BIOS EBDA/lowmem at: 0009fc00/0009fc00 Linux version 2.6.28.4-desktop-1mnb (herton@build1.conectiva) (gcc version 4.3.2 (GCC) ) #1 SMP Mon Feb 9 08:13:12 EST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bfd70000 (usable) BIOS-e820: 00000000bfd70000 - 00000000bfdbf000 (reserved) BIOS-e820: 00000000bfdbf000 - 00000000bfe58000 (usable) BIOS-e820: 00000000bfe58000 - 00000000bfebf000 (ACPI NVS) BIOS-e820: 00000000bfebf000 - 00000000bfeed000 (usable) BIOS-e820: 00000000bfeed000 - 00000000bfeff000 (ACPI data) BIOS-e820: 00000000bfeff000 - 00000000bff00000 (usable) BIOS-e820: 00000000e0000000 - 00000000e1000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) DMI 2.4 present. last_pfn = 0xbff00 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 kernel direct mapping tables up to 377fe000 @ 7000-d000 RAMDISK: 37b7f000 - 37fefcc0 Allocated new RAMDISK: 00634000 - 00aa4cc0 Move RAMDISK from 0000000037b7f000 - 0000000037fefcbf to 00634000 - 00aa4cbf ACPI: RSDP 000FE020, 0024 (r2 HP ) ACPI: XSDT BFEFE120, 005C (r1 HPQOEM SLIC-MPC 1 1000013) ACPI: FACP BFEFD000, 00F4 (r4 HP TRINITY 3 LOHR 1000013) ACPI: DSDT BFEF0000, 9F33 (r1 HP TRINITY F0000000 LOHR 1000013) ACPI: FACS BFE61000, 0040 ACPI: HPET BFEFC000, 0038 (r1 HPQOEM SLIC-MPC 1 LOHR 1000013) ACPI: APIC BFEFB000, 0084 (r2 HPQOEM SLIC-MPC 1 LOHR 1000013) ACPI: MCFG BFEFA000, 003C (r1 HPQOEM SLIC-MPC 1 LOHR 1000013) ACPI: BOOT BFEEF000, 0028 (r1 HPQOEM SLIC-MPC 1 LOHR 1000013) ACPI: SLIC BFEEE000, 0176 (r1 HPQOEM SLIC-MPC 1 LOHR 1000013) ACPI: SSDT BFEED000, 0386 (r1 AMD PowerNow 1 AMD 1) ACPI: Local APIC address 0xfee00000 2183MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 00000000 - 377fe000 bootmap 00009000 - 0000ff00 (9 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 0000630a20] TEXT DATA BSS ==> [0000100000 - 0000630a20] #4 [0000631000 - 0000634000] INIT_PG_TABLE ==> [0000631000 - 0000634000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #7 [0000634000 - 0000aa4cc0] NEW RAMDISK ==> [0000634000 - 0000aa4cc0] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x000bff00 Movable zone start PFN for each node early_node_map[5] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000bfd70 0: 0x000bfdbf -> 0x000bfe58 0: 0x000bfebf -> 0x000bfeed 0: 0x000bfeff -> 0x000bff00 On node 0 totalpages: 785879 free_area_init_node: node 0, pgdat c04dc880, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 4367 pages used for memmap HighMem zone: 554283 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x1002a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 2 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at c0000000 (gap: bff00000:20100000) PERCPU: Allocating 40960 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779736 Kernel command line: BOOT_IMAGE=linux root=UUID=d70b76ce-a85c-41cf-9cd4-4a3140bb15ab resume=UUID=ca2c626e-a496-11dd-ad15-001eec9f4dd3 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 2099.893 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3107140k/3144704k available (2684k kernel code, 35504k reserved, 1499k data, 420k init, 2234600k highmem) virtual kernel memory layout: fixmap : 0xffe18000 - 0xfffff000 (1948 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc051e000 - 0xc0587000 ( 420 kB) .data : 0xc039f311 - 0xc05160dc (1499 kB) .text : 0xc0100000 - 0xc039f311 (2684 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 hpet clockevent registered HPET: 4 timers in total, 1 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 4199.78 BogoMIPS (lpj=2099893) Security Framework initialized Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using C1E aware idle routine Checking 'hlt' instruction... OK. Early unpacking initramfs... done Freeing initrd memory: 4547k freed ACPI: Core revision 20080926 ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-80 stepping 01 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4189.87 BogoMIPS (lpj=2094935) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-80 stepping 01 checking TSC synchronization [CPU#0 -> CPU#1]: Measured 203242470 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to check_tsc_sync_source failed Brought up 2 CPUs Total of 2 processors activated (8389.65 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 net_namespace: 776 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 15 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:11.0: reg 10 io port: [0x8038-0x803f] pci 0000:00:11.0: reg 14 io port: [0x804c-0x804f] pci 0000:00:11.0: reg 18 io port: [0x8030-0x8037] pci 0000:00:11.0: reg 1c io port: [0x8048-0x804b] pci 0000:00:11.0: reg 20 io port: [0x8010-0x801f] pci 0000:00:11.0: reg 24 32bit mmio: [0xd2508000-0xd25083ff] pci 0000:00:12.0: reg 10 32bit mmio: [0xd2507000-0xd2507fff] pci 0000:00:12.1: reg 10 32bit mmio: [0xd2506000-0xd2506fff] pci 0000:00:12.2: reg 10 32bit mmio: [0xd2508500-0xd25085ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: reg 10 32bit mmio: [0xd2505000-0xd2505fff] pci 0000:00:13.1: reg 10 32bit mmio: [0xd2504000-0xd2504fff] pci 0000:00:13.2: reg 10 32bit mmio: [0xd2508400-0xd25084ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.1: reg 10 io port: [0x00-0x07] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] pci 0000:00:14.1: reg 20 io port: [0x8000-0x800f] pci 0000:00:14.2: reg 10 64bit mmio: [0xd2500000-0xd2503fff] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio: [0xc0000000-0xcfffffff] pci 0000:01:00.0: reg 14 io port: [0x7000-0x70ff] pci 0000:01:00.0: reg 18 32bit mmio: [0xd2400000-0xd240ffff] pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10 32bit mmio: [0xd2410000-0xd2413fff] pci 0000:01:00.1: supports D1 D2 pci 0000:00:02.0: bridge io port: [0x7000-0x7fff] pci 0000:00:02.0: bridge 32bit mmio: [0xd2400000-0xd24fffff] pci 0000:00:02.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] pci 0000:00:04.0: bridge io port: [0x3000-0x6fff] pci 0000:00:04.0: bridge 32bit mmio: [0xd1400000-0xd23fffff] pci 0000:00:04.0: bridge 64bit mmio pref: [0xd0000000-0xd0ffffff] pci 0000:08:00.0: reg 10 32bit mmio: [0xd1300000-0xd13007ff] pci 0000:08:00.0: reg 14 32bit mmio: [0xd1300d00-0xd1300d7f] pci 0000:08:00.0: reg 20 32bit mmio: [0xd1300c80-0xd1300cff] pci 0000:08:00.0: reg 24 32bit mmio: [0xd1300c00-0xd1300c7f] pci 0000:08:00.1: reg 10 32bit mmio: [0xd1300b00-0xd1300bff] pci 0000:08:00.2: reg 10 32bit mmio: [0xd1300a00-0xd1300aff] pci 0000:08:00.3: reg 10 32bit mmio: [0xd1300900-0xd13009ff] pci 0000:08:00.4: reg 10 32bit mmio: [0xd1300800-0xd13008ff] pci 0000:00:05.0: bridge 32bit mmio: [0xd1300000-0xd13fffff] pci 0000:09:00.0: reg 10 64bit mmio: [0xd1200000-0xd120ffff] pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:06.0: bridge 32bit mmio: [0xd1200000-0xd12fffff] pci 0000:0a:00.0: reg 10 io port: [0x2000-0x20ff] pci 0000:0a:00.0: reg 18 64bit mmio: [0xd1100000-0xd1100fff] pci 0000:0a:00.0: reg 20 64bit mmio: [0xd1000000-0xd100ffff] pci 0000:0a:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] pci 0000:0a:00.0: supports D1 D2 pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:0a:00.0: PME# disabled pci 0000:00:07.0: bridge io port: [0x2000-0x2fff] pci 0000:00:07.0: bridge 32bit mmio: [0xd1100000-0xd11fffff] pci 0000:00:07.0: bridge 64bit mmio pref: [0xd1000000-0xd10fffff] pci 0000:00:14.4: transparent bridge pci 0000:00:14.4: bridge io port: [0x1000-0x1fff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 1279, 0 hpet0: 4 comparators, 32-bit 14.318180 MHz counter hpet: hpet2 irq 1279 for MSI _OSC request fails Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved system 00:08: ioport range 0x400-0x4cf has been reserved system 00:08: ioport range 0x4d0-0x4d1 has been reserved system 00:08: ioport range 0x4d6-0x4d6 has been reserved system 00:08: ioport range 0x680-0x6ff has been reserved system 00:08: ioport range 0x77a-0x77a has been reserved system 00:08: ioport range 0xc00-0xc01 has been reserved system 00:08: ioport range 0xc14-0xc14 has been reserved system 00:08: ioport range 0xc50-0xc52 has been reserved system 00:08: ioport range 0xc6c-0xc6c has been reserved system 00:08: ioport range 0xc6f-0xc6f has been reserved system 00:08: ioport range 0xcd0-0xcdb has been reserved system 00:09: iomem range 0xe0000-0xfffff could not be reserved system 00:09: iomem range 0xfff00000-0xffffffff has been reserved pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 pci 0000:00:02.0: IO window: 0x7000-0x7fff pci 0000:00:02.0: MEM window: 0xd2400000-0xd24fffff pci 0000:00:02.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 pci 0000:00:04.0: IO window: 0x3000-0x6fff pci 0000:00:04.0: MEM window: 0xd1400000-0xd23fffff pci 0000:00:04.0: PREFETCH window: 0x000000d0000000-0x000000d0ffffff pci 0000:00:05.0: PCI bridge, secondary bus 0000:08 pci 0000:00:05.0: IO window: disabled pci 0000:00:05.0: MEM window: 0xd1300000-0xd13fffff pci 0000:00:05.0: PREFETCH window: disabled pci 0000:00:06.0: PCI bridge, secondary bus 0000:09 pci 0000:00:06.0: IO window: disabled pci 0000:00:06.0: MEM window: 0xd1200000-0xd12fffff pci 0000:00:06.0: PREFETCH window: disabled pci 0000:00:07.0: PCI bridge, secondary bus 0000:0a pci 0000:00:07.0: IO window: 0x2000-0x2fff pci 0000:00:07.0: MEM window: 0xd1100000-0xd11fffff pci 0000:00:07.0: PREFETCH window: 0x000000d1000000-0x000000d10fffff pci 0000:00:14.4: PCI bridge, secondary bus 0000:80 pci 0000:00:14.4: IO window: 0x1000-0x1fff pci 0000:00:14.4: MEM window: disabled pci 0000:00:14.4: PREFETCH window: disabled pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:04.0: setting latency timer to 64 pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:05.0: setting latency timer to 64 pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:06.0: setting latency timer to 64 pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:07.0: setting latency timer to 64 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffff] bus: 01 index 0 io port: [0x7000-0x7fff] bus: 01 index 1 mmio: [0xd2400000-0xd24fffff] bus: 01 index 2 mmio: [0xc0000000-0xcfffffff] bus: 01 index 3 mmio: [0x0-0x0] bus: 02 index 0 io port: [0x3000-0x6fff] bus: 02 index 1 mmio: [0xd1400000-0xd23fffff] bus: 02 index 2 mmio: [0xd0000000-0xd0ffffff] bus: 02 index 3 mmio: [0x0-0x0] bus: 08 index 0 mmio: [0x0-0x0] bus: 08 index 1 mmio: [0xd1300000-0xd13fffff] bus: 08 index 2 mmio: [0x0-0x0] bus: 08 index 3 mmio: [0x0-0x0] bus: 09 index 0 mmio: [0x0-0x0] bus: 09 index 1 mmio: [0xd1200000-0xd12fffff] bus: 09 index 2 mmio: [0x0-0x0] bus: 09 index 3 mmio: [0x0-0x0] bus: 0a index 0 io port: [0x2000-0x2fff] bus: 0a index 1 mmio: [0xd1100000-0xd11fffff] bus: 0a index 2 mmio: [0xd1000000-0xd10fffff] bus: 0a index 3 mmio: [0x0-0x0] bus: 80 index 0 io port: [0x1000-0x1fff] bus: 80 index 1 mmio: [0x0-0x0] bus: 80 index 2 mmio: [0x0-0x0] bus: 80 index 3 io port: [0x00-0xffff] bus: 80 index 4 mmio: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Simple Boot Flag at 0x44 set to 0x1 apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1234739357.592:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Hook version: 2.6.28-rc7 2008/12/02 msgmni has been set to 1714 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device _OSC request fails _OSC request fails pcieport-driver 0000:00:02.0: setting latency timer to 64 pcieport-driver 0000:00:02.0: found MSI capability pcieport-driver 0000:00:02.0: irq 1278 for MSI/MSI-X pci_express 0000:00:02.0:pcie00: allocate port service pci_express 0000:00:02.0:pcie03: allocate port service pcieport-driver 0000:00:04.0: setting latency timer to 64 pcieport-driver 0000:00:04.0: found MSI capability pcieport-driver 0000:00:04.0: irq 1277 for MSI/MSI-X pci_express 0000:00:04.0:pcie00: allocate port service pci_express 0000:00:04.0:pcie02: allocate port service pci_express 0000:00:04.0:pcie03: allocate port service pcieport-driver 0000:00:05.0: setting latency timer to 64 pcieport-driver 0000:00:05.0: found MSI capability pcieport-driver 0000:00:05.0: irq 1276 for MSI/MSI-X pci_express 0000:00:05.0:pcie00: allocate port service pci_express 0000:00:05.0:pcie03: allocate port service pcieport-driver 0000:00:06.0: setting latency timer to 64 pcieport-driver 0000:00:06.0: found MSI capability pcieport-driver 0000:00:06.0: irq 1275 for MSI/MSI-X pci_express 0000:00:06.0:pcie00: allocate port service pci_express 0000:00:06.0:pcie03: allocate port service pcieport-driver 0000:00:07.0: setting latency timer to 64 pcieport-driver 0000:00:07.0: found MSI capability pcieport-driver 0000:00:07.0: irq 1274 for MSI/MSI-X pci_express 0000:00:07.0:pcie00: allocate port service pci_express 0000:00:07.0:pcie03: allocate port service isapnp: Scanning for PnP cards... Clocksource tsc unstable (delta = -97980721 ns) isapnp: No Plug & Play device found Serial: 8250/16550 driver4 ports, IRQ sharing enabled brd: module loaded PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered Using IPI No-Shortcut mode registered taskstats version 1 BIOS EDD facility v0.16 2004-Jun-25, 2 devices found Freeing unused kernel memory: 420k freed input: AT Translated Set 2 keyboard as /class/input/input0 SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: setting latency timer to 64 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xd2508500 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.28.4-desktop-1mnb ehci_hcd usb usb1: SerialNumber: 0000:00:12.2 ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: setting latency timer to 64 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xd2508400 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.28.4-desktop-1mnb ehci_hcd usb usb2: SerialNumber: 0000:00:13.2 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.0: setting latency timer to 64 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:12.0: irq 16, io mem 0xd2507000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.28.4-desktop-1mnb ohci_hcd usb usb3: SerialNumber: 0000:00:12.0 ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: setting latency timer to 64 ohci_hcd 0000:00:12.1: OHCI Host Controller ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.1: irq 16, io mem 0xd2506000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.28.4-desktop-1mnb ohci_hcd usb usb4: SerialNumber: 0000:00:12.1 ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: setting latency timer to 64 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xd2505000 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: OHCI Host Controller usb usb5: Manufacturer: Linux 2.6.28.4-desktop-1mnb ohci_hcd usb usb5: SerialNumber: 0000:00:13.0 ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.1: setting latency timer to 64 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.1: irq 18, io mem 0xd2504000 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: OHCI Host Controller usb usb6: Manufacturer: Linux 2.6.28.4-desktop-1mnb ohci_hcd usb usb6: SerialNumber: 0000:00:13.1 uhci_hcd: USB Universal Host Controller Interface driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. libata version 3.00 loaded. pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pata_atiixp 0000:00:14.1: setting latency timer to 64 scsi0 : pata_atiixp scsi1 : pata_atiixp ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8000 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8008 irq 15 usb 1-5: new high speed USB device using ehci_hcd and address 3 usb 1-5: configuration #1 chosen from 1 choice scsi2 : SCSI emulation for USB Mass Storage devices usb 1-5: New USB device found, idVendor=054c, idProduct=0243 usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-5: Product: Storage Media usb 1-5: Manufacturer: Sony usb 1-5: SerialNumber: 2A081001L5175 usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usb 1-6: new high speed USB device using ehci_hcd and address 4 usb 1-6: configuration #1 chosen from 1 choice usb 1-6: New USB device found, idVendor=046d, idProduct=09b8 usb 1-6: New USB device strings: Mfr=0, Product=2, SerialNumber=0 usb 1-6: Product: HP Webcam ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio scsi3 : ahci scsi4 : ahci scsi5 : ahci scsi6 : ahci scsi7 : ahci scsi8 : ahci ata3: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508100 irq 22 ata4: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508180 irq 22 ata5: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508200 irq 22 ata6: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508280 irq 22 ata7: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508300 irq 22 ata8: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508380 irq 22 usb 3-1: new low speed USB device using ohci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice usb 3-1: New USB device found, idVendor=15ca, idProduct=00c3 usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 usb 3-1: Product: USB Optical Mouse usb 2-5: new high speed USB device using ehci_hcd and address 2 usb 2-5: configuration #1 chosen from 1 choice usb 2-5: New USB device found, idVendor=07ca, idProduct=a309 usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-5: Product: A309 usb 2-5: Manufacturer: AVerMedia usb 2-5: SerialNumber: 301159900462000 Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04751/0xa00000 ata3: softreset failed (device not ready) ata3: failed due to HW bug, retry pmp=0 input: SynPS/2 Synaptics TouchPad as /class/input/input1 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-8: FUJITSU MHZ2250BH G2, 8909, max UDMA/100 ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata3.00: configured for UDMA/100 ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: softreset failed (device not ready) ata6: failed due to HW bug, retry pmp=0 ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata6.00: ATAPI: HL-DT-ST DVDRAM GSA-T30L, GC04, max UDMA/100 ata6.00: configured for UDMA/100 ata7: SATA link down (SStatus 0 SControl 300) ata8: SATA link down (SStatus 0 SControl 300) scsi 3:0:0:0: Direct-Access ATA FUJITSU MHZ2250B 8909 PQ: 0 ANSI: 5 sd 3:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) sd 3:0:0:0: [sda] Write Protect is off sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) sd 3:0:0:0: [sda] Write Protect is off sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > sd 3:0:0:0: [sda] Attached SCSI disk scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T30L GC04 PQ: 0 ANSI: 5 scsi 2:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 0 CCS sd 2:0:0:0: [sdb] 31326208 512-byte hardware sectors: (16.0 GB/14.9 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] 31326208 512-byte hardware sectors: (16.0 GB/14.9 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 sd 2:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > sd 2:0:0:0: [sdb] Attached SCSI removable disk usb-storage: device scan complete kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. TomoyoLinux Mandatory Access Control disabled by default. You need to install ccs-tools if you want to enable it. ACPI: AC Adapter [ACAD] (on-line) input: Power Button (FF) as /class/input/input2 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input3 ACPI: Power Button (CM) [PWRB] input: Lid Switch as /class/input/input4 ACPI: Lid Switch [LID] processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) processor ACPI_CPU:01: registered as cooling_device1 ACPI: WMI: Mapper loaded rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 114 bytes nvram, hpet irqs ACPI: Battery Slot [BAT0] (battery absent) lis3lv02d: laptop model unknown, using default axes configuration input: ST LIS3LV02DL Accelerometer as /class/input/input5 lis3lv02d driver loaded. r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:0a:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 r8169 0000:0a:00.0: setting latency timer to 64 r8169 0000:0a:00.0: irq 1273 for MSI/MSI-X eth0: RTL8168c/8111c at 0xf8272000, 00:1e:ec:9f:4d:d3, XID 3c2000c0 IRQ 1273 sd 3:0:0:0: Attached scsi generic sg0 type 0 scsi 6:0:0:0: Attached scsi generic sg1 type 5 sd 2:0:0:0: Attached scsi generic sg2 type 0 thermal LNXTHERM:01: registered as thermal_zone0 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 6:0:0:0: Attached scsi CD-ROM sr0 acpi device:0b: registered as cooling_device2 input: Video Bus as /class/input/input6 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) ACPI: Thermal Zone [TZ01] (66 C) ohci1394 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ohci1394 0000:08:00.0: setting latency timer to 64 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[d1300000-d13007ff] Max Packet=[2048] IR/IT contexts=[4/4] sdhci-pci 0000:08:00.1: SDHCI controller found [197b:2382] (rev 0) sdhci-pci 0000:08:00.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 sdhci-pci 0000:08:00.1: setting latency timer to 64 mmc0: SDHCI controller on PCI [0000:08:00.1] using DMA sdhci-pci 0000:08:00.2: SDHCI controller found [197b:2381] (rev 0) sdhci-pci 0000:08:00.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17 sdhci-pci 0000:08:00.2: Refusing to bind to secondary interface. sdhci-pci 0000:08:00.2: PCI INT A disabled cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: US cfg80211: Regulatory domain changed to country: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) ath5k_pci 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ath5k_pci 0000:09:00.0: setting latency timer to 64 ath5k_pci 0000:09:00.0: registered as 'phy0' phy0: Selected rate control algorithm 'pid' jmb38x_ms 0000:08:00.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17 jmb38x_ms 0000:08:00.3: setting latency timer to 64 leds-hp-disk driver loaded. input: PC Speaker as /class/input/input7 ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) usbcore: registered new interface driver hiddev input: USB Optical Mouse as /class/input/input8 generic-usb 0003:15CA:00C3.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:12.0-1/input0 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device HP Webcam (046d:09b8) uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. input: HP Webcam as /class/input/input9 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) dvb-usb: found a 'AVerMedia A309' in cold state, will try to load a firmware usb 2-5: firmware: requesting dvb-usb-af9015.fw dvb-usb: did not find the firmware file. (dvb-usb-af9015.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2) dvb_usb_af9015: probe of 2-5:1.0 failed with error -2 usbcore: registered new interface driver dvb_usb_af9015 HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 hda_intel: enable_msi set to 0x1 for device 103c:30fc HDA Intel 0000:00:14.2: setting latency timer to 64 BUG: unable to handle kernel NULL pointer dereference at 0000001c IP: [] patch_stac92hd71bxx+0x52a/0x8a0 [snd_hda_intel] *pde = 00000000 Oops: 0000 [#1] SMP last sysfs file: /sys/module/snd_pcm/initstate Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: snd_hda_intel(+) snd_hwdep snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm dvb_usb_af9015 snd_timer dvb_usb hid_dell hid_multilaser hid_pl hid_cypress hid_zpff hid_gyration hid_bright hid_sony hid_samsung hid_microsoft hid_tmff hid_monterey hid_ezkey hid_apple hid_a4tech snd_page_alloc hid_logitech dvb_core snd_mixer_oss snd uvcvideo compat_ioctl32 videodev v4l1_compat usbhid ff_memless hid_cherry hid_sunplus hid_petalynx hid_belkin soundcore hid_chicony arc4 pcspkr leds_hp_disk jmb38x_ms ecb ath5k mac80211 led_class i2c_piix4 sdhci_pci sdhci i2c_core mmc_core cfg80211 ohci1394 ieee1394 memstick sr_mod video sg hid joydev output thermal r8169 mii lis3lv02d rtc_cmos evdev wmi processor button battery ac ata_piix ahci pata_atiixp libata usb_storage uhci_hcd ohci_hcd ehci_hcd usbcore sd_mod scsi_mod crc_t10dif ext3 jbd Pid: 931, comm: modprobe Not tainted (2.6.28.4-desktop-1mnb #1) HP Pavilion dv7 Notebook PC EIP: 0060:[] EFLAGS: 00010212 CPU: 0 EIP is at patch_stac92hd71bxx+0x52a/0x8a0 [snd_hda_intel] EAX: 00000000 EBX: 00000000 ECX: f8724a4a EDX: f7046000 ESI: 0000001c EDI: 0000000d EBP: f6301c58 ESP: f6301c14 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process modprobe (pid: 931, ti=f6300000 task=f61f3de0 task.ti=f6300000) Stack: f8724a80 f6301c38 f7046000 f658aa00 f7046264 f8724a00 00000000 f86e940b f7046000 f6519294 f86c76d3 00000f20 0000001c 00000000 111d76b2 f658aa00 f6036e40 f6301cc8 f86e6b84 00000f20 00000000 00000000 00200200 fffb91c5 Call Trace: [] ? snd_hda_codec_read+0x63/0x80 [snd_hda_intel] [] ? snd_hda_codec_new+0x380/0x529 [snd_hda_intel] [] ? snd_device_new+0x24/0x80 [snd] [] ? snd_hda_bus_new+0x92/0xc8 [snd_hda_intel] [] ? azx_probe+0x3eb/0xbc0 [snd_hda_intel] [] ? azx_send_cmd+0x0/0x110 [snd_hda_intel] [] ? azx_get_response+0x0/0x200 [snd_hda_intel] [] ? azx_power_notify+0x0/0x90 [snd_hda_intel] [] ? pci_device_probe+0x5e/0x80 [] ? driver_probe_device+0x9d/0x2e0 [] ? __driver_attach+0x89/0x90 [] ? bus_for_each_dev+0x4b/0x70 [] ? pci_device_remove+0x0/0x40 [] ? driver_attach+0x19/0x20 [] ? __driver_attach+0x0/0x90 [] ? bus_add_driver+0x1c7/0x290 [] ? pci_device_remove+0x0/0x40 [] ? driver_register+0x69/0x140 [] ? __vunmap+0x9c/0xe0 [] ? __pci_register_driver+0x4a/0x90 [] ? alsa_card_azx_init+0x0/0x19 [snd_hda_intel] [] ? alsa_card_azx_init+0x17/0x19 [snd_hda_intel] [] ? do_one_initcall+0x26/0x180 [] ? load_module+0x189c/0x1ca0 [] ? generic_file_aio_read+0x23c/0x6c0 [] ? enqueue_task_fair+0x17f/0x360 [] ? xapic_wait_icr_idle+0x17/0x20 [] ? native_smp_send_reschedule+0x30/0x50 [] ? try_to_wake_up+0xf4/0x280 [] ? blocking_notifier_call_chain+0x1a/0x20 [] ? sys_init_module+0x96/0x1c0 [] ? sys_read+0x3d/0x70 [] ? sysenter_do_call+0x12/0x2f Code: c0 00 00 00 00 00 00 00 e9 43 fe ff ff 8d 74 26 00 31 c0 e9 14 fe ff ff 90 c1 e0 02 89 45 ec 8b 55 dc 8b 75 ec 8b 82 e0 00 00 00 <8b> 04 30 c1 e8 1e 83 e8 01 0f 84 d9 fc ff ff 83 c3 01 83 fb 02 EIP: [] patch_stac92hd71bxx+0x52a/0x8a0 [snd_hda_intel] SS:ESP 0068:f6301c14 ---[ end trace 504e7a71182e899a ]--- Non-volatile memory driver v1.2 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com EXT3 FS on sdb1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sdb6, internal journal EXT3-fs: mounted filesystem with ordered data mode. loop: module loaded Adding 2104472k swap on /dev/sdb5. Priority:-1 extents:1 across:2104472k Adding 5172888k swap on /dev/sda6. Priority:-2 extents:1 across:5172888k ieee1394: Host added: ID:BUS[0-00:1023] GUID[883f0200b11140d7] NET: Registered protocol family 10 lo: Disabled Privacy Extensions r8169: eth0: link up r8169: eth0: link up NET: Registered protocol family 17 usb 1-5: reset high speed USB device using ehci_hcd and address 3