LINUX started... Config serial console: ttyS0,38400 CPU revision is: 00018448 Primary instruction cache 16kb, linesize 16 bytes (4 ways) Primary data cache 16kb, linesize 16 bytes (4 ways) Number of TLB entries 16. Linux version 2.4.17_mvl21-malta-mips_fp_le (root@richard) (gcc version 2.95.3 20010315 (release/MontaVista)) #40 Tue Apr 5 15:14:56 CST 2005 Determined physical RAM map: memory: 14000000 @ 00000000 (reserved) memory: 00020000 @ 14000000 (ROM data) memory: 00fe0000 @ 14020000 (usable) On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. .........boot_code Adam2........... ..00....90....1a....3c....80....0b....5a....27....08....00.. base address: 00000000 env size: 1431655765 ptr: a0000000 Kernel command line: calculating r4koff... 000b71b0(750000) CPU frequency 150.00 MHz Calibrating delay loop... 149.91 BogoMIPS Freeing Adam2 reserved memory [0x14001000,0x0001f000] Memory: 13928k/16384k available (1847k kernel code, 2456k reserved, 135k data, 64k init) Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes) Inode-cache hash table entries: 1024 (order: 1, 8192 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 TI Optimizations: Allocating TI-Cached Memory Pool. Warning: Number of buffers is not configured.Setting default to 512 Using 512 Buffers for TI-Cached Memory Pool. DEBUG: Using Hybrid Mode. NSP Optimizations: Succesfully allocated TI-Cached Memory Pool. Initializing RT netlink socket Starting kswapd Disabling the Out Of Memory Killer devfs: v1.7 (20011216) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 pty: 32 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with no serial options enabled ttyS00 at 0xa8610e00 (irq = 15) is a 16550A ttyS01 at 0xa8610f00 (irq = 16) is a 16550A Vlynq CONFIG_MIPS_AVALANCHE_VLYNQ_PORTS=2 Vlynq Device vlynq0 registered with minor no 63 as misc device. Result=0 Vlynq instance:0 Link UP Vlynq Device vlynq1 registered with minor no 62 as misc device. Result=0 VLYNQ 1 : init failed block: 64 slots per queue, batch=16 Using the MAC with external PHY Cpmac driver is allocating buffer memory at init time. Cpmac driver Disable TX complete interrupt setting threshold to 20. Default Asymmetric MTU for eth0 1500 PPP generic driver version 2.4.1 avalanche flash device: 0x400000 at 0x10000000. Amd/Fujitsu Extended Query Table v1.1 at 0x0040 Physically mapped flash: Swapping erase regions for broken CFI table. number of CFI chips: 1 Looking for mtd device :mtd0: Found a mtd0 image (0xe0000), with size (0x310000). Looking for mtd device :mtd1: Found a mtd1 image (0x20000), with size (0xc0000). Looking for mtd device :mtd2: Found a mtd2 image (0x0), with size (0x20000). Looking for mtd device :mtd3: Found a mtd3 image (0x3f0000), with size (0x10000). Looking for mtd device :mtd4: Found a mtd4 image (0x20000), with size (0x3d0000). Creating 5 MTD partitions on "Physically mapped flash": 0x000e0000-0x003f0000 : "mtd0" 0x00020000-0x000e0000 : "mtd1" 0x00000000-0x00020000 : "mtd2" 0x003f0000-0x00400000 : "mtd3" 0x00020000-0x003f0000 : "mtd4" NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 1024) IPv4 over IPv4 tunneling driver Default Asymmetric MTU for tunl0 1480 GRE over IPv4 tunneling driver Default Asymmetric MTU for gre0 1476 Linux IP multicast router 0.06 plus PIM-SM klips_info:ipsec_init: KLIPS startup, FreeS/WAN IPSec version: super-freeswan-1.99.8 Default Asymmetric MTU for ipsec0 0 Default Asymmetric MTU for ipsec1 0 Default Asymmetric MTU for ipsec2 0 Default Asymmetric MTU for ipsec3 0 Default Asymmetric MTU for ipsec4 0 klips_info:ipsec_alg_init: KLIPS alg v=0.8.1-0 (EALG_MAX=255, AALG_MAX=15) klips_info:ipsec_alg_init: calling ipsec_alg_static_init() ipsec_1des_init(alg_type=15 alg_id=2 name=1des): ret=0 You should NOT load 1DES support except for testing purposes ! ipsec_null_init(alg_type=15 alg_id=11 name=null): ret=0 ip_conntrack version 2.0 (128 buckets, 1024 max) - 364 bytes per conntrack ip_tables: (c)2000 Netfilter core team netfilter PSD loaded - (c) astaro AG NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 Initializing the WAN Bridge. Please set the MAC Address for the WAN Bridge. Set the Environment variable 'wan_br_mac'. MAC Address should be in the following format: xx.xx.xx.xx.xx.xx 802.1Q VLAN Support v1.6 Ben Greear vlan Initialization complete. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 64k freed Firmware Version: 1.00.47 Hit enter to continue...killall: httpd: no process killed