Sep 5 00:04:03 gripir (gripir-2741): Beenden Sep 5 00:04:04 gripir gdm[2679]: Master wird angehalten... Sep 5 00:04:05 gripir shutdown[2679]: shutting down for system halt Sep 5 00:04:12 gripir init: Switching to runlevel: 0 Sep 5 17:07:28 gripir Linux version 2.6.17-ARCH (root@Wohnung) (gcc version 4.1.1) #1 SMP PREEMPT Sat Jul 1 10:16:16 CEST 2006 Sep 5 17:07:28 gripir BIOS-provided physical RAM map: Sep 5 17:07:28 gripir BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Sep 5 17:07:28 gripir BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Sep 5 17:07:28 gripir BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Sep 5 17:07:28 gripir BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) Sep 5 17:07:28 gripir BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) Sep 5 17:07:28 gripir BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) Sep 5 17:07:28 gripir BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Sep 5 17:07:28 gripir BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Sep 5 17:07:28 gripir BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Sep 5 17:07:28 gripir 127MB HIGHMEM available. Sep 5 17:07:28 gripir 896MB LOWMEM available. Sep 5 17:07:28 gripir found SMP MP-table at 000f5570 Sep 5 17:07:28 gripir DMI 2.2 present. Sep 5 17:07:28 gripir ACPI: PM-Timer IO Port: 0x1008 Sep 5 17:07:28 gripir ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Sep 5 17:07:28 gripir Processor #0 15:4 APIC version 16 Sep 5 17:07:28 gripir ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Sep 5 17:07:28 gripir ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Sep 5 17:07:28 gripir IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 Sep 5 17:07:28 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Sep 5 17:07:28 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) Sep 5 17:07:28 gripir Enabling APIC mode: Flat. Using 1 I/O APICs Sep 5 17:07:28 gripir Using ACPI (MADT) for SMP configuration information Sep 5 17:07:28 gripir Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Sep 5 17:07:28 gripir Built 1 zonelists Sep 5 17:07:28 gripir Kernel command line: root=/dev/hda3 ro vga=773 Sep 5 17:07:28 gripir Enabling fast FPU save and restore... done. Sep 5 17:07:28 gripir Enabling unmasked SIMD FPU exception support... done. Sep 5 17:07:28 gripir Initializing CPU#0 Sep 5 17:07:28 gripir PID hash table entries: 4096 (order: 12, 16384 bytes) Sep 5 17:07:28 gripir Detected 1999.612 MHz processor. Sep 5 17:07:28 gripir Using pmtmr for high-res timesource Sep 5 17:07:28 gripir Console: colour dummy device 80x25 Sep 5 17:07:28 gripir Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Sep 5 17:07:28 gripir Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Sep 5 17:07:28 gripir Memory: 1034156k/1048512k available (2409k kernel code, 13576k reserved, 715k data, 240k init, 131008k highmem) Sep 5 17:07:28 gripir Checking if this processor honours the WP bit even in supervisor mode... Ok. Sep 5 17:07:28 gripir Calibrating delay using timer specific routine.. 4001.56 BogoMIPS (lpj=8003121) Sep 5 17:07:28 gripir Security Framework v1.0.0 initialized Sep 5 17:07:28 gripir Mount-cache hash table entries: 512 Sep 5 17:07:28 gripir CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Sep 5 17:07:28 gripir CPU: L2 Cache: 512K (64 bytes/line) Sep 5 17:07:28 gripir Intel machine check architecture supported. Sep 5 17:07:28 gripir Intel machine check reporting enabled on CPU#0. Sep 5 17:07:28 gripir Checking 'hlt' instruction... OK. Sep 5 17:07:28 gripir SMP alternatives: switching to UP code Sep 5 17:07:28 gripir Freeing SMP alternatives: 16k freed Sep 5 17:07:28 gripir checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Sep 5 17:07:28 gripir Freeing initrd memory: 840k freed Sep 5 17:07:28 gripir ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. Sep 5 17:07:28 gripir CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 0a Sep 5 17:07:28 gripir Total of 1 processors activated (4001.56 BogoMIPS). Sep 5 17:07:28 gripir ENABLING IO-APIC IRQs Sep 5 17:07:28 gripir ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Sep 5 17:07:28 gripir Brought up 1 CPUs Sep 5 17:07:28 gripir migration_cost=0 Sep 5 17:07:28 gripir NET: Registered protocol family 16 Sep 5 17:07:28 gripir ACPI: bus type pci registered Sep 5 17:07:28 gripir PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=1 Sep 5 17:07:28 gripir Setting up standard PCI resources Sep 5 17:07:28 gripir ACPI: Subsystem revision 20060127 Sep 5 17:07:28 gripir ACPI: Interpreter enabled Sep 5 17:07:28 gripir ACPI: Using IOAPIC for interrupt routing Sep 5 17:07:28 gripir ACPI: PCI Root Bridge [PCI0] (0000:00) Sep 5 17:07:28 gripir ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Sep 5 17:07:28 gripir ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) Sep 5 17:07:28 gripir ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 5 17:07:28 gripir ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. Sep 5 17:07:28 gripir ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 5 17:07:28 gripir ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 5 17:07:28 gripir ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 5 17:07:28 gripir ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Sep 5 17:07:28 gripir ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) Sep 5 17:07:28 gripir Linux Plug and Play Support v0.97 (c) Adam Belay Sep 5 17:07:28 gripir pnp: PnP ACPI init Sep 5 17:07:28 gripir pnp: PnP ACPI: found 10 devices Sep 5 17:07:28 gripir SCSI subsystem initialized Sep 5 17:07:28 gripir PCI: Using ACPI for IRQ routing Sep 5 17:07:28 gripir PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Sep 5 17:07:28 gripir PCI: Bridge: 0000:00:01.0 Sep 5 17:07:28 gripir IO window: disabled. Sep 5 17:07:28 gripir MEM window: e4000000-e5ffffff Sep 5 17:07:28 gripir PREFETCH window: d0000000-dfffffff Sep 5 17:07:28 gripir NET: Registered protocol family 2 Sep 5 17:07:28 gripir IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Sep 5 17:07:28 gripir TCP established hash table entries: 131072 (order: 8, 1572864 bytes) Sep 5 17:07:28 gripir TCP bind hash table entries: 65536 (order: 7, 786432 bytes) Sep 5 17:07:28 gripir TCP: Hash tables configured (established 131072 bind 65536) Sep 5 17:07:28 gripir TCP reno registered Sep 5 17:07:28 gripir apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) Sep 5 17:07:28 gripir apm: overridden by ACPI. Sep 5 17:07:28 gripir highmem bounce pool size: 64 pages Sep 5 17:07:28 gripir VFS: Disk quotas dquot_6.5.1 Sep 5 17:07:28 gripir Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Sep 5 17:07:28 gripir Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Sep 5 17:07:28 gripir Initializing Cryptographic API Sep 5 17:07:28 gripir io scheduler noop registered Sep 5 17:07:28 gripir io scheduler anticipatory registered (default) Sep 5 17:07:28 gripir io scheduler deadline registered Sep 5 17:07:28 gripir io scheduler cfq registered Sep 5 17:07:28 gripir vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 262144k Sep 5 17:07:28 gripir vesafb: mode is 1024x768x8, linelength=1024, pages=3 Sep 5 17:07:28 gripir vesafb: protected mode interface info at c000:e2e0 Sep 5 17:07:28 gripir vesafb: scrolling: redraw Sep 5 17:07:28 gripir vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Sep 5 17:07:28 gripir Console: switching to colour frame buffer device 128x48 Sep 5 17:07:28 gripir fb0: VESA VGA frame buffer device Sep 5 17:07:28 gripir ACPI: Power Button (FF) [PWRF] Sep 5 17:07:28 gripir ACPI: Power Button (CM) [PWRB] Sep 5 17:07:28 gripir ACPI: Sleep Button (CM) [FUTS] Sep 5 17:07:28 gripir ACPI: Fan [FAN] (on) Sep 5 17:07:28 gripir ACPI: Thermal Zone [THRM] (40 C) Sep 5 17:07:28 gripir isapnp: Scanning for PnP cards... Sep 5 17:07:28 gripir isapnp: No Plug & Play device found Sep 5 17:07:28 gripir Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled Sep 5 17:07:28 gripir serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 5 17:07:28 gripir 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 5 17:07:28 gripir Floppy drive(s): fd0 is 1.44M Sep 5 17:07:28 gripir FDC 0 is a post-1991 82077 Sep 5 17:07:28 gripir RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Sep 5 17:07:28 gripir loop: loaded (max 8 devices) Sep 5 17:07:28 gripir PNP: No PS/2 controller found. Probing ports directly. Sep 5 17:07:28 gripir serio: i8042 AUX port at 0x60,0x64 irq 12 Sep 5 17:07:28 gripir serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 5 17:07:28 gripir mice: PS/2 mouse device common for all mice Sep 5 17:07:28 gripir TCP bic registered Sep 5 17:07:28 gripir NET: Registered protocol family 1 Sep 5 17:07:28 gripir NET: Registered protocol family 17 Sep 5 17:07:28 gripir Using IPI No-Shortcut mode Sep 5 17:07:28 gripir ACPI wakeup devices: Sep 5 17:07:28 gripir FUTS PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 Sep 5 17:07:28 gripir ACPI: (supports S0 S1 S4 S5) Sep 5 17:07:28 gripir RAMDISK: Compressed image found at block 0 Sep 5 17:07:28 gripir VFS: Mounted root (ext2 filesystem). Sep 5 17:07:28 gripir Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Sep 5 17:07:28 gripir ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Sep 5 17:07:28 gripir SIS5513: IDE controller at PCI slot 0000:00:02.5 Sep 5 17:07:28 gripir SIS5513: chipset revision 1 Sep 5 17:07:28 gripir SIS5513: not 100% native mode: will probe irqs later Sep 5 17:07:28 gripir SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller Sep 5 17:07:28 gripir ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio Sep 5 17:07:28 gripir ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio Sep 5 17:07:28 gripir hda: ST340810A, ATA DISK drive Sep 5 17:07:28 gripir ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Sep 5 17:07:28 gripir hdc: CD-950E/TKU, ATAPI CD/DVD-ROM drive Sep 5 17:07:28 gripir hdd: AOPEN DUW1616/ARR, ATAPI CD/DVD-ROM drive Sep 5 17:07:28 gripir ide1 at 0x170-0x177,0x376 on irq 15 Sep 5 17:07:28 gripir hda: max request size: 128KiB Sep 5 17:07:28 gripir hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) Sep 5 17:07:28 gripir hda: cache flushes not supported Sep 5 17:07:28 gripir hda: hda1 hda2 hda3 Sep 5 17:07:28 gripir ide-floppy driver 0.99.newide Sep 5 17:07:28 gripir sata_sis 0000:00:05.0: version 0.5 Sep 5 17:07:28 gripir ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 5 17:07:28 gripir sata_sis 0000:00:05.0: Detected SiS 180/181 chipset in SATA mode Sep 5 17:07:28 gripir ata1: SATA max UDMA/133 cmd 0xE100 ctl 0xE202 bmdma 0xE500 irq 16 Sep 5 17:07:28 gripir ata2: SATA max UDMA/133 cmd 0xE300 ctl 0xE402 bmdma 0xE508 irq 16 Sep 5 17:07:28 gripir ata1: SATA link up 1.5 Gbps (SStatus 113) Sep 5 17:07:28 gripir ata1: dev 0 ATA-6, max UDMA/100, 321672960 sectors: LBA48 Sep 5 17:07:28 gripir ata1: dev 0 configured for UDMA/100 Sep 5 17:07:28 gripir scsi0 : sata_sis Sep 5 17:07:28 gripir ata2: SATA link down (SStatus 0) Sep 5 17:07:28 gripir scsi1 : sata_sis Sep 5 17:07:28 gripir Vendor: ATA Model: HDS722516VLSA80 Rev: V34O Sep 5 17:07:28 gripir Type: Direct-Access ANSI SCSI revision: 05 Sep 5 17:07:28 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 5 17:07:28 gripir sda: Write Protect is off Sep 5 17:07:28 gripir SCSI device sda: drive cache: write back Sep 5 17:07:28 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 5 17:07:28 gripir sda: Write Protect is off Sep 5 17:07:28 gripir SCSI device sda: drive cache: write back Sep 5 17:07:28 gripir sda: sda1 Sep 5 17:07:28 gripir sd 0:0:0:0: Attached scsi disk sda Sep 5 17:07:28 gripir ReiserFS: hda3: found reiserfs format "3.6" with standard journal Sep 5 17:07:28 gripir ReiserFS: hda3: using ordered data mode Sep 5 17:07:28 gripir ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Sep 5 17:07:28 gripir ReiserFS: hda3: checking transaction log (hda3) Sep 5 17:07:28 gripir ReiserFS: hda3: Using r5 hash to sort names Sep 5 17:07:28 gripir Freeing unused kernel memory: 240k freed Sep 5 17:07:28 gripir usbcore: registered new driver usbfs Sep 5 17:07:28 gripir usbcore: registered new driver hub Sep 5 17:07:28 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 5 17:07:28 gripir ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 5 17:07:28 gripir hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) Sep 5 17:07:28 gripir Uniform CD-ROM driver Revision: 3.20 Sep 5 17:07:28 gripir CSLIP: code copyright 1989 Regents of the University of California Sep 5 17:07:28 gripir PPP generic driver version 2.4.2 Sep 5 17:07:28 gripir hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Sep 5 17:07:28 gripir input: PC Speaker as /class/input/input0 Sep 5 17:07:28 gripir parport: PnPBIOS parport detected. Sep 5 17:07:28 gripir parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] Sep 5 17:07:28 gripir ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 17 Sep 5 17:07:28 gripir ohci_hcd 0000:00:03.0: OHCI Host Controller Sep 5 17:07:28 gripir ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 Sep 5 17:07:28 gripir ohci_hcd 0000:00:03.0: irq 17, io mem 0xe6024000 Sep 5 17:07:28 gripir Linux agpgart interface v0.101 (c) Dave Jones Sep 5 17:07:28 gripir usb usb1: configuration #1 chosen from 1 choice Sep 5 17:07:28 gripir hub 1-0:1.0: USB hub found Sep 5 17:07:28 gripir hub 1-0:1.0: 3 ports detected Sep 5 17:07:28 gripir ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 18 Sep 5 17:07:28 gripir ohci_hcd 0000:00:03.1: OHCI Host Controller Sep 5 17:07:28 gripir ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 Sep 5 17:07:28 gripir ohci_hcd 0000:00:03.1: irq 18, io mem 0xe6020000 Sep 5 17:07:28 gripir usb usb2: configuration #1 chosen from 1 choice Sep 5 17:07:28 gripir hub 2-0:1.0: USB hub found Sep 5 17:07:28 gripir hub 2-0:1.0: 3 ports detected Sep 5 17:07:28 gripir ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 19 Sep 5 17:07:28 gripir ohci_hcd 0000:00:03.2: OHCI Host Controller Sep 5 17:07:28 gripir ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 Sep 5 17:07:28 gripir ohci_hcd 0000:00:03.2: irq 19, io mem 0xe6021000 Sep 5 17:07:28 gripir usb usb3: configuration #1 chosen from 1 choice Sep 5 17:07:28 gripir hub 3-0:1.0: USB hub found Sep 5 17:07:28 gripir hub 3-0:1.0: 2 ports detected Sep 5 17:07:28 gripir nvidia: module license 'NVIDIA' taints kernel. Sep 5 17:07:28 gripir usb 1-1: new low speed USB device using ohci_hcd and address 2 Sep 5 17:07:28 gripir Linux video capture interface: v1.00 Sep 5 17:07:28 gripir ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20 Sep 5 17:07:28 gripir NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774 Tue Aug 1 20:54:08 PDT 2006 Sep 5 17:07:28 gripir usb 1-1: configuration #1 chosen from 1 choice Sep 5 17:07:28 gripir saa7130/34: v4l2 driver version 0.2.14 loaded Sep 5 17:07:28 gripir ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 21 Sep 5 17:07:28 gripir saa7134[0]: found at 0000:00:0d.0, rev: 1, irq: 21, latency: 32, mmio: 0xe6026000 Sep 5 17:07:28 gripir saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected] Sep 5 17:07:28 gripir saa7134[0]: board init: gpio is 0 Sep 5 17:07:28 gripir usb 2-1: new low speed USB device using ohci_hcd and address 2 Sep 5 17:07:28 gripir sis900.c: v1.08.09 Sep. 19 2005 Sep 5 17:07:28 gripir saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9 Sep 5 17:07:28 gripir saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00 Sep 5 17:07:28 gripir saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff Sep 5 17:07:28 gripir saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 5 17:07:28 gripir saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 5 17:07:28 gripir saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 5 17:07:28 gripir saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 5 17:07:28 gripir saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 5 17:07:28 gripir saa7134[0] Tuner type is 38 Sep 5 17:07:28 gripir Real Time Clock Driver v1.12ac Sep 5 17:07:28 gripir lp0: using parport0 (interrupt-driven). Sep 5 17:07:28 gripir usb 2-1: configuration #1 chosen from 1 choice Sep 5 17:07:28 gripir tuner 0-0060: All bytes are equal. It is not a TEA5767 Sep 5 17:07:28 gripir tuner 0-0060: chip found @ 0xc0 (saa7134[0]) Sep 5 17:07:28 gripir tuner 0-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) Sep 5 17:07:28 gripir pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Sep 5 17:07:28 gripir usb 3-1: new full speed USB device using ohci_hcd and address 2 Sep 5 17:07:28 gripir tda9887 0-0043: chip found @ 0x86 (saa7134[0]) Sep 5 17:07:28 gripir ppdev: user-space parallel port driver Sep 5 17:07:28 gripir usb 3-1: configuration #1 chosen from 1 choice Sep 5 17:07:28 gripir usbcore: registered new driver hiddev Sep 5 17:07:28 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 5 17:07:28 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 5 17:07:28 gripir saa7134[0]: registered device video0 [v4l2] Sep 5 17:07:28 gripir saa7134[0]: registered device vbi0 Sep 5 17:07:28 gripir saa7134[0]: registered device radio0 Sep 5 17:07:28 gripir ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 22 Sep 5 17:07:28 gripir ehci_hcd 0000:00:03.3: EHCI Host Controller Sep 5 17:07:28 gripir ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4 Sep 5 17:07:28 gripir ehci_hcd 0000:00:03.3: irq 22, io mem 0xe6022000 Sep 5 17:07:28 gripir ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Sep 5 17:07:28 gripir usb usb4: configuration #1 chosen from 1 choice Sep 5 17:07:28 gripir hub 4-0:1.0: USB hub found Sep 5 17:07:28 gripir hub 4-0:1.0: 8 ports detected Sep 5 17:07:28 gripir usb 2-1: USB disconnect, address 2 Sep 5 17:07:28 gripir ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 21 Sep 5 17:07:28 gripir 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. Sep 5 17:07:28 gripir 0000:00:04.0: Using transceiver found at address 1 as default Sep 5 17:07:28 gripir eth0: SiS 900 PCI Fast Ethernet at 0xe000, IRQ 21, 00:11:5b:4a:0d:e2. Sep 5 17:07:28 gripir agpgart: Detected AGP bridge 0 Sep 5 17:07:28 gripir agpgart: AGP aperture is 64M @ 0xe0000000 Sep 5 17:07:28 gripir gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xe800, speed 1242kHz Sep 5 17:07:28 gripir shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Sep 5 17:07:28 gripir usbcore: registered new driver usbhid Sep 5 17:07:28 gripir drivers/usb/input/hid-core.c: v2.6:USB HID core driver Sep 5 17:07:28 gripir prism2usb_init: prism2_usb.o: 0.2.3 Loaded Sep 5 17:07:28 gripir prism2usb_init: dev_info is: prism2_usb Sep 5 17:07:28 gripir usb 1-1: USB disconnect, address 2 Sep 5 17:07:28 gripir usb 1-1: new low speed USB device using ohci_hcd and address 3 Sep 5 17:07:28 gripir prism2_usb: probe of 3-1:1.0 failed with error -5 Sep 5 17:07:28 gripir usbcore: registered new driver prism2_usb Sep 5 17:07:28 gripir usb 1-1: configuration #1 chosen from 1 choice Sep 5 17:07:28 gripir input: Microsoft® Office Keyboard as /class/input/input1 Sep 5 17:07:28 gripir input: USB HID v1.10 Keyboard [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 5 17:07:28 gripir input: Microsoft® Office Keyboard as /class/input/input2 Sep 5 17:07:28 gripir input: USB HID v1.10 Device [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 5 17:07:28 gripir usb 3-1: USB disconnect, address 2 Sep 5 17:07:28 gripir usb 3-1: new full speed USB device using ohci_hcd and address 3 Sep 5 17:07:28 gripir NTFS driver 2.1.27 [Flags: R/W MODULE]. Sep 5 17:07:28 gripir usb 3-1: configuration #1 chosen from 1 choice Sep 5 17:07:28 gripir NTFS volume version 3.1. Sep 5 17:07:28 gripir usb 3-1: reset full speed USB device using ohci_hcd and address 3 Sep 5 17:07:28 gripir kjournald starting. Commit interval 5 seconds Sep 5 17:07:28 gripir EXT3 FS on sda1, internal journal Sep 5 17:07:28 gripir EXT3-fs: mounted filesystem with ordered data mode. Sep 5 17:07:28 gripir Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 across:498004k Sep 5 17:07:28 gripir ohci_hcd 0000:00:03.1: wakeup Sep 5 17:07:28 gripir usb 2-1: new low speed USB device using ohci_hcd and address 3 Sep 5 17:07:28 gripir usb 2-1: configuration #1 chosen from 1 choice Sep 5 17:07:28 gripir input: Logitech USB-PS/2 Optical Mouse as /class/input/input3 Sep 5 17:07:28 gripir input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.1-1 Sep 5 17:07:28 gripir ident: nic h/w: id=0x8026 1.0.0 Sep 5 17:07:28 gripir ident: pri f/w: id=0x15 1.1.3 Sep 5 17:07:28 gripir ident: sta f/w: id=0x1f 1.7.1 Sep 5 17:07:28 gripir MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1 Sep 5 17:07:28 gripir CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1 Sep 5 17:07:28 gripir PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/4 Sep 5 17:07:28 gripir STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/12 Sep 5 17:07:28 gripir PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 5 17:07:28 gripir STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 5 17:07:28 gripir STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1 Sep 5 17:07:28 gripir Prism2 card SN: 000000000000 Sep 5 17:07:29 gripir linkstatus=CONNECTED Sep 5 17:07:39 gripir NVRM: not using NVAGP, an AGPGART backend is loaded! Sep 5 17:07:53 gripir (gripir-2855): (Version 2.14.0) wird gestartet, Prozesskennung 2855, Benutzer »gripir« Sep 5 17:07:53 gripir (gripir-2855): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 5 17:07:53 gripir (gripir-2855): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 5 17:07:53 gripir (gripir-2855): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 5 17:08:01 gripir (gripir-2855): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 0 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 5 17:08:11 gripir NET: Registered protocol family 10 Sep 5 17:08:11 gripir lo: Disabled Privacy Extensions Sep 5 17:08:11 gripir IPv6 over IPv4 tunneling driver Sep 5 17:30:20 gripir usb 1-2: new full speed USB device using ohci_hcd and address 4 Sep 5 17:30:20 gripir usb 1-2: configuration #1 chosen from 1 choice Sep 5 17:30:20 gripir Initializing USB Mass Storage driver... Sep 5 17:30:20 gripir scsi2 : SCSI emulation for USB Mass Storage devices Sep 5 17:30:20 gripir usbcore: registered new driver usb-storage Sep 5 17:30:20 gripir USB Mass Storage support registered. Sep 5 17:30:25 gripir Vendor: OLYMPUS Model: FE130/X720 Rev: 1.00 Sep 5 17:30:25 gripir Type: Direct-Access ANSI SCSI revision: 02 Sep 5 17:30:25 gripir SCSI device sdb: 1023120 512-byte hdwr sectors (524 MB) Sep 5 17:30:25 gripir sdb: Write Protect is off Sep 5 17:30:25 gripir SCSI device sdb: 1023120 512-byte hdwr sectors (524 MB) Sep 5 17:30:25 gripir sdb: Write Protect is off Sep 5 17:30:25 gripir sdb: sdb1 Sep 5 17:30:25 gripir sd 2:0:0:0: Attached scsi removable disk sdb Sep 5 18:10:23 gripir usb 1-2: USB disconnect, address 4 Sep 5 18:12:55 gripir (gripir-2855): Beenden Sep 5 18:12:55 gripir gdm[2793]: Master wird angehalten... Sep 5 18:12:56 gripir shutdown[2793]: shutting down for system halt Sep 5 18:12:56 gripir init: Switching to runlevel: 0 Sep 5 21:12:14 gripir Linux version 2.6.17-ARCH (root@Wohnung) (gcc version 4.1.1) #1 SMP PREEMPT Sat Jul 1 10:16:16 CEST 2006 Sep 5 21:12:14 gripir BIOS-provided physical RAM map: Sep 5 21:12:14 gripir BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Sep 5 21:12:14 gripir BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Sep 5 21:12:14 gripir BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Sep 5 21:12:14 gripir BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) Sep 5 21:12:14 gripir BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) Sep 5 21:12:14 gripir BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) Sep 5 21:12:14 gripir BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Sep 5 21:12:14 gripir BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Sep 5 21:12:14 gripir BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Sep 5 21:12:14 gripir 127MB HIGHMEM available. Sep 5 21:12:14 gripir 896MB LOWMEM available. Sep 5 21:12:14 gripir found SMP MP-table at 000f5570 Sep 5 21:12:14 gripir DMI 2.2 present. Sep 5 21:12:14 gripir ACPI: PM-Timer IO Port: 0x1008 Sep 5 21:12:14 gripir ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Sep 5 21:12:14 gripir Processor #0 15:4 APIC version 16 Sep 5 21:12:14 gripir ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Sep 5 21:12:14 gripir ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Sep 5 21:12:14 gripir IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 Sep 5 21:12:14 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Sep 5 21:12:14 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) Sep 5 21:12:14 gripir Enabling APIC mode: Flat. Using 1 I/O APICs Sep 5 21:12:14 gripir Using ACPI (MADT) for SMP configuration information Sep 5 21:12:14 gripir Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Sep 5 21:12:14 gripir Built 1 zonelists Sep 5 21:12:14 gripir Kernel command line: root=/dev/hda3 ro vga=773 Sep 5 21:12:14 gripir Enabling fast FPU save and restore... done. Sep 5 21:12:14 gripir Enabling unmasked SIMD FPU exception support... done. Sep 5 21:12:14 gripir Initializing CPU#0 Sep 5 21:12:14 gripir PID hash table entries: 4096 (order: 12, 16384 bytes) Sep 5 21:12:14 gripir Detected 1999.621 MHz processor. Sep 5 21:12:14 gripir Using pmtmr for high-res timesource Sep 5 21:12:14 gripir Console: colour dummy device 80x25 Sep 5 21:12:14 gripir Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Sep 5 21:12:14 gripir Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Sep 5 21:12:14 gripir Memory: 1034156k/1048512k available (2409k kernel code, 13576k reserved, 715k data, 240k init, 131008k highmem) Sep 5 21:12:14 gripir Checking if this processor honours the WP bit even in supervisor mode... Ok. Sep 5 21:12:14 gripir Calibrating delay using timer specific routine.. 4001.51 BogoMIPS (lpj=8003037) Sep 5 21:12:14 gripir Security Framework v1.0.0 initialized Sep 5 21:12:14 gripir Mount-cache hash table entries: 512 Sep 5 21:12:14 gripir CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Sep 5 21:12:14 gripir CPU: L2 Cache: 512K (64 bytes/line) Sep 5 21:12:14 gripir Intel machine check architecture supported. Sep 5 21:12:14 gripir Intel machine check reporting enabled on CPU#0. Sep 5 21:12:14 gripir Checking 'hlt' instruction... OK. Sep 5 21:12:14 gripir SMP alternatives: switching to UP code Sep 5 21:12:14 gripir Freeing SMP alternatives: 16k freed Sep 5 21:12:14 gripir checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Sep 5 21:12:14 gripir Freeing initrd memory: 840k freed Sep 5 21:12:14 gripir ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. Sep 5 21:12:14 gripir CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 0a Sep 5 21:12:14 gripir Total of 1 processors activated (4001.51 BogoMIPS). Sep 5 21:12:14 gripir ENABLING IO-APIC IRQs Sep 5 21:12:14 gripir ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Sep 5 21:12:14 gripir Brought up 1 CPUs Sep 5 21:12:14 gripir migration_cost=0 Sep 5 21:12:14 gripir NET: Registered protocol family 16 Sep 5 21:12:14 gripir ACPI: bus type pci registered Sep 5 21:12:14 gripir PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=1 Sep 5 21:12:14 gripir Setting up standard PCI resources Sep 5 21:12:14 gripir ACPI: Subsystem revision 20060127 Sep 5 21:12:14 gripir ACPI: Interpreter enabled Sep 5 21:12:14 gripir ACPI: Using IOAPIC for interrupt routing Sep 5 21:12:14 gripir ACPI: PCI Root Bridge [PCI0] (0000:00) Sep 5 21:12:14 gripir ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Sep 5 21:12:14 gripir ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) Sep 5 21:12:14 gripir ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 5 21:12:14 gripir ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. Sep 5 21:12:14 gripir ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 5 21:12:14 gripir ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 5 21:12:14 gripir ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 5 21:12:14 gripir ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Sep 5 21:12:14 gripir ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) Sep 5 21:12:14 gripir Linux Plug and Play Support v0.97 (c) Adam Belay Sep 5 21:12:14 gripir pnp: PnP ACPI init Sep 5 21:12:14 gripir pnp: PnP ACPI: found 10 devices Sep 5 21:12:14 gripir SCSI subsystem initialized Sep 5 21:12:14 gripir PCI: Using ACPI for IRQ routing Sep 5 21:12:14 gripir PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Sep 5 21:12:14 gripir PCI: Bridge: 0000:00:01.0 Sep 5 21:12:14 gripir IO window: disabled. Sep 5 21:12:14 gripir MEM window: e4000000-e5ffffff Sep 5 21:12:14 gripir PREFETCH window: d0000000-dfffffff Sep 5 21:12:14 gripir NET: Registered protocol family 2 Sep 5 21:12:14 gripir IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Sep 5 21:12:14 gripir TCP established hash table entries: 131072 (order: 8, 1572864 bytes) Sep 5 21:12:14 gripir TCP bind hash table entries: 65536 (order: 7, 786432 bytes) Sep 5 21:12:14 gripir TCP: Hash tables configured (established 131072 bind 65536) Sep 5 21:12:14 gripir TCP reno registered Sep 5 21:12:14 gripir apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) Sep 5 21:12:14 gripir apm: overridden by ACPI. Sep 5 21:12:14 gripir highmem bounce pool size: 64 pages Sep 5 21:12:14 gripir VFS: Disk quotas dquot_6.5.1 Sep 5 21:12:14 gripir Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Sep 5 21:12:14 gripir Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Sep 5 21:12:14 gripir Initializing Cryptographic API Sep 5 21:12:14 gripir io scheduler noop registered Sep 5 21:12:14 gripir io scheduler anticipatory registered (default) Sep 5 21:12:14 gripir io scheduler deadline registered Sep 5 21:12:14 gripir io scheduler cfq registered Sep 5 21:12:14 gripir vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 262144k Sep 5 21:12:14 gripir vesafb: mode is 1024x768x8, linelength=1024, pages=3 Sep 5 21:12:14 gripir vesafb: protected mode interface info at c000:e2e0 Sep 5 21:12:14 gripir vesafb: scrolling: redraw Sep 5 21:12:14 gripir vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Sep 5 21:12:14 gripir Console: switching to colour frame buffer device 128x48 Sep 5 21:12:14 gripir fb0: VESA VGA frame buffer device Sep 5 21:12:14 gripir ACPI: Power Button (FF) [PWRF] Sep 5 21:12:14 gripir ACPI: Power Button (CM) [PWRB] Sep 5 21:12:14 gripir ACPI: Sleep Button (CM) [FUTS] Sep 5 21:12:14 gripir ACPI: Fan [FAN] (on) Sep 5 21:12:14 gripir ACPI: Thermal Zone [THRM] (40 C) Sep 5 21:12:14 gripir isapnp: Scanning for PnP cards... Sep 5 21:12:14 gripir isapnp: No Plug & Play device found Sep 5 21:12:14 gripir Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled Sep 5 21:12:14 gripir serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 5 21:12:14 gripir 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 5 21:12:14 gripir Floppy drive(s): fd0 is 1.44M Sep 5 21:12:14 gripir FDC 0 is a post-1991 82077 Sep 5 21:12:14 gripir RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Sep 5 21:12:14 gripir loop: loaded (max 8 devices) Sep 5 21:12:14 gripir PNP: No PS/2 controller found. Probing ports directly. Sep 5 21:12:14 gripir serio: i8042 AUX port at 0x60,0x64 irq 12 Sep 5 21:12:14 gripir serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 5 21:12:14 gripir mice: PS/2 mouse device common for all mice Sep 5 21:12:14 gripir TCP bic registered Sep 5 21:12:14 gripir NET: Registered protocol family 1 Sep 5 21:12:14 gripir NET: Registered protocol family 17 Sep 5 21:12:14 gripir Using IPI No-Shortcut mode Sep 5 21:12:14 gripir ACPI wakeup devices: Sep 5 21:12:14 gripir FUTS PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 Sep 5 21:12:14 gripir ACPI: (supports S0 S1 S4 S5) Sep 5 21:12:14 gripir RAMDISK: Compressed image found at block 0 Sep 5 21:12:14 gripir VFS: Mounted root (ext2 filesystem). Sep 5 21:12:14 gripir Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Sep 5 21:12:14 gripir ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Sep 5 21:12:14 gripir SIS5513: IDE controller at PCI slot 0000:00:02.5 Sep 5 21:12:14 gripir SIS5513: chipset revision 1 Sep 5 21:12:14 gripir SIS5513: not 100% native mode: will probe irqs later Sep 5 21:12:14 gripir SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller Sep 5 21:12:14 gripir ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio Sep 5 21:12:14 gripir ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio Sep 5 21:12:14 gripir hda: ST340810A, ATA DISK drive Sep 5 21:12:14 gripir ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Sep 5 21:12:14 gripir hdc: CD-950E/TKU, ATAPI CD/DVD-ROM drive Sep 5 21:12:14 gripir hdd: AOPEN DUW1616/ARR, ATAPI CD/DVD-ROM drive Sep 5 21:12:14 gripir ide1 at 0x170-0x177,0x376 on irq 15 Sep 5 21:12:14 gripir hda: max request size: 128KiB Sep 5 21:12:14 gripir hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) Sep 5 21:12:14 gripir hda: cache flushes not supported Sep 5 21:12:14 gripir hda: hda1 hda2 hda3 Sep 5 21:12:14 gripir ide-floppy driver 0.99.newide Sep 5 21:12:14 gripir sata_sis 0000:00:05.0: version 0.5 Sep 5 21:12:14 gripir ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 5 21:12:14 gripir sata_sis 0000:00:05.0: Detected SiS 180/181 chipset in SATA mode Sep 5 21:12:14 gripir ata1: SATA max UDMA/133 cmd 0xE100 ctl 0xE202 bmdma 0xE500 irq 16 Sep 5 21:12:14 gripir ata2: SATA max UDMA/133 cmd 0xE300 ctl 0xE402 bmdma 0xE508 irq 16 Sep 5 21:12:14 gripir ata1: SATA link up 1.5 Gbps (SStatus 113) Sep 5 21:12:14 gripir ata1: dev 0 ATA-6, max UDMA/100, 321672960 sectors: LBA48 Sep 5 21:12:14 gripir ata1: dev 0 configured for UDMA/100 Sep 5 21:12:14 gripir scsi0 : sata_sis Sep 5 21:12:14 gripir ata2: SATA link down (SStatus 0) Sep 5 21:12:14 gripir scsi1 : sata_sis Sep 5 21:12:14 gripir Vendor: ATA Model: HDS722516VLSA80 Rev: V34O Sep 5 21:12:14 gripir Type: Direct-Access ANSI SCSI revision: 05 Sep 5 21:12:14 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 5 21:12:14 gripir sda: Write Protect is off Sep 5 21:12:14 gripir SCSI device sda: drive cache: write back Sep 5 21:12:14 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 5 21:12:14 gripir sda: Write Protect is off Sep 5 21:12:14 gripir SCSI device sda: drive cache: write back Sep 5 21:12:14 gripir sda: sda1 Sep 5 21:12:14 gripir sd 0:0:0:0: Attached scsi disk sda Sep 5 21:12:14 gripir ReiserFS: hda3: found reiserfs format "3.6" with standard journal Sep 5 21:12:14 gripir ReiserFS: hda3: using ordered data mode Sep 5 21:12:14 gripir ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Sep 5 21:12:14 gripir ReiserFS: hda3: checking transaction log (hda3) Sep 5 21:12:14 gripir ReiserFS: hda3: Using r5 hash to sort names Sep 5 21:12:14 gripir Freeing unused kernel memory: 240k freed Sep 5 21:12:14 gripir usbcore: registered new driver usbfs Sep 5 21:12:14 gripir usbcore: registered new driver hub Sep 5 21:12:14 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 5 21:12:14 gripir ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 5 21:12:14 gripir input: PC Speaker as /class/input/input0 Sep 5 21:12:14 gripir parport: PnPBIOS parport detected. Sep 5 21:12:14 gripir parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] Sep 5 21:12:14 gripir hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) Sep 5 21:12:14 gripir Uniform CD-ROM driver Revision: 3.20 Sep 5 21:12:14 gripir hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Sep 5 21:12:14 gripir gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xe800, speed 1242kHz Sep 5 21:12:14 gripir CSLIP: code copyright 1989 Regents of the University of California Sep 5 21:12:14 gripir PPP generic driver version 2.4.2 Sep 5 21:12:14 gripir ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 17 Sep 5 21:12:14 gripir ohci_hcd 0000:00:03.0: OHCI Host Controller Sep 5 21:12:14 gripir ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 Sep 5 21:12:14 gripir ohci_hcd 0000:00:03.0: irq 17, io mem 0xe6024000 Sep 5 21:12:14 gripir usb usb1: configuration #1 chosen from 1 choice Sep 5 21:12:14 gripir hub 1-0:1.0: USB hub found Sep 5 21:12:14 gripir hub 1-0:1.0: 3 ports detected Sep 5 21:12:14 gripir ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 18 Sep 5 21:12:14 gripir ohci_hcd 0000:00:03.1: OHCI Host Controller Sep 5 21:12:14 gripir ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 Sep 5 21:12:14 gripir ohci_hcd 0000:00:03.1: irq 18, io mem 0xe6020000 Sep 5 21:12:14 gripir usb usb2: configuration #1 chosen from 1 choice Sep 5 21:12:14 gripir hub 2-0:1.0: USB hub found Sep 5 21:12:14 gripir hub 2-0:1.0: 3 ports detected Sep 5 21:12:14 gripir ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 19 Sep 5 21:12:14 gripir ohci_hcd 0000:00:03.2: OHCI Host Controller Sep 5 21:12:14 gripir ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 Sep 5 21:12:14 gripir ohci_hcd 0000:00:03.2: irq 19, io mem 0xe6021000 Sep 5 21:12:14 gripir usb usb3: configuration #1 chosen from 1 choice Sep 5 21:12:14 gripir hub 3-0:1.0: USB hub found Sep 5 21:12:14 gripir hub 3-0:1.0: 2 ports detected Sep 5 21:12:14 gripir usb 1-1: new low speed USB device using ohci_hcd and address 2 Sep 5 21:12:14 gripir ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 20 Sep 5 21:12:14 gripir ehci_hcd 0000:00:03.3: EHCI Host Controller Sep 5 21:12:14 gripir ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4 Sep 5 21:12:14 gripir ehci_hcd 0000:00:03.3: irq 20, io mem 0xe6022000 Sep 5 21:12:14 gripir ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Sep 5 21:12:14 gripir usb usb4: configuration #1 chosen from 1 choice Sep 5 21:12:14 gripir hub 4-0:1.0: USB hub found Sep 5 21:12:14 gripir hub 4-0:1.0: 8 ports detected Sep 5 21:12:14 gripir Linux agpgart interface v0.101 (c) Dave Jones Sep 5 21:12:14 gripir nvidia: module license 'NVIDIA' taints kernel. Sep 5 21:12:14 gripir ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21 Sep 5 21:12:14 gripir NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774 Tue Aug 1 20:54:08 PDT 2006 Sep 5 21:12:14 gripir sis900.c: v1.08.09 Sep. 19 2005 Sep 5 21:12:14 gripir ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 22 Sep 5 21:12:14 gripir 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. Sep 5 21:12:14 gripir 0000:00:04.0: Using transceiver found at address 1 as default Sep 5 21:12:14 gripir eth0: SiS 900 PCI Fast Ethernet at 0xe000, IRQ 22, 00:11:5b:4a:0d:e2. Sep 5 21:12:14 gripir Real Time Clock Driver v1.12ac Sep 5 21:12:14 gripir lp0: using parport0 (interrupt-driven). Sep 5 21:12:14 gripir agpgart: Detected AGP bridge 0 Sep 5 21:12:14 gripir agpgart: AGP aperture is 64M @ 0xe0000000 Sep 5 21:12:14 gripir ohci_hcd 0000:00:03.0: wakeup Sep 5 21:12:14 gripir Linux video capture interface: v1.00 Sep 5 21:12:14 gripir ohci_hcd 0000:00:03.1: wakeup Sep 5 21:12:14 gripir ohci_hcd 0000:00:03.2: wakeup Sep 5 21:12:14 gripir saa7130/34: v4l2 driver version 0.2.14 loaded Sep 5 21:12:14 gripir ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 22 Sep 5 21:12:14 gripir saa7134[0]: found at 0000:00:0d.0, rev: 1, irq: 22, latency: 32, mmio: 0xe6026000 Sep 5 21:12:14 gripir saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected] Sep 5 21:12:14 gripir saa7134[0]: board init: gpio is 0 Sep 5 21:12:14 gripir ppdev: user-space parallel port driver Sep 5 21:12:14 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 5 21:12:14 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 5 21:12:14 gripir pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Sep 5 21:12:14 gripir saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9 Sep 5 21:12:14 gripir saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00 Sep 5 21:12:14 gripir saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff Sep 5 21:12:14 gripir saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 5 21:12:14 gripir saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 5 21:12:14 gripir saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 5 21:12:14 gripir saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 5 21:12:14 gripir saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 5 21:12:14 gripir saa7134[0] Tuner type is 38 Sep 5 21:12:14 gripir usb 1-1: new low speed USB device using ohci_hcd and address 3 Sep 5 21:12:14 gripir tuner 0-0060: All bytes are equal. It is not a TEA5767 Sep 5 21:12:14 gripir tuner 0-0060: chip found @ 0xc0 (saa7134[0]) Sep 5 21:12:14 gripir tuner 0-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) Sep 5 21:12:14 gripir usb 1-1: configuration #1 chosen from 1 choice Sep 5 21:12:14 gripir tda9887 0-0043: chip found @ 0x86 (saa7134[0]) Sep 5 21:12:14 gripir saa7134[0]: registered device video0 [v4l2] Sep 5 21:12:14 gripir saa7134[0]: registered device vbi0 Sep 5 21:12:14 gripir saa7134[0]: registered device radio0 Sep 5 21:12:14 gripir shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Sep 5 21:12:14 gripir usb 2-1: new low speed USB device using ohci_hcd and address 2 Sep 5 21:12:14 gripir usb 2-1: configuration #1 chosen from 1 choice Sep 5 21:12:14 gripir usb 3-1: new full speed USB device using ohci_hcd and address 2 Sep 5 21:12:14 gripir usb 3-1: configuration #1 chosen from 1 choice Sep 5 21:12:14 gripir usbcore: registered new driver hiddev Sep 5 21:12:14 gripir input: Microsoft® Office Keyboard as /class/input/input1 Sep 5 21:12:14 gripir input: USB HID v1.10 Keyboard [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 5 21:12:14 gripir input: Microsoft® Office Keyboard as /class/input/input2 Sep 5 21:12:14 gripir input: USB HID v1.10 Device [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 5 21:12:14 gripir input: Logitech USB-PS/2 Optical Mouse as /class/input/input3 Sep 5 21:12:14 gripir input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.1-1 Sep 5 21:12:14 gripir usbcore: registered new driver usbhid Sep 5 21:12:14 gripir drivers/usb/input/hid-core.c: v2.6:USB HID core driver Sep 5 21:12:14 gripir prism2usb_init: prism2_usb.o: 0.2.3 Loaded Sep 5 21:12:14 gripir prism2usb_init: dev_info is: prism2_usb Sep 5 21:12:14 gripir usb 3-1: reset full speed USB device using ohci_hcd and address 2 Sep 5 21:12:14 gripir usbcore: registered new driver prism2_usb Sep 5 21:12:14 gripir NTFS driver 2.1.27 [Flags: R/W MODULE]. Sep 5 21:12:14 gripir NTFS volume version 3.1. Sep 5 21:12:14 gripir kjournald starting. Commit interval 5 seconds Sep 5 21:12:14 gripir EXT3 FS on sda1, internal journal Sep 5 21:12:14 gripir EXT3-fs: mounted filesystem with ordered data mode. Sep 5 21:12:14 gripir Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 across:498004k Sep 5 21:12:15 gripir ident: nic h/w: id=0x8026 1.0.0 Sep 5 21:12:15 gripir ident: pri f/w: id=0x15 1.1.3 Sep 5 21:12:15 gripir ident: sta f/w: id=0x1f 1.7.1 Sep 5 21:12:15 gripir MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1 Sep 5 21:12:15 gripir CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1 Sep 5 21:12:15 gripir PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/4 Sep 5 21:12:15 gripir STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/12 Sep 5 21:12:15 gripir PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 5 21:12:15 gripir STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 5 21:12:15 gripir STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1 Sep 5 21:12:15 gripir Prism2 card SN: 000000000000 Sep 5 21:12:16 gripir linkstatus=CONNECTED Sep 5 21:12:25 gripir NVRM: not using NVAGP, an AGPGART backend is loaded! Sep 5 21:12:45 gripir (gripir-2744): (Version 2.14.0) wird gestartet, Prozesskennung 2744, Benutzer »gripir« Sep 5 21:12:45 gripir (gripir-2744): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 5 21:12:45 gripir (gripir-2744): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 5 21:12:45 gripir (gripir-2744): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 5 21:12:52 gripir (gripir-2744): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 0 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 5 21:12:59 gripir NET: Registered protocol family 10 Sep 5 21:12:59 gripir lo: Disabled Privacy Extensions Sep 5 21:12:59 gripir IPv6 over IPv4 tunneling driver Sep 5 21:22:53 gripir usb 1-2: new full speed USB device using ohci_hcd and address 4 Sep 5 21:22:53 gripir usb 1-2: configuration #1 chosen from 1 choice Sep 5 21:22:53 gripir Initializing USB Mass Storage driver... Sep 5 21:22:53 gripir scsi2 : SCSI emulation for USB Mass Storage devices Sep 5 21:22:53 gripir usbcore: registered new driver usb-storage Sep 5 21:22:53 gripir USB Mass Storage support registered. Sep 5 21:22:58 gripir Vendor: OLYMPUS Model: FE130/X720 Rev: 1.00 Sep 5 21:22:58 gripir Type: Direct-Access ANSI SCSI revision: 02 Sep 5 21:22:58 gripir SCSI device sdb: 1023120 512-byte hdwr sectors (524 MB) Sep 5 21:22:58 gripir sdb: Write Protect is off Sep 5 21:22:58 gripir SCSI device sdb: 1023120 512-byte hdwr sectors (524 MB) Sep 5 21:22:58 gripir sdb: Write Protect is off Sep 5 21:22:58 gripir sdb: sdb1 Sep 5 21:22:58 gripir sd 2:0:0:0: Attached scsi removable disk sdb Sep 5 21:31:50 gripir usb 1-2: USB disconnect, address 4 Sep 5 22:13:00 gripir (gripir-2744): Beenden Sep 5 22:13:00 gripir gdm[2682]: Master wird angehalten... Sep 5 22:13:00 gripir shutdown[2682]: shutting down for system halt Sep 5 22:13:01 gripir init: Switching to runlevel: 0 Sep 6 17:08:16 gripir Linux version 2.6.17-ARCH (root@Wohnung) (gcc version 4.1.1) #1 SMP PREEMPT Sat Jul 1 10:16:16 CEST 2006 Sep 6 17:08:17 gripir BIOS-provided physical RAM map: Sep 6 17:08:17 gripir BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Sep 6 17:08:17 gripir BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Sep 6 17:08:17 gripir BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Sep 6 17:08:17 gripir BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) Sep 6 17:08:17 gripir BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) Sep 6 17:08:17 gripir BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) Sep 6 17:08:17 gripir BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Sep 6 17:08:17 gripir BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Sep 6 17:08:17 gripir BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Sep 6 17:08:17 gripir 127MB HIGHMEM available. Sep 6 17:08:17 gripir 896MB LOWMEM available. Sep 6 17:08:17 gripir found SMP MP-table at 000f5570 Sep 6 17:08:17 gripir DMI 2.2 present. Sep 6 17:08:17 gripir ACPI: PM-Timer IO Port: 0x1008 Sep 6 17:08:17 gripir ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Sep 6 17:08:17 gripir Processor #0 15:4 APIC version 16 Sep 6 17:08:17 gripir ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Sep 6 17:08:17 gripir ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Sep 6 17:08:17 gripir IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 Sep 6 17:08:17 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Sep 6 17:08:17 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) Sep 6 17:08:17 gripir Enabling APIC mode: Flat. Using 1 I/O APICs Sep 6 17:08:17 gripir Using ACPI (MADT) for SMP configuration information Sep 6 17:08:17 gripir Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Sep 6 17:08:17 gripir Built 1 zonelists Sep 6 17:08:17 gripir Kernel command line: root=/dev/hda3 ro vga=773 Sep 6 17:08:17 gripir Enabling fast FPU save and restore... done. Sep 6 17:08:17 gripir Enabling unmasked SIMD FPU exception support... done. Sep 6 17:08:17 gripir Initializing CPU#0 Sep 6 17:08:17 gripir PID hash table entries: 4096 (order: 12, 16384 bytes) Sep 6 17:08:17 gripir Detected 1999.621 MHz processor. Sep 6 17:08:17 gripir Using pmtmr for high-res timesource Sep 6 17:08:17 gripir Console: colour dummy device 80x25 Sep 6 17:08:17 gripir Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Sep 6 17:08:17 gripir Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Sep 6 17:08:17 gripir Memory: 1034156k/1048512k available (2409k kernel code, 13576k reserved, 715k data, 240k init, 131008k highmem) Sep 6 17:08:17 gripir Checking if this processor honours the WP bit even in supervisor mode... Ok. Sep 6 17:08:17 gripir Calibrating delay using timer specific routine.. 4001.52 BogoMIPS (lpj=8003042) Sep 6 17:08:17 gripir Security Framework v1.0.0 initialized Sep 6 17:08:17 gripir Mount-cache hash table entries: 512 Sep 6 17:08:17 gripir CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Sep 6 17:08:17 gripir CPU: L2 Cache: 512K (64 bytes/line) Sep 6 17:08:17 gripir Intel machine check architecture supported. Sep 6 17:08:17 gripir Intel machine check reporting enabled on CPU#0. Sep 6 17:08:17 gripir Checking 'hlt' instruction... OK. Sep 6 17:08:17 gripir SMP alternatives: switching to UP code Sep 6 17:08:17 gripir Freeing SMP alternatives: 16k freed Sep 6 17:08:17 gripir checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Sep 6 17:08:17 gripir Freeing initrd memory: 840k freed Sep 6 17:08:17 gripir ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. Sep 6 17:08:17 gripir CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 0a Sep 6 17:08:17 gripir Total of 1 processors activated (4001.52 BogoMIPS). Sep 6 17:08:17 gripir ENABLING IO-APIC IRQs Sep 6 17:08:17 gripir ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Sep 6 17:08:17 gripir Brought up 1 CPUs Sep 6 17:08:17 gripir migration_cost=0 Sep 6 17:08:17 gripir NET: Registered protocol family 16 Sep 6 17:08:17 gripir ACPI: bus type pci registered Sep 6 17:08:17 gripir PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=1 Sep 6 17:08:17 gripir Setting up standard PCI resources Sep 6 17:08:17 gripir ACPI: Subsystem revision 20060127 Sep 6 17:08:17 gripir ACPI: Interpreter enabled Sep 6 17:08:17 gripir ACPI: Using IOAPIC for interrupt routing Sep 6 17:08:17 gripir ACPI: PCI Root Bridge [PCI0] (0000:00) Sep 6 17:08:17 gripir ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Sep 6 17:08:17 gripir ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) Sep 6 17:08:17 gripir ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 6 17:08:17 gripir ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. Sep 6 17:08:17 gripir ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 6 17:08:17 gripir ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 6 17:08:17 gripir ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 6 17:08:17 gripir ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Sep 6 17:08:17 gripir ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) Sep 6 17:08:17 gripir Linux Plug and Play Support v0.97 (c) Adam Belay Sep 6 17:08:17 gripir pnp: PnP ACPI init Sep 6 17:08:17 gripir pnp: PnP ACPI: found 10 devices Sep 6 17:08:17 gripir SCSI subsystem initialized Sep 6 17:08:17 gripir PCI: Using ACPI for IRQ routing Sep 6 17:08:17 gripir PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Sep 6 17:08:17 gripir PCI: Bridge: 0000:00:01.0 Sep 6 17:08:17 gripir IO window: disabled. Sep 6 17:08:17 gripir MEM window: e4000000-e5ffffff Sep 6 17:08:17 gripir PREFETCH window: d0000000-dfffffff Sep 6 17:08:17 gripir NET: Registered protocol family 2 Sep 6 17:08:17 gripir IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Sep 6 17:08:17 gripir TCP established hash table entries: 131072 (order: 8, 1572864 bytes) Sep 6 17:08:17 gripir TCP bind hash table entries: 65536 (order: 7, 786432 bytes) Sep 6 17:08:17 gripir TCP: Hash tables configured (established 131072 bind 65536) Sep 6 17:08:17 gripir TCP reno registered Sep 6 17:08:17 gripir apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) Sep 6 17:08:17 gripir apm: overridden by ACPI. Sep 6 17:08:17 gripir highmem bounce pool size: 64 pages Sep 6 17:08:17 gripir VFS: Disk quotas dquot_6.5.1 Sep 6 17:08:17 gripir Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Sep 6 17:08:17 gripir Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Sep 6 17:08:17 gripir Initializing Cryptographic API Sep 6 17:08:17 gripir io scheduler noop registered Sep 6 17:08:17 gripir io scheduler anticipatory registered (default) Sep 6 17:08:17 gripir io scheduler deadline registered Sep 6 17:08:17 gripir io scheduler cfq registered Sep 6 17:08:17 gripir vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 262144k Sep 6 17:08:17 gripir vesafb: mode is 1024x768x8, linelength=1024, pages=3 Sep 6 17:08:17 gripir vesafb: protected mode interface info at c000:e2e0 Sep 6 17:08:17 gripir vesafb: scrolling: redraw Sep 6 17:08:17 gripir vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Sep 6 17:08:17 gripir Console: switching to colour frame buffer device 128x48 Sep 6 17:08:17 gripir fb0: VESA VGA frame buffer device Sep 6 17:08:17 gripir ACPI: Power Button (FF) [PWRF] Sep 6 17:08:17 gripir ACPI: Power Button (CM) [PWRB] Sep 6 17:08:17 gripir ACPI: Sleep Button (CM) [FUTS] Sep 6 17:08:17 gripir ACPI: Fan [FAN] (on) Sep 6 17:08:17 gripir ACPI: Thermal Zone [THRM] (40 C) Sep 6 17:08:17 gripir isapnp: Scanning for PnP cards... Sep 6 17:08:17 gripir isapnp: No Plug & Play device found Sep 6 17:08:17 gripir Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled Sep 6 17:08:17 gripir serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 6 17:08:17 gripir 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 6 17:08:17 gripir Floppy drive(s): fd0 is 1.44M Sep 6 17:08:17 gripir FDC 0 is a post-1991 82077 Sep 6 17:08:17 gripir RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Sep 6 17:08:17 gripir loop: loaded (max 8 devices) Sep 6 17:08:17 gripir PNP: No PS/2 controller found. Probing ports directly. Sep 6 17:08:17 gripir serio: i8042 AUX port at 0x60,0x64 irq 12 Sep 6 17:08:17 gripir serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 6 17:08:17 gripir mice: PS/2 mouse device common for all mice Sep 6 17:08:17 gripir TCP bic registered Sep 6 17:08:17 gripir NET: Registered protocol family 1 Sep 6 17:08:17 gripir NET: Registered protocol family 17 Sep 6 17:08:17 gripir Using IPI No-Shortcut mode Sep 6 17:08:17 gripir ACPI wakeup devices: Sep 6 17:08:17 gripir FUTS PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 Sep 6 17:08:17 gripir ACPI: (supports S0 S1 S4 S5) Sep 6 17:08:17 gripir RAMDISK: Compressed image found at block 0 Sep 6 17:08:17 gripir VFS: Mounted root (ext2 filesystem). Sep 6 17:08:17 gripir Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Sep 6 17:08:17 gripir ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Sep 6 17:08:17 gripir SIS5513: IDE controller at PCI slot 0000:00:02.5 Sep 6 17:08:17 gripir SIS5513: chipset revision 1 Sep 6 17:08:17 gripir SIS5513: not 100% native mode: will probe irqs later Sep 6 17:08:17 gripir SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller Sep 6 17:08:17 gripir ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio Sep 6 17:08:17 gripir ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio Sep 6 17:08:17 gripir hda: ST340810A, ATA DISK drive Sep 6 17:08:17 gripir ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Sep 6 17:08:17 gripir hdc: CD-950E/TKU, ATAPI CD/DVD-ROM drive Sep 6 17:08:17 gripir hdd: AOPEN DUW1616/ARR, ATAPI CD/DVD-ROM drive Sep 6 17:08:17 gripir ide1 at 0x170-0x177,0x376 on irq 15 Sep 6 17:08:17 gripir hda: max request size: 128KiB Sep 6 17:08:17 gripir hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) Sep 6 17:08:17 gripir hda: cache flushes not supported Sep 6 17:08:17 gripir hda: hda1 hda2 hda3 Sep 6 17:08:17 gripir ide-floppy driver 0.99.newide Sep 6 17:08:17 gripir sata_sis 0000:00:05.0: version 0.5 Sep 6 17:08:17 gripir ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 6 17:08:17 gripir sata_sis 0000:00:05.0: Detected SiS 180/181 chipset in SATA mode Sep 6 17:08:17 gripir ata1: SATA max UDMA/133 cmd 0xE100 ctl 0xE202 bmdma 0xE500 irq 16 Sep 6 17:08:17 gripir ata2: SATA max UDMA/133 cmd 0xE300 ctl 0xE402 bmdma 0xE508 irq 16 Sep 6 17:08:17 gripir ata1: SATA link up 1.5 Gbps (SStatus 113) Sep 6 17:08:17 gripir ata1: dev 0 ATA-6, max UDMA/100, 321672960 sectors: LBA48 Sep 6 17:08:17 gripir ata1: dev 0 configured for UDMA/100 Sep 6 17:08:17 gripir scsi0 : sata_sis Sep 6 17:08:17 gripir ata2: SATA link down (SStatus 0) Sep 6 17:08:17 gripir scsi1 : sata_sis Sep 6 17:08:17 gripir Vendor: ATA Model: HDS722516VLSA80 Rev: V34O Sep 6 17:08:17 gripir Type: Direct-Access ANSI SCSI revision: 05 Sep 6 17:08:17 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 6 17:08:17 gripir sda: Write Protect is off Sep 6 17:08:17 gripir SCSI device sda: drive cache: write back Sep 6 17:08:17 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 6 17:08:17 gripir sda: Write Protect is off Sep 6 17:08:17 gripir SCSI device sda: drive cache: write back Sep 6 17:08:17 gripir sda: sda1 Sep 6 17:08:17 gripir sd 0:0:0:0: Attached scsi disk sda Sep 6 17:08:17 gripir ReiserFS: hda3: found reiserfs format "3.6" with standard journal Sep 6 17:08:17 gripir ReiserFS: hda3: using ordered data mode Sep 6 17:08:17 gripir ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Sep 6 17:08:17 gripir ReiserFS: hda3: checking transaction log (hda3) Sep 6 17:08:17 gripir ReiserFS: hda3: Using r5 hash to sort names Sep 6 17:08:17 gripir Freeing unused kernel memory: 240k freed Sep 6 17:08:17 gripir usbcore: registered new driver usbfs Sep 6 17:08:17 gripir usbcore: registered new driver hub Sep 6 17:08:17 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 6 17:08:17 gripir ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 6 17:08:17 gripir hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) Sep 6 17:08:17 gripir Uniform CD-ROM driver Revision: 3.20 Sep 6 17:08:17 gripir CSLIP: code copyright 1989 Regents of the University of California Sep 6 17:08:17 gripir hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Sep 6 17:08:17 gripir parport: PnPBIOS parport detected. Sep 6 17:08:17 gripir parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] Sep 6 17:08:17 gripir PPP generic driver version 2.4.2 Sep 6 17:08:17 gripir input: PC Speaker as /class/input/input0 Sep 6 17:08:17 gripir ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 17 Sep 6 17:08:17 gripir ohci_hcd 0000:00:03.0: OHCI Host Controller Sep 6 17:08:17 gripir ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 Sep 6 17:08:17 gripir ohci_hcd 0000:00:03.0: irq 17, io mem 0xe6024000 Sep 6 17:08:17 gripir Linux agpgart interface v0.101 (c) Dave Jones Sep 6 17:08:17 gripir usb usb1: configuration #1 chosen from 1 choice Sep 6 17:08:17 gripir hub 1-0:1.0: USB hub found Sep 6 17:08:17 gripir hub 1-0:1.0: 3 ports detected Sep 6 17:08:17 gripir ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 18 Sep 6 17:08:17 gripir ohci_hcd 0000:00:03.1: OHCI Host Controller Sep 6 17:08:17 gripir ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 Sep 6 17:08:17 gripir ohci_hcd 0000:00:03.1: irq 18, io mem 0xe6020000 Sep 6 17:08:17 gripir usb usb2: configuration #1 chosen from 1 choice Sep 6 17:08:17 gripir hub 2-0:1.0: USB hub found Sep 6 17:08:17 gripir hub 2-0:1.0: 3 ports detected Sep 6 17:08:17 gripir ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 19 Sep 6 17:08:17 gripir ohci_hcd 0000:00:03.2: OHCI Host Controller Sep 6 17:08:17 gripir ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 Sep 6 17:08:17 gripir ohci_hcd 0000:00:03.2: irq 19, io mem 0xe6021000 Sep 6 17:08:17 gripir usb usb3: configuration #1 chosen from 1 choice Sep 6 17:08:17 gripir hub 3-0:1.0: USB hub found Sep 6 17:08:17 gripir hub 3-0:1.0: 2 ports detected Sep 6 17:08:17 gripir usb 1-1: new low speed USB device using ohci_hcd and address 2 Sep 6 17:08:17 gripir usb 1-1: configuration #1 chosen from 1 choice Sep 6 17:08:17 gripir nvidia: module license 'NVIDIA' taints kernel. Sep 6 17:08:17 gripir ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20 Sep 6 17:08:17 gripir NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774 Tue Aug 1 20:54:08 PDT 2006 Sep 6 17:08:17 gripir sis900.c: v1.08.09 Sep. 19 2005 Sep 6 17:08:17 gripir ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 21 Sep 6 17:08:17 gripir 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. Sep 6 17:08:17 gripir 0000:00:04.0: Using transceiver found at address 1 as default Sep 6 17:08:17 gripir eth0: SiS 900 PCI Fast Ethernet at 0xe000, IRQ 21, 00:11:5b:4a:0d:e2. Sep 6 17:08:17 gripir ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 22 Sep 6 17:08:17 gripir ehci_hcd 0000:00:03.3: EHCI Host Controller Sep 6 17:08:17 gripir ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4 Sep 6 17:08:17 gripir ehci_hcd 0000:00:03.3: irq 22, io mem 0xe6022000 Sep 6 17:08:17 gripir ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Sep 6 17:08:17 gripir usb usb4: configuration #1 chosen from 1 choice Sep 6 17:08:17 gripir hub 4-0:1.0: USB hub found Sep 6 17:08:17 gripir hub 4-0:1.0: 8 ports detected Sep 6 17:08:17 gripir usb 1-1: USB disconnect, address 2 Sep 6 17:08:17 gripir Linux video capture interface: v1.00 Sep 6 17:08:17 gripir saa7130/34: v4l2 driver version 0.2.14 loaded Sep 6 17:08:17 gripir ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 21 Sep 6 17:08:17 gripir saa7134[0]: found at 0000:00:0d.0, rev: 1, irq: 21, latency: 32, mmio: 0xe6026000 Sep 6 17:08:17 gripir saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected] Sep 6 17:08:17 gripir saa7134[0]: board init: gpio is 0 Sep 6 17:08:17 gripir lp0: using parport0 (interrupt-driven). Sep 6 17:08:17 gripir Real Time Clock Driver v1.12ac Sep 6 17:08:17 gripir saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9 Sep 6 17:08:17 gripir saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00 Sep 6 17:08:17 gripir saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff Sep 6 17:08:17 gripir saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 6 17:08:17 gripir saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 6 17:08:17 gripir saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 6 17:08:17 gripir saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 6 17:08:17 gripir saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 6 17:08:17 gripir saa7134[0] Tuner type is 38 Sep 6 17:08:17 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 6 17:08:17 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 6 17:08:17 gripir tuner 0-0060: All bytes are equal. It is not a TEA5767 Sep 6 17:08:17 gripir tuner 0-0060: chip found @ 0xc0 (saa7134[0]) Sep 6 17:08:17 gripir tuner 0-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) Sep 6 17:08:17 gripir ppdev: user-space parallel port driver Sep 6 17:08:17 gripir tda9887 0-0043: chip found @ 0x86 (saa7134[0]) Sep 6 17:08:17 gripir saa7134[0]: registered device video0 [v4l2] Sep 6 17:08:17 gripir saa7134[0]: registered device vbi0 Sep 6 17:08:17 gripir saa7134[0]: registered device radio0 Sep 6 17:08:17 gripir pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Sep 6 17:08:17 gripir usb 2-1: new low speed USB device using ohci_hcd and address 3 Sep 6 17:08:17 gripir usb 2-1: configuration #1 chosen from 1 choice Sep 6 17:08:17 gripir ohci_hcd 0000:00:03.0: wakeup Sep 6 17:08:17 gripir gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xe800, speed 1217kHz Sep 6 17:08:17 gripir agpgart: Detected AGP bridge 0 Sep 6 17:08:17 gripir agpgart: AGP aperture is 64M @ 0xe0000000 Sep 6 17:08:17 gripir usbcore: registered new driver hiddev Sep 6 17:08:17 gripir shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Sep 6 17:08:17 gripir ohci_hcd 0000:00:03.2: wakeup Sep 6 17:08:17 gripir input: Logitech USB-PS/2 Optical Mouse as /class/input/input1 Sep 6 17:08:17 gripir input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.1-1 Sep 6 17:08:17 gripir usbcore: registered new driver usbhid Sep 6 17:08:17 gripir drivers/usb/input/hid-core.c: v2.6:USB HID core driver Sep 6 17:08:17 gripir usb 1-1: new low speed USB device using ohci_hcd and address 3 Sep 6 17:08:17 gripir usb 1-1: configuration #1 chosen from 1 choice Sep 6 17:08:17 gripir input: Microsoft® Office Keyboard as /class/input/input2 Sep 6 17:08:17 gripir input: USB HID v1.10 Keyboard [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 6 17:08:17 gripir input: Microsoft® Office Keyboard as /class/input/input3 Sep 6 17:08:17 gripir input: USB HID v1.10 Device [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 6 17:08:17 gripir NTFS driver 2.1.27 [Flags: R/W MODULE]. Sep 6 17:08:17 gripir NTFS volume version 3.1. Sep 6 17:08:17 gripir usb 3-1: new full speed USB device using ohci_hcd and address 2 Sep 6 17:08:17 gripir kjournald starting. Commit interval 5 seconds Sep 6 17:08:17 gripir EXT3 FS on sda1, internal journal Sep 6 17:08:17 gripir EXT3-fs: mounted filesystem with ordered data mode. Sep 6 17:08:17 gripir usb 3-1: configuration #1 chosen from 1 choice Sep 6 17:08:17 gripir Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 across:498004k Sep 6 17:08:17 gripir prism2usb_init: prism2_usb.o: 0.2.3 Loaded Sep 6 17:08:17 gripir prism2usb_init: dev_info is: prism2_usb Sep 6 17:08:17 gripir usb 3-1: reset full speed USB device using ohci_hcd and address 2 Sep 6 17:08:17 gripir usbcore: registered new driver prism2_usb Sep 6 17:08:17 gripir ident: nic h/w: id=0x8026 1.0.0 Sep 6 17:08:17 gripir ident: pri f/w: id=0x15 1.1.3 Sep 6 17:08:17 gripir ident: sta f/w: id=0x1f 1.7.1 Sep 6 17:08:17 gripir MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1 Sep 6 17:08:17 gripir CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1 Sep 6 17:08:17 gripir PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/4 Sep 6 17:08:17 gripir STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/12 Sep 6 17:08:17 gripir PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 6 17:08:17 gripir STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 6 17:08:17 gripir STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1 Sep 6 17:08:17 gripir Prism2 card SN: 000000000000 Sep 6 17:08:18 gripir linkstatus=CONNECTED Sep 6 17:08:28 gripir NVRM: not using NVAGP, an AGPGART backend is loaded! Sep 6 17:09:06 gripir (gripir-2793): (Version 2.14.0) wird gestartet, Prozesskennung 2793, Benutzer »gripir« Sep 6 17:09:07 gripir (gripir-2793): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 6 17:09:07 gripir (gripir-2793): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 6 17:09:07 gripir (gripir-2793): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 6 17:09:14 gripir (gripir-2793): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 0 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 6 17:09:20 gripir NET: Registered protocol family 10 Sep 6 17:09:20 gripir lo: Disabled Privacy Extensions Sep 6 17:09:20 gripir IPv6 over IPv4 tunneling driver Sep 6 17:39:09 gripir (gripir-2793): Beenden Sep 6 17:39:09 gripir gdm[2731]: Master wird angehalten... Sep 6 17:39:09 gripir shutdown[2731]: shutting down for system halt Sep 6 17:39:09 gripir init: Switching to runlevel: 0 Sep 6 20:05:30 gripir Linux version 2.6.17-ARCH (root@Wohnung) (gcc version 4.1.1) #1 SMP PREEMPT Sat Jul 1 10:16:16 CEST 2006 Sep 6 20:05:30 gripir BIOS-provided physical RAM map: Sep 6 20:05:30 gripir BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Sep 6 20:05:30 gripir BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Sep 6 20:05:30 gripir BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Sep 6 20:05:30 gripir BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) Sep 6 20:05:30 gripir BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) Sep 6 20:05:30 gripir BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) Sep 6 20:05:30 gripir BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Sep 6 20:05:30 gripir BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Sep 6 20:05:30 gripir BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Sep 6 20:05:30 gripir 127MB HIGHMEM available. Sep 6 20:05:30 gripir 896MB LOWMEM available. Sep 6 20:05:30 gripir found SMP MP-table at 000f5570 Sep 6 20:05:30 gripir DMI 2.2 present. Sep 6 20:05:30 gripir ACPI: PM-Timer IO Port: 0x1008 Sep 6 20:05:30 gripir ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Sep 6 20:05:30 gripir Processor #0 15:4 APIC version 16 Sep 6 20:05:30 gripir ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Sep 6 20:05:30 gripir ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Sep 6 20:05:30 gripir IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 Sep 6 20:05:30 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Sep 6 20:05:30 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) Sep 6 20:05:30 gripir Enabling APIC mode: Flat. Using 1 I/O APICs Sep 6 20:05:30 gripir Using ACPI (MADT) for SMP configuration information Sep 6 20:05:30 gripir Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Sep 6 20:05:30 gripir Built 1 zonelists Sep 6 20:05:30 gripir Kernel command line: root=/dev/hda3 ro vga=773 Sep 6 20:05:30 gripir Enabling fast FPU save and restore... done. Sep 6 20:05:30 gripir Enabling unmasked SIMD FPU exception support... done. Sep 6 20:05:30 gripir Initializing CPU#0 Sep 6 20:05:30 gripir PID hash table entries: 4096 (order: 12, 16384 bytes) Sep 6 20:05:30 gripir Detected 1999.609 MHz processor. Sep 6 20:05:30 gripir Using pmtmr for high-res timesource Sep 6 20:05:30 gripir Console: colour dummy device 80x25 Sep 6 20:05:30 gripir Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Sep 6 20:05:30 gripir Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Sep 6 20:05:30 gripir Memory: 1034156k/1048512k available (2409k kernel code, 13576k reserved, 715k data, 240k init, 131008k highmem) Sep 6 20:05:30 gripir Checking if this processor honours the WP bit even in supervisor mode... Ok. Sep 6 20:05:30 gripir Calibrating delay using timer specific routine.. 4001.55 BogoMIPS (lpj=8003108) Sep 6 20:05:30 gripir Security Framework v1.0.0 initialized Sep 6 20:05:30 gripir Mount-cache hash table entries: 512 Sep 6 20:05:30 gripir CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Sep 6 20:05:30 gripir CPU: L2 Cache: 512K (64 bytes/line) Sep 6 20:05:30 gripir Intel machine check architecture supported. Sep 6 20:05:30 gripir Intel machine check reporting enabled on CPU#0. Sep 6 20:05:30 gripir Checking 'hlt' instruction... OK. Sep 6 20:05:30 gripir SMP alternatives: switching to UP code Sep 6 20:05:30 gripir Freeing SMP alternatives: 16k freed Sep 6 20:05:30 gripir checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Sep 6 20:05:30 gripir Freeing initrd memory: 840k freed Sep 6 20:05:30 gripir ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. Sep 6 20:05:30 gripir CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 0a Sep 6 20:05:30 gripir Total of 1 processors activated (4001.55 BogoMIPS). Sep 6 20:05:30 gripir ENABLING IO-APIC IRQs Sep 6 20:05:30 gripir ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Sep 6 20:05:30 gripir Brought up 1 CPUs Sep 6 20:05:30 gripir migration_cost=0 Sep 6 20:05:30 gripir NET: Registered protocol family 16 Sep 6 20:05:30 gripir ACPI: bus type pci registered Sep 6 20:05:30 gripir PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=1 Sep 6 20:05:30 gripir Setting up standard PCI resources Sep 6 20:05:30 gripir ACPI: Subsystem revision 20060127 Sep 6 20:05:30 gripir ACPI: Interpreter enabled Sep 6 20:05:30 gripir ACPI: Using IOAPIC for interrupt routing Sep 6 20:05:30 gripir ACPI: PCI Root Bridge [PCI0] (0000:00) Sep 6 20:05:30 gripir ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Sep 6 20:05:30 gripir ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) Sep 6 20:05:30 gripir ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 6 20:05:30 gripir ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. Sep 6 20:05:30 gripir ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 6 20:05:30 gripir ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 6 20:05:30 gripir ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 6 20:05:30 gripir ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Sep 6 20:05:30 gripir ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) Sep 6 20:05:30 gripir Linux Plug and Play Support v0.97 (c) Adam Belay Sep 6 20:05:30 gripir pnp: PnP ACPI init Sep 6 20:05:30 gripir pnp: PnP ACPI: found 10 devices Sep 6 20:05:30 gripir SCSI subsystem initialized Sep 6 20:05:30 gripir PCI: Using ACPI for IRQ routing Sep 6 20:05:30 gripir PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Sep 6 20:05:30 gripir PCI: Bridge: 0000:00:01.0 Sep 6 20:05:30 gripir IO window: disabled. Sep 6 20:05:30 gripir MEM window: e4000000-e5ffffff Sep 6 20:05:30 gripir PREFETCH window: d0000000-dfffffff Sep 6 20:05:30 gripir NET: Registered protocol family 2 Sep 6 20:05:30 gripir IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Sep 6 20:05:30 gripir TCP established hash table entries: 131072 (order: 8, 1572864 bytes) Sep 6 20:05:30 gripir TCP bind hash table entries: 65536 (order: 7, 786432 bytes) Sep 6 20:05:30 gripir TCP: Hash tables configured (established 131072 bind 65536) Sep 6 20:05:30 gripir TCP reno registered Sep 6 20:05:30 gripir apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) Sep 6 20:05:30 gripir apm: overridden by ACPI. Sep 6 20:05:30 gripir highmem bounce pool size: 64 pages Sep 6 20:05:30 gripir VFS: Disk quotas dquot_6.5.1 Sep 6 20:05:30 gripir Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Sep 6 20:05:30 gripir Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Sep 6 20:05:30 gripir Initializing Cryptographic API Sep 6 20:05:30 gripir io scheduler noop registered Sep 6 20:05:30 gripir io scheduler anticipatory registered (default) Sep 6 20:05:30 gripir io scheduler deadline registered Sep 6 20:05:30 gripir io scheduler cfq registered Sep 6 20:05:30 gripir vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 262144k Sep 6 20:05:30 gripir vesafb: mode is 1024x768x8, linelength=1024, pages=3 Sep 6 20:05:30 gripir vesafb: protected mode interface info at c000:e2e0 Sep 6 20:05:30 gripir vesafb: scrolling: redraw Sep 6 20:05:30 gripir vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Sep 6 20:05:30 gripir Console: switching to colour frame buffer device 128x48 Sep 6 20:05:30 gripir fb0: VESA VGA frame buffer device Sep 6 20:05:30 gripir ACPI: Power Button (FF) [PWRF] Sep 6 20:05:30 gripir ACPI: Power Button (CM) [PWRB] Sep 6 20:05:30 gripir ACPI: Sleep Button (CM) [FUTS] Sep 6 20:05:30 gripir ACPI: Fan [FAN] (on) Sep 6 20:05:30 gripir ACPI: Thermal Zone [THRM] (40 C) Sep 6 20:05:30 gripir isapnp: Scanning for PnP cards... Sep 6 20:05:30 gripir isapnp: No Plug & Play device found Sep 6 20:05:30 gripir Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled Sep 6 20:05:30 gripir serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 6 20:05:30 gripir 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 6 20:05:30 gripir Floppy drive(s): fd0 is 1.44M Sep 6 20:05:30 gripir FDC 0 is a post-1991 82077 Sep 6 20:05:30 gripir RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Sep 6 20:05:30 gripir loop: loaded (max 8 devices) Sep 6 20:05:30 gripir PNP: No PS/2 controller found. Probing ports directly. Sep 6 20:05:30 gripir serio: i8042 AUX port at 0x60,0x64 irq 12 Sep 6 20:05:30 gripir serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 6 20:05:30 gripir mice: PS/2 mouse device common for all mice Sep 6 20:05:30 gripir TCP bic registered Sep 6 20:05:30 gripir NET: Registered protocol family 1 Sep 6 20:05:30 gripir NET: Registered protocol family 17 Sep 6 20:05:30 gripir Using IPI No-Shortcut mode Sep 6 20:05:30 gripir ACPI wakeup devices: Sep 6 20:05:30 gripir FUTS PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 Sep 6 20:05:30 gripir ACPI: (supports S0 S1 S4 S5) Sep 6 20:05:30 gripir RAMDISK: Compressed image found at block 0 Sep 6 20:05:30 gripir VFS: Mounted root (ext2 filesystem). Sep 6 20:05:30 gripir Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Sep 6 20:05:30 gripir ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Sep 6 20:05:30 gripir SIS5513: IDE controller at PCI slot 0000:00:02.5 Sep 6 20:05:30 gripir SIS5513: chipset revision 1 Sep 6 20:05:30 gripir SIS5513: not 100% native mode: will probe irqs later Sep 6 20:05:30 gripir SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller Sep 6 20:05:30 gripir ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio Sep 6 20:05:30 gripir ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio Sep 6 20:05:30 gripir hda: ST340810A, ATA DISK drive Sep 6 20:05:30 gripir ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Sep 6 20:05:30 gripir hdc: CD-950E/TKU, ATAPI CD/DVD-ROM drive Sep 6 20:05:30 gripir hdd: AOPEN DUW1616/ARR, ATAPI CD/DVD-ROM drive Sep 6 20:05:30 gripir ide1 at 0x170-0x177,0x376 on irq 15 Sep 6 20:05:30 gripir hda: max request size: 128KiB Sep 6 20:05:30 gripir hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) Sep 6 20:05:30 gripir hda: cache flushes not supported Sep 6 20:05:30 gripir hda: hda1 hda2 hda3 Sep 6 20:05:30 gripir ide-floppy driver 0.99.newide Sep 6 20:05:30 gripir sata_sis 0000:00:05.0: version 0.5 Sep 6 20:05:30 gripir ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 6 20:05:30 gripir sata_sis 0000:00:05.0: Detected SiS 180/181 chipset in SATA mode Sep 6 20:05:30 gripir ata1: SATA max UDMA/133 cmd 0xE100 ctl 0xE202 bmdma 0xE500 irq 16 Sep 6 20:05:30 gripir ata2: SATA max UDMA/133 cmd 0xE300 ctl 0xE402 bmdma 0xE508 irq 16 Sep 6 20:05:30 gripir ata1: SATA link up 1.5 Gbps (SStatus 113) Sep 6 20:05:30 gripir ata1: dev 0 ATA-6, max UDMA/100, 321672960 sectors: LBA48 Sep 6 20:05:30 gripir ata1: dev 0 configured for UDMA/100 Sep 6 20:05:30 gripir scsi0 : sata_sis Sep 6 20:05:30 gripir ata2: SATA link down (SStatus 0) Sep 6 20:05:30 gripir scsi1 : sata_sis Sep 6 20:05:30 gripir Vendor: ATA Model: HDS722516VLSA80 Rev: V34O Sep 6 20:05:30 gripir Type: Direct-Access ANSI SCSI revision: 05 Sep 6 20:05:30 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 6 20:05:30 gripir sda: Write Protect is off Sep 6 20:05:30 gripir SCSI device sda: drive cache: write back Sep 6 20:05:30 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 6 20:05:30 gripir sda: Write Protect is off Sep 6 20:05:30 gripir SCSI device sda: drive cache: write back Sep 6 20:05:30 gripir sda: sda1 Sep 6 20:05:30 gripir sd 0:0:0:0: Attached scsi disk sda Sep 6 20:05:30 gripir ReiserFS: hda3: found reiserfs format "3.6" with standard journal Sep 6 20:05:30 gripir ReiserFS: hda3: using ordered data mode Sep 6 20:05:30 gripir ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Sep 6 20:05:30 gripir ReiserFS: hda3: checking transaction log (hda3) Sep 6 20:05:30 gripir ReiserFS: hda3: Using r5 hash to sort names Sep 6 20:05:30 gripir Freeing unused kernel memory: 240k freed Sep 6 20:05:30 gripir usbcore: registered new driver usbfs Sep 6 20:05:30 gripir usbcore: registered new driver hub Sep 6 20:05:30 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 6 20:05:30 gripir ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 6 20:05:30 gripir Linux agpgart interface v0.101 (c) Dave Jones Sep 6 20:05:30 gripir nvidia: module license 'NVIDIA' taints kernel. Sep 6 20:05:30 gripir ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17 Sep 6 20:05:30 gripir NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774 Tue Aug 1 20:54:08 PDT 2006 Sep 6 20:05:30 gripir hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) Sep 6 20:05:30 gripir Uniform CD-ROM driver Revision: 3.20 Sep 6 20:05:30 gripir hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Sep 6 20:05:30 gripir CSLIP: code copyright 1989 Regents of the University of California Sep 6 20:05:30 gripir PPP generic driver version 2.4.2 Sep 6 20:05:30 gripir sis900.c: v1.08.09 Sep. 19 2005 Sep 6 20:05:30 gripir ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 18 Sep 6 20:05:30 gripir 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. Sep 6 20:05:30 gripir 0000:00:04.0: Using transceiver found at address 1 as default Sep 6 20:05:30 gripir eth0: SiS 900 PCI Fast Ethernet at 0xe000, IRQ 18, 00:11:5b:4a:0d:e2. Sep 6 20:05:30 gripir parport: PnPBIOS parport detected. Sep 6 20:05:30 gripir parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] Sep 6 20:05:30 gripir agpgart: Detected AGP bridge 0 Sep 6 20:05:30 gripir agpgart: AGP aperture is 64M @ 0xe0000000 Sep 6 20:05:30 gripir ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 19 Sep 6 20:05:30 gripir ehci_hcd 0000:00:03.3: EHCI Host Controller Sep 6 20:05:30 gripir ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 Sep 6 20:05:30 gripir ehci_hcd 0000:00:03.3: irq 19, io mem 0xe6022000 Sep 6 20:05:30 gripir ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Sep 6 20:05:30 gripir usb usb1: configuration #1 chosen from 1 choice Sep 6 20:05:30 gripir hub 1-0:1.0: USB hub found Sep 6 20:05:30 gripir hub 1-0:1.0: 8 ports detected Sep 6 20:05:30 gripir input: PC Speaker as /class/input/input0 Sep 6 20:05:30 gripir ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20 Sep 6 20:05:30 gripir ohci_hcd 0000:00:03.0: OHCI Host Controller Sep 6 20:05:30 gripir ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 Sep 6 20:05:30 gripir ohci_hcd 0000:00:03.0: irq 20, io mem 0xe6024000 Sep 6 20:05:30 gripir usb usb2: configuration #1 chosen from 1 choice Sep 6 20:05:30 gripir hub 2-0:1.0: USB hub found Sep 6 20:05:30 gripir hub 2-0:1.0: 3 ports detected Sep 6 20:05:30 gripir Linux video capture interface: v1.00 Sep 6 20:05:30 gripir Real Time Clock Driver v1.12ac Sep 6 20:05:30 gripir ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21 Sep 6 20:05:30 gripir ohci_hcd 0000:00:03.1: OHCI Host Controller Sep 6 20:05:30 gripir ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 Sep 6 20:05:30 gripir ohci_hcd 0000:00:03.1: irq 21, io mem 0xe6020000 Sep 6 20:05:30 gripir usb usb3: configuration #1 chosen from 1 choice Sep 6 20:05:30 gripir hub 3-0:1.0: USB hub found Sep 6 20:05:30 gripir hub 3-0:1.0: 3 ports detected Sep 6 20:05:30 gripir ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22 Sep 6 20:05:30 gripir ohci_hcd 0000:00:03.2: OHCI Host Controller Sep 6 20:05:30 gripir ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 Sep 6 20:05:30 gripir ohci_hcd 0000:00:03.2: irq 22, io mem 0xe6021000 Sep 6 20:05:30 gripir usb usb4: configuration #1 chosen from 1 choice Sep 6 20:05:30 gripir hub 4-0:1.0: USB hub found Sep 6 20:05:30 gripir hub 4-0:1.0: 2 ports detected Sep 6 20:05:30 gripir gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xe800, speed 1217kHz Sep 6 20:05:30 gripir saa7130/34: v4l2 driver version 0.2.14 loaded Sep 6 20:05:30 gripir ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 18 Sep 6 20:05:30 gripir saa7134[0]: found at 0000:00:0d.0, rev: 1, irq: 18, latency: 32, mmio: 0xe6026000 Sep 6 20:05:30 gripir saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected] Sep 6 20:05:30 gripir saa7134[0]: board init: gpio is 0 Sep 6 20:05:30 gripir lp0: using parport0 (interrupt-driven). Sep 6 20:05:30 gripir ppdev: user-space parallel port driver Sep 6 20:05:30 gripir pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Sep 6 20:05:30 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 6 20:05:30 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 6 20:05:30 gripir usb 2-1: new low speed USB device using ohci_hcd and address 2 Sep 6 20:05:30 gripir saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9 Sep 6 20:05:30 gripir saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00 Sep 6 20:05:30 gripir saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff Sep 6 20:05:30 gripir saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 6 20:05:30 gripir saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 6 20:05:30 gripir saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 6 20:05:30 gripir saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 6 20:05:30 gripir saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 6 20:05:30 gripir saa7134[0] Tuner type is 38 Sep 6 20:05:30 gripir tuner 0-0060: All bytes are equal. It is not a TEA5767 Sep 6 20:05:30 gripir tuner 0-0060: chip found @ 0xc0 (saa7134[0]) Sep 6 20:05:30 gripir tuner 0-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) Sep 6 20:05:30 gripir tda9887 0-0043: chip found @ 0x86 (saa7134[0]) Sep 6 20:05:30 gripir saa7134[0]: registered device video0 [v4l2] Sep 6 20:05:30 gripir saa7134[0]: registered device vbi0 Sep 6 20:05:30 gripir saa7134[0]: registered device radio0 Sep 6 20:05:30 gripir shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Sep 6 20:05:30 gripir usb 2-1: configuration #1 chosen from 1 choice Sep 6 20:05:30 gripir usb 3-1: new low speed USB device using ohci_hcd and address 2 Sep 6 20:05:30 gripir usb 3-1: configuration #1 chosen from 1 choice Sep 6 20:05:30 gripir usb 4-1: new full speed USB device using ohci_hcd and address 2 Sep 6 20:05:30 gripir usb 4-1: configuration #1 chosen from 1 choice Sep 6 20:05:30 gripir usbcore: registered new driver hiddev Sep 6 20:05:30 gripir input: Microsoft® Office Keyboard as /class/input/input1 Sep 6 20:05:30 gripir input: USB HID v1.10 Keyboard [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 6 20:05:30 gripir input: Microsoft® Office Keyboard as /class/input/input2 Sep 6 20:05:30 gripir input: USB HID v1.10 Device [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 6 20:05:30 gripir input: Logitech USB-PS/2 Optical Mouse as /class/input/input3 Sep 6 20:05:30 gripir input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.1-1 Sep 6 20:05:30 gripir usbcore: registered new driver usbhid Sep 6 20:05:30 gripir drivers/usb/input/hid-core.c: v2.6:USB HID core driver Sep 6 20:05:30 gripir prism2usb_init: prism2_usb.o: 0.2.3 Loaded Sep 6 20:05:30 gripir prism2usb_init: dev_info is: prism2_usb Sep 6 20:05:30 gripir usb 4-1: reset full speed USB device using ohci_hcd and address 2 Sep 6 20:05:30 gripir usbcore: registered new driver prism2_usb Sep 6 20:05:30 gripir NTFS driver 2.1.27 [Flags: R/W MODULE]. Sep 6 20:05:30 gripir NTFS volume version 3.1. Sep 6 20:05:30 gripir kjournald starting. Commit interval 5 seconds Sep 6 20:05:30 gripir EXT3 FS on sda1, internal journal Sep 6 20:05:30 gripir EXT3-fs: mounted filesystem with ordered data mode. Sep 6 20:05:30 gripir Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 across:498004k Sep 6 20:05:31 gripir ident: nic h/w: id=0x8026 1.0.0 Sep 6 20:05:31 gripir ident: pri f/w: id=0x15 1.1.3 Sep 6 20:05:31 gripir ident: sta f/w: id=0x1f 1.7.1 Sep 6 20:05:31 gripir MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1 Sep 6 20:05:31 gripir CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1 Sep 6 20:05:31 gripir PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/4 Sep 6 20:05:31 gripir STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/12 Sep 6 20:05:31 gripir PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 6 20:05:31 gripir STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 6 20:05:31 gripir STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1 Sep 6 20:05:31 gripir Prism2 card SN: 000000000000 Sep 6 20:05:32 gripir linkstatus=CONNECTED Sep 6 20:05:41 gripir NVRM: not using NVAGP, an AGPGART backend is loaded! Sep 6 20:06:10 gripir (gripir-2742): (Version 2.14.0) wird gestartet, Prozesskennung 2742, Benutzer »gripir« Sep 6 20:06:10 gripir (gripir-2742): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 6 20:06:10 gripir (gripir-2742): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 6 20:06:10 gripir (gripir-2742): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 6 20:06:17 gripir (gripir-2742): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 0 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 6 20:06:25 gripir NET: Registered protocol family 10 Sep 6 20:06:25 gripir lo: Disabled Privacy Extensions Sep 6 20:06:25 gripir IPv6 over IPv4 tunneling driver Sep 6 20:41:48 gripir NET: Registered protocol family 4 Sep 6 21:17:31 gripir usb 2-2: new full speed USB device using ohci_hcd and address 3 Sep 6 21:17:31 gripir usb 2-2: configuration #1 chosen from 1 choice Sep 6 21:17:32 gripir Initializing USB Mass Storage driver... Sep 6 21:17:32 gripir scsi2 : SCSI emulation for USB Mass Storage devices Sep 6 21:17:32 gripir usbcore: registered new driver usb-storage Sep 6 21:17:32 gripir USB Mass Storage support registered. Sep 6 21:17:37 gripir Vendor: OLYMPUS Model: FE130/X720 Rev: 1.00 Sep 6 21:17:37 gripir Type: Direct-Access ANSI SCSI revision: 02 Sep 6 21:17:37 gripir SCSI device sdb: 1023120 512-byte hdwr sectors (524 MB) Sep 6 21:17:37 gripir sdb: Write Protect is off Sep 6 21:17:37 gripir SCSI device sdb: 1023120 512-byte hdwr sectors (524 MB) Sep 6 21:17:37 gripir sdb: Write Protect is off Sep 6 21:17:37 gripir sdb: sdb1 Sep 6 21:17:37 gripir sd 2:0:0:0: Attached scsi removable disk sdb Sep 6 22:41:10 gripir usb 2-2: USB disconnect, address 3 Sep 6 23:37:41 gripir (gripir-2742): Beenden Sep 6 23:37:41 gripir gdm[2680]: Master wird angehalten... Sep 6 23:37:42 gripir shutdown[2680]: shutting down for system halt Sep 6 23:37:42 gripir init: Switching to runlevel: 0 Sep 7 16:57:27 gripir Linux version 2.6.17-ARCH (root@Wohnung) (gcc version 4.1.1) #1 SMP PREEMPT Sat Jul 1 10:16:16 CEST 2006 Sep 7 16:57:27 gripir BIOS-provided physical RAM map: Sep 7 16:57:27 gripir BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Sep 7 16:57:27 gripir BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Sep 7 16:57:27 gripir BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Sep 7 16:57:27 gripir BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) Sep 7 16:57:27 gripir BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) Sep 7 16:57:27 gripir BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) Sep 7 16:57:27 gripir BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Sep 7 16:57:27 gripir BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Sep 7 16:57:27 gripir BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Sep 7 16:57:27 gripir 127MB HIGHMEM available. Sep 7 16:57:27 gripir 896MB LOWMEM available. Sep 7 16:57:27 gripir found SMP MP-table at 000f5570 Sep 7 16:57:27 gripir DMI 2.2 present. Sep 7 16:57:27 gripir ACPI: PM-Timer IO Port: 0x1008 Sep 7 16:57:27 gripir ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Sep 7 16:57:27 gripir Processor #0 15:4 APIC version 16 Sep 7 16:57:27 gripir ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Sep 7 16:57:27 gripir ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Sep 7 16:57:27 gripir IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 Sep 7 16:57:27 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Sep 7 16:57:27 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) Sep 7 16:57:27 gripir Enabling APIC mode: Flat. Using 1 I/O APICs Sep 7 16:57:27 gripir Using ACPI (MADT) for SMP configuration information Sep 7 16:57:27 gripir Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Sep 7 16:57:27 gripir Built 1 zonelists Sep 7 16:57:27 gripir Kernel command line: root=/dev/hda3 ro vga=773 Sep 7 16:57:27 gripir Enabling fast FPU save and restore... done. Sep 7 16:57:27 gripir Enabling unmasked SIMD FPU exception support... done. Sep 7 16:57:27 gripir Initializing CPU#0 Sep 7 16:57:27 gripir PID hash table entries: 4096 (order: 12, 16384 bytes) Sep 7 16:57:27 gripir Detected 1999.779 MHz processor. Sep 7 16:57:27 gripir Using pmtmr for high-res timesource Sep 7 16:57:27 gripir Console: colour dummy device 80x25 Sep 7 16:57:27 gripir Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Sep 7 16:57:27 gripir Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Sep 7 16:57:27 gripir Memory: 1034156k/1048512k available (2409k kernel code, 13576k reserved, 715k data, 240k init, 131008k highmem) Sep 7 16:57:27 gripir Checking if this processor honours the WP bit even in supervisor mode... Ok. Sep 7 16:57:27 gripir Calibrating delay using timer specific routine.. 4001.53 BogoMIPS (lpj=8003077) Sep 7 16:57:27 gripir Security Framework v1.0.0 initialized Sep 7 16:57:27 gripir Mount-cache hash table entries: 512 Sep 7 16:57:27 gripir CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Sep 7 16:57:27 gripir CPU: L2 Cache: 512K (64 bytes/line) Sep 7 16:57:27 gripir Intel machine check architecture supported. Sep 7 16:57:27 gripir Intel machine check reporting enabled on CPU#0. Sep 7 16:57:27 gripir Checking 'hlt' instruction... OK. Sep 7 16:57:27 gripir SMP alternatives: switching to UP code Sep 7 16:57:27 gripir Freeing SMP alternatives: 16k freed Sep 7 16:57:27 gripir checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Sep 7 16:57:27 gripir Freeing initrd memory: 840k freed Sep 7 16:57:27 gripir ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. Sep 7 16:57:27 gripir CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 0a Sep 7 16:57:27 gripir Total of 1 processors activated (4001.53 BogoMIPS). Sep 7 16:57:27 gripir ENABLING IO-APIC IRQs Sep 7 16:57:27 gripir ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Sep 7 16:57:27 gripir Brought up 1 CPUs Sep 7 16:57:27 gripir migration_cost=0 Sep 7 16:57:27 gripir NET: Registered protocol family 16 Sep 7 16:57:27 gripir ACPI: bus type pci registered Sep 7 16:57:27 gripir PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=1 Sep 7 16:57:27 gripir Setting up standard PCI resources Sep 7 16:57:27 gripir ACPI: Subsystem revision 20060127 Sep 7 16:57:27 gripir ACPI: Interpreter enabled Sep 7 16:57:27 gripir ACPI: Using IOAPIC for interrupt routing Sep 7 16:57:27 gripir ACPI: PCI Root Bridge [PCI0] (0000:00) Sep 7 16:57:27 gripir ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Sep 7 16:57:27 gripir ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) Sep 7 16:57:27 gripir ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 7 16:57:27 gripir ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. Sep 7 16:57:27 gripir ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 7 16:57:27 gripir ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 7 16:57:27 gripir ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 7 16:57:27 gripir ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Sep 7 16:57:27 gripir ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) Sep 7 16:57:27 gripir Linux Plug and Play Support v0.97 (c) Adam Belay Sep 7 16:57:27 gripir pnp: PnP ACPI init Sep 7 16:57:27 gripir pnp: PnP ACPI: found 10 devices Sep 7 16:57:27 gripir SCSI subsystem initialized Sep 7 16:57:27 gripir PCI: Using ACPI for IRQ routing Sep 7 16:57:27 gripir PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Sep 7 16:57:27 gripir PCI: Bridge: 0000:00:01.0 Sep 7 16:57:27 gripir IO window: disabled. Sep 7 16:57:27 gripir MEM window: e4000000-e5ffffff Sep 7 16:57:27 gripir PREFETCH window: d0000000-dfffffff Sep 7 16:57:27 gripir NET: Registered protocol family 2 Sep 7 16:57:27 gripir IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Sep 7 16:57:27 gripir TCP established hash table entries: 131072 (order: 8, 1572864 bytes) Sep 7 16:57:27 gripir TCP bind hash table entries: 65536 (order: 7, 786432 bytes) Sep 7 16:57:27 gripir TCP: Hash tables configured (established 131072 bind 65536) Sep 7 16:57:27 gripir TCP reno registered Sep 7 16:57:27 gripir apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) Sep 7 16:57:27 gripir apm: overridden by ACPI. Sep 7 16:57:27 gripir highmem bounce pool size: 64 pages Sep 7 16:57:27 gripir VFS: Disk quotas dquot_6.5.1 Sep 7 16:57:27 gripir Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Sep 7 16:57:27 gripir Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Sep 7 16:57:27 gripir Initializing Cryptographic API Sep 7 16:57:27 gripir io scheduler noop registered Sep 7 16:57:27 gripir io scheduler anticipatory registered (default) Sep 7 16:57:27 gripir io scheduler deadline registered Sep 7 16:57:27 gripir io scheduler cfq registered Sep 7 16:57:27 gripir vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 262144k Sep 7 16:57:27 gripir vesafb: mode is 1024x768x8, linelength=1024, pages=3 Sep 7 16:57:27 gripir vesafb: protected mode interface info at c000:e2e0 Sep 7 16:57:27 gripir vesafb: scrolling: redraw Sep 7 16:57:27 gripir vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Sep 7 16:57:27 gripir Console: switching to colour frame buffer device 128x48 Sep 7 16:57:27 gripir fb0: VESA VGA frame buffer device Sep 7 16:57:27 gripir ACPI: Power Button (FF) [PWRF] Sep 7 16:57:27 gripir ACPI: Power Button (CM) [PWRB] Sep 7 16:57:27 gripir ACPI: Sleep Button (CM) [FUTS] Sep 7 16:57:27 gripir ACPI: Fan [FAN] (on) Sep 7 16:57:27 gripir ACPI: Thermal Zone [THRM] (40 C) Sep 7 16:57:27 gripir isapnp: Scanning for PnP cards... Sep 7 16:57:27 gripir isapnp: No Plug & Play device found Sep 7 16:57:27 gripir Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled Sep 7 16:57:27 gripir serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 7 16:57:27 gripir 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 7 16:57:27 gripir Floppy drive(s): fd0 is 1.44M Sep 7 16:57:27 gripir FDC 0 is a post-1991 82077 Sep 7 16:57:27 gripir RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Sep 7 16:57:27 gripir loop: loaded (max 8 devices) Sep 7 16:57:27 gripir PNP: No PS/2 controller found. Probing ports directly. Sep 7 16:57:27 gripir serio: i8042 AUX port at 0x60,0x64 irq 12 Sep 7 16:57:27 gripir serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 7 16:57:27 gripir mice: PS/2 mouse device common for all mice Sep 7 16:57:27 gripir TCP bic registered Sep 7 16:57:27 gripir NET: Registered protocol family 1 Sep 7 16:57:27 gripir NET: Registered protocol family 17 Sep 7 16:57:27 gripir Using IPI No-Shortcut mode Sep 7 16:57:27 gripir ACPI wakeup devices: Sep 7 16:57:27 gripir FUTS PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 Sep 7 16:57:27 gripir ACPI: (supports S0 S1 S4 S5) Sep 7 16:57:27 gripir RAMDISK: Compressed image found at block 0 Sep 7 16:57:27 gripir VFS: Mounted root (ext2 filesystem). Sep 7 16:57:27 gripir Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Sep 7 16:57:27 gripir ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Sep 7 16:57:27 gripir SIS5513: IDE controller at PCI slot 0000:00:02.5 Sep 7 16:57:27 gripir SIS5513: chipset revision 1 Sep 7 16:57:27 gripir SIS5513: not 100% native mode: will probe irqs later Sep 7 16:57:27 gripir SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller Sep 7 16:57:27 gripir ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio Sep 7 16:57:27 gripir ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio Sep 7 16:57:27 gripir hda: ST340810A, ATA DISK drive Sep 7 16:57:27 gripir ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Sep 7 16:57:27 gripir hdc: CD-950E/TKU, ATAPI CD/DVD-ROM drive Sep 7 16:57:27 gripir hdd: AOPEN DUW1616/ARR, ATAPI CD/DVD-ROM drive Sep 7 16:57:27 gripir ide1 at 0x170-0x177,0x376 on irq 15 Sep 7 16:57:27 gripir hda: max request size: 128KiB Sep 7 16:57:27 gripir hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) Sep 7 16:57:27 gripir hda: cache flushes not supported Sep 7 16:57:27 gripir hda: hda1 hda2 hda3 Sep 7 16:57:27 gripir ide-floppy driver 0.99.newide Sep 7 16:57:27 gripir sata_sis 0000:00:05.0: version 0.5 Sep 7 16:57:27 gripir ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 7 16:57:27 gripir sata_sis 0000:00:05.0: Detected SiS 180/181 chipset in SATA mode Sep 7 16:57:27 gripir ata1: SATA max UDMA/133 cmd 0xE100 ctl 0xE202 bmdma 0xE500 irq 16 Sep 7 16:57:27 gripir ata2: SATA max UDMA/133 cmd 0xE300 ctl 0xE402 bmdma 0xE508 irq 16 Sep 7 16:57:27 gripir ata1: SATA link up 1.5 Gbps (SStatus 113) Sep 7 16:57:27 gripir ata1: dev 0 ATA-6, max UDMA/100, 321672960 sectors: LBA48 Sep 7 16:57:27 gripir ata1: dev 0 configured for UDMA/100 Sep 7 16:57:27 gripir scsi0 : sata_sis Sep 7 16:57:27 gripir ata2: SATA link down (SStatus 0) Sep 7 16:57:27 gripir scsi1 : sata_sis Sep 7 16:57:27 gripir Vendor: ATA Model: HDS722516VLSA80 Rev: V34O Sep 7 16:57:27 gripir Type: Direct-Access ANSI SCSI revision: 05 Sep 7 16:57:27 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 7 16:57:27 gripir sda: Write Protect is off Sep 7 16:57:27 gripir SCSI device sda: drive cache: write back Sep 7 16:57:27 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 7 16:57:27 gripir sda: Write Protect is off Sep 7 16:57:27 gripir SCSI device sda: drive cache: write back Sep 7 16:57:27 gripir sda: sda1 Sep 7 16:57:27 gripir sd 0:0:0:0: Attached scsi disk sda Sep 7 16:57:27 gripir ReiserFS: hda3: found reiserfs format "3.6" with standard journal Sep 7 16:57:27 gripir ReiserFS: hda3: using ordered data mode Sep 7 16:57:27 gripir ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Sep 7 16:57:27 gripir ReiserFS: hda3: checking transaction log (hda3) Sep 7 16:57:27 gripir ReiserFS: hda3: Using r5 hash to sort names Sep 7 16:57:27 gripir Freeing unused kernel memory: 240k freed Sep 7 16:57:27 gripir usbcore: registered new driver usbfs Sep 7 16:57:27 gripir usbcore: registered new driver hub Sep 7 16:57:27 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 7 16:57:27 gripir ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 7 16:57:27 gripir hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) Sep 7 16:57:27 gripir Uniform CD-ROM driver Revision: 3.20 Sep 7 16:57:27 gripir parport: PnPBIOS parport detected. Sep 7 16:57:27 gripir parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] Sep 7 16:57:27 gripir input: PC Speaker as /class/input/input0 Sep 7 16:57:27 gripir hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Sep 7 16:57:27 gripir Linux agpgart interface v0.101 (c) Dave Jones Sep 7 16:57:27 gripir Real Time Clock Driver v1.12ac Sep 7 16:57:27 gripir CSLIP: code copyright 1989 Regents of the University of California Sep 7 16:57:27 gripir PPP generic driver version 2.4.2 Sep 7 16:57:27 gripir sis900.c: v1.08.09 Sep. 19 2005 Sep 7 16:57:27 gripir ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 17 Sep 7 16:57:27 gripir 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. Sep 7 16:57:27 gripir 0000:00:04.0: Using transceiver found at address 1 as default Sep 7 16:57:27 gripir eth0: SiS 900 PCI Fast Ethernet at 0xe000, IRQ 17, 00:11:5b:4a:0d:e2. Sep 7 16:57:27 gripir nvidia: module license 'NVIDIA' taints kernel. Sep 7 16:57:27 gripir ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 18 Sep 7 16:57:27 gripir NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774 Tue Aug 1 20:54:08 PDT 2006 Sep 7 16:57:27 gripir gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xe800, speed 1242kHz Sep 7 16:57:27 gripir ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 19 Sep 7 16:57:27 gripir ehci_hcd 0000:00:03.3: EHCI Host Controller Sep 7 16:57:27 gripir ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 Sep 7 16:57:27 gripir ehci_hcd 0000:00:03.3: irq 19, io mem 0xe6022000 Sep 7 16:57:27 gripir ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Sep 7 16:57:27 gripir usb usb1: configuration #1 chosen from 1 choice Sep 7 16:57:27 gripir hub 1-0:1.0: USB hub found Sep 7 16:57:27 gripir hub 1-0:1.0: 8 ports detected Sep 7 16:57:27 gripir ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20 Sep 7 16:57:27 gripir ohci_hcd 0000:00:03.0: OHCI Host Controller Sep 7 16:57:27 gripir ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 Sep 7 16:57:27 gripir ohci_hcd 0000:00:03.0: irq 20, io mem 0xe6024000 Sep 7 16:57:27 gripir usb usb2: configuration #1 chosen from 1 choice Sep 7 16:57:27 gripir hub 2-0:1.0: USB hub found Sep 7 16:57:27 gripir hub 2-0:1.0: 3 ports detected Sep 7 16:57:27 gripir ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21 Sep 7 16:57:27 gripir ohci_hcd 0000:00:03.1: OHCI Host Controller Sep 7 16:57:27 gripir ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 Sep 7 16:57:27 gripir ohci_hcd 0000:00:03.1: irq 21, io mem 0xe6020000 Sep 7 16:57:27 gripir lp0: using parport0 (interrupt-driven). Sep 7 16:57:27 gripir usb usb3: configuration #1 chosen from 1 choice Sep 7 16:57:27 gripir hub 3-0:1.0: USB hub found Sep 7 16:57:27 gripir hub 3-0:1.0: 3 ports detected Sep 7 16:57:27 gripir Linux video capture interface: v1.00 Sep 7 16:57:27 gripir ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22 Sep 7 16:57:27 gripir ohci_hcd 0000:00:03.2: OHCI Host Controller Sep 7 16:57:27 gripir ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 Sep 7 16:57:27 gripir ohci_hcd 0000:00:03.2: irq 22, io mem 0xe6021000 Sep 7 16:57:27 gripir usb usb4: configuration #1 chosen from 1 choice Sep 7 16:57:27 gripir hub 4-0:1.0: USB hub found Sep 7 16:57:27 gripir hub 4-0:1.0: 2 ports detected Sep 7 16:57:27 gripir saa7130/34: v4l2 driver version 0.2.14 loaded Sep 7 16:57:27 gripir ppdev: user-space parallel port driver Sep 7 16:57:27 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 7 16:57:27 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 7 16:57:27 gripir agpgart: Detected AGP bridge 0 Sep 7 16:57:27 gripir agpgart: AGP aperture is 64M @ 0xe0000000 Sep 7 16:57:27 gripir ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 17 Sep 7 16:57:27 gripir saa7134[0]: found at 0000:00:0d.0, rev: 1, irq: 17, latency: 32, mmio: 0xe6026000 Sep 7 16:57:27 gripir saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected] Sep 7 16:57:27 gripir saa7134[0]: board init: gpio is 0 Sep 7 16:57:27 gripir pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Sep 7 16:57:27 gripir saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9 Sep 7 16:57:27 gripir saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00 Sep 7 16:57:27 gripir saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff Sep 7 16:57:27 gripir saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 7 16:57:27 gripir saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 7 16:57:27 gripir saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 7 16:57:27 gripir saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 7 16:57:27 gripir saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 7 16:57:27 gripir saa7134[0] Tuner type is 38 Sep 7 16:57:27 gripir tuner 0-0060: All bytes are equal. It is not a TEA5767 Sep 7 16:57:27 gripir tuner 0-0060: chip found @ 0xc0 (saa7134[0]) Sep 7 16:57:27 gripir tuner 0-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) Sep 7 16:57:27 gripir usb 2-1: new low speed USB device using ohci_hcd and address 2 Sep 7 16:57:27 gripir tda9887 0-0043: chip found @ 0x86 (saa7134[0]) Sep 7 16:57:27 gripir saa7134[0]: registered device video0 [v4l2] Sep 7 16:57:27 gripir saa7134[0]: registered device vbi0 Sep 7 16:57:27 gripir saa7134[0]: registered device radio0 Sep 7 16:57:27 gripir shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Sep 7 16:57:27 gripir usb 2-1: configuration #1 chosen from 1 choice Sep 7 16:57:27 gripir usb 3-1: new low speed USB device using ohci_hcd and address 2 Sep 7 16:57:27 gripir usb 3-1: configuration #1 chosen from 1 choice Sep 7 16:57:27 gripir usb 4-1: new full speed USB device using ohci_hcd and address 2 Sep 7 16:57:27 gripir usb 4-1: configuration #1 chosen from 1 choice Sep 7 16:57:27 gripir usbcore: registered new driver hiddev Sep 7 16:57:27 gripir input: Microsoft® Office Keyboard as /class/input/input1 Sep 7 16:57:27 gripir input: USB HID v1.10 Keyboard [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 7 16:57:27 gripir input: Microsoft® Office Keyboard as /class/input/input2 Sep 7 16:57:27 gripir input: USB HID v1.10 Device [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 7 16:57:27 gripir input: Logitech USB-PS/2 Optical Mouse as /class/input/input3 Sep 7 16:57:27 gripir input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.1-1 Sep 7 16:57:27 gripir usbcore: registered new driver usbhid Sep 7 16:57:27 gripir drivers/usb/input/hid-core.c: v2.6:USB HID core driver Sep 7 16:57:27 gripir prism2usb_init: prism2_usb.o: 0.2.3 Loaded Sep 7 16:57:27 gripir prism2usb_init: dev_info is: prism2_usb Sep 7 16:57:27 gripir usb 4-1: reset full speed USB device using ohci_hcd and address 2 Sep 7 16:57:27 gripir usbcore: registered new driver prism2_usb Sep 7 16:57:27 gripir NTFS driver 2.1.27 [Flags: R/W MODULE]. Sep 7 16:57:27 gripir NTFS volume version 3.1. Sep 7 16:57:27 gripir kjournald starting. Commit interval 5 seconds Sep 7 16:57:27 gripir EXT3 FS on sda1, internal journal Sep 7 16:57:27 gripir EXT3-fs: mounted filesystem with ordered data mode. Sep 7 16:57:27 gripir Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 across:498004k Sep 7 16:57:28 gripir ident: nic h/w: id=0x8026 1.0.0 Sep 7 16:57:28 gripir ident: pri f/w: id=0x15 1.1.3 Sep 7 16:57:28 gripir ident: sta f/w: id=0x1f 1.7.1 Sep 7 16:57:28 gripir MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1 Sep 7 16:57:28 gripir CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1 Sep 7 16:57:28 gripir PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/4 Sep 7 16:57:28 gripir STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/12 Sep 7 16:57:28 gripir PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 7 16:57:28 gripir STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 7 16:57:28 gripir STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1 Sep 7 16:57:28 gripir Prism2 card SN: 000000000000 Sep 7 16:57:29 gripir linkstatus=CONNECTED Sep 7 16:57:39 gripir NVRM: not using NVAGP, an AGPGART backend is loaded! Sep 7 16:57:57 gripir (gripir-2744): (Version 2.14.0) wird gestartet, Prozesskennung 2744, Benutzer »gripir« Sep 7 16:57:57 gripir (gripir-2744): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 7 16:57:57 gripir (gripir-2744): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 7 16:57:57 gripir (gripir-2744): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 7 16:58:05 gripir (gripir-2744): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 0 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 7 16:58:11 gripir NET: Registered protocol family 10 Sep 7 16:58:11 gripir lo: Disabled Privacy Extensions Sep 7 16:58:11 gripir IPv6 over IPv4 tunneling driver Sep 7 17:41:41 gripir (gripir-2744): Beenden Sep 7 17:41:41 gripir gdm[2682]: Master wird angehalten... Sep 7 17:41:42 gripir shutdown[2682]: shutting down for system halt Sep 7 17:41:42 gripir init: Switching to runlevel: 0 Sep 7 20:28:42 gripir Linux version 2.6.17-ARCH (root@Wohnung) (gcc version 4.1.1) #1 SMP PREEMPT Sat Jul 1 10:16:16 CEST 2006 Sep 7 20:28:42 gripir BIOS-provided physical RAM map: Sep 7 20:28:42 gripir BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Sep 7 20:28:42 gripir BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Sep 7 20:28:42 gripir BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Sep 7 20:28:42 gripir BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) Sep 7 20:28:42 gripir BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) Sep 7 20:28:42 gripir BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) Sep 7 20:28:42 gripir BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Sep 7 20:28:42 gripir BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Sep 7 20:28:42 gripir BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Sep 7 20:28:42 gripir 127MB HIGHMEM available. Sep 7 20:28:42 gripir 896MB LOWMEM available. Sep 7 20:28:42 gripir found SMP MP-table at 000f5570 Sep 7 20:28:42 gripir DMI 2.2 present. Sep 7 20:28:42 gripir ACPI: PM-Timer IO Port: 0x1008 Sep 7 20:28:42 gripir ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Sep 7 20:28:42 gripir Processor #0 15:4 APIC version 16 Sep 7 20:28:42 gripir ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Sep 7 20:28:42 gripir ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Sep 7 20:28:42 gripir IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 Sep 7 20:28:42 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Sep 7 20:28:42 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) Sep 7 20:28:42 gripir Enabling APIC mode: Flat. Using 1 I/O APICs Sep 7 20:28:42 gripir Using ACPI (MADT) for SMP configuration information Sep 7 20:28:42 gripir Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Sep 7 20:28:42 gripir Built 1 zonelists Sep 7 20:28:42 gripir Kernel command line: root=/dev/hda3 ro vga=773 Sep 7 20:28:42 gripir Enabling fast FPU save and restore... done. Sep 7 20:28:42 gripir Enabling unmasked SIMD FPU exception support... done. Sep 7 20:28:42 gripir Initializing CPU#0 Sep 7 20:28:42 gripir PID hash table entries: 4096 (order: 12, 16384 bytes) Sep 7 20:28:42 gripir Detected 1999.786 MHz processor. Sep 7 20:28:42 gripir Using pmtmr for high-res timesource Sep 7 20:28:42 gripir Console: colour dummy device 80x25 Sep 7 20:28:42 gripir Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Sep 7 20:28:42 gripir Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Sep 7 20:28:42 gripir Memory: 1034156k/1048512k available (2409k kernel code, 13576k reserved, 715k data, 240k init, 131008k highmem) Sep 7 20:28:42 gripir Checking if this processor honours the WP bit even in supervisor mode... Ok. Sep 7 20:28:42 gripir Calibrating delay using timer specific routine.. 4001.52 BogoMIPS (lpj=8003044) Sep 7 20:28:42 gripir Security Framework v1.0.0 initialized Sep 7 20:28:42 gripir Mount-cache hash table entries: 512 Sep 7 20:28:42 gripir CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Sep 7 20:28:42 gripir CPU: L2 Cache: 512K (64 bytes/line) Sep 7 20:28:42 gripir Intel machine check architecture supported. Sep 7 20:28:42 gripir Intel machine check reporting enabled on CPU#0. Sep 7 20:28:42 gripir Checking 'hlt' instruction... OK. Sep 7 20:28:42 gripir SMP alternatives: switching to UP code Sep 7 20:28:42 gripir Freeing SMP alternatives: 16k freed Sep 7 20:28:42 gripir checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Sep 7 20:28:42 gripir Freeing initrd memory: 840k freed Sep 7 20:28:42 gripir ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. Sep 7 20:28:42 gripir CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 0a Sep 7 20:28:42 gripir Total of 1 processors activated (4001.52 BogoMIPS). Sep 7 20:28:42 gripir ENABLING IO-APIC IRQs Sep 7 20:28:42 gripir ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Sep 7 20:28:42 gripir Brought up 1 CPUs Sep 7 20:28:42 gripir migration_cost=0 Sep 7 20:28:42 gripir NET: Registered protocol family 16 Sep 7 20:28:42 gripir ACPI: bus type pci registered Sep 7 20:28:42 gripir PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=1 Sep 7 20:28:42 gripir Setting up standard PCI resources Sep 7 20:28:42 gripir ACPI: Subsystem revision 20060127 Sep 7 20:28:42 gripir ACPI: Interpreter enabled Sep 7 20:28:42 gripir ACPI: Using IOAPIC for interrupt routing Sep 7 20:28:42 gripir ACPI: PCI Root Bridge [PCI0] (0000:00) Sep 7 20:28:42 gripir ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Sep 7 20:28:42 gripir ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) Sep 7 20:28:42 gripir ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 7 20:28:42 gripir ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. Sep 7 20:28:42 gripir ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 7 20:28:42 gripir ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 7 20:28:42 gripir ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 7 20:28:42 gripir ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Sep 7 20:28:42 gripir ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) Sep 7 20:28:42 gripir Linux Plug and Play Support v0.97 (c) Adam Belay Sep 7 20:28:42 gripir pnp: PnP ACPI init Sep 7 20:28:42 gripir pnp: PnP ACPI: found 10 devices Sep 7 20:28:42 gripir SCSI subsystem initialized Sep 7 20:28:42 gripir PCI: Using ACPI for IRQ routing Sep 7 20:28:42 gripir PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Sep 7 20:28:42 gripir PCI: Bridge: 0000:00:01.0 Sep 7 20:28:42 gripir IO window: disabled. Sep 7 20:28:42 gripir MEM window: e4000000-e5ffffff Sep 7 20:28:42 gripir PREFETCH window: d0000000-dfffffff Sep 7 20:28:42 gripir NET: Registered protocol family 2 Sep 7 20:28:42 gripir IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Sep 7 20:28:42 gripir TCP established hash table entries: 131072 (order: 8, 1572864 bytes) Sep 7 20:28:42 gripir TCP bind hash table entries: 65536 (order: 7, 786432 bytes) Sep 7 20:28:42 gripir TCP: Hash tables configured (established 131072 bind 65536) Sep 7 20:28:42 gripir TCP reno registered Sep 7 20:28:42 gripir apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) Sep 7 20:28:42 gripir apm: overridden by ACPI. Sep 7 20:28:42 gripir highmem bounce pool size: 64 pages Sep 7 20:28:42 gripir VFS: Disk quotas dquot_6.5.1 Sep 7 20:28:42 gripir Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Sep 7 20:28:42 gripir Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Sep 7 20:28:42 gripir Initializing Cryptographic API Sep 7 20:28:42 gripir io scheduler noop registered Sep 7 20:28:42 gripir io scheduler anticipatory registered (default) Sep 7 20:28:42 gripir io scheduler deadline registered Sep 7 20:28:42 gripir io scheduler cfq registered Sep 7 20:28:42 gripir vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 262144k Sep 7 20:28:42 gripir vesafb: mode is 1024x768x8, linelength=1024, pages=3 Sep 7 20:28:42 gripir vesafb: protected mode interface info at c000:e2e0 Sep 7 20:28:42 gripir vesafb: scrolling: redraw Sep 7 20:28:42 gripir vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Sep 7 20:28:42 gripir Console: switching to colour frame buffer device 128x48 Sep 7 20:28:42 gripir fb0: VESA VGA frame buffer device Sep 7 20:28:42 gripir ACPI: Power Button (FF) [PWRF] Sep 7 20:28:42 gripir ACPI: Power Button (CM) [PWRB] Sep 7 20:28:42 gripir ACPI: Sleep Button (CM) [FUTS] Sep 7 20:28:42 gripir ACPI: Fan [FAN] (on) Sep 7 20:28:42 gripir ACPI: Thermal Zone [THRM] (40 C) Sep 7 20:28:42 gripir isapnp: Scanning for PnP cards... Sep 7 20:28:42 gripir isapnp: No Plug & Play device found Sep 7 20:28:42 gripir Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled Sep 7 20:28:42 gripir serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 7 20:28:42 gripir 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 7 20:28:42 gripir Floppy drive(s): fd0 is 1.44M Sep 7 20:28:42 gripir FDC 0 is a post-1991 82077 Sep 7 20:28:42 gripir RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Sep 7 20:28:42 gripir loop: loaded (max 8 devices) Sep 7 20:28:42 gripir PNP: No PS/2 controller found. Probing ports directly. Sep 7 20:28:42 gripir serio: i8042 AUX port at 0x60,0x64 irq 12 Sep 7 20:28:42 gripir serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 7 20:28:42 gripir mice: PS/2 mouse device common for all mice Sep 7 20:28:42 gripir TCP bic registered Sep 7 20:28:42 gripir NET: Registered protocol family 1 Sep 7 20:28:42 gripir NET: Registered protocol family 17 Sep 7 20:28:42 gripir Using IPI No-Shortcut mode Sep 7 20:28:42 gripir ACPI wakeup devices: Sep 7 20:28:42 gripir FUTS PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 Sep 7 20:28:42 gripir ACPI: (supports S0 S1 S4 S5) Sep 7 20:28:42 gripir RAMDISK: Compressed image found at block 0 Sep 7 20:28:42 gripir VFS: Mounted root (ext2 filesystem). Sep 7 20:28:42 gripir Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Sep 7 20:28:42 gripir ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Sep 7 20:28:42 gripir SIS5513: IDE controller at PCI slot 0000:00:02.5 Sep 7 20:28:42 gripir SIS5513: chipset revision 1 Sep 7 20:28:42 gripir SIS5513: not 100% native mode: will probe irqs later Sep 7 20:28:42 gripir SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller Sep 7 20:28:42 gripir ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio Sep 7 20:28:42 gripir ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio Sep 7 20:28:42 gripir hda: ST340810A, ATA DISK drive Sep 7 20:28:42 gripir ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Sep 7 20:28:42 gripir hdc: CD-950E/TKU, ATAPI CD/DVD-ROM drive Sep 7 20:28:42 gripir hdd: AOPEN DUW1616/ARR, ATAPI CD/DVD-ROM drive Sep 7 20:28:42 gripir ide1 at 0x170-0x177,0x376 on irq 15 Sep 7 20:28:42 gripir hda: max request size: 128KiB Sep 7 20:28:42 gripir hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) Sep 7 20:28:42 gripir hda: cache flushes not supported Sep 7 20:28:42 gripir hda: hda1 hda2 hda3 Sep 7 20:28:42 gripir ide-floppy driver 0.99.newide Sep 7 20:28:42 gripir sata_sis 0000:00:05.0: version 0.5 Sep 7 20:28:42 gripir ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 7 20:28:42 gripir sata_sis 0000:00:05.0: Detected SiS 180/181 chipset in SATA mode Sep 7 20:28:42 gripir ata1: SATA max UDMA/133 cmd 0xE100 ctl 0xE202 bmdma 0xE500 irq 16 Sep 7 20:28:42 gripir ata2: SATA max UDMA/133 cmd 0xE300 ctl 0xE402 bmdma 0xE508 irq 16 Sep 7 20:28:42 gripir ata1: SATA link up 1.5 Gbps (SStatus 113) Sep 7 20:28:42 gripir ata1: dev 0 ATA-6, max UDMA/100, 321672960 sectors: LBA48 Sep 7 20:28:42 gripir ata1: dev 0 configured for UDMA/100 Sep 7 20:28:42 gripir scsi0 : sata_sis Sep 7 20:28:42 gripir ata2: SATA link down (SStatus 0) Sep 7 20:28:42 gripir scsi1 : sata_sis Sep 7 20:28:42 gripir Vendor: ATA Model: HDS722516VLSA80 Rev: V34O Sep 7 20:28:42 gripir Type: Direct-Access ANSI SCSI revision: 05 Sep 7 20:28:42 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 7 20:28:42 gripir sda: Write Protect is off Sep 7 20:28:42 gripir SCSI device sda: drive cache: write back Sep 7 20:28:42 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 7 20:28:42 gripir sda: Write Protect is off Sep 7 20:28:42 gripir SCSI device sda: drive cache: write back Sep 7 20:28:42 gripir sda: sda1 Sep 7 20:28:42 gripir sd 0:0:0:0: Attached scsi disk sda Sep 7 20:28:42 gripir ReiserFS: hda3: found reiserfs format "3.6" with standard journal Sep 7 20:28:42 gripir ReiserFS: hda3: using ordered data mode Sep 7 20:28:42 gripir ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Sep 7 20:28:42 gripir ReiserFS: hda3: checking transaction log (hda3) Sep 7 20:28:42 gripir ReiserFS: hda3: Using r5 hash to sort names Sep 7 20:28:42 gripir Freeing unused kernel memory: 240k freed Sep 7 20:28:42 gripir usbcore: registered new driver usbfs Sep 7 20:28:42 gripir usbcore: registered new driver hub Sep 7 20:28:42 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 7 20:28:42 gripir ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 7 20:28:42 gripir hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) Sep 7 20:28:42 gripir Uniform CD-ROM driver Revision: 3.20 Sep 7 20:28:42 gripir parport: PnPBIOS parport detected. Sep 7 20:28:42 gripir parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] Sep 7 20:28:42 gripir Real Time Clock Driver v1.12ac Sep 7 20:28:42 gripir hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Sep 7 20:28:42 gripir Linux agpgart interface v0.101 (c) Dave Jones Sep 7 20:28:42 gripir CSLIP: code copyright 1989 Regents of the University of California Sep 7 20:28:42 gripir PPP generic driver version 2.4.2 Sep 7 20:28:42 gripir input: PC Speaker as /class/input/input0 Sep 7 20:28:42 gripir nvidia: module license 'NVIDIA' taints kernel. Sep 7 20:28:42 gripir ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17 Sep 7 20:28:42 gripir NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774 Tue Aug 1 20:54:08 PDT 2006 Sep 7 20:28:42 gripir sis900.c: v1.08.09 Sep. 19 2005 Sep 7 20:28:42 gripir ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 18 Sep 7 20:28:42 gripir 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. Sep 7 20:28:42 gripir 0000:00:04.0: Using transceiver found at address 1 as default Sep 7 20:28:42 gripir eth0: SiS 900 PCI Fast Ethernet at 0xe000, IRQ 18, 00:11:5b:4a:0d:e2. Sep 7 20:28:42 gripir gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xe800, speed 1217kHz Sep 7 20:28:42 gripir ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 19 Sep 7 20:28:42 gripir ehci_hcd 0000:00:03.3: EHCI Host Controller Sep 7 20:28:42 gripir ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 Sep 7 20:28:42 gripir ehci_hcd 0000:00:03.3: irq 19, io mem 0xe6022000 Sep 7 20:28:42 gripir ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Sep 7 20:28:42 gripir usb usb1: configuration #1 chosen from 1 choice Sep 7 20:28:42 gripir hub 1-0:1.0: USB hub found Sep 7 20:28:42 gripir hub 1-0:1.0: 8 ports detected Sep 7 20:28:42 gripir ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20 Sep 7 20:28:42 gripir ohci_hcd 0000:00:03.0: OHCI Host Controller Sep 7 20:28:42 gripir ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 Sep 7 20:28:42 gripir ohci_hcd 0000:00:03.0: irq 20, io mem 0xe6024000 Sep 7 20:28:42 gripir Linux video capture interface: v1.00 Sep 7 20:28:42 gripir usb usb2: configuration #1 chosen from 1 choice Sep 7 20:28:42 gripir hub 2-0:1.0: USB hub found Sep 7 20:28:42 gripir hub 2-0:1.0: 3 ports detected Sep 7 20:28:42 gripir ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21 Sep 7 20:28:42 gripir ohci_hcd 0000:00:03.1: OHCI Host Controller Sep 7 20:28:42 gripir ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 Sep 7 20:28:42 gripir ohci_hcd 0000:00:03.1: irq 21, io mem 0xe6020000 Sep 7 20:28:42 gripir usb usb3: configuration #1 chosen from 1 choice Sep 7 20:28:42 gripir hub 3-0:1.0: USB hub found Sep 7 20:28:42 gripir hub 3-0:1.0: 3 ports detected Sep 7 20:28:42 gripir saa7130/34: v4l2 driver version 0.2.14 loaded Sep 7 20:28:42 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 7 20:28:42 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 7 20:28:42 gripir ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22 Sep 7 20:28:42 gripir ohci_hcd 0000:00:03.2: OHCI Host Controller Sep 7 20:28:42 gripir ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 Sep 7 20:28:42 gripir ohci_hcd 0000:00:03.2: irq 22, io mem 0xe6021000 Sep 7 20:28:42 gripir lp0: using parport0 (interrupt-driven). Sep 7 20:28:42 gripir usb usb4: configuration #1 chosen from 1 choice Sep 7 20:28:42 gripir hub 4-0:1.0: USB hub found Sep 7 20:28:42 gripir hub 4-0:1.0: 2 ports detected Sep 7 20:28:42 gripir agpgart: Detected AGP bridge 0 Sep 7 20:28:42 gripir agpgart: AGP aperture is 64M @ 0xe0000000 Sep 7 20:28:42 gripir ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 18 Sep 7 20:28:42 gripir saa7134[0]: found at 0000:00:0d.0, rev: 1, irq: 18, latency: 32, mmio: 0xe6026000 Sep 7 20:28:42 gripir saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected] Sep 7 20:28:42 gripir saa7134[0]: board init: gpio is 0 Sep 7 20:28:42 gripir ppdev: user-space parallel port driver Sep 7 20:28:42 gripir saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9 Sep 7 20:28:42 gripir saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00 Sep 7 20:28:42 gripir saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff Sep 7 20:28:42 gripir saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 7 20:28:42 gripir saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 7 20:28:42 gripir saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 7 20:28:42 gripir saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 7 20:28:42 gripir saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 7 20:28:42 gripir saa7134[0] Tuner type is 38 Sep 7 20:28:42 gripir pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Sep 7 20:28:42 gripir usb 2-1: new low speed USB device using ohci_hcd and address 2 Sep 7 20:28:42 gripir tuner 0-0060: All bytes are equal. It is not a TEA5767 Sep 7 20:28:42 gripir tuner 0-0060: chip found @ 0xc0 (saa7134[0]) Sep 7 20:28:42 gripir tuner 0-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) Sep 7 20:28:42 gripir tda9887 0-0043: chip found @ 0x86 (saa7134[0]) Sep 7 20:28:42 gripir usb 2-1: configuration #1 chosen from 1 choice Sep 7 20:28:42 gripir saa7134[0]: registered device video0 [v4l2] Sep 7 20:28:42 gripir saa7134[0]: registered device vbi0 Sep 7 20:28:42 gripir saa7134[0]: registered device radio0 Sep 7 20:28:42 gripir shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Sep 7 20:28:42 gripir usb 3-1: new low speed USB device using ohci_hcd and address 2 Sep 7 20:28:42 gripir usb 3-1: configuration #1 chosen from 1 choice Sep 7 20:28:42 gripir usb 4-1: new full speed USB device using ohci_hcd and address 2 Sep 7 20:28:42 gripir usb 4-1: configuration #1 chosen from 1 choice Sep 7 20:28:42 gripir usbcore: registered new driver hiddev Sep 7 20:28:42 gripir input: Microsoft® Office Keyboard as /class/input/input1 Sep 7 20:28:42 gripir input: USB HID v1.10 Keyboard [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 7 20:28:42 gripir input: Microsoft® Office Keyboard as /class/input/input2 Sep 7 20:28:42 gripir input: USB HID v1.10 Device [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 7 20:28:42 gripir input: Logitech USB-PS/2 Optical Mouse as /class/input/input3 Sep 7 20:28:42 gripir input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.1-1 Sep 7 20:28:42 gripir usbcore: registered new driver usbhid Sep 7 20:28:42 gripir drivers/usb/input/hid-core.c: v2.6:USB HID core driver Sep 7 20:28:42 gripir prism2usb_init: prism2_usb.o: 0.2.3 Loaded Sep 7 20:28:42 gripir prism2usb_init: dev_info is: prism2_usb Sep 7 20:28:42 gripir usb 4-1: reset full speed USB device using ohci_hcd and address 2 Sep 7 20:28:42 gripir usbcore: registered new driver prism2_usb Sep 7 20:28:42 gripir NTFS driver 2.1.27 [Flags: R/W MODULE]. Sep 7 20:28:42 gripir NTFS volume version 3.1. Sep 7 20:28:42 gripir kjournald starting. Commit interval 5 seconds Sep 7 20:28:42 gripir EXT3 FS on sda1, internal journal Sep 7 20:28:42 gripir EXT3-fs: mounted filesystem with ordered data mode. Sep 7 20:28:42 gripir Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 across:498004k Sep 7 20:28:43 gripir ident: nic h/w: id=0x8026 1.0.0 Sep 7 20:28:43 gripir ident: pri f/w: id=0x15 1.1.3 Sep 7 20:28:43 gripir ident: sta f/w: id=0x1f 1.7.1 Sep 7 20:28:43 gripir MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1 Sep 7 20:28:43 gripir CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1 Sep 7 20:28:43 gripir PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/4 Sep 7 20:28:43 gripir STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/12 Sep 7 20:28:43 gripir PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 7 20:28:43 gripir STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 7 20:28:43 gripir STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1 Sep 7 20:28:43 gripir Prism2 card SN: 000000000000 Sep 7 20:28:44 gripir linkstatus=CONNECTED Sep 7 20:28:54 gripir NVRM: not using NVAGP, an AGPGART backend is loaded! Sep 7 20:29:17 gripir (gripir-2742): (Version 2.14.0) wird gestartet, Prozesskennung 2742, Benutzer »gripir« Sep 7 20:29:17 gripir (gripir-2742): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 7 20:29:17 gripir (gripir-2742): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 7 20:29:17 gripir (gripir-2742): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 7 20:29:24 gripir (gripir-2742): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 0 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 7 20:29:31 gripir NET: Registered protocol family 10 Sep 7 20:29:31 gripir lo: Disabled Privacy Extensions Sep 7 20:29:31 gripir IPv6 over IPv4 tunneling driver Sep 7 20:58:21 gripir NET: Registered protocol family 4 Sep 7 22:27:05 gripir (gripir-2742): Beenden Sep 7 22:27:05 gripir gdm[2680]: Master wird angehalten... Sep 7 22:27:06 gripir shutdown[2680]: shutting down for system halt Sep 7 22:27:06 gripir init: Switching to runlevel: 0 Sep 8 13:54:38 gripir Linux version 2.6.17-ARCH (root@Wohnung) (gcc version 4.1.1) #1 SMP PREEMPT Sat Jul 1 10:16:16 CEST 2006 Sep 8 13:54:38 gripir BIOS-provided physical RAM map: Sep 8 13:54:38 gripir BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Sep 8 13:54:38 gripir BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Sep 8 13:54:38 gripir BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Sep 8 13:54:38 gripir BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) Sep 8 13:54:38 gripir BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) Sep 8 13:54:38 gripir BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) Sep 8 13:54:38 gripir BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Sep 8 13:54:38 gripir BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Sep 8 13:54:38 gripir BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Sep 8 13:54:38 gripir 127MB HIGHMEM available. Sep 8 13:54:38 gripir 896MB LOWMEM available. Sep 8 13:54:38 gripir found SMP MP-table at 000f5570 Sep 8 13:54:38 gripir DMI 2.2 present. Sep 8 13:54:38 gripir ACPI: PM-Timer IO Port: 0x1008 Sep 8 13:54:38 gripir ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Sep 8 13:54:38 gripir Processor #0 15:4 APIC version 16 Sep 8 13:54:38 gripir ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Sep 8 13:54:38 gripir ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Sep 8 13:54:38 gripir IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 Sep 8 13:54:38 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Sep 8 13:54:38 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) Sep 8 13:54:38 gripir Enabling APIC mode: Flat. Using 1 I/O APICs Sep 8 13:54:38 gripir Using ACPI (MADT) for SMP configuration information Sep 8 13:54:38 gripir Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Sep 8 13:54:38 gripir Built 1 zonelists Sep 8 13:54:38 gripir Kernel command line: root=/dev/hda3 ro vga=773 Sep 8 13:54:38 gripir Enabling fast FPU save and restore... done. Sep 8 13:54:38 gripir Enabling unmasked SIMD FPU exception support... done. Sep 8 13:54:38 gripir Initializing CPU#0 Sep 8 13:54:38 gripir PID hash table entries: 4096 (order: 12, 16384 bytes) Sep 8 13:54:38 gripir Detected 1999.615 MHz processor. Sep 8 13:54:38 gripir Using pmtmr for high-res timesource Sep 8 13:54:38 gripir Console: colour dummy device 80x25 Sep 8 13:54:38 gripir Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Sep 8 13:54:38 gripir Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Sep 8 13:54:38 gripir Memory: 1034156k/1048512k available (2409k kernel code, 13576k reserved, 715k data, 240k init, 131008k highmem) Sep 8 13:54:38 gripir Checking if this processor honours the WP bit even in supervisor mode... Ok. Sep 8 13:54:38 gripir Calibrating delay using timer specific routine.. 4001.51 BogoMIPS (lpj=8003033) Sep 8 13:54:38 gripir Security Framework v1.0.0 initialized Sep 8 13:54:38 gripir Mount-cache hash table entries: 512 Sep 8 13:54:38 gripir CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Sep 8 13:54:38 gripir CPU: L2 Cache: 512K (64 bytes/line) Sep 8 13:54:38 gripir Intel machine check architecture supported. Sep 8 13:54:38 gripir Intel machine check reporting enabled on CPU#0. Sep 8 13:54:38 gripir Checking 'hlt' instruction... OK. Sep 8 13:54:38 gripir SMP alternatives: switching to UP code Sep 8 13:54:38 gripir Freeing SMP alternatives: 16k freed Sep 8 13:54:38 gripir checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Sep 8 13:54:38 gripir Freeing initrd memory: 840k freed Sep 8 13:54:38 gripir ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. Sep 8 13:54:38 gripir CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 0a Sep 8 13:54:38 gripir Total of 1 processors activated (4001.51 BogoMIPS). Sep 8 13:54:38 gripir ENABLING IO-APIC IRQs Sep 8 13:54:38 gripir ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Sep 8 13:54:38 gripir Brought up 1 CPUs Sep 8 13:54:38 gripir migration_cost=0 Sep 8 13:54:38 gripir NET: Registered protocol family 16 Sep 8 13:54:38 gripir ACPI: bus type pci registered Sep 8 13:54:38 gripir PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=1 Sep 8 13:54:38 gripir Setting up standard PCI resources Sep 8 13:54:38 gripir ACPI: Subsystem revision 20060127 Sep 8 13:54:38 gripir ACPI: Interpreter enabled Sep 8 13:54:38 gripir ACPI: Using IOAPIC for interrupt routing Sep 8 13:54:38 gripir ACPI: PCI Root Bridge [PCI0] (0000:00) Sep 8 13:54:38 gripir ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Sep 8 13:54:38 gripir ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) Sep 8 13:54:38 gripir ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 8 13:54:38 gripir ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. Sep 8 13:54:38 gripir ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 8 13:54:38 gripir ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 8 13:54:38 gripir ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 8 13:54:38 gripir ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Sep 8 13:54:38 gripir ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) Sep 8 13:54:38 gripir Linux Plug and Play Support v0.97 (c) Adam Belay Sep 8 13:54:38 gripir pnp: PnP ACPI init Sep 8 13:54:38 gripir pnp: PnP ACPI: found 10 devices Sep 8 13:54:38 gripir SCSI subsystem initialized Sep 8 13:54:38 gripir PCI: Using ACPI for IRQ routing Sep 8 13:54:38 gripir PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Sep 8 13:54:38 gripir PCI: Bridge: 0000:00:01.0 Sep 8 13:54:38 gripir IO window: disabled. Sep 8 13:54:38 gripir MEM window: e4000000-e5ffffff Sep 8 13:54:38 gripir PREFETCH window: d0000000-dfffffff Sep 8 13:54:38 gripir NET: Registered protocol family 2 Sep 8 13:54:38 gripir IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Sep 8 13:54:38 gripir TCP established hash table entries: 131072 (order: 8, 1572864 bytes) Sep 8 13:54:38 gripir TCP bind hash table entries: 65536 (order: 7, 786432 bytes) Sep 8 13:54:38 gripir TCP: Hash tables configured (established 131072 bind 65536) Sep 8 13:54:38 gripir TCP reno registered Sep 8 13:54:38 gripir apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) Sep 8 13:54:38 gripir apm: overridden by ACPI. Sep 8 13:54:38 gripir highmem bounce pool size: 64 pages Sep 8 13:54:38 gripir VFS: Disk quotas dquot_6.5.1 Sep 8 13:54:38 gripir Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Sep 8 13:54:38 gripir Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Sep 8 13:54:38 gripir Initializing Cryptographic API Sep 8 13:54:38 gripir io scheduler noop registered Sep 8 13:54:38 gripir io scheduler anticipatory registered (default) Sep 8 13:54:38 gripir io scheduler deadline registered Sep 8 13:54:38 gripir io scheduler cfq registered Sep 8 13:54:38 gripir vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 262144k Sep 8 13:54:38 gripir vesafb: mode is 1024x768x8, linelength=1024, pages=3 Sep 8 13:54:38 gripir vesafb: protected mode interface info at c000:e2e0 Sep 8 13:54:38 gripir vesafb: scrolling: redraw Sep 8 13:54:38 gripir vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Sep 8 13:54:38 gripir Console: switching to colour frame buffer device 128x48 Sep 8 13:54:38 gripir fb0: VESA VGA frame buffer device Sep 8 13:54:38 gripir ACPI: Power Button (FF) [PWRF] Sep 8 13:54:38 gripir ACPI: Power Button (CM) [PWRB] Sep 8 13:54:38 gripir ACPI: Sleep Button (CM) [FUTS] Sep 8 13:54:38 gripir ACPI: Fan [FAN] (on) Sep 8 13:54:38 gripir ACPI: Thermal Zone [THRM] (40 C) Sep 8 13:54:38 gripir isapnp: Scanning for PnP cards... Sep 8 13:54:38 gripir isapnp: No Plug & Play device found Sep 8 13:54:38 gripir Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled Sep 8 13:54:38 gripir serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 8 13:54:38 gripir 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 8 13:54:38 gripir Floppy drive(s): fd0 is 1.44M Sep 8 13:54:38 gripir FDC 0 is a post-1991 82077 Sep 8 13:54:38 gripir RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Sep 8 13:54:38 gripir loop: loaded (max 8 devices) Sep 8 13:54:38 gripir PNP: No PS/2 controller found. Probing ports directly. Sep 8 13:54:38 gripir serio: i8042 AUX port at 0x60,0x64 irq 12 Sep 8 13:54:38 gripir serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 8 13:54:38 gripir mice: PS/2 mouse device common for all mice Sep 8 13:54:38 gripir TCP bic registered Sep 8 13:54:38 gripir NET: Registered protocol family 1 Sep 8 13:54:38 gripir NET: Registered protocol family 17 Sep 8 13:54:38 gripir Using IPI No-Shortcut mode Sep 8 13:54:38 gripir ACPI wakeup devices: Sep 8 13:54:38 gripir FUTS PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 Sep 8 13:54:38 gripir ACPI: (supports S0 S1 S4 S5) Sep 8 13:54:38 gripir RAMDISK: Compressed image found at block 0 Sep 8 13:54:38 gripir VFS: Mounted root (ext2 filesystem). Sep 8 13:54:38 gripir Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Sep 8 13:54:38 gripir ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Sep 8 13:54:38 gripir SIS5513: IDE controller at PCI slot 0000:00:02.5 Sep 8 13:54:38 gripir SIS5513: chipset revision 1 Sep 8 13:54:38 gripir SIS5513: not 100% native mode: will probe irqs later Sep 8 13:54:38 gripir SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller Sep 8 13:54:38 gripir ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio Sep 8 13:54:38 gripir ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio Sep 8 13:54:38 gripir hda: ST340810A, ATA DISK drive Sep 8 13:54:38 gripir ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Sep 8 13:54:38 gripir hdc: CD-950E/TKU, ATAPI CD/DVD-ROM drive Sep 8 13:54:38 gripir hdd: AOPEN DUW1616/ARR, ATAPI CD/DVD-ROM drive Sep 8 13:54:38 gripir ide1 at 0x170-0x177,0x376 on irq 15 Sep 8 13:54:38 gripir hda: max request size: 128KiB Sep 8 13:54:38 gripir hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) Sep 8 13:54:38 gripir hda: cache flushes not supported Sep 8 13:54:38 gripir hda: hda1 hda2 hda3 Sep 8 13:54:38 gripir ide-floppy driver 0.99.newide Sep 8 13:54:38 gripir sata_sis 0000:00:05.0: version 0.5 Sep 8 13:54:38 gripir ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 8 13:54:38 gripir sata_sis 0000:00:05.0: Detected SiS 180/181 chipset in SATA mode Sep 8 13:54:38 gripir ata1: SATA max UDMA/133 cmd 0xE100 ctl 0xE202 bmdma 0xE500 irq 16 Sep 8 13:54:38 gripir ata2: SATA max UDMA/133 cmd 0xE300 ctl 0xE402 bmdma 0xE508 irq 16 Sep 8 13:54:38 gripir ata1: SATA link up 1.5 Gbps (SStatus 113) Sep 8 13:54:38 gripir ata1: dev 0 ATA-6, max UDMA/100, 321672960 sectors: LBA48 Sep 8 13:54:38 gripir ata1: dev 0 configured for UDMA/100 Sep 8 13:54:38 gripir scsi0 : sata_sis Sep 8 13:54:38 gripir ata2: SATA link down (SStatus 0) Sep 8 13:54:38 gripir scsi1 : sata_sis Sep 8 13:54:38 gripir Vendor: ATA Model: HDS722516VLSA80 Rev: V34O Sep 8 13:54:38 gripir Type: Direct-Access ANSI SCSI revision: 05 Sep 8 13:54:38 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 8 13:54:38 gripir sda: Write Protect is off Sep 8 13:54:38 gripir SCSI device sda: drive cache: write back Sep 8 13:54:38 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 8 13:54:38 gripir sda: Write Protect is off Sep 8 13:54:38 gripir SCSI device sda: drive cache: write back Sep 8 13:54:38 gripir sda: sda1 Sep 8 13:54:38 gripir sd 0:0:0:0: Attached scsi disk sda Sep 8 13:54:38 gripir ReiserFS: hda3: found reiserfs format "3.6" with standard journal Sep 8 13:54:38 gripir ReiserFS: hda3: using ordered data mode Sep 8 13:54:38 gripir ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Sep 8 13:54:38 gripir ReiserFS: hda3: checking transaction log (hda3) Sep 8 13:54:38 gripir ReiserFS: hda3: Using r5 hash to sort names Sep 8 13:54:38 gripir Freeing unused kernel memory: 240k freed Sep 8 13:54:38 gripir usbcore: registered new driver usbfs Sep 8 13:54:38 gripir usbcore: registered new driver hub Sep 8 13:54:38 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 8 13:54:38 gripir ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 8 13:54:38 gripir hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) Sep 8 13:54:38 gripir Uniform CD-ROM driver Revision: 3.20 Sep 8 13:54:38 gripir Real Time Clock Driver v1.12ac Sep 8 13:54:38 gripir ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 17 Sep 8 13:54:38 gripir ehci_hcd 0000:00:03.3: EHCI Host Controller Sep 8 13:54:38 gripir ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 Sep 8 13:54:38 gripir ehci_hcd 0000:00:03.3: irq 17, io mem 0xe6022000 Sep 8 13:54:38 gripir ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Sep 8 13:54:38 gripir usb usb1: configuration #1 chosen from 1 choice Sep 8 13:54:38 gripir hub 1-0:1.0: USB hub found Sep 8 13:54:38 gripir hub 1-0:1.0: 8 ports detected Sep 8 13:54:38 gripir input: PC Speaker as /class/input/input0 Sep 8 13:54:38 gripir CSLIP: code copyright 1989 Regents of the University of California Sep 8 13:54:38 gripir PPP generic driver version 2.4.2 Sep 8 13:54:38 gripir parport: PnPBIOS parport detected. Sep 8 13:54:38 gripir parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] Sep 8 13:54:38 gripir hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Sep 8 13:54:38 gripir Linux video capture interface: v1.00 Sep 8 13:54:38 gripir Linux agpgart interface v0.101 (c) Dave Jones Sep 8 13:54:38 gripir sis900.c: v1.08.09 Sep. 19 2005 Sep 8 13:54:38 gripir ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 18 Sep 8 13:54:38 gripir 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. Sep 8 13:54:38 gripir 0000:00:04.0: Using transceiver found at address 1 as default Sep 8 13:54:38 gripir eth0: SiS 900 PCI Fast Ethernet at 0xe000, IRQ 18, 00:11:5b:4a:0d:e2. Sep 8 13:54:38 gripir ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 19 Sep 8 13:54:38 gripir ohci_hcd 0000:00:03.0: OHCI Host Controller Sep 8 13:54:38 gripir ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 Sep 8 13:54:38 gripir ohci_hcd 0000:00:03.0: irq 19, io mem 0xe6024000 Sep 8 13:54:38 gripir usb usb2: configuration #1 chosen from 1 choice Sep 8 13:54:38 gripir hub 2-0:1.0: USB hub found Sep 8 13:54:38 gripir hub 2-0:1.0: 3 ports detected Sep 8 13:54:38 gripir ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 20 Sep 8 13:54:38 gripir ohci_hcd 0000:00:03.1: OHCI Host Controller Sep 8 13:54:38 gripir ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 Sep 8 13:54:38 gripir ohci_hcd 0000:00:03.1: irq 20, io mem 0xe6020000 Sep 8 13:54:38 gripir saa7130/34: v4l2 driver version 0.2.14 loaded Sep 8 13:54:38 gripir usb usb3: configuration #1 chosen from 1 choice Sep 8 13:54:38 gripir hub 3-0:1.0: USB hub found Sep 8 13:54:38 gripir hub 3-0:1.0: 3 ports detected Sep 8 13:54:38 gripir ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 21 Sep 8 13:54:38 gripir ohci_hcd 0000:00:03.2: OHCI Host Controller Sep 8 13:54:38 gripir ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 Sep 8 13:54:38 gripir ohci_hcd 0000:00:03.2: irq 21, io mem 0xe6021000 Sep 8 13:54:38 gripir usb usb4: configuration #1 chosen from 1 choice Sep 8 13:54:38 gripir hub 4-0:1.0: USB hub found Sep 8 13:54:38 gripir hub 4-0:1.0: 2 ports detected Sep 8 13:54:38 gripir agpgart: Detected AGP bridge 0 Sep 8 13:54:38 gripir agpgart: AGP aperture is 64M @ 0xe0000000 Sep 8 13:54:38 gripir ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 18 Sep 8 13:54:38 gripir saa7134[0]: found at 0000:00:0d.0, rev: 1, irq: 18, latency: 32, mmio: 0xe6026000 Sep 8 13:54:38 gripir saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected] Sep 8 13:54:38 gripir saa7134[0]: board init: gpio is 0 Sep 8 13:54:38 gripir saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9 Sep 8 13:54:38 gripir saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00 Sep 8 13:54:38 gripir saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff Sep 8 13:54:38 gripir saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 8 13:54:38 gripir saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 8 13:54:38 gripir saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 8 13:54:38 gripir saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 8 13:54:38 gripir saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 8 13:54:38 gripir usb 2-1: new low speed USB device using ohci_hcd and address 2 Sep 8 13:54:38 gripir saa7134[0] Tuner type is 38 Sep 8 13:54:38 gripir nvidia: module license 'NVIDIA' taints kernel. Sep 8 13:54:38 gripir usb 2-1: configuration #1 chosen from 1 choice Sep 8 13:54:38 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 8 13:54:38 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 8 13:54:38 gripir tuner 0-0060: All bytes are equal. It is not a TEA5767 Sep 8 13:54:38 gripir tuner 0-0060: chip found @ 0xc0 (saa7134[0]) Sep 8 13:54:38 gripir tuner 0-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) Sep 8 13:54:38 gripir lp0: using parport0 (interrupt-driven). Sep 8 13:54:38 gripir usb 3-1: new low speed USB device using ohci_hcd and address 2 Sep 8 13:54:38 gripir tda9887 0-0043: chip found @ 0x86 (saa7134[0]) Sep 8 13:54:38 gripir usb 3-1: configuration #1 chosen from 1 choice Sep 8 13:54:38 gripir saa7134[0]: registered device video0 [v4l2] Sep 8 13:54:38 gripir saa7134[0]: registered device vbi0 Sep 8 13:54:38 gripir saa7134[0]: registered device radio0 Sep 8 13:54:38 gripir ppdev: user-space parallel port driver Sep 8 13:54:38 gripir usb 4-1: new full speed USB device using ohci_hcd and address 2 Sep 8 13:54:38 gripir usb 4-1: configuration #1 chosen from 1 choice Sep 8 13:54:38 gripir ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 22 Sep 8 13:54:38 gripir NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774 Tue Aug 1 20:54:08 PDT 2006 Sep 8 13:54:38 gripir gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xe800, speed 1242kHz Sep 8 13:54:38 gripir usbcore: registered new driver hiddev Sep 8 13:54:38 gripir input: Microsoft® Office Keyboard as /class/input/input1 Sep 8 13:54:38 gripir input: USB HID v1.10 Keyboard [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 8 13:54:38 gripir input: Microsoft® Office Keyboard as /class/input/input2 Sep 8 13:54:38 gripir input: USB HID v1.10 Device [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 8 13:54:38 gripir input: Logitech USB-PS/2 Optical Mouse as /class/input/input3 Sep 8 13:54:38 gripir input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.1-1 Sep 8 13:54:38 gripir usbcore: registered new driver usbhid Sep 8 13:54:38 gripir drivers/usb/input/hid-core.c: v2.6:USB HID core driver Sep 8 13:54:38 gripir pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Sep 8 13:54:38 gripir shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Sep 8 13:54:38 gripir prism2usb_init: prism2_usb.o: 0.2.3 Loaded Sep 8 13:54:38 gripir prism2usb_init: dev_info is: prism2_usb Sep 8 13:54:38 gripir usb 4-1: reset full speed USB device using ohci_hcd and address 2 Sep 8 13:54:38 gripir usbcore: registered new driver prism2_usb Sep 8 13:54:38 gripir NTFS driver 2.1.27 [Flags: R/W MODULE]. Sep 8 13:54:38 gripir NTFS volume version 3.1. Sep 8 13:54:39 gripir kjournald starting. Commit interval 5 seconds Sep 8 13:54:39 gripir EXT3 FS on sda1, internal journal Sep 8 13:54:39 gripir EXT3-fs: mounted filesystem with ordered data mode. Sep 8 13:54:39 gripir Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 across:498004k Sep 8 13:54:39 gripir ident: nic h/w: id=0x8026 1.0.0 Sep 8 13:54:39 gripir ident: pri f/w: id=0x15 1.1.3 Sep 8 13:54:39 gripir ident: sta f/w: id=0x1f 1.7.1 Sep 8 13:54:39 gripir MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1 Sep 8 13:54:39 gripir CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1 Sep 8 13:54:39 gripir PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/4 Sep 8 13:54:39 gripir STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/12 Sep 8 13:54:39 gripir PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 8 13:54:39 gripir STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 8 13:54:39 gripir STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1 Sep 8 13:54:39 gripir Prism2 card SN: 000000000000 Sep 8 13:54:40 gripir linkstatus=CONNECTED Sep 8 13:54:50 gripir NVRM: not using NVAGP, an AGPGART backend is loaded! Sep 8 13:55:09 gripir (gripir-2741): (Version 2.14.0) wird gestartet, Prozesskennung 2741, Benutzer »gripir« Sep 8 13:55:09 gripir (gripir-2741): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 8 13:55:09 gripir (gripir-2741): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 8 13:55:09 gripir (gripir-2741): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 8 13:55:16 gripir (gripir-2741): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 0 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 8 13:55:21 gripir NET: Registered protocol family 10 Sep 8 13:55:21 gripir lo: Disabled Privacy Extensions Sep 8 13:55:21 gripir IPv6 over IPv4 tunneling driver Sep 8 13:56:02 gripir usb 1-4: new high speed USB device using ehci_hcd and address 5 Sep 8 13:56:02 gripir usb 1-4: configuration #1 chosen from 1 choice Sep 8 13:56:02 gripir Initializing USB Mass Storage driver... Sep 8 13:56:02 gripir scsi2 : SCSI emulation for USB Mass Storage devices Sep 8 13:56:02 gripir usbcore: registered new driver usb-storage Sep 8 13:56:02 gripir USB Mass Storage support registered. Sep 8 13:56:07 gripir Vendor: Imation Model: Flash Drive Rev: 1.00 Sep 8 13:56:07 gripir Type: Direct-Access ANSI SCSI revision: 02 Sep 8 13:56:07 gripir SCSI device sdb: 1967104 512-byte hdwr sectors (1007 MB) Sep 8 13:56:07 gripir sdb: Write Protect is off Sep 8 13:56:07 gripir SCSI device sdb: 1967104 512-byte hdwr sectors (1007 MB) Sep 8 13:56:07 gripir sdb: Write Protect is off Sep 8 13:56:07 gripir sdb: sdb1 Sep 8 13:56:07 gripir sd 2:0:0:0: Attached scsi removable disk sdb Sep 8 14:00:16 gripir hdd: command error: status=0x51 { DriveReady SeekComplete Error } Sep 8 14:00:16 gripir hdd: command error: error=0x50 { LastFailedSense=0x05 } Sep 8 14:00:16 gripir ide: failed opcode was: unknown Sep 8 14:00:16 gripir end_request: I/O error, dev hdd, sector 8388352 Sep 8 14:00:16 gripir hdd: command error: status=0x51 { DriveReady SeekComplete Error } Sep 8 14:00:16 gripir hdd: command error: error=0x50 { LastFailedSense=0x05 } Sep 8 14:00:16 gripir ide: failed opcode was: unknown Sep 8 14:00:16 gripir end_request: I/O error, dev hdd, sector 8388356 Sep 8 14:00:16 gripir hdd: command error: status=0x51 { DriveReady SeekComplete Error } Sep 8 14:00:16 gripir hdd: command error: error=0x50 { LastFailedSense=0x05 } Sep 8 14:00:16 gripir ide: failed opcode was: unknown Sep 8 14:00:16 gripir end_request: I/O error, dev hdd, sector 8388352 Sep 8 14:00:16 gripir hdd: command error: status=0x51 { DriveReady SeekComplete Error } Sep 8 14:00:16 gripir hdd: command error: error=0x50 { LastFailedSense=0x05 } Sep 8 14:00:16 gripir ide: failed opcode was: unknown Sep 8 14:00:16 gripir end_request: I/O error, dev hdd, sector 8388356 Sep 8 14:00:27 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:00:27 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:00:27 gripir ide: failed opcode was: unknown Sep 8 14:00:27 gripir end_request: I/O error, dev hdd, sector 0 Sep 8 14:00:35 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:00:35 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:00:35 gripir ide: failed opcode was: unknown Sep 8 14:00:35 gripir end_request: I/O error, dev hdd, sector 4 Sep 8 14:00:41 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:00:41 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:00:41 gripir ide: failed opcode was: unknown Sep 8 14:00:41 gripir end_request: I/O error, dev hdd, sector 8 Sep 8 14:00:48 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:00:48 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:00:48 gripir ide: failed opcode was: unknown Sep 8 14:00:48 gripir end_request: I/O error, dev hdd, sector 12 Sep 8 14:00:56 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:00:56 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:00:56 gripir ide: failed opcode was: unknown Sep 8 14:00:56 gripir end_request: I/O error, dev hdd, sector 16 Sep 8 14:01:03 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:01:03 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:01:03 gripir ide: failed opcode was: unknown Sep 8 14:01:03 gripir end_request: I/O error, dev hdd, sector 20 Sep 8 14:01:09 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:01:09 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:01:09 gripir ide: failed opcode was: unknown Sep 8 14:01:09 gripir end_request: I/O error, dev hdd, sector 24 Sep 8 14:01:15 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:01:15 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:01:15 gripir ide: failed opcode was: unknown Sep 8 14:01:15 gripir end_request: I/O error, dev hdd, sector 28 Sep 8 14:01:21 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:01:21 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:01:21 gripir ide: failed opcode was: unknown Sep 8 14:01:21 gripir end_request: I/O error, dev hdd, sector 32 Sep 8 14:01:28 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:01:28 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:01:28 gripir ide: failed opcode was: unknown Sep 8 14:01:28 gripir end_request: I/O error, dev hdd, sector 36 Sep 8 14:01:36 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:01:36 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:01:36 gripir ide: failed opcode was: unknown Sep 8 14:01:36 gripir end_request: I/O error, dev hdd, sector 40 Sep 8 14:01:45 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:01:45 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:01:45 gripir ide: failed opcode was: unknown Sep 8 14:01:45 gripir end_request: I/O error, dev hdd, sector 44 Sep 8 14:01:53 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:01:53 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:01:53 gripir ide: failed opcode was: unknown Sep 8 14:01:53 gripir end_request: I/O error, dev hdd, sector 48 Sep 8 14:02:00 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:02:00 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:02:00 gripir ide: failed opcode was: unknown Sep 8 14:02:00 gripir end_request: I/O error, dev hdd, sector 52 Sep 8 14:02:08 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:02:08 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:02:08 gripir ide: failed opcode was: unknown Sep 8 14:02:08 gripir end_request: I/O error, dev hdd, sector 56 Sep 8 14:02:17 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:02:17 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:02:17 gripir ide: failed opcode was: unknown Sep 8 14:02:17 gripir end_request: I/O error, dev hdd, sector 60 Sep 8 14:02:26 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:02:26 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:02:26 gripir ide: failed opcode was: unknown Sep 8 14:02:26 gripir end_request: I/O error, dev hdd, sector 64 Sep 8 14:02:32 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:02:32 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:02:32 gripir ide: failed opcode was: unknown Sep 8 14:02:32 gripir end_request: I/O error, dev hdd, sector 68 Sep 8 14:02:41 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:02:41 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:02:41 gripir ide: failed opcode was: unknown Sep 8 14:02:41 gripir end_request: I/O error, dev hdd, sector 72 Sep 8 14:02:47 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:02:47 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:02:47 gripir ide: failed opcode was: unknown Sep 8 14:02:47 gripir end_request: I/O error, dev hdd, sector 76 Sep 8 14:02:55 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:02:55 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:02:55 gripir ide: failed opcode was: unknown Sep 8 14:02:55 gripir end_request: I/O error, dev hdd, sector 80 Sep 8 14:03:02 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:03:02 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:03:02 gripir ide: failed opcode was: unknown Sep 8 14:03:02 gripir end_request: I/O error, dev hdd, sector 84 Sep 8 14:03:10 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:03:10 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:03:10 gripir ide: failed opcode was: unknown Sep 8 14:03:10 gripir end_request: I/O error, dev hdd, sector 88 Sep 8 14:03:19 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:03:19 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:03:19 gripir ide: failed opcode was: unknown Sep 8 14:03:19 gripir end_request: I/O error, dev hdd, sector 92 Sep 8 14:03:25 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:03:25 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:03:25 gripir ide: failed opcode was: unknown Sep 8 14:03:25 gripir end_request: I/O error, dev hdd, sector 96 Sep 8 14:03:31 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:03:31 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:03:31 gripir ide: failed opcode was: unknown Sep 8 14:03:31 gripir end_request: I/O error, dev hdd, sector 100 Sep 8 14:03:52 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:03:52 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:03:52 gripir ide: failed opcode was: unknown Sep 8 14:03:52 gripir end_request: I/O error, dev hdd, sector 104 Sep 8 14:03:58 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:03:58 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:03:58 gripir ide: failed opcode was: unknown Sep 8 14:03:58 gripir end_request: I/O error, dev hdd, sector 108 Sep 8 14:04:13 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:04:13 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:04:13 gripir ide: failed opcode was: unknown Sep 8 14:04:13 gripir end_request: I/O error, dev hdd, sector 112 Sep 8 14:04:37 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:04:37 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:04:37 gripir ide: failed opcode was: unknown Sep 8 14:04:37 gripir end_request: I/O error, dev hdd, sector 116 Sep 8 14:04:56 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:04:56 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:04:56 gripir ide: failed opcode was: unknown Sep 8 14:04:56 gripir end_request: I/O error, dev hdd, sector 120 Sep 8 14:05:04 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:05:04 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:05:04 gripir ide: failed opcode was: unknown Sep 8 14:05:04 gripir end_request: I/O error, dev hdd, sector 124 Sep 8 14:05:18 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:05:18 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:05:18 gripir ide: failed opcode was: unknown Sep 8 14:05:18 gripir end_request: I/O error, dev hdd, sector 128 Sep 8 14:05:39 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:05:39 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:05:39 gripir ide: failed opcode was: unknown Sep 8 14:05:39 gripir end_request: I/O error, dev hdd, sector 132 Sep 8 14:05:47 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:05:47 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:05:47 gripir ide: failed opcode was: unknown Sep 8 14:05:47 gripir end_request: I/O error, dev hdd, sector 0 Sep 8 14:06:03 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:06:03 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:06:03 gripir ide: failed opcode was: unknown Sep 8 14:06:03 gripir end_request: I/O error, dev hdd, sector 4 Sep 8 14:06:17 gripir hdd: command error: status=0x51 { DriveReady SeekComplete Error } Sep 8 14:06:17 gripir hdd: command error: error=0x50 { LastFailedSense=0x05 } Sep 8 14:06:17 gripir ide: failed opcode was: unknown Sep 8 14:06:17 gripir end_request: I/O error, dev hdd, sector 8388352 Sep 8 14:06:17 gripir hdd: command error: status=0x51 { DriveReady SeekComplete Error } Sep 8 14:06:17 gripir hdd: command error: error=0x50 { LastFailedSense=0x05 } Sep 8 14:06:17 gripir ide: failed opcode was: unknown Sep 8 14:06:17 gripir end_request: I/O error, dev hdd, sector 8388356 Sep 8 14:06:25 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:06:25 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:06:25 gripir ide: failed opcode was: unknown Sep 8 14:06:25 gripir end_request: I/O error, dev hdd, sector 0 Sep 8 14:06:34 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:06:34 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:06:34 gripir ide: failed opcode was: unknown Sep 8 14:06:34 gripir end_request: I/O error, dev hdd, sector 4 Sep 8 14:06:34 gripir hdd: command error: status=0x51 { DriveReady SeekComplete Error } Sep 8 14:06:34 gripir hdd: command error: error=0x50 { LastFailedSense=0x05 } Sep 8 14:06:34 gripir ide: failed opcode was: unknown Sep 8 14:06:34 gripir end_request: I/O error, dev hdd, sector 8388352 Sep 8 14:06:34 gripir hdd: command error: status=0x51 { DriveReady SeekComplete Error } Sep 8 14:06:34 gripir hdd: command error: error=0x50 { LastFailedSense=0x05 } Sep 8 14:06:34 gripir ide: failed opcode was: unknown Sep 8 14:06:34 gripir end_request: I/O error, dev hdd, sector 8388356 Sep 8 14:06:43 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:06:43 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:06:43 gripir ide: failed opcode was: unknown Sep 8 14:06:43 gripir end_request: I/O error, dev hdd, sector 0 Sep 8 14:06:52 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:06:52 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:06:52 gripir ide: failed opcode was: unknown Sep 8 14:06:52 gripir end_request: I/O error, dev hdd, sector 4 Sep 8 14:06:52 gripir hdd: command error: status=0x51 { DriveReady SeekComplete Error } Sep 8 14:06:52 gripir hdd: command error: error=0x50 { LastFailedSense=0x05 } Sep 8 14:06:52 gripir ide: failed opcode was: unknown Sep 8 14:06:52 gripir end_request: I/O error, dev hdd, sector 8388352 Sep 8 14:06:52 gripir hdd: command error: status=0x51 { DriveReady SeekComplete Error } Sep 8 14:06:52 gripir hdd: command error: error=0x50 { LastFailedSense=0x05 } Sep 8 14:06:52 gripir ide: failed opcode was: unknown Sep 8 14:06:52 gripir end_request: I/O error, dev hdd, sector 8388356 Sep 8 14:07:01 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:07:01 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:07:01 gripir ide: failed opcode was: unknown Sep 8 14:07:01 gripir end_request: I/O error, dev hdd, sector 0 Sep 8 14:07:07 gripir hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Sep 8 14:07:07 gripir hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Sep 8 14:07:07 gripir ide: failed opcode was: unknown Sep 8 14:07:07 gripir end_request: I/O error, dev hdd, sector 4 Sep 8 14:08:32 gripir kjournald starting. Commit interval 5 seconds Sep 8 14:08:32 gripir EXT3 FS on sda1, internal journal Sep 8 14:08:32 gripir EXT3-fs: mounted filesystem with ordered data mode. Sep 8 14:09:48 gripir usb 1-4: USB disconnect, address 5 Sep 8 14:09:50 gripir usb 1-4: new high speed USB device using ehci_hcd and address 6 Sep 8 14:09:50 gripir usb 1-4: configuration #1 chosen from 1 choice Sep 8 14:09:50 gripir scsi3 : SCSI emulation for USB Mass Storage devices Sep 8 14:09:55 gripir Vendor: Imation Model: Flash Drive Rev: 1.00 Sep 8 14:09:55 gripir Type: Direct-Access ANSI SCSI revision: 02 Sep 8 14:09:55 gripir SCSI device sdb: 1967104 512-byte hdwr sectors (1007 MB) Sep 8 14:09:55 gripir sdb: Write Protect is off Sep 8 14:09:55 gripir SCSI device sdb: 1967104 512-byte hdwr sectors (1007 MB) Sep 8 14:09:55 gripir sdb: Write Protect is off Sep 8 14:09:55 gripir sdb: sdb1 Sep 8 14:09:55 gripir sd 3:0:0:0: Attached scsi removable disk sdb Sep 8 14:10:42 gripir linkstatus=DISCONNECTED (unhandled) Sep 8 14:10:43 gripir linkstatus=CONNECTED Sep 8 14:11:53 gripir usb 1-4: USB disconnect, address 6 Sep 8 14:11:53 gripir sd 3:0:0:0: SCSI error: return code = 0x10000 Sep 8 14:11:53 gripir end_request: I/O error, dev sdb, sector 563560 Sep 8 14:11:53 gripir sd 3:0:0:0: SCSI error: return code = 0x10000 Sep 8 14:11:53 gripir end_request: I/O error, dev sdb, sector 563800 Sep 8 14:11:53 gripir lost page write due to I/O error on sdb1 Sep 8 14:11:53 gripir lost page write due to I/O error on sdb1 Sep 8 14:11:53 gripir lost page write due to I/O error on sdb1 Sep 8 14:11:53 gripir lost page write due to I/O error on sdb1 Sep 8 14:11:53 gripir lost page write due to I/O error on sdb1 Sep 8 14:11:53 gripir lost page write due to I/O error on sdb1 Sep 8 14:11:53 gripir lost page write due to I/O error on sdb1 Sep 8 14:11:53 gripir lost page write due to I/O error on sdb1 Sep 8 14:11:53 gripir lost page write due to I/O error on sdb1 Sep 8 14:11:53 gripir lost page write due to I/O error on sdb1 Sep 8 15:31:30 gripir NET: Registered protocol family 4 Sep 8 18:08:24 gripir (gripir-2741): Beenden Sep 8 18:08:24 gripir (gripir-3689): (Version 2.14.0) wird gestartet, Prozesskennung 3689, Benutzer »gripir« Sep 8 18:08:24 gripir (gripir-3689): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 8 18:08:24 gripir (gripir-3689): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 8 18:08:24 gripir (gripir-3689): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 8 18:08:24 gripir gdm[2679]: Master wird angehalten... Sep 8 18:08:26 gripir shutdown[2679]: shutting down for system halt Sep 8 18:08:26 gripir init: Switching to runlevel: 0 Sep 9 17:58:11 gripir Linux version 2.6.17-ARCH (root@Wohnung) (gcc version 4.1.1) #1 SMP PREEMPT Sat Jul 1 10:16:16 CEST 2006 Sep 9 17:58:11 gripir BIOS-provided physical RAM map: Sep 9 17:58:11 gripir BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Sep 9 17:58:11 gripir BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Sep 9 17:58:11 gripir BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Sep 9 17:58:11 gripir BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) Sep 9 17:58:11 gripir BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) Sep 9 17:58:11 gripir BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) Sep 9 17:58:11 gripir BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Sep 9 17:58:11 gripir BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Sep 9 17:58:11 gripir BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Sep 9 17:58:11 gripir 127MB HIGHMEM available. Sep 9 17:58:11 gripir 896MB LOWMEM available. Sep 9 17:58:11 gripir found SMP MP-table at 000f5570 Sep 9 17:58:11 gripir DMI 2.2 present. Sep 9 17:58:11 gripir ACPI: PM-Timer IO Port: 0x1008 Sep 9 17:58:11 gripir ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Sep 9 17:58:11 gripir Processor #0 15:4 APIC version 16 Sep 9 17:58:11 gripir ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Sep 9 17:58:11 gripir ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Sep 9 17:58:11 gripir IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 Sep 9 17:58:11 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Sep 9 17:58:11 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) Sep 9 17:58:11 gripir Enabling APIC mode: Flat. Using 1 I/O APICs Sep 9 17:58:11 gripir Using ACPI (MADT) for SMP configuration information Sep 9 17:58:11 gripir Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Sep 9 17:58:11 gripir Built 1 zonelists Sep 9 17:58:11 gripir Kernel command line: root=/dev/hda3 ro vga=773 Sep 9 17:58:11 gripir Enabling fast FPU save and restore... done. Sep 9 17:58:11 gripir Enabling unmasked SIMD FPU exception support... done. Sep 9 17:58:11 gripir Initializing CPU#0 Sep 9 17:58:11 gripir PID hash table entries: 4096 (order: 12, 16384 bytes) Sep 9 17:58:11 gripir Detected 1999.783 MHz processor. Sep 9 17:58:11 gripir Using pmtmr for high-res timesource Sep 9 17:58:11 gripir Console: colour dummy device 80x25 Sep 9 17:58:11 gripir Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Sep 9 17:58:11 gripir Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Sep 9 17:58:11 gripir Memory: 1034156k/1048512k available (2409k kernel code, 13576k reserved, 715k data, 240k init, 131008k highmem) Sep 9 17:58:11 gripir Checking if this processor honours the WP bit even in supervisor mode... Ok. Sep 9 17:58:11 gripir Calibrating delay using timer specific routine.. 4001.53 BogoMIPS (lpj=8003061) Sep 9 17:58:11 gripir Security Framework v1.0.0 initialized Sep 9 17:58:11 gripir Mount-cache hash table entries: 512 Sep 9 17:58:11 gripir CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Sep 9 17:58:11 gripir CPU: L2 Cache: 512K (64 bytes/line) Sep 9 17:58:11 gripir Intel machine check architecture supported. Sep 9 17:58:11 gripir Intel machine check reporting enabled on CPU#0. Sep 9 17:58:11 gripir Checking 'hlt' instruction... OK. Sep 9 17:58:11 gripir SMP alternatives: switching to UP code Sep 9 17:58:11 gripir Freeing SMP alternatives: 16k freed Sep 9 17:58:11 gripir checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Sep 9 17:58:11 gripir Freeing initrd memory: 840k freed Sep 9 17:58:11 gripir ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. Sep 9 17:58:11 gripir CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 0a Sep 9 17:58:11 gripir Total of 1 processors activated (4001.53 BogoMIPS). Sep 9 17:58:11 gripir ENABLING IO-APIC IRQs Sep 9 17:58:11 gripir ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Sep 9 17:58:11 gripir Brought up 1 CPUs Sep 9 17:58:11 gripir migration_cost=0 Sep 9 17:58:11 gripir NET: Registered protocol family 16 Sep 9 17:58:11 gripir ACPI: bus type pci registered Sep 9 17:58:11 gripir PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=1 Sep 9 17:58:11 gripir Setting up standard PCI resources Sep 9 17:58:11 gripir ACPI: Subsystem revision 20060127 Sep 9 17:58:11 gripir ACPI: Interpreter enabled Sep 9 17:58:11 gripir ACPI: Using IOAPIC for interrupt routing Sep 9 17:58:11 gripir ACPI: PCI Root Bridge [PCI0] (0000:00) Sep 9 17:58:11 gripir ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Sep 9 17:58:11 gripir ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) Sep 9 17:58:11 gripir ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 9 17:58:11 gripir ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. Sep 9 17:58:11 gripir ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 9 17:58:11 gripir ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 9 17:58:11 gripir ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 9 17:58:11 gripir ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Sep 9 17:58:11 gripir ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) Sep 9 17:58:11 gripir Linux Plug and Play Support v0.97 (c) Adam Belay Sep 9 17:58:11 gripir pnp: PnP ACPI init Sep 9 17:58:11 gripir pnp: PnP ACPI: found 10 devices Sep 9 17:58:11 gripir SCSI subsystem initialized Sep 9 17:58:11 gripir PCI: Using ACPI for IRQ routing Sep 9 17:58:11 gripir PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Sep 9 17:58:11 gripir PCI: Bridge: 0000:00:01.0 Sep 9 17:58:11 gripir IO window: disabled. Sep 9 17:58:11 gripir MEM window: e4000000-e5ffffff Sep 9 17:58:11 gripir PREFETCH window: d0000000-dfffffff Sep 9 17:58:11 gripir NET: Registered protocol family 2 Sep 9 17:58:11 gripir IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Sep 9 17:58:11 gripir TCP established hash table entries: 131072 (order: 8, 1572864 bytes) Sep 9 17:58:11 gripir TCP bind hash table entries: 65536 (order: 7, 786432 bytes) Sep 9 17:58:11 gripir TCP: Hash tables configured (established 131072 bind 65536) Sep 9 17:58:11 gripir TCP reno registered Sep 9 17:58:11 gripir apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) Sep 9 17:58:11 gripir apm: overridden by ACPI. Sep 9 17:58:11 gripir highmem bounce pool size: 64 pages Sep 9 17:58:11 gripir VFS: Disk quotas dquot_6.5.1 Sep 9 17:58:11 gripir Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Sep 9 17:58:11 gripir Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Sep 9 17:58:11 gripir Initializing Cryptographic API Sep 9 17:58:11 gripir io scheduler noop registered Sep 9 17:58:11 gripir io scheduler anticipatory registered (default) Sep 9 17:58:11 gripir io scheduler deadline registered Sep 9 17:58:11 gripir io scheduler cfq registered Sep 9 17:58:11 gripir vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 262144k Sep 9 17:58:11 gripir vesafb: mode is 1024x768x8, linelength=1024, pages=3 Sep 9 17:58:11 gripir vesafb: protected mode interface info at c000:e2e0 Sep 9 17:58:11 gripir vesafb: scrolling: redraw Sep 9 17:58:11 gripir vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Sep 9 17:58:11 gripir Console: switching to colour frame buffer device 128x48 Sep 9 17:58:11 gripir fb0: VESA VGA frame buffer device Sep 9 17:58:11 gripir ACPI: Power Button (FF) [PWRF] Sep 9 17:58:11 gripir ACPI: Power Button (CM) [PWRB] Sep 9 17:58:11 gripir ACPI: Sleep Button (CM) [FUTS] Sep 9 17:58:11 gripir ACPI: Fan [FAN] (on) Sep 9 17:58:11 gripir ACPI: Thermal Zone [THRM] (40 C) Sep 9 17:58:11 gripir isapnp: Scanning for PnP cards... Sep 9 17:58:11 gripir isapnp: No Plug & Play device found Sep 9 17:58:11 gripir Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled Sep 9 17:58:11 gripir serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 9 17:58:11 gripir 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 9 17:58:11 gripir Floppy drive(s): fd0 is 1.44M Sep 9 17:58:11 gripir FDC 0 is a post-1991 82077 Sep 9 17:58:11 gripir RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Sep 9 17:58:11 gripir loop: loaded (max 8 devices) Sep 9 17:58:11 gripir PNP: No PS/2 controller found. Probing ports directly. Sep 9 17:58:11 gripir serio: i8042 AUX port at 0x60,0x64 irq 12 Sep 9 17:58:11 gripir serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 9 17:58:11 gripir mice: PS/2 mouse device common for all mice Sep 9 17:58:11 gripir TCP bic registered Sep 9 17:58:11 gripir NET: Registered protocol family 1 Sep 9 17:58:11 gripir NET: Registered protocol family 17 Sep 9 17:58:11 gripir Using IPI No-Shortcut mode Sep 9 17:58:11 gripir ACPI wakeup devices: Sep 9 17:58:11 gripir FUTS PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 Sep 9 17:58:11 gripir ACPI: (supports S0 S1 S4 S5) Sep 9 17:58:11 gripir RAMDISK: Compressed image found at block 0 Sep 9 17:58:11 gripir VFS: Mounted root (ext2 filesystem). Sep 9 17:58:11 gripir Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Sep 9 17:58:11 gripir ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Sep 9 17:58:11 gripir SIS5513: IDE controller at PCI slot 0000:00:02.5 Sep 9 17:58:11 gripir SIS5513: chipset revision 1 Sep 9 17:58:11 gripir SIS5513: not 100% native mode: will probe irqs later Sep 9 17:58:11 gripir SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller Sep 9 17:58:11 gripir ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio Sep 9 17:58:11 gripir ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio Sep 9 17:58:11 gripir hda: ST340810A, ATA DISK drive Sep 9 17:58:11 gripir ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Sep 9 17:58:11 gripir hdc: CD-950E/TKU, ATAPI CD/DVD-ROM drive Sep 9 17:58:11 gripir hdd: AOPEN DUW1616/ARR, ATAPI CD/DVD-ROM drive Sep 9 17:58:11 gripir ide1 at 0x170-0x177,0x376 on irq 15 Sep 9 17:58:11 gripir hda: max request size: 128KiB Sep 9 17:58:11 gripir hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) Sep 9 17:58:11 gripir hda: cache flushes not supported Sep 9 17:58:11 gripir hda: hda1 hda2 hda3 Sep 9 17:58:11 gripir ide-floppy driver 0.99.newide Sep 9 17:58:11 gripir sata_sis 0000:00:05.0: version 0.5 Sep 9 17:58:11 gripir ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 9 17:58:11 gripir sata_sis 0000:00:05.0: Detected SiS 180/181 chipset in SATA mode Sep 9 17:58:11 gripir ata1: SATA max UDMA/133 cmd 0xE100 ctl 0xE202 bmdma 0xE500 irq 16 Sep 9 17:58:11 gripir ata2: SATA max UDMA/133 cmd 0xE300 ctl 0xE402 bmdma 0xE508 irq 16 Sep 9 17:58:11 gripir ata1: SATA link up 1.5 Gbps (SStatus 113) Sep 9 17:58:11 gripir ata1: dev 0 ATA-6, max UDMA/100, 321672960 sectors: LBA48 Sep 9 17:58:11 gripir ata1: dev 0 configured for UDMA/100 Sep 9 17:58:11 gripir scsi0 : sata_sis Sep 9 17:58:11 gripir ata2: SATA link down (SStatus 0) Sep 9 17:58:11 gripir scsi1 : sata_sis Sep 9 17:58:11 gripir Vendor: ATA Model: HDS722516VLSA80 Rev: V34O Sep 9 17:58:11 gripir Type: Direct-Access ANSI SCSI revision: 05 Sep 9 17:58:11 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 9 17:58:11 gripir sda: Write Protect is off Sep 9 17:58:11 gripir SCSI device sda: drive cache: write back Sep 9 17:58:11 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 9 17:58:11 gripir sda: Write Protect is off Sep 9 17:58:11 gripir SCSI device sda: drive cache: write back Sep 9 17:58:11 gripir sda: sda1 Sep 9 17:58:11 gripir sd 0:0:0:0: Attached scsi disk sda Sep 9 17:58:11 gripir ReiserFS: hda3: found reiserfs format "3.6" with standard journal Sep 9 17:58:11 gripir ReiserFS: hda3: using ordered data mode Sep 9 17:58:11 gripir ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Sep 9 17:58:11 gripir ReiserFS: hda3: checking transaction log (hda3) Sep 9 17:58:11 gripir ReiserFS: hda3: Using r5 hash to sort names Sep 9 17:58:11 gripir Freeing unused kernel memory: 240k freed Sep 9 17:58:11 gripir usbcore: registered new driver usbfs Sep 9 17:58:11 gripir usbcore: registered new driver hub Sep 9 17:58:11 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 9 17:58:11 gripir ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 9 17:58:11 gripir hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) Sep 9 17:58:11 gripir Uniform CD-ROM driver Revision: 3.20 Sep 9 17:58:11 gripir hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Sep 9 17:58:11 gripir ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 17 Sep 9 17:58:11 gripir ohci_hcd 0000:00:03.0: OHCI Host Controller Sep 9 17:58:11 gripir ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 Sep 9 17:58:11 gripir ohci_hcd 0000:00:03.0: irq 17, io mem 0xe6024000 Sep 9 17:58:11 gripir Real Time Clock Driver v1.12ac Sep 9 17:58:11 gripir input: PC Speaker as /class/input/input0 Sep 9 17:58:11 gripir parport: PnPBIOS parport detected. Sep 9 17:58:11 gripir parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] Sep 9 17:58:11 gripir usb usb1: configuration #1 chosen from 1 choice Sep 9 17:58:11 gripir hub 1-0:1.0: USB hub found Sep 9 17:58:11 gripir hub 1-0:1.0: 3 ports detected Sep 9 17:58:11 gripir CSLIP: code copyright 1989 Regents of the University of California Sep 9 17:58:11 gripir ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 18 Sep 9 17:58:11 gripir ehci_hcd 0000:00:03.3: EHCI Host Controller Sep 9 17:58:11 gripir ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 2 Sep 9 17:58:11 gripir ehci_hcd 0000:00:03.3: irq 18, io mem 0xe6022000 Sep 9 17:58:11 gripir ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Sep 9 17:58:11 gripir usb usb2: configuration #1 chosen from 1 choice Sep 9 17:58:11 gripir hub 2-0:1.0: USB hub found Sep 9 17:58:11 gripir hub 2-0:1.0: 8 ports detected Sep 9 17:58:11 gripir PPP generic driver version 2.4.2 Sep 9 17:58:11 gripir Linux video capture interface: v1.00 Sep 9 17:58:11 gripir ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 19 Sep 9 17:58:11 gripir ohci_hcd 0000:00:03.1: OHCI Host Controller Sep 9 17:58:11 gripir ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 Sep 9 17:58:11 gripir ohci_hcd 0000:00:03.1: irq 19, io mem 0xe6020000 Sep 9 17:58:11 gripir Linux agpgart interface v0.101 (c) Dave Jones Sep 9 17:58:11 gripir usb usb3: configuration #1 chosen from 1 choice Sep 9 17:58:11 gripir hub 3-0:1.0: USB hub found Sep 9 17:58:11 gripir hub 3-0:1.0: 3 ports detected Sep 9 17:58:11 gripir ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 20 Sep 9 17:58:11 gripir ohci_hcd 0000:00:03.2: OHCI Host Controller Sep 9 17:58:11 gripir ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 Sep 9 17:58:11 gripir ohci_hcd 0000:00:03.2: irq 20, io mem 0xe6021000 Sep 9 17:58:11 gripir usb usb4: configuration #1 chosen from 1 choice Sep 9 17:58:11 gripir hub 4-0:1.0: USB hub found Sep 9 17:58:11 gripir hub 4-0:1.0: 2 ports detected Sep 9 17:58:11 gripir nvidia: module license 'NVIDIA' taints kernel. Sep 9 17:58:11 gripir ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21 Sep 9 17:58:11 gripir NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774 Tue Aug 1 20:54:08 PDT 2006 Sep 9 17:58:11 gripir sis900.c: v1.08.09 Sep. 19 2005 Sep 9 17:58:11 gripir ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 22 Sep 9 17:58:11 gripir 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. Sep 9 17:58:11 gripir 0000:00:04.0: Using transceiver found at address 1 as default Sep 9 17:58:11 gripir eth0: SiS 900 PCI Fast Ethernet at 0xe000, IRQ 22, 00:11:5b:4a:0d:e2. Sep 9 17:58:11 gripir usb 3-1: new low speed USB device using ohci_hcd and address 2 Sep 9 17:58:11 gripir agpgart: Detected AGP bridge 0 Sep 9 17:58:11 gripir agpgart: AGP aperture is 64M @ 0xe0000000 Sep 9 17:58:11 gripir usb 3-1: configuration #1 chosen from 1 choice Sep 9 17:58:11 gripir ohci_hcd 0000:00:03.0: wakeup Sep 9 17:58:11 gripir gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xe800, speed 1242kHz Sep 9 17:58:11 gripir ohci_hcd 0000:00:03.2: wakeup Sep 9 17:58:11 gripir saa7130/34: v4l2 driver version 0.2.14 loaded Sep 9 17:58:11 gripir ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 22 Sep 9 17:58:11 gripir saa7134[0]: found at 0000:00:0d.0, rev: 1, irq: 22, latency: 32, mmio: 0xe6026000 Sep 9 17:58:11 gripir saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected] Sep 9 17:58:11 gripir saa7134[0]: board init: gpio is 0 Sep 9 17:58:11 gripir lp0: using parport0 (interrupt-driven). Sep 9 17:58:11 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 9 17:58:11 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 9 17:58:11 gripir saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9 Sep 9 17:58:11 gripir saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00 Sep 9 17:58:11 gripir saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff Sep 9 17:58:11 gripir saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 9 17:58:11 gripir saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 9 17:58:11 gripir saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 9 17:58:11 gripir saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 9 17:58:11 gripir saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 9 17:58:11 gripir pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Sep 9 17:58:11 gripir saa7134[0] Tuner type is 38 Sep 9 17:58:11 gripir ppdev: user-space parallel port driver Sep 9 17:58:11 gripir usb 1-1: new low speed USB device using ohci_hcd and address 2 Sep 9 17:58:11 gripir tuner 0-0060: All bytes are equal. It is not a TEA5767 Sep 9 17:58:11 gripir tuner 0-0060: chip found @ 0xc0 (saa7134[0]) Sep 9 17:58:11 gripir tuner 0-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) Sep 9 17:58:11 gripir tda9887 0-0043: chip found @ 0x86 (saa7134[0]) Sep 9 17:58:11 gripir saa7134[0]: registered device video0 [v4l2] Sep 9 17:58:11 gripir saa7134[0]: registered device vbi0 Sep 9 17:58:11 gripir saa7134[0]: registered device radio0 Sep 9 17:58:11 gripir usb 1-1: configuration #1 chosen from 1 choice Sep 9 17:58:11 gripir shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Sep 9 17:58:11 gripir usb 4-1: new full speed USB device using ohci_hcd and address 2 Sep 9 17:58:11 gripir usb 4-1: configuration #1 chosen from 1 choice Sep 9 17:58:11 gripir usbcore: registered new driver hiddev Sep 9 17:58:11 gripir input: Logitech USB-PS/2 Optical Mouse as /class/input/input1 Sep 9 17:58:11 gripir input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.1-1 Sep 9 17:58:11 gripir input: Microsoft® Office Keyboard as /class/input/input2 Sep 9 17:58:11 gripir input: USB HID v1.10 Keyboard [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 9 17:58:11 gripir input: Microsoft® Office Keyboard as /class/input/input3 Sep 9 17:58:11 gripir input: USB HID v1.10 Device [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 9 17:58:11 gripir usbcore: registered new driver usbhid Sep 9 17:58:11 gripir drivers/usb/input/hid-core.c: v2.6:USB HID core driver Sep 9 17:58:11 gripir prism2usb_init: prism2_usb.o: 0.2.3 Loaded Sep 9 17:58:11 gripir prism2usb_init: dev_info is: prism2_usb Sep 9 17:58:11 gripir usb 4-1: reset full speed USB device using ohci_hcd and address 2 Sep 9 17:58:11 gripir usbcore: registered new driver prism2_usb Sep 9 17:58:11 gripir NTFS driver 2.1.27 [Flags: R/W MODULE]. Sep 9 17:58:11 gripir NTFS volume version 3.1. Sep 9 17:58:11 gripir kjournald starting. Commit interval 5 seconds Sep 9 17:58:11 gripir EXT3 FS on sda1, internal journal Sep 9 17:58:11 gripir EXT3-fs: mounted filesystem with ordered data mode. Sep 9 17:58:11 gripir Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 across:498004k Sep 9 17:58:12 gripir ident: nic h/w: id=0x8026 1.0.0 Sep 9 17:58:12 gripir ident: pri f/w: id=0x15 1.1.3 Sep 9 17:58:12 gripir ident: sta f/w: id=0x1f 1.7.1 Sep 9 17:58:12 gripir MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1 Sep 9 17:58:12 gripir CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1 Sep 9 17:58:12 gripir PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/4 Sep 9 17:58:12 gripir STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/12 Sep 9 17:58:12 gripir PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 9 17:58:12 gripir STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 9 17:58:12 gripir STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1 Sep 9 17:58:12 gripir Prism2 card SN: 000000000000 Sep 9 17:58:13 gripir linkstatus=CONNECTED Sep 9 17:58:22 gripir NVRM: not using NVAGP, an AGPGART backend is loaded! Sep 9 17:58:40 gripir (gripir-2743): (Version 2.14.0) wird gestartet, Prozesskennung 2743, Benutzer »gripir« Sep 9 17:58:40 gripir (gripir-2743): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 9 17:58:40 gripir (gripir-2743): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 9 17:58:40 gripir (gripir-2743): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 9 17:58:47 gripir (gripir-2743): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 0 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 9 17:58:56 gripir NET: Registered protocol family 10 Sep 9 17:58:56 gripir lo: Disabled Privacy Extensions Sep 9 17:58:56 gripir IPv6 over IPv4 tunneling driver Sep 9 21:55:02 gripir (gripir-2743): Beenden Sep 9 21:55:02 gripir gdm[2681]: Master wird angehalten... Sep 9 21:55:03 gripir shutdown[2681]: shutting down for system halt Sep 9 21:55:03 gripir init: Switching to runlevel: 0 Sep 10 07:44:30 gripir Linux version 2.6.17-ARCH (root@Wohnung) (gcc version 4.1.1) #1 SMP PREEMPT Sat Jul 1 10:16:16 CEST 2006 Sep 10 07:44:30 gripir BIOS-provided physical RAM map: Sep 10 07:44:30 gripir BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Sep 10 07:44:30 gripir BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Sep 10 07:44:30 gripir BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Sep 10 07:44:30 gripir BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) Sep 10 07:44:30 gripir BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) Sep 10 07:44:30 gripir BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) Sep 10 07:44:30 gripir BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Sep 10 07:44:30 gripir BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Sep 10 07:44:30 gripir BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Sep 10 07:44:30 gripir 127MB HIGHMEM available. Sep 10 07:44:30 gripir 896MB LOWMEM available. Sep 10 07:44:30 gripir found SMP MP-table at 000f5570 Sep 10 07:44:30 gripir DMI 2.2 present. Sep 10 07:44:30 gripir ACPI: PM-Timer IO Port: 0x1008 Sep 10 07:44:30 gripir ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Sep 10 07:44:30 gripir Processor #0 15:4 APIC version 16 Sep 10 07:44:30 gripir ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Sep 10 07:44:30 gripir ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Sep 10 07:44:30 gripir IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 Sep 10 07:44:30 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Sep 10 07:44:30 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) Sep 10 07:44:30 gripir Enabling APIC mode: Flat. Using 1 I/O APICs Sep 10 07:44:30 gripir Using ACPI (MADT) for SMP configuration information Sep 10 07:44:30 gripir Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Sep 10 07:44:30 gripir Built 1 zonelists Sep 10 07:44:30 gripir Kernel command line: root=/dev/hda3 ro vga=773 Sep 10 07:44:30 gripir Enabling fast FPU save and restore... done. Sep 10 07:44:30 gripir Enabling unmasked SIMD FPU exception support... done. Sep 10 07:44:30 gripir Initializing CPU#0 Sep 10 07:44:30 gripir PID hash table entries: 4096 (order: 12, 16384 bytes) Sep 10 07:44:30 gripir Detected 1999.617 MHz processor. Sep 10 07:44:30 gripir Using pmtmr for high-res timesource Sep 10 07:44:30 gripir Console: colour dummy device 80x25 Sep 10 07:44:30 gripir Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Sep 10 07:44:30 gripir Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Sep 10 07:44:30 gripir Memory: 1034156k/1048512k available (2409k kernel code, 13576k reserved, 715k data, 240k init, 131008k highmem) Sep 10 07:44:30 gripir Checking if this processor honours the WP bit even in supervisor mode... Ok. Sep 10 07:44:30 gripir Calibrating delay using timer specific routine.. 4001.51 BogoMIPS (lpj=8003038) Sep 10 07:44:30 gripir Security Framework v1.0.0 initialized Sep 10 07:44:30 gripir Mount-cache hash table entries: 512 Sep 10 07:44:30 gripir CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Sep 10 07:44:30 gripir CPU: L2 Cache: 512K (64 bytes/line) Sep 10 07:44:30 gripir Intel machine check architecture supported. Sep 10 07:44:30 gripir Intel machine check reporting enabled on CPU#0. Sep 10 07:44:30 gripir Checking 'hlt' instruction... OK. Sep 10 07:44:30 gripir SMP alternatives: switching to UP code Sep 10 07:44:30 gripir Freeing SMP alternatives: 16k freed Sep 10 07:44:30 gripir checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Sep 10 07:44:30 gripir Freeing initrd memory: 840k freed Sep 10 07:44:30 gripir ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. Sep 10 07:44:30 gripir CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 0a Sep 10 07:44:30 gripir Total of 1 processors activated (4001.51 BogoMIPS). Sep 10 07:44:30 gripir ENABLING IO-APIC IRQs Sep 10 07:44:30 gripir ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Sep 10 07:44:30 gripir Brought up 1 CPUs Sep 10 07:44:30 gripir migration_cost=0 Sep 10 07:44:30 gripir NET: Registered protocol family 16 Sep 10 07:44:30 gripir ACPI: bus type pci registered Sep 10 07:44:30 gripir PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=1 Sep 10 07:44:30 gripir Setting up standard PCI resources Sep 10 07:44:30 gripir ACPI: Subsystem revision 20060127 Sep 10 07:44:30 gripir ACPI: Interpreter enabled Sep 10 07:44:30 gripir ACPI: Using IOAPIC for interrupt routing Sep 10 07:44:30 gripir ACPI: PCI Root Bridge [PCI0] (0000:00) Sep 10 07:44:30 gripir ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Sep 10 07:44:30 gripir ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) Sep 10 07:44:30 gripir ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 10 07:44:30 gripir ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. Sep 10 07:44:30 gripir ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 10 07:44:30 gripir ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 10 07:44:30 gripir ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 10 07:44:30 gripir ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Sep 10 07:44:30 gripir ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) Sep 10 07:44:30 gripir Linux Plug and Play Support v0.97 (c) Adam Belay Sep 10 07:44:30 gripir pnp: PnP ACPI init Sep 10 07:44:30 gripir pnp: PnP ACPI: found 10 devices Sep 10 07:44:30 gripir SCSI subsystem initialized Sep 10 07:44:30 gripir PCI: Using ACPI for IRQ routing Sep 10 07:44:30 gripir PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Sep 10 07:44:30 gripir PCI: Bridge: 0000:00:01.0 Sep 10 07:44:30 gripir IO window: disabled. Sep 10 07:44:30 gripir MEM window: e4000000-e5ffffff Sep 10 07:44:30 gripir PREFETCH window: d0000000-dfffffff Sep 10 07:44:30 gripir NET: Registered protocol family 2 Sep 10 07:44:30 gripir IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Sep 10 07:44:30 gripir TCP established hash table entries: 131072 (order: 8, 1572864 bytes) Sep 10 07:44:30 gripir TCP bind hash table entries: 65536 (order: 7, 786432 bytes) Sep 10 07:44:30 gripir TCP: Hash tables configured (established 131072 bind 65536) Sep 10 07:44:30 gripir TCP reno registered Sep 10 07:44:30 gripir apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) Sep 10 07:44:30 gripir apm: overridden by ACPI. Sep 10 07:44:30 gripir highmem bounce pool size: 64 pages Sep 10 07:44:30 gripir VFS: Disk quotas dquot_6.5.1 Sep 10 07:44:30 gripir Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Sep 10 07:44:30 gripir Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Sep 10 07:44:30 gripir Initializing Cryptographic API Sep 10 07:44:30 gripir io scheduler noop registered Sep 10 07:44:30 gripir io scheduler anticipatory registered (default) Sep 10 07:44:30 gripir io scheduler deadline registered Sep 10 07:44:30 gripir io scheduler cfq registered Sep 10 07:44:30 gripir vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 262144k Sep 10 07:44:30 gripir vesafb: mode is 1024x768x8, linelength=1024, pages=3 Sep 10 07:44:30 gripir vesafb: protected mode interface info at c000:e2e0 Sep 10 07:44:30 gripir vesafb: scrolling: redraw Sep 10 07:44:30 gripir vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Sep 10 07:44:30 gripir Console: switching to colour frame buffer device 128x48 Sep 10 07:44:30 gripir fb0: VESA VGA frame buffer device Sep 10 07:44:30 gripir ACPI: Power Button (FF) [PWRF] Sep 10 07:44:30 gripir ACPI: Power Button (CM) [PWRB] Sep 10 07:44:30 gripir ACPI: Sleep Button (CM) [FUTS] Sep 10 07:44:30 gripir ACPI: Fan [FAN] (on) Sep 10 07:44:30 gripir ACPI: Thermal Zone [THRM] (40 C) Sep 10 07:44:30 gripir isapnp: Scanning for PnP cards... Sep 10 07:44:30 gripir isapnp: No Plug & Play device found Sep 10 07:44:30 gripir Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled Sep 10 07:44:30 gripir serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 10 07:44:30 gripir 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 10 07:44:30 gripir Floppy drive(s): fd0 is 1.44M Sep 10 07:44:30 gripir FDC 0 is a post-1991 82077 Sep 10 07:44:30 gripir RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Sep 10 07:44:30 gripir loop: loaded (max 8 devices) Sep 10 07:44:30 gripir PNP: No PS/2 controller found. Probing ports directly. Sep 10 07:44:30 gripir serio: i8042 AUX port at 0x60,0x64 irq 12 Sep 10 07:44:30 gripir serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 10 07:44:30 gripir mice: PS/2 mouse device common for all mice Sep 10 07:44:30 gripir TCP bic registered Sep 10 07:44:30 gripir NET: Registered protocol family 1 Sep 10 07:44:30 gripir NET: Registered protocol family 17 Sep 10 07:44:30 gripir Using IPI No-Shortcut mode Sep 10 07:44:30 gripir ACPI wakeup devices: Sep 10 07:44:30 gripir FUTS PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 Sep 10 07:44:30 gripir ACPI: (supports S0 S1 S4 S5) Sep 10 07:44:30 gripir RAMDISK: Compressed image found at block 0 Sep 10 07:44:30 gripir VFS: Mounted root (ext2 filesystem). Sep 10 07:44:30 gripir Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Sep 10 07:44:30 gripir ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Sep 10 07:44:30 gripir SIS5513: IDE controller at PCI slot 0000:00:02.5 Sep 10 07:44:30 gripir SIS5513: chipset revision 1 Sep 10 07:44:30 gripir SIS5513: not 100% native mode: will probe irqs later Sep 10 07:44:30 gripir SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller Sep 10 07:44:30 gripir ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio Sep 10 07:44:30 gripir ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio Sep 10 07:44:30 gripir hda: ST340810A, ATA DISK drive Sep 10 07:44:30 gripir ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Sep 10 07:44:30 gripir hdc: CD-950E/TKU, ATAPI CD/DVD-ROM drive Sep 10 07:44:30 gripir hdd: AOPEN DUW1616/ARR, ATAPI CD/DVD-ROM drive Sep 10 07:44:30 gripir ide1 at 0x170-0x177,0x376 on irq 15 Sep 10 07:44:30 gripir hda: max request size: 128KiB Sep 10 07:44:30 gripir hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) Sep 10 07:44:30 gripir hda: cache flushes not supported Sep 10 07:44:30 gripir hda: hda1 hda2 hda3 Sep 10 07:44:30 gripir ide-floppy driver 0.99.newide Sep 10 07:44:30 gripir sata_sis 0000:00:05.0: version 0.5 Sep 10 07:44:30 gripir ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 10 07:44:30 gripir sata_sis 0000:00:05.0: Detected SiS 180/181 chipset in SATA mode Sep 10 07:44:30 gripir ata1: SATA max UDMA/133 cmd 0xE100 ctl 0xE202 bmdma 0xE500 irq 16 Sep 10 07:44:30 gripir ata2: SATA max UDMA/133 cmd 0xE300 ctl 0xE402 bmdma 0xE508 irq 16 Sep 10 07:44:30 gripir ata1: SATA link up 1.5 Gbps (SStatus 113) Sep 10 07:44:30 gripir ata1: dev 0 ATA-6, max UDMA/100, 321672960 sectors: LBA48 Sep 10 07:44:30 gripir ata1: dev 0 configured for UDMA/100 Sep 10 07:44:30 gripir scsi0 : sata_sis Sep 10 07:44:30 gripir ata2: SATA link down (SStatus 0) Sep 10 07:44:30 gripir scsi1 : sata_sis Sep 10 07:44:30 gripir Vendor: ATA Model: HDS722516VLSA80 Rev: V34O Sep 10 07:44:30 gripir Type: Direct-Access ANSI SCSI revision: 05 Sep 10 07:44:30 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 10 07:44:30 gripir sda: Write Protect is off Sep 10 07:44:30 gripir SCSI device sda: drive cache: write back Sep 10 07:44:30 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 10 07:44:30 gripir sda: Write Protect is off Sep 10 07:44:30 gripir SCSI device sda: drive cache: write back Sep 10 07:44:30 gripir sda: sda1 Sep 10 07:44:30 gripir sd 0:0:0:0: Attached scsi disk sda Sep 10 07:44:30 gripir ReiserFS: hda3: found reiserfs format "3.6" with standard journal Sep 10 07:44:30 gripir ReiserFS: hda3: using ordered data mode Sep 10 07:44:30 gripir ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Sep 10 07:44:30 gripir ReiserFS: hda3: checking transaction log (hda3) Sep 10 07:44:30 gripir ReiserFS: hda3: Using r5 hash to sort names Sep 10 07:44:30 gripir Freeing unused kernel memory: 240k freed Sep 10 07:44:30 gripir usbcore: registered new driver usbfs Sep 10 07:44:30 gripir usbcore: registered new driver hub Sep 10 07:44:30 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 10 07:44:30 gripir ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 10 07:44:30 gripir input: PC Speaker as /class/input/input0 Sep 10 07:44:30 gripir hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) Sep 10 07:44:30 gripir Uniform CD-ROM driver Revision: 3.20 Sep 10 07:44:30 gripir hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Sep 10 07:44:30 gripir CSLIP: code copyright 1989 Regents of the University of California Sep 10 07:44:30 gripir PPP generic driver version 2.4.2 Sep 10 07:44:30 gripir parport: PnPBIOS parport detected. Sep 10 07:44:30 gripir parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] Sep 10 07:44:30 gripir ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 17 Sep 10 07:44:30 gripir ohci_hcd 0000:00:03.0: OHCI Host Controller Sep 10 07:44:30 gripir ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 Sep 10 07:44:30 gripir ohci_hcd 0000:00:03.0: irq 17, io mem 0xe6024000 Sep 10 07:44:30 gripir Linux agpgart interface v0.101 (c) Dave Jones Sep 10 07:44:30 gripir usb usb1: configuration #1 chosen from 1 choice Sep 10 07:44:30 gripir hub 1-0:1.0: USB hub found Sep 10 07:44:30 gripir hub 1-0:1.0: 3 ports detected Sep 10 07:44:30 gripir ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 18 Sep 10 07:44:30 gripir ohci_hcd 0000:00:03.1: OHCI Host Controller Sep 10 07:44:30 gripir ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 Sep 10 07:44:30 gripir ohci_hcd 0000:00:03.1: irq 18, io mem 0xe6020000 Sep 10 07:44:30 gripir usb usb2: configuration #1 chosen from 1 choice Sep 10 07:44:30 gripir hub 2-0:1.0: USB hub found Sep 10 07:44:30 gripir hub 2-0:1.0: 3 ports detected Sep 10 07:44:30 gripir ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 19 Sep 10 07:44:30 gripir ohci_hcd 0000:00:03.2: OHCI Host Controller Sep 10 07:44:30 gripir ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 Sep 10 07:44:30 gripir ohci_hcd 0000:00:03.2: irq 19, io mem 0xe6021000 Sep 10 07:44:30 gripir usb usb3: configuration #1 chosen from 1 choice Sep 10 07:44:30 gripir hub 3-0:1.0: USB hub found Sep 10 07:44:30 gripir hub 3-0:1.0: 2 ports detected Sep 10 07:44:30 gripir usb 1-1: new low speed USB device using ohci_hcd and address 2 Sep 10 07:44:30 gripir usb 1-1: configuration #1 chosen from 1 choice Sep 10 07:44:30 gripir nvidia: module license 'NVIDIA' taints kernel. Sep 10 07:44:30 gripir ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20 Sep 10 07:44:30 gripir NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774 Tue Aug 1 20:54:08 PDT 2006 Sep 10 07:44:30 gripir gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xe800, speed 1242kHz Sep 10 07:44:30 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 10 07:44:30 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 10 07:44:30 gripir ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 21 Sep 10 07:44:30 gripir ehci_hcd 0000:00:03.3: EHCI Host Controller Sep 10 07:44:30 gripir ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4 Sep 10 07:44:30 gripir ehci_hcd 0000:00:03.3: irq 21, io mem 0xe6022000 Sep 10 07:44:30 gripir ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Sep 10 07:44:30 gripir usb usb4: configuration #1 chosen from 1 choice Sep 10 07:44:30 gripir hub 4-0:1.0: USB hub found Sep 10 07:44:30 gripir hub 4-0:1.0: 8 ports detected Sep 10 07:44:30 gripir usb 2-1: new low speed USB device using ohci_hcd and address 2 Sep 10 07:44:30 gripir Linux video capture interface: v1.00 Sep 10 07:44:30 gripir usb 1-1: USB disconnect, address 2 Sep 10 07:44:30 gripir lp0: using parport0 (interrupt-driven). Sep 10 07:44:30 gripir Real Time Clock Driver v1.12ac Sep 10 07:44:30 gripir agpgart: Detected AGP bridge 0 Sep 10 07:44:30 gripir agpgart: AGP aperture is 64M @ 0xe0000000 Sep 10 07:44:30 gripir sis900.c: v1.08.09 Sep. 19 2005 Sep 10 07:44:30 gripir ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 22 Sep 10 07:44:30 gripir 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. Sep 10 07:44:30 gripir 0000:00:04.0: Using transceiver found at address 1 as default Sep 10 07:44:30 gripir eth0: SiS 900 PCI Fast Ethernet at 0xe000, IRQ 22, 00:11:5b:4a:0d:e2. Sep 10 07:44:30 gripir saa7130/34: v4l2 driver version 0.2.14 loaded Sep 10 07:44:30 gripir ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 22 Sep 10 07:44:30 gripir saa7134[0]: found at 0000:00:0d.0, rev: 1, irq: 22, latency: 32, mmio: 0xe6026000 Sep 10 07:44:30 gripir saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected] Sep 10 07:44:30 gripir saa7134[0]: board init: gpio is 0 Sep 10 07:44:30 gripir ppdev: user-space parallel port driver Sep 10 07:44:30 gripir saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9 Sep 10 07:44:30 gripir saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00 Sep 10 07:44:30 gripir saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 07:44:30 gripir saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 07:44:30 gripir saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 07:44:30 gripir saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 07:44:30 gripir saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 07:44:30 gripir saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 07:44:30 gripir pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Sep 10 07:44:30 gripir saa7134[0] Tuner type is 38 Sep 10 07:44:30 gripir ohci_hcd 0000:00:03.0: wakeup Sep 10 07:44:30 gripir usbcore: registered new driver hiddev Sep 10 07:44:30 gripir tuner 0-0060: All bytes are equal. It is not a TEA5767 Sep 10 07:44:30 gripir tuner 0-0060: chip found @ 0xc0 (saa7134[0]) Sep 10 07:44:30 gripir tuner 0-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) Sep 10 07:44:30 gripir tda9887 0-0043: chip found @ 0x86 (saa7134[0]) Sep 10 07:44:30 gripir saa7134[0]: registered device video0 [v4l2] Sep 10 07:44:30 gripir saa7134[0]: registered device vbi0 Sep 10 07:44:30 gripir saa7134[0]: registered device radio0 Sep 10 07:44:30 gripir shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Sep 10 07:44:30 gripir ohci_hcd 0000:00:03.1: wakeup Sep 10 07:44:30 gripir ohci_hcd 0000:00:03.2: wakeup Sep 10 07:44:30 gripir usbcore: registered new driver usbhid Sep 10 07:44:30 gripir drivers/usb/input/hid-core.c: v2.6:USB HID core driver Sep 10 07:44:30 gripir usb 1-1: new low speed USB device using ohci_hcd and address 3 Sep 10 07:44:30 gripir usb 1-1: configuration #1 chosen from 1 choice Sep 10 07:44:30 gripir input: Microsoft® Office Keyboard as /class/input/input1 Sep 10 07:44:30 gripir input: USB HID v1.10 Keyboard [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 10 07:44:30 gripir NTFS driver 2.1.27 [Flags: R/W MODULE]. Sep 10 07:44:30 gripir input: Microsoft® Office Keyboard as /class/input/input2 Sep 10 07:44:30 gripir input: USB HID v1.10 Device [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 10 07:44:30 gripir NTFS volume version 3.1. Sep 10 07:44:30 gripir usb 2-1: new low speed USB device using ohci_hcd and address 3 Sep 10 07:44:30 gripir kjournald starting. Commit interval 5 seconds Sep 10 07:44:30 gripir EXT3 FS on sda1, internal journal Sep 10 07:44:30 gripir EXT3-fs: mounted filesystem with ordered data mode. Sep 10 07:44:30 gripir Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 across:498004k Sep 10 07:44:30 gripir usb 2-1: configuration #1 chosen from 1 choice Sep 10 07:44:30 gripir input: Logitech USB-PS/2 Optical Mouse as /class/input/input3 Sep 10 07:44:30 gripir input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.1-1 Sep 10 07:44:30 gripir usb 3-1: new full speed USB device using ohci_hcd and address 2 Sep 10 07:44:30 gripir usb 3-1: configuration #1 chosen from 1 choice Sep 10 07:44:30 gripir prism2usb_init: prism2_usb.o: 0.2.3 Loaded Sep 10 07:44:30 gripir prism2usb_init: dev_info is: prism2_usb Sep 10 07:44:30 gripir usb 3-1: reset full speed USB device using ohci_hcd and address 2 Sep 10 07:44:30 gripir usbcore: registered new driver prism2_usb Sep 10 07:44:30 gripir ident: nic h/w: id=0x8026 1.0.0 Sep 10 07:44:30 gripir ident: pri f/w: id=0x15 1.1.3 Sep 10 07:44:30 gripir ident: sta f/w: id=0x1f 1.7.1 Sep 10 07:44:30 gripir MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1 Sep 10 07:44:30 gripir CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1 Sep 10 07:44:30 gripir PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/4 Sep 10 07:44:30 gripir STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/12 Sep 10 07:44:30 gripir PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 10 07:44:30 gripir STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 10 07:44:30 gripir STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1 Sep 10 07:44:30 gripir Prism2 card SN: 000000000000 Sep 10 07:44:31 gripir linkstatus=CONNECTED Sep 10 07:44:41 gripir NVRM: not using NVAGP, an AGPGART backend is loaded! Sep 10 07:44:55 gripir (gripir-2794): (Version 2.14.0) wird gestartet, Prozesskennung 2794, Benutzer »gripir« Sep 10 07:44:55 gripir (gripir-2794): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 10 07:44:55 gripir (gripir-2794): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 10 07:44:55 gripir (gripir-2794): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 10 07:45:03 gripir (gripir-2794): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 0 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 10 07:45:09 gripir NET: Registered protocol family 10 Sep 10 07:45:09 gripir lo: Disabled Privacy Extensions Sep 10 07:45:09 gripir IPv6 over IPv4 tunneling driver Sep 10 11:41:28 gripir (gripir-2794): Beenden Sep 10 11:41:28 gripir gdm[2732]: Master wird angehalten... Sep 10 11:41:28 gripir shutdown[2732]: shutting down for system halt Sep 10 11:41:29 gripir init: Switching to runlevel: 0 Sep 10 18:08:23 gripir Linux version 2.6.17-ARCH (root@Wohnung) (gcc version 4.1.1) #1 SMP PREEMPT Sat Jul 1 10:16:16 CEST 2006 Sep 10 18:08:23 gripir BIOS-provided physical RAM map: Sep 10 18:08:23 gripir BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Sep 10 18:08:23 gripir BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Sep 10 18:08:23 gripir BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Sep 10 18:08:23 gripir BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) Sep 10 18:08:23 gripir BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) Sep 10 18:08:23 gripir BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) Sep 10 18:08:23 gripir BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Sep 10 18:08:23 gripir BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Sep 10 18:08:23 gripir BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Sep 10 18:08:23 gripir 127MB HIGHMEM available. Sep 10 18:08:23 gripir 896MB LOWMEM available. Sep 10 18:08:23 gripir found SMP MP-table at 000f5570 Sep 10 18:08:23 gripir DMI 2.2 present. Sep 10 18:08:23 gripir ACPI: PM-Timer IO Port: 0x1008 Sep 10 18:08:23 gripir ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Sep 10 18:08:23 gripir Processor #0 15:4 APIC version 16 Sep 10 18:08:23 gripir ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Sep 10 18:08:23 gripir ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Sep 10 18:08:23 gripir IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 Sep 10 18:08:23 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Sep 10 18:08:23 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) Sep 10 18:08:23 gripir Enabling APIC mode: Flat. Using 1 I/O APICs Sep 10 18:08:23 gripir Using ACPI (MADT) for SMP configuration information Sep 10 18:08:23 gripir Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Sep 10 18:08:23 gripir Built 1 zonelists Sep 10 18:08:23 gripir Kernel command line: root=/dev/hda3 ro vga=773 Sep 10 18:08:23 gripir Enabling fast FPU save and restore... done. Sep 10 18:08:23 gripir Enabling unmasked SIMD FPU exception support... done. Sep 10 18:08:23 gripir Initializing CPU#0 Sep 10 18:08:23 gripir PID hash table entries: 4096 (order: 12, 16384 bytes) Sep 10 18:08:23 gripir Detected 1999.630 MHz processor. Sep 10 18:08:23 gripir Using pmtmr for high-res timesource Sep 10 18:08:23 gripir Console: colour dummy device 80x25 Sep 10 18:08:23 gripir Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Sep 10 18:08:23 gripir Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Sep 10 18:08:23 gripir Memory: 1034156k/1048512k available (2409k kernel code, 13576k reserved, 715k data, 240k init, 131008k highmem) Sep 10 18:08:23 gripir Checking if this processor honours the WP bit even in supervisor mode... Ok. Sep 10 18:08:23 gripir Calibrating delay using timer specific routine.. 4001.52 BogoMIPS (lpj=8003043) Sep 10 18:08:23 gripir Security Framework v1.0.0 initialized Sep 10 18:08:23 gripir Mount-cache hash table entries: 512 Sep 10 18:08:23 gripir CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Sep 10 18:08:23 gripir CPU: L2 Cache: 512K (64 bytes/line) Sep 10 18:08:23 gripir Intel machine check architecture supported. Sep 10 18:08:23 gripir Intel machine check reporting enabled on CPU#0. Sep 10 18:08:23 gripir Checking 'hlt' instruction... OK. Sep 10 18:08:23 gripir SMP alternatives: switching to UP code Sep 10 18:08:23 gripir Freeing SMP alternatives: 16k freed Sep 10 18:08:23 gripir checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Sep 10 18:08:23 gripir Freeing initrd memory: 840k freed Sep 10 18:08:23 gripir ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. Sep 10 18:08:23 gripir CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 0a Sep 10 18:08:23 gripir Total of 1 processors activated (4001.52 BogoMIPS). Sep 10 18:08:23 gripir ENABLING IO-APIC IRQs Sep 10 18:08:23 gripir ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Sep 10 18:08:23 gripir Brought up 1 CPUs Sep 10 18:08:23 gripir migration_cost=0 Sep 10 18:08:23 gripir NET: Registered protocol family 16 Sep 10 18:08:23 gripir ACPI: bus type pci registered Sep 10 18:08:23 gripir PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=1 Sep 10 18:08:23 gripir Setting up standard PCI resources Sep 10 18:08:23 gripir ACPI: Subsystem revision 20060127 Sep 10 18:08:23 gripir ACPI: Interpreter enabled Sep 10 18:08:23 gripir ACPI: Using IOAPIC for interrupt routing Sep 10 18:08:23 gripir ACPI: PCI Root Bridge [PCI0] (0000:00) Sep 10 18:08:23 gripir ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Sep 10 18:08:23 gripir ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) Sep 10 18:08:23 gripir ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 10 18:08:23 gripir ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. Sep 10 18:08:23 gripir ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 10 18:08:23 gripir ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 10 18:08:23 gripir ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 10 18:08:23 gripir ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Sep 10 18:08:23 gripir ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) Sep 10 18:08:23 gripir Linux Plug and Play Support v0.97 (c) Adam Belay Sep 10 18:08:23 gripir pnp: PnP ACPI init Sep 10 18:08:23 gripir pnp: PnP ACPI: found 10 devices Sep 10 18:08:23 gripir SCSI subsystem initialized Sep 10 18:08:23 gripir PCI: Using ACPI for IRQ routing Sep 10 18:08:23 gripir PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Sep 10 18:08:23 gripir PCI: Bridge: 0000:00:01.0 Sep 10 18:08:23 gripir IO window: disabled. Sep 10 18:08:23 gripir MEM window: e4000000-e5ffffff Sep 10 18:08:23 gripir PREFETCH window: d0000000-dfffffff Sep 10 18:08:23 gripir NET: Registered protocol family 2 Sep 10 18:08:23 gripir IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Sep 10 18:08:23 gripir TCP established hash table entries: 131072 (order: 8, 1572864 bytes) Sep 10 18:08:23 gripir TCP bind hash table entries: 65536 (order: 7, 786432 bytes) Sep 10 18:08:23 gripir TCP: Hash tables configured (established 131072 bind 65536) Sep 10 18:08:23 gripir TCP reno registered Sep 10 18:08:23 gripir apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) Sep 10 18:08:23 gripir apm: overridden by ACPI. Sep 10 18:08:23 gripir highmem bounce pool size: 64 pages Sep 10 18:08:23 gripir VFS: Disk quotas dquot_6.5.1 Sep 10 18:08:23 gripir Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Sep 10 18:08:23 gripir Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Sep 10 18:08:23 gripir Initializing Cryptographic API Sep 10 18:08:23 gripir io scheduler noop registered Sep 10 18:08:23 gripir io scheduler anticipatory registered (default) Sep 10 18:08:23 gripir io scheduler deadline registered Sep 10 18:08:23 gripir io scheduler cfq registered Sep 10 18:08:23 gripir vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 262144k Sep 10 18:08:23 gripir vesafb: mode is 1024x768x8, linelength=1024, pages=3 Sep 10 18:08:23 gripir vesafb: protected mode interface info at c000:e2e0 Sep 10 18:08:23 gripir vesafb: scrolling: redraw Sep 10 18:08:23 gripir vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Sep 10 18:08:23 gripir Console: switching to colour frame buffer device 128x48 Sep 10 18:08:23 gripir fb0: VESA VGA frame buffer device Sep 10 18:08:23 gripir ACPI: Power Button (FF) [PWRF] Sep 10 18:08:23 gripir ACPI: Power Button (CM) [PWRB] Sep 10 18:08:23 gripir ACPI: Sleep Button (CM) [FUTS] Sep 10 18:08:23 gripir ACPI: Fan [FAN] (on) Sep 10 18:08:23 gripir ACPI: Thermal Zone [THRM] (40 C) Sep 10 18:08:23 gripir isapnp: Scanning for PnP cards... Sep 10 18:08:23 gripir isapnp: No Plug & Play device found Sep 10 18:08:23 gripir Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled Sep 10 18:08:23 gripir serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 10 18:08:23 gripir 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 10 18:08:23 gripir Floppy drive(s): fd0 is 1.44M Sep 10 18:08:23 gripir FDC 0 is a post-1991 82077 Sep 10 18:08:23 gripir RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Sep 10 18:08:23 gripir loop: loaded (max 8 devices) Sep 10 18:08:23 gripir PNP: No PS/2 controller found. Probing ports directly. Sep 10 18:08:23 gripir serio: i8042 AUX port at 0x60,0x64 irq 12 Sep 10 18:08:23 gripir serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 10 18:08:23 gripir mice: PS/2 mouse device common for all mice Sep 10 18:08:23 gripir TCP bic registered Sep 10 18:08:23 gripir NET: Registered protocol family 1 Sep 10 18:08:23 gripir NET: Registered protocol family 17 Sep 10 18:08:23 gripir Using IPI No-Shortcut mode Sep 10 18:08:23 gripir ACPI wakeup devices: Sep 10 18:08:23 gripir FUTS PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 Sep 10 18:08:23 gripir ACPI: (supports S0 S1 S4 S5) Sep 10 18:08:23 gripir RAMDISK: Compressed image found at block 0 Sep 10 18:08:23 gripir VFS: Mounted root (ext2 filesystem). Sep 10 18:08:23 gripir Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Sep 10 18:08:23 gripir ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Sep 10 18:08:23 gripir SIS5513: IDE controller at PCI slot 0000:00:02.5 Sep 10 18:08:23 gripir SIS5513: chipset revision 1 Sep 10 18:08:23 gripir SIS5513: not 100% native mode: will probe irqs later Sep 10 18:08:23 gripir SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller Sep 10 18:08:23 gripir ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio Sep 10 18:08:23 gripir ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio Sep 10 18:08:23 gripir hda: ST340810A, ATA DISK drive Sep 10 18:08:23 gripir ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Sep 10 18:08:23 gripir hdc: CD-950E/TKU, ATAPI CD/DVD-ROM drive Sep 10 18:08:23 gripir hdd: AOPEN DUW1616/ARR, ATAPI CD/DVD-ROM drive Sep 10 18:08:23 gripir ide1 at 0x170-0x177,0x376 on irq 15 Sep 10 18:08:23 gripir hda: max request size: 128KiB Sep 10 18:08:23 gripir hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) Sep 10 18:08:23 gripir hda: cache flushes not supported Sep 10 18:08:23 gripir hda: hda1 hda2 hda3 Sep 10 18:08:23 gripir ide-floppy driver 0.99.newide Sep 10 18:08:23 gripir sata_sis 0000:00:05.0: version 0.5 Sep 10 18:08:23 gripir ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 10 18:08:23 gripir sata_sis 0000:00:05.0: Detected SiS 180/181 chipset in SATA mode Sep 10 18:08:23 gripir ata1: SATA max UDMA/133 cmd 0xE100 ctl 0xE202 bmdma 0xE500 irq 16 Sep 10 18:08:23 gripir ata2: SATA max UDMA/133 cmd 0xE300 ctl 0xE402 bmdma 0xE508 irq 16 Sep 10 18:08:23 gripir ata1: SATA link up 1.5 Gbps (SStatus 113) Sep 10 18:08:23 gripir ata1: dev 0 ATA-6, max UDMA/100, 321672960 sectors: LBA48 Sep 10 18:08:23 gripir ata1: dev 0 configured for UDMA/100 Sep 10 18:08:23 gripir scsi0 : sata_sis Sep 10 18:08:23 gripir ata2: SATA link down (SStatus 0) Sep 10 18:08:23 gripir scsi1 : sata_sis Sep 10 18:08:23 gripir Vendor: ATA Model: HDS722516VLSA80 Rev: V34O Sep 10 18:08:23 gripir Type: Direct-Access ANSI SCSI revision: 05 Sep 10 18:08:23 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 10 18:08:23 gripir sda: Write Protect is off Sep 10 18:08:23 gripir SCSI device sda: drive cache: write back Sep 10 18:08:23 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 10 18:08:23 gripir sda: Write Protect is off Sep 10 18:08:23 gripir SCSI device sda: drive cache: write back Sep 10 18:08:23 gripir sda: sda1 Sep 10 18:08:23 gripir sd 0:0:0:0: Attached scsi disk sda Sep 10 18:08:23 gripir ReiserFS: hda3: found reiserfs format "3.6" with standard journal Sep 10 18:08:23 gripir ReiserFS: hda3: using ordered data mode Sep 10 18:08:23 gripir ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Sep 10 18:08:23 gripir ReiserFS: hda3: checking transaction log (hda3) Sep 10 18:08:23 gripir ReiserFS: hda3: Using r5 hash to sort names Sep 10 18:08:23 gripir Freeing unused kernel memory: 240k freed Sep 10 18:08:23 gripir usbcore: registered new driver usbfs Sep 10 18:08:23 gripir usbcore: registered new driver hub Sep 10 18:08:23 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 10 18:08:23 gripir ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 10 18:08:23 gripir hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) Sep 10 18:08:23 gripir Uniform CD-ROM driver Revision: 3.20 Sep 10 18:08:23 gripir CSLIP: code copyright 1989 Regents of the University of California Sep 10 18:08:23 gripir Linux agpgart interface v0.101 (c) Dave Jones Sep 10 18:08:23 gripir hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Sep 10 18:08:23 gripir nvidia: module license 'NVIDIA' taints kernel. Sep 10 18:08:23 gripir ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17 Sep 10 18:08:23 gripir NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774 Tue Aug 1 20:54:08 PDT 2006 Sep 10 18:08:23 gripir input: PC Speaker as /class/input/input0 Sep 10 18:08:23 gripir parport: PnPBIOS parport detected. Sep 10 18:08:23 gripir parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] Sep 10 18:08:23 gripir PPP generic driver version 2.4.2 Sep 10 18:08:23 gripir ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 18 Sep 10 18:08:23 gripir ehci_hcd 0000:00:03.3: EHCI Host Controller Sep 10 18:08:23 gripir ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 Sep 10 18:08:23 gripir ehci_hcd 0000:00:03.3: irq 18, io mem 0xe6022000 Sep 10 18:08:23 gripir ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Sep 10 18:08:23 gripir usb usb1: configuration #1 chosen from 1 choice Sep 10 18:08:23 gripir hub 1-0:1.0: USB hub found Sep 10 18:08:23 gripir hub 1-0:1.0: 8 ports detected Sep 10 18:08:23 gripir ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 19 Sep 10 18:08:23 gripir ohci_hcd 0000:00:03.0: OHCI Host Controller Sep 10 18:08:23 gripir ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 Sep 10 18:08:23 gripir ohci_hcd 0000:00:03.0: irq 19, io mem 0xe6024000 Sep 10 18:08:23 gripir usb usb2: configuration #1 chosen from 1 choice Sep 10 18:08:23 gripir hub 2-0:1.0: USB hub found Sep 10 18:08:23 gripir hub 2-0:1.0: 3 ports detected Sep 10 18:08:23 gripir sis900.c: v1.08.09 Sep. 19 2005 Sep 10 18:08:23 gripir ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 20 Sep 10 18:08:23 gripir ohci_hcd 0000:00:03.1: OHCI Host Controller Sep 10 18:08:23 gripir ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 Sep 10 18:08:23 gripir ohci_hcd 0000:00:03.1: irq 20, io mem 0xe6020000 Sep 10 18:08:23 gripir Real Time Clock Driver v1.12ac Sep 10 18:08:23 gripir usb usb3: configuration #1 chosen from 1 choice Sep 10 18:08:23 gripir hub 3-0:1.0: USB hub found Sep 10 18:08:23 gripir hub 3-0:1.0: 3 ports detected Sep 10 18:08:23 gripir Linux video capture interface: v1.00 Sep 10 18:08:23 gripir ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 21 Sep 10 18:08:23 gripir ohci_hcd 0000:00:03.2: OHCI Host Controller Sep 10 18:08:23 gripir ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 Sep 10 18:08:23 gripir ohci_hcd 0000:00:03.2: irq 21, io mem 0xe6021000 Sep 10 18:08:23 gripir usb usb4: configuration #1 chosen from 1 choice Sep 10 18:08:23 gripir hub 4-0:1.0: USB hub found Sep 10 18:08:23 gripir hub 4-0:1.0: 2 ports detected Sep 10 18:08:23 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 10 18:08:23 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 10 18:08:23 gripir ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 22 Sep 10 18:08:23 gripir 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. Sep 10 18:08:23 gripir 0000:00:04.0: Using transceiver found at address 1 as default Sep 10 18:08:23 gripir eth0: SiS 900 PCI Fast Ethernet at 0xe000, IRQ 22, 00:11:5b:4a:0d:e2. Sep 10 18:08:23 gripir gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xe800, speed 1242kHz Sep 10 18:08:23 gripir agpgart: Detected AGP bridge 0 Sep 10 18:08:23 gripir agpgart: AGP aperture is 64M @ 0xe0000000 Sep 10 18:08:23 gripir saa7130/34: v4l2 driver version 0.2.14 loaded Sep 10 18:08:23 gripir ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 22 Sep 10 18:08:23 gripir saa7134[0]: found at 0000:00:0d.0, rev: 1, irq: 22, latency: 32, mmio: 0xe6026000 Sep 10 18:08:23 gripir saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected] Sep 10 18:08:23 gripir saa7134[0]: board init: gpio is 0 Sep 10 18:08:23 gripir usb 2-1: new low speed USB device using ohci_hcd and address 2 Sep 10 18:08:23 gripir lp0: using parport0 (interrupt-driven). Sep 10 18:08:23 gripir saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9 Sep 10 18:08:23 gripir saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00 Sep 10 18:08:23 gripir saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 18:08:23 gripir saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 18:08:23 gripir saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 18:08:23 gripir saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 18:08:23 gripir saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 18:08:23 gripir saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 18:08:23 gripir ppdev: user-space parallel port driver Sep 10 18:08:23 gripir saa7134[0] Tuner type is 38 Sep 10 18:08:23 gripir usb 2-1: configuration #1 chosen from 1 choice Sep 10 18:08:23 gripir pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Sep 10 18:08:23 gripir tuner 0-0060: All bytes are equal. It is not a TEA5767 Sep 10 18:08:23 gripir tuner 0-0060: chip found @ 0xc0 (saa7134[0]) Sep 10 18:08:23 gripir tuner 0-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) Sep 10 18:08:23 gripir usb 3-1: new low speed USB device using ohci_hcd and address 2 Sep 10 18:08:23 gripir tda9887 0-0043: chip found @ 0x86 (saa7134[0]) Sep 10 18:08:23 gripir saa7134[0]: registered device video0 [v4l2] Sep 10 18:08:23 gripir saa7134[0]: registered device vbi0 Sep 10 18:08:23 gripir saa7134[0]: registered device radio0 Sep 10 18:08:23 gripir usb 3-1: configuration #1 chosen from 1 choice Sep 10 18:08:23 gripir shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Sep 10 18:08:23 gripir usb 4-1: new full speed USB device using ohci_hcd and address 2 Sep 10 18:08:23 gripir usb 4-1: configuration #1 chosen from 1 choice Sep 10 18:08:23 gripir usbcore: registered new driver hiddev Sep 10 18:08:23 gripir input: Microsoft® Office Keyboard as /class/input/input1 Sep 10 18:08:23 gripir input: USB HID v1.10 Keyboard [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 10 18:08:23 gripir input: Microsoft® Office Keyboard as /class/input/input2 Sep 10 18:08:23 gripir input: USB HID v1.10 Device [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 10 18:08:23 gripir input: Logitech USB-PS/2 Optical Mouse as /class/input/input3 Sep 10 18:08:23 gripir input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.1-1 Sep 10 18:08:23 gripir usbcore: registered new driver usbhid Sep 10 18:08:23 gripir drivers/usb/input/hid-core.c: v2.6:USB HID core driver Sep 10 18:08:23 gripir prism2usb_init: prism2_usb.o: 0.2.3 Loaded Sep 10 18:08:23 gripir prism2usb_init: dev_info is: prism2_usb Sep 10 18:08:23 gripir usb 4-1: reset full speed USB device using ohci_hcd and address 2 Sep 10 18:08:23 gripir usbcore: registered new driver prism2_usb Sep 10 18:08:23 gripir NTFS driver 2.1.27 [Flags: R/W MODULE]. Sep 10 18:08:23 gripir NTFS volume version 3.1. Sep 10 18:08:23 gripir kjournald starting. Commit interval 5 seconds Sep 10 18:08:23 gripir EXT3 FS on sda1, internal journal Sep 10 18:08:23 gripir EXT3-fs: mounted filesystem with ordered data mode. Sep 10 18:08:23 gripir Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 across:498004k Sep 10 18:08:24 gripir ident: nic h/w: id=0x8026 1.0.0 Sep 10 18:08:24 gripir ident: pri f/w: id=0x15 1.1.3 Sep 10 18:08:24 gripir ident: sta f/w: id=0x1f 1.7.1 Sep 10 18:08:24 gripir MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1 Sep 10 18:08:24 gripir CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1 Sep 10 18:08:24 gripir PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/4 Sep 10 18:08:24 gripir STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/12 Sep 10 18:08:24 gripir PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 10 18:08:24 gripir STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 10 18:08:24 gripir STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1 Sep 10 18:08:24 gripir Prism2 card SN: 000000000000 Sep 10 18:08:25 gripir linkstatus=CONNECTED Sep 10 18:08:34 gripir NVRM: not using NVAGP, an AGPGART backend is loaded! Sep 10 18:08:47 gripir (gripir-2741): (Version 2.14.0) wird gestartet, Prozesskennung 2741, Benutzer »gripir« Sep 10 18:08:48 gripir (gripir-2741): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 10 18:08:48 gripir (gripir-2741): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 10 18:08:48 gripir (gripir-2741): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 10 18:08:56 gripir (gripir-2741): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 0 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 10 18:09:03 gripir NET: Registered protocol family 10 Sep 10 18:09:03 gripir lo: Disabled Privacy Extensions Sep 10 18:09:03 gripir IPv6 over IPv4 tunneling driver Sep 10 18:24:40 gripir cdrom: This disc doesn't have any tracks I recognize! Sep 10 19:28:51 gripir NET: Registered protocol family 4 Sep 10 19:56:01 gripir cdrom: This disc doesn't have any tracks I recognize! Sep 10 20:36:21 gripir Linux version 2.6.17-ARCH (root@Wohnung) (gcc version 4.1.1) #1 SMP PREEMPT Sat Jul 1 10:16:16 CEST 2006 Sep 10 20:36:21 gripir BIOS-provided physical RAM map: Sep 10 20:36:21 gripir BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Sep 10 20:36:21 gripir BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Sep 10 20:36:21 gripir BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Sep 10 20:36:21 gripir BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) Sep 10 20:36:21 gripir BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) Sep 10 20:36:21 gripir BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) Sep 10 20:36:21 gripir BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Sep 10 20:36:21 gripir BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Sep 10 20:36:21 gripir BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Sep 10 20:36:21 gripir 127MB HIGHMEM available. Sep 10 20:36:21 gripir 896MB LOWMEM available. Sep 10 20:36:21 gripir found SMP MP-table at 000f5570 Sep 10 20:36:21 gripir DMI 2.2 present. Sep 10 20:36:21 gripir ACPI: PM-Timer IO Port: 0x1008 Sep 10 20:36:21 gripir ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Sep 10 20:36:21 gripir Processor #0 15:4 APIC version 16 Sep 10 20:36:21 gripir ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Sep 10 20:36:21 gripir ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Sep 10 20:36:21 gripir IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 Sep 10 20:36:21 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Sep 10 20:36:21 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) Sep 10 20:36:21 gripir Enabling APIC mode: Flat. Using 1 I/O APICs Sep 10 20:36:21 gripir Using ACPI (MADT) for SMP configuration information Sep 10 20:36:21 gripir Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Sep 10 20:36:21 gripir Built 1 zonelists Sep 10 20:36:21 gripir Kernel command line: root=/dev/hda3 ro vga=773 Sep 10 20:36:21 gripir Enabling fast FPU save and restore... done. Sep 10 20:36:21 gripir Enabling unmasked SIMD FPU exception support... done. Sep 10 20:36:21 gripir Initializing CPU#0 Sep 10 20:36:21 gripir PID hash table entries: 4096 (order: 12, 16384 bytes) Sep 10 20:36:21 gripir Detected 1999.632 MHz processor. Sep 10 20:36:21 gripir Using pmtmr for high-res timesource Sep 10 20:36:21 gripir Console: colour dummy device 80x25 Sep 10 20:36:21 gripir Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Sep 10 20:36:21 gripir Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Sep 10 20:36:21 gripir Memory: 1034156k/1048512k available (2409k kernel code, 13576k reserved, 715k data, 240k init, 131008k highmem) Sep 10 20:36:21 gripir Checking if this processor honours the WP bit even in supervisor mode... Ok. Sep 10 20:36:21 gripir Calibrating delay using timer specific routine.. 4001.57 BogoMIPS (lpj=8003158) Sep 10 20:36:21 gripir Security Framework v1.0.0 initialized Sep 10 20:36:21 gripir Mount-cache hash table entries: 512 Sep 10 20:36:21 gripir CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Sep 10 20:36:21 gripir CPU: L2 Cache: 512K (64 bytes/line) Sep 10 20:36:21 gripir Intel machine check architecture supported. Sep 10 20:36:21 gripir Intel machine check reporting enabled on CPU#0. Sep 10 20:36:21 gripir Checking 'hlt' instruction... OK. Sep 10 20:36:21 gripir SMP alternatives: switching to UP code Sep 10 20:36:21 gripir Freeing SMP alternatives: 16k freed Sep 10 20:36:21 gripir checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Sep 10 20:36:21 gripir Freeing initrd memory: 840k freed Sep 10 20:36:21 gripir ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. Sep 10 20:36:21 gripir CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 0a Sep 10 20:36:21 gripir Total of 1 processors activated (4001.57 BogoMIPS). Sep 10 20:36:21 gripir ENABLING IO-APIC IRQs Sep 10 20:36:21 gripir ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Sep 10 20:36:21 gripir Brought up 1 CPUs Sep 10 20:36:21 gripir migration_cost=0 Sep 10 20:36:21 gripir NET: Registered protocol family 16 Sep 10 20:36:21 gripir ACPI: bus type pci registered Sep 10 20:36:21 gripir PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=1 Sep 10 20:36:21 gripir Setting up standard PCI resources Sep 10 20:36:21 gripir ACPI: Subsystem revision 20060127 Sep 10 20:36:21 gripir ACPI: Interpreter enabled Sep 10 20:36:21 gripir ACPI: Using IOAPIC for interrupt routing Sep 10 20:36:21 gripir ACPI: PCI Root Bridge [PCI0] (0000:00) Sep 10 20:36:21 gripir ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Sep 10 20:36:21 gripir ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) Sep 10 20:36:21 gripir ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 10 20:36:21 gripir ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. Sep 10 20:36:21 gripir ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 10 20:36:21 gripir ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 10 20:36:21 gripir ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 10 20:36:21 gripir ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Sep 10 20:36:21 gripir ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) Sep 10 20:36:21 gripir Linux Plug and Play Support v0.97 (c) Adam Belay Sep 10 20:36:21 gripir pnp: PnP ACPI init Sep 10 20:36:21 gripir pnp: PnP ACPI: found 10 devices Sep 10 20:36:21 gripir SCSI subsystem initialized Sep 10 20:36:21 gripir PCI: Using ACPI for IRQ routing Sep 10 20:36:21 gripir PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Sep 10 20:36:21 gripir PCI: Bridge: 0000:00:01.0 Sep 10 20:36:21 gripir IO window: disabled. Sep 10 20:36:21 gripir MEM window: e4000000-e5ffffff Sep 10 20:36:21 gripir PREFETCH window: d0000000-dfffffff Sep 10 20:36:21 gripir NET: Registered protocol family 2 Sep 10 20:36:21 gripir IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Sep 10 20:36:21 gripir TCP established hash table entries: 131072 (order: 8, 1572864 bytes) Sep 10 20:36:21 gripir TCP bind hash table entries: 65536 (order: 7, 786432 bytes) Sep 10 20:36:21 gripir TCP: Hash tables configured (established 131072 bind 65536) Sep 10 20:36:21 gripir TCP reno registered Sep 10 20:36:21 gripir apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) Sep 10 20:36:21 gripir apm: overridden by ACPI. Sep 10 20:36:21 gripir highmem bounce pool size: 64 pages Sep 10 20:36:21 gripir VFS: Disk quotas dquot_6.5.1 Sep 10 20:36:21 gripir Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Sep 10 20:36:21 gripir Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Sep 10 20:36:21 gripir Initializing Cryptographic API Sep 10 20:36:21 gripir io scheduler noop registered Sep 10 20:36:21 gripir io scheduler anticipatory registered (default) Sep 10 20:36:21 gripir io scheduler deadline registered Sep 10 20:36:21 gripir io scheduler cfq registered Sep 10 20:36:21 gripir vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 262144k Sep 10 20:36:21 gripir vesafb: mode is 1024x768x8, linelength=1024, pages=3 Sep 10 20:36:21 gripir vesafb: protected mode interface info at c000:e2e0 Sep 10 20:36:21 gripir vesafb: scrolling: redraw Sep 10 20:36:21 gripir vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Sep 10 20:36:21 gripir Console: switching to colour frame buffer device 128x48 Sep 10 20:36:21 gripir fb0: VESA VGA frame buffer device Sep 10 20:36:21 gripir ACPI: Power Button (FF) [PWRF] Sep 10 20:36:21 gripir ACPI: Power Button (CM) [PWRB] Sep 10 20:36:21 gripir ACPI: Sleep Button (CM) [FUTS] Sep 10 20:36:21 gripir ACPI: Fan [FAN] (on) Sep 10 20:36:21 gripir ACPI: Thermal Zone [THRM] (40 C) Sep 10 20:36:21 gripir isapnp: Scanning for PnP cards... Sep 10 20:36:21 gripir isapnp: No Plug & Play device found Sep 10 20:36:21 gripir Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled Sep 10 20:36:21 gripir serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 10 20:36:21 gripir 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 10 20:36:21 gripir Floppy drive(s): fd0 is 1.44M Sep 10 20:36:21 gripir FDC 0 is a post-1991 82077 Sep 10 20:36:21 gripir RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Sep 10 20:36:21 gripir loop: loaded (max 8 devices) Sep 10 20:36:21 gripir PNP: No PS/2 controller found. Probing ports directly. Sep 10 20:36:21 gripir serio: i8042 AUX port at 0x60,0x64 irq 12 Sep 10 20:36:21 gripir serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 10 20:36:21 gripir mice: PS/2 mouse device common for all mice Sep 10 20:36:21 gripir TCP bic registered Sep 10 20:36:21 gripir NET: Registered protocol family 1 Sep 10 20:36:21 gripir NET: Registered protocol family 17 Sep 10 20:36:21 gripir Using IPI No-Shortcut mode Sep 10 20:36:21 gripir ACPI wakeup devices: Sep 10 20:36:21 gripir FUTS PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 Sep 10 20:36:21 gripir ACPI: (supports S0 S1 S4 S5) Sep 10 20:36:21 gripir RAMDISK: Compressed image found at block 0 Sep 10 20:36:21 gripir VFS: Mounted root (ext2 filesystem). Sep 10 20:36:21 gripir Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Sep 10 20:36:21 gripir ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Sep 10 20:36:21 gripir SIS5513: IDE controller at PCI slot 0000:00:02.5 Sep 10 20:36:21 gripir SIS5513: chipset revision 1 Sep 10 20:36:21 gripir SIS5513: not 100% native mode: will probe irqs later Sep 10 20:36:21 gripir SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller Sep 10 20:36:21 gripir ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio Sep 10 20:36:21 gripir ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio Sep 10 20:36:21 gripir hda: ST340810A, ATA DISK drive Sep 10 20:36:21 gripir ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Sep 10 20:36:21 gripir hdc: CD-950E/TKU, ATAPI CD/DVD-ROM drive Sep 10 20:36:21 gripir hdd: AOPEN DUW1616/ARR, ATAPI CD/DVD-ROM drive Sep 10 20:36:21 gripir ide1 at 0x170-0x177,0x376 on irq 15 Sep 10 20:36:21 gripir hda: max request size: 128KiB Sep 10 20:36:21 gripir hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) Sep 10 20:36:21 gripir hda: cache flushes not supported Sep 10 20:36:21 gripir hda: hda1 hda2 hda3 Sep 10 20:36:21 gripir ide-floppy driver 0.99.newide Sep 10 20:36:21 gripir sata_sis 0000:00:05.0: version 0.5 Sep 10 20:36:21 gripir ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 10 20:36:21 gripir sata_sis 0000:00:05.0: Detected SiS 180/181 chipset in SATA mode Sep 10 20:36:21 gripir ata1: SATA max UDMA/133 cmd 0xE100 ctl 0xE202 bmdma 0xE500 irq 16 Sep 10 20:36:21 gripir ata2: SATA max UDMA/133 cmd 0xE300 ctl 0xE402 bmdma 0xE508 irq 16 Sep 10 20:36:21 gripir ata1: SATA link up 1.5 Gbps (SStatus 113) Sep 10 20:36:21 gripir ata1: dev 0 ATA-6, max UDMA/100, 321672960 sectors: LBA48 Sep 10 20:36:21 gripir ata1: dev 0 configured for UDMA/100 Sep 10 20:36:21 gripir scsi0 : sata_sis Sep 10 20:36:21 gripir ata2: SATA link down (SStatus 0) Sep 10 20:36:21 gripir scsi1 : sata_sis Sep 10 20:36:21 gripir Vendor: ATA Model: HDS722516VLSA80 Rev: V34O Sep 10 20:36:21 gripir Type: Direct-Access ANSI SCSI revision: 05 Sep 10 20:36:21 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 10 20:36:21 gripir sda: Write Protect is off Sep 10 20:36:21 gripir SCSI device sda: drive cache: write back Sep 10 20:36:21 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 10 20:36:21 gripir sda: Write Protect is off Sep 10 20:36:21 gripir SCSI device sda: drive cache: write back Sep 10 20:36:21 gripir sda: sda1 Sep 10 20:36:21 gripir sd 0:0:0:0: Attached scsi disk sda Sep 10 20:36:21 gripir ReiserFS: hda3: found reiserfs format "3.6" with standard journal Sep 10 20:36:21 gripir ReiserFS: hda3: using ordered data mode Sep 10 20:36:21 gripir ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Sep 10 20:36:21 gripir ReiserFS: hda3: checking transaction log (hda3) Sep 10 20:36:21 gripir ReiserFS: hda3: replayed 24 transactions in 0 seconds Sep 10 20:36:21 gripir ReiserFS: hda3: Using r5 hash to sort names Sep 10 20:36:21 gripir Freeing unused kernel memory: 240k freed Sep 10 20:36:21 gripir usbcore: registered new driver usbfs Sep 10 20:36:21 gripir usbcore: registered new driver hub Sep 10 20:36:21 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 10 20:36:21 gripir ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 10 20:36:21 gripir hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) Sep 10 20:36:21 gripir Uniform CD-ROM driver Revision: 3.20 Sep 10 20:36:21 gripir input: PC Speaker as /class/input/input0 Sep 10 20:36:21 gripir gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xe800, speed 1242kHz Sep 10 20:36:21 gripir hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Sep 10 20:36:21 gripir CSLIP: code copyright 1989 Regents of the University of California Sep 10 20:36:21 gripir PPP generic driver version 2.4.2 Sep 10 20:36:21 gripir Linux agpgart interface v0.101 (c) Dave Jones Sep 10 20:36:21 gripir nvidia: module license 'NVIDIA' taints kernel. Sep 10 20:36:21 gripir ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17 Sep 10 20:36:21 gripir NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774 Tue Aug 1 20:54:08 PDT 2006 Sep 10 20:36:21 gripir parport: PnPBIOS parport detected. Sep 10 20:36:21 gripir parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] Sep 10 20:36:21 gripir ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 18 Sep 10 20:36:21 gripir ehci_hcd 0000:00:03.3: EHCI Host Controller Sep 10 20:36:21 gripir ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 Sep 10 20:36:21 gripir ehci_hcd 0000:00:03.3: irq 18, io mem 0xe6022000 Sep 10 20:36:21 gripir ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Sep 10 20:36:21 gripir usb usb1: configuration #1 chosen from 1 choice Sep 10 20:36:21 gripir hub 1-0:1.0: USB hub found Sep 10 20:36:21 gripir hub 1-0:1.0: 8 ports detected Sep 10 20:36:21 gripir sis900.c: v1.08.09 Sep. 19 2005 Sep 10 20:36:21 gripir ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19 Sep 10 20:36:21 gripir 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. Sep 10 20:36:21 gripir 0000:00:04.0: Using transceiver found at address 1 as default Sep 10 20:36:21 gripir eth0: SiS 900 PCI Fast Ethernet at 0xe000, IRQ 19, 00:11:5b:4a:0d:e2. Sep 10 20:36:21 gripir ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20 Sep 10 20:36:21 gripir ohci_hcd 0000:00:03.0: OHCI Host Controller Sep 10 20:36:21 gripir ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 Sep 10 20:36:21 gripir ohci_hcd 0000:00:03.0: irq 20, io mem 0xe6024000 Sep 10 20:36:21 gripir Linux video capture interface: v1.00 Sep 10 20:36:21 gripir usb usb2: configuration #1 chosen from 1 choice Sep 10 20:36:21 gripir hub 2-0:1.0: USB hub found Sep 10 20:36:21 gripir hub 2-0:1.0: 3 ports detected Sep 10 20:36:21 gripir ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21 Sep 10 20:36:21 gripir ohci_hcd 0000:00:03.1: OHCI Host Controller Sep 10 20:36:21 gripir ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 Sep 10 20:36:21 gripir ohci_hcd 0000:00:03.1: irq 21, io mem 0xe6020000 Sep 10 20:36:21 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 10 20:36:21 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 10 20:36:21 gripir usb usb3: configuration #1 chosen from 1 choice Sep 10 20:36:21 gripir hub 3-0:1.0: USB hub found Sep 10 20:36:21 gripir hub 3-0:1.0: 3 ports detected Sep 10 20:36:21 gripir saa7130/34: v4l2 driver version 0.2.14 loaded Sep 10 20:36:21 gripir Real Time Clock Driver v1.12ac Sep 10 20:36:21 gripir ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22 Sep 10 20:36:21 gripir ohci_hcd 0000:00:03.2: OHCI Host Controller Sep 10 20:36:21 gripir ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 Sep 10 20:36:21 gripir ohci_hcd 0000:00:03.2: irq 22, io mem 0xe6021000 Sep 10 20:36:21 gripir pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Sep 10 20:36:21 gripir usb usb4: configuration #1 chosen from 1 choice Sep 10 20:36:21 gripir hub 4-0:1.0: USB hub found Sep 10 20:36:21 gripir hub 4-0:1.0: 2 ports detected Sep 10 20:36:21 gripir ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 19 Sep 10 20:36:21 gripir saa7134[0]: found at 0000:00:0d.0, rev: 1, irq: 19, latency: 32, mmio: 0xe6026000 Sep 10 20:36:21 gripir saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected] Sep 10 20:36:21 gripir saa7134[0]: board init: gpio is 0 Sep 10 20:36:21 gripir saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9 Sep 10 20:36:21 gripir saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00 Sep 10 20:36:21 gripir saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 20:36:21 gripir saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 20:36:21 gripir saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 20:36:21 gripir saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 20:36:21 gripir saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 20:36:21 gripir saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 20:36:21 gripir lp0: using parport0 (interrupt-driven). Sep 10 20:36:21 gripir saa7134[0] Tuner type is 38 Sep 10 20:36:21 gripir usb 2-1: new low speed USB device using ohci_hcd and address 2 Sep 10 20:36:21 gripir ppdev: user-space parallel port driver Sep 10 20:36:21 gripir tuner 0-0060: All bytes are equal. It is not a TEA5767 Sep 10 20:36:21 gripir tuner 0-0060: chip found @ 0xc0 (saa7134[0]) Sep 10 20:36:21 gripir tuner 0-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) Sep 10 20:36:21 gripir tda9887 0-0043: chip found @ 0x86 (saa7134[0]) Sep 10 20:36:21 gripir saa7134[0]: registered device video0 [v4l2] Sep 10 20:36:21 gripir saa7134[0]: registered device vbi0 Sep 10 20:36:21 gripir saa7134[0]: registered device radio0 Sep 10 20:36:21 gripir agpgart: Detected AGP bridge 0 Sep 10 20:36:21 gripir agpgart: AGP aperture is 64M @ 0xe0000000 Sep 10 20:36:21 gripir shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Sep 10 20:36:21 gripir usb 2-1: configuration #1 chosen from 1 choice Sep 10 20:36:21 gripir usb 3-1: new low speed USB device using ohci_hcd and address 2 Sep 10 20:36:21 gripir usb 3-1: configuration #1 chosen from 1 choice Sep 10 20:36:21 gripir usb 4-1: new full speed USB device using ohci_hcd and address 2 Sep 10 20:36:21 gripir usb 4-1: configuration #1 chosen from 1 choice Sep 10 20:36:21 gripir usbcore: registered new driver hiddev Sep 10 20:36:21 gripir input: Microsoft® Office Keyboard as /class/input/input1 Sep 10 20:36:21 gripir input: USB HID v1.10 Keyboard [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 10 20:36:21 gripir input: Microsoft® Office Keyboard as /class/input/input2 Sep 10 20:36:21 gripir input: USB HID v1.10 Device [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 10 20:36:21 gripir input: Logitech USB-PS/2 Optical Mouse as /class/input/input3 Sep 10 20:36:21 gripir input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.1-1 Sep 10 20:36:21 gripir usbcore: registered new driver usbhid Sep 10 20:36:21 gripir drivers/usb/input/hid-core.c: v2.6:USB HID core driver Sep 10 20:36:21 gripir prism2usb_init: prism2_usb.o: 0.2.3 Loaded Sep 10 20:36:21 gripir prism2usb_init: dev_info is: prism2_usb Sep 10 20:36:21 gripir usb 4-1: reset full speed USB device using ohci_hcd and address 2 Sep 10 20:36:21 gripir usbcore: registered new driver prism2_usb Sep 10 20:36:21 gripir NTFS driver 2.1.27 [Flags: R/W MODULE]. Sep 10 20:36:21 gripir NTFS volume version 3.1. Sep 10 20:36:21 gripir kjournald starting. Commit interval 5 seconds Sep 10 20:36:21 gripir EXT3 FS on sda1, internal journal Sep 10 20:36:21 gripir EXT3-fs: mounted filesystem with ordered data mode. Sep 10 20:36:21 gripir Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 across:498004k Sep 10 20:36:22 gripir ident: nic h/w: id=0x8026 1.0.0 Sep 10 20:36:22 gripir ident: pri f/w: id=0x15 1.1.3 Sep 10 20:36:22 gripir ident: sta f/w: id=0x1f 1.7.1 Sep 10 20:36:22 gripir MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1 Sep 10 20:36:22 gripir CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1 Sep 10 20:36:22 gripir PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/4 Sep 10 20:36:22 gripir STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/12 Sep 10 20:36:22 gripir PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 10 20:36:22 gripir STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 10 20:36:22 gripir STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1 Sep 10 20:36:22 gripir Prism2 card SN: 000000000000 Sep 10 20:36:22 gripir linkstatus=CONNECTED Sep 10 20:36:30 gripir NVRM: not using NVAGP, an AGPGART backend is loaded! Sep 10 20:36:43 gripir (gripir-2747): (Version 2.14.0) wird gestartet, Prozesskennung 2747, Benutzer »gripir« Sep 10 20:36:43 gripir (gripir-2747): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 10 20:36:43 gripir (gripir-2747): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 10 20:36:43 gripir (gripir-2747): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 10 20:36:50 gripir (gripir-2747): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 0 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 10 20:36:57 gripir NET: Registered protocol family 10 Sep 10 20:36:57 gripir lo: Disabled Privacy Extensions Sep 10 20:36:57 gripir IPv6 over IPv4 tunneling driver Sep 10 20:37:26 gripir gdm[2651]: Master wird angehalten... Sep 10 20:37:26 gripir (gripir-2747): Beenden Sep 10 20:37:27 gripir shutdown[2651]: shutting down for system halt Sep 10 20:37:27 gripir init: Switching to runlevel: 0 Sep 10 20:38:11 gripir Linux version 2.6.17-ARCH (root@Wohnung) (gcc version 4.1.1) #1 SMP PREEMPT Sat Jul 1 10:16:16 CEST 2006 Sep 10 20:38:11 gripir BIOS-provided physical RAM map: Sep 10 20:38:11 gripir BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Sep 10 20:38:11 gripir BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Sep 10 20:38:11 gripir BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Sep 10 20:38:11 gripir BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) Sep 10 20:38:11 gripir BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) Sep 10 20:38:11 gripir BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) Sep 10 20:38:11 gripir BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Sep 10 20:38:11 gripir BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Sep 10 20:38:11 gripir BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Sep 10 20:38:11 gripir 127MB HIGHMEM available. Sep 10 20:38:11 gripir 896MB LOWMEM available. Sep 10 20:38:11 gripir found SMP MP-table at 000f5570 Sep 10 20:38:11 gripir DMI 2.2 present. Sep 10 20:38:11 gripir ACPI: PM-Timer IO Port: 0x1008 Sep 10 20:38:11 gripir ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Sep 10 20:38:11 gripir Processor #0 15:4 APIC version 16 Sep 10 20:38:11 gripir ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Sep 10 20:38:11 gripir ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Sep 10 20:38:11 gripir IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 Sep 10 20:38:11 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Sep 10 20:38:11 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) Sep 10 20:38:11 gripir Enabling APIC mode: Flat. Using 1 I/O APICs Sep 10 20:38:11 gripir Using ACPI (MADT) for SMP configuration information Sep 10 20:38:11 gripir Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Sep 10 20:38:11 gripir Built 1 zonelists Sep 10 20:38:11 gripir Kernel command line: root=/dev/hda3 ro vga=773 Sep 10 20:38:11 gripir Enabling fast FPU save and restore... done. Sep 10 20:38:11 gripir Enabling unmasked SIMD FPU exception support... done. Sep 10 20:38:11 gripir Initializing CPU#0 Sep 10 20:38:11 gripir PID hash table entries: 4096 (order: 12, 16384 bytes) Sep 10 20:38:11 gripir Detected 1999.617 MHz processor. Sep 10 20:38:11 gripir Using pmtmr for high-res timesource Sep 10 20:38:11 gripir Console: colour dummy device 80x25 Sep 10 20:38:11 gripir Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Sep 10 20:38:11 gripir Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Sep 10 20:38:11 gripir Memory: 1034156k/1048512k available (2409k kernel code, 13576k reserved, 715k data, 240k init, 131008k highmem) Sep 10 20:38:11 gripir Checking if this processor honours the WP bit even in supervisor mode... Ok. Sep 10 20:38:11 gripir Calibrating delay using timer specific routine.. 4001.52 BogoMIPS (lpj=8003044) Sep 10 20:38:11 gripir Security Framework v1.0.0 initialized Sep 10 20:38:11 gripir Mount-cache hash table entries: 512 Sep 10 20:38:11 gripir CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Sep 10 20:38:11 gripir CPU: L2 Cache: 512K (64 bytes/line) Sep 10 20:38:11 gripir Intel machine check architecture supported. Sep 10 20:38:11 gripir Intel machine check reporting enabled on CPU#0. Sep 10 20:38:11 gripir Checking 'hlt' instruction... OK. Sep 10 20:38:11 gripir SMP alternatives: switching to UP code Sep 10 20:38:11 gripir Freeing SMP alternatives: 16k freed Sep 10 20:38:11 gripir checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Sep 10 20:38:11 gripir Freeing initrd memory: 840k freed Sep 10 20:38:11 gripir ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. Sep 10 20:38:11 gripir CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 0a Sep 10 20:38:11 gripir Total of 1 processors activated (4001.52 BogoMIPS). Sep 10 20:38:11 gripir ENABLING IO-APIC IRQs Sep 10 20:38:11 gripir ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Sep 10 20:38:11 gripir Brought up 1 CPUs Sep 10 20:38:11 gripir migration_cost=0 Sep 10 20:38:11 gripir NET: Registered protocol family 16 Sep 10 20:38:11 gripir ACPI: bus type pci registered Sep 10 20:38:11 gripir PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=1 Sep 10 20:38:11 gripir Setting up standard PCI resources Sep 10 20:38:11 gripir ACPI: Subsystem revision 20060127 Sep 10 20:38:11 gripir ACPI: Interpreter enabled Sep 10 20:38:11 gripir ACPI: Using IOAPIC for interrupt routing Sep 10 20:38:11 gripir ACPI: PCI Root Bridge [PCI0] (0000:00) Sep 10 20:38:11 gripir ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Sep 10 20:38:11 gripir ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) Sep 10 20:38:11 gripir ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 10 20:38:11 gripir ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. Sep 10 20:38:11 gripir ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 10 20:38:11 gripir ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 10 20:38:11 gripir ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 10 20:38:11 gripir ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Sep 10 20:38:11 gripir ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) Sep 10 20:38:11 gripir Linux Plug and Play Support v0.97 (c) Adam Belay Sep 10 20:38:11 gripir pnp: PnP ACPI init Sep 10 20:38:11 gripir pnp: PnP ACPI: found 10 devices Sep 10 20:38:11 gripir SCSI subsystem initialized Sep 10 20:38:11 gripir PCI: Using ACPI for IRQ routing Sep 10 20:38:11 gripir PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Sep 10 20:38:11 gripir PCI: Bridge: 0000:00:01.0 Sep 10 20:38:11 gripir IO window: disabled. Sep 10 20:38:11 gripir MEM window: e4000000-e5ffffff Sep 10 20:38:11 gripir PREFETCH window: d0000000-dfffffff Sep 10 20:38:11 gripir NET: Registered protocol family 2 Sep 10 20:38:11 gripir IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Sep 10 20:38:11 gripir TCP established hash table entries: 131072 (order: 8, 1572864 bytes) Sep 10 20:38:11 gripir TCP bind hash table entries: 65536 (order: 7, 786432 bytes) Sep 10 20:38:11 gripir TCP: Hash tables configured (established 131072 bind 65536) Sep 10 20:38:11 gripir TCP reno registered Sep 10 20:38:11 gripir apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) Sep 10 20:38:11 gripir apm: overridden by ACPI. Sep 10 20:38:11 gripir highmem bounce pool size: 64 pages Sep 10 20:38:11 gripir VFS: Disk quotas dquot_6.5.1 Sep 10 20:38:11 gripir Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Sep 10 20:38:11 gripir Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Sep 10 20:38:11 gripir Initializing Cryptographic API Sep 10 20:38:11 gripir io scheduler noop registered Sep 10 20:38:11 gripir io scheduler anticipatory registered (default) Sep 10 20:38:11 gripir io scheduler deadline registered Sep 10 20:38:11 gripir io scheduler cfq registered Sep 10 20:38:11 gripir vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 262144k Sep 10 20:38:11 gripir vesafb: mode is 1024x768x8, linelength=1024, pages=3 Sep 10 20:38:11 gripir vesafb: protected mode interface info at c000:e2e0 Sep 10 20:38:11 gripir vesafb: scrolling: redraw Sep 10 20:38:11 gripir vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Sep 10 20:38:11 gripir Console: switching to colour frame buffer device 128x48 Sep 10 20:38:11 gripir fb0: VESA VGA frame buffer device Sep 10 20:38:11 gripir ACPI: Power Button (FF) [PWRF] Sep 10 20:38:11 gripir ACPI: Power Button (CM) [PWRB] Sep 10 20:38:11 gripir ACPI: Sleep Button (CM) [FUTS] Sep 10 20:38:11 gripir ACPI: Fan [FAN] (on) Sep 10 20:38:11 gripir ACPI: Thermal Zone [THRM] (40 C) Sep 10 20:38:11 gripir isapnp: Scanning for PnP cards... Sep 10 20:38:11 gripir isapnp: No Plug & Play device found Sep 10 20:38:11 gripir Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled Sep 10 20:38:11 gripir serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 10 20:38:11 gripir 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 10 20:38:11 gripir Floppy drive(s): fd0 is 1.44M Sep 10 20:38:11 gripir FDC 0 is a post-1991 82077 Sep 10 20:38:11 gripir RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Sep 10 20:38:11 gripir loop: loaded (max 8 devices) Sep 10 20:38:11 gripir PNP: No PS/2 controller found. Probing ports directly. Sep 10 20:38:11 gripir serio: i8042 AUX port at 0x60,0x64 irq 12 Sep 10 20:38:11 gripir serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 10 20:38:11 gripir mice: PS/2 mouse device common for all mice Sep 10 20:38:11 gripir TCP bic registered Sep 10 20:38:11 gripir NET: Registered protocol family 1 Sep 10 20:38:11 gripir NET: Registered protocol family 17 Sep 10 20:38:11 gripir Using IPI No-Shortcut mode Sep 10 20:38:11 gripir ACPI wakeup devices: Sep 10 20:38:11 gripir FUTS PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 Sep 10 20:38:11 gripir ACPI: (supports S0 S1 S4 S5) Sep 10 20:38:11 gripir RAMDISK: Compressed image found at block 0 Sep 10 20:38:11 gripir VFS: Mounted root (ext2 filesystem). Sep 10 20:38:11 gripir Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Sep 10 20:38:11 gripir ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Sep 10 20:38:11 gripir SIS5513: IDE controller at PCI slot 0000:00:02.5 Sep 10 20:38:11 gripir SIS5513: chipset revision 1 Sep 10 20:38:11 gripir SIS5513: not 100% native mode: will probe irqs later Sep 10 20:38:11 gripir SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller Sep 10 20:38:11 gripir ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio Sep 10 20:38:11 gripir ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio Sep 10 20:38:11 gripir hda: ST340810A, ATA DISK drive Sep 10 20:38:11 gripir ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Sep 10 20:38:11 gripir hdc: CD-950E/TKU, ATAPI CD/DVD-ROM drive Sep 10 20:38:11 gripir hdd: AOPEN DUW1616/ARR, ATAPI CD/DVD-ROM drive Sep 10 20:38:11 gripir ide1 at 0x170-0x177,0x376 on irq 15 Sep 10 20:38:11 gripir hda: max request size: 128KiB Sep 10 20:38:11 gripir hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) Sep 10 20:38:11 gripir hda: cache flushes not supported Sep 10 20:38:11 gripir hda: hda1 hda2 hda3 Sep 10 20:38:11 gripir ide-floppy driver 0.99.newide Sep 10 20:38:11 gripir sata_sis 0000:00:05.0: version 0.5 Sep 10 20:38:11 gripir ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 10 20:38:11 gripir sata_sis 0000:00:05.0: Detected SiS 180/181 chipset in SATA mode Sep 10 20:38:11 gripir ata1: SATA max UDMA/133 cmd 0xE100 ctl 0xE202 bmdma 0xE500 irq 16 Sep 10 20:38:11 gripir ata2: SATA max UDMA/133 cmd 0xE300 ctl 0xE402 bmdma 0xE508 irq 16 Sep 10 20:38:11 gripir ata1: SATA link up 1.5 Gbps (SStatus 113) Sep 10 20:38:11 gripir ata1: dev 0 ATA-6, max UDMA/100, 321672960 sectors: LBA48 Sep 10 20:38:11 gripir ata1: dev 0 configured for UDMA/100 Sep 10 20:38:11 gripir scsi0 : sata_sis Sep 10 20:38:11 gripir ata2: SATA link down (SStatus 0) Sep 10 20:38:11 gripir scsi1 : sata_sis Sep 10 20:38:11 gripir Vendor: ATA Model: HDS722516VLSA80 Rev: V34O Sep 10 20:38:11 gripir Type: Direct-Access ANSI SCSI revision: 05 Sep 10 20:38:11 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 10 20:38:11 gripir sda: Write Protect is off Sep 10 20:38:11 gripir SCSI device sda: drive cache: write back Sep 10 20:38:11 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 10 20:38:11 gripir sda: Write Protect is off Sep 10 20:38:11 gripir SCSI device sda: drive cache: write back Sep 10 20:38:11 gripir sda: sda1 Sep 10 20:38:11 gripir sd 0:0:0:0: Attached scsi disk sda Sep 10 20:38:11 gripir ReiserFS: hda3: found reiserfs format "3.6" with standard journal Sep 10 20:38:11 gripir ReiserFS: hda3: using ordered data mode Sep 10 20:38:11 gripir ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Sep 10 20:38:11 gripir ReiserFS: hda3: checking transaction log (hda3) Sep 10 20:38:11 gripir ReiserFS: hda3: Using r5 hash to sort names Sep 10 20:38:11 gripir Freeing unused kernel memory: 240k freed Sep 10 20:38:11 gripir usbcore: registered new driver usbfs Sep 10 20:38:11 gripir usbcore: registered new driver hub Sep 10 20:38:11 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 10 20:38:11 gripir ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 10 20:38:11 gripir hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) Sep 10 20:38:11 gripir Uniform CD-ROM driver Revision: 3.20 Sep 10 20:38:11 gripir CSLIP: code copyright 1989 Regents of the University of California Sep 10 20:38:11 gripir PPP generic driver version 2.4.2 Sep 10 20:38:11 gripir input: PC Speaker as /class/input/input0 Sep 10 20:38:11 gripir hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Sep 10 20:38:11 gripir parport: PnPBIOS parport detected. Sep 10 20:38:11 gripir parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] Sep 10 20:38:11 gripir ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 17 Sep 10 20:38:11 gripir ehci_hcd 0000:00:03.3: EHCI Host Controller Sep 10 20:38:11 gripir ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 Sep 10 20:38:11 gripir ehci_hcd 0000:00:03.3: irq 17, io mem 0xe6022000 Sep 10 20:38:11 gripir ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Sep 10 20:38:11 gripir usb usb1: configuration #1 chosen from 1 choice Sep 10 20:38:11 gripir hub 1-0:1.0: USB hub found Sep 10 20:38:11 gripir hub 1-0:1.0: 8 ports detected Sep 10 20:38:11 gripir ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 18 Sep 10 20:38:11 gripir ohci_hcd 0000:00:03.0: OHCI Host Controller Sep 10 20:38:11 gripir ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 Sep 10 20:38:11 gripir ohci_hcd 0000:00:03.0: irq 18, io mem 0xe6024000 Sep 10 20:38:11 gripir Linux agpgart interface v0.101 (c) Dave Jones Sep 10 20:38:11 gripir usb usb2: configuration #1 chosen from 1 choice Sep 10 20:38:11 gripir hub 2-0:1.0: USB hub found Sep 10 20:38:11 gripir hub 2-0:1.0: 3 ports detected Sep 10 20:38:11 gripir ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 19 Sep 10 20:38:11 gripir ohci_hcd 0000:00:03.1: OHCI Host Controller Sep 10 20:38:11 gripir ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 Sep 10 20:38:11 gripir ohci_hcd 0000:00:03.1: irq 19, io mem 0xe6020000 Sep 10 20:38:11 gripir usb usb3: configuration #1 chosen from 1 choice Sep 10 20:38:11 gripir hub 3-0:1.0: USB hub found Sep 10 20:38:11 gripir hub 3-0:1.0: 3 ports detected Sep 10 20:38:11 gripir ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 20 Sep 10 20:38:11 gripir ohci_hcd 0000:00:03.2: OHCI Host Controller Sep 10 20:38:11 gripir ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 Sep 10 20:38:11 gripir ohci_hcd 0000:00:03.2: irq 20, io mem 0xe6021000 Sep 10 20:38:11 gripir usb usb4: configuration #1 chosen from 1 choice Sep 10 20:38:11 gripir hub 4-0:1.0: USB hub found Sep 10 20:38:11 gripir hub 4-0:1.0: 2 ports detected Sep 10 20:38:11 gripir nvidia: module license 'NVIDIA' taints kernel. Sep 10 20:38:11 gripir sis900.c: v1.08.09 Sep. 19 2005 Sep 10 20:38:11 gripir ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21 Sep 10 20:38:11 gripir NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774 Tue Aug 1 20:54:08 PDT 2006 Sep 10 20:38:11 gripir usb 2-1: new low speed USB device using ohci_hcd and address 2 Sep 10 20:38:11 gripir ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 22 Sep 10 20:38:11 gripir 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. Sep 10 20:38:11 gripir 0000:00:04.0: Using transceiver found at address 1 as default Sep 10 20:38:11 gripir eth0: SiS 900 PCI Fast Ethernet at 0xe000, IRQ 22, 00:11:5b:4a:0d:e2. Sep 10 20:38:11 gripir Linux video capture interface: v1.00 Sep 10 20:38:11 gripir usb 2-1: configuration #1 chosen from 1 choice Sep 10 20:38:11 gripir saa7130/34: v4l2 driver version 0.2.14 loaded Sep 10 20:38:11 gripir ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 22 Sep 10 20:38:11 gripir saa7134[0]: found at 0000:00:0d.0, rev: 1, irq: 22, latency: 32, mmio: 0xe6026000 Sep 10 20:38:11 gripir saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected] Sep 10 20:38:11 gripir saa7134[0]: board init: gpio is 0 Sep 10 20:38:11 gripir Real Time Clock Driver v1.12ac Sep 10 20:38:11 gripir saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9 Sep 10 20:38:11 gripir saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00 Sep 10 20:38:11 gripir saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 20:38:11 gripir saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 20:38:11 gripir saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 20:38:11 gripir saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 20:38:11 gripir saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 20:38:11 gripir saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 20:38:11 gripir saa7134[0] Tuner type is 38 Sep 10 20:38:11 gripir usb 3-1: new low speed USB device using ohci_hcd and address 2 Sep 10 20:38:11 gripir usb 3-1: configuration #1 chosen from 1 choice Sep 10 20:38:11 gripir tuner 0-0060: All bytes are equal. It is not a TEA5767 Sep 10 20:38:11 gripir tuner 0-0060: chip found @ 0xc0 (saa7134[0]) Sep 10 20:38:11 gripir tuner 0-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) Sep 10 20:38:11 gripir tda9887 0-0043: chip found @ 0x86 (saa7134[0]) Sep 10 20:38:11 gripir lp0: using parport0 (interrupt-driven). Sep 10 20:38:11 gripir ppdev: user-space parallel port driver Sep 10 20:38:11 gripir saa7134[0]: registered device video0 [v4l2] Sep 10 20:38:11 gripir saa7134[0]: registered device vbi0 Sep 10 20:38:11 gripir saa7134[0]: registered device radio0 Sep 10 20:38:11 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 10 20:38:11 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 10 20:38:11 gripir usb 4-1: new full speed USB device using ohci_hcd and address 2 Sep 10 20:38:11 gripir pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Sep 10 20:38:11 gripir usb 4-1: configuration #1 chosen from 1 choice Sep 10 20:38:11 gripir gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xe800, speed 1242kHz Sep 10 20:38:11 gripir agpgart: Detected AGP bridge 0 Sep 10 20:38:11 gripir agpgart: AGP aperture is 64M @ 0xe0000000 Sep 10 20:38:11 gripir usbcore: registered new driver hiddev Sep 10 20:38:11 gripir shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Sep 10 20:38:11 gripir input: Microsoft® Office Keyboard as /class/input/input1 Sep 10 20:38:11 gripir input: USB HID v1.10 Keyboard [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 10 20:38:11 gripir input: Microsoft® Office Keyboard as /class/input/input2 Sep 10 20:38:11 gripir input: USB HID v1.10 Device [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 10 20:38:11 gripir input: Logitech USB-PS/2 Optical Mouse as /class/input/input3 Sep 10 20:38:11 gripir input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.1-1 Sep 10 20:38:11 gripir usbcore: registered new driver usbhid Sep 10 20:38:11 gripir drivers/usb/input/hid-core.c: v2.6:USB HID core driver Sep 10 20:38:11 gripir prism2usb_init: prism2_usb.o: 0.2.3 Loaded Sep 10 20:38:11 gripir prism2usb_init: dev_info is: prism2_usb Sep 10 20:38:11 gripir usb 4-1: reset full speed USB device using ohci_hcd and address 2 Sep 10 20:38:11 gripir usbcore: registered new driver prism2_usb Sep 10 20:38:11 gripir NTFS driver 2.1.27 [Flags: R/W MODULE]. Sep 10 20:38:11 gripir NTFS volume version 3.1. Sep 10 20:38:11 gripir kjournald starting. Commit interval 5 seconds Sep 10 20:38:11 gripir EXT3 FS on sda1, internal journal Sep 10 20:38:11 gripir EXT3-fs: mounted filesystem with ordered data mode. Sep 10 20:38:11 gripir Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 across:498004k Sep 10 20:38:12 gripir ident: nic h/w: id=0x8026 1.0.0 Sep 10 20:38:12 gripir ident: pri f/w: id=0x15 1.1.3 Sep 10 20:38:12 gripir ident: sta f/w: id=0x1f 1.7.1 Sep 10 20:38:12 gripir MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1 Sep 10 20:38:12 gripir CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1 Sep 10 20:38:12 gripir PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/4 Sep 10 20:38:12 gripir STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/12 Sep 10 20:38:12 gripir PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 10 20:38:12 gripir STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 10 20:38:12 gripir STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1 Sep 10 20:38:12 gripir Prism2 card SN: 000000000000 Sep 10 20:38:12 gripir linkstatus=CONNECTED Sep 10 20:38:21 gripir NVRM: not using NVAGP, an AGPGART backend is loaded! Sep 10 20:38:34 gripir (gripir-2740): (Version 2.14.0) wird gestartet, Prozesskennung 2740, Benutzer »gripir« Sep 10 20:38:34 gripir (gripir-2740): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 10 20:38:34 gripir (gripir-2740): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 10 20:38:34 gripir (gripir-2740): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 10 20:38:41 gripir (gripir-2740): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 0 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 10 20:38:48 gripir NET: Registered protocol family 10 Sep 10 20:38:48 gripir lo: Disabled Privacy Extensions Sep 10 20:38:48 gripir IPv6 over IPv4 tunneling driver Sep 10 20:39:08 gripir hfa384x_usbctlx_complete_sync: CTLX[3] error: state(Request failed) Sep 10 20:39:08 gripir usb 4-1: USB disconnect, address 2 Sep 10 20:39:09 gripir ohci_hcd 0000:00:03.2: wakeup Sep 10 20:39:09 gripir usb 4-1: new full speed USB device using ohci_hcd and address 3 Sep 10 20:39:10 gripir usb 4-1: configuration #1 chosen from 1 choice Sep 10 20:39:10 gripir usb 4-1: reset full speed USB device using ohci_hcd and address 3 Sep 10 20:39:10 gripir usb 2-1: USB disconnect, address 2 Sep 10 20:39:13 gripir ohci_hcd 0000:00:03.0: wakeup Sep 10 20:39:13 gripir usb 2-1: new low speed USB device using ohci_hcd and address 3 Sep 10 20:39:13 gripir usb 2-1: configuration #1 chosen from 1 choice Sep 10 20:39:13 gripir input: Microsoft® Office Keyboard as /class/input/input4 Sep 10 20:39:13 gripir input: USB HID v1.10 Keyboard [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 10 20:39:14 gripir input: Microsoft® Office Keyboard as /class/input/input5 Sep 10 20:39:14 gripir input: USB HID v1.10 Device [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 10 20:40:06 gripir input: AT Raw Set 2 keyboard as /class/input/input6 Sep 10 20:40:23 gripir (gripir-2740): Beenden Sep 10 20:40:23 gripir gdm[2644]: System wird neu gestartet... Sep 10 20:40:23 gripir shutdown[2644]: shutting down for system reboot Sep 10 20:40:24 gripir init: Switching to runlevel: 6 Sep 10 20:41:09 gripir Linux version 2.6.17-ARCH (root@Wohnung) (gcc version 4.1.1) #1 SMP PREEMPT Sat Jul 1 10:16:16 CEST 2006 Sep 10 20:41:10 gripir BIOS-provided physical RAM map: Sep 10 20:41:10 gripir BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Sep 10 20:41:10 gripir BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Sep 10 20:41:10 gripir BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Sep 10 20:41:10 gripir BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) Sep 10 20:41:10 gripir BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) Sep 10 20:41:10 gripir BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) Sep 10 20:41:10 gripir BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Sep 10 20:41:10 gripir BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Sep 10 20:41:10 gripir BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Sep 10 20:41:10 gripir 127MB HIGHMEM available. Sep 10 20:41:10 gripir 896MB LOWMEM available. Sep 10 20:41:10 gripir found SMP MP-table at 000f5570 Sep 10 20:41:10 gripir DMI 2.2 present. Sep 10 20:41:10 gripir ACPI: PM-Timer IO Port: 0x1008 Sep 10 20:41:10 gripir ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Sep 10 20:41:10 gripir Processor #0 15:4 APIC version 16 Sep 10 20:41:10 gripir ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Sep 10 20:41:10 gripir ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Sep 10 20:41:10 gripir IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 Sep 10 20:41:10 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Sep 10 20:41:10 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) Sep 10 20:41:10 gripir Enabling APIC mode: Flat. Using 1 I/O APICs Sep 10 20:41:10 gripir Using ACPI (MADT) for SMP configuration information Sep 10 20:41:10 gripir Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Sep 10 20:41:10 gripir Built 1 zonelists Sep 10 20:41:10 gripir Kernel command line: root=/dev/hda3 ro vga=773 Sep 10 20:41:10 gripir Enabling fast FPU save and restore... done. Sep 10 20:41:10 gripir Enabling unmasked SIMD FPU exception support... done. Sep 10 20:41:10 gripir Initializing CPU#0 Sep 10 20:41:10 gripir PID hash table entries: 4096 (order: 12, 16384 bytes) Sep 10 20:41:10 gripir Detected 1999.609 MHz processor. Sep 10 20:41:10 gripir Using pmtmr for high-res timesource Sep 10 20:41:10 gripir Console: colour dummy device 80x25 Sep 10 20:41:10 gripir Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Sep 10 20:41:10 gripir Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Sep 10 20:41:10 gripir Memory: 1034156k/1048512k available (2409k kernel code, 13576k reserved, 715k data, 240k init, 131008k highmem) Sep 10 20:41:10 gripir Checking if this processor honours the WP bit even in supervisor mode... Ok. Sep 10 20:41:10 gripir Calibrating delay using timer specific routine.. 4001.55 BogoMIPS (lpj=8003104) Sep 10 20:41:10 gripir Security Framework v1.0.0 initialized Sep 10 20:41:10 gripir Mount-cache hash table entries: 512 Sep 10 20:41:10 gripir CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Sep 10 20:41:10 gripir CPU: L2 Cache: 512K (64 bytes/line) Sep 10 20:41:10 gripir Intel machine check architecture supported. Sep 10 20:41:10 gripir Intel machine check reporting enabled on CPU#0. Sep 10 20:41:10 gripir Checking 'hlt' instruction... OK. Sep 10 20:41:10 gripir SMP alternatives: switching to UP code Sep 10 20:41:10 gripir Freeing SMP alternatives: 16k freed Sep 10 20:41:10 gripir checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Sep 10 20:41:10 gripir Freeing initrd memory: 840k freed Sep 10 20:41:10 gripir ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. Sep 10 20:41:10 gripir CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 0a Sep 10 20:41:10 gripir Total of 1 processors activated (4001.55 BogoMIPS). Sep 10 20:41:10 gripir ENABLING IO-APIC IRQs Sep 10 20:41:10 gripir ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Sep 10 20:41:10 gripir Brought up 1 CPUs Sep 10 20:41:10 gripir migration_cost=0 Sep 10 20:41:10 gripir NET: Registered protocol family 16 Sep 10 20:41:10 gripir ACPI: bus type pci registered Sep 10 20:41:10 gripir PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=1 Sep 10 20:41:10 gripir Setting up standard PCI resources Sep 10 20:41:10 gripir ACPI: Subsystem revision 20060127 Sep 10 20:41:10 gripir ACPI: Interpreter enabled Sep 10 20:41:10 gripir ACPI: Using IOAPIC for interrupt routing Sep 10 20:41:10 gripir ACPI: PCI Root Bridge [PCI0] (0000:00) Sep 10 20:41:10 gripir ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Sep 10 20:41:10 gripir ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) Sep 10 20:41:10 gripir ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 10 20:41:10 gripir ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. Sep 10 20:41:10 gripir ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 10 20:41:10 gripir ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 10 20:41:10 gripir ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 10 20:41:10 gripir ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Sep 10 20:41:10 gripir ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) Sep 10 20:41:10 gripir Linux Plug and Play Support v0.97 (c) Adam Belay Sep 10 20:41:10 gripir pnp: PnP ACPI init Sep 10 20:41:10 gripir pnp: PnP ACPI: found 11 devices Sep 10 20:41:10 gripir SCSI subsystem initialized Sep 10 20:41:10 gripir PCI: Using ACPI for IRQ routing Sep 10 20:41:10 gripir PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Sep 10 20:41:10 gripir PCI: Bridge: 0000:00:01.0 Sep 10 20:41:10 gripir IO window: disabled. Sep 10 20:41:10 gripir MEM window: e4000000-e5ffffff Sep 10 20:41:10 gripir PREFETCH window: d0000000-dfffffff Sep 10 20:41:10 gripir NET: Registered protocol family 2 Sep 10 20:41:10 gripir IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Sep 10 20:41:10 gripir TCP established hash table entries: 131072 (order: 8, 1572864 bytes) Sep 10 20:41:10 gripir TCP bind hash table entries: 65536 (order: 7, 786432 bytes) Sep 10 20:41:10 gripir TCP: Hash tables configured (established 131072 bind 65536) Sep 10 20:41:10 gripir TCP reno registered Sep 10 20:41:10 gripir apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) Sep 10 20:41:10 gripir apm: overridden by ACPI. Sep 10 20:41:10 gripir highmem bounce pool size: 64 pages Sep 10 20:41:10 gripir VFS: Disk quotas dquot_6.5.1 Sep 10 20:41:10 gripir Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Sep 10 20:41:10 gripir Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Sep 10 20:41:10 gripir Initializing Cryptographic API Sep 10 20:41:10 gripir io scheduler noop registered Sep 10 20:41:10 gripir io scheduler anticipatory registered (default) Sep 10 20:41:10 gripir io scheduler deadline registered Sep 10 20:41:10 gripir io scheduler cfq registered Sep 10 20:41:10 gripir vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 262144k Sep 10 20:41:10 gripir vesafb: mode is 1024x768x8, linelength=1024, pages=3 Sep 10 20:41:10 gripir vesafb: protected mode interface info at c000:e2e0 Sep 10 20:41:10 gripir vesafb: scrolling: redraw Sep 10 20:41:10 gripir vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Sep 10 20:41:10 gripir Console: switching to colour frame buffer device 128x48 Sep 10 20:41:10 gripir fb0: VESA VGA frame buffer device Sep 10 20:41:10 gripir ACPI: Power Button (FF) [PWRF] Sep 10 20:41:10 gripir ACPI: Power Button (CM) [PWRB] Sep 10 20:41:10 gripir ACPI: Sleep Button (CM) [FUTS] Sep 10 20:41:10 gripir ACPI: Fan [FAN] (on) Sep 10 20:41:10 gripir ACPI: Thermal Zone [THRM] (40 C) Sep 10 20:41:10 gripir isapnp: Scanning for PnP cards... Sep 10 20:41:10 gripir isapnp: No Plug & Play device found Sep 10 20:41:10 gripir Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled Sep 10 20:41:10 gripir serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 10 20:41:10 gripir 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 10 20:41:10 gripir Floppy drive(s): fd0 is 1.44M Sep 10 20:41:10 gripir FDC 0 is a post-1991 82077 Sep 10 20:41:10 gripir RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Sep 10 20:41:10 gripir loop: loaded (max 8 devices) Sep 10 20:41:10 gripir PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12 Sep 10 20:41:10 gripir PNP: PS/2 controller doesn't have KBD irq; using default 1 Sep 10 20:41:10 gripir serio: i8042 AUX port at 0x60,0x64 irq 12 Sep 10 20:41:10 gripir serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 10 20:41:10 gripir mice: PS/2 mouse device common for all mice Sep 10 20:41:10 gripir TCP bic registered Sep 10 20:41:10 gripir NET: Registered protocol family 1 Sep 10 20:41:10 gripir NET: Registered protocol family 17 Sep 10 20:41:10 gripir Using IPI No-Shortcut mode Sep 10 20:41:10 gripir ACPI wakeup devices: Sep 10 20:41:10 gripir FUTS PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 PS2M Sep 10 20:41:10 gripir ACPI: (supports S0 S1 S4 S5) Sep 10 20:41:10 gripir RAMDISK: Compressed image found at block 0 Sep 10 20:41:10 gripir input: AT Raw Set 2 keyboard as /class/input/input0 Sep 10 20:41:10 gripir VFS: Mounted root (ext2 filesystem). Sep 10 20:41:10 gripir Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Sep 10 20:41:10 gripir ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Sep 10 20:41:10 gripir SIS5513: IDE controller at PCI slot 0000:00:02.5 Sep 10 20:41:10 gripir SIS5513: chipset revision 1 Sep 10 20:41:10 gripir SIS5513: not 100% native mode: will probe irqs later Sep 10 20:41:10 gripir SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller Sep 10 20:41:10 gripir ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio Sep 10 20:41:10 gripir ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio Sep 10 20:41:10 gripir hda: ST340810A, ATA DISK drive Sep 10 20:41:10 gripir ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Sep 10 20:41:10 gripir hdc: CD-950E/TKU, ATAPI CD/DVD-ROM drive Sep 10 20:41:10 gripir hdd: AOPEN DUW1616/ARR, ATAPI CD/DVD-ROM drive Sep 10 20:41:10 gripir ide1 at 0x170-0x177,0x376 on irq 15 Sep 10 20:41:10 gripir hda: max request size: 128KiB Sep 10 20:41:10 gripir hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) Sep 10 20:41:10 gripir hda: cache flushes not supported Sep 10 20:41:10 gripir hda: hda1 hda2 hda3 Sep 10 20:41:10 gripir ide-floppy driver 0.99.newide Sep 10 20:41:10 gripir sata_sis 0000:00:05.0: version 0.5 Sep 10 20:41:10 gripir ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 10 20:41:10 gripir sata_sis 0000:00:05.0: Detected SiS 180/181 chipset in SATA mode Sep 10 20:41:10 gripir ata1: SATA max UDMA/133 cmd 0xE100 ctl 0xE202 bmdma 0xE500 irq 16 Sep 10 20:41:10 gripir ata2: SATA max UDMA/133 cmd 0xE300 ctl 0xE402 bmdma 0xE508 irq 16 Sep 10 20:41:10 gripir ata1: SATA link up 1.5 Gbps (SStatus 113) Sep 10 20:41:10 gripir ata1: dev 0 ATA-6, max UDMA/100, 321672960 sectors: LBA48 Sep 10 20:41:10 gripir ata1: dev 0 configured for UDMA/100 Sep 10 20:41:10 gripir scsi0 : sata_sis Sep 10 20:41:10 gripir ata2: SATA link down (SStatus 0) Sep 10 20:41:10 gripir scsi1 : sata_sis Sep 10 20:41:10 gripir Vendor: ATA Model: HDS722516VLSA80 Rev: V34O Sep 10 20:41:10 gripir Type: Direct-Access ANSI SCSI revision: 05 Sep 10 20:41:10 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 10 20:41:10 gripir sda: Write Protect is off Sep 10 20:41:10 gripir SCSI device sda: drive cache: write back Sep 10 20:41:10 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 10 20:41:10 gripir sda: Write Protect is off Sep 10 20:41:10 gripir SCSI device sda: drive cache: write back Sep 10 20:41:10 gripir sda: sda1 Sep 10 20:41:10 gripir sd 0:0:0:0: Attached scsi disk sda Sep 10 20:41:10 gripir ReiserFS: hda3: found reiserfs format "3.6" with standard journal Sep 10 20:41:10 gripir ReiserFS: hda3: using ordered data mode Sep 10 20:41:10 gripir ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Sep 10 20:41:10 gripir ReiserFS: hda3: checking transaction log (hda3) Sep 10 20:41:10 gripir ReiserFS: hda3: Using r5 hash to sort names Sep 10 20:41:10 gripir Freeing unused kernel memory: 240k freed Sep 10 20:41:10 gripir usbcore: registered new driver usbfs Sep 10 20:41:10 gripir usbcore: registered new driver hub Sep 10 20:41:10 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 10 20:41:10 gripir ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 10 20:41:10 gripir hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) Sep 10 20:41:10 gripir Uniform CD-ROM driver Revision: 3.20 Sep 10 20:41:10 gripir CSLIP: code copyright 1989 Regents of the University of California Sep 10 20:41:10 gripir PPP generic driver version 2.4.2 Sep 10 20:41:10 gripir parport: PnPBIOS parport detected. Sep 10 20:41:10 gripir parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] Sep 10 20:41:10 gripir Real Time Clock Driver v1.12ac Sep 10 20:41:10 gripir Linux agpgart interface v0.101 (c) Dave Jones Sep 10 20:41:10 gripir hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Sep 10 20:41:10 gripir nvidia: module license 'NVIDIA' taints kernel. Sep 10 20:41:10 gripir ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17 Sep 10 20:41:10 gripir NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774 Tue Aug 1 20:54:08 PDT 2006 Sep 10 20:41:10 gripir input: PC Speaker as /class/input/input1 Sep 10 20:41:10 gripir sis900.c: v1.08.09 Sep. 19 2005 Sep 10 20:41:10 gripir ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 18 Sep 10 20:41:10 gripir 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. Sep 10 20:41:10 gripir 0000:00:04.0: Using transceiver found at address 1 as default Sep 10 20:41:10 gripir eth0: SiS 900 PCI Fast Ethernet at 0xe000, IRQ 18, 00:11:5b:4a:0d:e2. Sep 10 20:41:10 gripir agpgart: Detected AGP bridge 0 Sep 10 20:41:10 gripir agpgart: AGP aperture is 64M @ 0xe0000000 Sep 10 20:41:10 gripir ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 19 Sep 10 20:41:10 gripir ohci_hcd 0000:00:03.0: OHCI Host Controller Sep 10 20:41:10 gripir ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 Sep 10 20:41:10 gripir ohci_hcd 0000:00:03.0: irq 19, io mem 0xe6024000 Sep 10 20:41:10 gripir Linux video capture interface: v1.00 Sep 10 20:41:10 gripir usb usb1: configuration #1 chosen from 1 choice Sep 10 20:41:10 gripir hub 1-0:1.0: USB hub found Sep 10 20:41:10 gripir hub 1-0:1.0: 3 ports detected Sep 10 20:41:10 gripir ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 20 Sep 10 20:41:10 gripir ehci_hcd 0000:00:03.3: EHCI Host Controller Sep 10 20:41:10 gripir ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 2 Sep 10 20:41:10 gripir ehci_hcd 0000:00:03.3: irq 20, io mem 0xe6022000 Sep 10 20:41:10 gripir ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Sep 10 20:41:10 gripir usb usb2: configuration #1 chosen from 1 choice Sep 10 20:41:10 gripir hub 2-0:1.0: USB hub found Sep 10 20:41:10 gripir hub 2-0:1.0: 8 ports detected Sep 10 20:41:10 gripir gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xe800, speed 1217kHz Sep 10 20:41:10 gripir ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21 Sep 10 20:41:10 gripir ohci_hcd 0000:00:03.1: OHCI Host Controller Sep 10 20:41:10 gripir ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 Sep 10 20:41:10 gripir ohci_hcd 0000:00:03.1: irq 21, io mem 0xe6020000 Sep 10 20:41:10 gripir usb usb3: configuration #1 chosen from 1 choice Sep 10 20:41:10 gripir hub 3-0:1.0: USB hub found Sep 10 20:41:10 gripir hub 3-0:1.0: 3 ports detected Sep 10 20:41:10 gripir saa7130/34: v4l2 driver version 0.2.14 loaded Sep 10 20:41:10 gripir ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22 Sep 10 20:41:10 gripir ohci_hcd 0000:00:03.2: OHCI Host Controller Sep 10 20:41:10 gripir ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 Sep 10 20:41:10 gripir ohci_hcd 0000:00:03.2: irq 22, io mem 0xe6021000 Sep 10 20:41:10 gripir lp0: using parport0 (interrupt-driven). Sep 10 20:41:10 gripir usb usb4: configuration #1 chosen from 1 choice Sep 10 20:41:10 gripir hub 4-0:1.0: USB hub found Sep 10 20:41:10 gripir hub 4-0:1.0: 2 ports detected Sep 10 20:41:10 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 10 20:41:10 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 10 20:41:10 gripir ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 18 Sep 10 20:41:10 gripir saa7134[0]: found at 0000:00:0d.0, rev: 1, irq: 18, latency: 32, mmio: 0xe6026000 Sep 10 20:41:10 gripir saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected] Sep 10 20:41:10 gripir saa7134[0]: board init: gpio is 0 Sep 10 20:41:10 gripir pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Sep 10 20:41:10 gripir saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9 Sep 10 20:41:10 gripir saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00 Sep 10 20:41:10 gripir saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 20:41:10 gripir saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 20:41:10 gripir saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 20:41:10 gripir saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 20:41:10 gripir saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 20:41:10 gripir saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 20:41:10 gripir ppdev: user-space parallel port driver Sep 10 20:41:10 gripir saa7134[0] Tuner type is 38 Sep 10 20:41:10 gripir ohci_hcd 0000:00:03.0: wakeup Sep 10 20:41:10 gripir tuner 0-0060: All bytes are equal. It is not a TEA5767 Sep 10 20:41:10 gripir tuner 0-0060: chip found @ 0xc0 (saa7134[0]) Sep 10 20:41:10 gripir tuner 0-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) Sep 10 20:41:10 gripir tda9887 0-0043: chip found @ 0x86 (saa7134[0]) Sep 10 20:41:10 gripir saa7134[0]: registered device video0 [v4l2] Sep 10 20:41:10 gripir saa7134[0]: registered device vbi0 Sep 10 20:41:10 gripir saa7134[0]: registered device radio0 Sep 10 20:41:10 gripir shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Sep 10 20:41:10 gripir usb 3-1: new low speed USB device using ohci_hcd and address 2 Sep 10 20:41:10 gripir usb 3-1: configuration #1 chosen from 1 choice Sep 10 20:41:10 gripir ohci_hcd 0000:00:03.2: wakeup Sep 10 20:41:10 gripir NTFS driver 2.1.27 [Flags: R/W MODULE]. Sep 10 20:41:10 gripir NTFS volume version 3.1. Sep 10 20:41:10 gripir usb 1-1: new low speed USB device using ohci_hcd and address 2 Sep 10 20:41:10 gripir usb 1-1: configuration #1 chosen from 1 choice Sep 10 20:41:10 gripir kjournald starting. Commit interval 5 seconds Sep 10 20:41:10 gripir EXT3 FS on sda1, internal journal Sep 10 20:41:10 gripir EXT3-fs: mounted filesystem with ordered data mode. Sep 10 20:41:10 gripir Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 across:498004k Sep 10 20:41:10 gripir usb 4-1: new full speed USB device using ohci_hcd and address 2 Sep 10 20:41:10 gripir usb 4-1: configuration #1 chosen from 1 choice Sep 10 20:41:10 gripir usbcore: registered new driver hiddev Sep 10 20:41:10 gripir input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 Sep 10 20:41:10 gripir input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.1-1 Sep 10 20:41:10 gripir input: Microsoft® Office Keyboard as /class/input/input3 Sep 10 20:41:10 gripir input: USB HID v1.10 Keyboard [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 10 20:41:10 gripir input: Microsoft® Office Keyboard as /class/input/input4 Sep 10 20:41:10 gripir input: USB HID v1.10 Device [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 10 20:41:10 gripir usbcore: registered new driver usbhid Sep 10 20:41:10 gripir drivers/usb/input/hid-core.c: v2.6:USB HID core driver Sep 10 20:41:10 gripir prism2usb_init: prism2_usb.o: 0.2.3 Loaded Sep 10 20:41:10 gripir prism2usb_init: dev_info is: prism2_usb Sep 10 20:41:10 gripir usb 4-1: reset full speed USB device using ohci_hcd and address 2 Sep 10 20:41:10 gripir usbcore: registered new driver prism2_usb Sep 10 20:41:10 gripir ident: nic h/w: id=0x8026 1.0.0 Sep 10 20:41:10 gripir ident: pri f/w: id=0x15 1.1.3 Sep 10 20:41:10 gripir ident: sta f/w: id=0x1f 1.7.1 Sep 10 20:41:10 gripir MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1 Sep 10 20:41:10 gripir CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1 Sep 10 20:41:10 gripir PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/4 Sep 10 20:41:10 gripir STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/12 Sep 10 20:41:10 gripir PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 10 20:41:10 gripir STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 10 20:41:10 gripir STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1 Sep 10 20:41:10 gripir Prism2 card SN: 000000000000 Sep 10 20:41:11 gripir linkstatus=CONNECTED Sep 10 20:41:19 gripir NVRM: not using NVAGP, an AGPGART backend is loaded! Sep 10 20:41:32 gripir (gripir-2728): (Version 2.14.0) wird gestartet, Prozesskennung 2728, Benutzer »gripir« Sep 10 20:41:33 gripir (gripir-2728): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 10 20:41:33 gripir (gripir-2728): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 10 20:41:33 gripir (gripir-2728): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 10 20:41:40 gripir (gripir-2728): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 0 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 10 20:41:46 gripir NET: Registered protocol family 10 Sep 10 20:41:46 gripir lo: Disabled Privacy Extensions Sep 10 20:41:46 gripir IPv6 over IPv4 tunneling driver Sep 10 20:42:54 gripir (gripir-2728): Beenden Sep 10 20:42:54 gripir gdm[2629]: Master wird angehalten... Sep 10 20:42:55 gripir shutdown[2629]: shutting down for system halt Sep 10 20:42:55 gripir init: Switching to runlevel: 0 Sep 10 21:01:28 gripir Linux version 2.6.17-ARCH (root@Wohnung) (gcc version 4.1.1) #1 SMP PREEMPT Sat Jul 1 10:16:16 CEST 2006 Sep 10 21:01:28 gripir BIOS-provided physical RAM map: Sep 10 21:01:28 gripir BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Sep 10 21:01:28 gripir BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Sep 10 21:01:28 gripir BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Sep 10 21:01:28 gripir BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) Sep 10 21:01:28 gripir BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) Sep 10 21:01:28 gripir BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) Sep 10 21:01:28 gripir BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Sep 10 21:01:28 gripir BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Sep 10 21:01:28 gripir BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Sep 10 21:01:28 gripir 127MB HIGHMEM available. Sep 10 21:01:28 gripir 896MB LOWMEM available. Sep 10 21:01:28 gripir found SMP MP-table at 000f5570 Sep 10 21:01:28 gripir DMI 2.2 present. Sep 10 21:01:28 gripir ACPI: PM-Timer IO Port: 0x1008 Sep 10 21:01:28 gripir ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Sep 10 21:01:28 gripir Processor #0 15:4 APIC version 16 Sep 10 21:01:28 gripir ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Sep 10 21:01:28 gripir ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Sep 10 21:01:28 gripir IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 Sep 10 21:01:28 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Sep 10 21:01:28 gripir ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) Sep 10 21:01:28 gripir Enabling APIC mode: Flat. Using 1 I/O APICs Sep 10 21:01:28 gripir Using ACPI (MADT) for SMP configuration information Sep 10 21:01:28 gripir Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Sep 10 21:01:28 gripir Built 1 zonelists Sep 10 21:01:28 gripir Kernel command line: root=/dev/hda3 ro vga=773 Sep 10 21:01:28 gripir Enabling fast FPU save and restore... done. Sep 10 21:01:28 gripir Enabling unmasked SIMD FPU exception support... done. Sep 10 21:01:28 gripir Initializing CPU#0 Sep 10 21:01:28 gripir PID hash table entries: 4096 (order: 12, 16384 bytes) Sep 10 21:01:28 gripir Detected 1999.794 MHz processor. Sep 10 21:01:28 gripir Using pmtmr for high-res timesource Sep 10 21:01:28 gripir Console: colour dummy device 80x25 Sep 10 21:01:28 gripir Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Sep 10 21:01:28 gripir Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Sep 10 21:01:28 gripir Memory: 1034156k/1048512k available (2409k kernel code, 13576k reserved, 715k data, 240k init, 131008k highmem) Sep 10 21:01:28 gripir Checking if this processor honours the WP bit even in supervisor mode... Ok. Sep 10 21:01:28 gripir Calibrating delay using timer specific routine.. 4001.52 BogoMIPS (lpj=8003041) Sep 10 21:01:28 gripir Security Framework v1.0.0 initialized Sep 10 21:01:28 gripir Mount-cache hash table entries: 512 Sep 10 21:01:28 gripir CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Sep 10 21:01:28 gripir CPU: L2 Cache: 512K (64 bytes/line) Sep 10 21:01:28 gripir Intel machine check architecture supported. Sep 10 21:01:28 gripir Intel machine check reporting enabled on CPU#0. Sep 10 21:01:28 gripir Checking 'hlt' instruction... OK. Sep 10 21:01:28 gripir SMP alternatives: switching to UP code Sep 10 21:01:28 gripir Freeing SMP alternatives: 16k freed Sep 10 21:01:28 gripir checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Sep 10 21:01:28 gripir Freeing initrd memory: 840k freed Sep 10 21:01:28 gripir ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. Sep 10 21:01:28 gripir CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 0a Sep 10 21:01:28 gripir Total of 1 processors activated (4001.52 BogoMIPS). Sep 10 21:01:28 gripir ENABLING IO-APIC IRQs Sep 10 21:01:28 gripir ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Sep 10 21:01:28 gripir Brought up 1 CPUs Sep 10 21:01:28 gripir migration_cost=0 Sep 10 21:01:28 gripir NET: Registered protocol family 16 Sep 10 21:01:28 gripir ACPI: bus type pci registered Sep 10 21:01:28 gripir PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=1 Sep 10 21:01:28 gripir Setting up standard PCI resources Sep 10 21:01:28 gripir ACPI: Subsystem revision 20060127 Sep 10 21:01:28 gripir ACPI: Interpreter enabled Sep 10 21:01:28 gripir ACPI: Using IOAPIC for interrupt routing Sep 10 21:01:28 gripir ACPI: PCI Root Bridge [PCI0] (0000:00) Sep 10 21:01:28 gripir ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Sep 10 21:01:28 gripir ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) Sep 10 21:01:28 gripir ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 10 21:01:28 gripir ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. Sep 10 21:01:28 gripir ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 10 21:01:28 gripir ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Sep 10 21:01:28 gripir ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Sep 10 21:01:28 gripir ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Sep 10 21:01:28 gripir ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) Sep 10 21:01:28 gripir Linux Plug and Play Support v0.97 (c) Adam Belay Sep 10 21:01:28 gripir pnp: PnP ACPI init Sep 10 21:01:28 gripir pnp: PnP ACPI: found 10 devices Sep 10 21:01:28 gripir SCSI subsystem initialized Sep 10 21:01:28 gripir PCI: Using ACPI for IRQ routing Sep 10 21:01:28 gripir PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Sep 10 21:01:28 gripir PCI: Bridge: 0000:00:01.0 Sep 10 21:01:28 gripir IO window: disabled. Sep 10 21:01:28 gripir MEM window: e4000000-e5ffffff Sep 10 21:01:28 gripir PREFETCH window: d0000000-dfffffff Sep 10 21:01:28 gripir NET: Registered protocol family 2 Sep 10 21:01:28 gripir IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Sep 10 21:01:28 gripir TCP established hash table entries: 131072 (order: 8, 1572864 bytes) Sep 10 21:01:28 gripir TCP bind hash table entries: 65536 (order: 7, 786432 bytes) Sep 10 21:01:28 gripir TCP: Hash tables configured (established 131072 bind 65536) Sep 10 21:01:28 gripir TCP reno registered Sep 10 21:01:28 gripir apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) Sep 10 21:01:28 gripir apm: overridden by ACPI. Sep 10 21:01:28 gripir highmem bounce pool size: 64 pages Sep 10 21:01:28 gripir VFS: Disk quotas dquot_6.5.1 Sep 10 21:01:28 gripir Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Sep 10 21:01:28 gripir Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Sep 10 21:01:28 gripir Initializing Cryptographic API Sep 10 21:01:28 gripir io scheduler noop registered Sep 10 21:01:28 gripir io scheduler anticipatory registered (default) Sep 10 21:01:28 gripir io scheduler deadline registered Sep 10 21:01:28 gripir io scheduler cfq registered Sep 10 21:01:28 gripir vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 262144k Sep 10 21:01:28 gripir vesafb: mode is 1024x768x8, linelength=1024, pages=3 Sep 10 21:01:28 gripir vesafb: protected mode interface info at c000:e2e0 Sep 10 21:01:28 gripir vesafb: scrolling: redraw Sep 10 21:01:28 gripir vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Sep 10 21:01:28 gripir Console: switching to colour frame buffer device 128x48 Sep 10 21:01:28 gripir fb0: VESA VGA frame buffer device Sep 10 21:01:28 gripir ACPI: Power Button (FF) [PWRF] Sep 10 21:01:28 gripir ACPI: Power Button (CM) [PWRB] Sep 10 21:01:28 gripir ACPI: Sleep Button (CM) [FUTS] Sep 10 21:01:28 gripir ACPI: Fan [FAN] (on) Sep 10 21:01:28 gripir ACPI: Thermal Zone [THRM] (40 C) Sep 10 21:01:28 gripir isapnp: Scanning for PnP cards... Sep 10 21:01:28 gripir isapnp: No Plug & Play device found Sep 10 21:01:28 gripir Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled Sep 10 21:01:28 gripir serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 10 21:01:28 gripir 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 10 21:01:28 gripir Floppy drive(s): fd0 is 1.44M Sep 10 21:01:28 gripir FDC 0 is a post-1991 82077 Sep 10 21:01:28 gripir RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Sep 10 21:01:28 gripir loop: loaded (max 8 devices) Sep 10 21:01:28 gripir PNP: No PS/2 controller found. Probing ports directly. Sep 10 21:01:28 gripir serio: i8042 AUX port at 0x60,0x64 irq 12 Sep 10 21:01:28 gripir serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 10 21:01:28 gripir mice: PS/2 mouse device common for all mice Sep 10 21:01:28 gripir TCP bic registered Sep 10 21:01:28 gripir NET: Registered protocol family 1 Sep 10 21:01:28 gripir NET: Registered protocol family 17 Sep 10 21:01:28 gripir Using IPI No-Shortcut mode Sep 10 21:01:28 gripir ACPI wakeup devices: Sep 10 21:01:28 gripir FUTS PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 Sep 10 21:01:28 gripir ACPI: (supports S0 S1 S4 S5) Sep 10 21:01:28 gripir RAMDISK: Compressed image found at block 0 Sep 10 21:01:28 gripir VFS: Mounted root (ext2 filesystem). Sep 10 21:01:28 gripir Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Sep 10 21:01:28 gripir ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Sep 10 21:01:28 gripir SIS5513: IDE controller at PCI slot 0000:00:02.5 Sep 10 21:01:28 gripir SIS5513: chipset revision 1 Sep 10 21:01:28 gripir SIS5513: not 100% native mode: will probe irqs later Sep 10 21:01:28 gripir SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller Sep 10 21:01:28 gripir ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio Sep 10 21:01:28 gripir ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio Sep 10 21:01:28 gripir hda: ST340810A, ATA DISK drive Sep 10 21:01:28 gripir ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Sep 10 21:01:28 gripir hdc: CD-950E/TKU, ATAPI CD/DVD-ROM drive Sep 10 21:01:28 gripir hdd: AOPEN DUW1616/ARR, ATAPI CD/DVD-ROM drive Sep 10 21:01:28 gripir ide1 at 0x170-0x177,0x376 on irq 15 Sep 10 21:01:28 gripir hda: max request size: 128KiB Sep 10 21:01:28 gripir hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) Sep 10 21:01:28 gripir hda: cache flushes not supported Sep 10 21:01:28 gripir hda: hda1 hda2 hda3 Sep 10 21:01:28 gripir ide-floppy driver 0.99.newide Sep 10 21:01:28 gripir sata_sis 0000:00:05.0: version 0.5 Sep 10 21:01:28 gripir ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 10 21:01:28 gripir sata_sis 0000:00:05.0: Detected SiS 180/181 chipset in SATA mode Sep 10 21:01:28 gripir ata1: SATA max UDMA/133 cmd 0xE100 ctl 0xE202 bmdma 0xE500 irq 16 Sep 10 21:01:28 gripir ata2: SATA max UDMA/133 cmd 0xE300 ctl 0xE402 bmdma 0xE508 irq 16 Sep 10 21:01:28 gripir ata1: SATA link up 1.5 Gbps (SStatus 113) Sep 10 21:01:28 gripir ata1: dev 0 ATA-6, max UDMA/100, 321672960 sectors: LBA48 Sep 10 21:01:28 gripir ata1: dev 0 configured for UDMA/100 Sep 10 21:01:28 gripir scsi0 : sata_sis Sep 10 21:01:28 gripir ata2: SATA link down (SStatus 0) Sep 10 21:01:28 gripir scsi1 : sata_sis Sep 10 21:01:28 gripir Vendor: ATA Model: HDS722516VLSA80 Rev: V34O Sep 10 21:01:28 gripir Type: Direct-Access ANSI SCSI revision: 05 Sep 10 21:01:28 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 10 21:01:28 gripir sda: Write Protect is off Sep 10 21:01:28 gripir SCSI device sda: drive cache: write back Sep 10 21:01:28 gripir SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Sep 10 21:01:28 gripir sda: Write Protect is off Sep 10 21:01:28 gripir SCSI device sda: drive cache: write back Sep 10 21:01:28 gripir sda: sda1 Sep 10 21:01:28 gripir sd 0:0:0:0: Attached scsi disk sda Sep 10 21:01:28 gripir ReiserFS: hda3: found reiserfs format "3.6" with standard journal Sep 10 21:01:28 gripir ReiserFS: hda3: using ordered data mode Sep 10 21:01:28 gripir ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Sep 10 21:01:28 gripir ReiserFS: hda3: checking transaction log (hda3) Sep 10 21:01:28 gripir ReiserFS: hda3: Using r5 hash to sort names Sep 10 21:01:28 gripir Freeing unused kernel memory: 240k freed Sep 10 21:01:28 gripir usbcore: registered new driver usbfs Sep 10 21:01:28 gripir usbcore: registered new driver hub Sep 10 21:01:28 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 10 21:01:28 gripir ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 16 Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 10 21:01:28 gripir hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) Sep 10 21:01:28 gripir Uniform CD-ROM driver Revision: 3.20 Sep 10 21:01:28 gripir input: PC Speaker as /class/input/input0 Sep 10 21:01:28 gripir hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Sep 10 21:01:28 gripir CSLIP: code copyright 1989 Regents of the University of California Sep 10 21:01:28 gripir PPP generic driver version 2.4.2 Sep 10 21:01:28 gripir parport: PnPBIOS parport detected. Sep 10 21:01:28 gripir parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] Sep 10 21:01:28 gripir Real Time Clock Driver v1.12ac Sep 10 21:01:28 gripir Linux agpgart interface v0.101 (c) Dave Jones Sep 10 21:01:28 gripir nvidia: module license 'NVIDIA' taints kernel. Sep 10 21:01:28 gripir ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17 Sep 10 21:01:28 gripir NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774 Tue Aug 1 20:54:08 PDT 2006 Sep 10 21:01:28 gripir Linux video capture interface: v1.00 Sep 10 21:01:28 gripir saa7130/34: v4l2 driver version 0.2.14 loaded Sep 10 21:01:28 gripir ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 18 Sep 10 21:01:28 gripir saa7134[0]: found at 0000:00:0d.0, rev: 1, irq: 18, latency: 32, mmio: 0xe6026000 Sep 10 21:01:28 gripir saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected] Sep 10 21:01:28 gripir saa7134[0]: board init: gpio is 0 Sep 10 21:01:28 gripir sis900.c: v1.08.09 Sep. 19 2005 Sep 10 21:01:28 gripir saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9 Sep 10 21:01:28 gripir saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00 Sep 10 21:01:28 gripir saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 21:01:28 gripir saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 21:01:28 gripir saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 21:01:28 gripir saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 21:01:28 gripir saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 21:01:28 gripir saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 21:01:28 gripir lp0: using parport0 (interrupt-driven). Sep 10 21:01:28 gripir saa7134[0] Tuner type is 38 Sep 10 21:01:28 gripir tuner 0-0060: All bytes are equal. It is not a TEA5767 Sep 10 21:01:28 gripir tuner 0-0060: chip found @ 0xc0 (saa7134[0]) Sep 10 21:01:28 gripir tuner 0-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) Sep 10 21:01:28 gripir ppdev: user-space parallel port driver Sep 10 21:01:28 gripir snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_midi_event_free Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_midi_event_no_status Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_use_lock_sync_helper Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_seq_event_port_detach Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_midi_event_new Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_midi_event_decode Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_seq_create_kernel_client Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_midi_event_encode_byte Sep 10 21:01:28 gripir snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl Sep 10 21:01:28 gripir tda9887 0-0043: chip found @ 0x86 (saa7134[0]) Sep 10 21:01:28 gripir saa7134[0]: registered device video0 [v4l2] Sep 10 21:01:28 gripir saa7134[0]: registered device vbi0 Sep 10 21:01:28 gripir saa7134[0]: registered device radio0 Sep 10 21:01:28 gripir ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 18 Sep 10 21:01:28 gripir 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. Sep 10 21:01:28 gripir 0000:00:04.0: Using transceiver found at address 1 as default Sep 10 21:01:28 gripir eth0: SiS 900 PCI Fast Ethernet at 0xe000, IRQ 18, 00:11:5b:4a:0d:e2. Sep 10 21:01:28 gripir ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 19 Sep 10 21:01:28 gripir ohci_hcd 0000:00:03.0: OHCI Host Controller Sep 10 21:01:28 gripir ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 Sep 10 21:01:28 gripir ohci_hcd 0000:00:03.0: irq 19, io mem 0xe6024000 Sep 10 21:01:28 gripir pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Sep 10 21:01:28 gripir usb usb1: configuration #1 chosen from 1 choice Sep 10 21:01:28 gripir hub 1-0:1.0: USB hub found Sep 10 21:01:28 gripir hub 1-0:1.0: 3 ports detected Sep 10 21:01:28 gripir ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 20 Sep 10 21:01:28 gripir ehci_hcd 0000:00:03.3: EHCI Host Controller Sep 10 21:01:28 gripir ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 2 Sep 10 21:01:28 gripir ehci_hcd 0000:00:03.3: irq 20, io mem 0xe6022000 Sep 10 21:01:28 gripir ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Sep 10 21:01:28 gripir usb usb2: configuration #1 chosen from 1 choice Sep 10 21:01:28 gripir hub 2-0:1.0: USB hub found Sep 10 21:01:28 gripir hub 2-0:1.0: 8 ports detected Sep 10 21:01:28 gripir agpgart: Detected AGP bridge 0 Sep 10 21:01:28 gripir agpgart: AGP aperture is 64M @ 0xe0000000 Sep 10 21:01:28 gripir gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xe800, speed 1242kHz Sep 10 21:01:28 gripir ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21 Sep 10 21:01:28 gripir ohci_hcd 0000:00:03.1: OHCI Host Controller Sep 10 21:01:28 gripir ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 Sep 10 21:01:28 gripir ohci_hcd 0000:00:03.1: irq 21, io mem 0xe6020000 Sep 10 21:01:28 gripir usb usb3: configuration #1 chosen from 1 choice Sep 10 21:01:28 gripir hub 3-0:1.0: USB hub found Sep 10 21:01:28 gripir hub 3-0:1.0: 3 ports detected Sep 10 21:01:28 gripir ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22 Sep 10 21:01:28 gripir ohci_hcd 0000:00:03.2: OHCI Host Controller Sep 10 21:01:28 gripir ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 Sep 10 21:01:28 gripir ohci_hcd 0000:00:03.2: irq 22, io mem 0xe6021000 Sep 10 21:01:28 gripir usb usb4: configuration #1 chosen from 1 choice Sep 10 21:01:28 gripir hub 4-0:1.0: USB hub found Sep 10 21:01:28 gripir hub 4-0:1.0: 2 ports detected Sep 10 21:01:28 gripir shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Sep 10 21:01:28 gripir ohci_hcd 0000:00:03.0: wakeup Sep 10 21:01:28 gripir usb 3-1: new low speed USB device using ohci_hcd and address 2 Sep 10 21:01:28 gripir usb 3-1: configuration #1 chosen from 1 choice Sep 10 21:01:28 gripir ohci_hcd 0000:00:03.2: wakeup Sep 10 21:01:28 gripir usb 1-1: new low speed USB device using ohci_hcd and address 2 Sep 10 21:01:28 gripir usb 1-1: configuration #1 chosen from 1 choice Sep 10 21:01:28 gripir usb 4-1: new full speed USB device using ohci_hcd and address 2 Sep 10 21:01:28 gripir usb 4-1: configuration #1 chosen from 1 choice Sep 10 21:01:28 gripir usbcore: registered new driver hiddev Sep 10 21:01:28 gripir input: Logitech USB-PS/2 Optical Mouse as /class/input/input1 Sep 10 21:01:28 gripir input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.1-1 Sep 10 21:01:28 gripir input: Microsoft® Office Keyboard as /class/input/input2 Sep 10 21:01:28 gripir input: USB HID v1.10 Keyboard [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 10 21:01:28 gripir input: Microsoft® Office Keyboard as /class/input/input3 Sep 10 21:01:28 gripir input: USB HID v1.10 Device [Microsoft® Office Keyboard] on usb-0000:00:03.0-1 Sep 10 21:01:28 gripir usbcore: registered new driver usbhid Sep 10 21:01:28 gripir drivers/usb/input/hid-core.c: v2.6:USB HID core driver Sep 10 21:01:28 gripir prism2usb_init: prism2_usb.o: 0.2.3 Loaded Sep 10 21:01:28 gripir prism2usb_init: dev_info is: prism2_usb Sep 10 21:01:28 gripir usb 4-1: reset full speed USB device using ohci_hcd and address 2 Sep 10 21:01:28 gripir usbcore: registered new driver prism2_usb Sep 10 21:01:28 gripir NTFS driver 2.1.27 [Flags: R/W MODULE]. Sep 10 21:01:28 gripir NTFS volume version 3.1. Sep 10 21:01:28 gripir kjournald starting. Commit interval 5 seconds Sep 10 21:01:28 gripir EXT3 FS on sda1, internal journal Sep 10 21:01:28 gripir EXT3-fs: mounted filesystem with ordered data mode. Sep 10 21:01:28 gripir Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 across:498004k Sep 10 21:01:29 gripir ident: nic h/w: id=0x8026 1.0.0 Sep 10 21:01:29 gripir ident: pri f/w: id=0x15 1.1.3 Sep 10 21:01:29 gripir ident: sta f/w: id=0x1f 1.7.1 Sep 10 21:01:29 gripir MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1 Sep 10 21:01:29 gripir CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1 Sep 10 21:01:29 gripir PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/4 Sep 10 21:01:29 gripir STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/12 Sep 10 21:01:29 gripir PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 10 21:01:29 gripir STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 Sep 10 21:01:29 gripir STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1 Sep 10 21:01:29 gripir Prism2 card SN: 000000000000 Sep 10 21:01:30 gripir linkstatus=CONNECTED Sep 10 21:01:39 gripir NVRM: not using NVAGP, an AGPGART backend is loaded! Sep 10 21:01:53 gripir (gripir-2739): (Version 2.14.0) wird gestartet, Prozesskennung 2739, Benutzer »gripir« Sep 10 21:01:54 gripir (gripir-2739): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 10 21:01:54 gripir (gripir-2739): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 10 21:01:54 gripir (gripir-2739): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 10 21:02:02 gripir (gripir-2739): Die Adresse »xml:readwrite:/home/gripir/.gconf« wurde an der Position 0 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 10 21:02:09 gripir NET: Registered protocol family 10 Sep 10 21:02:09 gripir lo: Disabled Privacy Extensions Sep 10 21:02:09 gripir IPv6 over IPv4 tunneling driver Sep 10 21:04:16 gripir usb 1-2: new full speed USB device using ohci_hcd and address 3 Sep 10 21:04:16 gripir usb 1-2: configuration #1 chosen from 1 choice Sep 10 21:04:16 gripir Initializing USB Mass Storage driver... Sep 10 21:04:16 gripir scsi2 : SCSI emulation for USB Mass Storage devices Sep 10 21:04:16 gripir usbcore: registered new driver usb-storage Sep 10 21:04:16 gripir USB Mass Storage support registered. Sep 10 21:04:21 gripir Vendor: OLYMPUS Model: FE130/X720 Rev: 1.00 Sep 10 21:04:21 gripir Type: Direct-Access ANSI SCSI revision: 02 Sep 10 21:04:21 gripir SCSI device sdb: 1023120 512-byte hdwr sectors (524 MB) Sep 10 21:04:21 gripir sdb: Write Protect is off Sep 10 21:04:21 gripir SCSI device sdb: 1023120 512-byte hdwr sectors (524 MB) Sep 10 21:04:21 gripir sdb: Write Protect is off Sep 10 21:04:21 gripir sdb: sdb1 Sep 10 21:04:21 gripir sd 2:0:0:0: Attached scsi removable disk sdb Sep 10 21:10:16 gripir (root-3027): (Version 2.14.0) wird gestartet, Prozesskennung 3027, Benutzer »root« Sep 10 21:10:16 gripir (root-3027): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Sep 10 21:10:16 gripir (root-3027): Die Adresse »xml:readwrite:/root/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Sep 10 21:10:16 gripir (root-3027): Die Adresse »xml:readonly:/opt/gnome/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst