::::::::::::::
extensions.conf
::::::::::::::
;
; Static extension configuration file, used by
; the pbx_config module. This is where you configure all your
; inbound and outbound calls in OpenPBX.
;
; This configuration file is reloaded
; - With the "extensions reload" command in the CLI
; - With the "reload" command (that reloads everything) in the CLI

;
; The "General" category is for certain variables.
;
[general]
;
; If static is set to no, or omitted, then the pbx_config will rewrite
; this file when extensions are modified.  Remember that all comments
; made in the file will be lost when that happens.
;
; XXX Not yet implemented XXX
;
static=yes
;
; if static=yes and writeprotect=no, you can save dialplan by
; CLI command 'save dialplan' too
;
writeprotect=no
;
; If autofallthrough is set, then if an extension runs out of
; things to do, it will terminate the call with BUSY, CONGESTION
; or HANGUP depending on OpenPBX's best guess (strongly recommended).
;
; If autofallthrough is not set, then if an extension runs out of
; things to do, openpbx will wait for a new extension to be dialed
; (this is the original behavior of OpenPBX 1.0 and earlier).
;
autofallthrough=yes
;
; If clearglobalvars is set, global variables will be cleared
; and reparsed on an extensions reload, or OpenPBX reload.
;
; If clearglobalvars is not set, then global variables will persist
; through reloads, and even if deleted from the extensions.conf or
; one if its included files, will remain set to the previous value.
;
clearglobalvars=no
;
; If priorityjumping is set to 'yes', then applications that support
; 'jumping' to a different priority based on the result of their operations
; will do so (this is backwards compatible behavior with pre-1.2 releases
; of OpenPBX). Individual applications can also be requested to do this
; by passing a 'j' option in their arguments.
;
priorityjumping=no
;
; You can include other config files, use the #include command
; (without the ';'). Note that this is different from the "include" command
; that includes contexts within other contexts. The #include command works
; in all openpbx configuration files.
;#include "filename.conf"

; The "Globals" category contains global variables that can be referenced
; in the dialplan with ${VARIABLE} or ${ENV(VARIABLE)} for Environmental
; variables,
; ${${VARIABLE}} or ${text${VARIABLE}} or any hybrid
;

#include extensions/allfiles.conf
::::::::::::::
extensions/allfiles.conf
::::::::::::::
#include extensions/globals.conf
#include extensions/internal.conf
#include extensions/dial-out.conf
#include extensions/macros-std.conf
#include extensions/linetests.conf
#include extensions/inbound-sip.conf
#include extensions/delayed-dial.conf
::::::::::::::
extensions/delayed-dial.conf
::::::::::::::
[delayed-dial]
exten => _X#.,1,NoOp()
exten => _X#.,n,Wait(${CUT(EXTEN,#,1)})
exten => _X#.,n,Set(NUMLIST=${EXTEN:2})
exten => _X#.,n,Set(CHANS=)
exten => _X#.,n,Goto(delayed-dial-real|${NUMLIST}|1)

[delayed-dial-real]
exten => _X.#X.,1,Set(CHANS=${CHANS}SIP/${CUT(EXTEN,#,1)}&)
exten => _X.#X.,n,Set(NUMLIST=${CUT(EXTEN,#,2-)})
exten => _X.#X.,n,Goto(${NUMLIST}|1)

include => delayed-dial-final

[delayed-dial-final]
exten => _X.,1,Set(CHANS=${CHANS}SIP/${EXTEN})
exten => _X.,n,NoOp(Dialing channels ${CHANS})
exten => _X.,n,Dial(${CHANS})
::::::::::::::
extensions/dial-out.conf
::::::::::::::
[dial-out]
exten => _9X.,1,NoOp(${CALLERID(name)} calling ${EXTEN:1})
exten => _9X.,n,Goto(dial-out-real|${EXTEN:1}|1)

[dial-out-real]
; Local number - dialled without the area code
exten => _ZXXXXXX,1,Goto(0113${EXTEN}|1)

; National number
exten => _0ZX.,1,Macro(dial-out|${EXTEN})

; International number
exten => _00ZX.,1,Macro(dial-out|${EXTEN})

; Fallback
include => dial-out-fallback

[dial-out-fallback]
; fallback - just dial the number
exten => _X.,1,Macro(dial-out|${EXTEN})

[macro-dial-out]
exten => s,1,NoOp(-- dialling number ${ARG1})
exten => s,n,Set(DC_PRE=${CUT(DIALOUT_CHAN,%,1)})
exten => s,n,Set(DC_SUF=${CUT(DIALOUT_CHAN,%,2-)})
exten => s,n,Dial(${DC_PRE}${ARG1}${DC_SUF}|${TIMEOUT_OUTBOUND}|${DOPT_OUTBOUND})
exten => s,n,Hangup()

::::::::::::::
extensions/globals.conf
::::::::::::::
[globals]
DIALEXT_CHAN=SIP/%
DIALOUT_CHAN=SIP/%@lvdx-out     ; Channel used for dial out. Macro replaces % with number to dial
DIALOUT_PREFIX=9                ; Prefix for dial out
LOCAL_NUMPAT=ZXXXXXX            ; Pattern for a local number
LOCAL_AREACODE=113              ; Area code of local area
LOCAL_COUNTRYCODE=44            ; Country code for local country
LOCAL_AREAPREFIX=0              ; Prefix for an area code
LOCAL_COUNTRYPREFIX=00          ; Prefix for a country code

; Dial Timeouts (blank for no timeout)
TIMEOUT_INTERNAL=30             ; for internal calls
TIMEOUT_INBOUND=45              ; for inbound calls
TIMEOUT_OUTBOUND=

; Dial Options
DOPT_INTERNAL=tT
DOPT_INBOUND=t
DOPT_OUTBOUND=T

; Operator numbers
OPERATORS=Local/0#202@delayed-dial&Local/10#201#203@delayed-dial&Local/20#205#206#207#208@delayed-dial
;OPERATOR_DELAY=10
OPERATOR_VMBOX=0

::::::::::::::
extensions/inbound-sip.conf
::::::::::::::
[inbound-sip]
exten => 02080358509,1,Macro(std-inbound|main-lvdx)

::::::::::::::
extensions/internal.conf
::::::::::::::
[internal]
include => internal-extensions
include => linetests
include => dial-out

[internal-extensions]
exten => _20X,1,NoOp(${CALLERID(all)} dialing extension ${EXTEN})
exten => _20X,n,Macro(std-ext|${EXTEN}|INTERNAL|1|0)
exten => _20X,n,Hangup()

exten => 0,1,Macro(std-inbound|main-lvdx)
::::::::::::::
extensions/linetests.conf
::::::::::::::
[linetests]
exten => 8001,1,Milliwatt()

::::::::::::::
extensions/macros-std.conf
::::::::::::::
[macro-std-exten]
exten => s,1,NoOp()
exten => s,n,Set(EXT=${ARG1})
exten => s,n,Set(TYPE=${ARG2})
exten => s,n,Set(DO_VM=${ARG3})
exten => s,n,Set(DELAY=${ARG4})
exten => s,n,NoOp()
exten => s,n,Wait(${DELAY})
exten => s,n,Dial(SIP/${EXT}|${TIMEOUT_${TYPE}}|${DOPT_${TYPE}})
exten => s,n,GotoIf(${DO_VM}?std-exten-vm)
exten => s,n,Hangup()
exten => s,n(std-exten-vm),NoOp()
exten => s,n,Set(VMBOX=${SIPPEER(${EXT}:mailbox)})
exten => s,n,Goto(vm_${DIALSTATUS}|1)

exten => vm_BUSY,1,Voicemail(sb${VMBOX})

include => macro-std-exten-vm-unavailable

[macro-std-exten-vm-unavailable]
exten => vm_.,1,Voicemail(su${VMBOX})

[macro-std-inbound]
exten => s,1,NoOp(Incomming call from ${CALLERID(num)} on line ${ARG1})
exten => s,n,Dial(${OPERATORS}|${TIMEOUT_INBOUND}|${DOPT_INBOUND})
exten => s,n,Voicemail(sb${OPERATOR_VMBOX})
exten => s,n,Hangup()