<4>Bootdata ok (command line is initrd=initrd.img load_ramdisk=1 prompt_ramdisk=0 ramdisk_size=12800 rw root=/dev/ram SLACK_KERNEL=raid.s BOOT_IMAGE=/kernels/raid.s/bzImage )
<5>Linux version 2.6.16.20 (root@desktop) (gcc version 3.4.6) #3 SMP Wed Jun 14 16:20:36 BST 2006
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
<4> BIOS-e820: 000000000009bc00 - 000000000009c000 (reserved)
<4> BIOS-e820: 00000000000e9b90 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
<4> BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
<4> BIOS-e820: 000000007ffbe000 - 000000007ffe0000 (ACPI NVS)
<4> BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
<4> BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
<7>ACPI: RSDP (v002 ACPIAM                                ) @ 0x00000000000fb520
<7>ACPI: XSDT (v001 A M I  OEMXSDT  0x07000613 MSFT 0x00000097) @ 0x000000007ffb0100
<7>ACPI: FADT (v003 A M I  OEMFACP  0x07000613 MSFT 0x00000097) @ 0x000000007ffb0290
<7>ACPI: MADT (v001 A M I  OEMAPIC  0x07000613 MSFT 0x00000097) @ 0x000000007ffb0390
<7>ACPI: MCFG (v001 A M I  OEMMCFG  0x07000613 MSFT 0x00000097) @ 0x000000007ffb0400
<7>ACPI: OEMB (v001 A M I  AMI_OEM  0x07000613 MSFT 0x00000097) @ 0x000000007ffbe040
<7>ACPI: DSDT (v001  A0371 A0371001 0x00000001 INTL 0x02002026) @ 0x0000000000000000
<6>Scanning NUMA topology in Northbridge 24
<6>Number of nodes 1
<6>Node 0 MemBase 0000000000000000 Limit 000000007ffb0000
<7>NUMA: Using 63 for the hash shift.
<6>Using node hash shift of 63
<6>Bootmem setup node 0 0000000000000000-000000007ffb0000
<7>On node 0 totalpages: 515358
<7>  DMA zone: 2356 pages, LIFO batch:0
<7>  DMA32 zone: 513002 pages, LIFO batch:31
<7>  Normal zone: 0 pages, LIFO batch:0
<7>  HighMem zone: 0 pages, LIFO batch:0
<6>Nvidia board detected. Ignoring ACPI timer override.
<6>ACPI: PM-Timer IO Port: 0x508
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
<6>Processor #0 15:11 APIC version 16
<6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
<6>Processor #1 15:11 APIC version 16
<6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
<6>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<4>ACPI: BIOS IRQ0 pin2 override ignored.
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
<7>ACPI: IRQ9 used by override.
<7>ACPI: IRQ14 used by override.
<7>ACPI: IRQ15 used by override.
<6>Setting APIC routing to physical flat
<6>Using ACPI (MADT) for SMP configuration information
<6>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
<4>Checking aperture...
<4>CPU 0: aperture @ cd2000000 size 32 MB
<4>Aperture from northbridge cpu 0 too small (32 MB)
<4>No AGP bridge found
<6>SMP: Allowing 2 CPUs, 0 hotplug CPUs
<4>Built 1 zonelists
<5>Kernel command line: initrd=initrd.img load_ramdisk=1 prompt_ramdisk=0 ramdisk_size=12800 rw root=/dev/ram SLACK_KERNEL=raid.s BOOT_IMAGE=/kernels/raid.s/bzImage 
<4>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 131072 bytes)
<6>Disabling vsyscall due to use of PM timer
<6>time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
<6>time.c: Detected 2210.108 MHz processor.
<4>Console: colour VGA+ 80x25
<4>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
<4>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
<4>Memory: 2054108k/2096832k available (3575k kernel code, 42320k reserved, 1959k data, 232k init)
<4>Calibrating delay using timer specific routine.. 4427.99 BogoMIPS (lpj=8855989)
<4>Mount-cache hash table entries: 256
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 512K (64 bytes/line)
<6>CPU 0(2) -> Node 0 -> Core 0
<6>Using local APIC timer interrupts.
<4>result 12557453
<6>Detected 12.557 MHz APIC timer.
<6>Booting processor 1/2 APIC 0x1
<4>Initializing CPU#1
<4>Calibrating delay using timer specific routine.. 4420.45 BogoMIPS (lpj=8840901)
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 512K (64 bytes/line)
<6>CPU 1(2) -> Node 0 -> Core 1
<4>AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
<6>CPU 1: Syncing TSC to CPU 0.
<6>CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 571 cycles)
<6>Brought up 2 CPUs
<6>testing NMI watchdog ... OK.
<4>migration_cost=161
<6>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
<4>Freeing initrd memory: 3964k freed
<6>DMI 2.3 present.
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: Using configuration type 1
<6>PCI: Using MMCONFIG at e0000000
<6>ACPI: Subsystem revision 20060127
<6>ACPI: Interpreter enabled
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<7>PCI: Probing PCI hardware (bus 00)
<7>Boot video device is 0000:03:00.0
<6>PCI: Transparent bridge - 0000:00:12.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2P._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE1._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
<4>ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
<4>ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
<4>ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
<4>ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *5
<4>ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
<4>ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5
<4>ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
<4>ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
<4>ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>pnp: PnP ACPI: found 13 devices
<5>SCSI subsystem initialized
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
<6>PCI-DMA: Disabling IOMMU.
<6>pnp: 00:0a: ioport range 0xc00-0xc0f has been reserved
<6>pnp: 00:0a: ioport range 0xd00-0xd0f has been reserved
<6>pnp: 00:0a: ioport range 0xa20-0xa2f has been reserved
<6>pnp: 00:0a: ioport range 0xa30-0xa3f has been reserved
<6>PCI: Bridge: 0000:00:02.0
<6>  IO window: disabled.
<6>  MEM window: disabled.
<6>  PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:03.0
<6>  IO window: d000-dfff
<6>  MEM window: dfe00000-dfefffff
<6>  PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:04.0
<6>  IO window: e000-efff
<6>  MEM window: dff00000-dfffffff
<6>  PREFETCH window: c0000000-cfffffff
<6>PCI: Bridge: 0000:00:12.0
<6>  IO window: disabled.
<6>  MEM window: disabled.
<6>  PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:16.0
<6>  IO window: disabled.
<6>  MEM window: disabled.
<6>  PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:17.0
<6>  IO window: disabled.
<6>  MEM window: disabled.
<6>  PREFETCH window: disabled.
<7>PCI: Setting latency timer of device 0000:00:02.0 to 64
<7>PCI: Setting latency timer of device 0000:00:03.0 to 64
<7>PCI: Setting latency timer of device 0000:00:04.0 to 64
<7>PCI: Setting latency timer of device 0000:00:12.0 to 64
<7>PCI: Setting latency timer of device 0000:00:16.0 to 64
<7>PCI: Setting latency timer of device 0000:00:17.0 to 64
<4>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<6>JFS: nTxBlock = 8192, nTxLock = 65536
<6>SGI XFS with ACLs, large block/inode numbers, no debug enabled
<6>SGI XFS Quota Management subsystem
<6>Initializing Cryptographic API
<6>io scheduler noop registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<7>PCI: Setting latency timer of device 0000:00:02.0 to 64
<4>pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:02.0:pcie00]
<7>Allocate Port Service[0000:00:02.0:pcie03]
<7>PCI: Setting latency timer of device 0000:00:03.0 to 64
<4>pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:03.0:pcie00]
<7>Allocate Port Service[0000:00:03.0:pcie03]
<7>PCI: Setting latency timer of device 0000:00:04.0 to 64
<4>pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:04.0:pcie00]
<7>Allocate Port Service[0000:00:04.0:pcie03]
<7>PCI: Setting latency timer of device 0000:00:16.0 to 64
<4>pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:16.0:pcie00]
<7>Allocate Port Service[0000:00:16.0:pcie03]
<7>PCI: Setting latency timer of device 0000:00:17.0 to 64
<4>pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:17.0:pcie00]
<7>Allocate Port Service[0000:00:17.0:pcie03]
<7>vga16fb: initializing
<6>vga16fb: mapped to 0xffff8100000a0000
<4>Console: switching to colour frame buffer device 80x30
<6>fb0: VGA16 VGA frame buffer device
<6>ACPI: Power Button (FF) [PWRF]
<6>ACPI: Power Button (CM) [PWRB]
<6>ACPI: Processor [CPU1] (supports 8 throttling states)
<6>Real Time Clock Driver v1.12ac
<6>Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
<6>Linux agpgart interface v0.101 (c) Dave Jones
<6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
<4>isa bounce pool size: 16 pages
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 12800K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<4>Compaq SMART2 Driver (v 2.6.0)
<6>HP CISS Driver (v 2.6.10)
<6>tun: Universal TUN/TAP device driver, 1.6
<6>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<4>netconsole: not configured, aborting
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>NFORCE-CK804: IDE controller at PCI slot 0000:00:0f.0
<6>NFORCE-CK804: chipset revision 243
<6>NFORCE-CK804: not 100% native mode: will probe irqs later
<6>NFORCE-CK804: 0000:00:0f.0 (rev f3) UDMA133 controller
<6>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
<6>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
<7>Probing IDE interface ide0...
<7>Probing IDE interface ide1...
<4>hdc: DVD RW DRU-820A, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<7>Probing IDE interface ide0...
<6>hdc: ATAPI 126X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)
<6>Uniform CD-ROM driver Revision: 3.20
<6>Adaptec aacraid driver (1.1-4 Jun 14 2006 16:19:18)
<6>megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
<6>megaraid: 2.20.4.7 (Release Date: Mon Nov 14 12:27:22 EST 2005)
<6>megasas: 00.00.02.04 Fri Feb 03 14:31:44 PST 2006
<4>GDT-HA: Storage RAID Controller Driver. Version: 3.04 
<4>GDT-HA: Found 0 PCI Storage RAID Controllers
<4>3ware Storage Controller device driver for Linux v1.26.02.001.
<4>3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
<6>ipr: IBM Power RAID SCSI Device Driver version: 2.1.2 (February 8, 2006)
<5>usbmon: debugfs is not available
<7>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
<4>ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
<6>GSI 16 sharing vector 0xE1 and IRQ 16
<6>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 225
<7>PCI: Setting latency timer of device 0000:00:0b.0 to 64
<6>ohci_hcd 0000:00:0b.0: OHCI Host Controller
<6>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
<6>ohci_hcd 0000:00:0b.0: irq 225, io mem 0xdfdfa000
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 10 ports detected
<6>USB Universal Host Controller Interface driver v2.3
<6>usbcore: registered new driver usbhid
<6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
<6>mice: PS/2 mouse device common for all mice
<6>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
<6>oprofile: using NMI interrupt.
<6>NET: Registered protocol family 2
<6>input: AT Translated Set 2 keyboard as /class/input/input0
<4>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
<4>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
<4>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
<6>TCP: Hash tables configured (established 262144 bind 65536)
<6>TCP reno registered
<4>ip_conntrack version 2.4 (8192 buckets, 65536 max) - 296 bytes per conntrack
<6>TCP bic registered
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 10
<6>IPv6 over IPv4 tunneling driver
<6>NET: Registered protocol family 17
<6>powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.60.0)
<3>powernow-k8: MP systems not supported by PSB BIOS structure
<3>powernow-k8: MP systems not supported by PSB BIOS structure
<4>ACPI wakeup devices: 
<4>PS2K PS2M NSMB USB0 USB2 NMAC PB2P MC97 PCE0 PCE1 PCE2 PCE3 PCE4 PCE5 PWRB 
<6>ACPI: (supports S0 S1 S3 S4 S5)
<5>RAMDISK: Compressed image found at block 0
<4>VFS: Mounted root (ext2 filesystem).
<4>Freeing unused kernel memory: 232k freed
<6>input: ImPS/2 Generic Wheel Mouse as /class/input/input1