Linux version 2.6.25.11-0.1-default (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP Wed Aug 20 13:33:17 CEST 2008 Command line: root=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2200_NY08T6C2999F-part7 resume=/dev/sda5 splash=silent vga=0x317 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe70000 (usable) BIOS-e820: 000000007fe70000 - 000000007ff00000 (ACPI NVS) BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 523888) 1 entries of 3200 used end_pfn_map = 1048576 DMI present. ACPI: RSDP 000F6960, 0024 (r2 TOSINV) ACPI: XSDT 7FE78718, 008C (r1 TOSINV TOSINV00 6040000 INV 0) ACPI: FACP 7FE81BF8, 00F4 (r3 TOSINV TOSINV00 6040000 ALAN 1) ACPI: DSDT 7FE7A4B1, 76D3 (r2 TOSINV CALISTGA 6040000 INTL 20050624) ACPI: FACS 7FE82FC0, 0040 ACPI: APIC 7FE81CEC, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A) ACPI: HPET 7FE81D54, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A) ACPI: MCFG 7FE81D8C, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A) ACPI: TCPA 7FE81DC8, 0032 (r1 PTLTD CALISTGA 6040000 PTL 1) ACPI: APIC 7FE81DFA, 0068 (r1 TOSINV APIC 6040000 INV 0) ACPI: SLIC 7FE81E62, 0176 (r1 TOSINV TOSINV00 6040000 INV 0) ACPI: BOOT 7FE81FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: SSDT 7FE79E62, 064F (r1 SataRe SataPri 1000 INTL 20050624) ACPI: SSDT 7FE797D0, 0692 (r1 SataRe SataSec 1000 INTL 20050624) ACPI: SSDT 7FE78D30, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) ACPI: SSDT 7FE78C8A, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624) ACPI: SSDT 7FE787A4, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: DMI detected: Toshiba No NUMA configuration found Faking a node at 0000000000000000-000000007fe70000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 523888) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-000000007fe70000 NODE_DATA [000000000000c000 - 0000000000013fff] bootmap [0000000000014000 - 0000000000023fcf] pages 10 early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] SMP_TRAMPOLINE early res: 2 [200000-8b7bd7] TEXT DATA BSS early res: 3 [37a77000-37fef8bd] RAMDISK early res: 4 [9f800-a07ff] EBDA early res: 5 [8000-bfff] PGTABLE [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0 [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0 [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0 [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0 [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0 [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0 [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0 [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0 [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0 [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 523888 On node 0 totalpages: 523791 DMA zone: 56 pages used for memmap DMA zone: 1729 pages reserved DMA zone: 2214 pages, LIFO batch:0 DMA32 zone: 7106 pages used for memmap DMA32 zone: 512686 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 47936 bytes of per cpu data Built 1 zonelists in Node order, mobility grouping on. Total pages: 514900 Policy zone: DMA32 Kernel command line: root=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2200_NY08T6C2999F-part7 resume=/dev/sda5 splash=silent vga=0x317 bootsplash: silent mode. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER time.c: Detected 1995.001 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 2053676k/2095552k available (2366k kernel code, 41488k reserved, 1928k data, 404k init) CPA: page pool initialized 1 of 1 pages preallocated hpet clockevent registered Calibrating delay using timer specific routine.. 3994.76 BogoMIPS (lpj=7989529) Security Framework initialized AppArmor: AppArmor initialized AppArmor: Registered secondary security module capability Capability LSM initialized as secondary Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring handled by SMI using mwait in idle threads. ACPI: Core revision 20070126 ACPI: Checking initramfs for custom DSDT Parsing all Control Methods: Table [DSDT](id 0001) - 1014 Objects with 96 Devices 281 Methods 28 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 10 Objects with 3 Devices 4 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0003) - 10 Objects with 3 Devices 4 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0004) - 7 Objects with 0 Devices 3 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0005) - 4 Objects with 0 Devices 3 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0006) - 13 Objects with 0 Devices 4 Methods 0 Regions tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful Using local APIC timer interrupts. APIC timer calibration result 10390638 Detected 10.390 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 3990.05 BogoMIPS (lpj=7980105) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs CPU0 attaching sched-domain: domain 0: span 00000000,00000000,00000000,00000003 groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 domain 1: span 00000000,00000000,00000000,00000003 groups: 00000000,00000000,00000000,00000003 CPU1 attaching sched-domain: domain 0: span 00000000,00000000,00000000,00000003 groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 domain 1: span 00000000,00000000,00000000,00000003 groups: 00000000,00000000,00000000,00000003 net_namespace: 1016 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 6 Wake, Enabled 5 Runtime GPEs in this block ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:............................................................................ Initialized 25/28 Regions 0/0 Fields 32/33 Buffers 19/26 Packages (1067 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:<5>ACPI: BIOS _OSI(Linux) query ignored via DMI .. Executed 2 _INI methods requiring 0 _STA executions (examined 108 objects) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: Power Resource [FN00] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz AppArmor: AppArmor Filesystem Enabled ACPI: RTC can wake from S4 Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 system 00:01: iomem range 0xe0000000-0xefffffff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved system 00:06: ioport range 0x3e8-0x3ef has been reserved system 00:06: ioport range 0x400-0x401 has been reserved system 00:06: ioport range 0x680-0x69f has been reserved system 00:06: ioport range 0x800-0x80f has been reserved system 00:06: ioport range 0x1000-0x107f has been reserved system 00:06: ioport range 0x1180-0x11bf has been reserved system 00:06: ioport range 0x1640-0x164f has been reserved system 00:06: ioport range 0xfe00-0xfe01 has been reserved PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0 PCI: Bridge: 0000:00:01.0 IO window: 2000-2fff MEM window: 0xcd000000-0xceffffff PREFETCH window: 0x00000000d0000000-0x00000000dfffffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: 3000-3fff MEM window: 0xf0700000-0xf07fffff PREFETCH window: 0x00000000f0200000-0x00000000f03fffff PCI: Bridge: 0000:00:1c.2 IO window: 4000-4fff MEM window: 0xf0800000-0xf08fffff PREFETCH window: 0x00000000f0400000-0x00000000f05fffff PCI: Bus 8, cardbus bridge: 0000:07:06.0 IO window: 0x00005400-0x000054ff IO window: 0x00005800-0x000058ff PREFETCH window: 0x88000000-0x8bffffff MEM window: 0x8c000000-0x8fffffff PCI: Bridge: 0000:00:1e.0 IO window: 5000-5fff MEM window: 0xf0900000-0xf09fffff PREFETCH window: 0x0000000088000000-0x000000008bffffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 PCI: Enabling device 0000:07:06.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:07:06.0[A] -> GSI 18 (level, low) -> IRQ 18 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered Unpacking initramfs... done Freeing initrd memory: 5602k freed Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1219252810.017:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device pci 0000:07:08.0: Firmware left e100 interrupts enabled; disabling PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000900000, using 6144k, total 262144k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture... bootsplash: silentjpeg size 166113 bytes bootsplash: ...found (1024x768, 154167 bytes, v3). Console: switching to colour frame buffer device 124x44 fb0: VESA VGA frame buffer device hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input0 cpuidle: using governor ladder cpuidle: using governor menu NET: Registered protocol family 1 registered taskstats version 1 Freeing unused kernel memory: 404k freed Write protecting the kernel read-only data: 1688k input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 ACPI: SSDT 7FE794D6, 023D (r1 PmRef Cpu0Ist 3000 INTL 20050624) Parsing all Control Methods: Table [SSDT](id 00DE) - 6 Objects with 0 Devices 4 Methods 0 Regions ACPI: SSDT 7FE78F8F, 04C2 (r1 PmRef Cpu0Cst 3001 INTL 20050624) Parsing all Control Methods: Table [SSDT](id 00DF) - 1 Objects with 0 Devices 1 Methods 0 Regions Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7FE79713, 00BD (r1 PmRef Cpu1Ist 3000 INTL 20050624) Parsing all Control Methods: Table [SSDT](id 00E7) - 4 Objects with 0 Devices 4 Methods 0 Regions ACPI: SSDT 7FE79451, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) Parsing all Control Methods: Table [SSDT](id 00E8) - 1 Objects with 0 Devices 1 Methods 0 Regions ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:01 is registered as cooling_device1 Marking TSC unstable due to TSC halts in idle ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: LNXTHERM:01 is registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (44 C) ACPI: LNXTHERM:02 is registered as thermal_zone1 ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [ffff81007fb7ff10] 'on' ACPI: Thermal Zone [TZ01] (47 C) ACPI: ACPI Dock Station Driver SCSI subsystem initialized libata version 3.00 loaded. ata_piix 0000:00:1f.2: version 2.12 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15 ata1.00: ATA-7: FUJITSU MHV2200BT PL, 00000050, max UDMA/100 ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/100 Clocksource tsc unstable (delta = -377064256 ns) Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input2 ata2.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.10, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2200B 0000 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.10 PQ: 0 ANSI: 5 ACPI: Transitioning device [FAN0] to D3 ACPI: PNP0C0B:00 is registered as cooling_device2 ACPI: Fan [FAN0] (off) BIOS EDD facility v0.16 2004-Jun-25, 6 devices found usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA USB Universal Host Controller Interface driver v3.0 sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 <<6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.25.11-0.1-default uhci_hcd usb usb1: SerialNumber: 0000:00:1d.0 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 sda5<7>PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0c04000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected sda6 sda7<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.25.11-0.1-default ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 sda8 > ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 sd 0:0:0:0: [sda] Attached SCSI disk PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.25.11-0.1-default uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 usb usb4: configuration #1 chosen from 1 choice usb 2-3: new high speed USB device using ehci_hcd and address 2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 2-3: configuration #1 chosen from 1 choice usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb 2-3: New USB device found, idVendor=054c, idProduct=0243 usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-3: Product: Strorage Media usb 2-3: Manufacturer: Sony usb 2-3: SerialNumber: 1307071001482 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.25.11-0.1-default uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.25.11-0.1-default uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 PM: Starting manual resume from disk kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [ffff81007fb7ff10] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [ffff81007fb7ff10] 'on' intel_rng: FWH not detected ACPI: AC Adapter [ADP0] (on-line) ACPI: Battery Slot [BAT0] (battery present) iTCO_vendor_support: vendor-support=0 Driver 'sr' needs updating - please use bus_type methods Initializing USB Mass Storage driver... scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 ACPI: Lid Switch [LID] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ACPI: Power Button (CM) [PWRB] ACPI: device:04 is registered as cooling_device3 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input6 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k Yenta: CardBus bridge found at 0000:07:06.0 [1179:ff10] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) Yenta: Routing CardBus interrupts to PCI ACPI: device:0a is registered as cooling_device4 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/input/input7 Yenta TI: socket 0000:07:06.0, mfunc 0x01a01b22, devctl 0x66 e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Yenta: ISA IRQ mask 0x0cf8, PCI irq 18 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#07) from #07 to #0b pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff pcmcia: parent PCI bridge Memory window: 0xf0900000 - 0xf09fffff pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff ACPI: PCI Interrupt 0000:07:06.1[B] -> GSI 17 (level, low) -> IRQ 17 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f0906000-f09067ff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: PCI Interrupt 0000:07:08.0[A] -> GSI 20 (level, low) -> IRQ 20 iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23ks e100: eth0: e100_probe: addr 0xf0905000, irq 20, MAC addr 00:a0:d1:69:9e:28 sdhci: SDHCI controller found at 0000:07:06.3 [104c:803c] (rev 0) ACPI: PCI Interrupt 0000:07:06.3[A] -> GSI 18 (level, low) -> IRQ 18 mmc0: SDHCI at 0xf0906800 irq 18 DMA ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 ACPI: I/O resource 0000:00:1f.3 [0x18c0-0x18df] conflicts with ACPI region SMBI [0x18c0-0x18cf] ACPI: Device needs an ACPI driver ACPI: PCI Interrupt 0000:07:06.2[A] -> GSI 18 (level, low) -> IRQ 18 iwl3945: Copyright(c) 2003-2007 Intel Corporation ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:05:00.0 to 64 iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection scsi 2:0:0:0: Direct-Access Sony Storage media 0100 PQ: 0 ANSI: 0 CCS iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels phy0: Selected rate control algorithm 'iwl-3945-rs' sd 2:0:0:0: [sdb] 15858688 512-byte hardware sectors (8120 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] 15858688 512-byte hardware sectors (8120 MB) ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1b.0 to 64 sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 sd 2:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from BIOS... ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0x18, fmic=0x0, line=0x0, fline=0x0, cd=0x0, aux=0x0 sd 2:0:0:0: [sdb] Attached SCSI removable disk sd 2:0:0:0: Attached scsi generic sg2 type 0 usb-storage: device scan complete ACPI: PCI interrupt for device 0000:05:00.0 disabled Adding 9446180k swap on /dev/sda5. Priority:-1 extents:1 across:9446180k device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com pccard: PCMCIA card inserted into slot 0 cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xdc000-0xfffff cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff cs: memory probe 0x88000000-0x8bffffff: excluding 0x88000000-0x8bffffff cs: memory probe 0xa0000000-0xa0ffffff: clean. cs: memory probe 0xf0900000-0xf09fffff: excluding 0xf0900000-0xf090ffff pcmcia: registering new device pcmcia0.0 comedi: version 0.7.76 - David Schleef Available NI device IDs: pcmcia: request for exclusive IRQ could not be fulfilled. pcmcia: the driver needs updating to supported shared IRQ lines. loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. fuse init (API version 7.9) type=1505 audit(1219245624.347:2): operation="profile_load" name="/bin/ping" name2="default" pid=1714 type=1505 audit(1219245624.407:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1732 type=1505 audit(1219245624.475:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1736 type=1505 audit(1219245624.499:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1737 type=1505 audit(1219245624.535:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1738 type=1505 audit(1219245624.755:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1751 type=1505 audit(1219245624.795:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1778 type=1505 audit(1219245624.875:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1791 type=1505 audit(1219245624.963:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1807 type=1505 audit(1219245625.007:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1819 NET: Registered protocol family 10 lo: Disabled Privacy Extensions usb 2-3: USB disconnect, address 2 ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) IA-32 Microcode Update Driver: v1.14a ADDRCONF(NETDEV_UP): eth0: link is not ready ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PM: Writing back config space on device 0000:05:00.0 at offset 1 (was 100002, writing 100006) ADDRCONF(NETDEV_UP): wlan0: link is not ready NET: Registered protocol family 17 bootsplash: status on console 0 changed to on wlan0: Initial auth_alg=0 wlan0: authenticate with AP 00:15:af:26:70:e2 wlan0: RX authentication from 00:15:af:26:70:e2 (alg=0 transaction=2 status=0) wlan0: authenticated wlan0: associate with AP 00:15:af:26:70:e2 wlan0: RX AssocResp from 00:15:af:26:70:e2 (capab=0x421 status=0 aid=1) wlan0: associated wlan0: switched to short barker preamble (BSSID=00:15:af:26:70:e2) ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=0 wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0 wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30 wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15 wlan0: disassociate(reason=3) wlan0: no IPv6 routers present CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 00000000,00000000,00000000,00000003 groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 domain 1: span 00000000,00000000,00000000,00000003 groups: 00000000,00000000,00000000,00000003 CPU1 attaching sched-domain: domain 0: span 00000000,00000000,00000000,00000003 groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 domain 1: span 00000000,00000000,00000000,00000003 groups: 00000000,00000000,00000000,00000003 wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: deauthenticated wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6) wlan0: authenticate with AP 00:15:af:26:70:e2 wlan0: RX authentication from 00:15:af:26:70:e2 (alg=0 transaction=2 status=0) wlan0: authenticated wlan0: associate with AP 00:15:af:26:70:e2 wlan0: RX ReassocResp from 00:15:af:26:70:e2 (capab=0x421 status=0 aid=1) wlan0: associated wlan0: switched to short barker preamble (BSSID=00:15:af:26:70:e2) wlan0: disassociate(reason=3) iwl3945: Microcode SW error detected. Restarting 0x82000008. iwl3945: Error Reply type 0x00000005 cmd REPLY_TX (0x1C) seq 0x0007 ser 0x0000004B iwl3945: Can't stop Rx DMA. wlan0: Initial auth_alg=0 wlan0: authenticate with AP 00:15:af:26:70:e2 wlan0: RX authentication from 00:15:af:26:70:e2 (alg=0 transaction=2 status=0) wlan0: authenticated wlan0: associate with AP 00:15:af:26:70:e2 wlan0: Initial auth_alg=0 wlan0: authenticate with AP 00:15:af:26:70:e2 wlan0: RX authentication from 00:15:af:26:70:e2 (alg=0 transaction=2 status=0) wlan0: authenticated wlan0: associate with AP 00:15:af:26:70:e2 wlan0: RX ReassocResp from 00:15:af:26:70:e2 (capab=0x421 status=0 aid=1) wlan0: associated wlan0: switched to short barker preamble (BSSID=00:15:af:26:70:e2) wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=0 wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0 wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30 wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15 SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=486 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=466 SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=260 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=240 SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=486 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=466 SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=486 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=466 SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=414 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=394 SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=450 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=430 SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=0 wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0 wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30 wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15 SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=0 wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0 wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30 wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15 pccard: card ejected from slot 0 SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 pccard: PCMCIA card inserted into slot 0 pcmcia: registering new device pcmcia0.0 pcmcia: request for exclusive IRQ could not be fulfilled. pcmcia: the driver needs updating to supported shared IRQ lines. wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=0 wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0 wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30 wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15 wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=0 wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0 wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30 wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15 SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=0 wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0 wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30 wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15 wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=0 wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0 wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30 wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15 ACPI: PCI interrupt for device 0000:07:06.2 disabled wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=0 wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0 wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30 wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15 uhci_hcd 0000:00:1d.3: remove, state 4 usb usb5: USB disconnect, address 1 uhci_hcd 0000:00:1d.3: USB bus 5 deregistered ACPI: PCI interrupt for device 0000:00:1d.3 disabled uhci_hcd 0000:00:1d.2: remove, state 4 usb usb4: USB disconnect, address 1 uhci_hcd 0000:00:1d.2: USB bus 4 deregistered ACPI: PCI interrupt for device 0000:00:1d.2 disabled uhci_hcd 0000:00:1d.1: remove, state 4 usb usb3: USB disconnect, address 1 uhci_hcd 0000:00:1d.1: USB bus 3 deregistered ACPI: PCI interrupt for device 0000:00:1d.1 disabled uhci_hcd 0000:00:1d.0: remove, state 4 usb usb1: USB disconnect, address 1 uhci_hcd 0000:00:1d.0: USB bus 1 deregistered ACPI: PCI interrupt for device 0000:00:1d.0 disabled wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=0 wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0 wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30 wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15 ACPI: PCI interrupt for device 0000:07:06.3 disabled pccard: card ejected from slot 0 pccard: PCMCIA card inserted into slot 0 pcmcia: registering new device pcmcia0.0 pcmcia: request for exclusive IRQ could not be fulfilled. pcmcia: the driver needs updating to supported shared IRQ lines. pccard: card ejected from slot 0 pccard: PCMCIA card inserted into slot 0 pcmcia: registering new device pcmcia0.0 pcmcia: request for exclusive IRQ could not be fulfilled. pcmcia: the driver needs updating to supported shared IRQ lines. SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44