This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by Warzone 2100 configure 2.2.0, which was generated by GNU Autoconf 2.61. Invocation command line was $ ./configure ## --------- ## ## Platform. ## ## --------- ## hostname = thanatos uname -m = x86_64 uname -r = 2.6.26-2-amd64 uname -s = Linux uname -v = #1 SMP Wed May 13 15:37:46 UTC 2009 /usr/bin/uname -p = unknown /bin/uname -X = unknown /bin/arch = unknown /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /usr/local/bin PATH: /usr/bin PATH: /bin PATH: /usr/games ## ----------- ## ## Core tests. ## ## ----------- ## configure:1965: checking for a BSD-compatible install configure:2021: result: /usr/bin/install -c configure:2032: checking whether build environment is sane configure:2075: result: yes configure:2103: checking for a thread-safe mkdir -p configure:2142: result: /bin/mkdir -p configure:2155: checking for gawk configure:2185: result: no configure:2155: checking for mawk configure:2171: found /usr/bin/mawk configure:2182: result: mawk configure:2193: checking whether make sets $(MAKE) configure:2214: result: yes configure:2420: checking build system type configure:2438: result: x86_64-unknown-linux-gnu configure:2460: checking host system type configure:2475: result: x86_64-unknown-linux-gnu configure:2511: checking for style of include used by make configure:2539: result: GNU configure:2609: checking for gcc configure:2625: found /usr/bin/gcc configure:2636: result: gcc configure:2874: checking for C compiler version configure:2881: gcc --version >&5 gcc (Debian 4.3.2-1.1) 4.3.2 Copyright (C) 2008 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:2884: $? = 0 configure:2891: gcc -v >&5 Using built-in specs. Target: x86_64-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Debian 4.3.2-1.1' --with-bugurl=file:///usr/share/doc/gcc-4.3/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --with-gxx-include-dir=/usr/include/c++/4.3 --program-suffix=-4.3 --enable-clocale=gnu --enable-libstdcxx-debug --enable-objc-gc --enable-mpfr --enable-cld --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu Thread model: posix gcc version 4.3.2 (Debian 4.3.2-1.1) configure:2894: $? = 0 configure:2901: gcc -V >&5 gcc: '-V' option must have argument configure:2904: $? = 1 configure:2927: checking for C compiler default output file name configure:2954: gcc conftest.c >&5 configure:2957: $? = 0 configure:2995: result: a.out configure:3012: checking whether the C compiler works configure:3022: ./a.out configure:3025: $? = 0 configure:3042: result: yes configure:3049: checking whether we are cross compiling configure:3051: result: no configure:3054: checking for suffix of executables configure:3061: gcc -o conftest conftest.c >&5 configure:3064: $? = 0 configure:3088: result: configure:3094: checking for suffix of object files configure:3120: gcc -c conftest.c >&5 configure:3123: $? = 0 configure:3146: result: o configure:3150: checking whether we are using the GNU C compiler configure:3179: gcc -c conftest.c >&5 configure:3185: $? = 0 configure:3202: result: yes configure:3207: checking whether gcc accepts -g configure:3237: gcc -c -g conftest.c >&5 configure:3243: $? = 0 configure:3342: result: yes configure:3359: checking for gcc option to accept ISO C89 configure:3433: gcc -c conftest.c >&5 configure:3439: $? = 0 configure:3462: result: none needed configure:3482: checking dependency style of gcc configure:3573: result: gcc3 configure:3590: checking for gcc option to accept ISO C99 configure:3749: gcc -c conftest.c >&5 conftest.c:60: error: expected ';', ',' or ')' before 'text' conftest.c: In function 'main': conftest.c:114: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'newvar' conftest.c:114: error: 'newvar' undeclared (first use in this function) conftest.c:114: error: (Each undeclared identifier is reported only once conftest.c:114: error: for each function it appears in.) conftest.c:124: error: 'for' loop initial declaration used outside C99 mode configure:3755: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "Warzone 2100" | #define PACKAGE_TARNAME "warzone2100" | #define PACKAGE_VERSION "2.2.0" | #define PACKAGE_STRING "Warzone 2100 2.2.0" | #define PACKAGE_BUGREPORT "http://wz2100.net/" | #define PACKAGE "warzone2100" | #define VERSION "2.2.0" | /* end confdefs.h. */ | #include | #include | #include | #include | #include | | // Check varargs macros. These examples are taken from C99 6.10.3.5. | #define debug(...) fprintf (stderr, __VA_ARGS__) | #define showlist(...) puts (#__VA_ARGS__) | #define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__)) | static void | test_varargs_macros (void) | { | int x = 1234; | int y = 5678; | debug ("Flag"); | debug ("X = %d\n", x); | showlist (The first, second, and third items.); | report (x>y, "x is %d but y is %d", x, y); | } | | // Check long long types. | #define BIG64 18446744073709551615ull | #define BIG32 4294967295ul | #define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0) | #if !BIG_OK | your preprocessor is broken; | #endif | #if BIG_OK | #else | your preprocessor is broken; | #endif | static long long int bignum = -9223372036854775807LL; | static unsigned long long int ubignum = BIG64; | | struct incomplete_array | { | int datasize; | double data[]; | }; | | struct named_init { | int number; | const wchar_t *name; | double average; | }; | | typedef const char *ccp; | | static inline int | test_restrict (ccp restrict text) | { | // See if C++-style comments work. | // Iterate through items via the restricted pointer. | // Also check for declarations in for loops. | for (unsigned int i = 0; *(text+i) != '\0'; ++i) | continue; | return 0; | } | | // Check varargs and va_copy. | static void | test_varargs (const char *format, ...) | { | va_list args; | va_start (args, format); | va_list args_copy; | va_copy (args_copy, args); | | const char *str; | int number; | float fnumber; | | while (*format) | { | switch (*format++) | { | case 's': // string | str = va_arg (args_copy, const char *); | break; | case 'd': // int | number = va_arg (args_copy, int); | break; | case 'f': // float | fnumber = va_arg (args_copy, double); | break; | default: | break; | } | } | va_end (args_copy); | va_end (args); | } | | int | main () | { | | // Check bool. | _Bool success = false; | | // Check restrict. | if (test_restrict ("String literal") == 0) | success = true; | char *restrict newvar = "Another string"; | | // Check varargs. | test_varargs ("s, d' f .", "string", 65, 34.234); | test_varargs_macros (); | | // Check flexible array members. | struct incomplete_array *ia = | malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10)); | ia->datasize = 10; | for (int i = 0; i < ia->datasize; ++i) | ia->data[i] = i * 1.234; | | // Check named initializers. | struct named_init ni = { | .number = 34, | .name = L"Test wide string", | .average = 543.34343, | }; | | ni.number = 58; | | int dynamic_array[ni.number]; | dynamic_array[ni.number - 1] = 543; | | // work around unused variable warnings | return (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == 'x' | || dynamic_array[ni.number - 1] != 543); | | ; | return 0; | } configure:3749: gcc -std=gnu99 -c conftest.c >&5 configure:3755: $? = 0 configure:3785: result: -std=gnu99 configure:3915: checking for gcc -std=gnu99 option to accept ISO Standard C configure:3926: result: -std=gnu99 configure:3974: checking for ranlib configure:3990: found /usr/bin/ranlib configure:4001: result: ranlib configure:4087: checking for g++ configure:4103: found /usr/bin/g++ configure:4114: result: g++ configure:4145: checking for C++ compiler version configure:4152: g++ --version >&5 g++ (Debian 4.3.2-1.1) 4.3.2 Copyright (C) 2008 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:4155: $? = 0 configure:4162: g++ -v >&5 Using built-in specs. Target: x86_64-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Debian 4.3.2-1.1' --with-bugurl=file:///usr/share/doc/gcc-4.3/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --with-gxx-include-dir=/usr/include/c++/4.3 --program-suffix=-4.3 --enable-clocale=gnu --enable-libstdcxx-debug --enable-objc-gc --enable-mpfr --enable-cld --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu Thread model: posix gcc version 4.3.2 (Debian 4.3.2-1.1) configure:4165: $? = 0 configure:4172: g++ -V >&5 g++: '-V' option must have argument configure:4175: $? = 1 configure:4178: checking whether we are using the GNU C++ compiler configure:4207: g++ -c conftest.cpp >&5 configure:4213: $? = 0 configure:4230: result: yes configure:4235: checking whether g++ accepts -g configure:4265: g++ -c -g conftest.cpp >&5 configure:4271: $? = 0 configure:4370: result: yes configure:4395: checking dependency style of g++ configure:4486: result: gcc3 configure:4506: checking for bison configure:4522: found /usr/bin/bison configure:4533: result: bison -y configure:4567: checking for bison >= 1.31 configure:4587: result: found 2.3, ok configure:4600: checking for flex configure:4616: found /usr/bin/flex configure:4627: result: flex configure:4664: flex conftest.l configure:4667: $? = 0 configure:4669: checking lex output file root configure:4685: result: lex.yy configure:4690: checking lex library configure:4709: gcc -std=gnu99 -o conftest conftest.c >&5 /tmp/ccANikAK.o: In function `yylex': conftest.c:(.text+0x715): undefined reference to `yywrap' /tmp/ccANikAK.o: In function `input': conftest.c:(.text+0x11d4): undefined reference to `yywrap' /tmp/ccANikAK.o: In function `main': conftest.c:(.text+0x1eb7): undefined reference to `yywrap' collect2: ld returned 1 exit status configure:4715: $? = 1 configure: failed program was: | | #line 3 "lex.yy.c" | | #define YY_INT_ALIGNED short int | | /* A lexical scanner generated by flex */ | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 5 | #define YY_FLEX_SUBMINOR_VERSION 35 | #if YY_FLEX_SUBMINOR_VERSION > 0 | #define FLEX_BETA | #endif | | /* First, we deal with platform-specific or compiler-specific issues. */ | | /* begin standard C headers. */ | #include | #include | #include | #include | | /* end standard C headers. */ | | /* flex integer type definitions */ | | #ifndef FLEXINT_H | #define FLEXINT_H | | /* C99 systems have . Non-C99 systems may or may not. */ | | #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L | | /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, | * if you want the limit (max/min) macros for int types. | */ | #ifndef __STDC_LIMIT_MACROS | #define __STDC_LIMIT_MACROS 1 | #endif | | #include | typedef int8_t flex_int8_t; | typedef uint8_t flex_uint8_t; | typedef int16_t flex_int16_t; | typedef uint16_t flex_uint16_t; | typedef int32_t flex_int32_t; | typedef uint32_t flex_uint32_t; | #else | typedef signed char flex_int8_t; | typedef short int flex_int16_t; | typedef int flex_int32_t; | typedef unsigned char flex_uint8_t; | typedef unsigned short int flex_uint16_t; | typedef unsigned int flex_uint32_t; | | /* Limits of integral types. */ | #ifndef INT8_MIN | #define INT8_MIN (-128) | #endif | #ifndef INT16_MIN | #define INT16_MIN (-32767-1) | #endif | #ifndef INT32_MIN | #define INT32_MIN (-2147483647-1) | #endif | #ifndef INT8_MAX | #define INT8_MAX (127) | #endif | #ifndef INT16_MAX | #define INT16_MAX (32767) | #endif | #ifndef INT32_MAX | #define INT32_MAX (2147483647) | #endif | #ifndef UINT8_MAX | #define UINT8_MAX (255U) | #endif | #ifndef UINT16_MAX | #define UINT16_MAX (65535U) | #endif | #ifndef UINT32_MAX | #define UINT32_MAX (4294967295U) | #endif | | #endif /* ! C99 */ | | #endif /* ! FLEXINT_H */ | | #ifdef __cplusplus | | /* The "const" storage-class-modifier is valid. */ | #define YY_USE_CONST | | #else /* ! __cplusplus */ | | /* C99 requires __STDC__ to be defined as 1. */ | #if defined (__STDC__) | | #define YY_USE_CONST | | #endif /* defined (__STDC__) */ | #endif /* ! __cplusplus */ | | #ifdef YY_USE_CONST | #define yyconst const | #else | #define yyconst | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an unsigned | * integer for use as an array index. If the signed char is negative, | * we want to instead treat it as an 8-bit unsigned char, hence the | * double cast. | */ | #define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN (yy_start) = 1 + 2 * | | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START (((yy_start) - 1) / 2) | #define YYSTATE YY_START | | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart(yyin ) | | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #ifndef YY_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k. | * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case. | * Ditto for the __ia64__ case accordingly. | */ | #define YY_BUF_SIZE 32768 | #else | #define YY_BUF_SIZE 16384 | #endif /* __ia64__ */ | #endif | | /* The state buf must be large enough to hold one state per character in the main buffer. | */ | #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) | | #ifndef YY_TYPEDEF_YY_BUFFER_STATE | #define YY_TYPEDEF_YY_BUFFER_STATE | typedef struct yy_buffer_state *YY_BUFFER_STATE; | #endif | | extern int yyleng; | | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | #define YY_LESS_LINENO(n) | | /* Return all but the first "n" matched characters back to the input stream. */ | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | *yy_cp = (yy_hold_char); \ | YY_RESTORE_YY_MORE_OFFSET \ | (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | | #define unput(c) yyunput( c, (yytext_ptr) ) | | #ifndef YY_TYPEDEF_YY_SIZE_T | #define YY_TYPEDEF_YY_SIZE_T | typedef size_t yy_size_t; | #endif | | #ifndef YY_STRUCT_YY_BUFFER_STATE | #define YY_STRUCT_YY_BUFFER_STATE | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | yy_size_t yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | int yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | int yy_bs_lineno; /**< The line count. */ | int yy_bs_column; /**< The column count. */ | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | | }; | #endif /* !YY_STRUCT_YY_BUFFER_STATE */ | | /* Stack of input buffers. */ | static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ | static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ | static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | * | * Returns the top of the stack, or NULL. | */ | #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ | ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ | : NULL) | | /* Same as previous macro, but useful when we know that the buffer stack is not | * NULL or when we need an lvalue. For internal use only. | */ | #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | static int yy_n_chars; /* number of characters read into yy_ch_buf */ | int yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = (char *) 0; | static int yy_init = 0; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart (FILE *input_file ); | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ); | YY_BUFFER_STATE yy_create_buffer (FILE *file,int size ); | void yy_delete_buffer (YY_BUFFER_STATE b ); | void yy_flush_buffer (YY_BUFFER_STATE b ); | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ); | void yypop_buffer_state (void ); | | static void yyensure_buffer_stack (void ); | static void yy_load_buffer_state (void ); | static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); | | #define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER ) | | YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); | YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); | YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len ); | | void *yyalloc (yy_size_t ); | void *yyrealloc (void *,yy_size_t ); | void yyfree (void * ); | | #define yy_new_buffer yy_create_buffer | | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! YY_CURRENT_BUFFER ){ \ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer(yyin,YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ | } | | #define yy_set_bol(at_bol) \ | { \ | if ( ! YY_CURRENT_BUFFER ){\ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer(yyin,YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ | } | | #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) | | /* Begin user sect3 */ | | typedef unsigned char YY_CHAR; | | FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0; | | typedef int yy_state_type; | | extern int yylineno; | | int yylineno = 1; | | extern char *yytext; | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state (void ); | static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); | static int yy_get_next_buffer (void ); | static void yy_fatal_error (yyconst char msg[] ); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | (yytext_ptr) = yy_bp; \ | (yytext_ptr) -= (yy_more_len); \ | yyleng = (size_t) (yy_cp - (yytext_ptr)); \ | (yy_hold_char) = *yy_cp; \ | *yy_cp = '\0'; \ | (yy_c_buf_p) = yy_cp; | | #define YY_NUM_RULES 8 | #define YY_END_OF_BUFFER 9 | /* This struct is not used in this scanner, | but its presence is necessary. */ | struct yy_trans_info | { | flex_int32_t yy_verify; | flex_int32_t yy_nxt; | }; | static yyconst flex_int16_t yy_acclist[23] = | { 0, | 9, 7, 8, 8, 1, 7, 8, 2, 7, 8, | 3, 7, 8, 4, 7, 8, 5, 7, 8, 6, | 7, 8 | } ; | | static yyconst flex_int16_t yy_accept[14] = | { 0, | 1, 1, 1, 2, 4, 5, 8, 11, 14, 17, | 20, 23, 23 | } ; | | static yyconst flex_int32_t yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 3, 4, 5, 6, | | 7, 8, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static yyconst flex_int32_t yy_meta[9] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1 | } ; | | static yyconst flex_int16_t yy_base[13] = | { 0, | 0, 0, 9, 10, 10, 10, 10, 10, 10, 10, | 10, 10 | } ; | | static yyconst flex_int16_t yy_def[13] = | { 0, | 12, 1, 12, 12, 12, 12, 12, 12, 12, 12, | 12, 0 | } ; | | static yyconst flex_int16_t yy_nxt[19] = | { 0, | 4, 5, 6, 7, 8, 9, 10, 11, 12, 3, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static yyconst flex_int16_t yy_chk[19] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 3, 12, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | extern int yy_flex_debug; | int yy_flex_debug = 0; | | static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; | static char *yy_full_match; | static int yy_lp; | #define REJECT \ | { \ | *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ | yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ | ++(yy_lp); \ | goto find_rule; \ | } | | static int yy_more_flag = 0; | static int yy_more_len = 0; | #define yymore() ((yy_more_flag) = 1) | #define YY_MORE_ADJ (yy_more_len) | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #line 477 "lex.yy.c" | | #define INITIAL 0 | | #ifndef YY_NO_UNISTD_H | /* Special case for "unistd.h", since it is non-ANSI. We include it way | * down here because we want the user's section 1 to have been scanned first. | * The user has a chance to override it with an option. | */ | #include | #endif | | #ifndef YY_EXTRA_TYPE | #define YY_EXTRA_TYPE void * | #endif | | static int yy_init_globals (void ); | | /* Accessor methods to globals. | These are made visible to non-reentrant scanners for convenience. */ | | int yylex_destroy (void ); | | int yyget_debug (void ); | | void yyset_debug (int debug_flag ); | | YY_EXTRA_TYPE yyget_extra (void ); | | void yyset_extra (YY_EXTRA_TYPE user_defined ); | | FILE *yyget_in (void ); | | void yyset_in (FILE * in_str ); | | FILE *yyget_out (void ); | | void yyset_out (FILE * out_str ); | | int yyget_leng (void ); | | char *yyget_text (void ); | | int yyget_lineno (void ); | | void yyset_lineno (int line_number ); | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap (void ); | #else | extern int yywrap (void ); | #endif | #endif | | static void yyunput (int c,char *buf_ptr ); | | #ifndef yytext_ptr | static void yy_flex_strncpy (char *,yyconst char *,int ); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (yyconst char * ); | #endif | | #ifndef YY_NO_INPUT | | #ifdef __cplusplus | static int yyinput (void ); | #else | static int input (void ); | #endif | | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k */ | #define YY_READ_BUF_SIZE 16384 | #else | #define YY_READ_BUF_SIZE 8192 | #endif /* __ia64__ */ | #endif | | /* Copy whatever the last rule matched to the standard output. */ | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO do { if (fwrite( yytext, yyleng, 1, yyout )) {} } while (0) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ | { \ | int c = '*'; \ | size_t n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else \ | { \ | errno=0; \ | while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \ | { \ | if( errno != EINTR) \ | { \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | break; \ | } \ | errno=0; \ | clearerr(yyin); \ | } \ | }\ | \ | | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* end tables serialization structures and prototypes */ | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL_IS_OURS 1 | | extern int yylex (void); | | #define YY_DECL int yylex (void) | #endif /* !YY_DECL */ | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | /** The main scanner function which does all the work. | */ | YY_DECL | { | register yy_state_type yy_current_state; | register char *yy_cp, *yy_bp; | register int yy_act; | | #line 1 "conftest.l" | | #line 666 "lex.yy.c" | | if ( !(yy_init) ) | { | (yy_init) = 1; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | /* Create the reject buffer large enough to save one state per allowed character. */ | if ( ! (yy_state_buf) ) | (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); | if ( ! (yy_state_buf) ) | YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); | | if ( ! (yy_start) ) | (yy_start) = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! YY_CURRENT_BUFFER ) { | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer(yyin,YY_BUF_SIZE ); | } | | yy_load_buffer_state( ); | } | | while ( 1 ) /* loops until end-of-file is reached */ | { | (yy_more_len) = 0; | if ( (yy_more_flag) ) | { | (yy_more_len) = (yy_c_buf_p) - (yytext_ptr); | (yy_more_flag) = 0; | } | yy_cp = (yy_c_buf_p); | | /* Support of yytext. */ | *yy_cp = (yy_hold_char); | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | yy_match: | do | { | register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | *(yy_state_ptr)++ = yy_current_state; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 10 ); | | yy_find_action: | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | find_rule: /* we branch to this label when backing up */ | for ( ; ; ) /* until we find what rule we matched */ | { | if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) | { | yy_act = yy_acclist[(yy_lp)]; | { | (yy_full_match) = yy_cp; | break; | } | } | --yy_cp; | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | do_action: /* This label is used only to access EOF actions. */ | | switch ( yy_act ) | { /* beginning of action switch */ | case 1: | YY_RULE_SETUP | #line 2 "conftest.l" | { ECHO; } | YY_BREAK | case 2: | YY_RULE_SETUP | #line 3 "conftest.l" | { REJECT; } | YY_BREAK | case 3: | YY_RULE_SETUP | #line 4 "conftest.l" | { yymore (); } | YY_BREAK | case 4: | YY_RULE_SETUP | #line 5 "conftest.l" | { yyless (1); } | YY_BREAK | case 5: | YY_RULE_SETUP | #line 6 "conftest.l" | { yyless (input () != 0); } | YY_BREAK | case 6: | YY_RULE_SETUP | #line 7 "conftest.l" | { unput (yytext[0]); } | YY_BREAK | case 7: | YY_RULE_SETUP | #line 8 "conftest.l" | { BEGIN INITIAL; } | YY_BREAK | case 8: | YY_RULE_SETUP | #line 9 "conftest.l" | ECHO; | YY_BREAK | #line 804 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = (yy_hold_char); | YY_RESTORE_YY_MORE_OFFSET | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between YY_CURRENT_BUFFER and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++(yy_c_buf_p); | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = (yy_c_buf_p); | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_END_OF_FILE: | { | (yy_did_buffer_switch_on_eof) = 0; | | if ( yywrap( ) ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = | (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | (yy_c_buf_p) = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of yylex */ | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | static int yy_get_next_buffer (void) | { | register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; | register char *source = (yytext_ptr); | register int number_to_move, i; | int ret_val; | | if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1; | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; | | else | { | int num_to_read = | YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | | YY_FATAL_ERROR( | "input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); | | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), | (yy_n_chars), (size_t) num_to_read ); | | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | if ( (yy_n_chars) == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart(yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { | /* Extend the array by 50%, plus the number we really need. */ | yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); | if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); | } | | (yy_n_chars) += number_to_move; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; | | (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; | | return ret_val; | } | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state (void) | { | register yy_state_type yy_current_state; | register char *yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) | { | register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | *(yy_state_ptr)++ = yy_current_state; | } | | return yy_current_state; | } | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) | { | register int yy_is_jam; | | register YY_CHAR yy_c = 1; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | yy_is_jam = (yy_current_state == 12); | if ( ! yy_is_jam ) | *(yy_state_ptr)++ = yy_current_state; | | return yy_is_jam ? 0 : yy_current_state; | } | | static void yyunput (int c, register char * yy_bp ) | { | register char *yy_cp; | | yy_cp = (yy_c_buf_p); | | /* undo effects of setting up yytext */ | *yy_cp = (yy_hold_char); | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | register int number_to_move = (yy_n_chars) + 2; | register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; | register char *source = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; | | while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size; | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | (yytext_ptr) = yy_bp; | (yy_hold_char) = *yy_cp; | (yy_c_buf_p) = yy_cp; | } | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput (void) | #else | static int input (void) | #endif | | { | int c; | | *(yy_c_buf_p) = (yy_hold_char); | | if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | /* This was really a NUL. */ | *(yy_c_buf_p) = '\0'; | | else | { /* need more input */ | int offset = (yy_c_buf_p) - (yytext_ptr); | ++(yy_c_buf_p); | | switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart(yyin ); | | /*FALLTHROUGH*/ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap( ) ) | return EOF; | | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = (yytext_ptr) + offset; | break; | } | } | } | | c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ | *(yy_c_buf_p) = '\0'; /* preserve yytext */ | (yy_hold_char) = *++(yy_c_buf_p); | | return c; | } | #endif /* ifndef YY_NO_INPUT */ | | /** Immediately switch to a different input stream. | * @param input_file A readable stream. | * | * @note This function does not reset the start condition to @c INITIAL . | */ | void yyrestart (FILE * input_file ) | { | | if ( ! YY_CURRENT_BUFFER ){ | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer(yyin,YY_BUF_SIZE ); | } | | yy_init_buffer(YY_CURRENT_BUFFER,input_file ); | yy_load_buffer_state( ); | } | | /** Switch to a different input buffer. | * @param new_buffer The new input buffer. | * | */ | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) | { | | /* TODO. We should be able to replace this entire function body | * with | * yypop_buffer_state(); | * yypush_buffer_state(new_buffer); | */ | yyensure_buffer_stack (); | if ( YY_CURRENT_BUFFER == new_buffer ) | return; | | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | YY_CURRENT_BUFFER_LVALUE = new_buffer; | yy_load_buffer_state( ); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | (yy_did_buffer_switch_on_eof) = 1; | } | | static void yy_load_buffer_state (void) | { | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; | yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; | (yy_hold_char) = *(yy_c_buf_p); | } | | /** Allocate and initialize an input buffer state. | * @param file A readable stream. | * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. | * | * @return the allocated buffer state. | */ | YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer(b,file ); | | return b; | } | | /** Destroy the buffer. | * @param b a buffer created with yy_create_buffer() | * | */ | void yy_delete_buffer (YY_BUFFER_STATE b ) | { | | if ( ! b ) | return; | | if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ | YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yyfree((void *) b->yy_ch_buf ); | | yyfree((void *) b ); | } | | #ifndef __cplusplus | extern int isatty (int ); | #endif /* __cplusplus */ | | /* Initializes or reinitializes a buffer. | * This function is sometimes called more than once on the same buffer, | * such as during a yyrestart() or at EOF. | */ | static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) | | { | int oerrno = errno; | | yy_flush_buffer(b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | /* If b is the current buffer, then yy_init_buffer was _probably_ | * called from yyrestart() or through yy_get_next_buffer. | * In that case, we don't want to reset the lineno or column. | */ | if (b != YY_CURRENT_BUFFER){ | b->yy_bs_lineno = 1; | b->yy_bs_column = 0; | } | | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | | errno = oerrno; | } | | /** Discard all buffered characters. On the next scan, YY_INPUT will be called. | * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. | * | */ | void yy_flush_buffer (YY_BUFFER_STATE b ) | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == YY_CURRENT_BUFFER ) | yy_load_buffer_state( ); | } | | /** Pushes the new state onto the stack. The new state becomes | * the current state. This function will allocate the stack | * if necessary. | * @param new_buffer The new state. | * | */ | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) | { | if (new_buffer == NULL) | return; | | yyensure_buffer_stack(); | | /* This block is copied from yy_switch_to_buffer. */ | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | /* Only push if top exists. Otherwise, replace top. */ | if (YY_CURRENT_BUFFER) | (yy_buffer_stack_top)++; | YY_CURRENT_BUFFER_LVALUE = new_buffer; | | /* copied from yy_switch_to_buffer. */ | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | | /** Removes and deletes the top of the stack, if present. | * The next element becomes the new top. | * | */ | void yypop_buffer_state (void) | { | if (!YY_CURRENT_BUFFER) | return; | | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | if ((yy_buffer_stack_top) > 0) | --(yy_buffer_stack_top); | | if (YY_CURRENT_BUFFER) { | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | } | | /* Allocates the stack if it does not exist. | * Guarantees space for at least one push. | */ | static void yyensure_buffer_stack (void) | { | int num_to_alloc; | | if (!(yy_buffer_stack)) { | | /* First allocation is just for 2 elements, since we don't know if this | * scanner will even need a stack. We use 2 instead of 1 to avoid an | * immediate realloc on the next call. | */ | num_to_alloc = 1; | (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc | (num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); | | (yy_buffer_stack_max) = num_to_alloc; | (yy_buffer_stack_top) = 0; | return; | } | | if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ | | /* Increase the buffer to prepare for a possible push. */ | int grow_size = 8 /* arbitrary grow size */; | | num_to_alloc = (yy_buffer_stack_max) + grow_size; | (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc | ((yy_buffer_stack), | num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | /* zero only the new slots.*/ | memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); | (yy_buffer_stack_max) = num_to_alloc; | } | } | | /** Setup the input buffer state to scan directly from a user-specified character buffer. | * @param base the character buffer | * @param size the size in bytes of the character buffer | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return 0; | | b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = 0; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer(b ); | | return b; | } | | /** Setup the input buffer state to scan a string. The next call to yylex() will | * scan from a @e copy of @a str. | * @param yystr a NUL-terminated string to scan | * | * @return the newly allocated buffer state object. | * @note If you want to scan bytes that may contain NUL values, then use | * yy_scan_bytes() instead. | */ | YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) | { | | return yy_scan_bytes(yystr,strlen(yystr) ); | } | | /** Setup the input buffer state to scan the given bytes. The next call to yylex() will | * scan from a @e copy of @a bytes. | * @param yybytes the byte buffer to scan | * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len ) | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | int i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = _yybytes_len + 2; | buf = (char *) yyalloc(n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < _yybytes_len; ++i ) | buf[i] = yybytes[i]; | | buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer(buf,n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | static void yy_fatal_error (yyconst char* msg ) | { | (void) fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | yytext[yyleng] = (yy_hold_char); \ | (yy_c_buf_p) = yytext + yyless_macro_arg; \ | (yy_hold_char) = *(yy_c_buf_p); \ | *(yy_c_buf_p) = '\0'; \ | yyleng = yyless_macro_arg; \ | } \ | while ( 0 ) | | /* Accessor methods (get/set functions) to struct members. */ | | /** Get the current line number. | * | */ | int yyget_lineno (void) | { | | return yylineno; | } | | /** Get the input stream. | * | */ | FILE *yyget_in (void) | { | return yyin; | } | | /** Get the output stream. | * | */ | FILE *yyget_out (void) | { | return yyout; | } | | /** Get the length of the current token. | * | */ | int yyget_leng (void) | { | return yyleng; | } | | /** Get the current token. | * | */ | | char *yyget_text (void) | { | return yytext; | } | | /** Set the current line number. | * @param line_number | * | */ | void yyset_lineno (int line_number ) | { | | yylineno = line_number; | } | | /** Set the input stream. This does not discard the current | * input buffer. | * @param in_str A readable stream. | * | * @see yy_switch_to_buffer | */ | void yyset_in (FILE * in_str ) | { | yyin = in_str ; | } | | void yyset_out (FILE * out_str ) | { | yyout = out_str ; | } | | int yyget_debug (void) | { | return yy_flex_debug; | } | | void yyset_debug (int bdebug ) | { | yy_flex_debug = bdebug ; | } | | static int yy_init_globals (void) | { | /* Initialization is the same as for the non-reentrant scanner. | * This function is called from yylex_destroy(), so don't allocate here. | */ | | (yy_buffer_stack) = 0; | (yy_buffer_stack_top) = 0; | (yy_buffer_stack_max) = 0; | (yy_c_buf_p) = (char *) 0; | (yy_init) = 0; | (yy_start) = 0; | | (yy_state_buf) = 0; | (yy_state_ptr) = 0; | (yy_full_match) = 0; | (yy_lp) = 0; | | /* Defined in main.c */ | #ifdef YY_STDINIT | yyin = stdin; | yyout = stdout; | #else | yyin = (FILE *) 0; | yyout = (FILE *) 0; | #endif | | /* For future reference: Set errno on error, since we are called by | * yylex_init() | */ | return 0; | } | | /* yylex_destroy is for both reentrant and non-reentrant scanners. */ | int yylex_destroy (void) | { | | /* Pop the buffer stack, destroying each element. */ | while(YY_CURRENT_BUFFER){ | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | yypop_buffer_state(); | } | | /* Destroy the stack itself. */ | yyfree((yy_buffer_stack) ); | (yy_buffer_stack) = NULL; | | yyfree ( (yy_state_buf) ); | (yy_state_buf) = NULL; | | /* Reset the globals. This is important in a non-reentrant scanner so the next time | * yylex() is called, initialization will occur. */ | yy_init_globals( ); | | return 0; | } | | /* | * Internal utility routines. | */ | | #ifndef yytext_ptr | static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) | { | register int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (yyconst char * s ) | { | register int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | void *yyalloc (yy_size_t size ) | { | return (void *) malloc( size ); | } | | void *yyrealloc (void * ptr, yy_size_t size ) | { | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return (void *) realloc( (char *) ptr, size ); | } | | void yyfree (void * ptr ) | { | free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ | } | | #define YYTABLES_NAME "yytables" | | #line 9 "conftest.l" | | | #ifdef YYTEXT_POINTER | extern char *yytext; | #endif | int | main (void) | { | return ! yylex () + ! yywrap (); | } configure:4709: gcc -std=gnu99 -o conftest conftest.c -lfl >&5 configure:4715: $? = 0 configure:4736: result: -lfl configure:4742: checking whether yytext is a pointer configure:4763: gcc -std=gnu99 -o conftest conftest.c -lfl >&5 configure:4769: $? = 0 configure:4788: result: yes configure:4822: checking for flex >= 2.5.33 configure:4842: result: found 2.5.35, ok configure:4855: checking for flex != 2.5.34 configure:4864: result: not found, good configure:4884: checking whether perl executable path has been provided configure:4916: result: no configure:4926: checking for perl configure:4944: found /usr/bin/perl configure:4956: result: /usr/bin/perl configure:4976: checking for a sed that does not truncate output configure:5055: result: /bin/sed configure:5060: checking for grep that handles long lines and -e configure:5134: result: /bin/grep configure:5147: checking for perl version configure:5152: result: 5.10.0 configure:5163: checking for gawk configure:5190: result: mawk configure:5271: checking for strlcpy configure:5327: gcc -std=gnu99 -o conftest conftest.c >&5 /tmp/cculE8Fu.o: In function `main': conftest.c:(.text+0xa): undefined reference to `strlcpy' collect2: ld returned 1 exit status configure:5333: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "Warzone 2100" | #define PACKAGE_TARNAME "warzone2100" | #define PACKAGE_VERSION "2.2.0" | #define PACKAGE_STRING "Warzone 2100 2.2.0" | #define PACKAGE_BUGREPORT "http://wz2100.net/" | #define PACKAGE "warzone2100" | #define VERSION "2.2.0" | #define YYTEXT_POINTER 1 | #define _GNU_SOURCE 1 | /* end confdefs.h. */ | /* Define strlcpy to an innocuous variant, in case declares strlcpy. | For example, HP-UX 11i declares gettimeofday. */ | #define strlcpy innocuous_strlcpy | | /* System header to define __stub macros and hopefully few prototypes, | which can conflict with char strlcpy (); below. | Prefer to if __STDC__ is defined, since | exists even on freestanding compilers. */ | | #ifdef __STDC__ | # include | #else | # include | #endif | | #undef strlcpy | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char strlcpy (); | /* The GNU C library defines this for functions which it implements | to always fail with ENOSYS. Some functions are actually named | something starting with __ and the normal name is an alias. */ | #if defined __stub_strlcpy || defined __stub___strlcpy | choke me | #endif | | int | main () | { | return strlcpy (); | ; | return 0; | } configure:5350: result: no configure:5463: checking for strlcat configure:5519: gcc -std=gnu99 -o conftest conftest.c >&5 /tmp/ccAzceLA.o: In function `main': conftest.c:(.text+0xa): undefined reference to `strlcat' collect2: ld returned 1 exit status configure:5525: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "Warzone 2100" | #define PACKAGE_TARNAME "warzone2100" | #define PACKAGE_VERSION "2.2.0" | #define PACKAGE_STRING "Warzone 2100 2.2.0" | #define PACKAGE_BUGREPORT "http://wz2100.net/" | #define PACKAGE "warzone2100" | #define VERSION "2.2.0" | #define YYTEXT_POINTER 1 | #define _GNU_SOURCE 1 | /* end confdefs.h. */ | /* Define strlcat to an innocuous variant, in case declares strlcat. | For example, HP-UX 11i declares gettimeofday. */ | #define strlcat innocuous_strlcat | | /* System header to define __stub macros and hopefully few prototypes, | which can conflict with char strlcat (); below. | Prefer to if __STDC__ is defined, since | exists even on freestanding compilers. */ | | #ifdef __STDC__ | # include | #else | # include | #endif | | #undef strlcat | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char strlcat (); | /* The GNU C library defines this for functions which it implements | to always fail with ENOSYS. Some functions are actually named | something starting with __ and the normal name is an alias. */ | #if defined __stub_strlcat || defined __stub___strlcat | choke me | #endif | | int | main () | { | return strlcat (); | ; | return 0; | } configure:5542: result: no configure:5670: checking whether NLS is requested configure:5679: result: yes configure:5720: checking for msgfmt configure: trying /usr/bin/msgfmt... 0 translated messages. configure:5752: result: /usr/bin/msgfmt configure:5761: checking for gmsgfmt configure:5792: result: /usr/bin/msgfmt configure:5843: checking for xgettext configure: trying /usr/bin/xgettext... /usr/bin/xgettext: warning: file `/dev/null' extension `' is unknown; will try C configure:5875: result: /usr/bin/xgettext configure:5921: checking for msgmerge configure: trying /usr/bin/msgmerge... configure:5952: result: /usr/bin/msgmerge configure:6009: checking for ld used by GCC configure:6073: result: /usr/bin/ld configure:6082: checking if the linker (/usr/bin/ld) is GNU ld configure:6095: result: yes configure:6102: checking for shared library run path origin configure:6115: result: done configure:6616: checking for CFPreferencesCopyAppValue configure:6644: gcc -std=gnu99 -o conftest conftest.c -Wl,-framework -Wl,CoreFoundation >&5 conftest.c:12:42: error: CoreFoundation/CFPreferences.h: No such file or directory conftest.c: In function 'main': conftest.c:16: warning: implicit declaration of function 'CFPreferencesCopyAppValue' conftest.c:16: error: 'NULL' undeclared (first use in this function) conftest.c:16: error: (Each undeclared identifier is reported only once conftest.c:16: error: for each function it appears in.) configure:6650: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "Warzone 2100" | #define PACKAGE_TARNAME "warzone2100" | #define PACKAGE_VERSION "2.2.0" | #define PACKAGE_STRING "Warzone 2100 2.2.0" | #define PACKAGE_BUGREPORT "http://wz2100.net/" | #define PACKAGE "warzone2100" | #define VERSION "2.2.0" | #define YYTEXT_POINTER 1 | #define _GNU_SOURCE 1 | /* end confdefs.h. */ | #include | int | main () | { | CFPreferencesCopyAppValue(NULL, NULL) | ; | return 0; | } configure:6668: result: no configure:6677: checking for CFLocaleCopyCurrent configure:6705: gcc -std=gnu99 -o conftest conftest.c -Wl,-framework -Wl,CoreFoundation >&5 conftest.c:12:37: error: CoreFoundation/CFLocale.h: No such file or directory conftest.c: In function 'main': conftest.c:16: warning: implicit declaration of function 'CFLocaleCopyCurrent' configure:6711: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "Warzone 2100" | #define PACKAGE_TARNAME "warzone2100" | #define PACKAGE_VERSION "2.2.0" | #define PACKAGE_STRING "Warzone 2100 2.2.0" | #define PACKAGE_BUGREPORT "http://wz2100.net/" | #define PACKAGE "warzone2100" | #define VERSION "2.2.0" | #define YYTEXT_POINTER 1 | #define _GNU_SOURCE 1 | /* end confdefs.h. */ | #include | int | main () | { | CFLocaleCopyCurrent(); | ; | return 0; | } configure:6729: result: no configure:6780: checking for GNU gettext in libc configure:6810: gcc -std=gnu99 -o conftest conftest.c >&5 configure:6816: $? = 0 configure:6834: result: yes configure:7718: checking whether to use NLS configure:7720: result: yes configure:7723: checking where the gettext function comes from configure:7734: result: libc configure:7812: checking for msgfmt >= 0.15 configure:7832: result: found 0.17, ok configure:7812: checking for xgettext >= 0.15 configure:7832: result: found 0.17, ok configure:7890: checking for pkg-config configure:7908: found /usr/bin/pkg-config configure:7920: result: /usr/bin/pkg-config configure:7949: checking pkg-config is at least version 0.9.0 configure:7952: result: yes configure:7978: checking for pkg-config >= 0.9 configure:7998: result: found 0.22, ok configure:8242: checking whether to build NSIS installer configure:8244: result: no configure:8290: checking whether to compile in debug mode configure:8292: result: yes configure:8511: checking for SDL configure:8519: $PKG_CONFIG --exists --print-errors "sdl >= 1.2" configure:8522: $? = 0 configure:8537: $PKG_CONFIG --exists --print-errors "sdl >= 1.2" configure:8540: $? = 0 configure:8616: result: yes configure:8622: checking for PNG configure:8630: $PKG_CONFIG --exists --print-errors "libpng >= 1.2" configure:8633: $? = 0 configure:8648: $PKG_CONFIG --exists --print-errors "libpng >= 1.2" configure:8651: $? = 0 configure:8727: result: yes configure:8733: checking for THEORA configure:8741: $PKG_CONFIG --exists --print-errors "theora >= 0.1" configure:8744: $? = 0 configure:8759: $PKG_CONFIG --exists --print-errors "theora >= 0.1" configure:8762: $? = 0 configure:8838: result: yes configure:8847: checking for OPENAL configure:8855: $PKG_CONFIG --exists --print-errors "openal >= 0.0.8" configure:8858: $? = 0 configure:8873: $PKG_CONFIG --exists --print-errors "openal >= 0.0.8" configure:8876: $? = 0 configure:8952: result: yes configure:8958: checking for OGGVORBIS configure:8966: $PKG_CONFIG --exists --print-errors "vorbisfile >= 1.1" configure:8969: $? = 0 configure:8984: $PKG_CONFIG --exists --print-errors "vorbisfile >= 1.1" configure:8987: $? = 0 configure:9063: result: yes configure:9074: checking for SQLITE configure:9082: $PKG_CONFIG --exists --print-errors "sqlite3 >= 3.6.10" Requested 'sqlite3 >= 3.6.10' but version of SQLite is 3.5.9 configure:9085: $? = 1 configure:9100: $PKG_CONFIG --exists --print-errors "sqlite3 >= 3.6.10" Requested 'sqlite3 >= 3.6.10' but version of SQLite is 3.5.9 configure:9103: $? = 1 Requested 'sqlite3 >= 3.6.10' but version of SQLite is 3.5.9 configure:9131: result: no configure:9399: checking how to run the C preprocessor configure:9439: gcc -std=gnu99 -E conftest.c configure:9445: $? = 0 configure:9476: gcc -std=gnu99 -E conftest.c conftest.c:17:28: error: ac_nonexistent.h: No such file or directory configure:9482: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "Warzone 2100" | #define PACKAGE_TARNAME "warzone2100" | #define PACKAGE_VERSION "2.2.0" | #define PACKAGE_STRING "Warzone 2100 2.2.0" | #define PACKAGE_BUGREPORT "http://wz2100.net/" | #define PACKAGE "warzone2100" | #define VERSION "2.2.0" | #define YYTEXT_POINTER 1 | #define _GNU_SOURCE 1 | #define ENABLE_NLS 1 | #define HAVE_GETTEXT 1 | #define HAVE_DCGETTEXT 1 | #define _XOPEN_SOURCE 600 | #define PACKAGE_DISTRIBUTOR "UNKNOWN" | /* end confdefs.h. */ | #include configure:9515: result: gcc -std=gnu99 -E configure:9544: gcc -std=gnu99 -E conftest.c configure:9550: $? = 0 configure:9581: gcc -std=gnu99 -E conftest.c conftest.c:17:28: error: ac_nonexistent.h: No such file or directory configure:9587: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "Warzone 2100" | #define PACKAGE_TARNAME "warzone2100" | #define PACKAGE_VERSION "2.2.0" | #define PACKAGE_STRING "Warzone 2100 2.2.0" | #define PACKAGE_BUGREPORT "http://wz2100.net/" | #define PACKAGE "warzone2100" | #define VERSION "2.2.0" | #define YYTEXT_POINTER 1 | #define _GNU_SOURCE 1 | #define ENABLE_NLS 1 | #define HAVE_GETTEXT 1 | #define HAVE_DCGETTEXT 1 | #define _XOPEN_SOURCE 600 | #define PACKAGE_DISTRIBUTOR "UNKNOWN" | /* end confdefs.h. */ | #include configure:9625: checking for egrep configure:9703: result: /bin/grep -E configure:9708: checking for ANSI C header files configure:9738: gcc -std=gnu99 -c conftest.c >&5 configure:9744: $? = 0 configure:9843: gcc -std=gnu99 -o conftest -rdynamic conftest.c >&5 configure:9846: $? = 0 configure:9852: ./conftest configure:9855: $? = 0 configure:9872: result: yes configure:9896: checking for sys/types.h configure:9917: gcc -std=gnu99 -c conftest.c >&5 configure:9923: $? = 0 configure:9939: result: yes configure:9896: checking for sys/stat.h configure:9917: gcc -std=gnu99 -c conftest.c >&5 configure:9923: $? = 0 configure:9939: result: yes configure:9896: checking for stdlib.h configure:9917: gcc -std=gnu99 -c conftest.c >&5 configure:9923: $? = 0 configure:9939: result: yes configure:9896: checking for string.h configure:9917: gcc -std=gnu99 -c conftest.c >&5 configure:9923: $? = 0 configure:9939: result: yes configure:9896: checking for memory.h configure:9917: gcc -std=gnu99 -c conftest.c >&5 configure:9923: $? = 0 configure:9939: result: yes configure:9896: checking for strings.h configure:9917: gcc -std=gnu99 -c conftest.c >&5 configure:9923: $? = 0 configure:9939: result: yes configure:9896: checking for inttypes.h configure:9917: gcc -std=gnu99 -c conftest.c >&5 configure:9923: $? = 0 configure:9939: result: yes configure:9896: checking for stdint.h configure:9917: gcc -std=gnu99 -c conftest.c >&5 configure:9923: $? = 0 configure:9939: result: yes configure:9896: checking for unistd.h configure:9917: gcc -std=gnu99 -c conftest.c >&5 configure:9923: $? = 0 configure:9939: result: yes configure:9961: checking popt.h usability configure:9978: gcc -std=gnu99 -c conftest.c >&5 configure:9984: $? = 0 configure:9998: result: yes configure:10002: checking popt.h presence configure:10017: gcc -std=gnu99 -E conftest.c configure:10023: $? = 0 configure:10037: result: yes configure:10070: checking for popt.h configure:10077: result: yes configure:10090: checking for poptGetContext in -lpopt configure:10125: gcc -std=gnu99 -o conftest -rdynamic conftest.c -lpopt >&5 configure:10131: $? = 0 configure:10149: result: yes configure:10172: checking physfs.h usability configure:10189: gcc -std=gnu99 -c conftest.c >&5 configure:10195: $? = 0 configure:10209: result: yes configure:10213: checking physfs.h presence configure:10228: gcc -std=gnu99 -E conftest.c configure:10234: $? = 0 configure:10248: result: yes configure:10281: checking for physfs.h configure:10288: result: yes configure:10301: checking for PHYSFS_init in -lphysfs configure:10336: gcc -std=gnu99 -o conftest -rdynamic conftest.c -lphysfs >&5 configure:10342: $? = 0 configure:10360: result: yes configure:10383: checking SDL/SDL_net.h usability configure:10400: gcc -std=gnu99 -c conftest.c >&5 configure:10406: $? = 0 configure:10420: result: yes configure:10424: checking SDL/SDL_net.h presence configure:10439: gcc -std=gnu99 -E conftest.c configure:10445: $? = 0 configure:10459: result: yes configure:10492: checking for SDL/SDL_net.h configure:10499: result: yes configure:10512: checking for SDLNet_Init in -lSDL_net configure:10547: gcc -std=gnu99 -o conftest -rdynamic conftest.c -lSDL_net -lSDL >&5 configure:10553: $? = 0 configure:10571: result: yes configure:10594: checking SDL/SDL_opengl.h usability configure:10611: gcc -std=gnu99 -c conftest.c >&5 configure:10617: $? = 0 configure:10631: result: yes configure:10635: checking SDL/SDL_opengl.h presence configure:10650: gcc -std=gnu99 -E conftest.c configure:10656: $? = 0 configure:10670: result: yes configure:10703: checking for SDL/SDL_opengl.h configure:10710: result: yes configure:10723: checking for main in -lGL configure:10752: gcc -std=gnu99 -o conftest -rdynamic conftest.c -lGL >&5 /usr/bin/ld: cannot find -lGL collect2: ld returned 1 exit status configure:10758: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "Warzone 2100" | #define PACKAGE_TARNAME "warzone2100" | #define PACKAGE_VERSION "2.2.0" | #define PACKAGE_STRING "Warzone 2100 2.2.0" | #define PACKAGE_BUGREPORT "http://wz2100.net/" | #define PACKAGE "warzone2100" | #define VERSION "2.2.0" | #define YYTEXT_POINTER 1 | #define _GNU_SOURCE 1 | #define ENABLE_NLS 1 | #define HAVE_GETTEXT 1 | #define HAVE_DCGETTEXT 1 | #define _XOPEN_SOURCE 600 | #define PACKAGE_DISTRIBUTOR "UNKNOWN" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | /* end confdefs.h. */ | | | int | main () | { | return main (); | ; | return 0; | } configure:10776: result: no configure:10781: checking for main in -lopengl32 configure:10810: gcc -std=gnu99 -o conftest -rdynamic conftest.c -lopengl32 >&5 /usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-linux-gnu/4.3.2/../../../../lib/libopengl32.so when searching for -lopengl32 /usr/bin/ld: skipping incompatible /usr/lib/../lib/libopengl32.so when searching for -lopengl32 /usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-linux-gnu/4.3.2/../../../libopengl32.so when searching for -lopengl32 /usr/bin/ld: skipping incompatible /usr/bin/../lib/libopengl32.so when searching for -lopengl32 /usr/bin/ld: skipping incompatible /usr/lib64/libopengl32.so when searching for -lopengl32 /usr/bin/ld: skipping incompatible /usr/lib/libopengl32.so when searching for -lopengl32 /usr/bin/ld: cannot find -lopengl32 collect2: ld returned 1 exit status configure:10816: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "Warzone 2100" | #define PACKAGE_TARNAME "warzone2100" | #define PACKAGE_VERSION "2.2.0" | #define PACKAGE_STRING "Warzone 2100 2.2.0" | #define PACKAGE_BUGREPORT "http://wz2100.net/" | #define PACKAGE "warzone2100" | #define VERSION "2.2.0" | #define YYTEXT_POINTER 1 | #define _GNU_SOURCE 1 | #define ENABLE_NLS 1 | #define HAVE_GETTEXT 1 | #define HAVE_DCGETTEXT 1 | #define _XOPEN_SOURCE 600 | #define PACKAGE_DISTRIBUTOR "UNKNOWN" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | /* end confdefs.h. */ | | | int | main () | { | return main (); | ; | return 0; | } configure:10834: result: no configure:10839: error: OpenGL library not found. ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_build=x86_64-unknown-linux-gnu ac_cv_c_compiler_gnu=yes ac_cv_cxx_compiler_gnu=yes ac_cv_env_CCC_set= ac_cv_env_CCC_value= ac_cv_env_CC_FOR_BUILD_set= ac_cv_env_CC_FOR_BUILD_value= ac_cv_env_CC_set= ac_cv_env_CC_value= ac_cv_env_CFLAGS_set= ac_cv_env_CFLAGS_value= ac_cv_env_CPPFLAGS_FOR_BUILD_set= ac_cv_env_CPPFLAGS_FOR_BUILD_value= ac_cv_env_CPPFLAGS_set= ac_cv_env_CPPFLAGS_value= ac_cv_env_CPP_set= ac_cv_env_CPP_value= ac_cv_env_CXXFLAGS_set= ac_cv_env_CXXFLAGS_value= ac_cv_env_CXX_FOR_BUILD_set= ac_cv_env_CXX_FOR_BUILD_value= ac_cv_env_CXX_set= ac_cv_env_CXX_value= ac_cv_env_FONTCONFIG_CFLAGS_set= ac_cv_env_FONTCONFIG_CFLAGS_value= ac_cv_env_FONTCONFIG_LIBS_set= ac_cv_env_FONTCONFIG_LIBS_value= ac_cv_env_FREETYPE_CFLAGS_set= ac_cv_env_FREETYPE_CFLAGS_value= ac_cv_env_FREETYPE_LIBS_set= ac_cv_env_FREETYPE_LIBS_value= ac_cv_env_LDFLAGS_set= ac_cv_env_LDFLAGS_value= ac_cv_env_LIBS_set= ac_cv_env_LIBS_value= ac_cv_env_OGGVORBIS_CFLAGS_set= ac_cv_env_OGGVORBIS_CFLAGS_value= ac_cv_env_OGGVORBIS_LIBS_set= ac_cv_env_OGGVORBIS_LIBS_value= ac_cv_env_OPENAL_CFLAGS_set= ac_cv_env_OPENAL_CFLAGS_value= ac_cv_env_OPENAL_LIBS_set= ac_cv_env_OPENAL_LIBS_value= ac_cv_env_PERL_set= ac_cv_env_PERL_value= ac_cv_env_PKGCONFIG_PREFIX_set= ac_cv_env_PKGCONFIG_PREFIX_value= ac_cv_env_PKG_CONFIG_set= ac_cv_env_PKG_CONFIG_value= ac_cv_env_PNG_CFLAGS_set= ac_cv_env_PNG_CFLAGS_value= ac_cv_env_PNG_LIBS_set= ac_cv_env_PNG_LIBS_value= ac_cv_env_SDL_CFLAGS_set= ac_cv_env_SDL_CFLAGS_value= ac_cv_env_SDL_LIBS_set= ac_cv_env_SDL_LIBS_value= ac_cv_env_SQLITE_CFLAGS_set= ac_cv_env_SQLITE_CFLAGS_value= ac_cv_env_SQLITE_LIBS_set= ac_cv_env_SQLITE_LIBS_value= ac_cv_env_THEORA_CFLAGS_set= ac_cv_env_THEORA_CFLAGS_value= ac_cv_env_THEORA_LIBS_set= ac_cv_env_THEORA_LIBS_value= ac_cv_env_YACC_set= ac_cv_env_YACC_value= ac_cv_env_YFLAGS_set= ac_cv_env_YFLAGS_value= ac_cv_env_build_alias_set= ac_cv_env_build_alias_value= ac_cv_env_host_alias_set= ac_cv_env_host_alias_value= ac_cv_env_target_alias_set= ac_cv_env_target_alias_value= ac_cv_func_strlcat=no ac_cv_func_strlcpy=no ac_cv_header_SDL_SDL_net_h=yes ac_cv_header_SDL_SDL_opengl_h=yes ac_cv_header_inttypes_h=yes ac_cv_header_memory_h=yes ac_cv_header_physfs_h=yes ac_cv_header_popt_h=yes ac_cv_header_stdc=yes ac_cv_header_stdint_h=yes ac_cv_header_stdlib_h=yes ac_cv_header_string_h=yes ac_cv_header_strings_h=yes ac_cv_header_sys_stat_h=yes ac_cv_header_sys_types_h=yes ac_cv_header_unistd_h=yes ac_cv_host=x86_64-unknown-linux-gnu ac_cv_lib_GL_main=no ac_cv_lib_SDL_net_SDLNet_Init=yes ac_cv_lib_lex=-lfl ac_cv_lib_opengl32_main=no ac_cv_lib_physfs_PHYSFS_init=yes ac_cv_lib_popt_poptGetContext=yes ac_cv_objext=o ac_cv_path_EGREP='/bin/grep -E' ac_cv_path_GMSGFMT=/usr/bin/msgfmt ac_cv_path_GREP=/bin/grep ac_cv_path_MSGFMT=/usr/bin/msgfmt ac_cv_path_MSGMERGE=/usr/bin/msgmerge ac_cv_path_PERL=/usr/bin/perl ac_cv_path_SED=/bin/sed ac_cv_path_XGETTEXT=/usr/bin/xgettext ac_cv_path_ac_pt_PKG_CONFIG=/usr/bin/pkg-config ac_cv_path_install='/usr/bin/install -c' ac_cv_path_mkdir=/bin/mkdir ac_cv_prog_AWK=mawk ac_cv_prog_CPP='gcc -std=gnu99 -E' ac_cv_prog_LEX=flex ac_cv_prog_YACC='bison -y' ac_cv_prog_ac_ct_CC=gcc ac_cv_prog_ac_ct_CXX=g++ ac_cv_prog_ac_ct_RANLIB=ranlib ac_cv_prog_cc_c89= ac_cv_prog_cc_c99=-std=gnu99 ac_cv_prog_cc_g=yes ac_cv_prog_cc_stdc=-std=gnu99 ac_cv_prog_cxx_g=yes ac_cv_prog_lex_root=lex.yy ac_cv_prog_lex_yytext_pointer=yes ac_cv_prog_make_make_set=yes acl_cv_hardcode_direct=no acl_cv_hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' acl_cv_hardcode_libdir_separator= acl_cv_hardcode_minus_L=no acl_cv_libext=a acl_cv_libname_spec='lib$name' acl_cv_library_names_spec='$libname$shrext' acl_cv_path_LD=/usr/bin/ld acl_cv_prog_gnu_ld=yes acl_cv_rpath=done acl_cv_shlibext=so acl_cv_wl=-Wl, am_cv_CC_dependencies_compiler_type=gcc3 am_cv_CXX_dependencies_compiler_type=gcc3 gt_cv_func_CFLocaleCopyCurrent=no gt_cv_func_CFPreferencesCopyAppValue=no gt_cv_func_gnugettext1_libc=yes pkg_cv_OGGVORBIS_CFLAGS=' ' pkg_cv_OGGVORBIS_LIBS='-lvorbisfile -lvorbis -lm -logg ' pkg_cv_OPENAL_CFLAGS=' ' pkg_cv_OPENAL_LIBS='-lopenal ' pkg_cv_PNG_CFLAGS='-I/usr/include/libpng12 ' pkg_cv_PNG_LIBS='-lpng12 ' pkg_cv_SDL_CFLAGS='-D_GNU_SOURCE=1 -D_REENTRANT -I/usr/include/SDL ' pkg_cv_SDL_LIBS='-lSDL ' pkg_cv_THEORA_CFLAGS=' ' pkg_cv_THEORA_LIBS='-ltheora -logg ' ## ----------------- ## ## Output variables. ## ## ----------------- ## ACLOCAL='${SHELL} /home/user42/Desktop/warzone2100-2.2.0/missing --run aclocal-1.10' AMDEPBACKSLASH='\' AMDEP_FALSE='#' AMDEP_TRUE='' AMTAR='${SHELL} /home/user42/Desktop/warzone2100-2.2.0/missing --run tar' AUTOCONF='${SHELL} /home/user42/Desktop/warzone2100-2.2.0/missing --run autoconf' AUTOHEADER='${SHELL} /home/user42/Desktop/warzone2100-2.2.0/missing --run autoheader' AUTOMAKE='${SHELL} /home/user42/Desktop/warzone2100-2.2.0/missing --run automake-1.10' AWK='mawk' BFD_LIBS='' CC='gcc -std=gnu99' CCDEPMODE='depmode=gcc3' CC_FOR_BUILD='gcc -std=gnu99' CFLAGS='' CPP='gcc -std=gnu99 -E' CPPFLAGS='' CPPFLAGS_FOR_BUILD='' CXX='g++' CXXDEPMODE='depmode=gcc3' CXXFLAGS='-g -O2' CXX_FOR_BUILD='g++' CYGPATH_W='echo' DEFS='' DEPDIR='.deps' ECHO_C='' ECHO_N='-n' ECHO_T='' EGREP='/bin/grep -E' EXEEXT='' FONTCONFIG_CFLAGS='' FONTCONFIG_LIBS='' FREETYPE_CFLAGS='' FREETYPE_LIBS='' GETTEXT_MACRO_VERSION='0.17' GMSGFMT='/usr/bin/msgfmt' GMSGFMT_015='/usr/bin/msgfmt' GREP='/bin/grep' IBERTY_LIBS='' INSTALLER_COMPRESSION='lzma' INSTALLER_EXTDIR='' INSTALLER_FALSE='' INSTALLER_TRUE='#' INSTALLER_VERSION='' INSTALL_DATA='${INSTALL} -m 644' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' INSTALL_STRIP_PROGRAM='$(install_sh) -c -s' INTLLIBS='' INTL_MACOSX_LIBS='' LDFLAGS='-rdynamic ' LEX='flex' LEXLIB='-lfl' LEX_OUTPUT_ROOT='lex.yy' LIBICONV='-liconv' LIBINTL='' LIBOBJS='' LIBS='' LTLIBICONV='-liconv' LTLIBINTL='' LTLIBOBJS='' MAKEINFO='${SHELL} /home/user42/Desktop/warzone2100-2.2.0/missing --run makeinfo' MAKENSIS='' MINGW32_FALSE='' MINGW32_TRUE='#' MSGFMT='/usr/bin/msgfmt' MSGFMT_015='/usr/bin/msgfmt' MSGMERGE='/usr/bin/msgmerge' OBJEXT='o' OGGVORBIS_CFLAGS=' ' OGGVORBIS_LIBS='-lvorbisfile -lvorbis -lm -logg ' OPENAL_CFLAGS=' ' OPENAL_LIBS='-lopenal ' OPENGLC_LIBS='' OPENGL_LIBS='' PACKAGE='warzone2100' PACKAGE_BUGREPORT='http://wz2100.net/' PACKAGE_NAME='Warzone 2100' PACKAGE_STRING='Warzone 2100 2.2.0' PACKAGE_TARNAME='warzone2100' PACKAGE_VERSION='2.2.0' PATH_SEPARATOR=':' PERL='/usr/bin/perl' PERL_AVAILABLE_FALSE='#' PERL_AVAILABLE_TRUE='' PERL_VERSION='5.10.0' PHYSFS_LIBS='-lphysfs' PKGCONFIG_PREFIX='' PKG_CONFIG='/usr/bin/pkg-config' PNG_CFLAGS='-I/usr/include/libpng12 ' PNG_LIBS='-lpng12 ' POPT_LIBS='-lpopt' POSUB='po' RANLIB='ranlib' SDL_CFLAGS='-D_GNU_SOURCE=1 -D_REENTRANT -I/usr/include/SDL ' SDL_LIBS='-lSDL ' SDL_NET_LIBS='-lSDL_net' SED='/bin/sed' SET_MAKE='' SHELL='/bin/sh' SQLITE_CFLAGS='-I$(top_srcdir)/lib/sqlite3' SQLITE_LIBS='$(top_builddir)/lib/sqlite3/libsqlite3.a' STRIP='' THEORA_CFLAGS=' ' THEORA_LIBS='-ltheora -logg ' USE_NLS='yes' USE_SYSTEM_SQLITE_FALSE='' USE_SYSTEM_SQLITE_TRUE='#' VERSION='2.2.0' WIN32_LIBS='' WINDRES='' WZ_CFLAGS=' -O0 -g -Wall -Werror -Wno-unused-label -Wno-pointer-to-int-cast -Wmissing-field-initializers -Wcast-align -Wwrite-strings -Wmissing-declarations -Wstrict-prototypes -Wpointer-arith -Wno-format-security' WZ_CPPFLAGS=' -DDEBUG' XGETTEXT='/usr/bin/xgettext' XGETTEXT_015='/usr/bin/xgettext' XGETTEXT_EXTRA_OPTIONS='' YACC='bison -y' YFLAGS='' ac_ct_CC='gcc' ac_ct_CXX='g++' am__fastdepCC_FALSE='#' am__fastdepCC_TRUE='' am__fastdepCXX_FALSE='#' am__fastdepCXX_TRUE='' am__include='include' am__isrc='' am__leading_dot='.' am__quote='' am__tar='${AMTAR} chof - "$$tardir"' am__untar='${AMTAR} xf -' applicationdir='${datarootdir}/applications' bindir='${exec_prefix}/bin' build='x86_64-unknown-linux-gnu' build_alias='' build_cpu='x86_64' build_os='linux-gnu' build_vendor='unknown' datadir='${datarootdir}' datarootdir='${prefix}/share' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' dvidir='${docdir}' exec_prefix='NONE' host='x86_64-unknown-linux-gnu' host_alias='' host_cpu='x86_64' host_os='linux-gnu' host_vendor='unknown' htmldir='${docdir}' icondir='${datarootdir}/icons' includedir='${prefix}/include' infodir='${datarootdir}/info' install_sh='$(SHELL) /home/user42/Desktop/warzone2100-2.2.0/install-sh' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='${prefix}/var' mandir='${datarootdir}/man' mkdir_p='/bin/mkdir -p' oldincludedir='/usr/include' pdfdir='${docdir}' prefix='NONE' program_transform_name='s,x,x,' psdir='${docdir}' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' sysconfdir='${prefix}/etc' target_alias='' ## ----------- ## ## confdefs.h. ## ## ----------- ## #define PACKAGE_NAME "Warzone 2100" #define PACKAGE_TARNAME "warzone2100" #define PACKAGE_VERSION "2.2.0" #define PACKAGE_STRING "Warzone 2100 2.2.0" #define PACKAGE_BUGREPORT "http://wz2100.net/" #define PACKAGE "warzone2100" #define VERSION "2.2.0" #define YYTEXT_POINTER 1 #define _GNU_SOURCE 1 #define ENABLE_NLS 1 #define HAVE_GETTEXT 1 #define HAVE_DCGETTEXT 1 #define _XOPEN_SOURCE 600 #define PACKAGE_DISTRIBUTOR "UNKNOWN" #define STDC_HEADERS 1 #define HAVE_SYS_TYPES_H 1 #define HAVE_SYS_STAT_H 1 #define HAVE_STDLIB_H 1 #define HAVE_STRING_H 1 #define HAVE_MEMORY_H 1 #define HAVE_STRINGS_H 1 #define HAVE_INTTYPES_H 1 #define HAVE_STDINT_H 1 #define HAVE_UNISTD_H 1 configure: exit 1