Section "ServerLayout"

#	Screen         "aticonfig Screen 1" Relative  "Screen0" 1600 176
	Identifier     "Server Layout"
	Screen         "Screen0" 0 0
	InputDevice    "Mouse1" "CorePointer"
	InputDevice    "Keyboard1" "CoreKeyboard"

EndSection

Section "Files"

	RgbPath      "/usr/lib/X11/rgb"
	FontPath     "tcp/boris:7100"

EndSection

Section "Module"

	Load  "dbe"  	# Double buffer extension
	SubSection "extmod"
		Option	    "omit xfree86-dga"
	EndSubSection
	Load  "type1"
	Load  "freetype"
	Load  "glx"   # libglx.a
	Load  "dri"   # libdri.a

EndSection

Section "InputDevice"

	Identifier  "Keyboard1"
	Driver      "keyboard"
	Option	    "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
	Option	    "XkbModel" "pc104"
	#Option	    "XkbLayout" "dvorak"
	Option	    "XkbLayout" "en_US"

EndSection

Section "InputDevice"

	Identifier  "Mouse1"
	Driver      "mouse"
	Option	    "Protocol" "ImPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Device" "/dev/input/mice"

EndSection

Section "Monitor"

#	HorizSync    30.0 - 80.0
#	VertRefresh  50.0 - 75.0
#	Option	    "DPMS"

	Identifier   "Monitor0"
	DisplaySize  270	338

  # 1280x1024 @ 60.00 Hz (GTF) hsync: 63.60 kHz; pclk: 108.88 MHz
  Modeline "1280x1024_60.00"  108.88  1280 1360 1496 1712  1024 1025 1028 1060  -HSync +Vsync

EndSection

Section "Monitor"
	Identifier   "aticonfig Monitor 1"
	DisplaySize  294	393
EndSection

Section "Device"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.
#    Chipset     "generic"
# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# installed.
#    BusID       "PCI:0:10:0"
#    VideoRam    256
#    Clocks      25.2 28.3
	Identifier  "Standard VGA"
	Driver      "vga"
	VendorName  "Unknown"
	BoardName   "Unknown"
EndSection

Section "Device"

# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    # vendor=1002, device=4e45
	Option	    "VRefresh2" "50 - 75"
#	Option	    "UseFastTLS" "1"
	#Option "KernelModuleParm" "agplock=0"
#	Option "BackingStore" "true"
	Identifier  "ATI Graphics Adapter"
	Driver      "fglrx"
	Option	    "no_accel" "off"
	Option	    "no_dri" "off"
# === misc DRI settings ===
	Option	    "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
	Option	    "IgnoreEDID" "off"
	Option	    "DesktopSetup" "horizontal"
	Option	    "HSync2" "30 - 80"
	Option	    "ScreenOverlap" "0"
	Option	    "GammaCorrectionI" "0x06419064"
	Option	    "GammaCorrectionII" "0x06419064"
# === OpenGL specific profiles/settings ===
	Option	    "Capabilities" "0x00000800"
	Option	    "CapabilitiesEx" "0x00000000"
# === Video Overlay for the Xv extension ===
	Option	    "VideoOverlay" "on"
# === OpenGL Overlay ===
	Option	    "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
	Option	    "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
	Option	    "PseudoColorVisuals" "off"
# === QBS Management ===
	Option	    "Stereo" "off"
	Option	    "StereoSyncEnable" "1"
# === FSAA Management ===
	Option	    "FSAAEnable" "no"
	Option	    "FSAAScale" "1"
	Option	    "FSAADisableGamma" "off"
	Option	    "FSAACustomizeMSPos" "off"
	Option	    "FSAAMSPosX0" "0.000000"
	Option	    "FSAAMSPosY0" "0.000000"
	Option	    "FSAAMSPosX1" "0.000000"
	Option	    "FSAAMSPosY1" "0.000000"
	Option	    "FSAAMSPosX2" "0.000000"
	Option	    "FSAAMSPosY2" "0.000000"
	Option	    "FSAAMSPosX3" "0.000000"
	Option	    "FSAAMSPosY3" "0.000000"
	Option	    "FSAAMSPosX4" "0.000000"
	Option	    "FSAAMSPosY4" "0.000000"
	Option	    "FSAAMSPosX5" "0.000000"
	Option	    "FSAAMSPosY5" "0.000000"
# === Misc Options ===
	Option	    "BlockSignalsOnLock" "off"
	Option	    "UseInternalAGPGART" "off"
	Option	    "ForceGenericCPU" "off"
	Option	    "DPMS"
	#Option	    "KernelModuleParm" "0" # AGP locked user pages: enabled
	Option	    "ForceMonitors" "notv"
	Option	    "Mode2" "1280x1024"
#	Option	    "PairModes" "1600x1200+1280x1024"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "ATI Graphics Adapter 1"
	Driver      "fglrx"
	BusID       "PCI:1:0:1"
	Screen      1
EndSection

Section "Screen"

    #Option "backingstore"
	Identifier "Screen0"
	Device     "ATI Graphics Adapter"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"

  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
#		Modes    "1280x1024" "1024x768"
		Viewport   0 0
		Depth     24
		Modes    "1600x1200" "1280x1024" "1024x768"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig Screen 1"
	Device     "ATI Graphics Adapter 1"
	Monitor    "aticonfig Monitor 1"
	DefaultDepth     24
	SubSection "Display"
#		Viewport   1600 176
#		Virtual   1280 1024
		Depth     24
		Modes    "1280x1024"
	EndSubSection
EndSection

Section "DRI"

# Access to OpenGL ICD is allowed for all users:
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
	Mode         0666
EndSection