[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[17179569.184000]  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 511MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 131056
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000]   Normal zone: 126960 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.2 present.
[17179569.184000] ACPI: RSDP (v000 Nvidia                                ) @ 0x0 00f75e0
[17179569.184000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @  0x1fff3000
[17179569.184000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @  0x1fff3040
[17179569.184000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @  0x1fff7640
[17179569.184000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @  0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x4008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:10 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: BIOS IRQ0 pin2 override ignored.
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] ACPI: IRQ14 used by override.
[17179569.184000] ACPI: IRQ15 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:d ec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: BOOT_IMAGE=Ubuntu_6.06.1_LTS_on_hda1 ro r oot=/dev/hda1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[17179569.184000] Detected 1992.193 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179572.956000] Dentry cache hash table entries: 131072 (order: 7, 524288 byte s)
[17179572.956000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179572.968000] Memory: 508888k/524224k available (1976k kernel code, 14804k r eserved, 606k data, 288k init, 0k highmem)
[17179572.968000] Checking if this processor honours the WP bit even in supervis or mode... Ok.
[17179573.048000] Calibrating delay using timer specific routine.. 3988.54 BogoM IPS (lpj=7977098)
[17179573.048000] Security Framework v1.0.0 initialized
[17179573.048000] SELinux:  Disabled at boot.
[17179573.048000] Mount-cache hash table entries: 512
[17179573.048000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179573.048000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 0 0000000 00000000 00000000 00000000
[17179573.048000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/li ne)
[17179573.048000] CPU: L2 Cache: 512K (64 bytes/line)
[17179573.048000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 0000042 0 00000000 00000000 00000000
[17179573.048000] mtrr: v2.0 (20020519)
[17179573.048000] CPU: AMD Athlon(tm)  stepping 00
[17179573.048000] Enabling fast FPU save and restore... done.
[17179573.048000] Enabling unmasked SIMD FPU exception support... done.
[17179573.048000] Checking 'hlt' instruction... OK.
[17179573.064000] checking if image is initramfs... it is
[17179573.576000] Freeing initrd memory: 6617k freed
[17179573.588000] ACPI: Looking for DSDT ... not found!
[17179573.592000] ENABLING IO-APIC IRQs
[17179573.592000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[17179573.736000] NET: Registered protocol family 16
[17179573.736000] EISA bus registered
[17179573.736000] ACPI: bus type pci registered
[17179573.752000] PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3
[17179573.752000] PCI: Using configuration type 1
[17179573.752000] ACPI: Subsystem revision 20051216
[17179573.760000] ACPI: Interpreter enabled
[17179573.760000] ACPI: Using IOAPIC for interrupt routing
[17179573.760000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179573.760000] PCI: Probing PCI hardware (bus 00)
[17179573.764000] PCI: nForce2 C1 Halt Disconnect fixup
[17179573.764000] Boot video device is 0000:03:00.0
[17179573.764000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179573.836000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[17179573.836000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[17179573.836000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179573.840000] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14  15)
[17179573.840000] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14  15)
[17179573.840000] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14  15)
[17179573.840000] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179573.840000] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 10 *11 12 14  15)
[17179573.840000] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *9 10 11 12 14  15)
[17179573.840000] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *9 10 11 12 14  15)
[17179573.840000] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 *5 6 7 9 10 11 12 14  15)
[17179573.840000] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 *9 10 11 12 14  15)
[17179573.840000] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179573.840000] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14  15)
[17179573.840000] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 9 10 11 12 14  15)
[17179573.844000] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14  15)
[17179573.844000] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179573.844000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179573.844000] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[17179573.844000] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[17179573.844000] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[17179573.844000] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[17179573.844000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[17179573.844000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
[17179573.844000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
[17179573.844000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[17179573.844000] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[17179573.844000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
[17179573.848000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[17179573.848000] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[17179573.848000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
[17179573.848000] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[17179573.848000] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[17179573.848000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[17179573.852000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179573.852000] pnp: PnP ACPI init
[17179573.856000] pnp: PnP ACPI: found 16 devices
[17179573.856000] PnPBIOS: Disabled by ACPI PNP
[17179573.856000] PCI: Using ACPI for IRQ routing
[17179573.856000] PCI: If a device doesn't work, try "pci=routeirq".  If it help s, post a report
[17179573.912000] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
[17179573.912000] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[17179573.912000] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[17179573.912000] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
[17179573.912000] pnp: 00:00: ioport range 0x4200-0x427f has been reserved
[17179573.912000] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
[17179573.912000] pnp: 00:01: ioport range 0x5000-0x503f has been reserved
[17179573.912000] pnp: 00:01: ioport range 0x5500-0x553f has been reserved
[17179573.912000] PCI: Bridge: 0000:00:08.0
[17179573.912000]   IO window: 9000-afff
[17179573.912000]   MEM window: dc000000-ddffffff
[17179573.912000]   PREFETCH window: d8000000-d8ffffff
[17179573.912000] PCI: Bridge: 0000:00:1e.0
[17179573.912000]   IO window: c000-cfff
[17179573.912000]   MEM window: da000000-dbffffff
[17179573.912000]   PREFETCH window: b0000000-cfffffff
[17179573.912000] PCI: Setting latency timer of device 0000:00:08.0 to 64
[17179573.916000] audit: initializing netlink socket (disabled)
[17179573.916000] audit(1158532917.916:1): initialized
[17179573.916000] VFS: Disk quotas dquot_6.5.1
[17179573.916000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.916000] Initializing Cryptographic API
[17179573.916000] io scheduler noop registered
[17179573.916000] io scheduler anticipatory registered
[17179573.916000] io scheduler deadline registered
[17179573.916000] io scheduler cfq registered
[17179573.916000] isapnp: Scanning for PnP cards...
[17179574.268000] isapnp: No Plug & Play device found
[17179574.284000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179574.284000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179574.284000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179574.284000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ shar ing enabled
[17179574.284000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179574.284000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179574.288000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179574.288000] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179574.288000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 b locksize
[17179574.288000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179574.288000] ide: Assuming 33MHz system bus speed for PIO modes; override w ith idebus=xx
[17179574.288000] mice: PS/2 mouse device common for all mice
[17179574.288000] EISA: Probing bus 0 at eisa.0
[17179574.288000] Cannot allocate resource for EISA slot 4
[17179574.288000] Cannot allocate resource for EISA slot 5
[17179574.288000] EISA: Detected 0 cards.
[17179574.288000] NET: Registered protocol family 2
[17179574.328000] IP route cache hash table entries: 8192 (order: 3, 32768 bytes )
[17179574.328000] TCP established hash table entries: 32768 (order: 5, 131072 by tes)
[17179574.328000] TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
[17179574.328000] TCP: Hash tables configured (established 32768 bind 32768)
[17179574.328000] TCP reno registered
[17179574.328000] TCP bic registered
[17179574.328000] NET: Registered protocol family 1
[17179574.328000] NET: Registered protocol family 8
[17179574.328000] NET: Registered protocol family 20
[17179574.328000] Using IPI Shortcut mode
[17179574.328000] ACPI wakeup devices:
[17179574.328000] HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
[17179574.328000] ACPI: (supports S0 S1 S4 S5)
[17179574.328000] Freeing unused kernel memory: 288k freed
[17179574.344000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179574.368000] vga16fb: initializing
[17179574.368000] vga16fb: mapped to 0xc00a0000
[17179574.500000] Console: switching to colour frame buffer device 80x25
[17179574.500000] fb0: VGA16 VGA frame buffer device
[17179575.568000] Capability LSM initialized
[17179576.148000] SCSI subsystem initialized
[17179576.148000] ACPI: bus type scsi registered
[17179576.148000] libata version 1.20 loaded.
[17179576.148000] sata_sil 0000:01:0b.0: version 0.9
[17179576.148000] **** SET: Misaligned resource pointer: df3e9ae2 Type 07 Len 0
[17179576.148000] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[17179576.148000] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 ( level, high) -> IRQ 177
[17179576.148000] ata1: SATA max UDMA/100 cmd 0xE0860080 ctl 0xE086008A bmdma 0x E0860000 irq 177
[17179576.148000] ata2: SATA max UDMA/100 cmd 0xE08600C0 ctl 0xE08600CA bmdma 0x E0860008 irq 177
[17179576.352000] ata1: no device found (phy stat 00000000)
[17179576.352000] scsi0 : sata_sil
[17179576.556000] ata2: no device found (phy stat 00000000)
[17179576.556000] scsi1 : sata_sil
[17179576.592000] NFORCE2: IDE controller at PCI slot 0000:00:09.0
[17179576.592000] NFORCE2: chipset revision 162
[17179576.592000] NFORCE2: not 100% native mode: will probe irqs later
[17179576.592000] NFORCE2: BIOS didn't set cable bits correctly. Enabling workar ound.
[17179576.592000] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[17179576.592000]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb :DMA
[17179576.592000]     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd :DMA
[17179576.592000] Probing IDE interface ide0...
[17179576.888000] hda: Maxtor 6L250R0, ATA DISK drive
[17179577.560000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179577.584000] Probing IDE interface ide1...
[17179578.320000] hdc: HL-DT-ST DVDRAM GSA-4120B, ATAPI CD/DVD-ROM drive
[17179579.104000] hdd: TOSHIBA DVD-ROM SD-M1402, ATAPI CD/DVD-ROM drive
[17179579.160000] ide1 at 0x170-0x177,0x376 on irq 15
[17179579.172000] hda: max request size: 1024KiB
[17179579.180000] hda: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515 /255/63, UDMA(133)
[17179579.184000] hda: cache flushes supported
[17179579.184000]  hda: hda1 hda2 < hda5 hda6 >
[17179579.236000] hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179579.236000] Uniform CD-ROM driver Revision: 3.20
[17179579.244000] hdd: ATAPI 40X DVD-ROM drive, 128kB Cache, UDMA(33)
[17179579.424000] usbcore: registered new driver usbfs
[17179579.424000] usbcore: registered new driver hub
[17179579.428000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179579.428000] **** SET: Misaligned resource pointer: de835a02 Type 07 Len 0
[17179579.428000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[17179579.428000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 ( level, high) -> IRQ 185
[17179579.428000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179579.428000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[17179579.464000] ieee1394: Initialized config rom entry `ip1394'
[17179579.500000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus nu mber 1
[17179579.500000] ohci_hcd 0000:00:02.0: irq 185, io mem 0xde086000
[17179579.556000] hub 1-0:1.0: USB hub found
[17179579.556000] hub 1-0:1.0: 3 ports detected
[17179579.660000] **** SET: Misaligned resource pointer: de835502 Type 07 Len 0
[17179579.660000] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[17179579.660000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 ( level, high) -> IRQ 193
[17179579.660000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[17179579.660000] ohci_hcd 0000:00:02.1: OHCI Host Controller
[17179579.688000] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus nu mber 2
[17179579.688000] ohci_hcd 0000:00:02.1: irq 193, io mem 0xde081000
[17179579.744000] hub 2-0:1.0: USB hub found
[17179579.744000] hub 2-0:1.0: 3 ports detected
[17179579.848000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[17179579.848000] **** SET: Misaligned resource pointer: de835202 Type 07 Len 0
[17179579.848000] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 20
[17179579.848000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 20 ( level, high) -> IRQ 201
[17179579.848000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[17179579.900000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[201]  MMIO=[de08 4000-de0847ff]  Max Packet=[2048]
[17179579.904000] **** SET: Misaligned resource pointer: de835202 Type 07 Len 0
[17179579.904000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[17179579.904000] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 ( level, high) -> IRQ 185
[17179579.904000] PCI: Setting latency timer of device 0000:00:02.2 to 64
[17179579.904000] ehci_hcd 0000:00:02.2: EHCI Host Controller
[17179579.904000] ehci_hcd 0000:00:02.2: debug port 1
[17179579.904000] PCI: cache line size of 64 is not supported by device 0000:00: 02.2
[17179579.904000] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus nu mber 3
[17179579.904000] ehci_hcd 0000:00:02.2: irq 185, io mem 0xde082000
[17179579.904000] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 D ec 2004
[17179579.904000] hub 3-0:1.0: USB hub found
[17179579.904000] hub 3-0:1.0: 6 ports detected
[17179580.064000] Attempting manual resume
[17179580.072000] EXT3-fs: INFO: recovery required on readonly filesystem.
[17179580.072000] EXT3-fs: write access will be enabled during recovery.
[17179580.836000] usb 1-2: new full speed USB device using ohci_hcd and address 3
[17179581.012000] ohci1394: fw-host0: SelfID received outside of bus reset seque nce
[17179581.116000] ohci_hcd 0000:00:02.1: wakeup
[17179581.280000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179581.280000] hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
[17179581.280000] ide: failed opcode was: unknown
[17179581.280000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179581.280000] hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
[17179581.280000] ide: failed opcode was: unknown
[17179581.284000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e0180000717be8 ]
[17179581.292000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179581.292000] hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
[17179581.292000] ide: failed opcode was: unknown
[17179581.292000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179581.292000] hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
[17179581.292000] ide: failed opcode was: unknown
[17179581.340000] ide0: reset: success
[17179581.500000] usb 2-2: new full speed USB device using ohci_hcd and address 2
[17179581.576000] EXT3-fs: hda1: orphan cleanup on readonly fs
[17179581.576000] ext3_orphan_cleanup: deleting unreferenced inode 966796
[17179581.576000] ext3_orphan_cleanup: deleting unreferenced inode 966794
[17179581.576000] EXT3-fs: hda1: 2 orphan inodes deleted
[17179581.576000] EXT3-fs: recovery complete.
[17179581.576000] kjournald starting.  Commit interval 5 seconds
[17179581.576000] EXT3-fs: mounted filesystem with ordered data mode.
[17179590.172000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[17179590.172000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
[17179590.228000] Linux agpgart interface v0.101 (c) Dave Jones
[17179590.232000] agpgart: Detected NVIDIA nForce2 chipset
[17179590.236000] agpgart: AGP aperture is 128M @ 0xd0000000
[17179590.332000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179590.336000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179590.592000] **** SET: Misaligned resource pointer: dea9d222 Type 07 Len 0
[17179590.592000] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[17179590.592000] ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [APC2] -> GSI 17 ( level, high) -> IRQ 209
[17179590.592000] skge 1.5 addr 0xdd000000 irq 209 chip Yukon rev 1
[17179590.592000] skge eth0: addr 00:0e:a6:c4:c4:df
[17179590.808000] forcedeth.c: Reverse Engineered nForce ethernet driver. Versio n 0.54.
[17179590.812000] **** SET: Misaligned resource pointer: dea9d222 Type 07 Len 0
[17179590.812000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[17179590.812000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 21 ( level, high) -> IRQ 193
[17179590.812000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[17179590.840000] Linux video capture interface: v1.00
[17179590.880000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer d ev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6204
[17179590.880000] usbcore: registered new driver usblp
[17179590.880000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class dri ver
[17179590.908000] bttv: driver version 0.9.16 loaded
[17179590.908000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[17179590.920000] Real Time Clock Driver v1.12
[17179591.072000] logips2pp: Detected unknown logitech mouse model 56
[17179591.304000] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input1
[17179591.412000] Floppy drive(s): fd0 is 1.44M
[17179591.428000] eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
[17179591.428000] bttv: Bt8xx card found (0).
[17179591.428000] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 ( level, high) -> IRQ 209
[17179591.428000] bttv0: Bt878 (rev 17) at 0000:01:09.0, irq: 209, latency: 32, mmio: 0xd8000000
[17179591.428000] bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsys tem ID is 107d:6606
[17179591.428000] bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,a utodetected]
[17179591.428000] bttv0: gpio: en=00000000, out=00000000 in=00bff707 [init]
[17179591.432000] bttv0: using tuner=5
[17179591.432000] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[17179591.432000] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[17179591.436000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[17179591.440000] bttv0: i2c: checking for TDA9887 @ 0x86... not found
[17179591.440000] FDC 0 is a post-1991 82077
[17179591.444000] parport: PnPBIOS parport detected.
[17179591.444000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRIST ATE,COMPAT,ECP,DMA]
[17179591.488000] input: PC Speaker as /class/input/input2
[17179591.564000] tuner 2-0061: chip found @ 0xc2 (bt878 #0 [sw])
[17179591.564000] tuner 2-0061: type set to 5 (Philips PAL_BG (FI1216 and compat ibles))
[17179591.592000] bttv0: registered device video0
[17179591.592000] bttv0: registered device vbi0
[17179591.592000] bttv0: registered device radio0
[17179591.592000] bttv0: PLL: 28636363 => 35468950 .. ok
[17179591.624000] bttv0: add subdevice "remote0"
[17179591.700000] skge eth1: enabling interface
[17179591.732000] **** SET: Misaligned resource pointer: d84ef0c2 Type 07 Len 0
[17179591.732000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
[17179591.732000] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 20 ( level, high) -> IRQ 201
[17179591.732000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[17179591.732000] ts: Compaq touchscreen protocol output
[17179591.756000] bt878: AUDIO driver version 0.0.0 loaded
[17179592.052000] intel8x0_measure_ac97_clock: measured 4290990135 usecs
[17179592.052000] intel8x0: measured clock 0 rejected
[17179592.052000] intel8x0: clocking to 48000
[17179592.052000] bt878: Bt878 AUDIO function found (0).
[17179592.052000] ACPI: PCI Interrupt 0000:01:09.1[A] -> Link [APC2] -> GSI 17 ( level, high) -> IRQ 209
[17179592.052000] bt878(0): Bt878 (rev 17) at 01:09.1, irq: 209, latency: 32, me mory: 0xd8001000
[17179592.740000] NET: Registered protocol family 17
[17179593.048000] eth0: no link during initialization.
[17179593.392000] skge eth1: Link is up at 100 Mbps, full duplex, flow control t x and rx
[17179593.392000] lp0: using parport0 (interrupt-driven).
[17179593.424000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[17179593.424000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1 )
[17179593.424000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179593.480000] Adding 1542200k swap on /dev/hda5.  Priority:-1 extents:1 acro ss:1542200k
[17179593.636000] EXT3 FS on hda1, internal journal
[17179593.752000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179593.752000] md: bitmap version 4.39
[17179594.376000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@ redhat.com
[17179594.596000] cdrom: open failed.
[17179594.884000] cdrom: open failed.
[17179594.892000] cdrom: open failed.
[17179595.308000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[17179595.656000] NET: Registered protocol family 10
[17179595.656000] lo: Disabled Privacy Extensions
[17179595.656000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17179595.656000] IPv6 over IPv4 tunneling driver
[17179599.824000] ACPI: Power Button (FF) [PWRF]
[17179599.824000] ACPI: Power Button (CM) [PWRB]
[17179599.916000] ibm_acpi: ec object not found
[17179599.944000] pcc_acpi: loading...
[17179604.060000] ppdev: user-space parallel port driver
[17179604.696000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179604.696000] apm: overridden by ACPI.
[17179605.828000] eth1: no IPv6 routers present
[17179606.708000] Bluetooth: Core ver 2.8
[17179606.708000] NET: Registered protocol family 31
[17179606.708000] Bluetooth: HCI device and connection manager initialized
[17179606.708000] Bluetooth: HCI socket layer initialized
[17179606.732000] Bluetooth: L2CAP ver 2.8
[17179606.732000] Bluetooth: L2CAP socket layer initialized
[17179606.740000] Bluetooth: RFCOMM socket layer initialized
[17179606.740000] Bluetooth: RFCOMM TTY layer initialized
[17179606.740000] Bluetooth: RFCOMM ver 1.7
[17181428.000000] usb 3-6: new high speed USB device using ehci_hcd and address 4
[17181428.304000] Initializing USB Mass Storage driver...
[17181428.304000] scsi2 : SCSI emulation for USB Mass Storage devices
[17181428.304000] usb-storage: device found at 4
[17181428.304000] usb-storage: waiting for device to settle before scanning
[17181428.304000] usbcore: registered new driver usb-storage
[17181428.304000] USB Mass Storage support registered.
[17181439.916000] usb 3-6: reset high speed USB device using ehci_hcd and addres s 4
[17181450.160000] usb 3-6: reset high speed USB device using ehci_hcd and addres s 4
[17181450.408000] usb 3-6: reset high speed USB device using ehci_hcd and addres s 4
[17181460.652000] usb 3-6: reset high speed USB device using ehci_hcd and addres s 4
[17181460.784000]  2:0:0:0: scsi: Device offlined - not ready after error recove ry
[17181460.788000] usb-storage: device scan complete
[17181812.816000] Warning: /proc/ide/hd?/settings interface is obsolete, and wil l be removed soon!
[17181819.000000] kjournald starting.  Commit interval 5 seconds
[17181819.000000] EXT3 FS on hda6, internal journal
[17181819.000000] EXT3-fs: mounted filesystem with ordered data mode.
[17181850.868000] cdrom: This disc doesn't have any tracks I recognize!
[17181855.144000] cdrom: This disc doesn't have any tracks I recognize!
[17181857.756000] cdrom: This disc doesn't have any tracks I recognize!
galagonya@Gala-Masina:~$