root@snowflake /etc/ppp/peers # cat megafongprs
/dev/rfcomm1 115200
connect '/usr/sbin/chat -v -f /etc/ppp/chat/megafongprs'
noauth
defaultroute
lock
debug
novjccomp
nopcomp
noaccomp
nodeflate
novj
nobsdcomp
default-asyncmap
ipcp-accept-local
ipcp-accept-remote
usepeerdns
user "gdata"
nodetach

root@snowflake /etc/ppp # cat chat/megafongprs
TIMEOUT 5
ECHO ON
ABORT '\nBUSY\r'
ABORT '\nERROR\r'
ABORT '\nNO ANSWER\r'
ABORT '\nNO CARRIER\r'
ABORT '\nNO DIALTONE\r'
ABORT '\nRINGING\r\n\r\nRINGING\r'
''              \rAT
TIMEOUT 12
OK      ATH
OK      ATE1
OK      AT+CGDCONT=1,"IP","internet.ltmsk"
OK      ATD*99***1#
CONNECT

root@snowflake /etc/ppp # cat chap-secrets
# Secrets for authentication using CHAP
# client        server  secret                  IP addresses
gdata   *       gdata   *


root@snowflake /etc/bluetooth # cat hcid.conf
#
# HCI daemon configuration file.
#
# $Id: hcid.conf,v 1.7 2004/12/13 14:16:03 holtmann Exp $
#

# HCId options
options {
        # Automatically initialize new devices
        autoinit yes;

        # Security Manager mode
        #   none - Security manager disabled
        #   auto - Use local PIN for incoming connections
        #   user - Always ask user for a PIN
        #
        security auto;

        # Pairing mode
        #   none  - Pairing disabled
        #   multi - Allow pairing with already paired devices
        #   once  - Pair once and deny successive attempts
        pairing multi;

        # PIN helper
        pin_helper /usr/bin/bluepin;

        # D-Bus PIN helper
        #dbus_pin_helper;
}

# Default settings for HCI devices
device {
        # Local device name
        #   %d - device id
        #   %h - host name
        name "BlueZ (%d)";

        # Local device class
        class 0x100;

        # Default packet type
        #pkt_type DH1,DM1,HV1;

        # Inquiry and Page scan
        iscan enable; pscan enable;

        # Default link mode
        #   none   - no specific policy
        #   accept - always accept incoming connections
        #   master - become master on incoming connections,
        #            deny role switch on outgoing connections
        lm accept;

        # Default link policy
        #   none    - no specific policy
        #   rswitch - allow role switch
        #   hold    - allow hold mode
        #   sniff   - allow sniff mode
        #   park    - allow park mode
        lp rswitch,hold,sniff,park;

        # Authentication and Encryption (Security Mode 3)
        #auth enable;
        #encrypt enable;
}

root@snowflake /etc/bluetooth # cat rfcomm.conf
#
# RFCOMM configuration file.
#
# $Id: rfcomm.conf,v 1.1 2002/10/07 05:58:18 maxk Exp $
#

rfcomm0 {
        # Automatically bind the device at startup
        bind yes;

        # Bluetooth address of the device
        device 00:07:E0:4E:11:34;

        # RFCOMM channel for the connection
        channel 1;

        # Description of the connection
        comment "T5";
}

rfcomm1 {
        bind yes;
        device 00:0F:DE:C2:26:E9;
        channel 1;
        comment "k700";
}