Initializing cgroup subsys cpuset Linux version 2.6.27.14-server-1mnb (qateam@titan.mandriva.com) (gcc version 4.3.2 (GCC) ) #1 SMP Wed Feb 18 03:24:00 EST 2009 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bfd70000 (usable) BIOS-e820: 00000000bfd70000 - 00000000bfdbf000 (reserved) BIOS-e820: 00000000bfdbf000 - 00000000bfe58000 (usable) BIOS-e820: 00000000bfe58000 - 00000000bfebf000 (ACPI NVS) BIOS-e820: 00000000bfebf000 - 00000000bfeed000 (usable) BIOS-e820: 00000000bfeed000 - 00000000bfeff000 (ACPI data) BIOS-e820: 00000000bfeff000 - 00000000bff00000 (usable) BIOS-e820: 00000000e0000000 - 00000000e1000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) DMI 2.4 present. last_pfn = 0x140000 max_arch_pfn = 0x1000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 kernel direct mapping tables up to 38000000 @ 7000-c000 NX (Execute Disable) protection: active RAMDISK: 37c73000 - 37fef895 ACPI: RSDP 000FE020, 0024 (r2 HP ) ACPI: XSDT BFEFE120, 005C (r1 HPQOEM SLIC-MPC 1 1000013) ACPI: FACP BFEFD000, 00F4 (r4 HP TRINITY 3 LOHR 1000013) ACPI: DSDT BFEF0000, 9F33 (r1 HP TRINITY F0000000 LOHR 1000013) ACPI: FACS BFE61000, 0040 ACPI: HPET BFEFC000, 0038 (r1 HPQOEM SLIC-MPC 1 LOHR 1000013) ACPI: APIC BFEFB000, 0084 (r2 HPQOEM SLIC-MPC 1 LOHR 1000013) ACPI: MCFG BFEFA000, 003C (r1 HPQOEM SLIC-MPC 1 LOHR 1000013) ACPI: BOOT BFEEF000, 0028 (r1 HPQOEM SLIC-MPC 1 LOHR 1000013) ACPI: SLIC BFEEE000, 0176 (r1 HPQOEM SLIC-MPC 1 LOHR 1000013) ACPI: SSDT BFEED000, 0386 (r1 AMD PowerNow 1 AMD 1) ACPI: DMI detected: Hewlett-Packard 4224MB HIGHMEM available. 896MB LOWMEM available. mapped low ram: 0 - 38000000 low ram: 00000000 - 38000000 bootmap 00008000 - 0000f000 (9 early reservations) ==> bootmem [0000000000 - 0038000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 00005bf8c0] TEXT DATA BSS ==> [0000100000 - 00005bf8c0] #4 [0037c73000 - 0037fef895] RAMDISK ==> [0037c73000 - 0037fef895] #5 [00005c0000 - 00005c7000] INIT_PG_TABLE ==> [00005c0000 - 00005c7000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00038000 HighMem 0x00038000 -> 0x00140000 Movable zone start PFN for each node early_node_map[6] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000bfd70 0: 0x000bfdbf -> 0x000bfe58 0: 0x000bfebf -> 0x000bfeed 0: 0x000bfeff -> 0x000bff00 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1048023 free_area_init_node: node 0, pgdat c04b4700, node_mem_map c1000000 DMA zone: 3967 pages, LIFO batch:0 Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 810296 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x1002a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 2 hotplug CPUs mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at c0000000 (gap: bff00000:20100000) PERCPU: Allocating 45212 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1037783 Kernel command line: BOOT_IMAGE=linux root=UUID=e3610402-a832-11dd-8aad-001eec9f4dd3 resume=UUID=ca2c626e-a496-11dd-ad15-001eec9f4dd3 splash=silent vga=788 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PMTIMER calibration value Detected 2100.064 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 4140708k/5242880k available (2658k kernel code, 50504k reserved, 1240k data, 376k init, 3274976k highmem) virtual kernel memory layout: fixmap : 0xffe18000 - 0xfffff000 (1948 kB) pkmap : 0xffa00000 - 0xffc00000 (2048 kB) vmalloc : 0xf8800000 - 0xff9fe000 ( 113 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc04d6000 - 0xc0534000 ( 376 kB) .data : 0xc0398816 - 0xc04ceb80 (1240 kB) .text : 0xc0100000 - 0xc0398816 (2658 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 4200.12 BogoMIPS (lpj=21000640) Security Framework initialized AppArmor: AppArmor disabled by boottime parameter Mount-cache hash table entries: 512 Hook version: 2.6.27-2.3 2008/08/29 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0(2) -> Core 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using C1E aware idle routine Checking 'hlt' instruction... OK. Early unpacking initramfs... done Freeing initrd memory: 3570k freed ACPI: Core revision 20080609 ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-80 stepping 01 Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4189.76 BogoMIPS (lpj=20948846) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1(2) -> Core 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-80 stepping 01 checking TSC synchronization [CPU#0 -> CPU#1]: Measured 202327772 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to check_tsc_sync_source failed Brought up 2 CPUs Total of 2 processors activated (8389.89 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 net_namespace: 840 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 15 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored via DMI ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled PCI: 0000:00:11.0 reg 10 io port: [8038, 803f] PCI: 0000:00:11.0 reg 14 io port: [804c, 804f] PCI: 0000:00:11.0 reg 18 io port: [8030, 8037] PCI: 0000:00:11.0 reg 1c io port: [8048, 804b] PCI: 0000:00:11.0 reg 20 io port: [8010, 801f] PCI: 0000:00:11.0 reg 24 32bit mmio: [d2508000, d25083ff] PCI: 0000:00:12.0 reg 10 32bit mmio: [d2507000, d2507fff] PCI: 0000:00:12.1 reg 10 32bit mmio: [d2506000, d2506fff] PCI: 0000:00:12.2 reg 10 32bit mmio: [d2508500, d25085ff] pci 0000:00:12.2: supports D1 pci 0000:00:12.2: supports D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled PCI: 0000:00:13.0 reg 10 32bit mmio: [d2505000, d2505fff] PCI: 0000:00:13.1 reg 10 32bit mmio: [d2504000, d2504fff] PCI: 0000:00:13.2 reg 10 32bit mmio: [d2508400, d25084ff] pci 0000:00:13.2: supports D1 pci 0000:00:13.2: supports D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled PCI: 0000:00:14.1 reg 10 io port: [0, 7] PCI: 0000:00:14.1 reg 14 io port: [0, 3] PCI: 0000:00:14.1 reg 18 io port: [0, 7] PCI: 0000:00:14.1 reg 1c io port: [0, 3] PCI: 0000:00:14.1 reg 20 io port: [8000, 800f] PCI: 0000:00:14.2 reg 10 64bit mmio: [d2500000, d2503fff] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled PCI: 0000:01:00.0 reg 10 32bit mmio: [c0000000, cfffffff] PCI: 0000:01:00.0 reg 14 io port: [7000, 70ff] PCI: 0000:01:00.0 reg 18 32bit mmio: [d2400000, d240ffff] PCI: 0000:01:00.0 reg 30 32bit mmio: [fffe0000, ffffffff] pci 0000:01:00.0: supports D1 pci 0000:01:00.0: supports D2 PCI: 0000:01:00.1 reg 10 32bit mmio: [d2410000, d2413fff] pci 0000:01:00.1: supports D1 pci 0000:01:00.1: supports D2 PCI: bridge 0000:00:02.0 io port: [7000, 7fff] PCI: bridge 0000:00:02.0 32bit mmio: [d2400000, d24fffff] PCI: bridge 0000:00:02.0 64bit mmio pref: [c0000000, cfffffff] PCI: bridge 0000:00:04.0 io port: [3000, 6fff] PCI: bridge 0000:00:04.0 32bit mmio: [d1400000, d23fffff] PCI: bridge 0000:00:04.0 64bit mmio pref: [d0000000, d0ffffff] PCI: 0000:08:00.0 reg 10 32bit mmio: [d1300000, d13007ff] PCI: 0000:08:00.0 reg 14 32bit mmio: [d1300d00, d1300d7f] PCI: 0000:08:00.0 reg 20 32bit mmio: [d1300c80, d1300cff] PCI: 0000:08:00.0 reg 24 32bit mmio: [d1300c00, d1300c7f] PCI: 0000:08:00.1 reg 10 32bit mmio: [d1300b00, d1300bff] PCI: 0000:08:00.2 reg 10 32bit mmio: [d1300a00, d1300aff] PCI: 0000:08:00.3 reg 10 32bit mmio: [d1300900, d13009ff] PCI: 0000:08:00.4 reg 10 32bit mmio: [d1300800, d13008ff] PCI: bridge 0000:00:05.0 32bit mmio: [d1300000, d13fffff] PCI: 0000:09:00.0 reg 10 64bit mmio: [d1200000, d120ffff] Pre-1.1 PCIe device detected, disable ASPM for 0000:00:06.0. It can be enabled forcedly with 'pcie_aspm=force' PCI: bridge 0000:00:06.0 32bit mmio: [d1200000, d12fffff] PCI: 0000:0a:00.0 reg 10 io port: [2000, 20ff] PCI: 0000:0a:00.0 reg 18 64bit mmio: [d1100000, d1100fff] PCI: 0000:0a:00.0 reg 20 64bit mmio: [d1000000, d100ffff] PCI: 0000:0a:00.0 reg 30 32bit mmio: [fffe0000, ffffffff] pci 0000:0a:00.0: supports D1 pci 0000:0a:00.0: supports D2 pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:0a:00.0: PME# disabled PCI: bridge 0000:00:07.0 io port: [2000, 2fff] PCI: bridge 0000:00:07.0 32bit mmio: [d1100000, d11fffff] PCI: bridge 0000:00:07.0 64bit mmio pref: [d1000000, d10fffff] pci 0000:00:14.4: transparent bridge PCI: bridge 0000:00:14.4 io port: [1000, 1fff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 32-bit timers, 14318180 Hz _OSC request fails ACPI: RTC can wake from S4 Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:08: ioport range 0x400-0x4cf has been reserved system 00:08: ioport range 0x4d0-0x4d1 has been reserved system 00:08: ioport range 0x4d6-0x4d6 has been reserved system 00:08: ioport range 0x680-0x6ff has been reserved system 00:08: ioport range 0x77a-0x77a has been reserved system 00:08: ioport range 0xc00-0xc01 has been reserved system 00:08: ioport range 0xc14-0xc14 has been reserved system 00:08: ioport range 0xc50-0xc52 has been reserved system 00:08: ioport range 0xc6c-0xc6c has been reserved system 00:08: ioport range 0xc6f-0xc6f has been reserved system 00:08: ioport range 0xcd0-0xcdb has been reserved system 00:09: iomem range 0xe0000-0xfffff could not be reserved system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 pci 0000:00:02.0: IO window: 0x7000-0x7fff pci 0000:00:02.0: MEM window: 0xd2400000-0xd24fffff pci 0000:00:02.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 pci 0000:00:04.0: IO window: 0x3000-0x6fff pci 0000:00:04.0: MEM window: 0xd1400000-0xd23fffff pci 0000:00:04.0: PREFETCH window: 0x000000d0000000-0x000000d0ffffff pci 0000:00:05.0: PCI bridge, secondary bus 0000:08 pci 0000:00:05.0: IO window: disabled pci 0000:00:05.0: MEM window: 0xd1300000-0xd13fffff pci 0000:00:05.0: PREFETCH window: disabled pci 0000:00:06.0: PCI bridge, secondary bus 0000:09 pci 0000:00:06.0: IO window: disabled pci 0000:00:06.0: MEM window: 0xd1200000-0xd12fffff pci 0000:00:06.0: PREFETCH window: disabled pci 0000:00:07.0: PCI bridge, secondary bus 0000:0a pci 0000:00:07.0: IO window: 0x2000-0x2fff pci 0000:00:07.0: MEM window: 0xd1100000-0xd11fffff pci 0000:00:07.0: PREFETCH window: 0x000000d1000000-0x000000d10fffff pci 0000:00:14.4: PCI bridge, secondary bus 0000:80 pci 0000:00:14.4: IO window: 0x1000-0x1fff pci 0000:00:14.4: MEM window: disabled pci 0000:00:14.4: PREFETCH window: disabled pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:04.0: setting latency timer to 64 pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:05.0: setting latency timer to 64 pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:06.0: setting latency timer to 64 pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:07.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [7000, 7fff] bus: 01 index 1 mmio: [d2400000, d24fffff] bus: 01 index 2 mmio: [c0000000, cfffffff] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 io port: [3000, 6fff] bus: 02 index 1 mmio: [d1400000, d23fffff] bus: 02 index 2 mmio: [d0000000, d0ffffff] bus: 02 index 3 mmio: [0, 0] bus: 08 index 0 mmio: [0, 0] bus: 08 index 1 mmio: [d1300000, d13fffff] bus: 08 index 2 mmio: [0, 0] bus: 08 index 3 mmio: [0, 0] bus: 09 index 0 mmio: [0, 0] bus: 09 index 1 mmio: [d1200000, d12fffff] bus: 09 index 2 mmio: [0, 0] bus: 09 index 3 mmio: [0, 0] bus: 0a index 0 io port: [2000, 2fff] bus: 0a index 1 mmio: [d1100000, d11fffff] bus: 0a index 2 mmio: [d1000000, d10fffff] bus: 0a index 3 mmio: [0, 0] bus: 80 index 0 io port: [1000, 1fff] bus: 80 index 1 mmio: [0, 0] bus: 80 index 2 mmio: [0, 0] bus: 80 index 3 io port: [0, ffff] bus: 80 index 4 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Simple Boot Flag at 0x44 set to 0x1 apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1236530951.820:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1699 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:14.2: MSI quirk detected; MSI enabled pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:02.0: setting latency timer to 64 pcieport-driver 0000:00:02.0: found MSI capability pci_express 0000:00:02.0:pcie00: allocate port service pcieport-driver 0000:00:04.0: setting latency timer to 64 pcieport-driver 0000:00:04.0: found MSI capability pci_express 0000:00:04.0:pcie00: allocate port service pci_express 0000:00:04.0:pcie02: allocate port service pcieport-driver 0000:00:05.0: setting latency timer to 64 pcieport-driver 0000:00:05.0: found MSI capability pci_express 0000:00:05.0:pcie00: allocate port service pcieport-driver 0000:00:06.0: setting latency timer to 64 pcieport-driver 0000:00:06.0: found MSI capability pci_express 0000:00:06.0:pcie00: allocate port service pcieport-driver 0000:00:07.0: setting latency timer to 64 pcieport-driver 0000:00:07.0: found MSI capability pci_express 0000:00:07.0:pcie00: allocate port service vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 1875k, total 16384k vesafb: mode is 800x600x16, linelength=1600, pages=16 vesafb: protected mode interface info at c000:a084 vesafb: pmi: set display start = c00ca126, set palette = c00ca1e4 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... Clocksource tsc unstable (delta = -97587604 ns) isapnp: No Plug & Play device found Serial: 8250/16550 driver4 ports, IRQ sharing enabled brd: module loaded PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered Using IPI No-Shortcut mode registered taskstats version 1 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 376k freed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: setting latency timer to 64 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xd2508500 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.14-server-1mnb ehci_hcd usb usb1: SerialNumber: 0000:00:12.2 ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: setting latency timer to 64 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xd2508400 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected usb 1-6: new high speed USB device using ehci_hcd and address 3 usb 1-6: configuration #1 chosen from 1 choice usb 1-6: New USB device found, idVendor=046d, idProduct=09b8 usb 1-6: New USB device strings: Mfr=0, Product=2, SerialNumber=0 usb 1-6: Product: HP Webcam usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27.14-server-1mnb ehci_hcd usb usb2: SerialNumber: 0000:00:13.2 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.0: setting latency timer to 64 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:12.0: irq 16, io mem 0xd2507000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected usb 2-5: new high speed USB device using ehci_hcd and address 2 usb 2-5: configuration #1 chosen from 1 choice usb 2-5: New USB device found, idVendor=07ca, idProduct=a309 usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-5: Product: A309 usb 2-5: Manufacturer: AVerMedia usb 2-5: SerialNumber: 301159900462000 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27.14-server-1mnb ohci_hcd usb usb3: SerialNumber: 0000:00:12.0 ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: setting latency timer to 64 ohci_hcd 0000:00:12.1: OHCI Host Controller ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.1: irq 16, io mem 0xd2506000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04751/0xa00000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27.14-server-1mnb ohci_hcd usb usb4: SerialNumber: 0000:00:12.1 ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: setting latency timer to 64 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xd2505000 input: SynPS/2 Synaptics TouchPad as /class/input/input1 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: OHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27.14-server-1mnb ohci_hcd usb usb5: SerialNumber: 0000:00:13.0 ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.1: setting latency timer to 64 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.1: irq 18, io mem 0xd2504000 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: OHCI Host Controller usb usb6: Manufacturer: Linux 2.6.27.14-server-1mnb ohci_hcd usb usb6: SerialNumber: 0000:00:13.1 USB Universal Host Controller Interface driver v3.0 usb 3-1: new low speed USB device using ohci_hcd and address 2 SCSI subsystem initialized usb 3-1: configuration #1 chosen from 1 choice usb 3-1: New USB device found, idVendor=15ca, idProduct=00c3 usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 usb 3-1: Product: USB Optical Mouse Driver 'sd' needs updating - please use bus_type methods No dock devices found. libata version 3.00 loaded. ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508100 irq 22 ata2: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508180 irq 22 ata3: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508200 irq 22 ata4: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508280 irq 22 ata5: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508300 irq 22 ata6: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508380 irq 22 ata1: softreset failed (device not ready) ata1: failed due to HW bug, retry pmp=0 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: FUJITSU MHZ2250BH G2, 8909, max UDMA/100 ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/100 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata4: softreset failed (device not ready) ata4: failed due to HW bug, retry pmp=0 ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T30L, GC04, max UDMA/100 ata4.00: configured for UDMA/100 ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2250B 8909 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > sd 0:0:0:0: [sda] Attached SCSI disk scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T30L GC04 PQ: 0 ANSI: 5 pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pata_atiixp 0000:00:14.1: setting latency timer to 64 scsi6 : pata_atiixp scsi7 : pata_atiixp ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8000 irq 14 ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8008 irq 15 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. TomoyoLinux Mandatory Access Control disabled by default. You need to install ccs-tools if you want to enable it. sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 3:0:0:0: Attached scsi generic sg1 type 5 ACPI: AC Adapter [ACAD] (on-line) input: Power Button (FF) as /class/input/input2 ACPI: Power Button (FF) [PWRF] processor ACPI0007:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) processor ACPI0007:01: registered as cooling_device1 input: Power Button (CM) as /class/input/input3 ACPI: Power Button (CM) [PWRB] input: Lid Switch as /class/input/input4 ACPI: Lid Switch [LID] sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:08:00.1: SDHCI controller found [197b:2382] (rev 0) sdhci-pci 0000:08:00.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 sdhci-pci 0000:08:00.1: setting latency timer to 64 mmc0: SDHCI controller on PCI [0000:08:00.1] using DMA sdhci-pci 0000:08:00.2: SDHCI controller found [197b:2381] (rev 0) sdhci-pci 0000:08:00.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17 sdhci-pci 0000:08:00.2: Refusing to bind to secondary interface. sdhci-pci 0000:08:00.2: PCI INT A disabled ohci1394 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ohci1394 0000:08:00.0: setting latency timer to 64 thermal LNXTHERM:01: registered as thermal_zone0 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[d1300000-d13007ff] Max Packet=[2048] IR/IT contexts=[4/4] Driver 'sr' needs updating - please use bus_type methods Linux video capture interface: v2.00 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 ACPI: Thermal Zone [TZ01] (65 C) ACPI: WMI: Mapper loaded uvcvideo: Found UVC 1.00 device HP Webcam (046d:09b8) input: HP Webcam as /class/input/input5 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 acpi device:05: registered as cooling_device2 input: Video Bus as /class/input/input6 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) proc_dir_entry 'video/VGA' already registered Pid: 1073, comm: modprobe Not tainted 2.6.27.14-server-1mnb #1 [] ? printk+0x18/0x1e [] proc_register+0x1a2/0x1d0 [] proc_mkdir_mode+0x33/0x50 [] proc_mkdir+0xf/0x20 [] acpi_video_bus_add+0x1a2/0xb1c [video] [] ? sysfs_do_create_link+0xa5/0x120 [] acpi_device_probe+0x42/0x84 [] driver_probe_device+0x82/0x1a0 [] __driver_attach+0x71/0x80 [] bus_for_each_dev+0x4b/0x70 [] ? acpi_device_remove+0x0/0x62 [] driver_attach+0x19/0x20 [] ? __driver_attach+0x0/0x80 [] bus_add_driver+0x1af/0x230 [] ? acpi_device_remove+0x0/0x62 [] driver_register+0x69/0x140 [] ? acpi_video_init+0x0/0x51 [video] [] ? proc_mkdir_mode+0x33/0x50 [] ? acpi_video_init+0x0/0x51 [video] [] acpi_bus_register_driver+0x3a/0x3d [] acpi_video_init+0x32/0x51 [video] [] do_one_initcall+0x2a/0x150 [] sys_init_module+0x96/0x1c0 [] ? sys_read+0x3d/0x70 [] sysenter_do_call+0x12/0x2f ======================= acpi device:0b: registered as cooling_device3 input: Video Bus as /class/input/input7 ACPI: Battery Slot [BAT0] (battery absent) ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) input: PC Speaker as /class/input/input8 jmb38x_ms 0000:08:00.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17 jmb38x_ms 0000:08:00.3: setting latency timer to 64 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:0a:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 r8169 0000:0a:00.0: setting latency timer to 64 eth0: RTL8168c/8111c at 0xf8bae000, 00:1e:ec:9f:4d:d3, XID 3c2000c0 IRQ 218 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, hpet irqs usbcore: registered new interface driver hiddev input: USB Optical Mouse as /class/input/input9 input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:12.0-1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver ath5k_pci 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ath5k_pci 0000:09:00.0: setting latency timer to 64 ath5k_pci 0000:09:00.0: registered as 'phy0' ath5k phy0: Support for RF2425 is under development. phy0: Selected rate control algorithm 'pid' ieee1394: Host added: ID:BUS[0-00:1023] GUID[883f0200b11140d7] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 hda_intel: enable_msi set to 0x1 for device 103c:30fc HDA Intel 0000:00:14.2: setting latency timer to 64 input: HDA Digital PCBeep as /class/input/input10 HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 hda_intel: enable_msi set to 0x1 for device 103c:30fc HDA Intel 0000:01:00.1: setting latency timer to 64 Non-volatile memory driver v1.2 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com EXT3 FS on sda5, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. fuse init (API version 7.9) loop: module loaded Adding 5172888k swap on /dev/sda6. Priority:-1 extents:1 across:5172888k QEMU Accelerator Module version 1.4.0, Copyright (c) 2005-2008 Fabrice Bellard KQEMU installed, max_locked_mem=2072764kB. NET: Registered protocol family 10 lo: Disabled Privacy Extensions kvm: disabled by bios Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast r8169: eth0: link up r8169: eth0: link up Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 Bridge firewalling registered Linux agpgart interface v0.103 fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. Symbol init_mm is marked as UNUSED, however this module is using it. This symbol will go away in the future. Please evalute if this is the right api to use and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion. [fglrx] Maximum main memory to use for locked dma buffers: 3884 MBytes. [fglrx] vendor: 1002 device: 95c4 count: 1 [fglrx] ioport: bar 1, base 0x7000, size: 0x100 pci 0000:01:00.0: power state changed by ACPI to D0 pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:01:00.0: setting latency timer to 64 [fglrx] Pat entry 2 is already configured [fglrx] PAT is enabled successfully! [fglrx] module loaded - fglrx 8.52.3 [Aug 1 2008] with 1 minors ADDRCONF(NETDEV_UP): wlan0: link is not ready NET: Registered protocol family 17 wlan0: authenticate with AP 00:17:33:58:3a:18 wlan0: authenticated wlan0: associate with AP 00:17:33:58:3a:18 wlan0: RX AssocResp from 00:17:33:58:3a:18 (capab=0x401 status=0 aid=1) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [fglrx] Reserved FB block: Shared offset:0, size:1000000 [fglrx] Reserved FB block: Unshared offset:ff7a000, size:80000 [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000 hda-intel: Invalid position buffer, using LPIB read method instead. hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. ADDRCONF(NETDEV_UP): wlan0: link is not ready ADDRCONF(NETDEV_UP): wlan0: link is not ready