zaptel.conf

span=1,1,0,ccs,hdb3,crc4
bchan=1-15
dchan=16
bchan=17-31
fxols=32-35
#May be old config from cvs head
loadzone=uk
defaultzone=uk

zapata.conf

trunkgroup=>1,16
spanmap=>1,1,1
[channels]
;
; Default language
;
language=en
;
; Default context
;
context=default
;
; Switchtype:  Only used for PRI.
;
; national:       National ISDN 2 (default)
; dms100:         Nortel DMS100
; 4ess:           AT&T 4ESS
; 5ess:           Lucent 5ESS
; euroisdn:       EuroISDN
; ni1:            Old National ISDN 1
; qsig:           Q.SIG
;
switchtype=euroisdn
;pridialplan=unknown
;
; PRI Local Dialplan:  Only RARELY used for PRI (sets the calling number's numbe
ring plan)
;
; unknown:        Unknown
; private:        Private ISDN
; local:          Local ISDN
; national:       National ISDN
; international:  International ISDN
;
prilocaldialplan=unknown
;
; PRI callerid prefixes based on the given TON/NPI (dialplan)
; This is especially needed for euroisdn E1-PRIs
;
; sample 1 for Germany
;internationalprefix = 00
;nationalprefix = 0
;localprefix = 0711
;privateprefix = 07115678
;unknownprefix =
;
; UK
internationalprefix = 00
nationalprefix = 0
localprefix = 01786
privateprefix = 017864551
unknownprefix =
; Whether or not to use caller ID
;
usecallerid=yes
;
; Type of caller ID signalling in use
; bell = bell202 as used in US, v23 = v23 as used in the UK, dtmf = DTMF as used
 in Denmark, Sweden and Netherlands
;
;cidsignalling=bell
;
; What signals the start of caller ID
; ring = a ring signals the start, polarity = polarity reversal signals the star
t
;
;cidstart=ring
;
; Whether or not to hide outgoing caller ID (Override with *67 or *82)
;
hidecallerid=no
;
; Whether or not to enable call waiting on FXO lines
;
callwaiting=no
:;
restrictcid=no
;
; Whether or not use the caller ID presentation for the outgoing call that the c
alling switch is sending
;
usecallingpres=yes
;
; Some countries (UK) have ring tones with different ring tones (ring-ring),
; which means the callerid needs to be set later on, and not just after
; the first ring, as per the default.
;
;sendcalleridafter=1
;
;
; Support Caller*ID on Call Waiting
;
callwaitingcallerid=yes
;
; Support three-way calling
;
threewaycalling=yes
;
; Support flash-hook call transfer (requires three way calling)
:;
transfer=yes
;
; Allow call parking
; ('canpark=no' is overridden by 'transfer=yes')
;
canpark=yes
;
; Support call forward variable
;
cancallforward=yes
;
; Whether or not to support Call Return (*69)
;
callreturn=yes
;
; Stutter dialtone support: If a mailbox is specified without a voicemail
; context, then when voicemail is received in a mailbox in the default
; voicemail context in voicemail.conf, taking the phone off hook will
; cause a stutter dialtone instead of a normal one.
;
; If a mailbox is specified *with* a voicemail context, the same will
; result if voicemail recieved in mailbox in the specified voicemail
; context
:
group=1
signalling=pri_cpe
switchtype=euroisdn
context=incomingfrompstn
callerid=asreceived
channel=>1-10

group=2
signalling=fxo_ls
pickupgroup=2
callgroup=2
context=officeanalogue
channel=>32-35