INIT detected from ---- {APICID = 00 NODEID = 00 COREID = 00} --- Issuing SOFT_RESET... coreboot-2.0.0_s2882_Fallback Wed Aug 20 15:59:25 EDT 2008 starting... 01 nodes initialized. SBLink=00 NC node|link=00 Ram1.00 Ram1.01 Ram2.00 Ram2.01 Ram3 Initializing memory: done Ram4 v_esp=000cffc4 testx = 5a5a5a5a Copying data from cache to RAM -- switching to use RAM as stack... Done testx = 5a5a5a5a Disabling cache as ram now Clearing initial memory region: Done Copying coreboot to RAM. src=fffe9000 dst=00004000 linxbios_ram.nrv2b length = 0000e4c8 linxbios_ram.bin length = 00028d5c Jumping to coreboot. coreboot-2.0.0_s2882_Fallback Wed Aug 20 15:59:25 EDT 2008 booting... Enumerating buses... APIC_CLUSTER: 0 enabled PCI_DOMAIN: 0000 enabled PCI: 00:18.3 siblings=1 CPU: APIC: 00 enabled CPU: APIC: 01 enabled PCI: pci_scan_bus for bus 00 PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] enabled PCI: 01:00.0 [1022/7450] enabled PCI: 01:01.0 [1022/7450] enabled next_unitid: 0003 PCI: 01:00.0 [1022/7460] enabled PCI: 01:03.0 [1022/7460] enabled next_unitid: 0007 PCI: pci_scan_bus for bus 01 PCI: 01:01.0 [1022/7450] enabled PCI: 01:01.1 [1022/7451] enabled PCI: 01:02.0 [1022/7450] enabled PCI: 01:02.1 [1022/7451] enabled PCI: 01:03.0 [1022/7460] enabled PCI: 01:04.0 [1022/7468] enabled PCI: 01:04.1 [1022/7469] enabled PCI: 01:04.2 [1022/746a] enabled PCI: 01:04.3 [1022/746b] enabled PCI: pci_scan_bus for bus 02 Disabling static device: PCI: 02:06.0 Disabling static device: PCI: 02:06.1 PCI: 02:09.0 [14e4/1648] enabled PCI: 02:09.1 [14e4/1648] enabled PCI: pci_scan_bus returning with max=002 PCI: 02: 100MHz PCI-X PCI: pci_scan_bus for bus 03 PCI: 03:03.0 [1095/3124] enabled PCI: pci_scan_bus returning with max=003 PCI: 03: Conventional PCI PCI: pci_scan_bus for bus 04 PCI: 04:00.0 [1022/7464] enabled PCI: 04:00.1 [1022/7464] enabled PCI: 04:05.0 [1095/3114] enabled PCI: 04:06.0 [1002/4752] enabled PCI: 04:08.0 [8086/1229] enabled PCI: pci_scan_bus returning with max=004 PNP: 002e.0 enabled PNP: 002e.1 disabled PNP: 002e.2 enabled PNP: 002e.3 disabled PNP: 002e.5 enabled PNP: 002e.6 disabled PNP: 002e.7 disabled PNP: 002e.8 disabled PNP: 002e.9 disabled PNP: 002e.a disabled PNP: 002e.b enabled PCI: pci_scan_bus returning with max=004 PCI: pci_scan_bus returning with max=004 done Allocating resources... Reading resources... PCI: 01:01.0 1c <- [0x00fffff000 - 0x00ffffefff] size 0x00000000 gran 0x0c bus 02 io PCI: 01:01.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] size 0x00000000 gran 0x14 bus 02 prefmem PCI: 01:02.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] size 0x00000000 gran 0x14 bus 03 prefmem PCI: 01:03.0 24 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus 04 prefmem Done reading resources. Allocating VGA resource PCI: 04:06.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 01:03.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000 Setting PCI_BRIDGE_CTL_VGA for bridge Root Device Setting resources... VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device PCI: 00:18.0 1b8 <- [0x00fd400000 - 0x00fd3fffff] size 0x00000000 gran 0x14 prefmem PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000003fff] size 0x00003000 gran 0x0c io PCI: 00:18.0 1b0 <- [0x00fc000000 - 0x00fd3fffff] size 0x01400000 gran 0x14 mem PCI: 01:01.0 20 <- [0x00fd100000 - 0x00fd1fffff] size 0x00100000 gran 0x14 bus 02 mem PCI: 02:09.0 10 <- [0x00fd100000 - 0x00fd10ffff] size 0x00010000 gran 0x10 mem64 PCI: 02:09.0 18 <- [0x00fd110000 - 0x00fd11ffff] size 0x00010000 gran 0x10 mem64 PCI: 02:09.1 10 <- [0x00fd120000 - 0x00fd12ffff] size 0x00010000 gran 0x10 mem64 PCI: 02:09.1 18 <- [0x00fd130000 - 0x00fd13ffff] size 0x00010000 gran 0x10 mem64 PCI: 01:01.1 10 <- [0x00fd300000 - 0x00fd300fff] size 0x00001000 gran 0x0c mem64 PCI: 01:02.0 1c <- [0x0000001000 - 0x0000001fff] size 0x00001000 gran 0x0c bus 03 io PCI: 01:02.0 20 <- [0x00fd200000 - 0x00fd2fffff] size 0x00100000 gran 0x14 bus 03 mem PCI: 03:03.0 10 <- [0x00fd288000 - 0x00fd28807f] size 0x00000080 gran 0x07 mem64 PCI: 03:03.0 18 <- [0x00fd280000 - 0x00fd287fff] size 0x00008000 gran 0x0f mem64 PCI: 03:03.0 20 <- [0x0000001000 - 0x000000100f] size 0x00000010 gran 0x04 io PCI: 03:03.0 30 <- [0x00fd200000 - 0x00fd27ffff] size 0x00080000 gran 0x13 romem PCI: 01:02.1 10 <- [0x00fd301000 - 0x00fd301fff] size 0x00001000 gran 0x0c mem64 PCI: 01:03.0 1c <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x0c bus 04 io PCI: 01:03.0 20 <- [0x00fc000000 - 0x00fd0fffff] size 0x01100000 gran 0x14 bus 04 mem PCI: 04:00.0 10 <- [0x00fd020000 - 0x00fd020fff] size 0x00001000 gran 0x0c mem PCI: 04:00.1 10 <- [0x00fd021000 - 0x00fd021fff] size 0x00001000 gran 0x0c mem PCI: 04:05.0 10 <- [0x0000002450 - 0x0000002457] size 0x00000008 gran 0x03 io PCI: 04:05.0 14 <- [0x0000002470 - 0x0000002473] size 0x00000004 gran 0x02 io PCI: 04:05.0 18 <- [0x0000002460 - 0x0000002467] size 0x00000008 gran 0x03 io PCI: 04:05.0 1c <- [0x0000002480 - 0x0000002483] size 0x00000004 gran 0x02 io PCI: 04:05.0 20 <- [0x0000002440 - 0x000000244f] size 0x00000010 gran 0x04 io PCI: 04:05.0 24 <- [0x00fd024000 - 0x00fd0243ff] size 0x00000400 gran 0x0a mem PCI: 04:06.0 10 <- [0x00fc000000 - 0x00fcffffff] size 0x01000000 gran 0x18 mem PCI: 04:06.0 14 <- [0x0000002000 - 0x00000020ff] size 0x00000100 gran 0x08 io PCI: 04:06.0 18 <- [0x00fd022000 - 0x00fd022fff] size 0x00001000 gran 0x0c mem PCI: 04:06.0 30 <- [0x00fff00000 - 0x00fff1ffff] size 0x00020000 gran 0x11 romem PCI: 04:08.0 10 <- [0x00fd023000 - 0x00fd023fff] size 0x00001000 gran 0x0c mem PCI: 04:08.0 14 <- [0x0000002400 - 0x000000243f] size 0x00000040 gran 0x06 io PCI: 04:08.0 18 <- [0x00fd000000 - 0x00fd01ffff] size 0x00020000 gran 0x11 mem PNP: 002e.0 60 <- [0x00000003f0 - 0x00000003f7] size 0x00000008 gran 0x03 io PNP: 002e.0 70 <- [0x0000000006 - 0x0000000006] size 0x00000001 gran 0x00 irq PNP: 002e.0 74 <- [0x0000000002 - 0x0000000002] size 0x00000001 gran 0x00 drq PNP: 002e.2 60 <- [0x00000003f8 - 0x00000003ff] size 0x00000008 gran 0x03 io PNP: 002e.2 70 <- [0x0000000004 - 0x0000000004] size 0x00000001 gran 0x00 irq PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] size 0x00000001 gran 0x00 io PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] size 0x00000001 gran 0x00 io PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] size 0x00000001 gran 0x00 irq PNP: 002e.5 72 <- [0x000000000c - 0x000000000c] size 0x00000001 gran 0x00 irq PNP: 002e.b 60 <- [0x0000000290 - 0x0000000297] size 0x00000008 gran 0x03 io PNP: 002e.b 70 <- [0x0000000005 - 0x0000000005] size 0x00000001 gran 0x00 irq PCI: 01:04.1 20 <- [0x0000003420 - 0x000000342f] size 0x00000010 gran 0x04 io PCI: 01:04.2 10 <- [0x0000003400 - 0x000000341f] size 0x00000020 gran 0x05 io PCI: 01:04.3 58 <- [0x0000003000 - 0x00000030ff] size 0x00000100 gran 0x08 io PCI: 00:18.3 94 <- [0x00f8000000 - 0x00fbffffff] size 0x04000000 gran 0x1a mem Done setting resources. Done allocating resources. Enabling resources... PCI: 00:18.0 cmd <- 00 PCI: 01:01.0 bridge ctrl <- 0003 PCI: 01:01.0 cmd <- 06 PCI: 02:09.0 subsystem <- 10f1/2882 PCI: 02:09.0 cmd <- 02 PCI: 02:09.1 subsystem <- 10f1/2882 PCI: 02:09.1 cmd <- 02 PCI: 01:01.1 subsystem <- 10f1/2882 PCI: 01:01.1 cmd <- 06 PCI: 01:02.0 bridge ctrl <- 0003 PCI: 01:02.0 cmd <- 07 PCI: 03:03.0 cmd <- 83 PCI: 01:02.1 subsystem <- 10f1/2882 PCI: 01:02.1 cmd <- 06 PCI: 01:03.0 bridge ctrl <- 000b PCI: 01:03.0 cmd <- 07 PCI: 04:00.0 subsystem <- 10f1/2882 PCI: 04:00.0 cmd <- 02 PCI: 04:00.1 subsystem <- 10f1/2882 PCI: 04:00.1 cmd <- 02 PCI: 04:05.0 subsystem <- 10f1/2882 PCI: 04:05.0 cmd <- 03 PCI: 04:06.0 subsystem <- 10f1/2882 PCI: 04:06.0 cmd <- 83 PCI: 04:08.0 subsystem <- 10f1/2882 PCI: 04:08.0 cmd <- 03 PCI: 01:04.0 subsystem <- 10f1/2882 PCI: 01:04.0 cmd <- 0f w83627hf hwm smbus enabled PCI: 01:04.1 subsystem <- 10f1/2882 PCI: 01:04.1 cmd <- 01 PCI: 01:04.2 subsystem <- 10f1/2882 PCI: 01:04.2 cmd <- 01 PCI: 01:04.3 subsystem <- 10f1/2882 PCI: 01:04.3 cmd <- 01 PCI: 00:18.1 subsystem <- 10f1/2882 PCI: 00:18.1 cmd <- 00 PCI: 00:18.2 subsystem <- 10f1/2882 PCI: 00:18.2 cmd <- 00 PCI: 00:18.3 cmd <- 00 done. Initializing devices... Root Device init APIC_CLUSTER: 0 init Initializing CPU #0 CPU: vendor AMD device 20f12 CPU: family 0f, model 21, stepping 02 Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC DONE variable MTRRs Clear out the extra MTRR's MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled microcode: equivalent rev id = 0x0210, current patch id = 0x00000000 microcode: rev id does not match this patch. microcode: Not updated! Fix microcode_updates[] microcode: rev id does not match this patch. microcode: Not updated! Fix microcode_updates[] microcode: patch id to apply = 0x0000004d microcode: updated to patch id = 0x0000004d success CPU model Dual Core AMD Opteron(tm) Processor 265 Setting up local apic... apic_id: 0x00 done. Clearing memory 2048K - 5242880K: -----------------------------------------------++++++++++++++++ done CPU #0 Initialized CPU 0x01 would not start! CPU 0x01 did not initialize! All AP CPUs stopped PCI: 00:18.0 init PCI: 01:01.0 init PCI: 02:09.0 init PCI: 02:09.1 init PCI: 01:02.0 init PCI: 01:03.0 init PCI: 04:05.0 init PCI: 04:06.0 init rom address for PCI: 04:06.0 = fff00000 copying VGA ROM Image from 0xfff00000 to 0xc0000, 0x9000 bytes entering emulator halt_sys: file /data/personal/data/2008/projects/coreboot/buildrom9/buildrom-devel/work/coreboot/svn/src/devices/emulator/x86emu/ops.c, line 4387 PCI: 04:08.0 init PCI: 01:04.0 init amd8111: ioapic bsp_apicid = 00 RTC Init enabling HPET @0xfed00000 PNP: 002e.0 init PNP: 002e.2 init PNP: 002e.5 init Keyboard init... PNP: 002e.b init PCI: 01:04.1 init IDE1 IDE0 PCI: 01:04.3 init set power on after power fail PCI: 00:18.1 init PCI: 00:18.2 init PCI: 00:18.3 init NB: Function 3 Misc Control.. done. PCI: 03:03.0 init rom address for PCI: 03:03.0 = fd200000 copying non-VGA ROM Image from 0xfd200000 to 0xd0000, 0xf000 bytes entering emulator halt_sys: file /data/personal/data/2008/projects/coreboot/buildrom9/buildrom-devel/work/coreboot/svn/src/devices/emulator/x86emu/ops.c, line 183 Devices initialized Writing IRQ routing tables to 0xf0000... setting Onboard AMD Southbridge Assigning IRQ 10 to 1:4.2 Readback = 10 setting Onboard AMD USB Assigning IRQ 10 to 4:0.0 Readback = 10 Assigning IRQ 10 to 4:0.1 Readback = 10 setting Onboard ATI Display Adapter Assigning IRQ 11 to 4:6.0 Readback = 11 setting Slot 1 Assigning IRQ 5 to 3:3.0 Readback = 5 setting Slot 2 setting Slot 3 setting Slot 4 setting Slot 5 setting Onboard SI Serial ATA Assigning IRQ 10 to 4:5.0 Readback = 10 setting Onboard Intel NIC Assigning IRQ 11 to 4:8.0 Readback = 11 setting Onboard Adaptec SCSI setting Onboard Broadcom NIC Assigning IRQ 5 to 2:9.0 Readback = 5 Assigning IRQ 9 to 2:9.1 Readback = 9 done. Wrote the mp table end at: 00000020 - 00000200 Moving GDT to 0x500...ok Adjust low_table_end from 0x00000530 to 0x00001000 Adjust rom_table_end from 0x000f0400 to 0x00100000 Wrote coreboot table at: 00000530 - 00000ea4 checksum 9ff1 Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3 rom_stream: 0xfff09000 - 0xfffe8fff Uncompressing to RAM 0x01000000 olen = 0x001ea4b4 done. Found ELF candidate at offset 0 header_offset is 0 Try to load at offset 0x0 Dropping non PT_LOAD segment New segment addr 0x10000 size 0x54fc offset 0x144 filesize 0x1278 (cleaned up) New segment addr 0x10000 size 0x54fc offset 0x144 filesize 0x1278 New segment addr 0x20000 size 0x1070 offset 0x13bc filesize 0x0 (cleaned up) New segment addr 0x20000 size 0x1070 offset 0x13bc filesize 0x0 New segment addr 0x100000 size 0x15a2a4 offset 0x13bc filesize 0x15a2a4 (cleaned up) New segment addr 0x100000 size 0x15a2a4 offset 0x13bc filesize 0x15a2a4 New segment addr 0x25b000 size 0x73000 offset 0x15b660 filesize 0x50854 (cleaned up) New segment addr 0x25b000 size 0x73000 offset 0x15b660 filesize 0x50854 New segment addr 0x800000 size 0x3e600 offset 0x1abeb4 filesize 0x3e600 (cleaned up) New segment addr 0x800000 size 0x3e600 offset 0x1abeb4 filesize 0x3e600 Loading Segment: addr: 0x00000000bff98000 memsz: 0x00000000000054fc filesz: 0x0000000000001278 Clearing Segment: addr: 0x00000000bff99278 memsz: 0x0000000000004284 Loading Segment: addr: 0x00000000bffa8000 memsz: 0x0000000000001070 filesz: 0x0000000000000000 Clearing Segment: addr: 0x00000000bffa8000 memsz: 0x0000000000001070 Loading Segment: addr: 0x0000000000100000 memsz: 0x000000000015a2a4 filesz: 0x000000000015a2a4 Loading Segment: addr: 0x000000000025b000 memsz: 0x0000000000073000 filesz: 0x0000000000050854 Clearing Segment: addr: 0x00000000002ab854 memsz: 0x00000000000227ac Loading Segment: addr: 0x0000000000800000 memsz: 0x000000000003e600 filesz: 0x000000000003e600 Jumping to boot code at 0x10000 Unknown firmware type: coreboot Firmware type: LinuxBIOS mount: Mounting usbfs on /proc/bus/usb failed: Unknown error 2 Press enter to start the busybox shell (pausing 5 seconds). Trying to boot from hdd. __ __ _____ _ ___ \ \/ /___ _ __ |___ / / | / _ \ \ // _ \ '_ \ |_ \ | || | | | / \ __/ | | | ___) || || |_| | /_/\_\___|_| |_| |____(_)_(_)___/ http://www.cl.cam.ac.uk/netos/xen University of Cambridge Computer Laboratory Xen version 3.1.0 (root@[unknown]) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) Fri Nov 9 12:11:30 EST 2007 Latest ChangeSet: unavailable (XEN) Command line: /hdd///xen-3.1.0.gz com1=115200,8n1 cdb=com1 (XEN) 0000000000000000 - 0000000000001000 (reserved) (XEN) 0000000000001000 - 00000000000a0000 (usable) (XEN) 0000000000100000 - 00000000c0000000 (usable) (XEN) 0000000100000000 - 0000000140000000 (usable) (XEN) System RAM: 4095MB (4193916kB) (XEN) ACPI: Unable to locate RSDP (XEN) Xen heap: 13MB (14128kB) (XEN) Domain heap initialised: DMA width 32 bits (XEN) Processor #0 15:1 APIC version 16 (XEN) Enabling APIC mode: Flat. Using 3 I/O APICs (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 1792.239 MHz processor. (XEN) CPU0: AMD Dual Core AMD Opteron(tm) Processor 265 stepping 02 (XEN) Mapping cpu 0 to node 255 (XEN) Total of 1 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) Platform timer is 1.193MHz PIT (XEN) Brought up 1 CPUs (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 -> 0xffffffff805a8e6c (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000134000000->0000000138000000 (978415 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff80200000->ffffffff805a8e6c (XEN) Init. ramdisk: ffffffff805a9000->ffffffff8181e800 (XEN) Phys-Mach map: ffffffff8181f000->ffffffff81fb5f78 (XEN) Start info: ffffffff81fb6000->ffffffff81fb649c (XEN) Page tables: ffffffff81fb7000->ffffffff81fcc000 (XEN) Boot stack: ffffffff81fcc000->ffffffff81fcd000 (XEN) TOTAL: ffffffff80000000->ffffffff82400000 (XEN) ENTRY ADDRESS: ffffffff80200000 (XEN) Dom0 has maximum 1 VCPUs (XEN) Initrd len 0x1275800, start at 0xffffffff805a9000 (XEN) Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: Errors and warnings (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen). kernel direct mapping tables up to f35ef000 @ 1fce000-276e000 Bootdata ok (command line is root=/dev/md1 ro console=tty0 console=ttyS0,115200) Linux version 2.6.18-xen (root@pegasus.gnu.org) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Thu Nov 8 18:26:21 EST 2007 BIOS-provided physical RAM map: Xen: 0000000000000000 - 00000000f35ef000 (usable) DMI not present or invalid. ACPI: Unable to locate RSDP Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: TYAN Product ID: S2882 APIC at: 0xFEE00000 I/O APIC #2 Version 17 at 0xFEC00000. I/O APIC #3 Version 17 at 0xFD300000. I/O APIC #4 Version 17 at 0xFD301000. Setting APIC routing to xen Processors: 1 Allocating PCI resources starting at c4000000 (gap: c0000000:40000000) Built 1 zonelists. Total pages: 996847 Kernel command line: root=/dev/md1 ro console=tty0 console=ttyS0,115200 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Xen reported: 1792.239 MHz processor. Console: colour VGA+ 80x50 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Software IO TLB enabled: Aperture: 64 megabytes Kernel range: ffff880006486000 - ffff88000a486000 Address size: 27 bits PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Memory: 3812988k/3987388k available (1996k kernel code, 165576k reserved, 867k data, 172k init) Calibrating delay using timer specific routine.. 3585.49 BogoMIPS (lpj=17927467) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code Freeing SMP alternatives: 24k freed GSI 16 sharing vector 0x70 and IRQ 16 GSI 17 sharing vector 0x78 and IRQ 17 GSI 18 sharing vector 0x88 and IRQ 18 GSI 19 sharing vector 0x90 and IRQ 19 GSI 24 sharing vector 0x98 and IRQ 24 GSI 25 sharing vector 0xA0 and IRQ 25 GSI 26 sharing vector 0xA8 and IRQ 26 GSI 27 sharing vector 0xB0 and IRQ 27 GSI 28 sharing vector 0xB8 and IRQ 28 GSI 29 sharing vector 0xC0 and IRQ 29 GSI 30 sharing vector 0xC8 and IRQ 30 GSI 31 sharing vector 0xD0 and IRQ 31 Brought up 1 CPUs migration_cost=0 checking if image is initramfs... it is Freeing initrd memory: 18902k freed NET: Registered protocol family 16 PCI: Using configuration type 1 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled xen_mem: Initialising balloon driver. PCI: Probing PCI hardware PCI: Discovered primary peer bus 01 [IRQ] PCI: Using IRQ router default [1022/746b] at 0000:01:04.3 PCI->APIC IRQ transform: 0000:01:04.2[D] -> IRQ 19 PCI->APIC IRQ transform: 0000:02:09.0[A] -> IRQ 24 PCI->APIC IRQ transform: 0000:02:09.1[B] -> IRQ 25 PCI->APIC IRQ transform: 0000:03:03.0[A] -> IRQ 28 PCI->APIC IRQ transform: 0000:04:00.0[D] -> IRQ 19 PCI->APIC IRQ transform: 0000:04:00.1[D] -> IRQ 19 PCI->APIC IRQ transform: 0000:04:05.0[A] -> IRQ 19 PCI->APIC IRQ transform: 0000:04:06.0[A] -> IRQ 18 PCI->APIC IRQ transform: 0000:04:08.0[A] -> IRQ 18 PCI: Bridge: 0000:01:01.0 IO window: disabled. MEM window: fd100000-fd1fffff PREFETCH window: c4000000-c40fffff PCI: Bridge: 0000:01:02.0 IO window: 1000-1fff MEM window: fd200000-fd2fffff PREFETCH window: disabled. PCI: Bridge: 0000:01:03.0 IO window: 2000-2fff MEM window: fc000000-fd0fffff PREFETCH window: c4100000-c41fffff NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered IA-32 Microcode Update Driver: v1.14a-xen audit: initializing netlink socket (disabled) audit(1219269931.050:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for subordinate bus. PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for subordinate bus. Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) Xen virtual console successfully installed as ttyS0 Event-channel device installed. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 1 NET: Registered protocol family 17 Freeing unused kernel memory: 172k freed Loading, please wait... input: AT Translated Set 2 keyboard as /class/input/input0 Begin: Loading essential drivers... ... fuse init (API version 7.7) device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com md: linear personality registered for level -1 md: multipath personality registered for level -4 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 raid5: automatically using best checksumming function: generic_sse generic_sse: 4728.000 MB/sec raid5: using function: generic_sse (4728.000 MB/sec) raid6: int64x1 1803 MB/s raid6: int64x2 2457 MB/s raid6: int64x4 2391 MB/s raid6: int64x8 942 MB/s raid6: sse2x1 2105 MB/s raid6: sse2x2 2772 MB/s raid6: sse2x4 3059 MB/s raid6: using algorithm sse2x4 (3059 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: raid10 personality registered for level 10 Done. Begin: Running /scripts/init-premount ... Done. Begin: Mounting root file system... ... Begin: Running /scripts/local-top ... Done. Begin: Waiting for root file system... ... SCSI subsystem initialized ata1: SATA max UDMA/100 cmd 0xFFFFC20000030000 ctl 0x0 bmdma 0x0 irq 28 ata2: SATA max UDMA/100 cmd 0xFFFFC20000032000 ctl 0x0 bmdma 0x0 irq 28 ata3: SATA max UDMA/100 cmd 0xFFFFC20000034000 ctl 0x0 bmdma 0x0 irq 28 ata4: SATA max UDMA/100 cmd 0xFFFFC20000036000 ctl 0x0 bmdma 0x0 irq 28 scsi0 : sata_sil24 usbcore: registered new driver usbfs usbcore: registered new driver hub e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation ata1: SATA link down (SStatus 0 SControl 300) scsi1 : sata_sil24 input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 ata2: SATA link down (SStatus 0 SControl 300) scsi2 : sata_sil24 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATA-6, max UDMA/133, 488397168 sectors: LBA48 ata3.00: ata3: dev 0 multi count 0 ata3.00: configured for UDMA/100 scsi3 : sata_sil24 ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ATA-6, max UDMA/133, 488397168 sectors: LBA48 ata4.00: ata4: dev 0 multi count 0 ata4.00: configured for UDMA/100 Vendor: ATA Model: WDC WD2500SD-01K Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD2500SD-01K Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 05 ohci_hcd 0000:04:00.0: OHCI Host Controller ohci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:04:00.0: irq 19, io mem 0xfd020000 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off SCSI device sda: drive cache: write back sda: sda1 sd 2:0:0:0: Attached scsi disk sda SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write back SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write back sdb:<6>usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected sdb1 sd 3:0:0:0: Attached scsi disk sdb sd 2:0:0:0: Attached scsi generic sg0 type 0 sd 3:0:0:0: Attached scsi generic sg1 type 0 ohci_hcd 0000:04:00.1: OHCI Host Controller ohci_hcd 0000:04:00.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:04:00.1: irq 19, io mem 0xfd021000 md: md0 stopped. md: md1 stopped. md: md2 stopped. usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected md: md0 stopped. md: md1 stopped. md: md2 stopped. ata5: SATA max UDMA/100 cmd 0xFFFFC2000003E080 ctl 0xFFFFC2000003E08A bmdma 0xFFFFC2000003E000 irq 19 ata6: SATA max UDMA/100 cmd 0xFFFFC2000003E0C0 ctl 0xFFFFC2000003E0CA bmdma 0xFFFFC2000003E008 irq 19 ata7: SATA max UDMA/100 cmd 0xFFFFC2000003E280 ctl 0xFFFFC2000003E28A bmdma 0xFFFFC2000003E200 irq 19 ata8: SATA max UDMA/100 cmd 0xFFFFC2000003E2C0 ctl 0xFFFFC2000003E2CA bmdma 0xFFFFC2000003E208 irq 19 scsi4 : sata_sil ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata5.00: ATA-6, max UDMA/133, 488395055 sectors: LBA48 ata5.00: ata5: dev 0 multi count 0 ata5.00: configured for UDMA/100 scsi5 : sata_sil ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata6.00: ATA-6, max UDMA/133, 488397168 sectors: LBA48 ata6.00: ata6: dev 0 multi count 0 ata6.00: configured for UDMA/100 scsi6 : sata_sil ata7: SATA link down (SStatus 0 SControl 310) scsi7 : sata_sil ata8: SATA link down (SStatus 0 SControl 310) Vendor: ATA Model: WDC WD2500SD-01K Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdc: 488395055 512-byte hdwr sectors (250058 MB) sdc: Write Protect is off SCSI device sdc: drive cache: write back SCSI device sdc: 488395055 512-byte hdwr sectors (250058 MB) sdc: Write Protect is off SCSI device sdc: drive cache: write back sdc: sdc1 sdc2 sdc3 sdc4 sd 4:0:0:0: Attached scsi disk sdc sd 4:0:0:0: Attached scsi generic sg2 type 0 Vendor: ATA Model: WDC WD2500SD-01K Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB) sdd: Write Protect is off SCSI device sdd: drive cache: write back SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB) sdd: Write Protect is off SCSI device sdd: drive cache: write back sdd: sdd1 sdd2 sdd3 sdd4 sd 5:0:0:0: Attached scsi disk sdd sd 5:0:0:0: Attached scsi generic sg3 type 0 AMD8111: IDE controller at PCI slot 0000:01:04.1 AMD8111: chipset revision 3 AMD8111: not 100% native mode: will probe irqs later AMD8111: 0000:01:04.1 (rev 03) UDMA133 controller ide0: BM-DMA at 0x3420-0x3427, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x3428-0x342f, BIOS settings: hdc:pio, hdd:pio md: md0 stopped. md: bind md: md1 stopped. md: md2 stopped. md: md0 stopped. md: unbind md: export_rdev(sdd1) md: bind md: bind raid1: raid set md0 active with 2 out of 2 mirrors md: md1 stopped. md: bind md: bind raid1: raid set md1 active with 2 out of 2 mirrors md: md2 stopped. md: bind md: bind raid1: raid set md2 active with 2 out of 2 mirrors Done. Begin: Running /scripts/local-premount ... Done. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Begin: Running /scripts/local-bottom ... Done. Done. Begin: Running /scripts/init-bottom ... Done. tg3.c:v3.65 (August 07, 2006) eth0: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:2b:66:8a eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[769f4000] dma_mask[64-bit] eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:2b:66:8b eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[769f4000] dma_mask[64-bit] e100: eth2: e100_probe: addr 0xfd023000, irq 18, MAC addr 00:E0:81:2B:66:2C * Reading files needed to boot... [ OK ] * Preparing restricted drivers... [ OK ] * Setting the system clock * Starting basic networking... [ OK ] * Starting kernel event manager... [ OK ] * Loading hardware drivers... ts: Compaq touchscreen protocol output NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6 over IPv4 tunneling driver md: bind md: bind raid1: raid set md5 active with 2 out of 2 mirrors input: PC Speaker as /class/input/input2 tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready AMD768 RNG detected [ OK ] * Setting the system clock * Loading kernel modules... * Loading manual drivers... lp: driver loaded but no devices found [ OK ] * Setting kernel variables... error: "kernel.maps_protect" is an unknown key error: "vm.mmap_min_addr" is an unknown key [fail] * Activating swap... [ OK ] * Checking root file system... fsck 1.40.8 (13-Mar-2008) /dev/md1: clean, 205752/1221600 files, 1015604/2441856 blocks [ OK ] * Checking file systems... fsck 1.40.8 (13-Mar-2008) /dev/md0: clean, 67/124928 files, 141394/497856 blocks [ OK ] * Mounting local filesystems... [ OK ] * Activating swapfile swap... [ OK ] $Mounting securityfs on /sys/kernel/security: done. ls: cannot access /sys/module/apparmor: No such file or directory ls: cannot access /sys/module/apparmor: No such file or directory $Loading AppArmor module: Failed. * Checking minimum space in /tmp... [ OK ] * Skipping firewall: ufw (not enabled)... [ OK ] * Configuring network interfaces... [ OK ] * Setting console screen modes and fonts * Starting system log daemon... [ OK ] * Starting kernel log daemon... [ OK ] * Starting OpenBSD Secure Shell server sshd [ OK ] * Starting Common Unix Printing System: cupsd [ OK ] * Starting MTA [ OK ] FATAL: Error inserting battery (/lib/modules/2.6.18-xen/kernel/drivers/acpi/battery.ko): No such device * Starting powernowd... * CPU frequency scaling not supported... [ OK ] * sadc not enabled in /etc/default/sysstat, not starting. * Starting MD monitoring service mdadm --monitor [ OK ] Debian GNU/Linux ttyS0 115200 (DIRECT) **EMSI_REQA77E pegasus.gnu.org login: * Reloading OpenBSD Secure Shell server's configuration sshd Starting auto Xen domains: nessus.cfgcut: fields and positions are numbered from 1 Try `cut --help' for more information. playground.cfgcut: fields and positions are numbered from 1 Try `cut --help' for more information. cut: fields and positions are numbered from 1 Try `cut --help' for more information. * [done] * Starting anac(h)ronistic cron anacron [ OK ] * Starting deferred execution scheduler atd [ OK ] * Starting periodic command scheduler crond [ OK ] * Enabling additional executable binary formats binfmt-support [ OK ] * Enabling laptop mode... [ OK ] * Running local boot scripts (/etc/rc.local) [ OK ] Debian GNU/Linux ttyS0 115200 (DIRECT) **EMSI_REQA77E pegasus.gnu.org login: Debian GNU/Linux ttyS0 115200 (DIRECT) **EMSI_REQA77E pegasus.gnu.org login: