!!################################ !!ALSA Information Script v 0.4.41 !!################################ !!Script ran on: Sat Aug 16 23:25:42 CDT 2008 !!Linux Distribution !!------------------ Fedora release 8 (Werewolf) Fedora release 8 (Werewolf) Fedora release 8 (Werewolf) Fedora release 8 (Werewolf) !!Kernel Information !!------------------ Kernel release: 2.6.25.14-69.fc8 Operating System: GNU/Linux Architecture: i686 Processor: athlon SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.16rc2 Library version: 1.0.16 Utilities version: 1.0.16 !!Loaded ALSA modules !!------------------- snd_hda_intel !!Soundcards recognised by ALSA !!----------------------------- 0 [NVidia ]: HDA-Intel - HDA NVidia HDA NVidia at 0xfe024000 irq 22 !!PCI Soundcards installed in the system !!-------------------------------------- 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2) !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 00:10.1 0403: 10de:026c (rev a2) Subsystem: 1043:81cb !!Modprobe options (Sound related) !!-------------------------------- snd-via82xx: index=0 snd-card-0: index=0 snd-hda-intel: index=0 !!Loaded sound module options !!-------------------------- !!Module: snd_hda_intel enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : 0 id : ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, index : 0,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 single_cmd : N !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: Analog Devices AD1986A Address: 0 Vendor Id: 0x11d41986 Subsystem Id: 0x104381b3 Revision Id: 0x100500 No Modem Function Group found Default PCM: rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 GPIO: io=0, o=1, i=0, unsolicited=0, wake=0 Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x60]: 44100 48000 bits [0x2]: 16 formats [0x5]: PCM AC3 Delay: 3 samples Connection: 2 0x01* 0x06 Node 0x03 [Audio Output] wcaps 0x44d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x1d 0x1d] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Processing caps: benign=1, ncoeff=70 Node 0x04 [Audio Output] wcaps 0x40d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x1d 0x1d] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Node 0x05 [Audio Output] wcaps 0x40d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x1d 0x1d] Converter: stream=0, channel=4 Power: setting=D0, actual=D0 Node 0x06 [Audio Input] wcaps 0x100511: Stereo Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000 bits [0x6]: 16 20 formats [0x1]: PCM Power: setting=D0, actual=D0 Connection: 1 0x12 Node 0x07 [Audio Mixer] wcaps 0x200101: Stereo Connection: 8 0x03 0x09 0x13 0x14 0x15 0x16 0x17 0x18 Node 0x08 [Audio Mixer] wcaps 0x200100: Mono Connection: 1 0x07 Node 0x09 [Audio Mixer] wcaps 0x20010e: Mono Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80] [0x80] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80] Connection: 2 0x04 0x05 Node 0x0a [Audio Selector] wcaps 0x300101: Stereo Connection: 3 0x07* 0x04 0x05 Node 0x0b [Audio Selector] wcaps 0x300101: Stereo Connection: 2 0x07* 0x04 Node 0x0c [Audio Selector] wcaps 0x300101: Stereo Connection: 2 0x04* 0x07 Node 0x0d [Audio Selector] wcaps 0x300101: Stereo Connection: 2 0x05* 0x08 Node 0x0e [Audio Selector] wcaps 0x300100: Mono Connection: 2 0x08* 0x11 Node 0x0f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 8 0x1f 0x20 0x1d 0x1d 0x27* 0x28 0x29 0x2a Node 0x10 [Audio Selector] wcaps 0x300101: Stereo Connection: 3 0x20 0x1c* 0x1f Node 0x11 [Audio Selector] wcaps 0x300941: Stereo R/L Connection: 2 0x0f* 0x2b Processing caps: benign=1, ncoeff=0 Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 8 0x11 0x22* 0x00 0x21 0x10 0x07 0x08 0x23 Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x11 Node 0x14 [Audio Selector] wcaps 0x30010c: Mono Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80] Connection: 1 0x23 Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x17 0x17] Connection: 1 0x22 Node 0x16 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x21 Node 0x17 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x10 Node 0x18 [Audio Selector] wcaps 0x30010c: Mono Amp-Out Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1 Amp-Out vals: [0x8f] Connection: 2 0x19* 0x24 Node 0x19 [Beep Generator Widget] wcaps 0x700000: Mono Node 0x1a [Pin Complex] wcaps 0x400185: Stereo Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x0e 0x0e] Pincap 0x081f: OUT HP Detect Trigger ImpSense Pin Default 0x02214021: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x2, Sequence = 0x1 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=00, enabled=0 Connection: 1 0x0a Node 0x1b [Pin Complex] wcaps 0x400185: Stereo Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x0e 0x0e] Pincap 0x081001f: OUT HP EAPD Detect Trigger ImpSense EAPD 0x2: EAPD Pin Default 0x01014011: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x1 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x0b Node 0x1c [Pin Complex] wcaps 0x400185: Stereo Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0837: IN OUT Detect Trigger ImpSense Pin Default 0x01013012: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x1, Sequence = 0x2 Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Connection: 1 0x0c Node 0x1d [Pin Complex] wcaps 0x400985: Stereo Amp-Out R/L Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x081737: IN OUT Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 Pin Default 0x01019015: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x1, Sequence = 0x5 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Connection: 1 0x0d Node 0x1e [Pin Complex] wcaps 0x400104: Mono Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x0e] Pincap 0x0810: OUT Pin Default 0x501700f0: [N/A] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x40: OUT Connection: 1 0x0e Node 0x1f [Pin Complex] wcaps 0x400081: Stereo Pincap 0x081727: IN Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 Pin Default 0x02a190f0: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Node 0x20 [Pin Complex] wcaps 0x400081: Stereo Pincap 0x081727: IN Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 Pin Default 0x018130f0: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Node 0x21 [Pin Complex] wcaps 0x400081: Stereo Pincap 0x0827: IN Detect Trigger ImpSense Pin Default 0x509700f0: [N/A] Aux at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Node 0x22 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x993310f0: [Fixed] CD at Int ATAPI Conn = ATAPI, Color = Black DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x20: IN Node 0x23 [Pin Complex] wcaps 0x400000: Mono Pincap 0x0820: IN Pin Default 0x50b700f0: [N/A] Telephony at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x20: IN Node 0x24 [Pin Complex] wcaps 0x400000: Mono Pincap 0x0820: IN Pin Default 0x90f700f0: [Fixed] Other at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x20: IN Node 0x25 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x0810: OUT Pin Default 0x014510f0: [Jack] SPDIF Out at Ext Rear Conn = Optical, Color = Black DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x40: OUT Connection: 1 0x02 Node 0x26 [Power Widget] wcaps 0x500500: Mono Power: setting=D0, actual=D0 Connection: 8 0x07* 0x08 0x13 0x14 0x15 0x16 0x17 0x18 Node 0x27 [Audio Mixer] wcaps 0x200101: Stereo Connection: 2 0x1f 0x1d Node 0x28 [Audio Mixer] wcaps 0x200101: Stereo Connection: 2 0x1f 0x20 Node 0x29 [Audio Mixer] wcaps 0x200101: Stereo Connection: 2 0x1d 0x20 Node 0x2a [Audio Mixer] wcaps 0x200101: Stereo Connection: 3 0x1f 0x1d 0x20 Node 0x2b [Audio Mixer] wcaps 0x200100: Mono Connection: 1 0x0f --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root root 116, 8 2008-08-16 23:23 /dev/snd/controlC0 crw-rw---- 1 root root 116, 7 2008-08-16 23:23 /dev/snd/hwC0D0 crw-rw---- 1 root root 116, 6 2008-08-16 23:23 /dev/snd/pcmC0D0c crw-rw---- 1 root root 116, 5 2008-08-16 23:23 /dev/snd/pcmC0D0p crw-rw---- 1 root root 116, 4 2008-08-16 23:23 /dev/snd/pcmC0D1p crw-rw---- 1 root root 116, 3 2008-08-16 23:23 /dev/snd/seq crw-rw---- 1 root root 116, 2 2008-08-16 23:23 /dev/snd/timer !!ALSA configuration files !!------------------------ !!User specific config file (~/.asoundrc) # Override the default output used by ALSA. # If you do not override the default, your default # device is identical to the (unmixed) analog device # shown below. If you prefer mixed and/or digital # output, uncomment the appropriate four lines below # (only one slave.pcm line). #pcm.!default { # type plug ## Uncomment the following to use mixed analog by default # slave.pcm "dmix-analog" ## Uncomment the following to use unmixed digital by default # slave.pcm "digital-hw" ## Uncomment the following to use mixed digital by default # slave.pcm "dmix-digital" #} # Alias for analog output on the nForce2/4 (hw:0,0) # - This is identical to the device named "default"--which # always exists and refers to hw:0,0 (unless overridden) # - Therefore, we can specify "hw:0,0", "default", or "analog" # to access analog output on the nForce2/4 pcm.analog { type plug slave.pcm "analog-hw" } # Control device (mixer, etc.) for the nForce2 card ctl.analog { type hw card 0 } # Alias for (rate-converted) mixed analog output on the # nForce2 (hw:0,0) # - This will accept audio input--regardless of rate--and # convert to the rate required for the dmix plugin # (in this case 48000Hz) pcm.mixed-analog { type plug slave.pcm "dmix-analog" } # Control device (mixer, etc.) for the nForce2 card ctl.mixed-analog { type hw card 0 } # Alias for (rate-converted) digital (S/PDIF) output on the # nForce2 (hw:0,2) # - This will accept audio input--regardless of rate--and # convert to the rate required for the S/PDIF hardware # (in this case 48000Hz) pcm.digital { type plug slave.pcm "digital-hw" } # Control device (mixer, etc.) for the nForce2 card ctl.digital { type hw card 0 } # Alias for mixed (rate-converted) digital (S/PDIF) output on the # nForce2/4 (hw:0,2) # - This will accept audio input--regardless of rate--and # convert to the rate required for the S/PDIF hardware # (in this case 48000Hz) pcm.mixed-digital { type plug slave.pcm "dmix-digital" } # Control device (mixer, etc.) for the nForce2 card ctl.mixed-digital { type hw card 0 } # The following devices are not useful by themselves. They # require specific rates, channels, and formats. Therefore, # you probably do not want to use them directly. Instead use # of of the devices defined above. # Alias for analog output on the nForce2 (hw:0,0) # Do not use this directly--it requires specific rate, # channels, and format pcm.analog-hw { type hw card 0 # The default value for device is 0, so no need to specify } # Control device (mixer, etc.) for the nForce2/4 card ctl.analog-hw { type hw card 0 } # Alias for digital (S/PDIF) output on the nForce2/4 (hw:0,2) # Do not use this directly--it requires specific rate, # channels, and format pcm.digital-hw { type hw card 0 device 2 } # Control device (mixer, etc.) for the nForce2/4 card ctl.digital-hw { type hw card 0 } # Direct software mixing plugin for analog output on # the nForce2/4 (hw:0,0) # Do not use this directly--it requires specific rate, # channels, and format pcm.dmix-analog { type dmix ipc_key 1234 slave { pcm "analog-hw" period_time 0 period_size 1024 buffer_size 4096 rate 48000 } } # Control device (mixer, etc.) for the nForce2/4 card ctl.dmix-analog { type hw card 0 } # Direct software mixing plugin for digital (S/PDIF) output # on the nForce2/4 (hw:0,2) # Do not use this directly--it requires specific rate, # channels, and format pcm.dmix-digital { type dmix ipc_key 1235 slave { pcm "digital-hw" period_time 0 period_size 1024 buffer_size 4096 rate 48000 } } # Control device (mixer, etc.) for the nForce2/4 card ctl.dmix-digital { type hw card 0 } !!System wide config file (/etc/asound.conf) # Generated by system-config-soundcard, do not edit by hand defaults.pcm.card 0 defaults.pcm.card 0 !!Aplay/Arecord output !!------------ APLAY ARECORD !!Amixer output !!------------- !!-------Mixer controls for card 0 [NVidia] Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!Alsactl output !!------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ Module rfcomm l2cap bluetooth autofs4 sunrpc ipv6 cpufreq_ondemand powernow_k8 lirc_serial lirc_dev snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_hwdep forcedeth snd nvidia k8temp parport_pc pcspkr i2c_nforce2 soundcore sr_mod sg button hwmon sata_nv parport cdrom floppy i2c_core dm_snapshot dm_zero dm_mirror dm_mod pata_acpi pata_amd ata_generic libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd