Linux version 2.6.27-gentoo-r8 (root@mizar) (gcc version 4.1.2 (Gentoo 4.1.2 p1.3)) #5 SMP Sat Feb 28 14:34:14 CET 2009 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000008f000 (usable) BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cf1bf000 (usable) BIOS-e820: 00000000cf1bf000 - 00000000cf2a5000 (ACPI NVS) BIOS-e820: 00000000cf2a5000 - 00000000cfd85000 (usable) BIOS-e820: 00000000cfd85000 - 00000000cfd8d000 (reserved) BIOS-e820: 00000000cfd8d000 - 00000000cfe2c000 (usable) BIOS-e820: 00000000cfe2c000 - 00000000cfe30000 (reserved) BIOS-e820: 00000000cfe30000 - 00000000cfea9000 (usable) BIOS-e820: 00000000cfea9000 - 00000000cfeae000 (ACPI data) BIOS-e820: 00000000cfeae000 - 00000000cfef2000 (ACPI NVS) BIOS-e820: 00000000cfef2000 - 00000000cfef3000 (usable) BIOS-e820: 00000000cfef3000 - 00000000cfeff000 (ACPI data) BIOS-e820: 00000000cfeff000 - 00000000cff00000 (usable) BIOS-e820: 00000000cff00000 - 00000000d0000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000230000000 (usable) DMI 2.4 present. last_pfn = 0x230000 max_arch_pfn = 0x1000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 kernel direct mapping tables up to 38000000 @ 7000-c000 NX (Execute Disable) protection: active ACPI: RSDP 000FE020, 0014 (r0 INTEL ) ACPI: RSDT CFEFD038, 0050 (r1 INTEL D975XBX2 B16 1000013) ACPI: FACP CFEFC000, 0074 (r1 INTEL D975XBX2 B16 MSFT 1000013) ACPI: DSDT CFEF8000, 3F46 (r1 INTEL D975XBX2 B16 MSFT 1000013) ACPI: FACS CFEAE000, 0040 ACPI: APIC CFEF7000, 0078 (r1 INTEL D975XBX2 B16 MSFT 1000013) ACPI: WDDT CFEF6000, 0040 (r1 INTEL D975XBX2 B16 MSFT 1000013) ACPI: MCFG CFEF5000, 003C (r1 INTEL D975XBX2 B16 MSFT 1000013) ACPI: ASF! CFEF4000, 00A6 (r32 INTEL D975XBX2 B16 MSFT 1000013) ACPI: HPET CFEF3000, 0038 (r1 INTEL D975XBX2 B16 MSFT 1000013) ACPI: SSDT CFEAD000, 01BC (r1 INTEL CpuPm B16 MSFT 1000013) ACPI: SSDT CFEAC000, 0175 (r1 INTEL Cpu0Ist B16 MSFT 1000013) ACPI: SSDT CFEAB000, 0175 (r1 INTEL Cpu1Ist B16 MSFT 1000013) ACPI: SSDT CFEAA000, 0175 (r1 INTEL Cpu2Ist B16 MSFT 1000013) ACPI: SSDT CFEA9000, 0175 (r1 INTEL Cpu3Ist B16 MSFT 1000013) ACPI: DMI detected: Apple 8064MB HIGHMEM available. 896MB LOWMEM available. mapped low ram: 0 - 38000000 low ram: 00000000 - 38000000 bootmap 00009000 - 00010000 (8 early reservations) ==> bootmem [0000000000 - 0038000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000200000 - 00007e9558] TEXT DATA BSS ==> [0000200000 - 00007e9558] #4 [00007ea000 - 00007f3000] INIT_PG_TABLE ==> [00007ea000 - 00007f3000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #7 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] found SMP MP-table at [c00fe200] 000fe200 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00038000 HighMem 0x00038000 -> 0x00230000 Movable zone start PFN for each node early_node_map[8] active PFN ranges 0: 0x00000000 -> 0x0000008f 0: 0x00000100 -> 0x000cf1bf 0: 0x000cf2a5 -> 0x000cfd85 0: 0x000cfd8d -> 0x000cfe2c 0: 0x000cfe30 -> 0x000cfea9 0: 0x000cfef2 -> 0x000cfef3 0: 0x000cfeff -> 0x000cff00 0: 0x00100000 -> 0x00230000 On node 0 totalpages: 2096456 free_area_init_node: node 0, pgdat c0723280, node_mem_map c1000000 DMA zone: 3951 pages, LIFO batch:0 Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 1851065 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 2 hotplug CPUs mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Allocating PCI resources starting at d4000000 (gap: d0000000:2ff00000) PERCPU: Allocating 38684 bytes of per cpu data NR_CPUS: 4, nr_cpu_ids: 4, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2078536 Kernel command line: root=/dev/sda3 quiet splash Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 2400.064 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 8306108k/9175040k available (3821k kernel code, 78888k reserved, 1513k data, 300k init, 7468772k highmem) virtual kernel memory layout: fixmap : 0xfff85000 - 0xfffff000 ( 488 kB) pkmap : 0xffa00000 - 0xffc00000 (2048 kB) vmalloc : 0xf8800000 - 0xff9fe000 ( 113 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc073c000 - 0xc0787000 ( 300 kB) .data : 0xc05bb6dd - 0xc0735c30 (1513 kB) .text : 0xc0200000 - 0xc05bb6dd (3821 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.12 BogoMIPS (lpj=2400064) Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20080609 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4800.16 BogoMIPS (lpj=2400083) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (9600.29 BogoMIPS). net_namespace: 300 bytes NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 PCI: MCFG area at f0000000 reserved in ACPI motherboard resources PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: Using MMCONFIG for extended config space ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled PCI: 0000:00:1b.0 reg 10 64bit mmio: [e2200000, e2203fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled PCI: 0000:00:1d.0 reg 20 io port: [3080, 309f] PCI: 0000:00:1d.1 reg 20 io port: [3060, 307f] PCI: 0000:00:1d.2 reg 20 io port: [3040, 305f] PCI: 0000:00:1d.3 reg 20 io port: [3020, 303f] PCI: 0000:00:1d.7 reg 10 32bit mmio: [e2204400, e22047ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled PCI: 0000:00:1f.1 reg 10 io port: [0, 7] PCI: 0000:00:1f.1 reg 14 io port: [0, 3] PCI: 0000:00:1f.1 reg 18 io port: [0, 7] PCI: 0000:00:1f.1 reg 1c io port: [0, 3] PCI: 0000:00:1f.1 reg 20 io port: [30b0, 30bf] PCI: 0000:00:1f.2 reg 10 io port: [30c8, 30cf] PCI: 0000:00:1f.2 reg 14 io port: [30e4, 30e7] PCI: 0000:00:1f.2 reg 18 io port: [30c0, 30c7] PCI: 0000:00:1f.2 reg 1c io port: [30e0, 30e3] PCI: 0000:00:1f.2 reg 20 io port: [30a0, 30af] PCI: 0000:00:1f.2 reg 24 32bit mmio: [e2204000, e22043ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled PCI: 0000:00:1f.3 reg 20 io port: [3000, 301f] PCI: 0000:01:00.0 reg 10 32bit mmio: [e1000000, e1ffffff] PCI: 0000:01:00.0 reg 14 64bit mmio: [d0000000, dfffffff] PCI: 0000:01:00.0 reg 1c 64bit mmio: [e0000000, e0ffffff] PCI: 0000:01:00.0 reg 24 io port: [2000, 207f] PCI: 0000:01:00.0 reg 30 32bit mmio: [fffe0000, ffffffff] PCI: bridge 0000:00:01.0 io port: [2000, 2fff] PCI: bridge 0000:00:01.0 32bit mmio: [e0000000, e1ffffff] PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff] PCI: 0000:03:00.0 reg 10 32bit mmio: [e2100000, e211ffff] PCI: 0000:03:00.0 reg 18 io port: [1000, 101f] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled PCI: bridge 0000:00:1c.5 io port: [1000, 1fff] PCI: bridge 0000:00:1c.5 32bit mmio: [e2100000, e21fffff] PCI: 0000:04:00.0 reg 10 32bit mmio: [e2000000, e200ffff] PCI: 0000:04:04.0 reg 10 32bit mmio: [e2014000, e20147ff] PCI: 0000:04:04.0 reg 14 32bit mmio: [e2010000, e2013fff] pci 0000:04:04.0: supports D1 pci 0000:04:04.0: supports D2 pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot pci 0000:04:04.0: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 32bit mmio: [e2000000, e20fffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved system 00:01: iomem range 0xc0000-0xdffff could not be reserved system 00:01: iomem range 0xe0000-0xfffff could not be reserved system 00:06: ioport range 0x500-0x53f has been reserved system 00:06: ioport range 0x400-0x47f has been reserved system 00:06: ioport range 0x680-0x6ff has been reserved pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x2000-0x2fff pci 0000:00:01.0: MEM window: 0xe0000000-0xe1ffffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.5: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.5: IO window: 0x1000-0x1fff pci 0000:00:1c.5: MEM window: 0xe2100000-0xe21fffff pci 0000:00:1c.5: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: 0xe2000000-0xe20fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [2000, 2fff] bus: 01 index 1 mmio: [e0000000, e1ffffff] bus: 01 index 2 mmio: [d0000000, dfffffff] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 mmio: [0, 0] bus: 02 index 1 mmio: [0, 0] bus: 02 index 2 mmio: [0, 0] bus: 02 index 3 mmio: [0, 0] bus: 03 index 0 io port: [1000, 1fff] bus: 03 index 1 mmio: [e2100000, e21fffff] bus: 03 index 2 mmio: [0, 0] bus: 03 index 3 mmio: [0, 0] bus: 04 index 0 mmio: [0, 0] bus: 04 index 1 mmio: [e2000000, e20fffff] bus: 04 index 2 mmio: [0, 0] bus: 04 index 3 io port: [0, ffff] bus: 04 index 4 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 IA-32 Microcode Update Driver: v1.14a highmem bounce pool size: 64 pages HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1637 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f10 pci 0000:00:1d.0: Performing full reset pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 pci 0000:00:1d.1: Performing full reset pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 pci 0000:00:1d.2: Performing full reset pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 pci 0000:00:1d.3: Performing full reset pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pci_express 0000:00:01.0:pcie00: allocate port service pci_express 0000:00:01.0:pcie03: allocate port service pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.5: setting latency timer to 64 pcieport-driver 0000:00:1c.5: found MSI capability pci_express 0000:00:1c.5:pcie00: allocate port service pci_express 0000:00:1c.5:pcie02: allocate port service pci_express 0000:00:1c.5:pcie03: allocate port service lp: driver loaded but no devices found hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 ACPI: Sleep Button (CM) [SLPB] processor ACPI0007:00: registered as cooling_device0 processor ACPI0007:01: registered as cooling_device1 [drm] Initialized drm 1.1.0 20060810 Serial: 8250/16550 driver4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] lp0: using parport0 (interrupt-driven). Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 brd: module loaded loop: module loaded Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:03:00.0: Disabling L1 ASPM e1000e 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 e1000e 0000:03:00.0: setting latency timer to 64 0000:03:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:19:d1:3a:3e:66 0000:03:00.0: eth0: Intel(R) PRO/1000 Network Connection 0000:03:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff ath5k_pci 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ath5k_pci 0000:04:00.0: registered as 'phy0' ath5k phy0: POST Failed !!! ath5k_pci 0000:04:00.0: PCI INT A disabled ath5k_pci: probe of 0000:04:00.0 failed with error -11 Linux video capture interface: v2.00 input: Macintosh mouse button emulation as /devices/virtual/input/input2 Loading iSCSI transport class v2.0-870. Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xe2204000 port 0xe2204100 irq 19 ata2: SATA max UDMA/133 abar m1024@0xe2204000 port 0xe2204180 irq 19 ata3: SATA max UDMA/133 abar m1024@0xe2204000 port 0xe2204200 irq 19 ata4: SATA max UDMA/133 abar m1024@0xe2204000 port 0xe2204280 irq 19 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: ST3320620NS, 3.AEG, max UDMA/133 ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA ST3320620NS 3.AE PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 ata_piix 0000:00:1f.1: version 2.12 ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi4 : ata_piix scsi5 : ata_piix ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30b0 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30b8 irq 15 ata5.00: ATAPI: PIONEER DVD-RW DVR-111L, 8.29, max UDMA/66 ata5.00: configured for UDMA/66 ata6: port disabled. ignoring. scsi 4:0:0:0: CD-ROM PIONEER DVD-RW DVR-111L 8.29 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sr 4:0:0:0: Attached scsi generic sg1 type 5 ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller drivers/usb/core/inode.c: creating file 'devices' drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: supports USB remote wakeup ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe2204400 ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: default language 0x0409 usb usb1: uevent usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: uevent hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 4: status 0501 change 0001 ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 7: status 0501 change 0001 ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 8: status 0501 change 0001 hub 1-0:1.0: state 7 ports 8 chg 0190 evt 0000 drivers/usb/core/inode.c: creating file '001' hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s ehci_hcd 0000:00:1d.7: port 4 low speed --> companion usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27-gentoo-r8 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: block sizes: ed 64 td 64 USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller drivers/usb/core/inode.c: creating file '002' uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: detected 2 ports uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.0: Performing full reset uhci_hcd 0000:00:1d.0: supports USB remote wakeup uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080 usb usb2: default language 0x0409 usb usb2: uevent usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: uevent hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: local power source is good hub 2-0:1.0: trying to enable port power on non-switchable hub ehci_hcd 0000:00:1d.7: GetStatus port 4 status 003002 POWER OWNER sig=se0 CSC hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s drivers/usb/core/inode.c: creating file '001' usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27-gentoo-r8 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller drivers/usb/core/inode.c: creating file '003' uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: detected 2 ports uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.1: Performing full reset uhci_hcd 0000:00:1d.1: supports USB remote wakeup uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060 usb usb3: default language 0x0409 usb usb3: uevent usb usb3: usb_probe_device usb usb3: configuration #1 chosen from 1 choice usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: uevent hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: individual port over-current protection hub 3-0:1.0: power on to power good time: 2ms hub 3-0:1.0: local power source is good hub 3-0:1.0: trying to enable port power on non-switchable hub ehci_hcd 0000:00:1d.7: port 7 high speed ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001005 POWER sig=se0 PE CONNECT usb 1-7: new high speed USB device using ehci_hcd and address 3 uhci_hcd 0000:00:1d.1: port 2 portsc 01ab,00 hub 3-0:1.0: port 2: status 0301 change 0003 ehci_hcd 0000:00:1d.7: port 7 high speed ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001005 POWER sig=se0 PE CONNECT usb 1-7: default language 0x0409 usb 1-7: uevent usb 1-7: usb_probe_device usb 1-7: configuration #1 chosen from 1 choice usb 1-7: adding 1-7:1.0 (config #1, interface 0) usb 1-7:1.0: uevent drivers/usb/core/inode.c: creating file '003' usb 1-7: New USB device found, idVendor=05e3, idProduct=070e usb 1-7: New USB device strings: Mfr=3, Product=4, SerialNumber=5 usb 1-7: Product: USB Reader usb 1-7: Manufacturer: Genesys usb 1-7: SerialNumber: 600000062884 hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s drivers/usb/core/inode.c: creating file '001' usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27-gentoo-r8 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller drivers/usb/core/inode.c: creating file '004' uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: detected 2 ports uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.2: Performing full reset uhci_hcd 0000:00:1d.2: supports USB remote wakeup uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040 usb usb4: default language 0x0409 usb usb4: uevent usb usb4: usb_probe_device usb usb4: configuration #1 chosen from 1 choice usb usb4: adding 4-0:1.0 (config #1, interface 0) usb 4-0:1.0: uevent hub 4-0:1.0: usb_probe_interface hub 4-0:1.0: usb_probe_interface - got id hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hub 4-0:1.0: standalone hub hub 4-0:1.0: no power switching (usb 1.0) hub 4-0:1.0: individual port over-current protection hub 4-0:1.0: power on to power good time: 2ms hub 4-0:1.0: local power source is good hub 4-0:1.0: trying to enable port power on non-switchable hub ehci_hcd 0000:00:1d.7: port 8 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003801 POWER OWNER sig=j CONNECT hub 1-0:1.0: port 8 not reset yet, waiting 50ms ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003002 POWER OWNER sig=se0 CSC hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 3-0:1.0: state 7 ports 2 chg 0004 evt 0000 hub 3-0:1.0: port 2, status 0301, change 0000, 1.5 Mb/s drivers/usb/core/inode.c: creating file '001' usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27-gentoo-r8 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller drivers/usb/core/inode.c: creating file '005' uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: detected 2 ports uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.3: Performing full reset uhci_hcd 0000:00:1d.3: supports USB remote wakeup uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003020 usb usb5: default language 0x0409 usb usb5: uevent usb usb5: usb_probe_device usb usb5: configuration #1 chosen from 1 choice usb usb5: adding 5-0:1.0 (config #1, interface 0) usb 5-0:1.0: uevent hub 5-0:1.0: usb_probe_interface hub 5-0:1.0: usb_probe_interface - got id hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected hub 5-0:1.0: standalone hub hub 5-0:1.0: no power switching (usb 1.0) hub 5-0:1.0: individual port over-current protection hub 5-0:1.0: power on to power good time: 2ms hub 5-0:1.0: local power source is good hub 5-0:1.0: trying to enable port power on non-switchable hub usb 3-2: new low speed USB device using uhci_hcd and address 2 uhci_hcd 0000:00:1d.3: port 1 portsc 0082,00 uhci_hcd 0000:00:1d.3: port 2 portsc 009b,00 hub 5-0:1.0: port 2: status 0101 change 0003 drivers/usb/core/inode.c: creating file '001' usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27-gentoo-r8 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 usb 3-2: skipped 1 descriptor after interface usb 3-2: skipped 1 descriptor after interface usb 3-2: default language 0x0409 usb 3-2: uevent usb 3-2: usb_probe_device usb 3-2: configuration #1 chosen from 1 choice usb 3-2: adding 3-2:1.0 (config #1, interface 0) usb 3-2:1.0: uevent usb 3-2: adding 3-2:1.1 (config #1, interface 1) usb 3-2:1.1: uevent drivers/usb/core/inode.c: creating file '002' usb 3-2: New USB device found, idVendor=046d, idProduct=c517 usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: USB Receiver usb 3-2: Manufacturer: Logitech hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100 hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 5-0:1.0: state 7 ports 2 chg 0004 evt 0000 hub 5-0:1.0: port 2, status 0101, change 0000, 12 Mb/s usb 5-2: new full speed USB device using uhci_hcd and address 2 usb 5-2: skipped 1 descriptor after interface usb 5-2: uevent usb 5-2: usb_probe_device usb 5-2: configuration #1 chosen from 1 choice usb 5-2: adding 5-2:1.0 (config #1, interface 0) usb 5-2:1.0: uevent usb 5-2: adding 5-2:1.1 (config #1, interface 1) usb 5-2:1.1: uevent usb 5-2: adding 5-2:1.2 (config #1, interface 2) usb 5-2:1.2: uevent drivers/usb/core/inode.c: creating file '002' usb 5-2: New USB device found, idVendor=0a12, idProduct=0001 usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usb-storage 1-7:1.0: usb_probe_interface usb-storage 1-7:1.0: usb_probe_interface - got id scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver libusual PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice usb usb2: suspend_rh (auto-stop) rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, hpet irqs i2c /dev entries driver i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 coretemp coretemp.0: Using relative temperature scale! coretemp coretemp.1: Using relative temperature scale! iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) iTCO_wdt: No card detected cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbhid 3-2:1.0: usb_probe_interface usbhid 3-2:1.0: usb_probe_interface - got id input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input3 uhci_hcd 0000:00:1d.1: reserve dev 2 ep81-INT, period 8, phase 4, 118 us input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2 usbhid 3-2:1.1: usb_probe_interface usbhid 3-2:1.1: usb_probe_interface - got id Fixing up Logitech keyboard report descriptor input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input4 uhci_hcd 0000:00:1d.1: reserve dev 2 ep82-INT, period 8, phase 4, 118 us drivers/usb/core/file.c: looking for a minor, starting at 96 input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.17. HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 usb usb4: suspend_rh (auto-stop) ALSA device list: #0: HDA Intel at 0xe2200000 irq 22 TCP cubic registered NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. Starting balanced_irq Using IPI No-Shortcut mode kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 300k freed usb usb2: uevent usb 2-0:1.0: uevent usb usb3: uevent usb 3-0:1.0: uevent usb 3-2: uevent usb 3-2:1.0: uevent usb 3-2:1.1: uevent usb usb4: uevent usb 4-0:1.0: uevent usb usb5: uevent usb 5-0:1.0: uevent usb 5-2: uevent usb 5-2:1.0: uevent usb 5-2:1.1: uevent usb 5-2:1.2: uevent usb usb1: uevent usb 1-0:1.0: uevent usb 1-7: uevent usb 1-7:1.0: uevent hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend usb usb2: suspend_rh hub 4-0:1.0: hub_suspend usb usb4: bus auto-suspend usb usb4: suspend_rh firewire_ohci 0000:04:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 firewire_ohci: Added fw-ohci device 0000:04:04.0, OHCI version 1.10 nvidia: module license 'NVIDIA' taints kernel. firewire_core: created device fw0: GUID 0090270001bedb3a, S400 nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidia 0000:01:00.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86 Kernel Module 177.82 Tue Nov 4 13:35:57 PST 2008 EXT3 FS on sda3, internal journal scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 9325 PQ: 0 ANSI: 0 sd 6:0:0:0: [sdb] Attached SCSI removable disk sd 6:0:0:0: Attached scsi generic sg2 type 0 usb-storage: device scan complete Adding 2097144k swap on /swapfile. Priority:-1 extents:531 across:2166068k 0000:03:00.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX 0000:03:00.0: eth0: 10/100 speed: disabling TSO