Linux version 2.6.17-suspend2 (root@myhost) (gcc version 4.1.1) #1 SMP PREEMPT Wed Sep 13 13:03:23 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000000ffdb000 (usable) BIOS-e820: 000000000ffdb000 - 0000000010000000 (reserved) BIOS-e820: 00000000100a0000 - 0000000010100000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 255MB LOWMEM available. On node 0 totalpages: 65499 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 61403 pages, LIFO batch:15 DMI 2.3 present. ACPI: RSDP (v000 DELL ) @ 0x000f4040 ACPI: RSDT (v001 DELL CPi R 0x27d2051c ASL 0x00000061) @ 0x0fff0000 ACPI: FADT (v001 DELL CPi R 0x27d2051c ASL 0x00000061) @ 0x0fff0400 ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 Allocating PCI resources starting at 20000000 (gap: 10100000:efd00000) Built 1 zonelists Kernel command line: root=/dev/mapper/gollum-root resume2=file:/dev/mapper/root:0xc1008 ro vga=0x318 Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (0120a000) Enabling fast FPU save and restore... done. Initializing CPU#0 PID hash table entries: 1024 (order: 10, 4096 bytes) Detected 463.413 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 253800k/261996k available (2284k kernel code, 7624k reserved, 724k data, 232k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 927.28 BogoMIPS (lpj=463641) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed checking if image is initramfs... it is Freeing initrd memory: 1718k freed ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. ACPI: setting ELCR to 0200 (from 0820) CPU0: Intel Celeron (Mendocino) stepping 0a SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs migration_cost=0 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfc0ae, last bus=1 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI quirk: region 0800-083f claimed by PIIX4 ACPI PCI quirk: region 0840-084f claimed by PIIX4 SMB PIIX4 devres B PIO at 00e0-00e7 PIIX4 devres C PIO at 0850-085f Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: Power Resource [PADA] (on) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:02: ioport range 0x800-0x805 could not be reserved pnp: 00:02: ioport range 0x808-0x80f could not be reserved pnp: 00:03: ioport range 0x806-0x807 has been reserved pnp: 00:03: ioport range 0x850-0x853 has been reserved pnp: 00:03: ioport range 0x856-0x85f has been reserved pnp: 00:03: ioport range 0x810-0x83f has been reserved pnp: 00:03: ioport range 0x840-0x84f has been reserved pnp: 00:03: ioport range 0x600-0x67f has been reserved pnp: 00:03: ioport range 0x680-0x6ff has been reserved pnp: 00:04: ioport range 0xf000-0xf0fe has been reserved pnp: 00:04: ioport range 0xf100-0xf1fe has been reserved pnp: 00:04: ioport range 0xf200-0xf2fe has been reserved pnp: 00:04: ioport range 0xf400-0xf4fe has been reserved pnp: 00:04: ioport range 0xf500-0xf5fe has been reserved pnp: 00:04: ioport range 0xf600-0xf6fe has been reserved pnp: 00:04: ioport range 0xf800-0xf8fe has been reserved pnp: 00:04: ioport range 0xf900-0xf9fe has been reserved pnp: 00:09: ioport range 0x3f0-0x3f1 has been reserved PCI: Bridge: 0000:00:01.0 IO window: e000-efff MEM window: fc000000-feffffff PREFETCH window: 28000000-280fffff PCI: Bus 2, cardbus bridge: 0000:00:03.0 IO window: 00001000-000010ff IO window: 00001400-000014ff PREFETCH window: 20000000-21ffffff MEM window: 22000000-23ffffff PCI: Bus 6, cardbus bridge: 0000:00:03.1 IO window: 00001800-000018ff IO window: 00001c00-00001cff PREFETCH window: 24000000-25ffffff MEM window: 26000000-27ffffff PCI: Enabling device 0000:00:03.0 (0000 -> 0003) ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Enabling device 0000:00:03.1 (0000 -> 0003) ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 98304 bytes) TCP bind hash table entries: 4096 (order: 3, 49152 bytes) TCP: Hash tables configured (established 8192 bind 4096) TCP reno registered apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Limiting direct PCI/PCI transfers. vesafb: framebuffer at 0xfd000000, mapped to 0xd0880000, using 4608k, total 8128k vesafb: mode is 1024x768x24, linelength=3072, pages=2 vesafb: protected mode interface info at c000:5044 vesafb: scrolling: redraw vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery absent) ACPI: Lid Switch [LID] ACPI: Power Button (CM) [PBTN] ACPI: Sleep Button (CM) [SBTN] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Thermal Zone [THM] (55 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Suspend2 Core. Suspend2 Compression Driver loading. Suspend2 Encryption Driver loading. Suspend2 Swap Writer loading. Suspend2 FileWriter loading. input: AT Translated Set 2 keyboard as /class/input/input0 ACPI wakeup devices: LID PBTN PCI0 UAR1 MPCI ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 232k freed input: DualPoint Stick as /class/input/input1 input: AlpsPS/2 ALPS DualPoint TouchPad as /class/input/input2 usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dce0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 0000:00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x0860-0x0867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x0868-0x086f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... usb 1-1: new full speed USB device using uhci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected hda: FUJITSU MHV2080AT, ATA DISK drive usb 1-1.3: new low speed USB device using uhci_hcd and address 3 usb 1-1.3: configuration #1 chosen from 1 choice usb 1-1.4: new low speed USB device using uhci_hcd and address 4 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... usb 1-1.4: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: HID 062a:0001 as /class/input/input3 input: USB HID v1.10 Mouse [HID 062a:0001] on usb-0000:00:07.2-1.3 input: IBM IBM Standard USB Keyboard as /class/input/input4 input: USB HID v1.00 Keyboard [IBM IBM Standard USB Keyboard] on usb-0000:00:07.2-1.4 input: IBM IBM Standard USB Keyboard as /class/input/input5 input: USB HID v1.00 Mouse [IBM IBM Standard USB Keyboard] on usb-0000:00:07.2-1.4 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver hda: max request size: 128KiB hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33) hda: cache flushes supported hda: hda1 hda2 device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com Suspend2 2.2.7.5: Can't translate "file" into a device id yet. Suspend2 Filewriter: Testing whether you can resume: Suspend2 2.2.7.5: Filewriter: File signature found. Resuming enabled. Suspend2 2.2.7.5: Resuming enabled. Suspend2 2.2.7.5: No image found. Suspend2 2.2.7.5: Read image returned -61. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. fuse init (API version 7.6) tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Coda Kernel/Venus communications, v6.0.0, coda@cs.cmu.edu Non-volatile memory driver v1.2 Real Time Clock Driver v1.12ac piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 440BX Chipset. agpgart: AGP aperture is 64M @ 0xf4000000 ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:00:03.0 [1028:00aa] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:03.0, mfunc 0x01261222, devctl 0x66 input: PC Speaker as /class/input/input6 Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000006 ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:00:03.1 [1028:00aa] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:03.1, mfunc 0x01261222, devctl 0x66 Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000020 CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 pccard: CardBus card inserted into slot 1 es1968: clocking to 48000 Linux video capture interface: v1.00 cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x370-0x377 cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x370-0x377 cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 PCI: Enabling device 0000:06:00.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 rt2500 1.1.0 CVS CVS http://rt2x00.serialmonkey.com PCI: Setting latency timer of device 0000:06:00.0 to 64 rt2500 EEPROM: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Channel rt2500 EEPROM: 1 1 1 1 1 1 1 1 1 1 1 1 1 1 dBm Maximum ts: Compaq touchscreen protocol output EXT3 FS on dm-3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-4, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 261620k swap on /dev/mapper/swap. Priority:-1 extents:1 across:261620k NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.1 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.7 Suspend2 2.2.7.5: Filewriter: Testing whether you can suspend: Suspend2 2.2.7.5: Filewriter: File signature found. Suspend2 2.2.7.5: Can't translate "file" into a device id yet. Suspend2 2.2.7.5: Resuming enabled. Suspend2 2.2.7.5: Suspending enabled. pccard: card ejected from slot 1 Suspend2 2.2.7.5: Initiating a software suspend cycle. Freezing cpus ... Free:32190(32190). Sets:6172(6172),27053(27053). Header:4. Nosave:2-0=2. Storage:0/16866(65536). Needed:-27808|-48670|0. Free:32190(32190). Sets:6172(6172),27053(27053). Header:4. Nosave:2-0=2. Storage:0/16866(65536). Needed:-27808|-48670|0. Free:32206(32206). Sets:6155(6155),27053(27053). Header:4. Nosave:2-0=2. Storage:65536/16858(65536). Needed:-27824|-48678|0. 20%...40%...60%...80%...100%...done. pnp: Device 00:0d disabled. Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. EXT3-fs error (device dm-3): ext3_readdir: bad entry in directory #629262: rec_len is smaller than minimal - offset=0, inode=0, rec_len=0, name_len=0 Aborting journal on device dm-3. ------------[ cut here ]------------ kernel BUG at block/ll_rw_blk.c:3128! invalid opcode: 0000 [#1] PREEMPT SMP Modules linked in: ext2 rfcomm hidp l2cap bluetooth snd_seq_oss snd_seq_midi_event snd_seq tsdev snd_pcm_oss snd_mixer_oss shpchp pci_hotplug pcmcia radio_maestro compat_ioctl32 videodev snd_es1968 gameport snd_ac97_codec snd_ac97_bus joydev ppp_generic slhc snd_pcm snd_timer snd_page_alloc evdev snd_mpu401_uart snd_rawmidi pcspkr yenta_socket rsrc_nonstatic pcmcia_core snd_seq_device intel_agp agpgart i2c_piix4 i2c_core snd soundcore rtc nvram coda tun fuse ext3 jbd mbcache aes_i586 dm_crypt dm_mod ide_disk usbhid piix generic ide_core uhci_hcd usbcore CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00010246 (2.6.17-suspend2 #1) EIP is at submit_bio+0x7d/0x100 eax: 00000005 ebx: cfa39301 ecx: 00000000 edx: 00000008 esi: ce887d40 edi: ce887d40 ebp: 00000000 esp: cf785d38 ds: 007b es: 007b ss: 0068 Process nfsd4 (pid: 2490, threadinfo=cf784000 task=cf657090) Stack: ffffffff ffffffff fffffffe c035573b cf6aa860 00000000 ce887d40 c03f0340 00000000 c0179fa1 0000000c cffaa920 00000010 cfa393ac cf883000 cfa393ac ce887d40 00004800 c01763cb 00000001 cfa393ac cf883000 cfef1814 00000001 Call Trace: bio_alloc_bioset+0x91/0x150 submit_bh+0xeb/0x150 sync_dirty_buffer+0x3f/0xd0 __set_page_dirty_nobuffers+0xae/0x100 journal_update_superblock+0xbd/0xd0 [jbd] ext3_handle_error+0x56/0xb0 [ext3] printk+0x1b/0x20 ext3_error+0x55/0x60 [ext3] ext3_check_dir_entry+0x74/0x110 [ext3] ext3_readdir+0x3e0/0x610 [ext3] nfsd4_build_dentrylist+0x0/0x80 __wake_up_common+0x39/0x70 __mutex_lock_slowpath+0x1f7/0x4b0 vfs_readdir+0x73/0xb0 nfsd4_build_dentrylist+0x0/0x80 vfs_readdir+0x94/0xb0 nfsd4_list_rec_dir+0x92/0x160 purge_old+0x0/0x60 nfsd4_recdir_purge_old+0x1f/0x50 laundromat_main+0x48/0x250 run_workqueue+0x7b/0xf0 laundromat_main+0x0/0x250 worker_thread+0x107/0x130 default_wake_function+0x0/0x10 worker_thread+0x0/0x130 kthread+0xac/0xe0 kthread+0x0/0xe0 kernel_thread_helper+0x5/0x10 Code: 74 06 f6 47 11 01 74 23 89 f8 e8 df db ff ff 8b 5c 24 3c 8b 74 24 40 8b 7c 24 44 83 c4 48 c3 b8 18 00 00 00 e8 f5 09 f4 ff eb c5 <0f> 0b 38 0c 28 6d 36 c0 eb d3 8b 47 0c 8d 54 24 1c e8 9d 82 f9 EIP: [] submit_bio+0x7d/0x100 SS:ESP 0068:cf785d38 BUG: nfsd4/2490, lock held at task exit time! [c03a06e0] {client_mutex} .. held by: nfsd4: 2490 [cf657090, 110] ... acquired at: laundromat_main+0x1d/0x250 PM: Writing back config space on device 0000:00:00.0 at offset 1 (was 22100106, writing a2100106) PM: Writing back config space on device 0000:00:03.0 at offset f (was 74001ff, writing 5c001ff) PM: Writing back config space on device 0000:00:03.0 at offset 3 (was 822008, writing 82a820) ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PM: Writing back config space on device 0000:00:03.1 at offset f (was 74001ff, writing 54001ff) PM: Writing back config space on device 0000:00:03.1 at offset 3 (was 822008, writing 82a820) ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 pccard: CardBus card inserted into slot 1 ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PM: Writing back config space on device 0000:00:08.0 at offset 1 (was 2900005, writing 2900001) ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 pnp: Device 00:05 does not support activation. pnp: Device 00:06 does not support activation. pnp: Device 00:0d activated. 20%...40%...60%...80%...100%...done. Suspend2 debugging info: - SUSPEND core : 2.2.7.5 - Kernel Version : 2.6.17-suspend2 - Compiler vers. : 4.1 - Attempt number : 1 - Parameters : 0 16401 0 1 0 0 - Overall expected compression percentage: 50. - Compressor is 'lzf'. Compressed 135909376 bytes into 74813592 (44 percent compression). - Swapwriter inactive. - Filewriter active. Storage available for image: 65536 pages. - I/O speed: Write 8 MB/s, Read 12 MB/s. - Extra pages : -27 used/500. ext3_abort called. EXT3-fs error (device dm-3): ext3_journal_start_sb: Detected aborted journal Remounting filesystem read-only Thawing cpus ... Open file /root/suspend_file returned ffffffe2. PCI: Enabling device 0000:06:00.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 rt2500 1.1.0 CVS CVS http://rt2x00.serialmonkey.com PCI: Setting latency timer of device 0000:06:00.0 to 64 rt2500 EEPROM: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Channel rt2500 EEPROM: 1 1 1 1 1 1 1 1 1 1 1 1 1 1 dBm Maximum ip_tables: (C) 2000-2006 Netfilter Core Team