Mirage	just listen
	Mirage	if you have a router and you plan on using more than one computer. put the modem bridged ethernet and the router to PPPOE
	Mirage	then put the connection details like your user and password on the router
	Mirage	if you set the modem to bridged ethernet make sure you turn off the DHCP server FIRST
	Mirage	then put it over in bridged ethernet
	GENinja	i only have one comp that needs to use and then my psp
	*	zboon/#noobzOT said:  GENinja, if your going to use a Linksys router then tell your SBC DSL modem to send PPP to the PC, if your not going to use the Linksys router then have the DSL model keep the PPP
	Mirage	ok so you need a router because you cant hardwire the PSP
	Mirage	so you use the router option like i explained above
	Mirage	the other way of setting it up is this
	Mirage	leave the modem PPPOE like it is already doing
	Mirage	then set the router up statically to an available address by the modem
	Mirage	for example
	*	zboon/#noobzOT said:  GENinja, are you really a network administrator? :P
	Mirage	if your modem has the IP 192.168.1.254 and is giving out IPs from 192.168.1.1 to 192.168.1.253
	Mirage	you could set the router on any address in that range
	Mirage	lets say you picked
	Mirage	192.168.1.200 for the routers static IP
	Mirage	you could then go into the modem and enable DMZ for 192.168.1.200
	Mirage	and if you did the set static/DMZ option with the router
	*	zboon/#noobzOT said:  GENinja, heres basically what you have to do...
	Mirage	your Gateway address would be the modem IP
	Mirage	DNS Primary would be the modem IP
	Mirage	subnet mask is 255.255.255.0
	Mirage	I would do secondary DNS from cisco's servers at 4.2.2.2
	Mirage	if any of this doesnt make sense, reread it until it does
	Mirage	and if its still over your head
	Mirage	print it out
	Mirage	and find someone to help you out with it