Initializing cgroup subsys cpuset Linux version 2.6.26.6-79.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Fri Oct 17 14:20:33 EDT 2008 Command line: ro root=UUID=5440f69a-2fa2-4029-9f57-1f13ba80f876 rhgb quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cff80000 (usable) BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data) BIOS-e820: 00000000cff8e000 - 00000000cffe0000 (ACPI NVS) BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) Entering add_active_range(0, 0, 159) 0 entries of 25600 used Entering add_active_range(0, 256, 851840) 1 entries of 25600 used Entering add_active_range(0, 1048576, 1245184) 2 entries of 25600 used max_pfn_mapped = 1245184 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping DMI 2.4 present. ACPI: RSDP 000FBB80, 0024 (r2 ACPIAM) ACPI: XSDT CFF80100, 0054 (r1 A_M_I_ OEMXSDT 6000811 MSFT 97) ACPI: FACP CFF80290, 00F4 (r3 A_M_I_ OEMFACP 6000811 MSFT 97) ACPI: DSDT CFF80440, 9CA9 (r1 A0834 A0834087 87 INTL 20060113) ACPI: FACS CFF8E000, 0040 ACPI: APIC CFF80390, 006C (r1 A_M_I_ OEMAPIC 6000811 MSFT 97) ACPI: MCFG CFF80400, 003C (r1 A_M_I_ OEMMCFG 6000811 MSFT 97) ACPI: OEMB CFF8E040, 0081 (r1 A_M_I_ AMI_OEM 6000811 MSFT 97) ACPI: HPET CFF8A0F0, 0038 (r1 A_M_I_ OEMHPET 6000811 MSFT 97) ACPI: OSFR CFF8A130, 00B0 (r1 A_M_I_ OEMOSFR 6000811 MSFT 97) No NUMA configuration found Faking a node at 0000000000000000-0000000130000000 Entering add_active_range(0, 0, 159) 0 entries of 25600 used Entering add_active_range(0, 256, 851840) 1 entries of 25600 used Entering add_active_range(0, 1048576, 1245184) 2 entries of 25600 used Bootmem setup node 0 0000000000000000-0000000130000000 NODE_DATA [000000000000e000 - 0000000000022fff] bootmap [0000000000023000 - 0000000000048fff] pages 26 early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] TRAMPOLINE early res: 2 [200000-84c54b] TEXT DATA BSS early res: 3 [37d16000-37fef6dd] RAMDISK early res: 4 [9fc00-fffff] BIOS reserved early res: 5 [8000-dfff] PGTABLE [ffffe20000000000-ffffe20002dfffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0 [ffffe20003800000-ffffe200043fffff] PMD -> [ffff81000c000000-ffff81000cbfffff] on node 0 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1245184 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0 -> 159 0: 256 -> 851840 0: 1048576 -> 1245184 On node 0 totalpages: 1048351 DMA zone: 56 pages used for memmap DMA zone: 1719 pages reserved DMA zone: 2224 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833464 pages, LIFO batch:31 Normal zone: 2688 pages used for memmap Normal zone: 193920 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a301 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000 PM: Registered nosave memory: 00000000cff8e000 - 00000000cffe0000 PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000 PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000) SMP: Allowing 4 CPUs, 2 hotplug CPUs PERCPU: Allocating 45104 bytes of per cpu data NR_CPUS: 64, nr_cpu_ids: 4 Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029608 Policy zone: Normal Kernel command line: ro root=UUID=5440f69a-2fa2-4029-9f57-1f13ba80f876 rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER time.c: Detected 2999.646 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x4000000 - 0x8000000 Memory: 4058088k/4980736k available (2703k kernel code, 135316k reserved, 1485k data, 980k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 hpet clockevent registered Calibrating delay using timer specific routine.. 6002.63 BogoMIPS (lpj=3001319) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20080321 CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06 Using local APIC timer interrupts. APIC timer calibration result 20830875 Detected 20.830 MHz APIC timer. Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5999.08 BogoMIPS (lpj=2999540) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (12001.71 BogoMIPS). sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=5792 bytes CPU0 attaching sched-domain: domain 0: span 0-1 groups: 0 1 domain 1: span 0-1 groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 groups: 1 0 domain 1: span 0-1 groups: 0-1 net_namespace: 1224 bytes Booting paravirtualized kernel on bare hardware Time: 20:11:25 Date: 11/06/08 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - efffffff ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.4. It can be enabled forcedly with 'pcie_aspm=force' PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 8F, should be 86 [20080321] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 17 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved system 00:07: ioport range 0x290-0x297 has been reserved system 00:08: ioport range 0x4d0-0x4d1 has been reserved system 00:08: ioport range 0x800-0x87f has been reserved system 00:08: ioport range 0x480-0x4bf has been reserved system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved system 00:08: iomem range 0xffa00000-0xffafffff has been reserved system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved system 00:08: iomem range 0xffe00000-0xffefffff could not be reserved system 00:08: iomem range 0xfff00000-0xfffffffe could not be reserved system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved system 00:10: iomem range 0x0-0x9ffff could not be reserved system 00:10: iomem range 0xc0000-0xcffff has been reserved system 00:10: iomem range 0xe0000-0xfffff could not be reserved system 00:10: iomem range 0x100000-0xcfffffff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: b000-bfff MEM window: 0xf4000000-0xf7dfffff PREFETCH window: 0x00000000d0000000-0x00000000dfffffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: 0x00000000f2f00000-0x00000000f2ffffff PCI: Bridge: 0000:00:1c.4 IO window: d000-dfff MEM window: 0xf7f00000-0xf7ffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.5 IO window: c000-cfff MEM window: 0xf7e00000-0xf7efffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: e000-efff MEM window: 0xf8000000-0xfebfffff PREFETCH window: 0x00000000f0000000-0x00000000f00fffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.5 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 2917k freed audit: initializing netlink socket (disabled) type=2000 audit(1226002284.378:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7931 SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] Allocate Port Service[0000:00:1c.4:pcie03] PCI: Setting latency timer of device 0000:00:1c.5 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.5:pcie00] Allocate Port Service[0000:00:1c.5:pcie02] Allocate Port Service[0000:00:1c.5:pcie03] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button (CM) [PWRB] ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: ACPI0007:01 is registered as cooling_device1 hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 Magic number: 0:220:194 Freeing unused kernel memory: 980k freed Write protecting the kernel read-only data: 3852k ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf3fffc00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.26.6-79.fc9.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3fff800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.26.6-79.fc9.x86_64 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-3: new high speed USB device using ehci_hcd and address 2 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.26.6-79.fc9.x86_64 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.26.6-79.fc9.x86_64 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.2 to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 1-3: configuration #1 chosen from 1 choice usb 1-3: New USB device found, idVendor=0b05, idProduct=1742 usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3: Product: 802.11 n WLAN usb 1-3: Manufacturer: Ralink usb 1-3: SerialNumber: 1.0 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.26.6-79.fc9.x86_64 uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.26.6-79.fc9.x86_64 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.26.6-79.fc9.x86_64 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected usb 2-2: new high speed USB device using ehci_hcd and address 3 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.26.6-79.fc9.x86_64 uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods libata version 3.00 loaded. ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ACPI: PCI interrupt for device 0000:00:1f.2 disabled ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1f.5 to 64 ACPI: PCI interrupt for device 0000:00:1f.5 disabled pata_acpi 0000:03:00.1: enabling device (0000 -> 0001) ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:03:00.1 to 64 ACPI: PCI interrupt for device 0000:03:00.1 disabled usb 2-2: configuration #1 chosen from 1 choice hub 2-2:1.0: USB hub found hub 2-2:1.0: 2 ports detected usb 2-2: New USB device found, idVendor=0424, idProduct=2502 usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 6-1: new low speed USB device using uhci_hcd and address 2 usb 6-1: configuration #1 chosen from 1 choice hiddev96hidraw0: USB HID v1.00 Device [POWERCOM CO., LTD. USB to Serial] on usb-0000:00:1d.0-1 usb 6-1: New USB device found, idVendor=0d9f, idProduct=0002 usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1: Product: USB to Serial usb 6-1: Manufacturer: POWERCOM CO., LTD. usb 7-2: new low speed USB device using uhci_hcd and address 2 usb 7-2: configuration #1 chosen from 1 choice hiddev97hidraw1: USB HID v1.10 Device [T-wins ASUS DH Remote] on usb-0000:00:1d.1-2 usb 7-2: New USB device found, idVendor=0b05, idProduct=172e usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 7-2: Product: ASUS DH Remote usb 7-2: Manufacturer: T-wins usb 8-2: new low speed USB device using uhci_hcd and address 2 usb 8-2: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input4 input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-2 usb 8-2: New USB device found, idVendor=046d, idProduct=c00e usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 8-2: Product: USB-PS/2 Optical Mouse usb 8-2: Manufacturer: Logitech usb 2-2.1: new high speed USB device using ehci_hcd and address 6 usb 2-2.1: configuration #1 chosen from 1 choice usb 2-2.1: New USB device found, idVendor=03f0, idProduct=7704 usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-2.1: Product: Deskjet D4100 series usb 2-2.1: Manufacturer: HP usb 2-2.1: SerialNumber: TH644223Y304FP ata_piix 0000:00:1f.2: version 2.12 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 22 ata2: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 22 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.01: ATAPI: ASUS DRW-2014L1T, 1.00, max UDMA/66 ata1.00: configured for UDMA/133 ata1.01: configured for UDMA/66 ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-7: ST3500630AS, 3.AAD, max UDMA/133 ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 > sd 0:0:0:0: [sda] Attached SCSI disk scsi 0:0:1:0: CD-ROM ASUS DRW-2014L1T 1.00 PQ: 0 ANSI: 5 scsi 1:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:0:0: [sdb] Attached SCSI disk ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 22 (level, low) -> IRQ 22 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] PCI: Setting latency timer of device 0000:00:1f.5 to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22 ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: ASUS DRW-2014L1T, 1.00, max UDMA/66 ata3.00: configured for UDMA/66 ata4: SATA link down (SStatus 0 SControl 300) scsi 2:0:0:0: CD-ROM ASUS DRW-2014L1T 1.00 PQ: 0 ANSI: 5 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: sda2: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 1338325 EXT3-fs: sda2: 1 orphan inode deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1226002293.357:2): selinux=0 auid=4294967295 ses=4294967295 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:02:00.0 to 64 sky2 0000:02:00.0: v1.21 addr 0xf7efc000 irq 17 Yukon-EC Ultra (0xb4) rev 2 sky2 eth0: addr 00:1d:60:e0:58:ff ahci 0000:03:00.0: version 3.0 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16 udev: renamed network interface eth0 to eth2 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 0:0:1:0: Attached scsi generic sg1 type 5 sd 1:0:0:0: Attached scsi generic sg2 type 0 scsi 2:0:0:0: Attached scsi generic sg3 type 5 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) input: PC Speaker as /devices/platform/pcspkr/input/input5 Driver 'sr' needs updating - please use bus_type methods usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7704 usbcore: registered new interface driver usblp sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:1:0: Attached scsi CD-ROM sr0 sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray sr 2:0:0:0: Attached scsi CD-ROM sr1 nvidia: module license 'NVIDIA' taints kernel. ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part PCI: Setting latency timer of device 0000:03:00.0 to 64 scsi4 : ahci scsi5 : ahci ata5: SATA max UDMA/133 abar m8192@0xf7ffe000 port 0xf7ffe100 irq 16 ata6: SATA max UDMA/133 abar m8192@0xf7ffe000 port 0xf7ffe180 irq 16 ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:03:00.1 to 64 scsi6 : pata_jmicron scsi7 : pata_jmicron ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17 ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17 r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 16 eth0: RTL8169sc/8110sc at 0xffffc20000646c00, 00:1d:60:e2:40:a1, XID 18000000 IRQ 16 ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 19 (level, low) -> IRQ 19 udev: renamed network interface eth0 to eth3 firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI version 1.0 ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.80 Wed Oct 1 14:43:46 PDT 2008 firewire_core: created device fw0: GUID 0011d800018e5a67, S400 NET: Registered protocol family 10 lo: Disabled Privacy Extensions device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda2, internal journal fuse init (API version 7.9) kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Adding 2104504k swap on /dev/sda3. Priority:-1 extents:1 across:2104504k firmware: requesting intel-ucode/06-17-06 firmware: requesting intel-ucode/06-17-06 IA-32 Microcode Update Driver: v1.14a RPC: Registered udp transport module. RPC: Registered tcp transport module. warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure. w83627ehf: Found W83627DHG chip at 0x290 coretemp coretemp.0: Using relative temperature scale! coretemp coretemp.1: Using relative temperature scale! Loading iSCSI transport class v2.0-869. iscsi: registered transport (tcp) iscsi: registered transport (iser) Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: BNEP (Ethernet Emulation) ver 1.2 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period sky2 eth2: enabling interface ADDRCONF(NETDEV_UP): eth2: link is not ready sky2 eth2: Link is up at 100 Mbps, full duplex, flow control rx ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready eth2: no IPv6 routers present BUG: unable to handle kernel paging request at 0000000000090103 IP: [<0000000000090103>] PGD 11289e067 PUD 1129bb067 PMD 11242d067 PTE 0 Oops: 0010 [1] SMP CPU 1 Modules linked in: nfsd lockd nfs_acl auth_rpcgss exportfs bridge bnep rfcomm l2cap bluetooth ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi scsi_transport_iscsi coretemp w83627ehf hwmon_vid hwmon sunrpc fuse dm_mirror dm_log dm_multipath dm_mod ipv6 ctxfi snd_seq_dummy nvidia(P) usblp sr_mod cdrom pcspkr snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer firewire_ohci firewire_core iTCO_wdt iTCO_vendor_support i2c_i801 snd soundcore r8169 sg pata_jmicron snd_page_alloc i2c_core ahci sky2 crc_itu_t floppy ata_generic ata_piix pata_acpi libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: freq_table] Pid: 2895, comm: gnome-sound-pro Tainted: P 2.6.26.6-79.fc9.x86_64 #1 RIP: 0010:[<0000000000090103>] [<0000000000090103>] RSP: 0018:ffff81011299bb70 EFLAGS: 00010206 RAX: 0000000000090103 RBX: ffff810112246400 RCX: 00000000ffffffea RDX: 00000000ffffffea RSI: ffff81011299bb68 RDI: ffff810112246400 RBP: ffff81011299bb88 R08: 0000000000000000 R09: ffff81011299bcd0 R10: 00000000000094ca R11: 0000000000000002 R12: ffff81012e583a00 R13: ffff81011f9a3b50 R14: ffff81011299bc38 R15: ffff81012e583e00 FS: 00007f267aad17f0(0000) GS:ffff81012fc04880(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000090103 CR3: 00000001129fc000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process gnome-sound-pro (pid: 2895, threadinfo ffff81011299a000, task ffff810117de96a0) Stack: ffffffffa0161690 ffff81012e583a00 ffff81011299bcd0 ffff81011299bba8 ffffffffa0164ad4 0000000000000000 00000000ffffffea ffff81011299bbd8 ffffffffa01653c3 0000000000e00003 ffff81012e583a00 0000000000000002 Call Trace: [] ? :snd_pcm:snd_pcm_detach_substream+0x22/0x71 [] :snd_pcm:snd_pcm_release_substream+0x79/0x7d [] :snd_pcm:snd_pcm_open_substream+0x7d/0x88 [] :snd_pcm_oss:snd_pcm_oss_open+0x275/0x493 [] ? default_wake_function+0x0/0xf [] ? kobject_get+0x1a/0x22 [] ? cdev_get+0x34/0x4c [] :soundcore:soundcore_open+0x171/0x1e4 [] ? exact_match+0x0/0x9 [] chrdev_open+0x134/0x158 [] ? devcgroup_inode_permission+0x61/0x129 [] ? chrdev_open+0x0/0x158 [] __dentry_open+0x13a/0x249 [] nameidata_to_filp+0x2e/0x40 [] do_filp_open+0x40e/0x8ba [] ? ktime_get_ts+0x49/0x4e [] ? __switch_to+0x388/0x39a [] ? hrtick_set+0x8b/0xfc [] ? __strncpy_from_user+0x2c/0x53 [] ? get_unused_fd_flags+0x8b/0x11f [] do_sys_open+0x51/0xd1 [] sys_open+0x1b/0x1d [] tracesys+0xd0/0xd5 Code: Bad RIP value. RIP [<0000000000090103>] RSP CR2: 0000000000090103 ---[ end trace 2d7b1049c5031d40 ]---