=== START OF INFORMATION SECTION === Model Family: IBM/Hitachi Travelstar 60GH and 40GN family Device Model: IC25N030ATCS04-0 Serial Number: CSH305DADGAWUB Firmware Version: CA3OA72A User Capacity: 30,005,821,440 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: ATA/ATAPI-5 T13 1321D revision 3 Local Time is: Thu Sep 28 02:13:35 2006 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 645) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 37) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 090 090 062 Pre-fail Always - 65600 2 Throughput_Performance 0x0005 102 102 040 Pre-fail Offline - 6042 3 Spin_Up_Time 0x0007 133 133 033 Pre-fail Always - 1 4 Start_Stop_Count 0x0012 091 091 000 Old_age Always - 15481 5 Reallocated_Sector_Ct 0x0033 045 045 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 134 134 040 Pre-fail Offline - 30 9 Power_On_Hours 0x0012 077 077 000 Old_age Always - 10511 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1034 191 G-Sense_Error_Rate 0x000a 097 097 000 Old_age Always - 196611 192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 222 193 Load_Cycle_Count 0x0012 056 056 000 Old_age Always - 440029 194 Temperature_Celsius 0x0002 130 130 000 Old_age Always - 42 (Lifetime Min/Max 8/57)196 Reallocated_Event_Count 0x0032 054 054 000 Old_age Always - 1138 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 16 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 9540 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 9540 occurred at disk power-on lifetime: 10509 hours (437 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 36 7c 0b 31 e2 Error: IDNF 54 sectors at LBA = 0x02310b7c = 36768636 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 3f 73 0b 31 e2 00 00:00:19.000 READ DMA c8 03 3f 34 0b 31 e2 00 00:00:19.000 READ DMA c8 03 3f f5 0a 31 e2 00 00:00:19.000 READ DMA c8 03 3f b6 0a 31 e2 00 00:00:19.000 READ DMA c8 03 3f 77 0a 31 e2 00 00:00:19.000 READ DMA Error 9539 occurred at disk power-on lifetime: 10510 hours (437 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 b0 80 80 31 e2 Error: UNC at LBA = 0x02318080 = 36798592 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 20 00 b0 80 80 31 e2 00 00:35:38.600 READ SECTOR(S) 10 00 3f 00 00 00 e0 00 00:35:38.600 RECALIBRATE [OBS-4] 91 00 3f 3f ff 3f ef 00 00:35:38.600 INITIALIZE DEVICE PARAMETERS [OBS-6] 20 00 b0 80 80 31 e2 04 00:35:38.500 READ SECTOR(S) 20 00 b0 80 80 31 e2 00 00:35:28.500 READ SECTOR(S) Error 9538 occurred at disk power-on lifetime: 10510 hours (437 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 b0 80 80 31 e2 Error: IDNF at LBA = 0x02318080 = 36798592 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 20 00 b0 80 80 31 e2 00 00:35:19.300 READ SECTOR(S) 20 00 b1 7f 80 31 e2 00 00:35:09.800 READ SECTOR(S) 10 00 3f 00 00 00 e0 00 00:35:09.800 RECALIBRATE [OBS-4] 91 00 3f 3f ff 3f ef 00 00:35:09.800 INITIALIZE DEVICE PARAMETERS [OBS-6] 20 00 b1 7f 80 31 e2 04 00:35:09.700 READ SECTOR(S) Error 9537 occurred at disk power-on lifetime: 10510 hours (437 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 b1 7f 80 31 e2 Error: UNC at LBA = 0x0231807f = 36798591 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 20 00 b1 7f 80 31 e2 00 00:35:09.800 READ SECTOR(S) 10 00 3f 00 00 00 e0 00 00:35:09.800 RECALIBRATE [OBS-4] 91 00 3f 3f ff 3f ef 00 00:35:09.800 INITIALIZE DEVICE PARAMETERS [OBS-6] 20 00 b1 7f 80 31 e2 04 00:35:09.700 READ SECTOR(S) 20 00 b1 7f 80 31 e2 00 00:35:00.400 READ SECTOR(S) Error 9536 occurred at disk power-on lifetime: 10510 hours (437 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 b1 7f 80 31 e2 Error: IDNF at LBA = 0x0231807f = 36798591 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 20 00 b1 7f 80 31 e2 00 00:35:00.400 READ SECTOR(S) 20 00 b1 7f 80 31 e2 00 00:34:51.000 READ SECTOR(S) 10 00 3f 00 00 00 e0 00 00:34:51.000 RECALIBRATE [OBS-4] 20 00 b1 7f 80 31 e2 00 00:34:41.600 READ SECTOR(S) 20 00 00 30 80 31 e2 00 00:34:32.100 READ SECTOR(S) SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 50% 10508 36768636 # 2 Short offline Completed without error 00% 0 -