diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconf ig index 75824b7..0cb77aa 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -98,6 +98,14 @@ config DVB_USB_CXUSB Medion MD95700 hybrid USB2.0 device. DViCO FusionHDTV (Bluebird) USB2.0 devices +config DVB_USB_GL861 + tristate "Genesys Logic GL861 USB2.0 support" + depends on DVB_USB + select DVB_ZL10353 + help + Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0 + receiver with USB ID 0db0:5581. + config DVB_USB_DIGITV tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support" depends on DVB_USB diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Make file index 9643f56..4edee66 100644 --- a/drivers/media/dvb/dvb-usb/Makefile +++ b/drivers/media/dvb/dvb-usb/Makefile @@ -30,6 +30,9 @@ obj-$(CONFIG_DVB_USB_NOVA_T_USB2) += dvb dvb-usb-umt-010-objs = umt-010.o obj-$(CONFIG_DVB_USB_UMT_010) += dvb-usb-dibusb-common.o dvb-usb-umt-010.o +dvb-usb-gl861-objs = gl861.o +obj-$(CONFIG_DVB_USB_GL861) += dvb-usb-gl861.o + dvb-usb-digitv-objs = digitv.o obj-$(CONFIG_DVB_USB_DIGITV) += dvb-usb-digitv.o diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb /dvb-usb-ids.h index 9569891..8db8630 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -27,6 +27,7 @@ #define USB_VID_HYPER_PALTEK 0x1025 #define USB_VID_KWORLD 0xeb2a #define USB_VID_KYE 0x0458 #define USB_VID_MEDION 0x1660 +#define USB_VID_MSI 0x0db0 #define USB_VID_PINNACLE 0x2304 #define USB_VID_VISIONPLUS 0x13d3 #define USB_VID_TWINHAN 0x1822 @@ -101,6 +102,7 @@ #define USB_PID_DVICO_BLUEBIRD_DEE1601_W #define USB_PID_DIGITALNOW_BLUEBIRD_DEE1601_COLD 0xdb54 #define USB_PID_DIGITALNOW_BLUEBIRD_DEE1601_WARM 0xdb55 #define USB_PID_MEDION_MD95700 0x0932 +#define USB_PID_MEGASKY_55801 0x5581 #define USB_PID_KYE_DVB_T_COLD 0x701e #define USB_PID_KYE_DVB_T_WARM 0x701f #define USB_PID_PCTV_200E 0x020e diff --git a/drivers/media/dvb/dvb-usb/gl861.c b/drivers/media/dvb/dvb-usb/gl861 .c new file mode 100644 index 0000000..19c84dd --- /dev/null +++ b/drivers/media/dvb/dvb-usb/gl861.c @@ -0,0 +1,452 @@ +/* DVB USB compliant linux driver for GL861 USB2.0 devices. + * + * Based on usbsnoop, BDACap.inf, copy-paste and guessing. ;) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Fr ee + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "gl861.h" + +#include "zl10353.h" + +/* debug */ +int dvb_usb_gl861_debug; +module_param_named(debug,dvb_usb_gl861_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_S TATUS); + +static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr, + u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) +{ + u16 index; + u16 value = addr << 8; + int wo = (rbuf == NULL || rlen == 0); /* write-only */ + u8 req, type; + + if (wo) { + req = GL861_REQ_I2C_WRITE; + type = GL861_WRITE; + } else { /* rw */ + req = GL861_REQ_I2C_READ; + type = GL861_READ; + } + + if (wlen > 2) { + warn("wlen = %x, aborting.", wlen); + return -EINVAL; + } + + switch (wlen) { + case 1: + index = wbuf[0]; + break; + case 2: + index = wbuf[0]; + value = value + wbuf[1]; + break; + default: + return -EINVAL; + } + + return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), + req, /* request (I2C write: 0x01, I2C read: 0x02) */ + type, /* requesttype (read: 0xc0, write: 0x40) */ + value, /* value (0x1e00) */ + index, /* index (0x007f) */ + rbuf, /* readbuf */ + rlen, /* readlen */ + 2000); /* timeout */ +} + +/* I2C */ +static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + if (num > 2) + warn("more than 2 i2c messages at a time is not handled yet. TOD O."); + + for (i = 0; i < num; i++) { + /* write/read request */ + if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { + if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf, + msg[i].len, msg[i+1].buf, msg[i+1].len) < 0) + break; + i++; + } else + if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf, + msg[i].len, NULL, 0) < 0) + break; + } + + mutex_unlock(&d->i2c_mutex); + return i; +} + +static u32 gl861_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm gl861_i2c_algo = { + .master_xfer = gl861_i2c_xfer, + .functionality = gl861_i2c_func, +}; + +/* From http://www.linuxtv.org/pipermail/linux-dvb/2006-July/011538.html */ + +#define W 0 +#define R 1 +/* Not actual hw limits. */ +#define QT1010_MIN_STEP 2000000 +#define QT1010_MIN_FREQ 48000000 + +int qt1010_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters * params, u8 *buf, int buf_len) +{ + int i; + int div, mod; + struct { + u8 read, reg, value; +#if 0 + } rd[46] = { { W, 0x01, 0x80 }, + { W, 0x02, 0x3f }, + { W, 0x05, 0xff }, /* c */ + { W, 0x06, 0x44 }, + { W, 0x07, 0xff }, /* c */ + { W, 0x08, 0x08 }, + { W, 0x09, 0xff }, /* c */ + { W, 0x0a, 0xff }, /* c */ + { W, 0x0b, 0xff }, /* c */ + { W, 0x0c, 0xe1 }, + { W, 0x1a, 0xff }, /* 10 c */ + { W, 0x1b, 0x00 }, + { W, 0x1c, 0x89 }, + { W, 0x11, 0xff }, /* c */ + { W, 0x12, 0x91 }, + { W, 0x22, 0xff }, /* c */ + { W, 0x1e, 0x00 }, + { W, 0x1e, 0xd0 }, + { R, 0x22, 0xff }, /* c read */ + { W, 0x1e, 0x00 }, + { R, 0x05, 0xff }, /* 20 c read */ + { R, 0x22, 0xff }, /* c read */ + { W, 0x23, 0xd0 }, + { W, 0x1e, 0x00 }, + { W, 0x1e, 0xe0 }, + { R, 0x23, 0xff }, /* c read */ + { W, 0x1e, 0x00 }, + { W, 0x24, 0xd0 }, + { W, 0x1e, 0x00 }, + { W, 0x1e, 0xf0 }, + { R, 0x24, 0xff }, /* 30 c read */ + { W, 0x1e, 0x00 }, + { W, 0x14, 0x7f }, + { W, 0x15, 0x7f }, + { W, 0x05, 0xff }, /* c */ + { W, 0x06, 0x00 }, + { W, 0x15, 0x1f }, + { W, 0x16, 0xff }, + { W, 0x18, 0xff }, + { W, 0x1f, 0xff }, /* c */ + { W, 0x20, 0xff }, /* 40 c */ + { W, 0x21, 0x53 }, + { W, 0x25, 0xbd }, + { W, 0x26, 0x15 }, + { W, 0x02, 0x00 }, + { W, 0x01, 0x00 }, +#endif + } rd[47] = { { W, 0x01, 0x80 }, + { W, 0x02, 0x3f }, + { W, 0x05, 0x34 }, /* c */ + { W, 0x06, 0x44 }, + { W, 0x07, 0x37 }, /* c */ + { W, 0x08, 0x08 }, + { W, 0x09, 0x1c }, /* c */ + { W, 0x0a, 0x0d }, /* c */ + { W, 0x0b, 0x44 }, /* c */ + { W, 0x0c, 0xe1 }, + { W, 0x1a, 0xb8 }, /* 10 c */ + { W, 0x1b, 0x00 }, + { W, 0x1c, 0x89 }, + { W, 0x11, 0xfd }, /* c */ + { W, 0x12, 0x95 }, + { W, 0x22, 0xd6 }, /* c */ + { W, 0x1e, 0x00 }, + { W, 0x1e, 0xd0 }, + { R, 0x22, 0x00 }, /* c read */ + { W, 0x1e, 0x00 }, + { R, 0x05, 0x00 }, /* 20 c read */ + { R, 0x22, 0x00 }, /* c read */ + { W, 0x23, 0xd0 }, + { W, 0x1e, 0x00 }, + { W, 0x1e, 0xe0 }, + { R, 0x23, 0x00 }, /* c read */ + { W, 0x1e, 0x00 }, + { W, 0x24, 0xd0 }, + { W, 0x1e, 0x00 }, + { W, 0x1e, 0xf0 }, + { R, 0x24, 0x00 }, /* 30 c read */ + { W, 0x1e, 0x00 }, + { W, 0x14, 0x7f }, + { W, 0x15, 0x7f }, + { W, 0x05, 0x30 }, /* c */ + { W, 0x06, 0x00 }, + { W, 0x15, 0x1f }, + { W, 0x16, 0xff }, + { W, 0x18, 0xff }, + { W, 0x1f, 0x6a }, /* c */ + { W, 0x20, 0x13 }, /* 40 c */ + { W, 0x21, 0x53 }, + { W, 0x25, 0xb8 }, + { W, 0x26, 0x14 }, + { W, 0x00, 0x81 }, + { W, 0x02, 0x00 }, + { W, 0x01, 0x00 }, + }; + struct i2c_msg msg; + struct dvb_usb_device *d = fe->dvb->priv; + unsigned long freq = params->frequency; + + if (freq % QT1010_MIN_STEP) + deb_info("frequency not supported.\n"); + + (void) buf; + (void) buf_len; + + div = (freq - QT1010_MIN_FREQ) / QT1010_MIN_STEP; + mod = (div + 16 - 9) % 16; + +#if 0 + /* 0x5 */ + if (div >= 377) + rd[2].value = 0x74; + else if (div >= 265) + rd[2].value = 0x54; + else if (div >= 121) + rd[2].value = 0x34; + else + rd[2].value = 0x14; + + /* 0x7 */ + rd[4].value = (((freq - QT1010_MIN_FREQ) / 1000000) * 9975 + 12960000) / 320000; + + /* 09 */ + if (mod < 4) + rd[6].value = 0x1d; + else + rd[6].value = 0x1c; + + /* 0a */ + if (mod < 2) + rd[7].value = 0x09; + else if (mod < 4) + rd[7].value = 0x08; + else if (mod < 6) + rd[7].value = 0x0f; + else if (mod < 8) + rd[7].value = 0x0e; + else if (mod < 10) + rd[7].value = 0x0d; + else if (mod < 12) + rd[7].value = 0x0c; + else if (mod < 14) + rd[7].value = 0x0b; + else + rd[7].value = 0x0a; + + /* 0b */ + if (div & 1) + rd[8].value = 0x45; + else + rd[8].value = 0x44; + + /* 1a */ + if (div & 1) + rd[10].value = 0x78; + else + rd[10].value = 0xf8; + + /* 11 */ + if (div >= 265) + rd[13].value = 0xf9; + else if (div >= 121) + rd[13].value = 0xfd; + else + rd[13].value = 0xf9; + + /* 22 */ + if (div < 201) + rd[15].value = 0xd0; + else if (div < 217) + rd[15].value = 0xd3; + else if (div < 233) + rd[15].value = 0xd6; + else if (div < 249) + rd[15].value = 0xd9; + else if (div < 265) + rd[15].value = 0xda; + else + rd[15].value = 0xd0; + + /* 05 */ + if (div >= 377) + rd[34].value = 0x70; + else if (div >= 265) + rd[34].value = 0x50; + else if (div >= 121) + rd[34].value = 0x30; + else + rd[34].value = 0x10; + + /* 1f */ + if (mod < 4) + rd[39].value = 0x64; + else if (mod < 6) + rd[39].value = 0x66; + else if (mod < 8) + rd[39].value = 0x67; + else if (mod < 12) + rd[39].value = 0x68; + else if (mod < 14) + rd[39].value = 0x69; + else + rd[39].value = 0x6a; + + /* 20 */ + if (mod < 4) + rd[40].value = 0x10; + else if (mod < 6) + rd[40].value = 0x11; + else if (mod < 10) + rd[40].value = 0x12; + else if (mod < 12) + rd[40].value = 0x13; + else if (mod < 14) + rd[40].value = 0x14; + else + rd[40].value = 0x15; + + deb_info("Now tuning... "); + for (i = 0; i < sizeof(rd) / sizeof(*rd); i++) { + if (rd[i].read) + continue; + + msg.flags = 0; + msg.len = 2; + msg.addr = 0xc4; + msg.buf = &rd[i].reg; + + if (i2c_transfer(&d->i2c_adap, &msg, 1) != 1) { + deb_info("tuner write failed\n"); + return -EIO; + } + } + deb_info("done\n"); +#endif + + return 0; +} +#undef W +#undef R + +static struct zl10353_config gl861_zl10353_config = { + .demod_address = 0x1e, +}; + +static int gl861_frontend_attach(struct dvb_usb_device *d) +{ + if ((d->fe = zl10353_attach(&gl861_zl10353_config, + &d->i2c_adap)) != NULL) { + d->fe->ops.tuner_ops.calc_regs = qt1010_set_params; + return 0; + } + + return -EIO; +} + +/* DVB USB Driver stuff */ +static struct dvb_usb_properties gl861_properties; + +static int gl861_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf, &gl861_properties, THIS_MODULE, NULL); +} + +static struct usb_device_id gl861_table [] = { + { USB_DEVICE(USB_VID_MSI, USB_PID_MEGASKY_55801) }, + {} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, gl861_table); + +static struct dvb_usb_properties gl861_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + + .size_of_priv = 0, + + .frontend_attach = gl861_frontend_attach, + + .i2c_algo = &gl861_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 7, + .endpoint = 0x81, + .u = { + .bulk = { + .buffersize = 512, + } + } + }, + + .num_device_descs = 1, + .devices = { + { "MSI Mega Sky 55801 DVB-T USB2.0", + { NULL }, + { &gl861_table[0], NULL }, + }, + } +}; + +static struct usb_driver gl861_driver = { + .name = "gl861", + .probe = gl861_probe, + .disconnect = dvb_usb_device_exit, + .id_table = gl861_table, +}; + +/* module stuff */ +static int __init gl861_module_init(void) +{ + int result; + if ((result = usb_register(&gl861_driver))) { + err("usb_register failed. Error number %d",result); + return result; + } + + return 0; +} + +static void __exit gl861_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&gl861_driver); +} + +module_init (gl861_module_init); +module_exit (gl861_module_exit); + +MODULE_DESCRIPTION("Driver for Genesys Logic GL861 DVB-T USB2.0 devices."); +MODULE_VERSION("0.1"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/gl861.h b/drivers/media/dvb/dvb-usb/gl861 .h new file mode 100644 index 0000000..5f28dab --- /dev/null +++ b/drivers/media/dvb/dvb-usb/gl861.h @@ -0,0 +1,16 @@ +#ifndef _DVB_USB_GL861_H_ +#define _DVB_USB_GL861_H_ + +#define DVB_USB_LOG_PREFIX "gl861" +#include "dvb-usb.h" + +extern int dvb_usb_gl861_debug; +#define deb_info(args...) dprintk(dvb_usb_gl861_debug,0x01,args) + +#define GL861_WRITE 0x40 +#define GL861_READ 0xc0 + +#define GL861_REQ_I2C_WRITE 0x01 +#define GL861_REQ_I2C_READ 0x02 + +#endif