root@1[knoppix]# cd /dev/mapper
root@1[mapper]# ls -l
total 0
crw-rw---- 1 root root 10, 63 2006-09-25 23:48 control
root@1[mapper]# dmraid -ay
root@1[mapper]# ls -l
total 0
crw-rw---- 1 root root  10, 63 2006-09-25 23:48 control
brw-rw---- 1 root disk 253,  0 2006-09-26 00:44 nvidia_ageeibge
brw-rw---- 1 root disk 253,  1 2006-09-26 00:44 nvidia_ageeibge1
brw-rw---- 1 root disk 253,  2 2006-09-26 00:44 nvidia_ageeibge2
root@1[mapper]# mkdir /mnt/ntfs
root@1[mapper]# mkdir /mnt/rsfs
root@1[mapper]# mount /dev/mapper/nvidia_ageeibge1 /mnt/ntfs
root@1[mapper]# mount /dev/mapper/nvidia_ageeibge2 /mnt/rsfs
root@1[mapper]# clear






root@1[mapper]# dmraid -r
/dev/sda: nvidia, "nvidia_ageeibge", stripe, ok, 488397166 sectors, data@ 0
/dev/sdb: nvidia, "nvidia_ageeibge", stripe, ok, 488397166 sectors, data@ 0
/dev/sdc: nvidia, "nvidia_ageeibge", stripe, ok, 488397166 sectors, data@ 0
/dev/sdd: nvidia, "nvidia_ageeibge", stripe, ok, 488397166 sectors, data@ 0
root@1[mapper]# dmraid -s
*** Active Set
name   : nvidia_ageeibge
size   : 1953588664
stride : 8
type   : stripe
status : ok
subsets: 0
devs   : 4
spares : 0
root@1[mapper]# mount
/dev/root on / type ext2 (rw)
/proc on /proc type proc (rw)
/dev/pts on /dev/pts type devpts (rw)
/sys on /sys type sysfs (rw)
/dev/hdc on /cdrom type iso9660 (ro)
/dev/loop0 on /KNOPPIX type squashfs (ro)
/dev/hdc on /cdrom type iso9660 (ro)
/dev/loop0 on /KNOPPIX type squashfs (ro)
/ramdisk on /ramdisk type tmpfs (rw,size=1640784k)
proc on /proc type proc (rw)
/dev/pts on /dev/pts type devpts (rw,mode=0622)
/proc/bus/usb on /proc/bus/usb type usbfs (rw,devmode=0666)
/none on /KNOPPIX type unionfs (rw,dirs=/tmp/union/:/KNOPPIX)
/dev/mapper/nvidia_ageeibge1 on /mnt/ntfs type ntfs (rw)
/dev/mapper/nvidia_ageeibge2 on /mnt/rsfs type reiserfs (rw)
root@1[mapper]# dmesg
:00:17.0:pcie00]
vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 3072k, total 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:a412
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:0f.0
NFORCE-CK804: chipset revision 243
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:0f.0 (rev f3) UDMA133 controller
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
Probing IDE interface ide1...
hdc: DVD RW DRU-820A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide0...
hdc: ATAPI 94X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
libata version 1.20 loaded.
sata_sil24 0000:01:00.0: version 0.23
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKB] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:01:00.0 to 64
ata1: SATA max UDMA/100 cmd 0xF8830000 ctl 0x0 bmdma 0x0 irq 225
ata2: SATA max UDMA/100 cmd 0xF8832000 ctl 0x0 bmdma 0x0 irq 225
ata1: SATA link down (SStatus 0)
scsi0 : sata_sil24
ata2: SATA link down (SStatus 0)
scsi1 : sata_sil24
sata_nv 0000:00:10.0: version 0.8
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:10.0 to 64
ata3: SATA max UDMA/133 cmd 0xAC00 ctl 0xA882 bmdma 0xA400 irq 233
ata4: SATA max UDMA/133 cmd 0xA800 ctl 0xA482 bmdma 0xA408 irq 233
ata3: SATA link up 3.0 Gbps (SStatus 123)
ata3: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:407f
ata3: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata3: dev 0 configured for UDMA/133
scsi2 : sata_nv
ata4: SATA link up 3.0 Gbps (SStatus 123)
ata4: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:407f
ata4: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata4: dev 0 configured for UDMA/133
scsi3 : sata_nv
  Vendor: ATA       Model: WDC WD2500KS-00M  Rev: 02.0
  Type:   Direct-Access                      ANSI SCSI revision: 05
  Vendor: ATA       Model: WDC WD2500KS-00M  Rev: 02.0
  Type:   Direct-Access                      ANSI SCSI revision: 05
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LSA1] -> GSI 22 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:11.0 to 64
ata5: SATA max UDMA/133 cmd 0xA080 ctl 0xA002 bmdma 0x9800 irq 50
ata6: SATA max UDMA/133 cmd 0x9C00 ctl 0x9882 bmdma 0x9808 irq 50
ata5: SATA link up 3.0 Gbps (SStatus 123)
ata5: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:407f
ata5: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata5: dev 0 configured for UDMA/133
scsi4 : sata_nv
ata6: SATA link up 3.0 Gbps (SStatus 123)
ata6: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:407f
ata6: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata6: dev 0 configured for UDMA/133
scsi5 : sata_nv
  Vendor: ATA       Model: WDC WD2500KS-00M  Rev: 02.0
  Type:   Direct-Access                      ANSI SCSI revision: 05
  Vendor: ATA       Model: WDC WD2500KS-00M  Rev: 02.0
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2
sd 2:0:0:0: Attached scsi disk sda
SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
 sdb: sdb1
sd 3:0:0:0: Attached scsi disk sdb
SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
 sdc: unknown partition table
sd 4:0:0:0: Attached scsi disk sdc
SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: drive cache: write back
SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: drive cache: write back
 sdd: sdd1
sd 5:0:0:0: Attached scsi disk sdd
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: Attached scsi generic sg3 type 0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: pIII_sse
   pIII_sse  :  6976.000 MB/sec
raid5: using function: pIII_sse (6976.000 MB/sec)
raid6: int32x1    947 MB/s
raid6: int32x2    862 MB/s
input: AT Translated Set 2 keyboard as /class/input/input0
raid6: int32x4    658 MB/s
raid6: int32x8    608 MB/s
raid6: mmxx1     1773 MB/s
raid6: mmxx2     3267 MB/s
raid6: sse1x1    1644 MB/s
raid6: sse1x2    2669 MB/s
raid6: sse2x1    2779 MB/s
raid6: sse2x2    3680 MB/s
raid6: using algorithm sse2x2 (3680 MB/s)
md: raid6 personality registered for level 6
md: multipath personality registered for level -4
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
device-mapper: dm-multipath version 1.0.4 loaded
device-mapper: dm-round-robin version 1.0.0 loaded
device-mapper: dm-emc version 0.0.3 loaded
EDAC MC: Ver: 2.0.0 Sep 12 2006
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
NET: Registered protocol family 1
Starting balanced_irq
Using IPI No-Shortcut mode
Suspend2 Core.
Suspend2 Compression Driver loading.
Suspend2 Encryption Driver loading.
Suspend2 Swap Writer loading.
Suspend2 FileWriter loading.
Replacing swsusp.
Suspend2 2.2.7.5: You need to use a resume2= command line parameter to tell Suspend2 where to look for an image.
Suspend2 2.2.7.5: Resume2 parameter is empty. Suspending will be disabled.
Suspend2 2.2.7.5: Missing or invalid storage location (resume2= parameter). Please correct and rerun lilo (or equivalent) before suspending.
ACPI wakeup devices:
PS2K PS2M UAR1 NSMB USB0 USB2 NMAC PB2P MC97 PCE0 PCE1 PCE2 PCE3 PCE4 PCE5 PWRB
ACPI: (supports S0 S1 S3 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
NTFS driver 2.1.27 [Flags: R/W MODULE].
loop: loaded (max 8 devices)
squashfs: version 3.1 (2006/08/19) Phillip Lougher
ISO 9660 Extensions: Microsoft Joliet Level 3
hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
hdc: cdrom_decode_status: error=0x44 { AbortedCommand LastFailedSense=0x04 }
ide: failed opcode was: unknown
hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
hdc: cdrom_decode_status: error=0x44 { AbortedCommand LastFailedSense=0x04 }
ide: failed opcode was: unknown
hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
hdc: cdrom_decode_status: error=0x44 { AbortedCommand LastFailedSense=0x04 }
ide: failed opcode was: unknown
hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
hdc: cdrom_decode_status: error=0x44 { AbortedCommand LastFailedSense=0x04 }
ide: failed opcode was: unknown
hdc: DMA disabled
hdc: ide_intr: huh? expected NULL handler on exit
hdc: ATAPI reset complete
ISO 9660 Extensions: RRIP_1991A
Freeing unused kernel memory: 308k freed
ieee1394: Initialized config rom entry `ip1394'
input: PC Speaker as /class/input/input1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
VFS: busy inodes on changed media.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Buffer I/O error on device sda2, logical block 209728384
Buffer I/O error on device sda2, logical block 209728385
Buffer I/O error on device sda2, logical block 209728386
Buffer I/O error on device sda2, logical block 209728387
Buffer I/O error on device sda2, logical block 209728388
Buffer I/O error on device sda2, logical block 209728389
Buffer I/O error on device sda2, logical block 209728390
Buffer I/O error on device sda2, logical block 209728391
Buffer I/O error on device sda2, logical block 209728384
Buffer I/O error on device sda2, logical block 209728385
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LMAC] -> GSI 21 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:13.0 to 64
forcedeth: using HIGHDMA
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
parport: PnPBIOS parport detected.
pnp: Device 00:06 disabled.
eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:13.0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 18 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 v1.6.1 addr 0xdfdfc000 irq 66 Yukon-EC (0xb6) rev 2
sky2 eth1: addr 00:17:31:9f:c7:62
sky2 0000:02:00.0: No interrupt was generated using MSI, switching to INTx mode. Please report this failure to the PCI maintainer and include system chipset information.
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x600
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x700
ACPI: PCI Interrupt 0000:04:0b.0[A] -> Link [LNKA] -> GSI 18 (level, low) -> IRQ 66
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[66]  MMIO=[dffff800-dfffffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 20 (level, low) -> IRQ 82
PCI: Setting latency timer of device 0000:00:0b.0 to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0b.0: irq 82, io mem 0xdfbfa000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:0b.1 to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:0b.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:0b.1
ehci_hcd 0000:00:0b.1: irq 233, io mem 0xdfbfbc00
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LACI] -> GSI 22 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:0d.0 to 64
ohci_hcd 0000:00:0b.0: wakeup
intel8x0_measure_ac97_clock: measured 58688 usecs
intel8x0: clocking to 46950
usb 1-1: new low speed USB device using ohci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d80000ace4d9]
usbcore: registered new driver hiddev
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input2
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:0b.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
ts: Compaq touchscreen protocol output
Capability LSM initialized
printk: 686 messages suppressed.
Buffer I/O error on device sda2, logical block 209728384
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
Using specific hotkey driver
ACPI: Processor [CPU1] (supports 8 throttling states)
fuse init (API version 7.6)
NET: Registered protocol family 17
sky2 eth1: enabling interface
powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.60.2)
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
powernow: This module only works with AMD K7 CPUs
Linux agpgart interface v0.101 (c) Dave Jones
sky2 eth1: disabling interface
eth0: link down.
eth0: link up.
eth0: link down.
eth0: link up.
Registering unionfs 1.3
unionfs: debugging is not enabled
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.7
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
NTFS volume version 3.1.
ReiserFS: dm-2: found reiserfs format "3.5" with standard journal
ReiserFS: dm-2: using ordered data mode
ReiserFS: dm-2: journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-2: checking transaction log (dm-2)
ReiserFS: dm-2: Using r5 hash to sort names
ReiserFS: dm-2: using 3.5.x disk format
(i-search)`':