cat /proc/cpuinfo:
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 28
model name	: Intel(R) Atom(TM) CPU  330   @ 1.60GHz
stepping	: 2
cpu MHz		: 1596.096
cache size	: 512 KB
physical id	: 0
siblings	: 4
core id		: 0
cpu cores	: 2
apicid		: 0
initial apicid	: 0
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl tm2 ssse3 cx16 xtpr lahf_lm
bogomips	: 3194.81
clflush size	: 64
power management:

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 28
model name	: Intel(R) Atom(TM) CPU  330   @ 1.60GHz
stepping	: 2
cpu MHz		: 1596.096
cache size	: 512 KB
physical id	: 0
siblings	: 4
core id		: 1
cpu cores	: 2
apicid		: 2
initial apicid	: 2
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl tm2 ssse3 cx16 xtpr lahf_lm
bogomips	: 2769.42
clflush size	: 64
power management:

processor	: 2
vendor_id	: GenuineIntel
cpu family	: 6
model		: 28
model name	: Intel(R) Atom(TM) CPU  330   @ 1.60GHz
stepping	: 2
cpu MHz		: 1596.096
cache size	: 512 KB
physical id	: 0
siblings	: 4
core id		: 0
cpu cores	: 2
apicid		: 1
initial apicid	: 1
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl tm2 ssse3 cx16 xtpr lahf_lm
bogomips	: 3192.25
clflush size	: 64
power management:

processor	: 3
vendor_id	: GenuineIntel
cpu family	: 6
model		: 28
model name	: Intel(R) Atom(TM) CPU  330   @ 1.60GHz
stepping	: 2
cpu MHz		: 1596.096
cache size	: 512 KB
physical id	: 0
siblings	: 4
core id		: 1
cpu cores	: 2
apicid		: 3
initial apicid	: 3
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl tm2 ssse3 cx16 xtpr lahf_lm
bogomips	: 3192.27
clflush size	: 64
power management:

lspci -m:

00:00.0 "Host bridge" "Intel Corporation" "82945G/GZ/P/PL Memory Controller Hub" -r02 "Intel Corporation" "Device 464c"
00:02.0 "VGA compatible controller" "Intel Corporation" "82945G/GZ Integrated Graphics Controller" -r02 "Intel Corporation" "Device 464c"
00:1b.0 "Audio device" "Intel Corporation" "82801G (ICH7 Family) High Definition Audio Controller" -r01 "Intel Corporation" "Device d604"
00:1c.0 "PCI bridge" "Intel Corporation" "82801G (ICH7 Family) PCI Express Port 1" -r01 "" ""
00:1c.2 "PCI bridge" "Intel Corporation" "82801G (ICH7 Family) PCI Express Port 3" -r01 "" ""
00:1c.3 "PCI bridge" "Intel Corporation" "82801G (ICH7 Family) PCI Express Port 4" -r01 "" ""
00:1d.0 "USB Controller" "Intel Corporation" "82801G (ICH7 Family) USB UHCI Controller #1" -r01 "Intel Corporation" "Device 464c"
00:1d.1 "USB Controller" "Intel Corporation" "82801G (ICH7 Family) USB UHCI Controller #2" -r01 "Intel Corporation" "Device 464c"
00:1d.2 "USB Controller" "Intel Corporation" "82801G (ICH7 Family) USB UHCI Controller #3" -r01 "Intel Corporation" "Device 464c"
00:1d.3 "USB Controller" "Intel Corporation" "82801G (ICH7 Family) USB UHCI Controller #4" -r01 "Intel Corporation" "Device 464c"
00:1d.7 "USB Controller" "Intel Corporation" "82801G (ICH7 Family) USB2 EHCI Controller" -r01 -p20 "Intel Corporation" "Device 464c"
00:1e.0 "PCI bridge" "Intel Corporation" "82801 PCI Bridge" -re1 -p01 "" ""
00:1f.0 "ISA bridge" "Intel Corporation" "82801GB/GR (ICH7 Family) LPC Interface Bridge" -r01 "Intel Corporation" "Device 464c"
00:1f.1 "IDE interface" "Intel Corporation" "82801G (ICH7 Family) IDE Controller" -r01 -p8a "Intel Corporation" "Device 464c"
00:1f.2 "IDE interface" "Intel Corporation" "82801GB/GR/GH (ICH7 Family) SATA IDE Controller" -r01 -p8f "Intel Corporation" "Device 464c"
00:1f.3 "SMBus" "Intel Corporation" "82801G (ICH7 Family) SMBus Controller" -r01 "Intel Corporation" "Device 464c"
01:00.0 "Ethernet controller" "Realtek Semiconductor Co., Ltd." "RTL8111/8168B PCI Express Gigabit Ethernet controller" -r02 "Unknown vendor 8680" "Device 0100"

sensors:
smsc47m192-i2c-0-2d
Adapter: SMBus I801 adapter at 2000
+2.5V:     +2.53 V  (min =  +0.00 V, max =  +3.32 V)   
VCore:     +1.15 V  (min =  +0.00 V, max =  +2.99 V)   
+3.3V:     +3.23 V  (min =  +0.00 V, max =  +4.38 V)   
+5V:       +5.03 V  (min =  +0.00 V, max =  +6.64 V)   
+12V:     +12.19 V  (min =  +0.00 V, max = +15.94 V)   
VCC:       +3.25 V  (min =  +0.00 V, max =  +4.38 V)   
+1.5V:     +1.56 V  (min =  +0.00 V, max =  +1.99 V)   
+1.8V:     +1.77 V  (min =  +0.00 V, max =  +2.39 V)   
Chip Temp: +40.0C  (low  =  -127C, high =  +127C)  
CPU Temp:  +46.0C  (low  =  -127C, high =  +127C)  
Sys Temp:  +42.0C  (low  =  -127C, high =  +127C)  
vid:      +2.050 V  (VRM Version 8.2)

smsc47m1-isa-0680
Adapter: ISA adapter
fan1:        0 RPM  (min = 1280 RPM, div = 4)          ALARM
fan2:     5851 RPM  (min = 1280 RPM, div = 4)          

uname -a:
Linux router 2.6.26-gentoo-r3 #1 SMP Fri Dec 5 13:58:02 CET 2008 i686 Intel(R) Atom(TM) CPU 330 @ 1.60GHz GenuineIntel GNU/Linux
uptime:
14:54:48 up 9 days, 50 min,  2 users,  load average: 0.00, 0.00, 0.00

dmesg:
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Linux version 2.6.26-gentoo-r3 (root@router) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #1 SMP Fri Dec 5 13:58:02 CET 2008
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[    0.000000]  BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003f533000 (usable)
[    0.000000]  BIOS-e820: 000000003f533000 - 000000003f53b000 (reserved)
[    0.000000]  BIOS-e820: 000000003f53b000 - 000000003f5cb000 (usable)
[    0.000000]  BIOS-e820: 000000003f5cb000 - 000000003f5cf000 (reserved)
[    0.000000]  BIOS-e820: 000000003f5cf000 - 000000003f660000 (usable)
[    0.000000]  BIOS-e820: 000000003f660000 - 000000003f6f0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f6f0000 - 000000003f6f3000 (usable)
[    0.000000]  BIOS-e820: 000000003f6f3000 - 000000003f6ff000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003f6ff000 - 000000003f700000 (usable)
[    0.000000]  BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 0000000100000000 (reserved)
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] 119MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at [c00fe200] 000fe200
[    0.000000] Entering add_active_range(0, 0, 259840) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   259840
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   259840
[    0.000000] On node 0 totalpages: 259840
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 238 pages used for memmap
[    0.000000]   HighMem zone: 30226 pages, LIFO batch:7
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL )
[    0.000000] ACPI: RSDT 3F6FD038, 0038 (r1 INTEL  D945GLF2       63       1000013)
[    0.000000] ACPI: FACP 3F6FC000, 0074 (r1 INTEL  D945GLF2       63 MSFT  1000013)
[    0.000000] ACPI: DSDT 3F6F7000, 4787 (r1 INTEL  D945GLF2       63 MSFT  1000013)
[    0.000000] ACPI: FACS 3F6A3000, 0040
[    0.000000] ACPI: APIC 3F6F6000, 0078 (r1 INTEL  D945GLF2       63 MSFT  1000013)
[    0.000000] ACPI: WDDT 3F6F5000, 0040 (r1 INTEL  D945GLF2       63 MSFT  1000013)
[    0.000000] ACPI: MCFG 3F6F4000, 003C (r1 INTEL  D945GLF2       63 MSFT  1000013)
[    0.000000] ACPI: ASF! 3F6F3000, 00A6 (r32 INTEL  D945GLF2       63 MSFT  1000013)
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
[    0.000000] PERCPU: Allocating 37544 bytes of per cpu data
[    0.000000] NR_CPUS: 4, nr_cpu_ids: 4
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257810
[    0.000000] Kernel command line: root=/dev/sda3 video=uvesafb:1024x768-32,mtrr:3,ywrap
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] CPU 0 irqstacks, hard=c045d000 soft=c0459000
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1596.096 MHz processor.
[    0.010000] Console: colour VGA+ 80x25
[    0.010000] console [tty0] enabled
[    0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.010000] Memory: 1019264k/1039360k available (2195k kernel code, 18568k reserved, 928k data, 268k init, 121184k highmem)
[    0.010000] virtual kernel memory layout:
[    0.010000]     fixmap  : 0xfff81000 - 0xfffff000   ( 504 kB)
[    0.010000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.010000]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[    0.010000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[    0.010000]       .init : 0xc0413000 - 0xc0456000   ( 268 kB)
[    0.010000]       .data : 0xc0324ede - 0xc040d220   ( 928 kB)
[    0.010000]       .text : 0xc0100000 - 0xc0324ede   (2195 kB)
[    0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.010000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.160082] Calibrating delay using timer specific routine.. 3194.81 BogoMIPS (lpj=15974068)
[    0.160235] Security Framework initialized
[    0.160284] Capability LSM initialized
[    0.160354] Mount-cache hash table entries: 512
[    0.160633] Initializing cgroup subsys ns
[    0.160684] Initializing cgroup subsys cpuacct
[    0.160762] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.160832] CPU: L2 cache: 512K
[    0.160873] CPU: Physical Processor ID: 0
[    0.160915] CPU: Processor Core ID: 0
[    0.160958] Intel machine check architecture supported.
[    0.161006] Intel machine check reporting enabled on CPU#0.
[    0.161051] using mwait in idle threads.
[    0.161106] Checking 'hlt' instruction... OK.
[    0.200351] Freeing SMP alternatives: 12k freed
[    0.200396] ACPI: Core revision 20080321
[    0.212789] ENABLING IO-APIC IRQs
[    0.213035] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.313147] CPU0: Intel(R) Atom(TM) CPU  330   @ 1.60GHz stepping 02
[    0.320000] CPU 1 irqstacks, hard=c045e000 soft=c045a000
[    0.320000] Booting processor 1/2 ip 2000
[    0.330000] Initializing CPU#1
[    0.330000] Calibrating delay using timer specific routine.. 2769.42 BogoMIPS (lpj=13847114)
[    0.330000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.330000] CPU: L2 cache: 512K
[    0.330000] CPU: Physical Processor ID: 0
[    0.330000] CPU: Processor Core ID: 1
[    0.330000] Intel machine check architecture supported.
[    0.330000] Intel machine check reporting enabled on CPU#1.
[    0.330000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[    0.475299] CPU1: Intel(R) Atom(TM) CPU  330   @ 1.60GHz stepping 02
[    0.475771] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.490000] CPU 2 irqstacks, hard=c045f000 soft=c045b000
[    0.490000] Booting processor 2/1 ip 2000
[    0.500000] Initializing CPU#2
[    0.500000] Calibrating delay using timer specific routine.. 3192.25 BogoMIPS (lpj=15961250)
[    0.500000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.500000] CPU: L2 cache: 512K
[    0.500000] CPU: Physical Processor ID: 0
[    0.500000] CPU: Processor Core ID: 0
[    0.500000] Intel machine check architecture supported.
[    0.500000] Intel machine check reporting enabled on CPU#2.
[    0.500000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[    0.650000] CPU2: Intel(R) Atom(TM) CPU  330   @ 1.60GHz stepping 02
[    0.650000] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[    0.660000] CPU 3 irqstacks, hard=c0460000 soft=c045c000
[    0.660000] Booting processor 3/3 ip 2000
[    0.670000] Initializing CPU#3
[    0.670000] Calibrating delay using timer specific routine.. 3192.27 BogoMIPS (lpj=15961370)
[    0.670000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.670000] CPU: L2 cache: 512K
[    0.670000] CPU: Physical Processor ID: 0
[    0.670000] CPU: Processor Core ID: 1
[    0.670000] Intel machine check architecture supported.
[    0.670000] Intel machine check reporting enabled on CPU#3.
[    0.670000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[    0.817994] CPU3: Intel(R) Atom(TM) CPU  330   @ 1.60GHz stepping 02
[    0.818468] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[    0.830000] Brought up 4 CPUs
[    0.830000] Total of 4 processors activated (12348.76 BogoMIPS).
[    0.830000] CPU0 attaching sched-domain:
[    0.830000]  domain 0: span 0,2
[    0.830000]   groups: 0 2
[    0.830000]   domain 1: span 0-3
[    0.830000]    groups: 0,2 1,3
[    0.830000] CPU1 attaching sched-domain:
[    0.830000]  domain 0: span 1,3
[    0.830000]   groups: 1 3
[    0.830000]   domain 1: span 0-3
[    0.830000]    groups: 1,3 0,2
[    0.830000] CPU2 attaching sched-domain:
[    0.830000]  domain 0: span 0,2
[    0.830000]   groups: 2 0
[    0.830000]   domain 1: span 0-3
[    0.830000]    groups: 0,2 1,3
[    0.830000] CPU3 attaching sched-domain:
[    0.830000]  domain 0: span 1,3
[    0.830000]   groups: 3 1
[    0.830000]   domain 1: span 0-3
[    0.830000]    groups: 1,3 0,2
[    0.830000] net_namespace: 500 bytes
[    0.830000] NET: Registered protocol family 16
[    0.830000] No dock devices found.
[    0.830000] ACPI: bus type pci registered
[    0.830000] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support.
[    0.830000] PCI: Using configuration type 1 for base access
[    0.830000] Setting up standard PCI resources
[    0.846216] ACPI: EC: Look up EC in DSDT
[    0.851512] ACPI: Interpreter enabled
[    0.851560] ACPI: (supports S0 S5)
[    0.851658] ACPI: Using IOAPIC for interrupt routing
[    0.876216] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.876216] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.876216] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[    0.876216] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[    0.876730] PCI: Transparent bridge - 0000:00:1e.0
[    0.876810] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.877436] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[    0.878130] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.878365] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[    0.878594] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[    0.886216] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.886708] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.887238] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
[    0.887714] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.888184] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.888717] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.889252] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[    0.889724] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
[    0.895268] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.896216] pnp: PnP ACPI init
[    0.896216] ACPI: bus type pnp registered
[    0.896216] pnp: PnP ACPI: found 11 devices
[    0.896216] ACPI: ACPI bus type pnp unregistered
[    0.906216] SCSI subsystem initialized
[    0.906216] libata version 3.00 loaded.
[    0.906216] PCI: Using ACPI for IRQ routing
[    0.916216] hpet clockevent registered
[    0.916216] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.916216] hpet0: 3 64-bit timers, 14318180 Hz
[    0.916216] ACPI: RTC can wake from S4
[    0.945081] system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
[    0.945853] system 00:01: iomem range 0xfed13000-0xfed13fff could not be reserved
[    0.945914] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[    0.945975] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[    0.946036] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[    0.946096] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[    0.946157] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
[    0.946218] system 00:01: iomem range 0xfed45000-0xfed99fff could not be reserved
[    0.946278] system 00:01: iomem range 0xc0000-0xdffff could not be reserved
[    0.946328] system 00:01: iomem range 0xe0000-0xfffff could not be reserved
[    0.946391] system 00:06: ioport range 0x500-0x53f has been reserved
[    0.946442] system 00:06: ioport range 0x400-0x47f has been reserved
[    0.946491] system 00:06: ioport range 0x680-0x6ff has been reserved
[    0.980942] PCI: Bridge: 0000:00:1c.0
[    0.980942]   IO window: 1000-1fff
[    0.980942]   MEM window: 0x48100000-0x481fffff
[    0.980942]   PREFETCH window: 0x0000000048000000-0x00000000480fffff
[    0.980942] PCI: Bridge: 0000:00:1c.2
[    0.980942]   IO window: disabled.
[    0.980942]   MEM window: disabled.
[    0.980942]   PREFETCH window: disabled.
[    0.980942] PCI: Bridge: 0000:00:1c.3
[    0.980942]   IO window: disabled.
[    0.980942]   MEM window: disabled.
[    0.980942]   PREFETCH window: disabled.
[    0.980942] PCI: Bridge: 0000:00:1e.0
[    0.980942]   IO window: disabled.
[    0.980942]   MEM window: disabled.
[    0.980942]   PREFETCH window: disabled.
[    0.980942] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[    0.980942] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.980942] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[    0.980942] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    0.980942] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[    0.980942] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[    0.980942] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.980942] NET: Registered protocol family 2
[    1.017952] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.018535] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.019476] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    1.019987] TCP: Hash tables configured (established 131072 bind 65536)
[    1.020038] TCP reno registered
[    1.028023] NET: Registered protocol family 1
[    1.028928] checking if image is initramfs... it is
[    1.421988] Switched to high resolution mode on CPU 3
[    1.425055] Switched to high resolution mode on CPU 1
[    1.429633] Switched to high resolution mode on CPU 2
[    1.431385] Switched to high resolution mode on CPU 0
[    1.803399] Freeing initrd memory: 5749k freed
[    1.813400] Machine check exception polling timer started.
[    1.813400] audit: initializing netlink socket (disabled)
[    1.813400] type=2000 audit(1228485848.760:1): initialized
[    1.817838] highmem bounce pool size: 64 pages
[    1.817838] Total HugeTLB memory allocated, 0
[    1.817838] VFS: Disk quotas dquot_6.5.1
[    1.817838] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.818077] msgmni has been set to 1766
[    1.827840] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    1.827840] io scheduler noop registered
[    1.827840] io scheduler anticipatory registered
[    1.827840] io scheduler deadline registered
[    1.827840] io scheduler cfq registered (default)
[    1.827840] pci 0000:00:02.0: Boot video device
[    1.827840] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    1.827840] assign_interrupt_mode Found MSI capability
[    1.827840] Allocate Port Service[0000:00:1c.0:pcie00]
[    1.827840] Allocate Port Service[0000:00:1c.0:pcie02]
[    1.827840] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    1.827840] assign_interrupt_mode Found MSI capability
[    1.827840] Allocate Port Service[0000:00:1c.2:pcie00]
[    1.827840] Allocate Port Service[0000:00:1c.2:pcie02]
[    1.827840] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[    1.827840] assign_interrupt_mode Found MSI capability
[    1.827840] Allocate Port Service[0000:00:1c.3:pcie00]
[    1.827840] Allocate Port Service[0000:00:1c.3:pcie02]
[    1.882898] intel_rng: Firmware space is locked read-only. If you can't or
[    1.882898] intel_rng: don't want to disable this in firmware setup, and if
[    1.882898] intel_rng: you are certain that your system has a functional
[    1.882898] intel_rng: RNG, try using the 'no_fwh_detect' option.
[    1.887846] uvesafb: Intel Corporation, Intel(r) 82945G Chipset Family Graphics Controller, Hardware Version 0.0, OEM: Intel(r) 82945G Chipset Family Graphics Chip Accelerated VGA BIOS, VBE v3.0
[    1.987840] uvesafb: VBIOS/hardware doesn't support DDC transfers
[    1.987840] uvesafb: no monitor limits have been set, default refresh rate will be used
[    1.987840] uvesafb: scrolling: redraw
[    2.887755] Console: switching to colour frame buffer device 128x48
[    2.897841] uvesafb: framebuffer at 0x40000000, mapped to 0xf8880000, using 8000k, total 8000k
[    2.897841] fb0: VESA VGA frame buffer device
[    2.897841] isapnp: Scanning for PnP cards...
[    3.211984] isapnp: No Plug & Play device found
[    3.212098] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    3.217436] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    3.218760] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    3.223800] brd: module loaded
[    3.223800] Uniform Multi-Platform E-IDE driver
[    3.223800] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    3.223800] ICH7: IDE controller (0x8086:0x27df rev 0x01) at  PCI slot 0000:00:1f.1
[    3.223800] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[    3.223800] ICH7: not 100% native mode: will probe irqs later
[    3.223800] ICH7: IDE port disabled
[    3.223800]     ide0: BM-DMA at 0x20b0-0x20b7
[    3.223800] Probing IDE interface ide0...
[    3.841993] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    3.843884] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[    3.843884] ide_generic: I/O resource 0x1F0-0x1F7 not free.
[    3.843884] ide_generic: I/O resource 0x170-0x177 not free.
[    3.843884] Loading iSCSI transport class v2.0-869.
[    3.843884] Driver 'sd' needs updating - please use bus_type methods
[    3.843884] Driver 'sr' needs updating - please use bus_type methods
[    3.843884] ata_piix 0000:00:1f.2: version 2.12
[    3.843884] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[    3.843884] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    3.846444] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    3.846445] scsi0 : ata_piix
[    3.846445] scsi1 : ata_piix
[    3.856359] ata1: SATA max UDMA/133 cmd 0x20c8 ctl 0x20ec bmdma 0x20a0 irq 19
[    3.856359] ata2: SATA max UDMA/133 cmd 0x20c0 ctl 0x20e8 bmdma 0x20a8 irq 19
[    4.045406] ata1.00: ATA-8: WDC WD5000AAKS-00A7B0, 01.03B01, max UDMA/133
[    4.047086] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    4.085387] ata1.00: configured for UDMA/133
[    4.264710] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
[    4.265708] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[    4.270435] sd 0:0:0:0: [sda] Write Protect is off
[    4.273687] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.273687] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.279691] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[    4.280514] sd 0:0:0:0: [sda] Write Protect is off
[    4.288214] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.288214] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.288220]  sda: sda1 sda2 sda3 sda4
[    4.314693] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.319151] PNP: No PS/2 controller found. Probing ports directly.
[    4.330534] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.330534] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.341636] mice: PS/2 mouse device common for all mice
[    4.679241] cpuidle: using governor ladder
[    4.688425] TCP cubic registered
[    4.690426] NET: Registered protocol family 17
[    4.700418] Starting balanced_irq
[    4.708788] Using IPI Shortcut mode
[    4.708788] registered taskstats version 1
[    4.713270] Freeing unused kernel memory: 268k freed
[    4.737916] ata1: soft resetting link
[    4.962300] ata1.00: configured for UDMA/133
[    4.962307] ata1: EH complete
[    4.962300] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[    4.962351] sd 0:0:0:0: [sda] Write Protect is off
[    4.962359] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.962437] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.466710] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.837377] usbcore: registered new interface driver usbfs
[    5.837377] usbcore: registered new interface driver hub
[    5.837377] usbcore: registered new device driver usb
[    5.845887] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[    5.845887] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    5.845887] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    5.845887] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    5.845887] ehci_hcd 0000:00:1d.7: debug port 1
[    5.845887] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    5.845887] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x482a4000
[    5.869028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    5.875870] usb usb1: configuration #1 chosen from 1 choice
[    5.875870] hub 1-0:1.0: USB hub found
[    5.875870] hub 1-0:1.0: 8 ports detected
[    6.055233] Initializing USB Mass Storage driver...
[    6.055233] usbcore: registered new interface driver usb-storage
[    6.055233] USB Mass Storage support registered.
[    6.085217] USB Universal Host Controller Interface driver v3.0
[    6.085217] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[    6.085217] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    6.085217] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    6.092010] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    6.092010] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080
[    6.097079] usb usb2: configuration #1 chosen from 1 choice
[    6.097079] hub 2-0:1.0: USB hub found
[    6.097079] hub 2-0:1.0: 2 ports detected
[    6.215289] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[    6.215289] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    6.215289] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    6.215289] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    6.215289] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
[    6.220254] usb usb3: configuration #1 chosen from 1 choice
[    6.220254] hub 3-0:1.0: USB hub found
[    6.220254] hub 3-0:1.0: 2 ports detected
[    6.330254] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    6.330254] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    6.330254] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    6.330254] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    6.330254] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
[    6.330254] usb usb4: configuration #1 chosen from 1 choice
[    6.330254] hub 4-0:1.0: USB hub found
[    6.330254] hub 4-0:1.0: 2 ports detected
[    6.460159] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[    6.460159] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    6.460159] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    6.460159] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    6.460159] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020
[    6.460159] usb usb5: configuration #1 chosen from 1 choice
[    6.460159] hub 5-0:1.0: USB hub found
[    6.460159] hub 5-0:1.0: 2 ports detected
[    6.633205] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.677380] usbcore: registered new interface driver hiddev
[    6.677380] usbcore: registered new interface driver usbhid
[    6.677380] usbhid: v2.6:USB HID core driver
[    6.725406] sl811: driver sl811-hcd, 19 May 2005
[    6.896616] RPC: Registered udp transport module.
[    6.896616] RPC: Registered tcp transport module.
[   10.109983] ReiserFS: sda3: found reiserfs format "3.6" with standard journal
[   10.110001] ReiserFS: sda3: using ordered data mode
[   10.110194] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   10.110194] ReiserFS: sda3: checking transaction log (sda3)
[   10.150749] ReiserFS: sda3: Using r5 hash to sort names
[   11.763961] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[   11.763961] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   11.763961] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   11.763961] eth0: RTL8168c/8111c at 0xf90c2000, 00:1c:c0:7f:54:65, XID 3c4000c0 IRQ 220
[   11.849498] iTCO_vendor_support: vendor-support=0
[   11.859504] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[   11.859504] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[   11.859504] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   11.912979] Linux agpgart interface v0.103
[   11.936734] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
[   11.952967] agpgart: Detected an Intel 945G Chipset.
[   11.952967] agpgart: Detected 8060K stolen memory.
[   11.962966] agpgart: AGP aperture is 128M @ 0x40000000
[   12.086214] input: PC Speaker as /class/input/input0
[   12.134696] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[   12.134696] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   12.164205] input: Power Button (FF) as /class/input/input1
[   12.200797] parport_pc 00:08: reported by Plug and Play ACPI
[   12.200797] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[   12.218183] ACPI: Power Button (FF) [PWRF]
[   12.220769] ACPI: ACPI0007:00 is registered as cooling_device0
[   12.220769] ACPI: ACPI0007:01 is registered as cooling_device1
[   12.220769] ACPI: ACPI0007:02 is registered as cooling_device2
[   12.220769] ACPI: ACPI0007:03 is registered as cooling_device3
[   12.220769] input: Sleep Button (CM) as /class/input/input2
[   12.230770] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
[   12.276354] ACPI: Sleep Button (CM) [SLPB]
[   12.328213] ppdev: user-space parallel port driver
[   13.872851] i2c-adapter i2c-0: found SMSC47M192 or compatible, version 2, stepping A0
[   13.970919] smsc47m1: Found SMSC LPC47M15x/LPC47M192/LPC47M997
[   13.993003] IMQ driver loaded successfully.
[   13.993003] 	Hooking IMQ after NAT on PREROUTING.
[   13.993003] 	Hooking IMQ before NAT on POSTROUTING.
[   14.176468] kjournald starting.  Commit interval 5 seconds
[   14.176468] EXT3 FS on sda4, internal journal
[   14.176468] EXT3-fs: mounted filesystem with ordered data mode.
[   14.267042] Adding 995988k swap on /dev/sda1.  Priority:-1 extents:1 across:995988k

hdparm -t /dev/sda:

/dev/sda:
 Timing buffered disk reads:  292 MB in  3.02 seconds =  96.78 MB/sec