;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit
;autogenrated on 2008-11-07
;Dahdi Channels Configurations 
;For detailed Dahdi options, view /etc/asterisk/chan_dahdi.conf.bak

[trunkgroups]

[channels]
context=default
usecallerid=yes
hidecallerid=no
callwaiting=no
usecallingpres=yes
callwaitingcallerid=no
threewaycalling=no
transfer=yes
canpark=yes
cancallforward=no
callreturn=no
echocancel=yes
echocancelwhenbridged=no
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
resetinterval=never
callerid=asreceived
cidsignalling=bell
cidstart=ring

;Sangoma A104 port 1 [slot:4 bus:7 span:1] <wanpipe1>
switchtype=national
context=from-pri
group=0
signalling=pri_cpe
channel =>1-23

;Sangoma A104 port 2 [slot:4 bus:7 span:2] <wanpipe2>
switchtype=national
context=from-pbx
group=1
signalling=pri_net
facilityenable=yes
channel =>25-47

;Sangoma A104 port 3 [slot:4 bus:7 span:3] <wanpipe3>
;
; The first eight ports will be the Iwatsu voicemail ports.
;
context=from-pbx-voicemail
group=2
signalling=fxs_gs
accountcode=VM
channel =>49-56
;
; The next eight ports are on the second FXO card
; 
context=from-pstn-pots
group=3
signalling=fxs_gs
rxgain=2.0
txgain=2.0
accountcode=PSTNPOTS
channel =>57-58
;channel =>57-64

;
; The next eight ports are on the first FXS card
;
context=from-pbx-pots
group=4
signalling=fxo_ls
rxgain=2.0
txgain=2.0
accountcode=PBXPOTS
channel =>65,66
;channel =>65-72


--- and the associated context
[from-pstn-pots]

;
; Although it seemed to be a good idea to route POTS calls to analog
; ports on the Iwatsu, it's been nothing but a royal PITA.  Thus, I'm
; going to use the analog ports as a last resort.
;

;
; Wait for two rings so that when calls are transfered to ${ANSWERINGSVC}
; we don't bother our PBX and then bridge the calls.
;
exten => s,1,Wait(1);
exten => s,n,WaitForRing(0)
exten => s,n,WaitForRing(0)
exten => s,n,Answer();
exten => s,n,Verbose(4, Context: ${CONTEXT} * Channel: ${CHANNEL} * Callerid: ${CALLERID(all)} * CallerID(num): ${CALLERID(num)} * CallerID(name): ${CALLERID(name)});

exten => s,n,Dial(DAHDI/${PBX}/2652)            ; Bridge to T1
exten => s,n,Dial(DAHDI/${PBX_ANALOG})          ; Fallback to the analog lines