Linux version 2.6.17.8-rik (root@notebook) (gcc version 4.1.2 20060613 (prerelease) (Debian 4.1.1-5)) #1 Thu Aug 17 13:02:25 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ddf0000 (usable) BIOS-e820: 000000001ddf0000 - 000000001ddfa000 (ACPI data) BIOS-e820: 000000001ddfa000 - 000000001de00000 (ACPI NVS) BIOS-e820: 000000001de00000 - 0000000020000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 477MB LOWMEM available. On node 0 totalpages: 122352 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 118256 pages, LIFO batch:31 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f8150 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1ddf64c2 ACPI: FADT (v001 SiS 661MX 0x06040000 PTL 0x00000001) @ 0x1ddf9f46 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x1ddf9fba ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x1ddf64f2 ACPI: DSDT (v001 PTLTD 661MX 0x06040000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x8008 Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) Built 1 zonelists Kernel command line: root=/dev/hda5 resume2=/dev/hda7 ro vga=771 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 1500.278 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 478048k/489408k available (1437k kernel code, 10752k reserved, 526k data, 132k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3002.32 BogoMIPS (lpj=6004653) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Celeron(R) M processor 1.50GHz stepping 08 Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 0k freed ACPI: setting ELCR to 0800 (from 0e80) checking if image is initramfs... it is Freeing initrd memory: 4167k freed Time: 14:32:34 Date: 07/17/106 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd786, last bus=1 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Uncovering SIS963 that hid as a SIS503 (compatible=0) Enabling SiS 96x SMBus. PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5 Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 9 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:04: ioport range 0x8000-0x807f could not be reserved pnp: 00:04: ioport range 0x8080-0x80ff has been reserved pnp: 00:04: ioport range 0x8100-0x811f has been reserved pnp: 00:04: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:04: ioport range 0xfe00-0xfe00 has been reserved PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0 PCI: Bridge: 0000:00:01.0 IO window: 9000-9fff MEM window: e2100000-e21fffff PREFETCH window: e8000000-efffffff PCI: Bus 2, cardbus bridge: 0000:00:06.0 IO window: 00002400-000024ff IO window: 00002800-000028ff PREFETCH window: 30000000-31ffffff MEM window: 32000000-33ffffff PCI: Enabling device 0000:00:06.0 (0000 -> 0003) ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered audit: initializing netlink socket (disabled) audit(1155825155.496:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered vesafb: framebuffer at 0xe8000000, mapped to 0xce880000, using 937k, total 16384k vesafb: mode is 800x600x8, linelength=800, pages=15 vesafb: protected mode interface info at cbe7:0004 vesafb: scrolling: redraw vesafb: Pseudocolor: size=6:6:6:6, shift=0:0:0:0 Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled PCI: Enabling device 0000:00:02.6 (0000 -> 0001) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI Interrupt 0000:00:02.6[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Using IPI Shortcut mode Suspend2 Core. Suspend2 Compression Driver loading. Suspend2 Encryption Driver loading. Suspend2 Swap Writer loading. ACPI wakeup devices: PCI0 LAN MODM KBC USB0 USB1 USB2 USB3 ACPI: (supports S0 S3 S4 S5) Magic number: 2:252:536 Freeing unused kernel memory: 132k freed input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THRM] (66 C) sis900.c: v1.08.09 Sep. 19 2005 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13. 0000:00:04.0: Using transceiver found at address 13 as default eth0: SiS 900 PCI Fast Ethernet at 0x2000, IRQ 10, 00:c0:9f:89:0f:9b. usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:03.3[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:03.3: EHCI Host Controller ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:03.3: irq 10, io mem 0xe2002000 ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9 ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:03.0: irq 9, io mem 0xe2000000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:03.1[B] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:03.1: irq 11, io mem 0xe2001000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected SIS5513: IDE controller at PCI slot 0000:00:02.5 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7 PCI: setting IRQ 7 as level-triggered ACPI: PCI Interrupt 0000:00:02.5[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7 SIS5513: chipset revision 0 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... usb 3-2: new low speed USB device using ohci_hcd and address 2 hda: HTS424040M9AT00, ATA DISK drive usb 3-2: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: Logitech USB-PS/2 Optical Mouse as /class/input/input1 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.1-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: UJDA760 DVD/CDRW, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 78140160 sectors (40007 MB) w/1739KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 hda7 > hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. input: PC Speaker as /class/input/input2 ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 Yenta: CardBus bridge found at 0000:00:06.0 [1025:0082] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:06.0, mfunc 0x00521d22, devctl 0x64 ts: Compaq touchscreen protocol output Yenta: ISA IRQ mask 0x0078, PCI irq 10 Socket status: 30000006 mice: PS/2 mouse device common for all mice sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected SiS 661 chipset agpgart: AGP aperture is 32M @ 0xe0000000 ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 cs: IO port probe 0x100-0x4ff: excluding 0x480-0x48f cs: IO port probe 0x800-0x8ff: clean. cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff cs: IO port probe 0xa00-0xaff: clean. Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000 input: SynPS/2 Synaptics TouchPad as /class/input/input3 intel8x0_measure_ac97_clock: measured 55456 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt 0000:00:02.6[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 MC'97 1 converters and GPIO not ready (0xff00) Intel 810 + AC97 Audio, version 1.01, 13:28:41 Aug 17 2006 Unable to find swap-space signature EXT3 FS on hda5, internal journal device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 755012k swap on /dev/hda7. Priority:-1 extents:1 across:755012k pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. eth0: Media Link On 100mbps full-duplex NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present