#daemon configuration
telnet_port 4444
gdb_port 3333
                                                                                                                                                             
#interface
interface ft2232
ft2232_device_desc "DLP2232M"
ft2232_layout "m5960"
ft2232_vid_pid 0x0403 0x6010
jtag_speed 0
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst
                                                                                                                                                             
jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag_device 4 0x1 0xf 0xe
                                                                                                                                                             
 
#target configuration
daemon_startup reset
#target <type> <endianess> <reset mode>
target arm9tdmi little reset_halt 0 arm920t
#working_area 0 0x200000 0x4000 backup
run_and_halt_time 0 5000
 
#flash configuration
#flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...]
flash bank cfi 0x00000000 0x1000000 2 2 0