00: configured for UDMA/33 [ 4.486049] ata5: SATA link down (SStatus 0 SControl 300) [ 4.998910] ata6: SATA link down (SStatus 0 SControl 300) [ 4.998898] scsi 0:0:0:0: Direct-Access ATA ST3500320NS SN04 PQ: 0 ANSI: 5 [ 4.999633] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 4.999686] sd 0:0:0:0: [sda] Write Protect is off [ 4.999725] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.999746] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.999840] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 4.999892] sd 0:0:0:0: [sda] Write Protect is off [ 4.999931] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.999952] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.000005] sda: sda1 sda2 sda3 [ 5.042442] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.042442] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.042442] scsi 2:0:0:0: Direct-Access ATA ST3320620NS 3.AE PQ: 0 ANSI: 5 [ 5.044339] sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) [ 5.044339] sd 2:0:0:0: [sdb] Write Protect is off [ 5.044339] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.044339] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.044339] sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) [ 5.044339] sd 2:0:0:0: [sdb] Write Protect is off [ 5.044339] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.044339] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.044339] sdb: sdb1 [ 5.065029] sd 2:0:0:0: [sdb] Attached SCSI disk [ 5.065029] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 5.065029] scsi 3:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183A SB02 PQ: 0 ANSI: 5 [ 5.067014] scsi 3:0:0:0: Attached scsi generic sg2 type 5 [ 5.067014] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 5.067014] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 5.067014] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.067014] mice: PS/2 mouse device common for all mice [ 5.067014] device-mapper: uevent: version 1.0.3 [ 5.067014] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 5.067014] cpuidle: using governor ladder [ 5.067014] cpuidle: using governor menu [ 5.067014] TCP cubic registered [ 5.067014] NET: Registered protocol family 17 [ 5.113792] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 5.221030] kjournald starting. Commit interval 5 seconds [ 5.226270] EXT3-fs: mounted filesystem with journal data mode. [ 5.226270] VFS: Mounted root (ext3 filesystem) readonly. [ 5.226270] Freeing unused kernel memory: 252k freed [ 6.712434] kjournald starting. Commit interval 5 seconds [ 6.712434] EXT3 FS on sdb1, internal journal [ 6.714465] EXT3-fs: mounted filesystem with ordered data mode. [ 7.282829] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded [ 7.282829] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 7.282829] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 7.282829] eth0: RTL8168b/8111b at 0xffffc2000002a000, 00:1d:7d:02:be:26, XID 38000000 IRQ 378 [ 7.313359] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 7.313359] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0460) [ 7.313359] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 7.415394] usbcore: registered new interface driver usbfs [ 7.415394] usbcore: registered new interface driver hub [ 7.415394] usbcore: registered new device driver usb [ 7.613978] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 [ 7.613978] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 7.613978] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 7.613987] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 7.617988] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 7.617988] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe9105000 [ 7.627693] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 7.627822] usb usb1: configuration #1 chosen from 1 choice [ 7.627897] hub 1-0:1.0: USB hub found [ 7.627940] hub 1-0:1.0: 6 ports detected [ 7.754361] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.754413] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.754484] usb usb1: Product: EHCI Host Controller [ 7.754523] usb usb1: Manufacturer: Linux 2.6.26 ehci_hcd [ 7.754562] usb usb1: SerialNumber: 0000:00:1a.7 [ 7.754630] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 7.754714] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 7.754717] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 7.754775] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 7.758854] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 7.758863] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe9104000 [ 7.764350] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 7.769343] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 7.769444] usb usb2: configuration #1 chosen from 1 choice [ 7.769505] hub 2-0:1.0: USB hub found [ 7.769547] hub 2-0:1.0: 6 ports detected [ 7.831163] USB Universal Host Controller Interface driver v3.0 [ 7.831856] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 7.831856] rtc0: alarms up to one month [ 7.873847] Driver 'sr' needs updating - please use bus_type methods [ 7.880768] sr0: scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray [ 7.880825] Uniform CD-ROM driver Revision: 3.20 [ 7.880948] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 7.887374] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.887430] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.887479] usb usb2: Product: EHCI Host Controller [ 7.887518] usb usb2: Manufacturer: Linux 2.6.26 ehci_hcd [ 7.887557] usb usb2: SerialNumber: 0000:00:1d.7 [ 7.888277] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 7.888277] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 7.888277] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 7.888277] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 7.888277] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100 [ 7.888277] usb usb3: configuration #1 chosen from 1 choice [ 7.888277] hub 3-0:1.0: USB hub found [ 7.888329] hub 3-0:1.0: 2 ports detected [ 8.051539] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.051592] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.052589] usb usb3: Product: UHCI Host Controller [ 8.052589] usb usb3: Manufacturer: Linux 2.6.26 uhci_hcd [ 8.052589] usb usb3: SerialNumber: 0000:00:1a.0 [ 8.052589] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 8.052589] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 8.052589] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 8.052589] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 8.052589] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e500 [ 8.052589] usb usb4: configuration #1 chosen from 1 choice [ 8.052589] hub 4-0:1.0: USB hub found [ 8.052589] hub 4-0:1.0: 2 ports detected [ 8.223550] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.223599] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.223655] usb usb4: Product: UHCI Host Controller [ 8.223704] usb usb4: Manufacturer: Linux 2.6.26 uhci_hcd [ 8.223743] usb usb4: SerialNumber: 0000:00:1a.1 [ 8.224462] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 8.224462] PCI: Setting latency timer of device 0000:00:1a.2 to 64 [ 8.224462] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 8.224462] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 8.224462] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000 [ 8.224462] usb usb5: configuration #1 chosen from 1 choice [ 8.224462] hub 5-0:1.0: USB hub found [ 8.224462] hub 5-0:1.0: 2 ports detected [ 8.309948] nvidia: module license 'NVIDIA' taints kernel. [ 8.345826] usb 1-5: new high speed USB device using ehci_hcd and address 3 [ 8.353919] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.353965] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.354014] usb usb5: Product: UHCI Host Controller [ 8.354053] usb usb5: Manufacturer: Linux 2.6.26 uhci_hcd [ 8.354092] usb usb5: SerialNumber: 0000:00:1a.2 [ 8.354823] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 8.354823] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 8.354823] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 8.354823] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 8.354823] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e200 [ 8.354823] usb usb6: configuration #1 chosen from 1 choice [ 8.354823] hub 6-0:1.0: USB hub found [ 8.354823] hub 6-0:1.0: 2 ports detected [ 8.399789] Linux video capture interface: v2.00 [ 8.455640] bttv: driver version 0.9.17 loaded [ 8.455640] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 8.466345] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.466637] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.466686] usb usb6: Product: UHCI Host Controller [ 8.466725] usb usb6: Manufacturer: Linux 2.6.26 uhci_hcd [ 8.466765] usb usb6: SerialNumber: 0000:00:1d.0 [ 8.467236] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 8.467317] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 8.467320] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 8.467341] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 8.467341] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e300 [ 8.467341] usb usb7: configuration #1 chosen from 1 choice [ 8.467341] hub 7-0:1.0: USB hub found [ 8.467341] hub 7-0:1.0: 2 ports detected [ 8.472644] usb 1-5: configuration #1 chosen from 1 choice [ 8.473240] hub 1-5:1.0: USB hub found [ 8.473240] hub 1-5:1.0: 4 ports detected [ 8.568776] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.569186] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.569201] usb usb7: Product: UHCI Host Controller [ 8.569201] usb usb7: Manufacturer: Linux 2.6.26 uhci_hcd [ 8.569201] usb usb7: SerialNumber: 0000:00:1d.1 [ 8.569201] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 8.569250] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 8.569253] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 8.569312] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 8.569382] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400 [ 8.569482] usb usb8: configuration #1 chosen from 1 choice [ 8.569544] hub 8-0:1.0: USB hub found [ 8.569561] hub 8-0:1.0: 2 ports detected [ 8.581299] usb 1-5: New USB device found, idVendor=0409, idProduct=005a [ 8.581342] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 8.695475] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.695525] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.695581] usb usb8: Product: UHCI Host Controller [ 8.695619] usb usb8: Manufacturer: Linux 2.6.26 uhci_hcd [ 8.695655] usb usb8: SerialNumber: 0000:00:1d.2 [ 8.695789] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 8.695789] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 8.736272] bttv: Bt8xx card found (0). [ 8.738440] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 8.738440] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 8.736272] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 8.736272] bttv0: Bt878 (rev 17) at 0000:05:02.0, irq: 18, latency: 32, mmio: 0xe9000000 [ 8.736272] bttv0: using: Prolink Pixelview PV-BT878P+ (Rev.4C,8E) [card=70,insmod option] [ 8.736272] bttv0: gpio: en=00000000, out=00000000 in=00ffc0ff [init] [ 8.736272] bttv0: tuner type=25 [ 8.736272] bttv0: i2c: checking for MSP34xx @ 0x80... not found [ 8.738440] bttv0: i2c: checking for TDA9875 @ 0xb0... not found [ 8.740601] bttv0: i2c: checking for TDA7432 @ 0x8a... not found [ 8.743245] IT8718 SuperIO detected. [ 8.774407] tuner' 0-0061: chip found @ 0xc2 (bt878 #0 [sw]) [ 8.774734] tuner-simple 0-0061: creating new instance [ 8.774780] tuner-simple 0-0061: type set to 25 (LG PAL_I+FM (TAPC-I001D)) [ 8.784688] bttv0: registered device video0 [ 8.784688] bttv0: registered device vbi0 [ 8.784688] bttv0: PLL: 28636363 => 35468950 .. ok [ 8.807458] input: bttv IR (card=70) as /devices/pci0000:00/0000:00:1e.0/0000:05:02.0/input/input1 [ 8.823454] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.09 Wed Jun 4 23:40:50 PDT 2008 [ 8.827455] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 8.827455] parport0: PC-style at 0xd200 [PCSPP,TRISTATE,EPP] [ 8.909067] 0000:05:00.0: ttyS0 at I/O 0xd000 (irq = 20) is a 16550A [ 8.909951] 0000:05:00.0: ttyS1 at I/O 0xd100 (irq = 20) is a 16550A [ 9.050258] usb 2-2: new high speed USB device using ehci_hcd and address 2 [ 9.233842] usb 2-2: configuration #1 chosen from 1 choice [ 9.234796] usb 2-2: New USB device found, idVendor=058f, idProduct=6362 [ 9.234796] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.234796] usb 2-2: Product: Mass Storage Device [ 9.234796] usb 2-2: Manufacturer: Generic [ 9.234796] usb 2-2: SerialNumber: 058F312D81B [ 9.263216] Initializing USB Mass Storage driver... [ 9.448117] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 9.747570] usb 3-1: configuration #1 chosen from 1 choice [ 9.874064] usb 3-1: New USB device found, idVendor=04bf, idProduct=0319 [ 9.874064] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.874064] usb 3-1: Product: TDK Bluetooth USB Adapter [ 9.874107] usb 3-1: Manufacturer: TDK [ 9.955054] Bluetooth: Core ver 2.11 [ 9.956243] NET: Registered protocol family 31 [ 9.956285] Bluetooth: HCI device and connection manager initialized [ 9.956329] Bluetooth: HCI socket layer initialized [ 9.992884] Bluetooth: HCI USB driver ver 2.9 [ 10.221888] usb 5-2: new low speed USB device using uhci_hcd and address 2 [ 10.609757] usb 5-2: configuration #1 chosen from 1 choice [ 10.653054] usb 5-2: New USB device found, idVendor=05fe, idProduct=0011 [ 10.653054] usb 5-2: New USB device strings: Mfr=2, Product=2, SerialNumber=0 [ 10.653054] usb 5-2: Product: Wireless Mouse [ 10.653061] usb 5-2: Manufacturer: Wireless Mouse [ 11.033636] usb 1-5.4: new high speed USB device using ehci_hcd and address 5 [ 11.143220] usb 1-5.4: configuration #1 chosen from 1 choice [ 11.143220] hub 1-5.4:1.0: USB hub found [ 11.143220] hub 1-5.4:1.0: 4 ports detected [ 11.274568] usb 1-5.4: New USB device found, idVendor=0409, idProduct=005a [ 11.274623] usb 1-5.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 11.275540] scsi6 : SCSI emulation for USB Mass Storage devices [ 11.275540] usb-storage: device found at 2 [ 11.275540] usb-storage: waiting for device to settle before scanning [ 11.486787] usb 1-5.4.1: new high speed USB device using ehci_hcd and address 6 [ 11.641986] usb 1-5.4.1: configuration #1 chosen from 1 choice [ 11.641986] usb 1-5.4.1: New USB device found, idVendor=1516, idProduct=1603 [ 11.641986] usb 1-5.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 11.641986] usb 1-5.4.1: Product: Mandriva Flash [ 11.641986] usb 1-5.4.1: Manufacturer: SKY [ 11.641986] usb 1-5.4.1: SerialNumber: 89900000000000006CB04CBD [ 11.645087] scsi7 : SCSI emulation for USB Mass Storage devices [ 11.646065] usb-storage: device found at 6 [ 11.646065] usb-storage: waiting for device to settle before scanning [ 11.646065] usbcore: registered new interface driver hci_usb [ 11.646122] usbcore: registered new interface driver usb-storage [ 11.646122] USB Mass Storage support registered. [ 11.647065] usbcore: registered new interface driver hiddev [ 11.661856] input: Wireless Mouse Wireless Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input2 [ 11.681969] input,hidraw0: USB HID v1.10 Mouse [Wireless Mouse Wireless Mouse] on usb-0000:00:1a.2-2 [ 11.682157] usbcore: registered new interface driver usbhid [ 11.682198] usbhid: v2.6:USB HID core driver [ 17.121248] usb-storage: device scan complete [ 17.122257] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 17.122928] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 17.123271] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 17.123906] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 17.126055] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 17.126766] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 17.128787] sd 6:0:0:1: [sdd] Attached SCSI removable disk [ 17.129070] sd 6:0:0:1: Attached scsi generic sg4 type 0 [ 17.134670] sd 6:0:0:2: [sde] Attached SCSI removable disk [ 17.134753] sd 6:0:0:2: Attached scsi generic sg5 type 0 [ 17.137950] sd 6:0:0:3: [sdf] Attached SCSI removable disk [ 17.137950] sd 6:0:0:3: Attached scsi generic sg6 type 0 [ 17.411559] usb-storage: device scan complete [ 17.412081] scsi 7:0:0:0: Direct-Access SKY Mandriva Flash 1.00 PQ: 0 ANSI: 2 [ 17.413764] sd 7:0:0:0: [sdg] 8069120 512-byte hardware sectors (4131 MB) [ 17.414122] sd 7:0:0:0: [sdg] Write Protect is off [ 17.414164] sd 7:0:0:0: [sdg] Mode Sense: 23 00 00 00 [ 17.414164] sd 7:0:0:0: [sdg] Assuming drive cache: write through [ 17.454544] sd 7:0:0:0: [sdg] 8069120 512-byte hardware sectors (4131 MB) [ 17.454683] sd 7:0:0:0: [sdg] Write Protect is off [ 17.454730] sd 7:0:0:0: [sdg] Mode Sense: 23 00 00 00 [ 17.454732] sd 7:0:0:0: [sdg] Assuming drive cache: write through [ 17.454774] sdg: sdg1 [ 17.456858] sd 7:0:0:0: [sdg] Attached SCSI removable disk [ 17.457522] sd 7:0:0:0: Attached scsi generic sg7 type 0 [ 17.571852] EXT3 FS on sda1, internal journal [ 17.799977] it87: Found IT8718F chip at 0x290, revision 5 [ 17.799977] it87: in3 is VCC (+5V) [ 18.014721] kjournald starting. Commit interval 5 seconds [ 18.014721] EXT3 FS on sda3, internal journal [ 18.014721] EXT3-fs: mounted filesystem with journal data mode.