>>> Messages generated by process 20252 on 2009-02-13 01:23:51 CET for package sys-kernel/gentoo-sources-2.6.27-r8: LOG: postinst If you are upgrading from a previous kernel, you may be interested in the following document: - General upgrade guide: http://www.gentoo.org/doc/en/kernel-upgrade.xml >>> Messages generated by process 3109 on 2009-02-13 01:40:26 CET for package app-admin/metalog-0.8-r1: WARN: postinst The default metalog.conf file has been moved from /etc/metalog/metalog.conf to just /etc/metalog.conf. If you had a standard setup, the file has been moved for you. >>> Messages generated by process 6576 on 2009-02-13 01:40:39 CET for package sys-process/cronbase-0.3.2-r1: LOG: postinst Portage doesn't enforce proper permissions on already existing directories (bug 141619). Appropriate permissions are now being set on //etc/cron.{hourly,daily,weekly,monthly}, //var/spool/cron/ and //var/spool/cron/lastrun/ (see bug 182998) >>> Messages generated by process 12062 on 2009-02-13 01:41:55 CET for package net-misc/dhcpcd-4.0.7: LOG: unpack dhcpcd-3 command line support enabled LOG: postinst You have installed dhcpcd with zeroconf support. This means that it will always obtain an IP address even if no DHCP server can be contacted, which will break any existing failover support you may have configured in your net configuration. This behaviour can be controlled with the -L flag. See the dhcpcd man page for more details. >>> Messages generated by process 13237 on 2009-02-13 01:42:47 CET for package sys-boot/grub-0.97-r6: LOG: preinst To avoid automounting and autoinstalling with /boot, just export the DONT_MOUNT_BOOT variable. LOG: postinst To interactively install grub files to another device such as a USB stick, just run the following and specify the directory as prompted: emerge --config =grub-0.97-r6 Alternately, you can export GRUB_ALT_INSTALLDIR=/path/to/use to tell grub where to install in a non-interactive way. >>> Messages generated by process 15772 on 2009-02-13 04:16:19 CET for package dev-libs/expat-2.0.1-r1: WARN: postinst Please note that the soname of the library changed! If you are upgrading from a previous version you need to fix dynamic linking inconsistencies by executing: revdep-rebuild -X --library libexpat.so.0 >>> Messages generated by process 15772 on 2009-02-13 04:17:31 CET for package sys-apps/sandbox-1.2.18.1-r2: WARN: compile If configure fails with a 'cannot run C compiled programs' error, try this: FEATURES=-sandbox emerge sandbox >>> Messages generated by process 15772 on 2009-02-13 04:18:45 CET for package sys-kernel/linux-headers-2.6.27-r2: LOG: postinst Kernel headers are usually only used when recompiling your system libc, as such, following the installation of newer headers, it is advised that you re-merge your system libc. Failure to do so will cause your system libc to not make use of newer features present in the updated kernel headers. >>> Messages generated by process 15772 on 2009-02-13 04:20:25 CET for package sys-apps/baselayout-1.12.11.1: LOG: postinst The default setting for wiping /tmp has been set to 'yes'. Consult /etc/conf.d/bootmisc for more information. >>> Messages generated by process 15772 on 2009-02-13 04:20:40 CET for package sys-fs/udev-124-r1: LOG: postinst persistent-net does assigning fixed names to network devices. If you have problems with the persistent-net rules, just delete the rules file rm /etc/udev/rules.d/70-persistent-net.rules and then reboot. This may however number your devices in a different way than they are now. WARN: postinst If you build an initramfs including udev, then please make sure that the /sbin/udevadm binary gets included, as the helper apps udevinfo, udevtrigger, ... are now only symlinks to udevadm. mount options for directory /dev are no longer set in /etc/udev/udev.conf, but in /etc/fstab as for other directories. LOG: postinst For more information on udev on Gentoo, writing udev rules, and fixing known issues visit: http://www.gentoo.org/doc/en/udev-guide.xml >>> Messages generated by process 15772 on 2009-02-13 04:34:44 CET for package sys-apps/util-linux-2.14.1: WARN: postinst USE=crypt has been changed to USE=loop-aes. If you need support for it, make sure to update your USE accordingly. >>> Messages generated by process 15772 on 2009-02-13 04:46:31 CET for package sys-devel/gcc-4.1.2: WARN: postinst If you have issues with packages unable to locate libstdc++.la, then try running 'fix_libtool_files.sh' on the old gcc versions. >>> Messages generated by process 15772 on 2009-02-13 05:01:35 CET for package sys-apps/coreutils-6.10-r2: WARN: postinst Make sure you run 'hash -r' in your active shells. >>> Messages generated by process 15772 on 2009-02-13 05:08:52 CET for package dev-libs/openssl-0.9.8j: WARN: postinst Due to the way openssl is architected, you cannot switch between optimized versions without breaking ABI. The default i686 0.9.8 ABI was an unoptimized version with horrible performance. This version uses the optimized ABI. If you experience segfaults when using ssl apps (like openssh), just re-emerge the offending package. >>> Messages generated by process 15772 on 2009-02-13 05:10:34 CET for package dev-lang/python-2.5.2-r7: WARN: postinst If you have just upgraded from an older version of python you will need to run: /usr/sbin/python-updater This will automatically rebuild all the python dependent modules to run with python-2.5. Your original Python is still installed and can be accessed via /usr/bin/python2.x. >>> Messages generated by process 15772 on 2009-02-13 05:10:54 CET for package net-misc/wget-1.11.3: WARN: preinst The /etc/wget/wgetrc file has been relocated to /etc/wgetrc >>> Messages generated by process 15772 on 2009-02-13 05:14:42 CET for package sys-apps/shadow-4.1.2.2: WARN: postinst Running 'grpck' returned errors. Please run it by hand, and then run 'grpconv' afterwards! >>> Messages generated by process 15772 on 2009-02-13 05:15:31 CET for package sys-apps/busybox-1.12.2-r1: WARN: unpack Could not locate user configfile, so we will save a default one LOG: install Your configuration for sys-apps/busybox-1.12.2-r1 has been saved in /etc/portage/savedconfig/sys-apps/busybox-1.12.2-r1 for your editing pleasure. You can edit these files by hand and remerge this package with USE=savedconfig to customise the configuration. You can rename this file/directory to one of the following for its configuration to apply to multiple versions: ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/ [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}] >>> Messages generated by process 15772 on 2009-02-13 05:16:20 CET for package net-misc/openssh-5.1_p1-r1: WARN: postinst Remember to merge your config files in /etc/ssh/ and then restart sshd: '/etc/init.d/sshd restart'. Please be aware users need a valid shell in /etc/passwd in order to be allowed to login. >>> Messages generated by process 28051 on 2009-02-13 05:18:55 CET for package dev-libs/expat-2.0.1-r1: WARN: postinst Please note that the soname of the library changed! If you are upgrading from a previous version you need to fix dynamic linking inconsistencies by executing: revdep-rebuild -X --library libexpat.so.0 >>> Messages generated by process 28051 on 2009-02-13 05:20:01 CET for package sys-apps/sandbox-1.2.18.1-r2: WARN: compile If configure fails with a 'cannot run C compiled programs' error, try this: FEATURES=-sandbox emerge sandbox >>> Messages generated by process 28051 on 2009-02-13 05:21:05 CET for package sys-kernel/linux-headers-2.6.27-r2: LOG: postinst Kernel headers are usually only used when recompiling your system libc, as such, following the installation of newer headers, it is advised that you re-merge your system libc. Failure to do so will cause your system libc to not make use of newer features present in the updated kernel headers. >>> Messages generated by process 28051 on 2009-02-13 05:22:45 CET for package sys-apps/baselayout-1.12.11.1: LOG: postinst The default setting for wiping /tmp has been set to 'yes'. Consult /etc/conf.d/bootmisc for more information. >>> Messages generated by process 28051 on 2009-02-13 05:22:59 CET for package sys-fs/udev-124-r1: LOG: postinst persistent-net does assigning fixed names to network devices. If you have problems with the persistent-net rules, just delete the rules file rm /etc/udev/rules.d/70-persistent-net.rules and then reboot. This may however number your devices in a different way than they are now. WARN: postinst If you build an initramfs including udev, then please make sure that the /sbin/udevadm binary gets included, as the helper apps udevinfo, udevtrigger, ... are now only symlinks to udevadm. mount options for directory /dev are no longer set in /etc/udev/udev.conf, but in /etc/fstab as for other directories. LOG: postinst For more information on udev on Gentoo, writing udev rules, and fixing known issues visit: http://www.gentoo.org/doc/en/udev-guide.xml >>> Messages generated by process 28051 on 2009-02-13 05:37:22 CET for package sys-apps/util-linux-2.14.1: WARN: postinst USE=crypt has been changed to USE=loop-aes. If you need support for it, make sure to update your USE accordingly. >>> Messages generated by process 28051 on 2009-02-13 05:49:09 CET for package sys-devel/gcc-4.1.2: WARN: postinst If you have issues with packages unable to locate libstdc++.la, then try running 'fix_libtool_files.sh' on the old gcc versions. >>> Messages generated by process 28051 on 2009-02-13 06:04:09 CET for package sys-apps/coreutils-6.10-r2: WARN: postinst Make sure you run 'hash -r' in your active shells. >>> Messages generated by process 28051 on 2009-02-13 06:11:26 CET for package dev-libs/openssl-0.9.8j: WARN: postinst Due to the way openssl is architected, you cannot switch between optimized versions without breaking ABI. The default i686 0.9.8 ABI was an unoptimized version with horrible performance. This version uses the optimized ABI. If you experience segfaults when using ssl apps (like openssh), just re-emerge the offending package. >>> Messages generated by process 28051 on 2009-02-13 06:13:08 CET for package dev-lang/python-2.5.2-r7: WARN: postinst If you have just upgraded from an older version of python you will need to run: /usr/sbin/python-updater This will automatically rebuild all the python dependent modules to run with python-2.5. Your original Python is still installed and can be accessed via /usr/bin/python2.x. >>> Messages generated by process 28051 on 2009-02-13 06:13:27 CET for package net-misc/wget-1.11.3: WARN: preinst The /etc/wget/wgetrc file has been relocated to /etc/wgetrc >>> Messages generated by process 28051 on 2009-02-13 06:17:17 CET for package sys-apps/shadow-4.1.2.2: WARN: postinst Running 'grpck' returned errors. Please run it by hand, and then run 'grpconv' afterwards! >>> Messages generated by process 28051 on 2009-02-13 06:18:06 CET for package sys-apps/busybox-1.12.2-r1: WARN: unpack Could not locate user configfile, so we will save a default one LOG: install Your configuration for sys-apps/busybox-1.12.2-r1 has been saved in /etc/portage/savedconfig/sys-apps/busybox-1.12.2-r1 for your editing pleasure. You can edit these files by hand and remerge this package with USE=savedconfig to customise the configuration. You can rename this file/directory to one of the following for its configuration to apply to multiple versions: ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/ [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}] >>> Messages generated by process 28051 on 2009-02-13 06:18:54 CET for package net-misc/openssh-5.1_p1-r1: WARN: postinst Remember to merge your config files in /etc/ssh/ and then restart sshd: '/etc/init.d/sshd restart'. Please be aware users need a valid shell in /etc/passwd in order to be allowed to login. >>> Messages generated by process 9317 on 2009-02-13 09:54:43 CET for package app-misc/mc-4.6.1-r4: LOG: postinst Add the following line to your ~/.bashrc to allow mc to chdir to its latest working dir at exit # Midnight Commander chdir enhancement if [ -f /usr/share/mc/mc.gentoo ]; then . /usr/share/mc/mc.gentoo fi >>> Messages generated by process 22206 on 2009-02-13 10:10:58 CET for package dev-util/ccache-2.4-r7: LOG: postinst To use ccache with **non-Portage** C compiling, add /usr/lib/ccache/bin to the beginning of your path, before /usr/bin. Portage 2.0.46-r11+ will automatically take advantage of ccache with no additional steps. If this is your first install of ccache, type something like this to set a maximum cache size of 2GB: # ccache -M 2G >>> Messages generated by process 24901 on 2009-02-13 10:14:57 CET for package net-nds/openldap-2.3.43: LOG: postinst Getting started using OpenLDAP? There is some documentation available: Gentoo Guide to OpenLDAP Authentication (http://www.gentoo.org/doc/en/ldap-howto.xml) An example file for tuning BDB backends with openldap is: /usr/share/doc/openldap-2.3.43/DB_CONFIG.fast.example.gz >>> Messages generated by process 24901 on 2009-02-13 10:21:42 CET for package dev-lang/python-2.5.2-r7: WARN: postinst If you have just upgraded from an older version of python you will need to run: /usr/sbin/python-updater This will automatically rebuild all the python dependent modules to run with python-2.5. Your original Python is still installed and can be accessed via /usr/bin/python2.x. >>> Messages generated by process 24901 on 2009-02-13 10:23:52 CET for package net-misc/wget-1.11.3: WARN: preinst The /etc/wget/wgetrc file has been relocated to /etc/wgetrc >>> Messages generated by process 24901 on 2009-02-13 10:36:37 CET for package sys-devel/gcc-4.1.2: WARN: postinst If you have issues with packages unable to locate libstdc++.la, then try running 'fix_libtool_files.sh' on the old gcc versions. >>> Messages generated by process 24901 on 2009-02-13 10:37:32 CET for package net-misc/openssh-5.1_p1-r1: WARN: postinst Remember to merge your config files in /etc/ssh/ and then restart sshd: '/etc/init.d/sshd restart'. Please be aware users need a valid shell in /etc/passwd in order to be allowed to login. >>> Messages generated by process 4397 on 2009-02-13 10:51:52 CET for package app-misc/mc-4.6.1-r4: LOG: postinst Add the following line to your ~/.bashrc to allow mc to chdir to its latest working dir at exit # Midnight Commander chdir enhancement if [ -f /usr/share/mc/mc.gentoo ]; then . /usr/share/mc/mc.gentoo fi >>> Messages generated by process 27229 on 2009-02-13 10:54:58 CET for package media-libs/freetype-2.3.7-r1: WARN: postinst After upgrading to freetype-2.3.5, it is necessary to rebuild libXfont to avoid build errors in some packages. LOG: postinst The utilities and demos previously bundled with freetype are now optional. Enable the utils USE flag if you would like them to be installed. >>> Messages generated by process 27229 on 2009-02-13 10:56:10 CET for package sys-apps/dbus-1.2.3-r1: LOG: postinst To start the D-Bus system-wide messagebus by default you should add it to the default runlevel : `rc-update add dbus default` Some applications require a session bus in addition to the system bus. Please see `man dbus-launch` for more information. WARN: postinst You MUST run 'revdep-rebuild' after emerging this package LOG: postinst WARN: postinst If you are currently running X with the hal useflag enabled restarting the dbus service WILL restart X as well LOG: postinst WARN: postinst You must restart D-Bus `/etc/init.d/dbus restart` to run the new version of the daemon. For many people, this means exiting X as well. >>> Messages generated by process 27229 on 2009-02-13 10:57:41 CET for package x11-libs/libXi-1.1.3: WARN: postinst Some special keys and keyboard layouts may stop working. To fix them, recompile xorg-server. >>> Messages generated by process 27229 on 2009-02-13 11:03:04 CET for package dev-db/sqlite-3.6.6.2: LOG: postinst sqlite-3.6.X is not totally backwards compatible, see http://www.sqlite.org/releaselog/3_6_0.html for full details. >>> Messages generated by process 27229 on 2009-02-13 11:07:38 CET for package dev-libs/libsigc++-2.2.3: WARN: postinst To allow parallel installation of sigc++-1.0, sigc++-1.2, and sigc++2.0 the header files are now installed in a version specific subdirectory. Be sure to unmerge any libsigc++ versions < 1.0.4 that you may have previously installed. >>> Messages generated by process 27229 on 2009-02-13 11:07:50 CET for package sys-apps/pciutils-3.0.2: LOG: install Providing a backwards compatibility non-compressed pci.ids >>> Messages generated by process 27229 on 2009-02-13 11:09:52 CET for package sys-fs/device-mapper-1.02.24-r1: LOG: postinst device-mapper volumes are no longer automatically created for baselayout-2 users. If you are using baselayout-2, be sure to run: # rc-update add device-mapper boot >>> Messages generated by process 27229 on 2009-02-13 11:10:04 CET for package app-text/libpaper-1.1.23: LOG: postinst run "paperconfig -p letter" as root to use letter-pagesizes or paperconf with normal user privileges. >>> Messages generated by process 27229 on 2009-02-13 11:20:02 CET for package dev-libs/libcdio-0.80: WARN: postinst If you've upgraded from a previous version of libcdio, you may need to re-emerge packages that linked against libcdio (vlc, vcdimager and more) by running: revdep-rebuild >>> Messages generated by process 27229 on 2009-02-13 11:26:01 CET for package media-libs/alsa-lib-1.0.17a: WARN: postinst Starting from alsa 1.0.11_rc3 the configuration for dmix is changed. Leaving around old asound.conf or ~/.asoundrc might make all apps using ALSA output crash. Note that dmix output is enabled by default on the 'default' device since ALSA 1.0.9. LOG: postinst Please try in-kernel ALSA drivers instead of the alsa-drivers ebuild. If alsa-drivers works for you where a recent kernel does not, we want to know about this. Our e-mail address is alsa-bugs@gentoo.org However, if you notice no sound output or instability, please try to upgrade your kernel to a newer version first. >>> Messages generated by process 27229 on 2009-02-13 11:26:43 CET for package media-libs/tiff-3.8.2-r4: LOG: postinst JBIG support is intended for Hylafax fax compression, so we really need more feedback in other areas (most testing has been done with fax). Be sure to recompile anything linked against tiff if you rebuild it with jbig support. >>> Messages generated by process 27229 on 2009-02-13 11:32:49 CET for package dev-libs/cyrus-sasl-2.1.22-r2: WARN: setup You have both the 'gdbm' and 'berkdb' USE flags enabled. Will default to GNU DB as your SASLdb database backend. If you want to build with BerkeleyDB support, hit Control-C now, change your USE flags -gdbm and emerge again. Waiting 10 seconds before starting ... (Control-C to abort) ... >>> Messages generated by process 27229 on 2009-02-13 11:43:22 CET for package x11-misc/shared-mime-info-0.51: LOG: postinst The database format has changed between 0.30 and 0.40. You may need to update all your local databases and caches. To do so, please run the following commands: (for each user) $ update-mime-database ~/.local/share/mime/ (as root) # update-mime-database /usr/local/share/mime/ >>> Messages generated by process 27229 on 2009-02-13 11:46:57 CET for package sys-auth/consolekit-0.2.3: WARN: postinst You need to restart ConsoleKit to get the new features. This can be done with /etc/init.d/consolekit restart but make sure you do this and then restart your session otherwise you will get access denied for certain actions >>> Messages generated by process 27229 on 2009-02-13 11:49:12 CET for package sys-fs/cryptsetup-1.0.5-r1: WARN: setup CONFIG_DM_CRYPT: is not set (required for cryptsetup) Please check to make sure these options are set correctly. Failure to do so may cause unexpected problems. WARN: postinst This ebuild introduces a new set of scripts and configuration than the last version. If you are currently using /etc/conf.d/cryptfs then you *MUST* copy your old file to: /etc/conf.d/dmcrypt Or your encrypted partitions will *NOT* work. LOG: postinst Please see the example for configuring a LUKS mountpoint in /etc/conf.d/dmcrypt If you are using baselayout-2 then please do: rc-update add dmcrypt boot This version introduces a command line arguement 'key_timeout'. If you want the search for the removable key device to timeout after 10 seconds add the following to your bootloader config: key_timeout=10 A timeout of 0 will mean it will wait indefinitely. >>> Messages generated by process 27229 on 2009-02-13 11:49:29 CET for package app-admin/sudo-1.7.0: WARN: postinst sudo uses the /etc/ldap.conf.sudo file for ldap configuration. >>> Messages generated by process 27229 on 2009-02-13 11:54:04 CET for package x11-libs/libXdamage-1.1.1: WARN: postinst Compositing managers may stop working. To fix them, recompile xorg-server. >>> Messages generated by process 27229 on 2009-02-13 11:55:14 CET for package x11-libs/libxklavier-3.6: WARN: postinst Please note that the soname of the library changed! If you are upgrading from a version prior to 3.4 you need to fix dynamic linking inconsistencies by executing: revdep-rebuild -X --library libxklavier.so.11 >>> Messages generated by process 27229 on 2009-02-13 11:57:13 CET for package media-libs/gst-plugins-good-0.10.8-r1: LOG: postinst The Gstreamer plugins setup has changed quite a bit on Gentoo, applications now should provide the basic plugins needed. The new seperate plugins are all named 'gst-plugins-'. To get a listing of currently available plugins execute 'emerge -s gst-plugins-'. In most cases it shouldn't be needed though to emerge extra plugins. >>> Messages generated by process 27229 on 2009-02-13 11:58:19 CET for package x11-misc/xdg-utils-1.0.2-r1: LOG: postinst Install >=x11-libs/gtk+-2 if you need command gtk-update-icon-cache. >>> Messages generated by process 27229 on 2009-02-13 11:59:22 CET for package media-libs/gst-plugins-ugly-0.10.8: LOG: postinst The Gstreamer plugins setup has changed quite a bit on Gentoo, applications now should provide the basic plugins needed. The new seperate plugins are all named 'gst-plugins-'. To get a listing of currently available plugins execute 'emerge -s gst-plugins-'. In most cases it shouldn't be needed though to emerge extra plugins. >>> Messages generated by process 27229 on 2009-02-13 12:04:03 CET for package app-cdr/dvd+rw-tools-7.1: LOG: postinst When you run growisofs if you receive: unable to anonymously mmap 33554432: Resource temporarily unavailable error message please run 'ulimit -l unlimited' >>> Messages generated by process 27229 on 2009-02-13 12:18:50 CET for package media-libs/fontconfig-2.6.0-r2: WARN: postinst Please make fontconfig configuration changes in /etc/fonts/conf.d/ and NOT to /etc/fonts/fonts.conf, as it will be replaced! >>> Messages generated by process 27229 on 2009-02-13 12:29:53 CET for package x11-base/xorg-server-1.3.0.0-r6: WARN: setup Forcing on xorg-x11 for new enough glxtokens.h... WARN: postinst Users of reduced blanking now need: Option "ReducedBlanking" In the relevant Monitor section(s). Make sure your reduced blanking modelines are safe! >>> Messages generated by process 27229 on 2009-02-13 12:30:13 CET for package x11-drivers/xf86-video-openchrome-0.2.903: LOG: postinst Supported chipsets: CLE266 (VT3122) KM400/P4M800 (VT3205) K8M800 (VT3204) PM800/PM880/CN400 (VT3259) VM800/CN700/P4M800Pro (VT3314) CX700 (VT3324) P4M890 (VT3327) K8M890 (VT3336) P4M900/VN896 (VT3364) The driver name is 'openchrome', and this is what you need to use in your xorg.conf now (instead of 'via'). See the ChangeLog and release notes for more information. >>> Messages generated by process 27229 on 2009-02-13 12:32:45 CET for package x11-drivers/xf86-video-savage-2.1.2-r1: LOG: postinst Direct rendering with kernels <=2.6.18 requires that you use x11-drm 20060608 or newer rather than the DRM in the kernel. >>> Messages generated by process 27229 on 2009-02-13 12:36:47 CET for package sys-apps/hal-0.5.11-r1: LOG: install Migrating xorg.conf Core Keyboard configuration to HAL FDI file WARN: install Failed to migrate your keyboard configuration. LOG: postinst The HAL daemon needs to be running for certain applications to work. Suggested is to add the init script to your start-up scripts, this should be done like this : `rc-update add hald default` Looking for automounting support? Add yourself to the plugdev group IF you have additional applications which consume ACPI events, you should consider installing acpid to allow applications to share ACPI events. If you wish to use a non US layout, you may do so by executing: setxkbmap or by utilizing your Desktop Environment's Keyboard Layout Settings mechanism. Under GNOME, this is gnome-keyboard-properties, and under KDE it is kxkb. In order have suspend/hibernate function with HAL or apps that use HAL (such as gnome-power-manager), you should build HAL with the laptop useflag which will install pm-utils. X Input Hotplugging (if you build xorg-server with the HAL useflag) reads user specific configuration from /etc/hal/fdi/policy/. You should remove the Input sections from your xorg.conf once you have migrated the rules to a HAL fdi file. >>> Messages generated by process 27229 on 2009-02-13 12:41:06 CET for package x11-libs/qt-core-4.4.2: WARN: postinst After a rebuild or upgrade of Qt, it can happen that Qt plugins (such as Qt and KDE styles and widgets) can no longer be loaded. In this situation you should recompile the packages providing these plugins. Also, make sure you compile the Qt packages, and the packages that depend on it, with the same GCC version and the same USE flag settings (especially the debug flag). Packages that typically need to be recompiled are kdelibs from KDE4, any additional KDE4/Qt4 styles, qscintilla and PyQt4. Before filing a bug report, make sure all your Qt4 packages are up-to-date and built with the same configuration. For more information, see http://doc.trolltech.com/4.4/plugins-howto.html >>> Messages generated by process 27229 on 2009-02-13 12:41:39 CET for package x11-libs/qt-test-4.4.2: WARN: postinst After a rebuild or upgrade of Qt, it can happen that Qt plugins (such as Qt and KDE styles and widgets) can no longer be loaded. In this situation you should recompile the packages providing these plugins. Also, make sure you compile the Qt packages, and the packages that depend on it, with the same GCC version and the same USE flag settings (especially the debug flag). Packages that typically need to be recompiled are kdelibs from KDE4, any additional KDE4/Qt4 styles, qscintilla and PyQt4. Before filing a bug report, make sure all your Qt4 packages are up-to-date and built with the same configuration. For more information, see http://doc.trolltech.com/4.4/plugins-howto.html >>> Messages generated by process 27229 on 2009-02-13 12:42:32 CET for package x11-libs/qt-dbus-4.4.2: WARN: postinst After a rebuild or upgrade of Qt, it can happen that Qt plugins (such as Qt and KDE styles and widgets) can no longer be loaded. In this situation you should recompile the packages providing these plugins. Also, make sure you compile the Qt packages, and the packages that depend on it, with the same GCC version and the same USE flag settings (especially the debug flag). Packages that typically need to be recompiled are kdelibs from KDE4, any additional KDE4/Qt4 styles, qscintilla and PyQt4. Before filing a bug report, make sure all your Qt4 packages are up-to-date and built with the same configuration. For more information, see http://doc.trolltech.com/4.4/plugins-howto.html >>> Messages generated by process 27229 on 2009-02-13 12:43:45 CET for package x11-libs/qt-script-4.4.2: WARN: postinst After a rebuild or upgrade of Qt, it can happen that Qt plugins (such as Qt and KDE styles and widgets) can no longer be loaded. In this situation you should recompile the packages providing these plugins. Also, make sure you compile the Qt packages, and the packages that depend on it, with the same GCC version and the same USE flag settings (especially the debug flag). Packages that typically need to be recompiled are kdelibs from KDE4, any additional KDE4/Qt4 styles, qscintilla and PyQt4. Before filing a bug report, make sure all your Qt4 packages are up-to-date and built with the same configuration. For more information, see http://doc.trolltech.com/4.4/plugins-howto.html >>> Messages generated by process 27229 on 2009-02-13 12:44:27 CET for package x11-libs/qt-sql-4.4.2: WARN: postinst After a rebuild or upgrade of Qt, it can happen that Qt plugins (such as Qt and KDE styles and widgets) can no longer be loaded. In this situation you should recompile the packages providing these plugins. Also, make sure you compile the Qt packages, and the packages that depend on it, with the same GCC version and the same USE flag settings (especially the debug flag). Packages that typically need to be recompiled are kdelibs from KDE4, any additional KDE4/Qt4 styles, qscintilla and PyQt4. Before filing a bug report, make sure all your Qt4 packages are up-to-date and built with the same configuration. For more information, see http://doc.trolltech.com/4.4/plugins-howto.html >>> Messages generated by process 27229 on 2009-02-13 12:45:23 CET for package net-print/cups-1.3.9-r1: LOG: postinst For information about installing a printer and general cups setup take a look at: http://www.gentoo.org/doc/en/printing-howto.xml WARN: postinst You need to emerge ghostscript with the "cups" USE flag turned on. >>> Messages generated by process 27229 on 2009-02-13 12:54:43 CET for package x11-libs/qt-gui-4.4.2-r1: WARN: postinst After a rebuild or upgrade of Qt, it can happen that Qt plugins (such as Qt and KDE styles and widgets) can no longer be loaded. In this situation you should recompile the packages providing these plugins. Also, make sure you compile the Qt packages, and the packages that depend on it, with the same GCC version and the same USE flag settings (especially the debug flag). Packages that typically need to be recompiled are kdelibs from KDE4, any additional KDE4/Qt4 styles, qscintilla and PyQt4. Before filing a bug report, make sure all your Qt4 packages are up-to-date and built with the same configuration. For more information, see http://doc.trolltech.com/4.4/plugins-howto.html >>> Messages generated by process 27229 on 2009-02-13 12:57:53 CET for package x11-libs/qt-qt3support-4.4.2: WARN: postinst After a rebuild or upgrade of Qt, it can happen that Qt plugins (such as Qt and KDE styles and widgets) can no longer be loaded. In this situation you should recompile the packages providing these plugins. Also, make sure you compile the Qt packages, and the packages that depend on it, with the same GCC version and the same USE flag settings (especially the debug flag). Packages that typically need to be recompiled are kdelibs from KDE4, any additional KDE4/Qt4 styles, qscintilla and PyQt4. Before filing a bug report, make sure all your Qt4 packages are up-to-date and built with the same configuration. For more information, see http://doc.trolltech.com/4.4/plugins-howto.html >>> Messages generated by process 27229 on 2009-02-13 13:02:00 CET for package x11-libs/gtk+-2.12.11: LOG: postinst Please install app-text/evince for print preview functionality. Alternatively, check "gtk-print-preview-command" documentation and add it to your gtkrc. >>> Messages generated by process 27229 on 2009-02-13 13:14:09 CET for package app-crypt/pinentry-0.7.5: LOG: postinst We no longer install pinentry-curses and pinentry-qt SUID root by default. Linux kernels >=2.6.9 support memory locking for unprivileged processes. The soft resource limit for memory locking specifies the limit an unprivileged process may lock into memory. You can also use POSIX capabilities to allow pinentry to lock memory. To do so activate the caps USE flag and add the CAP_IPC_LOCK capability to the permitted set of your users. >>> Messages generated by process 27229 on 2009-02-13 13:21:39 CET for package app-crypt/gnupg-2.0.9: LOG: postinst If you wish to view images emerge: media-gfx/xloadimage, media-gfx/xli or any other viewer Remember to use photo-viewer option in configuration file to activate the right viewer >>> Messages generated by process 27229 on 2009-02-13 13:26:05 CET for package app-text/poppler-bindings-0.8.7: WARN: postinst You need to rebuild everything depending on poppler, use revdep-rebuild >>> Messages generated by process 27229 on 2009-02-13 13:36:35 CET for package dev-libs/libgweather-2.22.3: WARN: postinst Please run revdep-rebuild after upgrading this package. >>> Messages generated by process 27229 on 2009-02-13 13:44:47 CET for package gnome-extra/gnome-media-2.22.0: WARN: postinst If you cannot play some music format, please check your USE flags on media-plugins/gst-plugins-meta >>> Messages generated by process 27229 on 2009-02-13 14:00:12 CET for package net-libs/xulrunner-1.8.1.19: LOG: postinst Please remember to rebuild any packages that you have built against xulrunner. Some packages might be broken by the upgrade; if this is the case, please search at http://bugs.gentoo.org and open a new bug if one does not exist. >>> Messages generated by process 27229 on 2009-02-13 14:01:56 CET for package app-arch/file-roller-2.22.4: LOG: postinst file-roller is a frontend for several archiving utility. If you want a particular achive format support, see http://fileroller.sourceforge.net/ and install the relevant package. for example: 7-zip - app-arch/p7zip ace - app-arch/unace arj - app-arch/arj lzma - app-arch/lzma lzop - app-arch/lzop cpio - app-arch/cpio iso - app-arch/cdrtools jar,zip - app-arch/zip and app-arch/unzip lha - app-arch/lha rar - app-arch/unrar rpm - app-arch/rpm unstuff - app-arch/stuffit zoo - app-arch/zoo >>> Messages generated by process 27229 on 2009-02-13 14:06:26 CET for package gnome-extra/gnome-screensaver-2.22.2: LOG: postinst Information for converting screensavers is located in /usr/share/doc/gnome-screensaver-2.22.2/xss-conversion.txt. >>> Messages generated by process 27229 on 2009-02-13 14:10:14 CET for package media-video/totem-2.22.2-r1: WARN: postinst If totem doesn't play some video format, please check your USE flags on media-plugins/gst-plugins-meta >>> Messages generated by process 27229 on 2009-02-13 14:13:11 CET for package app-text/aspell-0.60.5: WARN: compile Appending a library link instruction (-lgpm); libraries to link to should not be passed through LDFLAGS LOG: postinst You will need to install a dictionary now. Please choose an aspell- dictionary from the app-dicts category After installing an aspell dictionary for your language(s), You may use the aspell-import utility to import your personal dictionaries from ispell, pspell and the older aspell WARN: postinst Please re-emerge ALL your aspell-LANG dictionaries >>> Messages generated by process 27229 on 2009-02-13 14:31:34 CET for package mail-client/evolution-2.22.3.1: LOG: postinst To change the default browser if you are not using GNOME, do: gconftool-2 --set /desktop/gnome/url-handlers/http/command -t string 'mozilla %s' gconftool-2 --set /desktop/gnome/url-handlers/https/command -t string 'mozilla %s' Replace 'mozilla %s' with which ever browser you use. Junk filters are now a run-time choice. You will get a choice of bogofilter or spamassassin based on which you have installed You have to install one of these for the spam filtering to actually work >>> Messages generated by process 27229 on 2009-02-13 14:36:32 CET for package media-gfx/imagemagick-6.4.4.6: LOG: compile disabling openmp support >>> Messages generated by process 27229 on 2009-02-13 14:40:03 CET for package gnome-base/nautilus-2.22.5.1-r1: LOG: postinst nautilus can use gstreamer to preview audio files. Just make sure to have the necessary plugins available to play the media type you want to preview >>> Messages generated by process 27229 on 2009-02-13 14:44:26 CET for package gnome-base/gnome-applets-2.22.3: WARN: postinst //usr/lib/python2.5/site-packages/invest doesn't exist! >>> Messages generated by process 27229 on 2009-02-13 14:45:37 CET for package gnome-extra/gnome-power-manager-2.22.1: LOG: postinst To enable frequency scaling interface, use the following command: gconftool-2 /apps/gnome-power-manager/ui/cpufreq_show -t bool -s true Note that this will conflict with other power managment utility like app-laptop/laptop-mode-tools. Suspend/hibernate-on-idle will only work if gnome-extra/gnome-screensaver is installed. >>> Messages generated by process 27229 on 2009-02-13 14:45:53 CET for package gnome-base/gnome-volume-manager-2.22.5: LOG: postinst To start the gnome-volume-manager daemon you need to configure it through it's preferences capplet. Also the HAL daemon (hald) needs to be running or it will shut down. If you experience problems with automounting (windows opened twice or nothing happening on media insertion) try changing the status of the automount USE flag. >>> Messages generated by process 27229 on 2009-02-13 14:51:08 CET for package gnome-base/gdm-2.20.7: LOG: postinst To make GDM start at boot, edit /etc/conf.d/xdm and then execute 'rc-update add xdm default'. GDM has changed the location of its configuration file. Please edit /etc/X11/gdm/custom.conf. The factory defaults are located at /usr/share/gdm/{defaults.conf,factory-defaults.conf} See README.install for more information about the change. >>> Messages generated by process 27229 on 2009-02-13 14:51:44 CET for package media-sound/sound-juicer-2.22.0-r1: WARN: postinst If sound-juicer does not rip to some music format, please check your USE flags on media-plugins/gst-plugins-meta >>> Messages generated by process 27229 on 2009-02-13 14:52:02 CET for package app-admin/sabayon-2.22.1: LOG: postinst To apply Sabayon defaults and mandatory settings to all users, put include "$(HOME)/.gconf.path.mandatory" in /etc/gconf/2/local-mandatory.path and put include "$(HOME)/.gconf.path.defaults" in /etc/gconf/2/local-defaults.path. You can safely create these files if they do not already exist. >>> Messages generated by process 27229 on 2009-02-13 14:59:25 CET for package gnome-extra/deskbar-applet-2.22.3.1: WARN: postinst The dictionary plugin in deskbar-applet uses the dictionary from gnome-extra/gnome-utils. If it is not present, the dictionary plugin will fail silently. >>> Messages generated by process 27229 on 2009-02-13 15:02:30 CET for package gnome-extra/gnome-games-2.22.3: WARN: setup USE='-guile' implies that Aisleriot won't be installed WARN: postinst Remember, in order to play games, you have to be in the 'games' group. Just run 'gpasswd -a games', then have re-login. >>> Messages generated by process 27229 on 2009-02-13 15:02:34 CET for package gnome-base/gnome-2.22.3: LOG: postinst Note that to change windowmanager to metacity do: export WINDOW_MANAGER="/usr/bin/metacity" of course this works for all other window managers as well The main file alteration monitoring functionality is now provided by >=glib-2.16. Note that on a modern Linux system you do not need the USE=fam flag on it if you have inotify support in your linux kernel ( >=2.6.13 ) enabled. USE=fam on glib is however useful for other situations, such as Gentoo/FreeBSD systems. A global USE=fam can also be useful for other packages that do not use the new file monitoring API yet that the new glib provides. Add yourself to the plugdev group if you want automounting to work. >>> Messages generated by process 3689 on 2009-02-13 15:19:24 CET for package app-portage/gentoolkit-0.2.4.2-r1: LOG: postinst The default location for revdep-rebuild files has been moved to /var/cache/revdep-rebuild when run as root. Another alternative to equery is app-portage/portage-utils For further information on gentoolkit, please read the gentoolkit guide: http://www.gentoo.org/doc/en/gentoolkit.xml >>> Messages generated by process 3943 on 2009-02-13 23:40:23 CET for package x11-misc/shared-mime-info-0.51: LOG: postinst The database format has changed between 0.30 and 0.40. You may need to update all your local databases and caches. To do so, please run the following commands: (for each user) $ update-mime-database ~/.local/share/mime/ (as root) # update-mime-database /usr/local/share/mime/ >>> Messages generated by process 4011 on 2009-02-14 02:40:51 CET for package sys-power/acpid-1.0.6-r1: LOG: postinst As of version 1.0.6, acpid uses system log facility instead of custom log file. This means acpid messages will be usually located in /var/log/messages (and not in /var/log/acpid) for common setups. >>> Messages generated by process 4011 on 2009-02-14 02:41:41 CET for package x11-drivers/nvidia-drivers-177.82: LOG: postinst You must be in the video group to use the NVIDIA device For more info, read the docs at http://www.gentoo.org/doc/en/nvidia-guide.xml#doc_chap3_sect6 This ebuild installs a kernel module and X driver. Both must match explicitly in their version. This means, if you restart X, you most modprobe -r nvidia before starting it back up To use the NVIDIA GLX, run "eselect opengl set nvidia" nVidia has requested that any bug reports submitted have the output of /usr/bin/nvidia-bug-report.sh included. To work with compiz, you must enable the AddARGBGLXVisuals option. If you are having resolution problems, try disabling DynamicTwinView. >>> Messages generated by process 13650 on 2009-02-15 15:45:15 CET for package media-libs/t1lib-5.0.2-r1: WARN: postinst You may have to rebuild other packages depending on t1lib. You may use revdep-rebuild (from app-portage/gentoolkit) to do all necessary tricks. >>> Messages generated by process 13650 on 2009-02-15 15:48:38 CET for package dev-lang/php-5.2.8-r2: WARN: setup USE flag 'truetype' needs one of these additional flag(s) set: gd gd-external 'gd' was automatically selected and enabled. You can change that by enabling/disabling those flags accordingly in /etc/portage/package.use. WARN: postinst If you have additional third party PHP extensions (such as dev-php5/phpdbg) you may need to recompile them now. USE="pic" slows down PHP but has to be enabled on setups where TEXTRELs are disabled (e.g. when using PaX in the kernel). On hardened profiles this USE flag is enabled automatically >>> Messages generated by process 4132 on 2009-02-15 22:05:32 CET for package net-misc/openssh-5.1_p1-r2: WARN: postinst Remember to merge your config files in /etc/ssh/ and then restart sshd: '/etc/init.d/sshd restart'. Please be aware users need a valid shell in /etc/passwd in order to be allowed to login. >>> Messages generated by process 3421 on 2009-02-15 22:09:50 CET for package sys-auth/consolekit-0.2.10: WARN: postinst You need to restart ConsoleKit to get the new features. This can be done with /etc/init.d/consolekit restart but make sure you do this and then restart your session otherwise you will get access denied for certain actions >>> Messages generated by process 4331 on 2009-02-15 23:17:41 CET for package sys-apps/util-linux-2.14.1: WARN: postinst The loop-aes code has been split out of USE=crypt and into USE=loop-aes. If you need support for it, make sure to update your USE accordingly. >>> Messages generated by process 17530 on 2009-02-15 23:19:15 CET for package sys-apps/util-linux-2.14.1: WARN: postinst The loop-aes code has been split out of USE=crypt and into USE=loop-aes. If you need support for it, make sure to update your USE accordingly. >>> Messages generated by process 30068 on 2009-02-15 23:21:30 CET for package app-text/poppler-bindings-0.8.7: WARN: postinst You need to rebuild everything depending on poppler, use revdep-rebuild >>> Messages generated by process 4971 on 2009-02-16 01:12:57 CET for package dev-libs/expat-2.0.1-r1: WARN: postinst Please note that the soname of the library changed! If you are upgrading from a previous version you need to fix dynamic linking inconsistencies by executing: revdep-rebuild -X --library libexpat.so.0 >>> Messages generated by process 4971 on 2009-02-16 01:13:40 CET for package sys-apps/sandbox-1.2.18.1-r2: WARN: compile If configure fails with a 'cannot run C compiled programs' error, try this: FEATURES=-sandbox emerge sandbox >>> Messages generated by process 4971 on 2009-02-16 01:15:31 CET for package sys-kernel/linux-headers-2.6.27-r2: LOG: postinst Kernel headers are usually only used when recompiling your system libc, as such, following the installation of newer headers, it is advised that you re-merge your system libc. Failure to do so will cause your system libc to not make use of newer features present in the updated kernel headers. >>> Messages generated by process 4971 on 2009-02-16 01:17:38 CET for package sys-apps/baselayout-1.12.11.1: LOG: postinst The default setting for wiping /tmp has been set to 'yes'. Consult /etc/conf.d/bootmisc for more information. >>> Messages generated by process 4971 on 2009-02-16 01:17:55 CET for package sys-fs/udev-124-r1: LOG: postinst persistent-net does assigning fixed names to network devices. If you have problems with the persistent-net rules, just delete the rules file rm /etc/udev/rules.d/70-persistent-net.rules and then reboot. This may however number your devices in a different way than they are now. WARN: postinst If you build an initramfs including udev, then please make sure that the /sbin/udevadm binary gets included, as the helper apps udevinfo, udevtrigger, ... are now only symlinks to udevadm. mount options for directory /dev are no longer set in /etc/udev/udev.conf, but in /etc/fstab as for other directories. LOG: postinst For more information on udev on Gentoo, writing udev rules, and fixing known issues visit: http://www.gentoo.org/doc/en/udev-guide.xml >>> Messages generated by process 4971 on 2009-02-16 01:45:22 CET for package dev-libs/openssl-0.9.8j: WARN: postinst Due to the way openssl is architected, you cannot switch between optimized versions without breaking ABI. The default i686 0.9.8 ABI was an unoptimized version with horrible performance. This version uses the optimized ABI. If you experience segfaults when using ssl apps (like openssh), just re-emerge the offending package. >>> Messages generated by process 4971 on 2009-02-16 01:45:38 CET for package net-misc/wget-1.11.3: WARN: preinst The /etc/wget/wgetrc file has been relocated to /etc/wgetrc >>> Messages generated by process 4971 on 2009-02-16 01:50:04 CET for package sys-apps/coreutils-6.10-r2: WARN: postinst Make sure you run 'hash -r' in your active shells. >>> Messages generated by process 4971 on 2009-02-16 01:52:33 CET for package net-nds/openldap-2.3.43: LOG: postinst Getting started using OpenLDAP? There is some documentation available: Gentoo Guide to OpenLDAP Authentication (http://www.gentoo.org/doc/en/ldap-howto.xml) An example file for tuning BDB backends with openldap is: /usr/share/doc/openldap-2.3.43/DB_CONFIG.fast.example.gz >>> Messages generated by process 4971 on 2009-02-16 01:56:28 CET for package dev-lang/python-2.5.2-r7: WARN: postinst If you have just upgraded from an older version of python you will need to run: /usr/sbin/python-updater This will automatically rebuild all the python dependent modules to run with python-2.5. Your original Python is still installed and can be accessed via /usr/bin/python2.x. >>> Messages generated by process 4971 on 2009-02-16 02:02:13 CET for package sys-apps/util-linux-2.14.1: WARN: postinst The loop-aes code has been split out of USE=crypt and into USE=loop-aes. If you need support for it, make sure to update your USE accordingly. >>> Messages generated by process 4971 on 2009-02-16 02:04:23 CET for package sys-apps/busybox-1.12.2-r1: WARN: unpack Could not locate user configfile, so we will save a default one LOG: install Your configuration for sys-apps/busybox-1.12.2-r1 has been saved in /etc/portage/savedconfig/sys-apps/busybox-1.12.2-r1 for your editing pleasure. You can edit these files by hand and remerge this package with USE=savedconfig to customise the configuration. You can rename this file/directory to one of the following for its configuration to apply to multiple versions: ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/ [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}] >>> Messages generated by process 4971 on 2009-02-16 02:05:10 CET for package net-misc/openssh-5.1_p1-r2: WARN: postinst Remember to merge your config files in /etc/ssh/ and then restart sshd: '/etc/init.d/sshd restart'. Please be aware users need a valid shell in /etc/passwd in order to be allowed to login. >>> Messages generated by process 4971 on 2009-02-16 02:16:54 CET for package sys-devel/gcc-4.1.2: WARN: postinst If you have issues with packages unable to locate libstdc++.la, then try running 'fix_libtool_files.sh' on the old gcc versions. >>> Messages generated by process 4433 on 2009-02-16 02:29:44 CET for package dev-libs/expat-2.0.1-r1: WARN: postinst Please note that the soname of the library changed! If you are upgrading from a previous version you need to fix dynamic linking inconsistencies by executing: revdep-rebuild -X --library libexpat.so.0 >>> Messages generated by process 4433 on 2009-02-16 02:30:24 CET for package sys-apps/sandbox-1.2.18.1-r2: WARN: compile If configure fails with a 'cannot run C compiled programs' error, try this: FEATURES=-sandbox emerge sandbox >>> Messages generated by process 4433 on 2009-02-16 02:32:07 CET for package sys-kernel/linux-headers-2.6.27-r2: LOG: postinst Kernel headers are usually only used when recompiling your system libc, as such, following the installation of newer headers, it is advised that you re-merge your system libc. Failure to do so will cause your system libc to not make use of newer features present in the updated kernel headers. >>> Messages generated by process 4433 on 2009-02-16 02:33:58 CET for package sys-apps/baselayout-1.12.11.1: LOG: postinst The default setting for wiping /tmp has been set to 'yes'. Consult /etc/conf.d/bootmisc for more information. >>> Messages generated by process 4433 on 2009-02-16 02:34:14 CET for package sys-fs/udev-124-r1: LOG: postinst persistent-net does assigning fixed names to network devices. If you have problems with the persistent-net rules, just delete the rules file rm /etc/udev/rules.d/70-persistent-net.rules and then reboot. This may however number your devices in a different way than they are now. WARN: postinst If you build an initramfs including udev, then please make sure that the /sbin/udevadm binary gets included, as the helper apps udevinfo, udevtrigger, ... are now only symlinks to udevadm. mount options for directory /dev are no longer set in /etc/udev/udev.conf, but in /etc/fstab as for other directories. LOG: postinst For more information on udev on Gentoo, writing udev rules, and fixing known issues visit: http://www.gentoo.org/doc/en/udev-guide.xml >>> Messages generated by process 4433 on 2009-02-16 03:00:43 CET for package dev-libs/openssl-0.9.8j: WARN: postinst Due to the way openssl is architected, you cannot switch between optimized versions without breaking ABI. The default i686 0.9.8 ABI was an unoptimized version with horrible performance. This version uses the optimized ABI. If you experience segfaults when using ssl apps (like openssh), just re-emerge the offending package. >>> Messages generated by process 4433 on 2009-02-16 03:01:00 CET for package net-misc/wget-1.11.3: WARN: preinst The /etc/wget/wgetrc file has been relocated to /etc/wgetrc >>> Messages generated by process 4433 on 2009-02-16 03:05:26 CET for package sys-apps/coreutils-6.10-r2: WARN: postinst Make sure you run 'hash -r' in your active shells. >>> Messages generated by process 4433 on 2009-02-16 03:07:55 CET for package net-nds/openldap-2.3.43: LOG: postinst Getting started using OpenLDAP? There is some documentation available: Gentoo Guide to OpenLDAP Authentication (http://www.gentoo.org/doc/en/ldap-howto.xml) An example file for tuning BDB backends with openldap is: /usr/share/doc/openldap-2.3.43/DB_CONFIG.fast.example.gz >>> Messages generated by process 4433 on 2009-02-16 03:11:53 CET for package dev-lang/python-2.5.2-r7: WARN: postinst If you have just upgraded from an older version of python you will need to run: /usr/sbin/python-updater This will automatically rebuild all the python dependent modules to run with python-2.5. Your original Python is still installed and can be accessed via /usr/bin/python2.x. >>> Messages generated by process 4433 on 2009-02-16 03:17:49 CET for package sys-apps/util-linux-2.14.1: WARN: postinst The loop-aes code has been split out of USE=crypt and into USE=loop-aes. If you need support for it, make sure to update your USE accordingly. >>> Messages generated by process 4433 on 2009-02-16 03:20:10 CET for package sys-apps/busybox-1.12.2-r1: WARN: unpack Could not locate user configfile, so we will save a default one LOG: install Your configuration for sys-apps/busybox-1.12.2-r1 has been saved in /etc/portage/savedconfig/sys-apps/busybox-1.12.2-r1 for your editing pleasure. You can edit these files by hand and remerge this package with USE=savedconfig to customise the configuration. You can rename this file/directory to one of the following for its configuration to apply to multiple versions: ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/ [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}] >>> Messages generated by process 4433 on 2009-02-16 03:21:07 CET for package net-misc/openssh-5.1_p1-r2: WARN: postinst Remember to merge your config files in /etc/ssh/ and then restart sshd: '/etc/init.d/sshd restart'. Please be aware users need a valid shell in /etc/passwd in order to be allowed to login. >>> Messages generated by process 4433 on 2009-02-16 03:32:52 CET for package sys-devel/gcc-4.1.2: WARN: postinst If you have issues with packages unable to locate libstdc++.la, then try running 'fix_libtool_files.sh' on the old gcc versions. >>> Messages generated by process 15193 on 2009-02-16 03:44:18 CET for package dev-libs/expat-2.0.1-r1: WARN: postinst Please note that the soname of the library changed! If you are upgrading from a previous version you need to fix dynamic linking inconsistencies by executing: revdep-rebuild -X --library libexpat.so.0 >>> Messages generated by process 15193 on 2009-02-16 03:49:27 CET for package dev-db/sqlite-3.6.6.2: LOG: postinst sqlite-3.6.X is not totally backwards compatible, see http://www.sqlite.org/releaselog/3_6_0.html for full details. >>> Messages generated by process 15193 on 2009-02-16 03:49:48 CET for package dev-libs/libsigc++-2.2.3: WARN: postinst To allow parallel installation of sigc++-1.0, sigc++-1.2, and sigc++2.0 the header files are now installed in a version specific subdirectory. Be sure to unmerge any libsigc++ versions < 1.0.4 that you may have previously installed. >>> Messages generated by process 15193 on 2009-02-16 03:50:56 CET for package app-text/libpaper-1.1.23: LOG: postinst run "paperconfig -p letter" as root to use letter-pagesizes or paperconf with normal user privileges. >>> Messages generated by process 15193 on 2009-02-16 03:51:47 CET for package sys-fs/device-mapper-1.02.24-r1: LOG: postinst device-mapper volumes are no longer automatically created for baselayout-2 users. If you are using baselayout-2, be sure to run: # rc-update add device-mapper boot >>> Messages generated by process 15193 on 2009-02-16 03:53:50 CET for package sys-apps/sandbox-1.2.18.1-r2: WARN: compile If configure fails with a 'cannot run C compiled programs' error, try this: FEATURES=-sandbox emerge sandbox >>> Messages generated by process 15193 on 2009-02-16 03:54:38 CET for package sys-process/cronbase-0.3.2-r1: LOG: postinst Portage doesn't enforce proper permissions on already existing directories (bug 141619). Appropriate permissions are now being set on //etc/cron.{hourly,daily,weekly,monthly}, //var/spool/cron/ and //var/spool/cron/lastrun/ (see bug 182998) >>> Messages generated by process 15193 on 2009-02-16 03:54:56 CET for package net-misc/dhcpcd-4.0.7: LOG: unpack dhcpcd-3 command line support enabled LOG: postinst You have installed dhcpcd with zeroconf support. This means that it will always obtain an IP address even if no DHCP server can be contacted, which will break any existing failover support you may have configured in your net configuration. This behaviour can be controlled with the -L flag. See the dhcpcd man page for more details. >>> Messages generated by process 15193 on 2009-02-16 03:56:02 CET for package sys-kernel/linux-headers-2.6.27-r2: LOG: postinst Kernel headers are usually only used when recompiling your system libc, as such, following the installation of newer headers, it is advised that you re-merge your system libc. Failure to do so will cause your system libc to not make use of newer features present in the updated kernel headers. >>> Messages generated by process 15193 on 2009-02-16 03:56:57 CET for package sys-apps/pciutils-3.0.2: LOG: install Providing a backwards compatibility non-compressed pci.ids >>> Messages generated by process 15193 on 2009-02-16 04:01:49 CET for package app-admin/metalog-0.8-r1: WARN: postinst The default metalog.conf file has been moved from /etc/metalog/metalog.conf to just /etc/metalog.conf. If you had a standard setup, the file has been moved for you. >>> Messages generated by process 15193 on 2009-02-16 04:02:38 CET for package sys-fs/udev-124-r1: LOG: postinst persistent-net does assigning fixed names to network devices. If you have problems with the persistent-net rules, just delete the rules file rm /etc/udev/rules.d/70-persistent-net.rules and then reboot. This may however number your devices in a different way than they are now. WARN: postinst If you build an initramfs including udev, then please make sure that the /sbin/udevadm binary gets included, as the helper apps udevinfo, udevtrigger, ... are now only symlinks to udevadm. mount options for directory /dev are no longer set in /etc/udev/udev.conf, but in /etc/fstab as for other directories. LOG: postinst For more information on udev on Gentoo, writing udev rules, and fixing known issues visit: http://www.gentoo.org/doc/en/udev-guide.xml >>> Messages generated by process 15193 on 2009-02-16 04:02:46 CET for package sys-apps/baselayout-1.12.11.1: LOG: postinst The default setting for wiping /tmp has been set to 'yes'. Consult /etc/conf.d/bootmisc for more information. >>> Messages generated by process 15193 on 2009-02-16 04:03:22 CET for package x11-misc/xdg-utils-1.0.2-r1: LOG: postinst Install >=x11-libs/gtk+-2 if you need command gtk-update-icon-cache. >>> Messages generated by process 15193 on 2009-02-16 04:05:54 CET for package media-libs/tiff-3.8.2-r4: LOG: postinst JBIG support is intended for Hylafax fax compression, so we really need more feedback in other areas (most testing has been done with fax). Be sure to recompile anything linked against tiff if you rebuild it with jbig support. >>> Messages generated by process 15193 on 2009-02-16 04:08:45 CET for package dev-util/ccache-2.4-r7: LOG: postinst To use ccache with **non-Portage** C compiling, add /usr/lib/ccache/bin to the beginning of your path, before /usr/bin. Portage 2.0.46-r11+ will automatically take advantage of ccache with no additional steps. If this is your first install of ccache, type something like this to set a maximum cache size of 2GB: # ccache -M 2G >>> Messages generated by process 15193 on 2009-02-16 04:10:41 CET for package sys-power/acpid-1.0.6-r1: LOG: postinst As of version 1.0.6, acpid uses system log facility instead of custom log file. This means acpid messages will be usually located in /var/log/messages (and not in /var/log/acpid) for common setups. >>> Messages generated by process 15193 on 2009-02-16 04:24:02 CET for package media-libs/freetype-2.3.7-r1: WARN: postinst After upgrading to freetype-2.3.5, it is necessary to rebuild libXfont to avoid build errors in some packages. LOG: postinst The utilities and demos previously bundled with freetype are now optional. Enable the utils USE flag if you would like them to be installed. >>> Messages generated by process 15193 on 2009-02-16 04:26:40 CET for package sys-apps/dbus-1.2.3-r1: LOG: postinst To start the D-Bus system-wide messagebus by default you should add it to the default runlevel : `rc-update add dbus default` Some applications require a session bus in addition to the system bus. Please see `man dbus-launch` for more information. WARN: postinst You MUST run 'revdep-rebuild' after emerging this package LOG: postinst WARN: postinst If you are currently running X with the hal useflag enabled restarting the dbus service WILL restart X as well LOG: postinst WARN: postinst You must restart D-Bus `/etc/init.d/dbus restart` to run the new version of the daemon. For many people, this means exiting X as well. >>> Messages generated by process 15193 on 2009-02-16 04:27:00 CET for package x11-libs/libXi-1.1.3: WARN: postinst Some special keys and keyboard layouts may stop working. To fix them, recompile xorg-server. >>> Messages generated by process 15193 on 2009-02-16 04:30:11 CET for package x11-libs/libXdamage-1.1.1: WARN: postinst Compositing managers may stop working. To fix them, recompile xorg-server. >>> Messages generated by process 15193 on 2009-02-16 04:45:15 CET for package sys-kernel/gentoo-sources-2.6.27-r8: LOG: postinst If you are upgrading from a previous kernel, you may be interested in the following document: - General upgrade guide: http://www.gentoo.org/doc/en/kernel-upgrade.xml >>> Messages generated by process 15193 on 2009-02-16 04:53:34 CET for package dev-libs/libcdio-0.80: WARN: postinst If you've upgraded from a previous version of libcdio, you may need to re-emerge packages that linked against libcdio (vlc, vcdimager and more) by running: revdep-rebuild >>> Messages generated by process 15193 on 2009-02-16 04:59:04 CET for package sys-fs/cryptsetup-1.0.5-r1: WARN: setup CONFIG_DM_CRYPT: is not set (required for cryptsetup) Please check to make sure these options are set correctly. Failure to do so may cause unexpected problems. WARN: postinst This ebuild introduces a new set of scripts and configuration than the last version. If you are currently using /etc/conf.d/cryptfs then you *MUST* copy your old file to: /etc/conf.d/dmcrypt Or your encrypted partitions will *NOT* work. LOG: postinst Please see the example for configuring a LUKS mountpoint in /etc/conf.d/dmcrypt If you are using baselayout-2 then please do: rc-update add dmcrypt boot This version introduces a command line arguement 'key_timeout'. If you want the search for the removable key device to timeout after 10 seconds add the following to your bootloader config: key_timeout=10 A timeout of 0 will mean it will wait indefinitely. >>> Messages generated by process 15193 on 2009-02-16 05:02:11 CET for package dev-libs/openssl-0.9.8j: WARN: postinst Due to the way openssl is architected, you cannot switch between optimized versions without breaking ABI. The default i686 0.9.8 ABI was an unoptimized version with horrible performance. This version uses the optimized ABI. If you experience segfaults when using ssl apps (like openssh), just re-emerge the offending package. >>> Messages generated by process 15193 on 2009-02-16 05:02:54 CET for package net-misc/wget-1.11.3: WARN: preinst The /etc/wget/wgetrc file has been relocated to /etc/wgetrc >>> Messages generated by process 15193 on 2009-02-16 05:14:11 CET for package x11-libs/gtk+-2.12.11: LOG: postinst Please install app-text/evince for print preview functionality. Alternatively, check "gtk-print-preview-command" documentation and add it to your gtkrc. >>> Messages generated by process 15193 on 2009-02-16 05:19:47 CET for package x11-misc/shared-mime-info-0.51: LOG: postinst The database format has changed between 0.30 and 0.40. You may need to update all your local databases and caches. To do so, please run the following commands: (for each user) $ update-mime-database ~/.local/share/mime/ (as root) # update-mime-database /usr/local/share/mime/ >>> Messages generated by process 15193 on 2009-02-16 05:27:52 CET for package media-libs/gst-plugins-good-0.10.8-r1: LOG: postinst The Gstreamer plugins setup has changed quite a bit on Gentoo, applications now should provide the basic plugins needed. The new seperate plugins are all named 'gst-plugins-'. To get a listing of currently available plugins execute 'emerge -s gst-plugins-'. In most cases it shouldn't be needed though to emerge extra plugins. >>> Messages generated by process 15193 on 2009-02-16 05:29:43 CET for package media-libs/gst-plugins-ugly-0.10.8: LOG: postinst The Gstreamer plugins setup has changed quite a bit on Gentoo, applications now should provide the basic plugins needed. The new seperate plugins are all named 'gst-plugins-'. To get a listing of currently available plugins execute 'emerge -s gst-plugins-'. In most cases it shouldn't be needed though to emerge extra plugins. >>> Messages generated by process 15193 on 2009-02-16 05:37:57 CET for package dev-lang/python-2.5.2-r7: WARN: postinst If you have just upgraded from an older version of python you will need to run: /usr/sbin/python-updater This will automatically rebuild all the python dependent modules to run with python-2.5. Your original Python is still installed and can be accessed via /usr/bin/python2.x. >>> Messages generated by process 15193 on 2009-02-16 05:39:28 CET for package media-libs/alsa-lib-1.0.17a: WARN: postinst Starting from alsa 1.0.11_rc3 the configuration for dmix is changed. Leaving around old asound.conf or ~/.asoundrc might make all apps using ALSA output crash. Note that dmix output is enabled by default on the 'default' device since ALSA 1.0.9. LOG: postinst Please try in-kernel ALSA drivers instead of the alsa-drivers ebuild. If alsa-drivers works for you where a recent kernel does not, we want to know about this. Our e-mail address is alsa-bugs@gentoo.org However, if you notice no sound output or instability, please try to upgrade your kernel to a newer version first. >>> Messages generated by process 15193 on 2009-02-16 05:42:48 CET for package app-portage/gentoolkit-0.2.4.2-r1: LOG: postinst The default location for revdep-rebuild files has been moved to /var/cache/revdep-rebuild when run as root. Another alternative to equery is app-portage/portage-utils For further information on gentoolkit, please read the gentoolkit guide: http://www.gentoo.org/doc/en/gentoolkit.xml >>> Messages generated by process 15193 on 2009-02-16 05:44:23 CET for package x11-libs/libxklavier-3.6: WARN: postinst Please note that the soname of the library changed! If you are upgrading from a version prior to 3.4 you need to fix dynamic linking inconsistencies by executing: revdep-rebuild -X --library libxklavier.so.11 >>> Messages generated by process 15193 on 2009-02-16 05:47:09 CET for package sys-auth/consolekit-0.2.10: WARN: postinst You need to restart ConsoleKit to get the new features. This can be done with /etc/init.d/consolekit restart but make sure you do this and then restart your session otherwise you will get access denied for certain actions >>> Messages generated by process 15193 on 2009-02-16 05:49:26 CET for package sys-apps/busybox-1.12.2-r1: WARN: unpack Could not locate user configfile, so we will save a default one LOG: install Your configuration for sys-apps/busybox-1.12.2-r1 has been saved in /etc/portage/savedconfig/sys-apps/busybox-1.12.2-r1 for your editing pleasure. You can edit these files by hand and remerge this package with USE=savedconfig to customise the configuration. You can rename this file/directory to one of the following for its configuration to apply to multiple versions: ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/ [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}] >>> Messages generated by process 15193 on 2009-02-16 05:55:52 CET for package x11-base/xorg-server-1.3.0.0-r6: WARN: setup Forcing on xorg-x11 for new enough glxtokens.h... WARN: postinst Users of reduced blanking now need: Option "ReducedBlanking" In the relevant Monitor section(s). Make sure your reduced blanking modelines are safe! >>> Messages generated by process 15193 on 2009-02-16 05:57:43 CET for package x11-drivers/xf86-video-openchrome-0.2.903: LOG: postinst Supported chipsets: CLE266 (VT3122) KM400/P4M800 (VT3205) K8M800 (VT3204) PM800/PM880/CN400 (VT3259) VM800/CN700/P4M800Pro (VT3314) CX700 (VT3324) P4M890 (VT3327) K8M890 (VT3336) P4M900/VN896 (VT3364) The driver name is 'openchrome', and this is what you need to use in your xorg.conf now (instead of 'via'). See the ChangeLog and release notes for more information. >>> Messages generated by process 15193 on 2009-02-16 05:58:00 CET for package x11-drivers/xf86-video-savage-2.1.2-r1: LOG: postinst Direct rendering with kernels <=2.6.18 requires that you use x11-drm 20060608 or newer rather than the DRM in the kernel. >>> Messages generated by process 15193 on 2009-02-16 06:03:48 CET for package x11-drivers/nvidia-drivers-177.82: LOG: postinst You must be in the video group to use the NVIDIA device For more info, read the docs at http://www.gentoo.org/doc/en/nvidia-guide.xml#doc_chap3_sect6 This ebuild installs a kernel module and X driver. Both must match explicitly in their version. This means, if you restart X, you most modprobe -r nvidia before starting it back up To use the NVIDIA GLX, run "eselect opengl set nvidia" nVidia has requested that any bug reports submitted have the output of /usr/bin/nvidia-bug-report.sh included. To work with compiz, you must enable the AddARGBGLXVisuals option. If you are having resolution problems, try disabling DynamicTwinView. >>> Messages generated by process 15193 on 2009-02-16 06:16:05 CET for package net-nds/openldap-2.3.43: LOG: postinst Getting started using OpenLDAP? There is some documentation available: Gentoo Guide to OpenLDAP Authentication (http://www.gentoo.org/doc/en/ldap-howto.xml) An example file for tuning BDB backends with openldap is: /usr/share/doc/openldap-2.3.43/DB_CONFIG.fast.example.gz >>> Messages generated by process 15193 on 2009-02-16 06:19:21 CET for package sys-apps/coreutils-6.10-r2: WARN: postinst Make sure you run 'hash -r' in your active shells. >>> Messages generated by process 15193 on 2009-02-16 06:21:07 CET for package app-crypt/pinentry-0.7.5: LOG: postinst We no longer install pinentry-curses and pinentry-qt SUID root by default. Linux kernels >=2.6.9 support memory locking for unprivileged processes. The soft resource limit for memory locking specifies the limit an unprivileged process may lock into memory. You can also use POSIX capabilities to allow pinentry to lock memory. To do so activate the caps USE flag and add the CAP_IPC_LOCK capability to the permitted set of your users. >>> Messages generated by process 15193 on 2009-02-16 06:21:57 CET for package sys-boot/grub-0.97-r6: LOG: preinst To avoid automounting and autoinstalling with /boot, just export the DONT_MOUNT_BOOT variable. WARN: postinst *** IMPORTANT NOTE: you must run grub and install the new version's stage1 to your MBR. Until you do, stage1 and stage2 will still be the old version, but later stages will be the new version, which could cause problems such as an unbootable system. This means you must use either grub-install or perform root/setup manually! For more help, see the handbook: http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=1&chap=10#grub-install-auto LOG: postinst To interactively install grub files to another device such as a USB stick, just run the following and specify the directory as prompted: emerge --config =grub-0.97-r6 Alternately, you can export GRUB_ALT_INSTALLDIR=/path/to/use to tell grub where to install in a non-interactive way. >>> Messages generated by process 15193 on 2009-02-16 06:23:35 CET for package net-misc/openssh-5.1_p1-r2: WARN: postinst Remember to merge your config files in /etc/ssh/ and then restart sshd: '/etc/init.d/sshd restart'. Please be aware users need a valid shell in /etc/passwd in order to be allowed to login. >>> Messages generated by process 15193 on 2009-02-16 06:27:25 CET for package dev-libs/cyrus-sasl-2.1.22-r2: WARN: setup You have both the 'gdbm' and 'berkdb' USE flags enabled. Will default to GNU DB as your SASLdb database backend. If you want to build with BerkeleyDB support, hit Control-C now, change your USE flags -gdbm and emerge again. Waiting 10 seconds before starting ... (Control-C to abort) ... >>> Messages generated by process 15193 on 2009-02-16 06:30:18 CET for package media-libs/fontconfig-2.6.0-r2: WARN: postinst Please make fontconfig configuration changes in /etc/fonts/conf.d/ and NOT to /etc/fonts/fonts.conf, as it will be replaced! >>> Messages generated by process 15193 on 2009-02-16 06:33:12 CET for package app-admin/sudo-1.7.0: WARN: postinst sudo uses the /etc/ldap.conf.sudo file for ldap configuration. >>> Messages generated by process 15193 on 2009-02-16 06:38:37 CET for package app-text/docbook-xml-dtd-4.1.2-r6: WARN: postrm /etc/sgml/sgml-docbook.cat still exists! Not removing from /etc/sgml/xml-docbook-4.1.2.cat This is normal behavior for an upgrade ... /usr/share/sgml/docbook/xml-dtd-4.1.2/docbook.cat still exists! Not removing from /etc/sgml/xml-docbook-4.1.2.cat This is normal behavior for an upgrade ... >>> Messages generated by process 15193 on 2009-02-16 06:42:36 CET for package app-text/docbook-xml-dtd-4.4-r1: WARN: postrm /etc/sgml/sgml-docbook.cat still exists! Not removing from /etc/sgml/xml-docbook-4.4.cat This is normal behavior for an upgrade ... /usr/share/sgml/docbook/xml-dtd-4.4/docbook.cat still exists! Not removing from /etc/sgml/xml-docbook-4.4.cat This is normal behavior for an upgrade ... >>> Messages generated by process 15193 on 2009-02-16 06:43:51 CET for package media-libs/t1lib-5.0.2-r1: WARN: postinst You may have to rebuild other packages depending on t1lib. You may use revdep-rebuild (from app-portage/gentoolkit) to do all necessary tricks. >>> Messages generated by process 15193 on 2009-02-16 06:45:16 CET for package sys-apps/util-linux-2.14.1: WARN: postinst The loop-aes code has been split out of USE=crypt and into USE=loop-aes. If you need support for it, make sure to update your USE accordingly. >>> Messages generated by process 15193 on 2009-02-16 06:51:29 CET for package app-text/poppler-bindings-0.8.7: WARN: postinst You need to rebuild everything depending on poppler, use revdep-rebuild >>> Messages generated by process 15193 on 2009-02-16 06:52:26 CET for package app-misc/mc-4.6.1-r4: LOG: postinst Add the following line to your ~/.bashrc to allow mc to chdir to its latest working dir at exit # Midnight Commander chdir enhancement if [ -f /usr/share/mc/mc.gentoo ]; then . /usr/share/mc/mc.gentoo fi >>> Messages generated by process 15193 on 2009-02-16 07:01:23 CET for package app-cdr/dvd+rw-tools-7.1: LOG: postinst When you run growisofs if you receive: unable to anonymously mmap 33554432: Resource temporarily unavailable error message please run 'ulimit -l unlimited' >>> Messages generated by process 15193 on 2009-02-16 07:07:51 CET for package gnome-extra/gnome-screensaver-2.22.2: LOG: postinst Information for converting screensavers is located in /usr/share/doc/gnome-screensaver-2.22.2/xss-conversion.txt. >>> Messages generated by process 15193 on 2009-02-16 07:09:04 CET for package sys-apps/hal-0.5.11-r1: LOG: install Migrating xorg.conf Core Keyboard configuration to HAL FDI file WARN: install Failed to migrate your keyboard configuration. LOG: postinst The HAL daemon needs to be running for certain applications to work. Suggested is to add the init script to your start-up scripts, this should be done like this : `rc-update add hald default` Looking for automounting support? Add yourself to the plugdev group IF you have additional applications which consume ACPI events, you should consider installing acpid to allow applications to share ACPI events. If you wish to use a non US layout, you may do so by executing: setxkbmap or by utilizing your Desktop Environment's Keyboard Layout Settings mechanism. Under GNOME, this is gnome-keyboard-properties, and under KDE it is kxkb. In order have suspend/hibernate function with HAL or apps that use HAL (such as gnome-power-manager), you should build HAL with the laptop useflag which will install pm-utils. X Input Hotplugging (if you build xorg-server with the HAL useflag) reads user specific configuration from /etc/hal/fdi/policy/. You should remove the Input sections from your xorg.conf once you have migrated the rules to a HAL fdi file. >>> Messages generated by process 15193 on 2009-02-16 07:22:43 CET for package dev-libs/libgweather-2.22.3: WARN: postinst Please run revdep-rebuild after upgrading this package. >>> Messages generated by process 15193 on 2009-02-16 07:23:48 CET for package gnome-extra/gnome-media-2.22.0: WARN: postinst If you cannot play some music format, please check your USE flags on media-plugins/gst-plugins-meta >>> Messages generated by process 15193 on 2009-02-16 07:38:24 CET for package net-libs/xulrunner-1.8.1.19: LOG: postinst Please remember to rebuild any packages that you have built against xulrunner. Some packages might be broken by the upgrade; if this is the case, please search at http://bugs.gentoo.org and open a new bug if one does not exist. >>> Messages generated by process 15193 on 2009-02-16 07:39:10 CET for package app-arch/file-roller-2.22.4: LOG: postinst file-roller is a frontend for several archiving utility. If you want a particular achive format support, see http://fileroller.sourceforge.net/ and install the relevant package. for example: 7-zip - app-arch/p7zip ace - app-arch/unace arj - app-arch/arj lzma - app-arch/lzma lzop - app-arch/lzop cpio - app-arch/cpio iso - app-arch/cdrtools jar,zip - app-arch/zip and app-arch/unzip lha - app-arch/lha rar - app-arch/unrar rpm - app-arch/rpm unstuff - app-arch/stuffit zoo - app-arch/zoo >>> Messages generated by process 15193 on 2009-02-16 07:45:37 CET for package media-video/totem-2.22.2-r1: WARN: postinst If totem doesn't play some video format, please check your USE flags on media-plugins/gst-plugins-meta >>> Messages generated by process 15193 on 2009-02-16 07:50:38 CET for package net-print/cups-1.3.9-r1: LOG: postinst For information about installing a printer and general cups setup take a look at: http://www.gentoo.org/doc/en/printing-howto.xml >>> Messages generated by process 15193 on 2009-02-16 08:11:03 CET for package sys-devel/gcc-4.1.2: WARN: postinst If you have issues with packages unable to locate libstdc++.la, then try running 'fix_libtool_files.sh' on the old gcc versions. >>> Messages generated by process 15193 on 2009-02-16 08:21:31 CET for package app-crypt/gnupg-2.0.9: LOG: postinst If you wish to view images emerge: media-gfx/xloadimage, media-gfx/xli or any other viewer Remember to use photo-viewer option in configuration file to activate the right viewer >>> Messages generated by process 15193 on 2009-02-16 08:25:38 CET for package app-text/aspell-0.60.5: WARN: compile Appending a library link instruction (-lgpm); libraries to link to should not be passed through LDFLAGS LOG: postinst You will need to install a dictionary now. Please choose an aspell- dictionary from the app-dicts category After installing an aspell dictionary for your language(s), You may use the aspell-import utility to import your personal dictionaries from ispell, pspell and the older aspell WARN: postinst Please re-emerge ALL your aspell-LANG dictionaries >>> Messages generated by process 15193 on 2009-02-16 08:28:55 CET for package dev-lang/php-5.2.8-r2: WARN: setup USE flag 'truetype' needs one of these additional flag(s) set: gd gd-external 'gd' was automatically selected and enabled. You can change that by enabling/disabling those flags accordingly in /etc/portage/package.use. WARN: postinst If you have additional third party PHP extensions (such as dev-php5/phpdbg) you may need to recompile them now. USE="pic" slows down PHP but has to be enabled on setups where TEXTRELs are disabled (e.g. when using PaX in the kernel). On hardened profiles this USE flag is enabled automatically >>> Messages generated by process 15193 on 2009-02-16 08:49:47 CET for package mail-client/evolution-2.22.3.1: LOG: postinst To change the default browser if you are not using GNOME, do: gconftool-2 --set /desktop/gnome/url-handlers/http/command -t string 'mozilla %s' gconftool-2 --set /desktop/gnome/url-handlers/https/command -t string 'mozilla %s' Replace 'mozilla %s' with which ever browser you use. Junk filters are now a run-time choice. You will get a choice of bogofilter or spamassassin based on which you have installed You have to install one of these for the spam filtering to actually work >>> Messages generated by process 15193 on 2009-02-16 08:55:20 CET for package gnome-base/nautilus-2.22.5.1-r1: LOG: postinst nautilus can use gstreamer to preview audio files. Just make sure to have the necessary plugins available to play the media type you want to preview >>> Messages generated by process 15193 on 2009-02-16 08:59:28 CET for package media-gfx/imagemagick-6.4.4.6: LOG: compile disabling openmp support >>> Messages generated by process 15193 on 2009-02-16 09:06:07 CET for package gnome-extra/gnome-power-manager-2.22.1: LOG: postinst To enable frequency scaling interface, use the following command: gconftool-2 /apps/gnome-power-manager/ui/cpufreq_show -t bool -s true Note that this will conflict with other power managment utility like app-laptop/laptop-mode-tools. Suspend/hibernate-on-idle will only work if gnome-extra/gnome-screensaver is installed. >>> Messages generated by process 15193 on 2009-02-16 09:06:26 CET for package gnome-base/gnome-volume-manager-2.22.5: LOG: postinst To start the gnome-volume-manager daemon you need to configure it through it's preferences capplet. Also the HAL daemon (hald) needs to be running or it will shut down. If you experience problems with automounting (windows opened twice or nothing happening on media insertion) try changing the status of the automount USE flag. >>> Messages generated by process 15193 on 2009-02-16 09:12:29 CET for package gnome-base/gdm-2.20.7: LOG: postrm To remove GDM from startup please execute 'rc-update del xdm default' >>> Messages generated by process 15193 on 2009-02-16 09:12:30 CET for package gnome-base/gdm-2.20.7: LOG: postinst To make GDM start at boot, edit /etc/conf.d/xdm and then execute 'rc-update add xdm default'. GDM has changed the location of its configuration file. Please edit /etc/X11/gdm/custom.conf. The factory defaults are located at /usr/share/gdm/{defaults.conf,factory-defaults.conf} See README.install for more information about the change. >>> Messages generated by process 15193 on 2009-02-16 09:13:13 CET for package media-sound/sound-juicer-2.22.0-r1: WARN: postinst If sound-juicer does not rip to some music format, please check your USE flags on media-plugins/gst-plugins-meta >>> Messages generated by process 15193 on 2009-02-16 09:13:34 CET for package app-admin/sabayon-2.22.1: LOG: postinst To apply Sabayon defaults and mandatory settings to all users, put include "$(HOME)/.gconf.path.mandatory" in /etc/gconf/2/local-mandatory.path and put include "$(HOME)/.gconf.path.defaults" in /etc/gconf/2/local-defaults.path. You can safely create these files if they do not already exist. >>> Messages generated by process 15193 on 2009-02-16 09:19:11 CET for package gnome-extra/deskbar-applet-2.22.3.1: WARN: postinst The dictionary plugin in deskbar-applet uses the dictionary from gnome-extra/gnome-utils. If it is not present, the dictionary plugin will fail silently. >>> Messages generated by process 15193 on 2009-02-16 09:22:48 CET for package gnome-extra/gnome-games-2.22.3: WARN: setup USE='-guile' implies that Aisleriot won't be installed WARN: postinst Remember, in order to play games, you have to be in the 'games' group. Just run 'gpasswd -a games', then have re-login. >>> Messages generated by process 15193 on 2009-02-16 09:22:51 CET for package gnome-base/gnome-2.22.3: LOG: postinst Note that to change windowmanager to metacity do: export WINDOW_MANAGER="/usr/bin/metacity" of course this works for all other window managers as well The main file alteration monitoring functionality is now provided by >=glib-2.16. Note that on a modern Linux system you do not need the USE=fam flag on it if you have inotify support in your linux kernel ( >=2.6.13 ) enabled. USE=fam on glib is however useful for other situations, such as Gentoo/FreeBSD systems. A global USE=fam can also be useful for other packages that do not use the new file monitoring API yet that the new glib provides. Add yourself to the plugdev group if you want automounting to work. >>> Messages generated by process 3939 on 2009-02-16 23:40:26 CET for package x11-drivers/nvidia-drivers-177.82: LOG: postinst You must be in the video group to use the NVIDIA device For more info, read the docs at http://www.gentoo.org/doc/en/nvidia-guide.xml#doc_chap3_sect6 This ebuild installs a kernel module and X driver. Both must match explicitly in their version. This means, if you restart X, you most modprobe -r nvidia before starting it back up To use the NVIDIA GLX, run "eselect opengl set nvidia" nVidia has requested that any bug reports submitted have the output of /usr/bin/nvidia-bug-report.sh included. To work with compiz, you must enable the AddARGBGLXVisuals option. If you are having resolution problems, try disabling DynamicTwinView. >>> Messages generated by process 29410 on 2009-02-17 00:17:54 CET for package x11-misc/read-edid-1.4.1-r1: ERROR: compile ERROR: x11-misc/read-edid-1.4.1-r1 failed. Call stack: ebuild.sh, line 49: Called src_compile environment, line 2538: Called _eapi0_src_compile ebuild.sh, line 595: Called _eapi2_src_compile ebuild.sh, line 629: Called die The specific snippet of code: emake || die "emake failed" The die message: emake failed If you need support, post the topmost build error, and the call stack if relevant. A complete build log is located at '/var/log/portage/x11-misc:read-edid-1.4.1-r1:20090216-231748.log'. The ebuild environment file is located at '/var/tmp/portage/x11-misc/read-edid-1.4.1-r1/temp/environment'. >>> Messages generated by process 5933 on 2009-02-17 00:18:25 CET for package x11-misc/read-edid-1.4.1-r1: ERROR: compile ERROR: x11-misc/read-edid-1.4.1-r1 failed. Call stack: ebuild.sh, line 49: Called src_compile environment, line 2539: Called _eapi0_src_compile ebuild.sh, line 595: Called _eapi2_src_compile ebuild.sh, line 629: Called die The specific snippet of code: emake || die "emake failed" The die message: emake failed If you need support, post the topmost build error, and the call stack if relevant. A complete build log is located at '/var/log/portage/x11-misc:read-edid-1.4.1-r1:20090216-231820.log'. The ebuild environment file is located at '/var/tmp/portage/x11-misc/read-edid-1.4.1-r1/temp/environment'. >>> Messages generated by process 4236 on 2009-02-17 00:44:00 CET for package net-irc/xchat-2.8.6-r1: LOG: postinst XChat binary has been renamed from xchat-2 to xchat. >>> Messages generated by process 4315 on 2009-02-17 01:06:50 CET for package x11-misc/read-edid-1.4.1-r1: ERROR: compile ERROR: x11-misc/read-edid-1.4.1-r1 failed. Call stack: ebuild.sh, line 49: Called src_compile environment, line 2533: Called _eapi0_src_compile ebuild.sh, line 595: Called _eapi2_src_compile ebuild.sh, line 629: Called die The specific snippet of code: emake || die "emake failed" The die message: emake failed If you need support, post the topmost build error, and the call stack if relevant. A complete build log is located at '/var/log/portage/x11-misc:read-edid-1.4.1-r1:20090217-000643.log'. The ebuild environment file is located at '/var/tmp/portage/x11-misc/read-edid-1.4.1-r1/temp/environment'. >>> Messages generated by process 5061 on 2009-02-17 23:35:20 CET for package x11-misc/read-edid-1.4.1-r1: ERROR: compile ERROR: x11-misc/read-edid-1.4.1-r1 failed. Call stack: ebuild.sh, line 49: Called src_compile environment, line 2536: Called _eapi0_src_compile ebuild.sh, line 595: Called _eapi2_src_compile ebuild.sh, line 629: Called die The specific snippet of code: emake || die "emake failed" The die message: emake failed If you need support, post the topmost build error, and the call stack if relevant. A complete build log is located at '/var/log/portage/x11-misc:read-edid-1.4.1-r1:20090217-223511.log'. The ebuild environment file is located at '/var/tmp/portage/x11-misc/read-edid-1.4.1-r1/temp/environment'. >>> Messages generated by process 6454 on 2009-02-18 00:01:20 CET for package x11-misc/read-edid-1.4.1-r1: ERROR: compile ERROR: x11-misc/read-edid-1.4.1-r1 failed. Call stack: ebuild.sh, line 49: Called src_compile environment, line 2536: Called _eapi0_src_compile ebuild.sh, line 595: Called _eapi2_src_compile ebuild.sh, line 629: Called die The specific snippet of code: emake || die "emake failed" The die message: emake failed If you need support, post the topmost build error, and the call stack if relevant. A complete build log is located at '/var/log/portage/x11-misc:read-edid-1.4.1-r1:20090217-230115.log'. The ebuild environment file is located at '/var/tmp/portage/x11-misc/read-edid-1.4.1-r1/temp/environment'. >>> Messages generated by process 7772 on 2009-02-18 00:02:22 CET for package x11-misc/read-edid-1.4.1-r1: ERROR: compile ERROR: x11-misc/read-edid-1.4.1-r1 failed. Call stack: ebuild.sh, line 49: Called src_compile environment, line 2536: Called _eapi0_src_compile ebuild.sh, line 595: Called _eapi2_src_compile ebuild.sh, line 629: Called die The specific snippet of code: emake || die "emake failed" The die message: emake failed If you need support, post the topmost build error, and the call stack if relevant. A complete build log is located at '/var/log/portage/x11-misc:read-edid-1.4.1-r1:20090217-230217.log'. The ebuild environment file is located at '/var/tmp/portage/x11-misc/read-edid-1.4.1-r1/temp/environment'. >>> Messages generated by process 9089 on 2009-02-18 00:02:41 CET for package sys-apps/lm_sensors-2.10.7: ERROR: setup lm_sensors-2.10.7 requires CONFIG_HWMON to be enabled for 2.6.14+ kernels. ERROR: sys-apps/lm_sensors-2.10.7 failed. Call stack: ebuild.sh, line 49: Called pkg_setup lm_sensors-2.10.7.ebuild, line 57: Called die The specific snippet of code: die "CONFIG_HWMON not detected" The die message: CONFIG_HWMON not detected If you need support, post the topmost build error, and the call stack if relevant. A complete build log is located at '/var/log/portage/sys-apps:lm_sensors-2.10.7:20090217-230239.log'. The ebuild environment file is located at '/var/tmp/portage/sys-apps/lm_sensors-2.10.7/temp/die.env'. >>> Messages generated by process 25962 on 2009-02-18 01:07:07 CET for package x11-drivers/nvidia-drivers-177.82: LOG: postinst You must be in the video group to use the NVIDIA device For more info, read the docs at http://www.gentoo.org/doc/en/nvidia-guide.xml#doc_chap3_sect6 This ebuild installs a kernel module and X driver. Both must match explicitly in their version. This means, if you restart X, you most modprobe -r nvidia before starting it back up To use the NVIDIA GLX, run "eselect opengl set nvidia" nVidia has requested that any bug reports submitted have the output of /usr/bin/nvidia-bug-report.sh included. To work with compiz, you must enable the AddARGBGLXVisuals option. If you are having resolution problems, try disabling DynamicTwinView. >>> Messages generated by process 30848 on 2009-02-18 01:08:13 CET for package sys-apps/lm_sensors-2.10.7: WARN: setup sensors-detect requires CONFIG_I2C_CHARDEV to be enabled for non-2.4.x kernels. LOG: postinst Please run `/usr/sbin/sensors-detect' in order to setup /etc/conf.d/lm_sensors. /etc/conf.d/lm_sensors is vital to the init-script. Please make sure you also add lm_sensors to the desired runlevel. Otherwise your I2C modules won't get loaded on the next startup. You will also need to run the above command if you're upgrading from <=lm_sensors-2.9.0, as the needed entries in /etc/conf.d/lm_sensors has changed. Be warned, the probing of hardware in your system performed by sensors-detect could freeze your system. Also make sure you read the documentation before running lm_sensors on IBM ThinkPads. Please refer to the lm_sensors documentation for more information. (http://www.lm-sensors.org/wiki/Documentation) >>> Messages generated by process 13432 on 2009-02-18 01:19:51 CET for package x11-drivers/nvidia-drivers-177.82: LOG: postinst You must be in the video group to use the NVIDIA device For more info, read the docs at http://www.gentoo.org/doc/en/nvidia-guide.xml#doc_chap3_sect6 This ebuild installs a kernel module and X driver. Both must match explicitly in their version. This means, if you restart X, you most modprobe -r nvidia before starting it back up To use the NVIDIA GLX, run "eselect opengl set nvidia" nVidia has requested that any bug reports submitted have the output of /usr/bin/nvidia-bug-report.sh included. To work with compiz, you must enable the AddARGBGLXVisuals option. If you are having resolution problems, try disabling DynamicTwinView. >>> Messages generated by process 18319 on 2009-02-18 01:22:33 CET for package sys-apps/lm_sensors-2.10.7: LOG: postinst Please run `/usr/sbin/sensors-detect' in order to setup /etc/conf.d/lm_sensors. /etc/conf.d/lm_sensors is vital to the init-script. Please make sure you also add lm_sensors to the desired runlevel. Otherwise your I2C modules won't get loaded on the next startup. You will also need to run the above command if you're upgrading from <=lm_sensors-2.9.0, as the needed entries in /etc/conf.d/lm_sensors has changed. Be warned, the probing of hardware in your system performed by sensors-detect could freeze your system. Also make sure you read the documentation before running lm_sensors on IBM ThinkPads. Please refer to the lm_sensors documentation for more information. (http://www.lm-sensors.org/wiki/Documentation) >>> Messages generated by process 27195 on 2009-02-18 01:38:02 CET for package sys-apps/lm_sensors-2.10.7: LOG: postinst Please run `/usr/sbin/sensors-detect' in order to setup /etc/conf.d/lm_sensors. /etc/conf.d/lm_sensors is vital to the init-script. Please make sure you also add lm_sensors to the desired runlevel. Otherwise your I2C modules won't get loaded on the next startup. You will also need to run the above command if you're upgrading from <=lm_sensors-2.9.0, as the needed entries in /etc/conf.d/lm_sensors has changed. Be warned, the probing of hardware in your system performed by sensors-detect could freeze your system. Also make sure you read the documentation before running lm_sensors on IBM ThinkPads. Please refer to the lm_sensors documentation for more information. (http://www.lm-sensors.org/wiki/Documentation) >>> Messages generated by process 30756 on 2009-02-18 01:38:44 CET for package x11-drivers/nvidia-drivers-177.82: LOG: postinst You must be in the video group to use the NVIDIA device For more info, read the docs at http://www.gentoo.org/doc/en/nvidia-guide.xml#doc_chap3_sect6 This ebuild installs a kernel module and X driver. Both must match explicitly in their version. This means, if you restart X, you most modprobe -r nvidia before starting it back up To use the NVIDIA GLX, run "eselect opengl set nvidia" nVidia has requested that any bug reports submitted have the output of /usr/bin/nvidia-bug-report.sh included. To work with compiz, you must enable the AddARGBGLXVisuals option. If you are having resolution problems, try disabling DynamicTwinView. >>> Messages generated by process 4229 on 2009-02-18 23:50:13 CET for package dev-libs/apr-1.3.3: WARN: postinst We are now using the system's libtool rather than bundling our own. You will need to rebuild Apache and possibly other software if you get a message similiar to the following: /usr/share/apr-1/build-1/libtool: No such file or directory >>> Messages generated by process 4229 on 2009-02-18 23:51:37 CET for package net-misc/neon-0.28.3: WARN: postinst Neon has a policy of breaking API across minor versions, this means that any package that links against neon may be broken after updating. They will remain broken until they are ported to the new API. You can downgrade neon to the previous version by doing: emerge --oneshot '>> Messages generated by process 4229 on 2009-02-18 23:53:48 CET for package app-text/opensp-1.5.2-r1: WARN: postinst Please note that the soname of the library changed. If you are upgrading from a previous version you need to fix dynamic linking inconsistencies by executing: revdep-rebuild --library='libosp.so.*' >>> Messages generated by process 4229 on 2009-02-18 23:54:34 CET for package dev-util/cvs-1.12.12-r4: LOG: unpack If you want any CVS server functionality, you MUST emerge with USE=server! >>> Messages generated by process 4229 on 2009-02-18 23:56:39 CET for package dev-util/quilt-0.46: LOG: setup If you intend to use the folding functionality (graphical illustration of the patch stack) then you'll need to remerge this package with USE=graphviz. >>> Messages generated by process 4229 on 2009-02-18 23:59:39 CET for package dev-util/subversion-1.5.5: LOG: postinst Subversion Server Notes ----------------------- If you intend to run a server, a repository needs to be created using svnadmin (see man svnadmin) or the following command to create it in /var/svn: emerge --config =dev-util/subversion-1.5.5 Subversion has multiple server types, take your pick: - svnserve daemon: 1. Edit /etc/conf.d/svnserve 2. Fix the repository permissions (see "Fixing the repository permissions") 3. Start daemon: /etc/init.d/svnserve start 4. Make persistent: rc-update add svnserve default - svnserve via xinetd: 1. Edit /etc/xinetd.d/svnserve (remove disable line) 2. Fix the repository permissions (see "Fixing the repository permissions") 3. Restart xinetd.d: /etc/init.d/xinetd restart - svn over ssh: 1. Fix the repository permissions (see "Fixing the repository permissions") Additionally run: groupadd svnusers chown -R root:svnusers /var/svn/repos 2. Create an svnserve wrapper in /usr/local/bin to set the umask you want, for example: #!/bin/bash . /etc/conf.d/svnserve umask 007 exec /usr/bin/svnserve ${SVNSERVE_OPTS} "$@" Fixing the repository permissions: chmod -Rf go-rwx /var/svn/conf chmod -Rf g-w,o-rwx /var/svn/repos chmod -Rf g+rw /var/svn/repos/db chmod -Rf g+rw /var/svn/repos/locks If you intend to use svn-hot-backup, you can specify the number of backups to keep per repository by specifying an environment variable. If you want to keep e.g. 2 backups, do the following: echo '# hot-backup: Keep that many repository backups around' > /etc/env.d/80subversion echo 'SVN_HOTBACKUP_BACKUPS_NUMBER=2' >> /etc/env.d/80subversion >>> Messages generated by process 4229 on 2009-02-19 00:08:28 CET for package dev-libs/boost-1.34.1-r2: LOG: compile Using the following options to build: release debug-symbols=none optimization=none --user-config=/var/tmp/portage/dev-libs/boost-1.34.1-r2/work/boost_1_34_1/user-config.jam >>> Messages generated by process 23313 on 2009-02-19 00:12:18 CET for package dev-util/git-1.6.0.6: LOG: postinst These additional scripts need some dependencies: git-quiltimport : dev-util/quilt git-instaweb : || ( www-servers/lighttpd www-servers/apache ) >>> Messages generated by process 10098 on 2009-02-20 00:49:57 CET for package sys-apps/hal-0.5.11-r8: LOG: postinst The HAL daemon needs to be running for certain applications to work. Suggested is to add the init script to your start-up scripts, this should be done like this : `rc-update add hald default` Looking for automounting support? Add yourself to the plugdev group IF you have additional applications which consume ACPI events, you should consider installing acpid to allow applications to share ACPI events. If you wish to use a non US layout, you may do so by executing: setxkbmap or by utilizing your Desktop Environment's Keyboard Layout Settings mechanism. Under GNOME, this is gnome-keyboard-properties, and under KDE it is kxkb. In order have suspend/hibernate function with HAL or apps that use HAL (such as gnome-power-manager), you should build HAL with the laptop useflag which will install pm-utils. X Input Hotplugging (if you build xorg-server with the HAL useflag) reads user specific configuration from /etc/hal/fdi/policy/. You should remove the Input sections from your xorg.conf once you have migrated the rules to a HAL fdi file. >>> Messages generated by process 5824 on 2009-02-20 01:03:24 CET for package net-www/netscape-flash-10.0.15.3: WARN: postinst Flash player is closed-source, with a long history of security issues. Please consider only running flash applets you know to be safe. >>> Messages generated by process 27905 on 2009-02-28 14:35:36 CET for package sys-apps/lm_sensors-2.10.7: LOG: postinst Please run `/usr/sbin/sensors-detect' in order to setup /etc/conf.d/lm_sensors. /etc/conf.d/lm_sensors is vital to the init-script. Please make sure you also add lm_sensors to the desired runlevel. Otherwise your I2C modules won't get loaded on the next startup. You will also need to run the above command if you're upgrading from <=lm_sensors-2.9.0, as the needed entries in /etc/conf.d/lm_sensors has changed. Be warned, the probing of hardware in your system performed by sensors-detect could freeze your system. Also make sure you read the documentation before running lm_sensors on IBM ThinkPads. Please refer to the lm_sensors documentation for more information. (http://www.lm-sensors.org/wiki/Documentation) >>> Messages generated by process 30831 on 2009-02-28 14:36:21 CET for package x11-drivers/nvidia-drivers-177.82: LOG: postinst You must be in the video group to use the NVIDIA device For more info, read the docs at http://www.gentoo.org/doc/en/nvidia-guide.xml#doc_chap3_sect6 This ebuild installs a kernel module and X driver. Both must match explicitly in their version. This means, if you restart X, you most modprobe -r nvidia before starting it back up To use the NVIDIA GLX, run "eselect opengl set nvidia" nVidia has requested that any bug reports submitted have the output of /usr/bin/nvidia-bug-report.sh included. To work with compiz, you must enable the AddARGBGLXVisuals option. If you are having resolution problems, try disabling DynamicTwinView. >>> Messages generated by process 20259 on 2009-03-02 22:58:48 CET for package dev-db/sqlite-3.6.10: LOG: postinst sqlite-3.6.X is not totally backwards compatible, see http://www.sqlite.org/releaselog/3_6_0.html for full details. >>> Messages generated by process 20259 on 2009-03-02 23:01:11 CET for package app-text/poppler-bindings-0.10.4: WARN: postinst You need to rebuild everything depending on poppler, use revdep-rebuild >>> Messages generated by process 20259 on 2009-03-02 23:10:40 CET for package media-gfx/imagemagick-6.4.8.3: LOG: configure disabling openmp support >>> Messages generated by process 20259 on 2009-03-02 23:11:43 CET for package gnome-base/gdm-2.20.7: LOG: postrm To remove GDM from startup please execute 'rc-update del xdm default' >>> Messages generated by process 20259 on 2009-03-02 23:11:44 CET for package gnome-base/gdm-2.20.9-r1: LOG: postinst To make GDM start at boot, edit /etc/conf.d/xdm and then execute 'rc-update add xdm default'. GDM has changed the location of its configuration file. Please edit /etc/X11/gdm/custom.conf. The factory defaults are located at /usr/share/gdm/{defaults.conf,factory-defaults.conf} See README.install for more information about the change. >>> Messages generated by process 21159 on 2009-03-08 23:54:46 CET for package net-wireless/bluez-libs-3.36: LOG: postinst If you are upgrading from =net-wireless/bluez-libs-2*, the ABI version of libbluetooth has changed. Please run: revdep-rebuild --library libbluetooth.so.1 >>> Messages generated by process 21159 on 2009-03-08 23:55:18 CET for package media-libs/freetype-2.3.8: LOG: postinst The utilities and demos previously bundled with freetype are now optional. Enable the utils USE flag if you would like them to be installed. >>> Messages generated by process 21159 on 2009-03-08 23:55:24 CET for package net-www/netscape-flash-10.0.22.87: WARN: postinst Flash player is closed-source, with a long history of security issues. Please consider only running flash applets you know to be safe. The 'flashblock' extension may help for mozilla users: https://addons.mozilla.org/en-US/firefox/addon/433 >>> Messages generated by process 21159 on 2009-03-08 23:56:25 CET for package app-text/aspell-0.60.6: WARN: compile Appending a library link instruction (-lgpm); libraries to link to should not be passed through LDFLAGS LOG: postinst You will need to install a dictionary now. Please choose an aspell- dictionary from the app-dicts category After installing an aspell dictionary for your language(s), You may use the aspell-import utility to import your personal dictionaries from ispell, pspell and the older aspell WARN: postinst Please re-install ALL your aspell-LANG dictionaries >>> Messages generated by process 27652 on 2009-03-09 00:07:01 CET for package media-video/totem-2.22.2-r1: WARN: postinst If totem doesn't play some video format, please check your USE flags on media-plugins/gst-plugins-meta >>> Messages generated by process 14275 on 2009-03-09 00:10:10 CET for package net-print/gutenprint-5.1.4: LOG: postinst Updating installed printer ppd files No Gutenprint PPD files to update. >>> Messages generated by process 4406 on 2009-03-09 23:09:58 CET for package net-print/gutenprint-5.2.3: LOG: postinst Updating installed printer ppd files Updated /etc/cups/ppd/Canon_BJC-6500_USB_1.ppd using /usr/share/cups/model/gutenprint/5.2/C/stp-bjc-6500.5.2.ppd.gz Updated 1 PPD file.Restart cupsd for the changes to take effect. >>> Messages generated by process 3032 on 2009-03-09 23:15:27 CET for package sys-auth/pambase-20081028: LOG: postinst Starting from version 20080801, pambase optionally enables SHA512-hashed passwords. For this to work, you need sys-libs/pam-1.0.1 built against sys-libs/glibc-2.7 or later. If you don't have support for this, it will automatically fallback to MD5-hashed passwords, just like before. Please note that the change only affects the newly-changed passwords and that SHA512-hashed passwords will not work on earlier versions of glibc or Linux-PAM. >>> Messages generated by process 3032 on 2009-03-09 23:16:18 CET for package sys-apps/busybox-1.13.2: WARN: unpack Could not locate user configfile, so we will save a default one LOG: install Your configuration for sys-apps/busybox-1.13.2 has been saved in /etc/portage/savedconfig/sys-apps/busybox-1.13.2 for your editing pleasure. You can edit these files by hand and remerge this package with USE=savedconfig to customise the configuration. You can rename this file/directory to one of the following for its configuration to apply to multiple versions: ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/ [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}] >>> Messages generated by process 1739 on 2009-03-18 00:50:36 CET for package app-text/hunspell-1.2.8: LOG: postinst To use this package you will also need a dictionary. Hunspell uses myspell format dictionaries; find them in the app-dicts category as myspell-. >>> Messages generated by process 1739 on 2009-03-18 01:00:19 CET for package x11-libs/libxklavier-3.8: WARN: postinst Please note that the soname of the library changed! If you are upgrading from a version prior to 3.4 you need to fix dynamic linking inconsistencies by executing: revdep-rebuild -X --library libxklavier.so.11 >>> Messages generated by process 1739 on 2009-03-18 01:00:45 CET for package app-text/enchant-1.4.2: WARN: postinst Starting with enchant-1.4.0 default spell checking engine has changed from aspell to hunspell. In case you used aspell dictionaries to check spelling you need either reemerge enchant with aspell USE flag or you need to emerge myspell- dictionaries. aspell is faster but has less features then hunspell and most distributions by default use hunspell only. Nevertheless in Gentoo it's still your choice which library to use... >>> Messages generated by process 1739 on 2009-03-18 01:03:12 CET for package x11-drivers/nvidia-drivers-180.29: LOG: postinst You must be in the video group to use the NVIDIA device For more info, read the docs at http://www.gentoo.org/doc/en/nvidia-guide.xml#doc_chap3_sect6 This ebuild installs a kernel module and X driver. Both must match explicitly in their version. This means, if you restart X, you most modprobe -r nvidia before starting it back up To use the NVIDIA GLX, run "eselect opengl set nvidia" nVidia has requested that any bug reports submitted have the output of /usr/bin/nvidia-bug-report.sh included. To work with compiz, you must enable the AddARGBGLXVisuals option. If you are having resolution problems, try disabling DynamicTwinView. >>> Messages generated by process 1739 on 2009-03-18 01:09:15 CET for package gnome-base/gnome-desktop-2.24.3: WARN: postinst If you are upgrading from >> Messages generated by process 1739 on 2009-03-18 01:17:40 CET for package gnome-extra/evolution-data-server-2.24.5-r2: LOG: postinst LDAP schemas needed by evolution are installed in /etc/openldap/schema >>> Messages generated by process 1739 on 2009-03-18 01:24:12 CET for package gnome-extra/gnome-media-2.24.0.1-r1: WARN: postinst If you cannot play some music format, please check your USE flags on media-plugins/gst-plugins-meta >>> Messages generated by process 1739 on 2009-03-18 01:25:41 CET for package dev-python/gtksourceview-python-2.24.1: LOG: postinst This package provides python bindings for x11-libs/gtksourceview-1.8. If you want to 2.* python bindings, use dev-python/pygtksourceview-2 >>> Messages generated by process 1739 on 2009-03-18 01:46:45 CET for package gnome-extra/deskbar-applet-2.24.3: WARN: postinst The dictionary plugin in deskbar-applet uses the dictionary from gnome-extra/gnome-utils. If it is not present, the dictionary plugin will fail silently. >>> Messages generated by process 1739 on 2009-03-18 01:49:22 CET for package media-sound/sound-juicer-2.24.0: WARN: postinst If sound-juicer does not rip to some music format, please check your USE flags on media-plugins/gst-plugins-meta >>> Messages generated by process 1739 on 2009-03-18 01:55:05 CET for package gnome-extra/gnome-games-2.24.3: WARN: setup USE='-guile' implies that Aisleriot won't be installed WARN: postinst Remember, in order to play games, you have to be in the 'games' group. Just run 'gpasswd -a games', then have re-login. >>> Messages generated by process 1739 on 2009-03-18 02:11:55 CET for package mail-client/evolution-2.24.5: LOG: postinst To change the default browser if you are not using GNOME, do: gconftool-2 --set /desktop/gnome/url-handlers/http/command -t string 'mozilla %s' gconftool-2 --set /desktop/gnome/url-handlers/https/command -t string 'mozilla %s' Replace 'mozilla %s' with which ever browser you use. Junk filters are now a run-time choice. You will get a choice of bogofilter or spamassassin based on which you have installed You have to install one of these for the spam filtering to actually work >>> Messages generated by process 1739 on 2009-03-18 02:12:13 CET for package gnome-base/gnome-volume-manager-2.24.1: LOG: postinst To start the gnome-volume-manager daemon you need to configure it through it's preferences capplet. Also the HAL daemon (hald) needs to be running or it will shut down. If you experience problems with automounting (windows opened twice or nothing happening on media insertion) try changing the status of the automount USE flag. >>> Messages generated by process 1739 on 2009-03-18 02:19:33 CET for package x11-libs/gtk+-2.14.7-r2: LOG: postinst Please install app-text/evince for print preview functionality. Alternatively, check "gtk-print-preview-command" documentation and add it to your gtkrc. >>> Messages generated by process 1739 on 2009-03-18 02:26:44 CET for package app-arch/file-roller-2.24.3: LOG: postinst file-roller is a frontend for several archiving utilities. If you want a particular achive format support, see http://fileroller.sourceforge.net/ and install the relevant package. for example: 7-zip - app-arch/p7zip ace - app-arch/unace arj - app-arch/arj lzma - app-arch/lzma lzop - app-arch/lzop cpio - app-arch/cpio iso - app-arch/cdrtools jar,zip - app-arch/zip and app-arch/unzip lha - app-arch/lha rar - app-arch/unrar rpm - app-arch/rpm unstuff - app-arch/stuffit zoo - app-arch/zoo >>> Messages generated by process 1739 on 2009-03-18 02:27:53 CET for package gnome-extra/gnome-screensaver-2.24.1-r1: LOG: postinst Information for converting screensavers is located in /usr/share/doc/gnome-screensaver-2.24.1-r1/xss-conversion.txt. >>> Messages generated by process 1739 on 2009-03-18 02:29:38 CET for package gnome-base/nautilus-2.24.2: LOG: postinst nautilus can use gstreamer to preview audio files. Just make sure to have the necessary plugins available to play the media type you want to preview >>> Messages generated by process 1739 on 2009-03-18 02:34:03 CET for package media-video/totem-2.24.3: WARN: postinst If totem doesn't play some video format, please check your USE flags on media-plugins/gst-plugins-meta >>> Messages generated by process 1739 on 2009-03-18 02:43:00 CET for package gnome-base/gnome-2.24.1: LOG: postinst The main file alteration monitoring functionality is provided by >=glib-2.16. Note that on a modern Linux system you do not need the USE=fam flag on it if you have inotify support in your linux kernel ( >=2.6.13 ) enabled. USE=fam on glib is however useful for other situations, such as Gentoo/FreeBSD systems. A global USE=fam can also be useful for other packages that do not use the new file monitoring API yet that the new glib provides. Add yourself to the plugdev group if you want automounting to work. >>> Messages generated by process 5076 on 2009-03-18 22:47:49 CET for package x11-drivers/nvidia-drivers-180.29: LOG: postinst You must be in the video group to use the NVIDIA device For more info, read the docs at http://www.gentoo.org/doc/en/nvidia-guide.xml#doc_chap3_sect6 This ebuild installs a kernel module and X driver. Both must match explicitly in their version. This means, if you restart X, you most modprobe -r nvidia before starting it back up To use the NVIDIA GLX, run "eselect opengl set nvidia" nVidia has requested that any bug reports submitted have the output of /usr/bin/nvidia-bug-report.sh included. To work with compiz, you must enable the AddARGBGLXVisuals option. If you are having resolution problems, try disabling DynamicTwinView. >>> Messages generated by process 13621 on 2009-03-18 22:48:51 CET for package gnome-base/gnome-2.24.1: LOG: postinst The main file alteration monitoring functionality is provided by >=glib-2.16. Note that on a modern Linux system you do not need the USE=fam flag on it if you have inotify support in your linux kernel ( >=2.6.13 ) enabled. USE=fam on glib is however useful for other situations, such as Gentoo/FreeBSD systems. A global USE=fam can also be useful for other packages that do not use the new file monitoring API yet that the new glib provides. Add yourself to the plugdev group if you want automounting to work. >>> Messages generated by process 8473 on 2009-03-19 00:13:26 CET for package x11-libs/libxklavier-3.6: WARN: postinst Please note that the soname of the library changed! If you are upgrading from a version prior to 3.4 you need to fix dynamic linking inconsistencies by executing: revdep-rebuild -X --library libxklavier.so.11 >>> Messages generated by process 6269 on 2009-03-22 00:00:24 CET for package media-sound/alsa-utils-1.0.17: LOG: postinst To take advantage of the init script, and automate the process of loading and unloading the ALSA sound drivers as well as storing and restoring sound-card mixer levels you should add alsasound to the boot runlevel. You can do this as root like so: # rc-update add alsasound boot >>> Messages generated by process 5459 on 2009-03-26 22:58:18 CET for package app-crypt/gnupg-2.0.10: LOG: postinst If you wish to view images emerge: media-gfx/xloadimage, media-gfx/xli or any other viewer Remember to use photo-viewer option in configuration file to activate the right viewer