Linux version 2.6.16.21-0.21-default (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 Tue Aug 29 16:42:05 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved) BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS) BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002ff40000 (usable) BIOS-e820: 000000002ff40000 - 000000002ff50000 (ACPI data) BIOS-e820: 000000002ff50000 - 0000000030000000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 767MB LOWMEM available. No mptable found. On node 0 totalpages: 196416 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 192320 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 DMI 2.3 present. IO/L-APIC allowed because system is MP or new enough ACPI: RSDP (v000 TOSHIB ) @ 0x000f01b0 ACPI: RSDT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x2ff40000 ACPI: FADT (v002 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x2ff40054 ACPI: BOOT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x2ff4002c ACPI: DSDT (v001 TOSHIB 6100 0x20021015 MSFT 0x0100000a) @ 0x00000000 ACPI: PM-Timer IO Port: 0xee08 Allocating PCI resources starting at 40000000 (gap: 30000000:ceda0000) Built 1 zonelists Kernel command line: root=/dev/hda6 vga=0x317 resume=/dev/hda7 splash=silent bootsplash: silent mode. Local APIC disabled by BIOS -- you can enable it with "lapic" Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 1694.767 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 773160k/785664k available (1490k kernel code, 11964k reserved, 608k data, 156k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3394.11 BogoMIPS (lpj=6788238) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 3febf9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 3febf9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: 3febf9ff 00000000 00000000 00000080 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.70GHz stepping 04 Checking 'hlt' instruction... OK. checking if image is initramfs... it is Freeing initrd memory: 2316k freed not found! ACPI: setting ELCR to 0200 (from 0e00) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd5ad, last bus=5 PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs *10) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12) ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI quirk: region ee00-ee7f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region eec0-eeff claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #05 (-#08) is hidden behind transparent bridge #02 (-#05) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently PCI: Bus #09 (-#0c) is hidden behind transparent bridge #02 (-#05) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: Power Resource [PFAN] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca) Setting up standard PCI resources PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: fd000000-fdffffff PREFETCH window: dbf00000-dfffffff PCI: Bus 3, cardbus bridge: 0000:02:0a.0 IO window: 0000d000-0000d0ff IO window: 0000d400-0000d4ff PREFETCH window: 40000000-41ffffff MEM window: 48000000-49ffffff PCI: Bus 5, cardbus bridge: 0000:02:0b.0 IO window: 0000d800-0000d8ff IO window: 0000dc00-0000dcff PREFETCH window: 42000000-43ffffff MEM window: 4a000000-4bffffff PCI: Bus 9, cardbus bridge: 0000:02:0b.1 IO window: 00001c00-00001cff IO window: 00002000-000020ff PREFETCH window: 44000000-45ffffff MEM window: 4c000000-4dffffff PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: fce00000-fcefffff PREFETCH window: 40000000-45ffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 PCI: Enabling device 0000:02:0a.0 (0000 -> 0003) ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 PCI: Enabling device 0000:02:0b.0 (0000 -> 0003) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Enabling device 0000:02:0b.1 (0000 -> 0003) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI Interrupt 0000:02:0b.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 Simple Boot Flag at 0x7c set to 0x1 apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1158564613.684:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) vesafb: framebuffer at 0xdc000000, mapped to 0xf0880000, using 6144k, total 32768k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c000:e720 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 47089 bytes,<6>...found (1024x768, 27542 bytes, v3). Console: switching to colour frame buffer device 124x44 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A PCI: Enabling device 0000:00:1f.6 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 input: PC Speaker as /class/input/input1 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Using IPI Shortcut mode ACPI wakeup devices: MPC0 MPC1 LAN VIY0 VIY1 COM USB1 USB2 USB3 AMDM LID ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 156k freed Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3M: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 ICH3M: chipset revision 2 ICH3M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xcfa0-0xcfa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xcfa8-0xcfaf, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: FUJITSU MHV2080AH, ATA DISK drive input: ImExPS/2 Logitech Wheel Mouse as /class/input/input2 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 hda7 hda8 > Probing IDE interface ide1... hdc: TOSHIBA DVD-ROM SD-R2102, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Thermal Zone [THRM] (28 C) ACPI: Fan [FAN] (off) Attempting manual resume ReiserFS: hda6: found reiserfs format "3.6" with standard journal ReiserFS: hda6: using ordered data mode reiserfs: using flush barriers ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda6: checking transaction log (hda6) ReiserFS: hda6: Using r5 hash to sort names pnp: Device 00:0b activated. parport: PnPBIOS parport detected. pnp: Device 00:0b disabled. ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:02:0a.0 [12a3:ab01] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:0a.0, mfunc 0x01000002, devctl 0x60 i8xx TCO timer: initialized (0xee60). heartbeat=30 sec (nowayout=0) usbcore: registered new driver usbfs usbcore: registered new driver hub Linux agpgart interface v0.101 (c) Dave Jones USB Universal Host Controller Interface driver v2.3 e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation Yenta: ISA IRQ mask 0x0000, PCI irq 11 Socket status: 30000010 pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff cs: IO port probe 0xd000-0xdfff: clean. pcmcia: parent PCI bridge Memory window: 0xfce00000 - 0xfcefffff pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x45ffffff hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:02:0b.0 [1179:0001] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000007 pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff cs: IO port probe 0xd000-0xdfff: clean. pcmcia: parent PCI bridge Memory window: 0xfce00000 - 0xfcefffff pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x45ffffff ACPI: PCI Interrupt 0000:02:0b.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:02:0b.1 [1179:0001] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000007 pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff cs: IO port probe 0xd000-0xdfff: clean. pcmcia: parent PCI bridge Memory window: 0xfce00000 - 0xfcefffff pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x45ffffff PCI: Enabling device 0000:00:1f.5 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.5 to 64 pccard: PCMCIA card inserted into slot 0 cs: memory probe 0xfce00000-0xfcefffff: excluding 0xfce00000-0xfce0ffff 0xfcef0000-0xfcefffff pcmcia: registering new device pcmcia0.0 orinoco 0.15rc3 (David Gibson , Pavel Roskin , et al) intel8x0_measure_ac97_clock: measured 55315 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000efe0 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.16.21-0.21-default uhci_hcd usb usb1: SerialNumber: 0000:00:1d.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000ef80 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.16.21-0.21-default uhci_hcd usb usb2: SerialNumber: 0000:00:1d.1 orinoco_cs 0.15rc3 (David Gibson , Pavel Roskin , et al) eth0: Hardware identity 0005:0004:0005:0000 eth0: Station identity 001f:0001:0008:000a eth0: Firmware determined as Lucent/Agere 8.10 eth0: Ad-hoc demo mode supported eth0: IEEE standard IBSS ad-hoc mode supported eth0: WEP supported, 104-bit key eth0: MAC address 00:02:2D:56:A0:A8 eth0: Station name "HERMES I" eth0: ready cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. eth0: index 0x01: Vcc 3.3, irq 11, io 0xd100-0xd13f cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. PCI: Enabling device 0000:00:1d.2 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 11, io base 0x000018c0 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.16.21-0.21-default uhci_hcd usb usb3: SerialNumber: 0000:00:1d.2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected eth0 renamed to eth1 agpgart: Detected an Intel i845 Chipset. usb 2-2: new full speed USB device using uhci_hcd and address 2 agpgart: AGP aperture is 256M @ 0xe0000000 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 e100: eth0: e100_probe: addr 0xfceff000, irq 11, MAC addr 00:08:0D:91:BD:33 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 usb 2-2: new device found, idVendor=058f, idProduct=9254 usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: Generic USB Hub usb 2-2: Manufacturer: ALCOR usb 2-2: configuration #1 chosen from 1 choice hub 2-2:1.0: USB hub found hub 2-2:1.0: 4 ports detected hw_random: RNG not detected usb 2-2.2: new full speed USB device using uhci_hcd and address 3 usb 2-2.2: new device found, idVendor=0ea0, idProduct=2168 usb 2-2.2: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-2.2: Product: Flash Disk usb 2-2.2: Manufacturer: USB usb 2-2.2: SerialNumber: 6072CB4110C0BC06 usb 2-2.2: configuration #1 chosen from 1 choice device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com dm-netlink version 0.0.2 loaded SCSI subsystem initialized Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage USB Mass Storage support registered. Vendor: TinyDisk Model: 2004-8-04 Rev: 2.00 Type: Direct-Access ANSI SCSI revision: 02 usb-storage: device scan complete loop: loaded (max 8 devices) ReiserFS: hda8: found reiserfs format "3.6" with standard journal ready SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 00 sda: assuming drive cache: write through SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 00 sda: assuming drive cache: write through sda: sda1 sd 0:0:0:0: Attached scsi removable disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 ReiserFS: hda8: using ordered data mode reiserfs: using flush barriers ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda8: checking transaction log (hda8) ReiserFS: hda8: Using r5 hash to sort names NTFS driver 2.1.26 [Flags: R/W MODULE]. NTFS volume version 3.1. AppArmor: AppArmor (version 2.0-19.43r6320) initialized audit(1158564641.473:2): AppArmor (version 2.0-19.43r6320) initialized Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1 across:1052216k ACPI: AC Adapter [ADP1] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Battery Slot [BAT2] (battery absent) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.18 toshiba_acpi: HCI method: \_SB_.VALD.GHCI BIOS EDD facility v0.16 2004-Jun-25, 1 devices found IA-32 Microcode Update Driver: v1.14 IA-32 Microcode Update Driver v1.14 unregistered pcmcia: Detected deprecated PCMCIA ioctl usage. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. powernow: This module only works with AMD K7 CPUs acpi-cpufreq: CPU0 - ACPI performance management activated. NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver ADDRCONF(NETDEV_UP): eth0: link is not ready e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: New link status: Disconnected (0002) ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth1: New link status: Connected (0001) ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready eth1: New link status: Disconnected (0002) NET: Registered protocol family 17 eth0: no IPv6 routers present eth1: no IPv6 routers present bootsplash: status on console 0 changed to on eth0: no IPv6 routers present spurious 8259A interrupt: IRQ7. eth1: New link status: Connected (0001) eth1: New link status: Disconnected (0002) eth1: New link status: Connected (0001) eth1: New link status: AP Out of Range (0004) eth1: New link status: AP In Range (0005) eth1: New link status: AP Out of Range (0004) eth1: New link status: AP In Range (0005) eth1: New link status: AP Out of Range (0004) eth1: New link status: AP In Range (0005) eth1: New link status: AP Out of Range (0004) eth1: New link status: AP In Range (0005) eth1: New link status: AP Out of Range (0004) eth1: New link status: AP In Range (0005) eth1: New link status: AP Out of Range (0004) eth1: New link status: AP In Range (0005) eth1: New link status: AP Out of Range (0004) eth1: New link status: AP In Range (0005) eth1: New link status: AP Out of Range (0004) eth1: New link status: AP In Range (0005) eth1: New link status: AP Out of Range (0004) eth1: New link status: AP In Range (0005) eth1: New link status: AP Out of Range (0004) eth1: New link status: AP In Range (0005) eth1: New link status: AP Out of Range (0004) eth1: New link status: AP In Range (0005) eth1: New link status: AP Out of Range (0004) eth1: New link status: AP In Range (0005) eth1: New link status: AP Out of Range (0004) jacques@cave:~>