# /etc/X11/xorg.conf Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Touchpad" "AlwaysCore" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/usr/share/X11/rgb" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/75dpi" FontPath "/usr/share/fonts/100dpi" FontPath "/usr/share/fonts/TTF" FontPath "/usr/share/fonts/Type1" EndSection Section "Module" Load "glx" Load "glx" Load "extmod" Load "dbe" Load "record" Load "xtrap" Load "dri" Load "freetype" Load "type1" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Driver "synaptics" Identifier "Touchpad" Option "Device" "/dev/input/mouse1" Option "Protocol" "auto-dev" Option "LeftEdge" "1700" Option "RightEdge" "5100" Option "TopEdge" "1700" Option "BottomEdge" "4200" Option "FingerLow" "25" Option "FingerHigh" "30" Option "MaxTapTime" "180" Option "MaxTapMove" "220" Option "VertScrollDelta" "100" Option "MinSpeed" "0.18" Option "MaxSpeed" "0.36" Option "AccelFactor" "0.0015" Option "SHMConfig" "on" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" Option "Emulate3Buttons" "on" EndSection Section "Monitor" #DisplaySize 290 210 # mm Identifier "Monitor0" VendorName "QDS" ModelName "5" Option "DPMS" "true" EndSection Section "Device" ### Available Driver options are:- ### Values: : integer, : float, : "True"/"False", ### : "String", : " Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [] #Option "SWcursor" # [] #Option "ColorKey" # #Option "CacheLines" # #Option "Dac6Bit" # [] #Option "DRI" # [] #Option "NoDDC" # [] #Option "ShowCache" # [] #Option "XvMCSurfaces" # #Option "PageFlip" # [] Identifier "Card0" Driver "i810" VendorName "Intel Corporation" BoardName "82852/855GM Integrated Graphics Device" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection # dmesg: Linux version 2.6.17-gentoo-r4 (root@thorn) (gcc version 3.4.6 (Gentoo 3.4.6-r1, ssp-3.4.5-1.0, pie-8.7.9)) #5 Thu Aug 10 23:30:59 CDT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000001fec9000 (usable) BIOS-e820: 000000001fec9000 - 0000000020000000 (reserved) BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 510MB LOWMEM available. On node 0 totalpages: 130761 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 126665 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v000 DELL ) @ 0x000fdf00 ACPI: RSDT (v001 DELL CPi R 0x27d50605 ASL 0x00000061) @ 0x1fef0000 ACPI: FADT (v001 DELL CPi R 0x27d50605 ASL 0x00000061) @ 0x1fef0400 ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 Allocating PCI resources starting at 30000000 (gap: 20000000:dec10000) Built 1 zonelists Kernel command line: root=/dev/hdc7 Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (01402000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c04df000 soft=c04de000 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 2598.204 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 513764k/523044k available (2623k kernel code, 8760k reserved, 1128k data, 184k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5198.70 BogoMIPS (lpj=2599352) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 128K CPU: After all inits, caps: bfebf9ff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled CPU: Intel(R) Celeron(R) CPU 2.60GHz stepping 09 Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 0k freed ACPI: setting ELCR to 0200 (from 0800) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfcfae, last bus=2 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Boot video device is 0000:00:02.0 PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0880-08bf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11 ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:02: ioport range 0x800-0x805 could not be reserved pnp: 00:02: ioport range 0x808-0x80f could not be reserved pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved pnp: 00:03: ioport range 0x806-0x807 has been reserved pnp: 00:03: ioport range 0x810-0x85f could not be reserved pnp: 00:03: ioport range 0x860-0x87f has been reserved pnp: 00:03: ioport range 0x880-0x8bf has been reserved pnp: 00:03: ioport range 0x8c0-0x8df has been reserved pnp: 00:08: ioport range 0x900-0x97f has been reserved pnp: 00:0b: ioport range 0x7b0-0x7bb has been reserved pnp: 00:0b: ioport range 0x7c0-0x7df has been reserved pnp: 00:0b: ioport range 0xbb0-0xbbb has been reserved pnp: 00:0b: ioport range 0xbc0-0xbdf has been reserved pnp: 00:0b: ioport range 0xfb0-0xfbb has been reserved pnp: 00:0b: ioport range 0xfc0-0xfdf has been reserved pnp: 00:0b: ioport range 0x13b0-0x13bb has been reserved pnp: 00:0b: ioport range 0x13c0-0x13df has been reserved PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bus 3, cardbus bridge: 0000:02:04.0 IO window: 0000d000-0000d0ff IO window: 0000d400-0000d4ff PREFETCH window: 30000000-31ffffff MEM window: f8000000-f9ffffff PCI: Bridge: 0000:00:1e.0 IO window: d000-efff MEM window: f8000000-fdffffff PREFETCH window: 30000000-32ffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 PCI: Enabling device 0000:02:04.0 (0000 -> 0003) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered Machine check exception polling timer started. apm: BIOS not found. squashfs: version 3.0 (2006/03/15) Phillip Lougher Initializing Cryptographic API io scheduler noop registered io scheduler cfq registered (default) lp: driver loaded but no devices found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 855 Chipset. agpgart: Detected 892K stolen memory. agpgart: AGP aperture is 128M @ 0xe8000000 [drm] Initialized drm 1.0.1 20051102 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [drm] Initialized i915 1.4.0 20060119 on minor 0 [drm] Initialized i915 1.4.0 20060119 on minor 1 vesafb: Intel Corporation, Intel(r)852GM/852GME/855GM/855GME Graphics Controller, Hardware Version 0.0 (OEM: Intel(r)852GM/852GME/855GM/855GME Graphics Chip Accelerated VGA BIOS) vesafb: VBE version: 3.0 vesafb: VBIOS/hardware supports DDC2 transfers vesafb: monitor limits: vf = 60 Hz, hf = 48 kHz, clk = 65 MHz vesafb: scrolling: redraw Console: switching to colour frame buffer device 128x48 vesafb: framebuffer at 0xe8000000, mapped to 0xe0980000, using 832k, total 832k fb0: VESA VGA frame buffer device ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Lid Switch [LID] ACPI: Power Button (CM) [PBTN] ACPI: Sleep Button (CM) [SBTN] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THM] (65 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM chipsets intelfb: Version 0.9.2 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 intelfb: Cannot reserve FB region. Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7 PCI: setting IRQ 7 as level-triggered ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 7 (level, low) -> IRQ 7 ACPI: PCI interrupt for device 0000:00:1f.6 disabled PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Warning: Keylock active. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) b44.c:v1.00 (Apr 7, 2006) ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKB] -> GSI 7 (level, low) -> IRQ 7 eth0: Broadcom 4400 10/100BaseT Ethernet 00:11:43:5e:2a:5f Linux video capture interface: v1.00 saa7130/34: v4l2 driver version 0.2.14 loaded Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... input: AT Translated Set 2 keyboard as /class/input/input0 Synaptics Touchpad, model: 1, fw: 5.9, id: 0x256eb1, caps: 0x804713/0x0 input: SynPS/2 Synaptics TouchPad as /class/input/input1 hda: TEAC DVD-ROM DV-28E-C, ATAPI CD/DVD-ROM drive Probing IDE interface ide1... hdc: FUJITSU MHT2030AT, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hdc: max request size: 128KiB hdc: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=58140/16/63 hdc: cache flushes supported hdc: hdc2 hdc3 hdc4 < hdc5 hdc6 hdc7 hdc8 hdc9 > hda: ATAPI 24X DVD-ROM drive, 256kB Cache Uniform CD-ROM driver Revision: 3.20 video1394: Installed video1394 module ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:02:04.0 [1028:017f] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:04.0, mfunc 0x00001002, devctl 0x64 Yenta: ISA IRQ mask 0x0478, PCI irq 11 Socket status: 30000007 pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff cs: IO port probe 0xd000-0xefff: clean. pcmcia: parent PCI bridge Memory window: 0xf8000000 - 0xfdffffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x32ffffff ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf6effc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver usbcore: registered new driver wacom drivers/usb/input/wacom.c: v1.45:USB Wacom Graphire and Wacom Intuos tablet driver i2c /dev entries driver Advanced Linux Sound Architecture Driver Version 1.0.11rc4 (Wed Mar 22 10:27:24 2006 UTC). ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 7 (level, low) -> IRQ 7 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 50322 usecs intel8x0: clocking to 48000 ALSA device list: #0: Intel 82801DB-ICH4 with STAC9750,51 at 0xf6eff800, irq 7 ip_conntrack version 2.4 (4086 buckets, 32688 max) - 204 bytes per conntrack ip_tables: (C) 2000-2006 Netfilter Core Team ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.5 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.7 Bluetooth: BNEP (Ethernet Emulation) ver 1.2 Bluetooth: BNEP filters: protocol multicast Bluetooth: HIDP (Human Interface Emulation) ver 1.1 Using IPI Shortcut mode ACPI wakeup devices: LID PBTN PCI0 USB0 USB1 USB2 USB3 MODM PCIE ACPI: (supports S0 S1 S3 S4 S5) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 184k freed Adding 506008k swap on /dev/hdc6. Priority:-1 extents:1 across:506008k EXT3 FS on hdc7, internal journal ndiswrapper version 1.2 loaded (preempt=no,smp=no) ndiswrapper: driver bcmwl5 (Broadcom,02/17/2004, 3.40.65.0) loaded ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 ndiswrapper: using irq 11 wlan0: ndiswrapper ethernet device 00:0b:7d:0d:91:d7 using driver bcmwl5, configuration file 14E4:4320.5.conf wlan0: encryption modes supported: WEP, WPA with TKIP, WPA with AES/CCMP NTFS driver 2.1.27 [Flags: R/W MODULE]. kjournald starting. Commit interval 5 seconds EXT3 FS on hdc9, internal journal EXT3-fs: mounted filesystem with ordered data mode. wlan0 (WE) : Driver using old /proc/net/wireless support, please fix driver !