[17179569.184000] Linux version 2.6.15-26-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Thu Aug 3 02:52:00 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
[17179569.184000]  BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
[17179569.184000]  BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 262064
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 32688 pages, LIFO batch:7
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f8c20
[17179569.184000] ACPI: RSDT (v001 A M I  OEMRSDT  0x10000408 MSFT 0x00000097) @ 0x3ffb0000
[17179569.184000] ACPI: FADT (v002 A M I  OEMFACP  0x10000408 MSFT 0x00000097) @ 0x3ffb0200
[17179569.184000] ACPI: MADT (v001 A M I  OEMAPIC  0x10000408 MSFT 0x00000097) @ 0x3ffb0300
[17179569.184000] ACPI: OEMB (v001 A M I  OEMBIOS  0x10000408 MSFT 0x00000097) @ 0x3ffc0040
[17179569.184000] ACPI: DSDT (v001  K7V88 K7V88001 0x00000001 INTL 0x02002026) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:10 APIC version 16
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bffc0000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda2 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 2000.356 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.568000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179570.568000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.600000] Memory: 1028564k/1048256k available (1976k kernel code, 18932k reserved, 606k data, 288k init, 130752k highmem)
[17179570.600000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179570.680000] Calibrating delay using timer specific routine.. 4005.13 BogoMIPS (lpj=8010267)
[17179570.680000] Security Framework v1.0.0 initialized
[17179570.680000] SELinux:  Disabled at boot.
[17179570.680000] Mount-cache hash table entries: 512
[17179570.680000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179570.680000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179570.680000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179570.680000] CPU: L2 Cache: 512K (64 bytes/line)
[17179570.680000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[17179570.680000] mtrr: v2.0 (20020519)
[17179570.680000] CPU: AMD Athlon(tm) XP 2600+ stepping 00
[17179570.680000] Enabling fast FPU save and restore... done.
[17179570.680000] Enabling unmasked SIMD FPU exception support... done.
[17179570.680000] Checking 'hlt' instruction... OK.
[17179570.696000] checking if image is initramfs... it is
[17179571.216000] Freeing initrd memory: 6617k freed
[17179571.228000] ACPI: Looking for DSDT ... not found!
[17179571.232000] ENABLING IO-APIC IRQs
[17179571.232000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179571.376000] NET: Registered protocol family 16
[17179571.376000] EISA bus registered
[17179571.376000] ACPI: bus type pci registered
[17179571.376000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[17179571.376000] PCI: Using configuration type 1
[17179571.376000] ACPI: Subsystem revision 20051216
[17179571.380000] ACPI: Interpreter enabled
[17179571.380000] ACPI: Using IOAPIC for interrupt routing
[17179571.380000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179571.380000] PCI: Probing PCI hardware (bus 00)
[17179571.384000] Boot video device is 0000:01:00.0
[17179571.384000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.396000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179571.396000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[17179571.396000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179571.396000] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[17179571.396000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.396000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.396000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.396000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.396000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.396000] pnp: PnP ACPI init
[17179571.400000] pnp: PnP ACPI: found 9 devices
[17179571.400000] PnPBIOS: Disabled by ACPI PNP
[17179571.400000] PCI: Using ACPI for IRQ routing
[17179571.400000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179571.404000] PCI: Bridge: 0000:00:01.0
[17179571.404000]   IO window: disabled.
[17179571.404000]   MEM window: faa00000-feafffff
[17179571.404000]   PREFETCH window: b7f00000-c7efffff
[17179571.404000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179571.404000] audit: initializing netlink socket (disabled)
[17179571.404000] audit(1156866152.404:1): initialized
[17179571.404000] highmem bounce pool size: 64 pages
[17179571.404000] VFS: Disk quotas dquot_6.5.1
[17179571.404000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.404000] Initializing Cryptographic API
[17179571.404000] io scheduler noop registered
[17179571.404000] io scheduler anticipatory registered
[17179571.404000] io scheduler deadline registered
[17179571.404000] io scheduler cfq registered
[17179571.404000] PCI: Bypassing VIA 8237 APIC De-Assert Message
[17179571.404000] isapnp: Scanning for PnP cards...
[17179571.760000] isapnp: No Plug & Play device found
[17179571.772000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[17179571.772000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179571.772000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.772000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.772000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179571.772000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.772000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.776000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.776000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.776000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.776000] mice: PS/2 mouse device common for all mice
[17179571.776000] EISA: Probing bus 0 at eisa.0
[17179571.776000] EISA: Detected 0 cards.
[17179571.776000] NET: Registered protocol family 2
[17179571.812000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.812000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
[17179571.812000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.812000] TCP: Hash tables configured (established 262144 bind 65536)
[17179571.812000] TCP reno registered
[17179571.812000] TCP bic registered
[17179571.812000] NET: Registered protocol family 1
[17179571.812000] NET: Registered protocol family 8
[17179571.812000] NET: Registered protocol family 20
[17179571.812000] Using IPI Shortcut mode
[17179571.812000] ACPI wakeup devices: 
[17179571.812000] PCI0 PS2K UAR1 MC97 USB1 USB2 USB3 USB4 ILAN 
[17179571.812000] ACPI: (supports S0 S1 S3 S4 S5)
[17179571.812000] Freeing unused kernel memory: 288k freed
[17179571.824000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179571.860000] vga16fb: initializing
[17179571.860000] vga16fb: mapped to 0xc00a0000
[17179572.016000] Console: switching to colour frame buffer device 80x25
[17179572.016000] fb0: VGA16 VGA frame buffer device
[17179573.144000] Capability LSM initialized
[17179573.576000] SCSI subsystem initialized
[17179573.580000] ACPI: bus type scsi registered
[17179573.580000] libata version 1.20 loaded.
[17179573.580000] sata_via 0000:00:0f.0: version 1.1
[17179573.580000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169
[17179573.580000] sata_via 0000:00:0f.0: routed to hard irq line 10
[17179573.580000] ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 169
[17179573.580000] ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 169
[17179573.744000] ata1: dev 0 cfg 00:427a 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3e01 87:4023 88:407f 93:0000
[17179573.744000] ata1: dev 0 ATA-7, max UDMA/133, 781422768 sectors: LBA48
[17179573.744000] sata_get_dev_handle: SATA dev addr=0xf0000, handle=0x00000000
[17179573.744000] ata1: dev 0 configured for UDMA/133
[17179573.744000] sata_get_dev_handle: SATA dev addr=0xf0000, handle=0x00000000
[17179573.744000] scsi0 : sata_via
[17179574.948000] scsi1 : sata_via
[17179574.948000]   Vendor: ATA       Model: WDC WD4000KD-19N  Rev: 01.0
[17179574.948000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[17179574.956000] Driver 'sd' needs updating - please use bus_type methods
[17179574.956000] SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB)
[17179574.956000] SCSI device sda: drive cache: write back
[17179574.956000] SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB)
[17179574.956000] SCSI device sda: drive cache: write back
[17179574.956000]  sda: sda1
[17179575.064000] sd 0:0:0:0: Attached scsi disk sda
[17179575.160000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[17179575.160000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169
[17179575.160000] PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 9
[17179575.160000] VP_IDE: chipset revision 6
[17179575.160000] VP_IDE: not 100% native mode: will probe irqs later
[17179575.160000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[17179575.160000]     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
[17179575.160000]     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
[17179575.160000] Probing IDE interface ide0...
[17179575.576000] hda: Maxtor 6Y080L0, ATA DISK drive
[17179576.248000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179576.260000] Probing IDE interface ide1...
[17179577.124000] hdc: LITE-ON COMBO SOHC-5236K, ATAPI CD/DVD-ROM drive
[17179577.796000] ide1 at 0x170-0x177,0x376 on irq 15
[17179577.808000] hda: max request size: 128KiB
[17179577.816000] hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[17179577.816000] hda: cache flushes supported
[17179577.816000]  hda: hda1 hda2 hda3 < hda5 hda6 hda7 >
[17179577.856000] hdc: ATAPI 52X DVD-ROM CD-R/RW drive, 1536kB Cache
[17179577.856000] Uniform CD-ROM driver Revision: 3.20
[17179578.248000] usbcore: registered new driver usbfs
[17179578.248000] usbcore: registered new driver hub
[17179578.248000] USB Universal Host Controller Interface driver v2.3
[17179578.248000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177
[17179578.248000] PCI: VIA IRQ fixup for 0000:00:10.0, from 11 to 1
[17179578.248000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179578.248000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179578.248000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000c000
[17179578.252000] hub 1-0:1.0: USB hub found
[17179578.252000] hub 1-0:1.0: 2 ports detected
[17179578.356000] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 177
[17179578.356000] PCI: VIA IRQ fixup for 0000:00:10.1, from 11 to 1
[17179578.356000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179578.356000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179578.356000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000c400
[17179578.356000] hub 2-0:1.0: USB hub found
[17179578.356000] hub 2-0:1.0: 2 ports detected
[17179578.460000] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 177
[17179578.460000] PCI: VIA IRQ fixup for 0000:00:10.2, from 10 to 1
[17179578.460000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179578.460000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[17179578.460000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000c800
[17179578.460000] hub 3-0:1.0: USB hub found
[17179578.460000] hub 3-0:1.0: 2 ports detected
[17179578.564000] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 177
[17179578.564000] PCI: VIA IRQ fixup for 0000:00:10.3, from 10 to 1
[17179578.564000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[17179578.564000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[17179578.564000] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000cc00
[17179578.564000] hub 4-0:1.0: USB hub found
[17179578.564000] hub 4-0:1.0: 2 ports detected
[17179578.596000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[17179578.668000] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 177
[17179578.668000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[17179578.668000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[17179578.668000] ehci_hcd 0000:00:10.4: irq 177, io mem 0xfebff800
[17179578.668000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179578.668000] hub 5-0:1.0: USB hub found
[17179578.668000] hub 5-0:1.0: 8 ports detected
[17179578.844000] Attempting manual resume
[17179578.868000] EXT3-fs: mounted filesystem with ordered data mode.
[17179578.880000] kjournald starting.  Commit interval 5 seconds
[17179579.120000] usb 1-1: device not accepting address 2, error -71
[17179580.864000] usb 1-1: new full speed USB device using uhci_hcd and address 4
[17179581.244000] usb 1-2: new low speed USB device using uhci_hcd and address 5
[17179581.656000] usb 3-2: new full speed USB device using uhci_hcd and address 2
[17179588.840000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179590.376000] Linux agpgart interface v0.101 (c) Dave Jones
[17179590.396000] agpgart: Detected VIA KT880 chipset
[17179590.404000] agpgart: AGP aperture is 128M @ 0xe0000000
[17179590.452000] Linux video capture interface: v1.00
[17179590.760000] ivtv: no version for "struct_module" found: kernel tainted.
[17179590.760000] ivtv:  ==================== START INIT IVTV ====================
[17179590.760000] ivtv:  version 0.4.6 (tagged release) loading
[17179590.760000] ivtv:  Linux version: 2.6.15-26-386 preempt 486 gcc-4.0
[17179590.760000] ivtv:  In case of problems please include the debug info between
[17179590.760000] ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
[17179590.760000] ivtv:  any module options, when mailing the ivtv-users mailinglist.
[17179590.760000] ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
[17179590.760000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 185
[17179590.900000] tveeprom: ivtv version
[17179590.900000] tveeprom: Hauppauge: model = 26582, rev = F0B2, serial# = 9496757
[17179590.900000] tveeprom: tuner = TCL M2523_5N_E (idx = 112, type = 50)
[17179590.900000] tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
[17179590.900000] tveeprom: audio processor = CX25843 (type = 25)
[17179590.900000] tveeprom: decoder processor = CX25843 (type = 1e)
[17179590.900000] ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
[17179590.912000] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
[17179590.912000] ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
[17179591.060000] cx25840 0-0044: ivtv driver
[17179591.060000] cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
[17179591.224000] lirc_dev: IR Remote Control driver registered, at major 61 
[17179591.248000] 
[17179591.248000] lirc_mceusb2: USB remote driver for LIRC v0.22
[17179591.248000] lirc_mceusb2: Martin Blatter <martin_a_blatter@yahoo.com>
[17179591.272000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179591.364000] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[17179591.416000] input: PC Speaker as /class/input/input1
[17179591.448000] Real Time Clock Driver v1.12
[17179591.500000] lirc_dev: lirc_register_plugin: sample_rate: 0
[17179591.504000] lirc_mceusb2[2]: SMK eHome Infrared Transceiver on usb3:2
[17179591.504000] usbcore: registered new driver lirc_mceusb2
[17179591.600000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[17179591.760000] usbcore: registered new driver hiddev
[17179591.780000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[17179591.780000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.0-2
[17179591.780000] usbcore: registered new driver usbhid
[17179591.780000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179593.832000] ts: Compaq touchscreen protocol output
[17179594.228000] cx25840 0-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
[17179594.284000] ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
[17179594.284000] usbcore: registered new driver usbserial
[17179594.288000] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[17179594.288000] usbcore: registered new driver usbserial_generic
[17179594.288000] drivers/usb/serial/usb-serial.c: USB Serial Driver core
[17179594.296000] drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
[17179594.296000] pl2303 1-1:1.0: pl2303 converter detected
[17179594.296000] usb 1-1: pl2303 converter now attached to ttyUSB0
[17179594.296000] usbcore: registered new driver pl2303
[17179594.296000] drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
[17179594.352000] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
[17179594.356000] ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
[17179595.096000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
[17179595.312000] ivtv0: Encoder revision: 0x02050032
[17179595.312000] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
[17179595.312000] ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
[17179595.312000] ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
[17179595.312000] ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
[17179595.312000] tuner: type set to 50 (TCL 2002N) by ivtv i2c driver #0
[17179595.384000] ivtv0: Initialized WinTV PVR 150, card #0
[17179595.384000] ivtv:  ====================  END INIT IVTV  ====================
[17179595.408000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 193
[17179595.408000] eth0: VIA Rhine II at 0x1d400, 00:0b:6a:76:35:90, IRQ 193.
[17179595.408000] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[17179595.428000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179595.488000] nvidia: module license 'NVIDIA' taints kernel.
[17179595.492000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 201
[17179595.496000] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-8762  Mon May 15 13:06:38 PDT 2006
[17179595.520000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 209
[17179595.520000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179595.840000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17179596.568000] lp: driver loaded but no devices found
[17179596.908000] usbcore: registered new driver lirc_mceusb
[17179596.908000] /home/word/Desktop/lirc/lirc-0.8.0/drivers/lirc_mceusb/lirc_mceusb.c: USB Microsoft IR Transceiver Driver v0.2
[17179596.920000] NET: Registered protocol family 17
[17179596.964000] Adding 1558264k swap on /dev/hda5.  Priority:-1 extents:1 across:1558264k
[17179597.104000] EXT3 FS on hda2, internal journal
[17179597.292000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179597.292000] md: bitmap version 4.39
[17179597.764000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179598.896000] cdrom: open failed.
[17179599.256000] cdrom: open failed.
[17179599.348000] cdrom: open failed.
[17179599.388000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[17179599.452000] NTFS volume version 3.1.
[17179599.540000] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[17179599.540000] SGI XFS Quota Management subsystem
[17179599.540000] XFS mounting filesystem sda1
[17179599.632000] Ending clean XFS mount for filesystem: sda1
[17179600.732000] NET: Registered protocol family 10
[17179600.732000] lo: Disabled Privacy Extensions
[17179600.732000] IPv6 over IPv4 tunneling driver
[17179602.008000] ACPI: Power Button (FF) [PWRF]
[17179602.008000] ACPI: Power Button (CM) [PWRB]
[17179602.124000] ibm_acpi: ec object not found
[17179602.160000] pcc_acpi: loading...
[17179604.636000] ppdev: user-space parallel port driver
[17179605.296000] apm: BIOS not found.
[17179611.232000] eth0: no IPv6 routers present
[17179611.628000] Bluetooth: Core ver 2.8
[17179611.628000] NET: Registered protocol family 31
[17179611.628000] Bluetooth: HCI device and connection manager initialized
[17179611.628000] Bluetooth: HCI socket layer initialized
[17179611.656000] Bluetooth: L2CAP ver 2.8
[17179611.656000] Bluetooth: L2CAP socket layer initialized
[17179611.672000] Bluetooth: RFCOMM socket layer initialized
[17179611.672000] Bluetooth: RFCOMM TTY layer initialized
[17179611.672000] Bluetooth: RFCOMM ver 1.7
[17179629.048000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17179629.052000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17179629.052000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17179629.268000] i2c_adapter i2c-2: SMBus Quick command not supported, can't probe for chips
[17179629.268000] i2c_adapter i2c-3: SMBus Quick command not supported, can't probe for chips
[17179629.268000] i2c_adapter i2c-4: SMBus Quick command not supported, can't probe for chips
[17181199.100000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17181199.100000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17181199.100000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17181850.844000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17181850.844000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17181850.844000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17182012.808000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17182012.808000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17182012.808000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17182212.840000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17182212.840000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17182212.840000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17182624.824000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17182624.824000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17182624.824000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17188180.692000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17188433.540000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17188990.244000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17189074.120000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17189714.896000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17191078.004000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17192237.468000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17192237.468000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17192237.468000] ata1: error=0x84 { DriveStatusError BadCRC }
[17192349.040000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17192349.040000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17192349.040000] ata1: error=0x84 { DriveStatusError BadCRC }
[17192450.352000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17192450.352000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17192450.352000] ata1: error=0x84 { DriveStatusError BadCRC }
[17197724.084000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17197724.084000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17197724.084000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17199197.408000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17199197.408000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17199197.408000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17199281.840000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17199281.840000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17199281.840000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17199341.412000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17199365.004000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17199365.004000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17199365.004000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17199662.792000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17199859.576000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17199901.220000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17202378.712000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17202378.712000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17202378.712000] ata1: error=0x84 { DriveStatusError BadCRC }
[17202580.444000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17202580.444000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17202580.444000] ata1: error=0x84 { DriveStatusError BadCRC }
[17203233.968000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17203233.968000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17203233.968000] ata1: error=0x84 { DriveStatusError BadCRC }
[17204095.556000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17204095.556000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17204095.556000] ata1: error=0x84 { DriveStatusError BadCRC }
[17206252.268000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17206260.320000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17206737.248000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17207702.808000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17207724.932000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17207790.556000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17208076.840000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17208102.752000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17208125.472000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17208207.296000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17208386.468000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17208407.944000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17208407.960000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17208452.688000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17208497.196000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17208518.360000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17208563.060000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17208563.120000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17208563.120000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17208563.120000] ata1: error=0x84 { DriveStatusError BadCRC }
[17209573.568000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17209573.568000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17209573.568000] ata1: error=0x84 { DriveStatusError BadCRC }
[17267428.280000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17267593.940000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17268326.440000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17269740.500000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17269740.500000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17269740.500000] ata1: error=0x84 { DriveStatusError BadCRC }
[17269770.292000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17269770.292000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17269770.292000] ata1: error=0x84 { DriveStatusError BadCRC }
[17274543.612000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17274543.900000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17274921.332000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17275152.824000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17275842.228000] ivtv0 warning: ENC: (0) DMA Error 0x0000000b
[17278494.648000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17278494.648000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17278494.648000] ata1: error=0x84 { DriveStatusError BadCRC }
[17278885.920000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17278885.920000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17278885.920000] ata1: error=0x84 { DriveStatusError BadCRC }
[17279621.472000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17279621.472000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17279621.472000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291245.144000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291245.144000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291245.144000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291245.424000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291245.424000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291245.424000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291246.896000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291246.896000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291246.896000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291247.156000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291247.156000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291247.156000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291247.688000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291247.688000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291247.688000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291247.940000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291247.940000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291247.940000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291249.548000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291249.548000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291249.548000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291249.872000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291249.872000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291249.872000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291250.276000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291250.276000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291250.276000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291250.504000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291250.504000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291250.504000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291251.552000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291251.552000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291251.552000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291251.944000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291251.944000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291251.944000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291251.956000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291251.956000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291251.956000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291253.216000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291253.216000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291253.216000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291254.104000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291254.104000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291254.104000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291255.148000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291255.148000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291255.148000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291256.868000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291256.868000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291256.868000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291257.592000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291257.592000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291257.592000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291258.016000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291258.016000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291258.016000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291258.948000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291258.948000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291258.948000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291259.396000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291259.396000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291259.396000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291259.748000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291259.748000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291259.748000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291260.108000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291260.108000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291260.108000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291260.440000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291260.440000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291260.440000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291261.568000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291261.568000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291261.568000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291262.148000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291262.148000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291262.148000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291262.248000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291262.248000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291262.248000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291263.488000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291263.488000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291263.488000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291264.516000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291264.516000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291264.516000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291264.688000] ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291264.688000] ata1: status=0x51 { DriveReady SeekComplete Error }
[17291264.688000] ata1: error=0x84 { DriveStatusError BadCRC }
[17291294.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17291294.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291294.768000] ata1: status=0xd0 { Busy }
[17291294.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17291294.768000] sda: Current: sense key: Aborted Command
[17291294.768000]     Additional sense: Scsi parity error
[17291294.768000] end_request: I/O error, dev sda, sector 109127479
[17291324.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17291324.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291324.768000] ata1: status=0xd0 { Busy }
[17291324.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17291324.768000] sda: Current: sense key: Aborted Command
[17291324.768000]     Additional sense: Scsi parity error
[17291324.768000] end_request: I/O error, dev sda, sector 109127487
[17291354.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17291354.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291354.768000] ata1: status=0xd0 { Busy }
[17291354.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17291354.768000] sda: Current: sense key: Aborted Command
[17291354.768000]     Additional sense: Scsi parity error
[17291354.768000] end_request: I/O error, dev sda, sector 109127495
[17291384.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17291384.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291384.768000] ata1: status=0xd0 { Busy }
[17291384.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17291384.768000] sda: Current: sense key: Aborted Command
[17291384.768000]     Additional sense: Scsi parity error
[17291384.768000] end_request: I/O error, dev sda, sector 109127503
[17291414.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17291414.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291414.768000] ata1: status=0xd0 { Busy }
[17291414.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17291414.768000] sda: Current: sense key: Aborted Command
[17291414.768000]     Additional sense: Scsi parity error
[17291414.768000] end_request: I/O error, dev sda, sector 109127511
[17291444.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17291444.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291444.768000] ata1: status=0xd0 { Busy }
[17291444.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17291444.768000] sda: Current: sense key: Aborted Command
[17291444.768000]     Additional sense: Scsi parity error
[17291444.768000] end_request: I/O error, dev sda, sector 109127519
[17291474.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17291474.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291474.768000] ata1: status=0xd0 { Busy }
[17291474.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17291474.768000] sda: Current: sense key: Aborted Command
[17291474.768000]     Additional sense: Scsi parity error
[17291474.768000] end_request: I/O error, dev sda, sector 109127527
[17291504.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17291504.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291504.768000] ata1: status=0xd0 { Busy }
[17291504.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17291504.768000] sda: Current: sense key: Aborted Command
[17291504.768000]     Additional sense: Scsi parity error
[17291504.768000] end_request: I/O error, dev sda, sector 109127535
[17291534.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17291534.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291534.768000] ata1: status=0xd0 { Busy }
[17291534.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17291534.768000] sda: Current: sense key: Aborted Command
[17291534.768000]     Additional sense: Scsi parity error
[17291534.768000] end_request: I/O error, dev sda, sector 109127543
[17291564.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17291564.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291564.768000] ata1: status=0xd0 { Busy }
[17291564.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17291564.768000] sda: Current: sense key: Aborted Command
[17291564.768000]     Additional sense: Scsi parity error
[17291564.768000] end_request: I/O error, dev sda, sector 109127551
[17291594.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17291594.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291594.768000] ata1: status=0xd0 { Busy }
[17291594.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17291594.768000] sda: Current: sense key: Aborted Command
[17291594.768000]     Additional sense: Scsi parity error
[17291594.768000] end_request: I/O error, dev sda, sector 109127559
[17291624.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17291624.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291624.768000] ata1: status=0xd0 { Busy }
[17291624.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17291624.768000] sda: Current: sense key: Aborted Command
[17291624.768000]     Additional sense: Scsi parity error
[17291624.768000] end_request: I/O error, dev sda, sector 109127567
[17291654.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17291654.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291654.768000] ata1: status=0xd0 { Busy }
[17291654.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17291654.768000] sda: Current: sense key: Aborted Command
[17291654.768000]     Additional sense: Scsi parity error
[17291654.768000] end_request: I/O error, dev sda, sector 109127575
[17291684.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17291684.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291684.768000] ata1: status=0xd0 { Busy }
[17291684.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17291684.768000] sda: Current: sense key: Aborted Command
[17291684.768000]     Additional sense: Scsi parity error
[17291684.768000] end_request: I/O error, dev sda, sector 109127583
[17291714.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17291714.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291714.768000] ata1: status=0xd0 { Busy }
[17291714.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17291714.768000] sda: Current: sense key: Aborted Command
[17291714.768000]     Additional sense: Scsi parity error
[17291714.768000] end_request: I/O error, dev sda, sector 109127591
[17291744.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17291744.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291744.768000] ata1: status=0xd0 { Busy }
[17291744.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17291744.768000] sda: Current: sense key: Aborted Command
[17291744.768000]     Additional sense: Scsi parity error
[17291744.768000] end_request: I/O error, dev sda, sector 109127599
[17291774.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17291774.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291774.768000] ata1: status=0xd0 { Busy }
[17291774.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17291774.768000] sda: Current: sense key: Aborted Command
[17291774.768000]     Additional sense: Scsi parity error
[17291774.768000] end_request: I/O error, dev sda, sector 109127607
[17291804.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17291804.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291804.768000] ata1: status=0xd0 { Busy }
[17291804.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17291804.768000] sda: Current: sense key: Aborted Command
[17291804.768000]     Additional sense: Scsi parity error
[17291804.768000] end_request: I/O error, dev sda, sector 109127615
[17291834.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17291834.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291834.768000] ata1: status=0xd0 { Busy }
[17291834.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17291834.768000] sda: Current: sense key: Aborted Command
[17291834.768000]     Additional sense: Scsi parity error
[17291834.768000] end_request: I/O error, dev sda, sector 109127623
[17291864.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17291864.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291864.768000] ata1: status=0xd0 { Busy }
[17291864.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17291864.768000] sda: Current: sense key: Aborted Command
[17291864.768000]     Additional sense: Scsi parity error
[17291864.768000] end_request: I/O error, dev sda, sector 109127631
[17291894.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17291894.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291894.768000] ata1: status=0xd0 { Busy }
[17291894.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17291894.768000] sda: Current: sense key: Aborted Command
[17291894.768000]     Additional sense: Scsi parity error
[17291894.768000] end_request: I/O error, dev sda, sector 109127639
[17291924.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17291924.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291924.768000] ata1: status=0xd0 { Busy }
[17291924.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17291924.768000] sda: Current: sense key: Aborted Command
[17291924.768000]     Additional sense: Scsi parity error
[17291924.768000] end_request: I/O error, dev sda, sector 109127647
[17291954.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17291954.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291954.768000] ata1: status=0xd0 { Busy }
[17291954.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17291954.768000] sda: Current: sense key: Aborted Command
[17291954.768000]     Additional sense: Scsi parity error
[17291954.768000] end_request: I/O error, dev sda, sector 109127655
[17291984.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17291984.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17291984.768000] ata1: status=0xd0 { Busy }
[17291984.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17291984.768000] sda: Current: sense key: Aborted Command
[17291984.768000]     Additional sense: Scsi parity error
[17291984.768000] end_request: I/O error, dev sda, sector 109127663
[17292014.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17292014.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17292014.768000] ata1: status=0xd0 { Busy }
[17292014.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17292014.768000] sda: Current: sense key: Aborted Command
[17292014.768000]     Additional sense: Scsi parity error
[17292014.768000] end_request: I/O error, dev sda, sector 109127671
[17292044.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17292044.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17292044.768000] ata1: status=0xd0 { Busy }
[17292044.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17292044.768000] sda: Current: sense key: Aborted Command
[17292044.768000]     Additional sense: Scsi parity error
[17292044.768000] end_request: I/O error, dev sda, sector 108706983
[17292074.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17292074.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17292074.768000] ata1: status=0xd0 { Busy }
[17292074.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17292074.768000] sda: Current: sense key: Aborted Command
[17292074.768000]     Additional sense: Scsi parity error
[17292074.768000] end_request: I/O error, dev sda, sector 108706991
[17292104.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17292104.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17292104.768000] ata1: status=0xd0 { Busy }
[17292104.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17292104.768000] sda: Current: sense key: Aborted Command
[17292104.768000]     Additional sense: Scsi parity error
[17292104.768000] end_request: I/O error, dev sda, sector 108707007
[17292134.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17292134.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17292134.768000] ata1: status=0xd0 { Busy }
[17292134.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17292134.768000] sda: Current: sense key: Aborted Command
[17292134.768000]     Additional sense: Scsi parity error
[17292134.768000] end_request: I/O error, dev sda, sector 108707015
[17292164.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17292164.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17292164.768000] ata1: status=0xd0 { Busy }
[17292164.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17292164.768000] sda: Current: sense key: Aborted Command
[17292164.768000]     Additional sense: Scsi parity error
[17292164.768000] end_request: I/O error, dev sda, sector 108707031
[17292194.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17292194.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17292194.768000] ata1: status=0xd0 { Busy }
[17292194.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17292194.768000] sda: Current: sense key: Aborted Command
[17292194.768000]     Additional sense: Scsi parity error
[17292194.768000] end_request: I/O error, dev sda, sector 108707039
[17292224.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17292224.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17292224.768000] ata1: status=0xd0 { Busy }
[17292224.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17292224.768000] sda: Current: sense key: Aborted Command
[17292224.768000]     Additional sense: Scsi parity error
[17292224.768000] end_request: I/O error, dev sda, sector 109127479
[17292254.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17292254.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17292254.768000] ata1: status=0xd0 { Busy }
[17292254.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17292254.768000] sda: Current: sense key: Aborted Command
[17292254.768000]     Additional sense: Scsi parity error
[17292254.768000] end_request: I/O error, dev sda, sector 87
[17292257.908000] I/O error in filesystem ("sda1") meta-data dev sda1 block 0x18       ("xfs_trans_read_buf") error 5 buf count 4096
[17292257.908000] xfs_force_shutdown(sda1,0x1) called from line 417 of file fs/xfs/xfs_trans_buf.c.  Return address = 0xf9e6b705
[17292284.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17292284.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17292284.768000] ata1: status=0xd0 { Busy }
[17292284.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17292284.768000] sda: Current: sense key: Aborted Command
[17292284.768000]     Additional sense: Scsi parity error
[17292284.768000] end_request: I/O error, dev sda, sector 108706983
[17292314.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17292314.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17292314.768000] ata1: status=0xd0 { Busy }
[17292314.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17292314.768000] sda: Current: sense key: Aborted Command
[17292314.768000]     Additional sense: Scsi parity error
[17292314.768000] end_request: I/O error, dev sda, sector 109127679
[17292344.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17292344.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17292344.768000] ata1: status=0xd0 { Busy }
[17292344.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17292344.768000] sda: Current: sense key: Aborted Command
[17292344.768000]     Additional sense: Scsi parity error
[17292344.768000] end_request: I/O error, dev sda, sector 109127687
[17292374.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17292374.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17292374.768000] ata1: status=0xd0 { Busy }
[17292374.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17292374.768000] sda: Current: sense key: Aborted Command
[17292374.768000]     Additional sense: Scsi parity error
[17292374.768000] end_request: I/O error, dev sda, sector 109127695
[17292404.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17292404.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17292404.768000] ata1: status=0xd0 { Busy }
[17292404.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17292404.768000] sda: Current: sense key: Aborted Command
[17292404.768000]     Additional sense: Scsi parity error
[17292404.768000] end_request: I/O error, dev sda, sector 109127703
[17292434.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17292434.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17292434.768000] ata1: status=0xd0 { Busy }
[17292434.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17292434.768000] sda: Current: sense key: Aborted Command
[17292434.768000]     Additional sense: Scsi parity error
[17292434.768000] end_request: I/O error, dev sda, sector 109127711
[17292464.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17292464.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17292464.768000] ata1: status=0xd0 { Busy }
[17292464.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17292464.768000] sda: Current: sense key: Aborted Command
[17292464.768000]     Additional sense: Scsi parity error
[17292464.768000] end_request: I/O error, dev sda, sector 109127719
[17292494.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17292494.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17292494.768000] ata1: status=0xd0 { Busy }
[17292494.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17292494.768000] sda: Current: sense key: Aborted Command
[17292494.768000]     Additional sense: Scsi parity error
[17292494.768000] end_request: I/O error, dev sda, sector 109127727
[17292524.768000] ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
[17292524.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17292524.768000] ata1: status=0xd0 { Busy }
[17292524.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17292524.768000] sda: Current: sense key: Aborted Command
[17292524.768000]     Additional sense: Scsi parity error
[17292524.768000] end_request: I/O error, dev sda, sector 109127479
[17292554.768000] ata1: command 0x35 timeout, stat 0xd0 host_stat 0x1
[17292554.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17292554.768000] ata1: status=0xd0 { Busy }
[17292554.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17292554.768000] sda: Current: sense key: Aborted Command
[17292554.768000]     Additional sense: Scsi parity error
[17292554.768000] end_request: I/O error, dev sda, sector 11003199
[17292584.768000] ata1: command 0x35 timeout, stat 0xd0 host_stat 0x1
[17292584.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17292584.768000] ata1: status=0xd0 { Busy }
[17292584.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17292584.768000] sda: Current: sense key: Aborted Command
[17292584.768000]     Additional sense: Scsi parity error
[17292584.768000] end_request: I/O error, dev sda, sector 11003207
[17292614.768000] ata1: command 0x35 timeout, stat 0xd0 host_stat 0x1
[17292614.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17292614.768000] ata1: status=0xd0 { Busy }
[17292614.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17292614.768000] sda: Current: sense key: Aborted Command
[17292614.768000]     Additional sense: Scsi parity error
[17292614.768000] end_request: I/O error, dev sda, sector 390730237
[17292614.768000] I/O error in filesystem ("sda1") meta-data dev sda1 block 0x174a11be       ("xlog_iodone") error 5 buf count 3072
[17292614.768000] xfs_force_shutdown(sda1,0x2) called from line 882 of file fs/xfs/xfs_log.c.  Return address = 0xf9e5c909
[17292614.768000] Filesystem "sda1": Log I/O Error Detected.  Shutting down filesystem: sda1
[17292614.768000] Please umount the filesystem, and rectify the problem(s)
[17292617.912000] xfs_difree: xfs_inobt_lookup_le returned()  an error 5 on sda1.  Returning error.
[17292644.768000] ata1: command 0x35 timeout, stat 0xd0 host_stat 0x1
[17292644.768000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[17292644.768000] ata1: status=0xd0 { Busy }
[17292644.768000] sd 0:0:0:0: SCSI error: return code = 0x8000002
[17292644.768000] sda: Current: sense key: Aborted Command
[17292644.768000]     Additional sense: Scsi parity error
[17292644.768000] end_request: I/O error, dev sda, sector 63