jtag> cable DLC5 parallel 0x378
Initializing parallel port at 0x378
jtag> detect
IR length: 7
Chain length: 1
Device Id: 00011001001001110111000000010011 (0x0000000019277013)
  Manufacturer: Intel
  Part(0):         IXP425-266MHz
  Stepping:     B0
  Filename:     /usr/local/share/urjtag/intel/ixp425/ixp425
jtag> detectflash 0x0
Query identification string:
        Primary Algorithm Command Set and Control Interface ID Code: 0x0001 (Intel/Sharp Extended Command Set)
        Alternate Algorithm Command Set and Control Interface ID Code: 0x0000 (null)
Query system interface information:
        Vcc Logic Supply Minimum Write/Erase or Write voltage: 2700 mV
        Vcc Logic Supply Maximum Write/Erase or Write voltage: 3600 mV
        Vpp [Programming] Supply Minimum Write/Erase voltage: 0 mV
        Vpp [Programming] Supply Maximum Write/Erase voltage: 0 mV
        Typical timeout per single byte/word program: 256 us
        Typical timeout for maximum-size multi-byte program: 256 us
        Typical timeout per individual block erase: 2048 ms
        Typical timeout for full chip erase: 0 ms
        Maximum timeout for byte/word program: 1024 us
        Maximum timeout for multi-byte program: 1024 us
        Maximum timeout per individual block erase: 16384 ms
        Maximum timeout for chip erase: 0 ms
Device geometry definition:
        Device Size: 16777216 B (16384 KiB, 16 MiB)
        Flash Device Interface Code description: 0x0002 (x8/x16)
        Maximum number of bytes in multi-byte program: 32
        Number of Erase Block Regions within device: 1
        Erase Block Region Information:
                Region 0:
                        Erase Block Size: 131072 B (128 KiB)
                        Number of Erase Blocks: 128
jtag> print
 No. Manufacturer              Part                 Stepping Instruction          Register
-------------------------------------------------------------------------------------------------------------------
   0 Intel                     IXP425-266MHz        B0       EXTEST               BSR

Active bus:
*0: Intel IXP425 compatible bus driver via BSR (JTAG part No. 0)
        start: 0x00000000, length: 0x100000000, data width: 16 bit
jtag>