Linux version 2.6.30-SilverSurfer (root@SilverSurfer) (gcc version 4.4.0 20090526 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 30 15:10:48 CEST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable) BIOS-e820: 000000007f6d0000 - 000000007f6df000 (ACPI NVS) BIOS-e820: 000000007f6df000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x7f6d0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 07F700000 mask FFFF00000 uncachable 2 base 07F800000 mask FFF800000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000002000 (usable) modified: 0000000000002000 - 0000000000006000 (reserved) modified: 0000000000006000 - 000000000009f800 (usable) modified: 000000000009f800 - 00000000000a0000 (reserved) modified: 00000000000e0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000007f6d0000 (usable) modified: 000000007f6d0000 - 000000007f6df000 (ACPI NVS) modified: 000000007f6df000 - 0000000080000000 (reserved) modified: 00000000e0000000 - 00000000f0000000 (reserved) modified: 00000000fec00000 - 00000000fec10000 (reserved) modified: 00000000fed00000 - 00000000fed00400 (reserved) modified: 00000000fed14000 - 00000000fed1a000 (reserved) modified: 00000000fed1c000 - 00000000fed90000 (reserved) modified: 00000000fee00000 - 00000000fee01000 (reserved) modified: 00000000ff000000 - 0000000100000000 (reserved) init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 7000-c000 ACPI: RSDP 000f80d0 00024 (v02 PTLTD ) ACPI: XSDT 7f6d4084 00084 (v01 DSGLTD DSGVISTA 06040000 LTP 00000000) ACPI: FACP 7f6dbc94 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) ACPI: DSDT 7f6d6108 05B18 (v02 DIXON_ DIXONSXP 06040000 INTL 20061109) ACPI: FACS 7f6defc0 00040 ACPI: HPET 7f6dbd88 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) ACPI: MCFG 7f6dbdc0 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) ACPI: TMOR 7f6dbdfc 00026 (v01 PTLTD 06040000 PTL 00000003) ACPI: APIC 7f6dbe22 00068 (v01 PTLTD APIC 06040000 LTP 00000000) ACPI: SLIC 7f6dbe8a 00176 (v01 DSGLTD DSGVISTA 06040000 LTP 00000000) ACPI: SSDT 7f6d5ab9 0064F (v01 SataRe SataPri 00001000 INTL 20061109) ACPI: SSDT 7f6d5427 00692 (v01 SataRe SataSec 00001000 INTL 20061109) ACPI: SSDT 7f6d5357 000D0 (v01 BrtRef DD01BRT 00001000 INTL 20061109) ACPI: SSDT 7f6d4745 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20061109) ACPI: SSDT 7f6d469f 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20061109) ACPI: SSDT 7f6d4108 00597 (v01 PmRef CpuPm 00003000 INTL 20061109) ACPI: Local APIC address 0xfee00000 1150MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 node 0 low ram: 00000000 - 377fe000 node 0 bootmap 00008000 - 0000ef00 (8 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 0000759754] TEXT DATA BSS ==> [0000100000 - 0000759754] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #5 [000075a000 - 000075d120] BRK ==> [000075a000 - 000075d120] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] found SMP MP-table at [c00f8100] f8100 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0007f6d0 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x00000002 0: 0x00000006 -> 0x0000009f 0: 0x00000100 -> 0x0007f6d0 On node 0 totalpages: 521835 free_area_init_node: node 0, pgdat c05f07e0, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3963 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 2302 pages used for memmap HighMem zone: 292308 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 0000000000002000 - 0000000000006000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 11 pages at c1ffa000, static data 24444 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517757 Kernel command line: root=/dev/sda5 ro quiet i915.modeset=1 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 NR_IRQS:512 PID hash table entries: 4096 (order: 12, 16384 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 1828.782 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing HighMem for node 0 (000377fe:0007f6d0) Memory: 2062696k/2087744k available (3848k kernel code, 23796k reserved, 1313k data, 400k init, 1178440k highmem) virtual kernel memory layout: fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc0612000 - 0xc0676000 ( 400 kB) .data : 0xc04c22a3 - 0xc060a7d8 (1313 kB) .text : 0xc0100000 - 0xc04c22a3 (3848 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 3659.96 BogoMIPS (lpj=6095940) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20090320 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3658.91 BogoMIPS (lpj=6095865) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (7318.87 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 net_namespace: 1056 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0xfc000000-0xfc0fffff] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] pci 0000:00:02.1: reg 10 64bit mmio: [0xfc100000-0xfc1fffff] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc504000-0xfc5043ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc500000-0xfc503fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1