smartctl version 5.38 [i486-slackware-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: SAMSUNG SV4002H Serial Number: 0439J1FRC89753 Firmware Version: QP100-09 User Capacity: 40,060,403,712 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 1 Local Time is: Sat Sep 19 01:36:55 2009 CDT ==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details. SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (1560) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 8) minutes. SMART Attributes Data Structure revision number: 9 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 243 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 937 5 Reallocated_Sector_Ct 0x0033 253 253 009 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0024 253 253 000 Old_age Offline - 0 9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 3683754 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 353 194 Temperature_Celsius 0x0022 148 127 000 Old_age Always - 30 197 Current_Pending_Sector 0x0033 253 253 009 Pre-fail Always - 0 198 Offline_Uncorrectable 0x0031 253 253 009 Pre-fail Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0 201 Soft_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always - 139 SMART Error Log Version: 1 Warning: ATA error count 198 inconsistent with error log pointer 1 ATA Error Count: 198 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 198 occurred at disk power-on lifetime: 30692 hours (1278 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 88 08 ff 05 e0 e0 at LBA = 0x00e005ff = 14681599 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 20 00 08 ff 05 e0 e0 00 02:14:41.000 READ SECTOR(S) 30 00 08 3f 00 00 e0 00 02:14:41.000 WRITE SECTOR(S) 30 00 08 3f 00 00 e0 00 02:14:41.000 WRITE SECTOR(S) 30 00 08 3f 00 00 e0 00 02:14:41.000 WRITE SECTOR(S) 20 00 08 ff 05 e0 e0 00 01:38:05.000 READ SECTOR(S) Error 197 occurred at disk power-on lifetime: 30692 hours (1278 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 88 08 ff 05 e0 e0 at LBA = 0x00e005ff = 14681599 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 20 00 08 ff 05 e0 e0 00 02:14:40.000 READ SECTOR(S) 30 00 08 4f 7c fe e0 00 02:14:40.000 WRITE SECTOR(S) 30 00 40 0f 7c fe e0 00 02:14:40.000 WRITE SECTOR(S) 30 00 10 8f ee 21 e1 00 02:14:40.000 WRITE SECTOR(S) 30 00 08 7f ee 21 e1 00 02:14:40.000 WRITE SECTOR(S) Error 196 occurred at disk power-on lifetime: 30692 hours (1278 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 88 08 ff 05 e0 e0 at LBA = 0x00e005ff = 14681599 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 20 00 08 ff 05 e0 e0 00 02:05:14.000 READ SECTOR(S) 30 00 08 3f 00 00 e0 00 02:05:14.000 WRITE SECTOR(S) 30 00 08 3f 00 00 e0 00 02:05:14.000 WRITE SECTOR(S) 30 00 08 3f 00 00 e0 00 02:05:14.000 WRITE SECTOR(S) 20 00 08 ff 05 e0 e0 00 49d+15:55:49.296 READ SECTOR(S) Error 195 occurred at disk power-on lifetime: 30692 hours (1278 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 88 08 ff 05 e0 e0 at LBA = 0x00e005ff = 14681599 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 20 00 08 ff 05 e0 e0 00 02:05:13.000 READ SECTOR(S) 20 00 08 0f 04 e4 e0 00 02:05:13.000 READ SECTOR(S) 20 00 08 07 04 e4 e0 00 02:05:13.000 READ SECTOR(S) 20 00 08 8f 27 23 e1 00 02:05:13.000 READ SECTOR(S) 20 00 08 77 45 23 e1 00 02:05:13.000 READ SECTOR(S) Error 194 occurred at disk power-on lifetime: 30691 hours (1278 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 88 08 ff 05 e0 e0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d5 01 01 4f c2 e0 00 08:25:58.000 SMART READ LOG b0 d1 01 01 4f c2 e0 00 08:25:58.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] b0 d0 01 00 4f c2 e0 00 08:25:58.000 SMART READ DATA 30 00 08 ef 3a fd e0 00 08:25:58.000 WRITE SECTOR(S) b0 da 00 00 4f c2 e0 00 08:25:58.000 SMART RETURN STATUS SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 30697 - Device does not support Selective Self Tests/Logging