Linux version 2.6.25-gentoo-r8 (root@Shai_Laptop) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #1 SMP Wed Nov 5 05:08:08 CET 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009b400 (usable) BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fed0000 (usable) BIOS-e820: 000000007fed0000 - 000000007fee3000 (ACPI NVS) BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 1150MB HIGHMEM available. 896MB LOWMEM available. Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at [c00f71a0] 000f71a0 Entering add_active_range(0, 0, 523984) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 523984 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 523984 On node 0 totalpages: 523984 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 2301 pages used for memmap HighMem zone: 292307 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI present. ACPI: RSDP 000F7120, 0024 (r2 TOSCPL) ACPI: XSDT 7FED7ABF, 0094 (r1 TOSCPL TOSCPL00 6040000 LTP 0) ACPI: FACP 7FEDFB60, 00F4 (r3 TOSCPL CRESTLNE 6040000 ALAN 1) ACPI: DSDT 7FED8E1A, 6CD2 (r2 TOSCPL CRESTLNE 6040000 INTL 20060608) ACPI: FACS 7FEE2FC0, 0040 ACPI: APIC 7FEDFC54, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A) ACPI: HPET 7FEDFCBC, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A) ACPI: MCFG 7FEDFCF4, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A) ACPI: TCPA 7FEDFD30, 0032 (r1 Intel CRESTLNE 6040000 LOHR 5A) ACPI: TMOR 7FEDFD62, 0026 (r1 PTLTD 6040000 PTL 3) ACPI: SLIC 7FEDFD88, 0176 (r1 TOSCPL TOSCPL00 6040000 LOHR 0) ACPI: OSFR 7FEDFEFE, 0072 (r1 TOSHIB A+2nd ID 6040000 TASM 4010000) ACPI: APIC 7FEDFF70, 0068 (r1 PTLTD APIC 6040000 LTP 0) ACPI: BOOT 7FEDFFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: SSDT 7FED8B6D, 02AD (r1 SataRe SataAhci 1000 INTL 20050624) ACPI: SSDT 7FED80DF, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) ACPI: SSDT 7FED8039, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624) ACPI: SSDT 7FED7B53, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: DMI detected: Toshiba ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519891 Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda3 udev mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1795.649 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2070280k/2095936k available (2892k kernel code, 24424k reserved, 1118k data, 276k init, 1178432k highmem) virtual kernel memory layout: fixmap : 0xffc74000 - 0xfffff000 (3628 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc04f5000 - 0xc053a000 ( 276 kB) .data : 0xc03d3202 - 0xc04ead18 (1118 kB) .text : 0xc0100000 - 0xc03d3202 (2892 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay using timer specific routine.. 3594.26 BogoMIPS (lpj=17971349) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. Freeing SMP alternatives: 24k freed ACPI: Core revision 20070126 CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d Booting processor 1/1 ip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3591.01 BogoMIPS (lpj=17955090) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d Total of 2 processors activated (7185.28 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs CPU0 attaching sched-domain: domain 0: span 00000000,00000003 groups: 00000000,00000001 00000000,00000002 CPU1 attaching sched-domain: domain 0: span 00000000,00000003 groups: 00000000,00000002 00000000,00000001 net_namespace: 244 bytes NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored via DMI ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved system 00:06: ioport range 0x680-0x69f has been reserved system 00:06: ioport range 0x800-0x80f has been reserved system 00:06: ioport range 0x1000-0x107f has been reserved system 00:06: ioport range 0x1180-0x11bf has been reserved system 00:06: ioport range 0xfe00-0xfe00 has been reserved system 00:06: ioport range 0xff00-0xff7f has been reserved PCI: Bridge: 0000:00:01.0 IO window: 2000-2fff MEM window: 0xc7e00000-0xc7efffff PREFETCH window: 0x00000000d0000000-0x00000000dfffffff PCI: Bridge: 0000:00:1c.0 IO window: 3000-3fff MEM window: 0xc0000000-0xc3ffffff PREFETCH window: 0x00000000cc000000-0x00000000cdffffff PCI: Bridge: 0000:00:1c.1 IO window: 4000-4fff MEM window: 0xf0000000-0xf3ffffff PREFETCH window: 0x00000000fa000000-0x00000000fbffffff PCI: Bridge: 0000:00:1c.2 IO window: 5000-5fff MEM window: 0xf4000000-0xf7ffffff PREFETCH window: 0x00000000fc000000-0x00000000fdffffff PCI: Bridge: 0000:00:1c.3 IO window: 6000-6fff MEM window: 0xb8000000-0xbbffffff PREFETCH window: 0x00000000c8000000-0x00000000c9ffffff PCI: Bridge: 0000:09:00.0 IO window: disabled. MEM window: 0xf8000000-0xf84fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: disabled. MEM window: 0xf8000000-0xf84fffff PREFETCH window: disabled. PCI: Bus 13, cardbus bridge: 0000:0c:04.0 IO window: 0x00007000-0x000070ff IO window: 0x00007400-0x000074ff PREFETCH window: 0x88000000-0x8bffffff MEM window: 0x90000000-0x93ffffff PCI: Bridge: 0000:00:1e.0 IO window: 7000-7fff MEM window: 0xf8500000-0xf85fffff PREFETCH window: 0x0000000088000000-0x000000008bffffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:09:00.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:0c:04.0[A] -> GSI 16 (level, low) -> IRQ 16 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 2541k freed Simple Boot Flag at 0x36 set to 0x1 Machine check exception polling timer started. highmem bounce pool size: 64 pages squashfs: version 3.3 (2007/10/31) Phillip Lougher NTFS driver 2.1.29 [Flags: R/O]. SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered (default) pci 0000:01:00.0: Boot video device PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie02] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Allocate Port Service[0000:00:1c.1:pcie03] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] Allocate Port Service[0000:00:1c.2:pcie03] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] Allocate Port Service[0000:00:1c.3:pcie03] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] Allocate Port Service[0000:00:1c.4:pcie03] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /class/input/input0 Uniform Multi-Platform E-IDE driver ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 ICH8M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x18a0-0x18a7, BIOS settings: hda:DMA, hdb:PIO ide1: BM-DMA at 0x18a8-0x18af, BIOS settings: hdc:PIO, hdd:PIO Probing IDE interface ide0... hda: TOSHIBA DVDW/HD TS-L802A, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected Probing IDE interface ide1... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 8192kB Cache Uniform CD-ROM driver Revision: 3.20 Loading iSCSI transport class v2.0-869. iscsi: registered transport (tcp) Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods SCSI Media Changer driver v0.25 Driver 'ch' needs updating - please use bus_type methods aoe: AoE v47 initialised. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 EISA: Probing bus 0 at eisa.0 Cannot allocate resource for EISA slot 1 Cannot allocate resource for EISA slot 2 Cannot allocate resource for EISA slot 3 Cannot allocate resource for EISA slot 4 Cannot allocate resource for EISA slot 5 Cannot allocate resource for EISA slot 6 Cannot allocate resource for EISA slot 7 EISA: Detected 0 cards. cpuidle: using governor ladder TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. Using IPI Shortcut mode Freeing unused kernel memory: 276k freed No dock devices found. libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 Synaptics Touchpad, model: 1, fw: 6.5, id: 0x82e0b1, caps: 0xb04711/0xe0440d synaptics: Toshiba Satellite A200 detected, limiting rate to 40pps. input: SynPS/2 Synaptics TouchPad as /class/input/input2 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m2048@0xf8804000 port 0xf8804100 irq 19 ata2: SATA max UDMA/133 abar m2048@0xf8804000 port 0xf8804180 irq 19 ata3: SATA max UDMA/133 abar m2048@0xf8804000 port 0xf8804200 irq 19 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: TOSHIBA MK2035GSS, DK020M, max UDMA/100 ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/100 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2035GS DK02 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 NCR53c406a: no available ports found scsi: Detection failed (no card) GDT-HA: Storage RAID Controller Driver. Version: 3.05 GDT-HA: Found 0 PCI Storage RAID Controllers qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsFailed initialization of WD-7000 SCSI card! NCR53c406a: no available ports found sym53c416.c: Version 1.0.0-ac Fusion MPT base driver 3.04.06 Copyright (c) 1999-2007 LSI Corporation Fusion MPT SPI Host driver 3.04.06 Fusion MPT FC Host driver 3.04.06 Fusion MPT SAS Host driver 3.04.06 3ware Storage Controller device driver for Linux v1.26.02.002. 3ware 9000 Storage Controller device driver for Linux v2.26.02.010. Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 3.6.20) Adaptec aacraid driver 1.1-5[2455]-ms megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.03.16-rc1 Thu. Nov. 07 10:09:32 PDT 2007 QLogic Fibre Channel HBA Driver Emulex LightPulse Fibre Channel SCSI driver 8.2.5 Copyright(c) 2004-2008 Emulex. All rights reserved. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8804800 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8804c00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected Initializing USB Mass Storage driver... usb 1-3: new high speed USB device using ehci_hcd and address 2 usb 1-3: configuration #1 chosen from 1 choice hub 2-0:1.0: unable to enumerate USB device on port 2 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver usb 5-2: new low speed USB device using uhci_hcd and address 2 usb 5-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: HID 04d9:0420 as /class/input/input3 input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0420] on usb-0000:00:1d.0-2 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver sl811: driver sl811-hcd, 19 May 2005 ACPI: PCI Interrupt 0000:0c:04.1[B] -> GSI 17 (level, low) -> IRQ 17 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f8502000-f85027ff] Max Packet=[2048] IR/IT contexts=[4/8] device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 async_tx: api initialized (async) xor: automatically using best checksumming function: pIII_sse pIII_sse : 6680.400 MB/sec xor: using function: pIII_sse (6680.400 MB/sec) raid6: int32x1 705 MB/s raid6: int32x2 687 MB/s raid6: int32x4 587 MB/s raid6: int32x8 515 MB/s raid6: mmxx1 2339 MB/s raid6: mmxx2 2450 MB/s raid6: sse1x1 1577 MB/s raid6: sse1x2 1896 MB/s raid6: sse2x1 2912 MB/s raid6: sse2x2 3121 MB/s raid6: using algorithm sse2x2 (3121 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: raid10 personality registered for level 10 JFS: nTxBlock = 8192, nTxLock = 65536 Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f77ad4034fb] kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Real Time Clock Driver v1.12ac r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:04:00.0 to 64 r8169 0000:04:00.0: no MSI. Back to INTx. eth0: RTL8101e at 0xf8a48000, 00:1b:38:1c:79:ae, XID 34000000 IRQ 17 ACPI: SSDT 7FED886D, 0238 (r1 PmRef Cpu0Ist 3000 INTL 20050624) ACPI: SSDT 7FED833E, 04AA (r1 PmRef Cpu0Cst 3001 INTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7FED8AA5, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624) ACPI: SSDT 7FED87E8, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) input: Power Button (FF) as /class/input/input4 Yenta: CardBus bridge found at 0000:0c:04.0 [1179:ff00] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:0c:04.0, mfunc 0x10a01b22, devctl 0x64 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input5 iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.23k iwl4965: Copyright(c) 2003-2007 Intel Corporation ACPI: Lid Switch [LID0] input: Power Button (CM) as /class/input/input6 Marking TSC unstable due to: TSC halts in idle. ACPI: Power Button (CM) [PWRB] ACPI: AC Adapter [ACAD] (on-line) ACPI: device:05 is registered as cooling_device2 input: Video Bus as /class/input/input7 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) input: Video Bus as /class/input/input8 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#0c) from #0d to #10 pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff cs: IO port probe 0x7000-0x7fff: clean. pcmcia: parent PCI bridge Memory window: 0xf8500000 - 0xf85fffff pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1b.0 to 64 ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:05:00.0 to 64 iwl4965: Detected Intel Wireless WiFi Link 4965AGN iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels phy0: Selected rate control algorithm 'iwl-4965-rs' ACPI: Battery Slot [BAT1] (battery present) hda_codec: Unknown model for ALC268, trying auto-probe from BIOS... ACPI: PCI interrupt for device 0000:05:00.0 disabled cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x002f0012 ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:01:00.1 to 64 Clocksource tsc unstable (delta = -483846149 ns) EXT3 FS on sda3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda4, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 4008208k swap on /dev/sda2. Priority:-1 extents:1 across:4008208k r8169: eth0: link up r8169: eth0: link up NET: Registered protocol family 10 lo: Disabled Privacy Extensions eth0: no IPv6 routers present