Paketlisten werden gelesen... Abhängigkeitsbaum wird aufgebaut... Lese Status-Informationen ein... Reading extended state information... Initializing package states... The following NEW packages will be installed: fancontrol{a} libsensors4{a} lm-sensors The following partially installed packages will be configured: xbmc-live 0 packages upgraded, 3 newly installed, 0 to remove and 0 not upgraded. Need to get 210kB of archives. After unpacking 786kB will be used. Writing extended state information... Get:1 http://ppa.launchpad.net karmic/main libsensors4 1:3.1.2-2~ppa1 [54,2kB] Get:2 http://ppa.launchpad.net karmic/main fancontrol 1:3.1.2-2~ppa1 [40,9kB] Get:3 http://ppa.launchpad.net karmic/main lm-sensors 1:3.1.2-2~ppa1 [115kB] Fetched 210kB in 2s (97,4kB/s) Wähle vormals abgewähltes Paket libsensors4. (Lese Datenbank ... (Lese Datenbank ... 5% (Lese Datenbank ... 10% (Lese Datenbank ... 15% (Lese Datenbank ... 20% (Lese Datenbank ... 25% (Lese Datenbank ... 30% (Lese Datenbank ... 35% (Lese Datenbank ... 40% (Lese Datenbank ... 45% (Lese Datenbank ... 50% (Lese Datenbank ... 55% (Lese Datenbank ... 60% (Lese Datenbank ... 65% (Lese Datenbank ... 70% (Lese Datenbank ... 75% (Lese Datenbank ... 80% (Lese Datenbank ... 85% (Lese Datenbank ... 90% (Lese Datenbank ... 95% (Lese Datenbank ... 100% (Lese Datenbank ... 40869 Dateien und Verzeichnisse sind derzeit installiert.) Entpacke libsensors4 (aus .../libsensors4_1%3a3.1.2-2~ppa1_amd64.deb) ... Wähle vormals abgewähltes Paket fancontrol. Entpacke fancontrol (aus .../fancontrol_1%3a3.1.2-2~ppa1_all.deb) ... Wähle vormals abgewähltes Paket lm-sensors. Entpacke lm-sensors (aus .../lm-sensors_1%3a3.1.2-2~ppa1_amd64.deb) ... Verarbeite Trigger für man-db ... Verarbeite Trigger für ureadahead ... ureadahead will be reprofiled on next reboot Richte xbmc-live ein (1:9.11-karmic1) ... update-rc.d: warning: /etc/init.d/xbmc-live missing LSB information update-rc.d: see start: Job failed to start invoke-rc.d: initscript xbmc-live, action "start" failed. dpkg: Fehler beim Bearbeiten von xbmc-live (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück Richte libsensors4 ein (1:3.1.2-2~ppa1) ... Richte fancontrol ein (1:3.1.2-2~ppa1) ... Richte lm-sensors ein (1:3.1.2-2~ppa1) ... Verarbeite Trigger für libc-bin ... ldconfig deferred processing now taking place Fehler traten auf beim Bearbeiten von: xbmc-live E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Richte xbmc-live ein (1:9.11-karmic1) ... update-rc.d: warning: /etc/init.d/xbmc-live missing LSB information update-rc.d: see start: Job failed to start invoke-rc.d: initscript xbmc-live, action "start" failed. dpkg: Fehler beim Bearbeiten von xbmc-live (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück Fehler traten auf beim Bearbeiten von: xbmc-live Paketlisten werden gelesen... Abhängigkeitsbaum wird aufgebaut... Lese Status-Informationen ein... Reading extended state information... Initializing package states... Writing extended state information... Paketlisten werden gelesen... Abhängigkeitsbaum wird aufgebaut... Lese Status-Informationen ein... Reading extended state information... Initializing package states... The following NEW packages will be installed: binutils{a} gcc{a} gcc-4.4{a} libc-dev-bin{a} libc6-dev{a} libgomp1{a} linux-libc-dev{a} linux-source linux-source-2.6.31{a} The following partially installed packages will be configured: xbmc-live 0 packages upgraded, 9 newly installed, 0 to remove and 0 not upgraded. Need to get 63,0MB/70,4MB of archives. After unpacking 94,0MB will be used. Writing extended state information... Get:1 http://ppa.launchpad.net karmic/main linux-libc-dev 2.6.32-17.26~ricotz1 [784kB] Get:2 http://de.archive.ubuntu.com karmic-updates/main linux-source-2.6.31 2.6.31-20.58 [62,2MB] Get:3 http://de.archive.ubuntu.com karmic-updates/main linux-source 2.6.31.20.33 [3.394B] Fetched 63,0MB in 5Min 1s (209kB/s) Wähle vormals abgewähltes Paket binutils. (Lese Datenbank ... (Lese Datenbank ... 5% (Lese Datenbank ... 10% (Lese Datenbank ... 15% (Lese Datenbank ... 20% (Lese Datenbank ... 25% (Lese Datenbank ... 30% (Lese Datenbank ... 35% (Lese Datenbank ... 40% (Lese Datenbank ... 45% (Lese Datenbank ... 50% (Lese Datenbank ... 55% (Lese Datenbank ... 60% (Lese Datenbank ... 65% (Lese Datenbank ... 70% (Lese Datenbank ... 75% (Lese Datenbank ... 80% (Lese Datenbank ... 85% (Lese Datenbank ... 90% (Lese Datenbank ... 95% (Lese Datenbank ... 100% (Lese Datenbank ... 40928 Dateien und Verzeichnisse sind derzeit installiert.) Entpacke binutils (aus .../binutils_2.20-0ubuntu2_amd64.deb) ... Wähle vormals abgewähltes Paket libgomp1. Entpacke libgomp1 (aus .../libgomp1_4.4.1-4ubuntu9_amd64.deb) ... Wähle vormals abgewähltes Paket gcc-4.4. Entpacke gcc-4.4 (aus .../gcc-4.4_4.4.1-4ubuntu9_amd64.deb) ... Wähle vormals abgewähltes Paket gcc. Entpacke gcc (aus .../gcc_4%3a4.4.1-1ubuntu2_amd64.deb) ... Wähle vormals abgewähltes Paket libc-dev-bin. Entpacke libc-dev-bin (aus .../libc-dev-bin_2.10.1-0ubuntu16_amd64.deb) ... Wähle vormals abgewähltes Paket linux-libc-dev. Entpacke linux-libc-dev (aus .../linux-libc-dev_2.6.32-17.26~ricotz1_amd64.deb) ... Wähle vormals abgewähltes Paket libc6-dev. Entpacke libc6-dev (aus .../libc6-dev_2.10.1-0ubuntu16_amd64.deb) ... Wähle vormals abgewähltes Paket linux-source-2.6.31. Entpacke linux-source-2.6.31 (aus .../linux-source-2.6.31_2.6.31-20.58_all.deb) ... Wähle vormals abgewähltes Paket linux-source. Entpacke linux-source (aus .../linux-source_2.6.31.20.33_all.deb) ... Verarbeite Trigger für man-db ... Richte xbmc-live ein (1:9.11-karmic1) ... update-rc.d: warning: /etc/init.d/xbmc-live missing LSB information update-rc.d: see start: Job failed to start invoke-rc.d: initscript xbmc-live, action "start" failed. dpkg: Fehler beim Bearbeiten von xbmc-live (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück Richte binutils ein (2.20-0ubuntu2) ... Richte libgomp1 ein (4.4.1-4ubuntu9) ... Richte gcc-4.4 ein (4.4.1-4ubuntu9) ... Richte gcc ein (4:4.4.1-1ubuntu2) ... Richte libc-dev-bin ein (2.10.1-0ubuntu16) ... Richte linux-libc-dev ein (2.6.32-17.26~ricotz1) ... Richte libc6-dev ein (2.10.1-0ubuntu16) ... Richte linux-source-2.6.31 ein (2.6.31-20.58) ... Richte linux-source ein (2.6.31.20.33) ... Verarbeite Trigger für libc-bin ... ldconfig deferred processing now taking place Fehler traten auf beim Bearbeiten von: xbmc-live E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Richte xbmc-live ein (1:9.11-karmic1) ... update-rc.d: warning: /etc/init.d/xbmc-live missing LSB information update-rc.d: see start: Job failed to start invoke-rc.d: initscript xbmc-live, action "start" failed. dpkg: Fehler beim Bearbeiten von xbmc-live (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück Fehler traten auf beim Bearbeiten von: xbmc-live Paketlisten werden gelesen... Abhängigkeitsbaum wird aufgebaut... Lese Status-Informationen ein... Reading extended state information... Initializing package states... Writing extended state information... Paketlisten werden gelesen... Abhängigkeitsbaum wird aufgebaut... Lese Status-Informationen ein... Reading extended state information... Initializing package states... The following NEW packages will be installed: build-essential dpkg-dev{a} fakeroot{a} g++{a} g++-4.4{a} libstdc++6-4.4-dev{a} patch{a} The following partially installed packages will be configured: xbmc-live 0 packages upgraded, 7 newly installed, 0 to remove and 0 not upgraded. Need to get 7.610kB/7.836kB of archives. After unpacking 25,6MB will be used. Writing extended state information... Get:1 http://de.archive.ubuntu.com karmic-updates/main libstdc++6-4.4-dev 4.4.1-4ubuntu9 [1.526kB] Get:2 http://de.archive.ubuntu.com karmic-updates/main g++-4.4 4.4.1-4ubuntu9 [5.502kB] Get:3 http://de.archive.ubuntu.com karmic/main g++ 4:4.4.1-1ubuntu2 [1.448B] Get:4 http://de.archive.ubuntu.com karmic-updates/main dpkg-dev 1.15.4ubuntu2.1 [573kB] Get:5 http://de.archive.ubuntu.com karmic/main build-essential 11.4 [7.170B] Fetched 7.610kB in 7s (1.004kB/s) Wähle vormals abgewähltes Paket libstdc++6-4.4-dev. (Lese Datenbank ... (Lese Datenbank ... 5% (Lese Datenbank ... 10% (Lese Datenbank ... 15% (Lese Datenbank ... 20% (Lese Datenbank ... 25% (Lese Datenbank ... 30% (Lese Datenbank ... 35% (Lese Datenbank ... 40% (Lese Datenbank ... 45% (Lese Datenbank ... 50% (Lese Datenbank ... 55% (Lese Datenbank ... 60% (Lese Datenbank ... 65% (Lese Datenbank ... 70% (Lese Datenbank ... 75% (Lese Datenbank ... 80% (Lese Datenbank ... 85% (Lese Datenbank ... 90% (Lese Datenbank ... 95% (Lese Datenbank ... 100% (Lese Datenbank ... 42263 Dateien und Verzeichnisse sind derzeit installiert.) Entpacke libstdc++6-4.4-dev (aus .../libstdc++6-4.4-dev_4.4.1-4ubuntu9_amd64.deb) ... Wähle vormals abgewähltes Paket g++-4.4. Entpacke g++-4.4 (aus .../g++-4.4_4.4.1-4ubuntu9_amd64.deb) ... Wähle vormals abgewähltes Paket g++. Entpacke g++ (aus .../g++_4%3a4.4.1-1ubuntu2_amd64.deb) ... Wähle vormals abgewähltes Paket patch. Entpacke patch (aus .../patch_2.5.9-5_amd64.deb) ... Wähle vormals abgewähltes Paket dpkg-dev. Entpacke dpkg-dev (aus .../dpkg-dev_1.15.4ubuntu2.1_all.deb) ... Wähle vormals abgewähltes Paket build-essential. Entpacke build-essential (aus .../build-essential_11.4_amd64.deb) ... Wähle vormals abgewähltes Paket fakeroot. Entpacke fakeroot (aus .../fakeroot_1.12.4ubuntu1_amd64.deb) ... Verarbeite Trigger für man-db ... Richte xbmc-live ein (1:9.11-karmic1) ... update-rc.d: warning: /etc/init.d/xbmc-live missing LSB information update-rc.d: see start: Job failed to start invoke-rc.d: initscript xbmc-live, action "start" failed. dpkg: Fehler beim Bearbeiten von xbmc-live (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück Richte patch ein (2.5.9-5) ... Richte dpkg-dev ein (1.15.4ubuntu2.1) ... Richte fakeroot ein (1.12.4ubuntu1) ... update-alternatives: Verwende /usr/bin/fakeroot-sysv, um /usr/bin/fakeroot (fakeroot) in Auto-Modus bereitzustellen. Richte libstdc++6-4.4-dev ein (4.4.1-4ubuntu9) ... Richte g++-4.4 ein (4.4.1-4ubuntu9) ... Richte g++ ein (4:4.4.1-1ubuntu2) ... update-alternatives: Verwende /usr/bin/g++, um /usr/bin/c++ (c++) in Auto-Modus bereitzustellen. Richte build-essential ein (11.4) ... Fehler traten auf beim Bearbeiten von: xbmc-live E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Richte xbmc-live ein (1:9.11-karmic1) ... update-rc.d: warning: /etc/init.d/xbmc-live missing LSB information update-rc.d: see start: Job failed to start invoke-rc.d: initscript xbmc-live, action "start" failed. dpkg: Fehler beim Bearbeiten von xbmc-live (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück Fehler traten auf beim Bearbeiten von: xbmc-live Paketlisten werden gelesen... Abhängigkeitsbaum wird aufgebaut... Lese Status-Informationen ein... Reading extended state information... Initializing package states... Writing extended state information... --2010-03-21 17:58:27-- http://dl.dropbox.com/u/4953107/XCI/TempSensors/coretemp.patch Resolving dl.dropbox.com... 75.101.142.97, 75.101.136.120, 75.101.148.191, ... Connecting to dl.dropbox.com|75.101.142.97|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 3441 (3,4K) [text/x-diff] Saving to: `coretemp.patch' 0K ... 100% 27,0K=0,1s 2010-03-21 17:58:28 (27,0 KB/s) - `coretemp.patch' saved [3441/3441] patching file Documentation/hwmon/coretemp patching file drivers/hwmon/coretemp.c make: Entering directory `/usr/src/linux-headers-2.6.31-20-generic' CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/hwmon-vid.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/asb100.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/w83627hf.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/w83792d.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/w83793.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/w83781d.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/w83791d.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/abituguru.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/abituguru3.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/ad7414.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/ad7418.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/adcxx.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/adm1021.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/adm1025.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/adm1026.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/adm1029.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/adm1031.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/adm9240.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/ads7828.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/adt7462.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/adt7470.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/adt7473.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/adt7475.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/applesmc.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/asus_atk0110.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/atxp1.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/coretemp.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/dme1737.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/ds1621.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/f71805f.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/f71882fg.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/f75375s.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/fscher.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/fschmd.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/fscpos.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/g760a.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/gl518sm.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/gl520sm.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/hdaps.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/i5k_amb.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/ibmaem.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/ibmpex.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/it87.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/k8temp.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lis3lv02d.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/hp_accel.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm63.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm70.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm75.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm77.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm78.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm80.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm83.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm85.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm87.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm90.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm92.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm93.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm95241.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/ltc4215.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/ltc4245.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/max1111.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/max1619.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/max6650.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/pc87360.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/pc87427.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/pcf8591.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/sht15.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/sis5595.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/smsc47b397.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/smsc47m1.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/smsc47m192.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/thmc50.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/tmp401.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/via686a.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/vt1211.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/vt8231.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/w83627ehf.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/w83l785ts.o CC [M] /usr/src/linux-source-2.6.31/drivers/hwmon/w83l786ng.o Building modules, stage 2. MODPOST 80 modules WARNING: modpost: Found 10 section mismatch(es). To see full details build your kernel with: 'make CONFIG_DEBUG_SECTION_MISMATCH=y' CC /usr/src/linux-source-2.6.31/drivers/hwmon/abituguru.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/abituguru3.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/ad7414.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/ad7418.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/adcxx.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/adm1021.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/adm1025.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/adm1026.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/adm1029.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/adm1031.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/adm9240.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/ads7828.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/adt7462.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/adt7470.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/adt7473.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/adt7475.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/applesmc.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/asb100.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/asus_atk0110.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/atxp1.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/coretemp.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/dme1737.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/ds1621.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/f71805f.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/f71882fg.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/f75375s.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/fscher.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/fschmd.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/fscpos.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/g760a.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/gl518sm.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/gl520sm.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/hdaps.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/hp_accel.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/hwmon-vid.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/i5k_amb.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/ibmaem.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/ibmpex.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/it87.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/k8temp.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/lis3lv02d.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/lm63.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/lm70.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/lm75.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/lm77.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/lm78.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/lm80.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/lm83.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/lm85.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/lm87.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/lm90.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/lm92.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/lm93.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/lm95241.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/ltc4215.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/ltc4245.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/max1111.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/max1619.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/max6650.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/pc87360.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/pc87427.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/pcf8591.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/sht15.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/sis5595.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/smsc47b397.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/smsc47m1.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/smsc47m192.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/thmc50.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/tmp401.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/via686a.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/vt1211.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/vt8231.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/w83627ehf.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/w83627hf.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/w83781d.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/w83791d.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/w83792d.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/w83793.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/w83l785ts.mod.o CC /usr/src/linux-source-2.6.31/drivers/hwmon/w83l786ng.mod.o LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/abituguru.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/abituguru3.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/ad7414.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/ad7418.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/adcxx.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/adm1021.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/adm1025.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/adm1026.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/adm1029.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/adm1031.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/adm9240.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/ads7828.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/adt7462.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/adt7470.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/adt7473.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/adt7475.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/applesmc.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/asb100.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/asus_atk0110.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/atxp1.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/coretemp.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/dme1737.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/ds1621.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/f71805f.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/f71882fg.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/f75375s.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/fscher.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/fschmd.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/fscpos.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/g760a.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/gl518sm.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/gl520sm.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/hdaps.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/hp_accel.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/hwmon-vid.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/i5k_amb.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/ibmaem.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/ibmpex.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/it87.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/k8temp.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lis3lv02d.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm63.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm70.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm75.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm77.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm78.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm80.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm83.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm85.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm87.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm90.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm92.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm93.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/lm95241.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/ltc4215.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/ltc4245.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/max1111.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/max1619.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/max6650.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/pc87360.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/pc87427.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/pcf8591.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/sht15.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/sis5595.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/smsc47b397.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/smsc47m1.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/smsc47m192.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/thmc50.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/tmp401.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/via686a.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/vt1211.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/vt8231.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/w83627ehf.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/w83627hf.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/w83781d.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/w83791d.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/w83792d.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/w83793.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/w83l785ts.ko LD [M] /usr/src/linux-source-2.6.31/drivers/hwmon/w83l786ng.ko make: Leaving directory `/usr/src/linux-headers-2.6.31-20-generic' --2010-03-21 18:01:59-- http://dl.dropbox.com/u/4953107/XCI/TempSensors/sensors-detect Resolving dl.dropbox.com... 75.101.142.97, 75.101.136.120, 75.101.148.191, ... Connecting to dl.dropbox.com|75.101.142.97|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 169271 (165K) [application/octet-stream] Saving to: `sensors-detect' 0K .......... .......... .......... .......... .......... 30% 96,4K 1s 50K .......... .......... .......... .......... .......... 60% 343K 0s 100K .......... .......... .......... .......... .......... 90% 446K 0s 150K .......... ..... 100% 991K=0,8s 2010-03-21 18:02:01 (209 KB/s) - `sensors-detect' saved [169271/169271] --2010-03-21 18:02:01-- http://dl.dropbox.com/u/4953107/XCI/TempSensors/sensors-input Resolving dl.dropbox.com... 75.101.142.97, 75.101.136.120, 75.101.148.191, ... Connecting to dl.dropbox.com|75.101.142.97|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 21 [application/octet-stream] Saving to: `sensors-input' 0K 100% 721K=0s 2010-03-21 18:02:02 (721 KB/s) - `sensors-input' saved [21/21] # sensors-detect revision 5822 (2010-02-04 09:14:10 +0100) # System: Acer Aspire R3610 # Board: Acer FMCP7A-ION-LE This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No Intel Core family thermal sensor... No Intel Atom thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... Yes Found `ITE IT8720F Super IO Sensors' Success! (address 0xa10, driver `it87') Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Some systems (mainly servers) implement IPMI, a set of common interfaces through which system health data may be retrieved, amongst other things. We first try to get the information from SMBIOS. If we don't find it there, we have to read from arbitrary I/O ports to probe for such interfaces. This is normally safe. Do you want to scan for IPMI interfaces? (YES/no): Probing for `IPMI BMC KCS' at 0xca0... No Probing for `IPMI BMC SMIC' at 0xca8... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): Using driver `i2c-nforce2' for device 0000:00:03.2: nVidia Corporation nForce SMBus (MCP79) Module i2c-dev loaded successfully. Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `it87': * ISA bus, address 0xa10 Chip `ITE IT8720F Super IO Sensors' (confidence: 9) Driver `coretemp': * Chip `Intel Atom thermal sensor' (confidence: 9) Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO): Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensors for initialization at boot time. You should now start the lm_sensors service to load the required kernel modules. Unloading i2c-dev... OK * Setting sensors limits ...done. Paketlisten werden gelesen... Abhängigkeitsbaum wird aufgebaut... Lese Status-Informationen ein... Reading extended state information... Initializing package states... The following NEW packages will be installed: autoconf{a} automake autotools-dev{a} cvs m4{a} update-inetd{a} The following partially installed packages will be configured: xbmc-live 0 packages upgraded, 6 newly installed, 0 to remove and 0 not upgraded. Need to get 3.199kB of archives. After unpacking 8.618kB will be used. Writing extended state information... Get:1 http://de.archive.ubuntu.com karmic/main m4 1.4.13-2 [286kB] Get:2 http://de.archive.ubuntu.com karmic/main autoconf 2.64-1ubuntu1 [558kB] Get:3 http://de.archive.ubuntu.com karmic/main autotools-dev 20090427.1 [63,7kB] Get:4 http://de.archive.ubuntu.com karmic/main automake 1:1.11-1 [559kB] Get:5 http://de.archive.ubuntu.com karmic/main update-inetd 4.31 [16,9kB] Get:6 http://de.archive.ubuntu.com karmic/main cvs 1:1.12.13-12ubuntu1 [1.716kB] Vorkonfiguration der Pakete ... Fetched 3.199kB in 4s (783kB/s) Wähle vormals abgewähltes Paket m4. (Lese Datenbank ... (Lese Datenbank ... 5% (Lese Datenbank ... 10% (Lese Datenbank ... 15% (Lese Datenbank ... 20% (Lese Datenbank ... 25% (Lese Datenbank ... 30% (Lese Datenbank ... 35% (Lese Datenbank ... 40% (Lese Datenbank ... 45% (Lese Datenbank ... 50% (Lese Datenbank ... 55% (Lese Datenbank ... 60% (Lese Datenbank ... 65% (Lese Datenbank ... 70% (Lese Datenbank ... 75% (Lese Datenbank ... 80% (Lese Datenbank ... 85% (Lese Datenbank ... 90% (Lese Datenbank ... 95% (Lese Datenbank ... 100% (Lese Datenbank ... 43233 Dateien und Verzeichnisse sind derzeit installiert.) Entpacke m4 (aus .../archives/m4_1.4.13-2_amd64.deb) ... Wähle vormals abgewähltes Paket autoconf. Entpacke autoconf (aus .../autoconf_2.64-1ubuntu1_all.deb) ... Wähle vormals abgewähltes Paket autotools-dev. Entpacke autotools-dev (aus .../autotools-dev_20090427.1_all.deb) ... Wähle vormals abgewähltes Paket automake. Entpacke automake (aus .../automake_1%3a1.11-1_all.deb) ... Wähle vormals abgewähltes Paket update-inetd. Entpacke update-inetd (aus .../update-inetd_4.31_all.deb) ... Wähle vormals abgewähltes Paket cvs. Entpacke cvs (aus .../cvs_1%3a1.12.13-12ubuntu1_amd64.deb) ... Verarbeite Trigger für install-info ... Verarbeite Trigger für man-db ... Richte xbmc-live ein (1:9.11-karmic1) ... update-rc.d: warning: /etc/init.d/xbmc-live missing LSB information update-rc.d: see start: Job failed to start invoke-rc.d: initscript xbmc-live, action "start" failed. dpkg: Fehler beim Bearbeiten von xbmc-live (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück Richte m4 ein (1.4.13-2) ... Richte autoconf ein (2.64-1ubuntu1) ... Ignoring install-info called from maintainer script The package autoconf should be rebuild with new debhelper to get trigger support Ignoring install-info called from maintainer script The package autoconf should be rebuild with new debhelper to get trigger support Ignoring install-info called from maintainer script The package autoconf should be rebuild with new debhelper to get trigger support Richte autotools-dev ein (20090427.1) ... Richte automake ein (1:1.11-1) ... update-alternatives: Verwende /usr/bin/automake-1.11, um /usr/bin/automake (automake) in Auto-Modus bereitzustellen. Richte update-inetd ein (4.31) ... Richte cvs ein (1:1.12.13-12ubuntu1) ... Ignoring install-info called from maintainer script The package cvs should be rebuild with new debhelper to get trigger support Ignoring install-info called from maintainer script The package cvs should be rebuild with new debhelper to get trigger support Fehler traten auf beim Bearbeiten von: xbmc-live E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Richte xbmc-live ein (1:9.11-karmic1) ... update-rc.d: warning: /etc/init.d/xbmc-live missing LSB information update-rc.d: see start: Job failed to start invoke-rc.d: initscript xbmc-live, action "start" failed. dpkg: Fehler beim Bearbeiten von xbmc-live (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück Fehler traten auf beim Bearbeiten von: xbmc-live Paketlisten werden gelesen... Abhängigkeitsbaum wird aufgebaut... Lese Status-Informationen ein... Reading extended state information... Initializing package states... Writing extended state information... cvs checkout: CVS password file /root/.cvspass does not exist - creating a new file cvs checkout: Updating nvclock U nvclock/.cvsignore U nvclock/ABOUT U nvclock/AUTHORS U nvclock/COPYING U nvclock/ChangeLog U nvclock/FAQ U nvclock/INSTALL U nvclock/Makefile.in U nvclock/NEWS U nvclock/README U nvclock/acinclude.m4 U nvclock/autogen.sh U nvclock/config.h.in U nvclock/configure U nvclock/configure.in U nvclock/install-sh U nvclock/nvclock.1 U nvclock/nvclock.desktop U nvclock/nvclock.png cvs checkout: Updating nvclock/src U nvclock/src/.cvsignore U nvclock/src/Makefile.in U nvclock/src/nvclock.c U nvclock/src/smartdimmer.c cvs checkout: Updating nvclock/src/backend U nvclock/src/backend/Makefile U nvclock/src/backend/Makefile.in U nvclock/src/backend/adt7473.c U nvclock/src/backend/back_bsd.c U nvclock/src/backend/back_linux.c U nvclock/src/backend/back_solaris.c U nvclock/src/backend/back_win32.c U nvclock/src/backend/backend.c U nvclock/src/backend/backend.h U nvclock/src/backend/bios.c U nvclock/src/backend/config.c U nvclock/src/backend/error.c U nvclock/src/backend/f75375.c U nvclock/src/backend/f75375.h U nvclock/src/backend/i2c.c U nvclock/src/backend/i2c.h U nvclock/src/backend/info.c U nvclock/src/backend/libc_wrapper.c U nvclock/src/backend/lm99.c U nvclock/src/backend/nv30.c U nvclock/src/backend/nv40.c U nvclock/src/backend/nv50.c U nvclock/src/backend/nvclock.h U nvclock/src/backend/nvcontrol.c U nvclock/src/backend/nvreg.h U nvclock/src/backend/overclock.c U nvclock/src/backend/utils.c U nvclock/src/backend/w83781d.c U nvclock/src/backend/w83l785r.c U nvclock/src/backend/xf86i2c.c U nvclock/src/backend/xf86i2c.h U nvclock/src/backend/xfree.h cvs checkout: Updating nvclock/src/gtk U nvclock/src/gtk/.cvsignore U nvclock/src/gtk/Makefile.in U nvclock/src/gtk/banner.c U nvclock/src/gtk/banner.h U nvclock/src/gtk/banner_gl.h U nvclock/src/gtk/banner_hw.h U nvclock/src/gtk/gl.c U nvclock/src/gtk/gl.h U nvclock/src/gtk/hw.c U nvclock/src/gtk/hw.h U nvclock/src/gtk/interface.h U nvclock/src/gtk/main.c U nvclock/src/gtk/settings.c U nvclock/src/gtk/settings.h cvs checkout: Updating nvclock/src/nvcontrol U nvclock/src/nvcontrol/Makefile.in U nvclock/src/nvcontrol/libnvcontrol.c U nvclock/src/nvcontrol/libnvcontrol.h U nvclock/src/nvcontrol/nvcontrol.c U nvclock/src/nvcontrol/nvcontrol.h cvs checkout: Updating nvclock/src/qt U nvclock/src/qt/.cvsignore U nvclock/src/qt/Makefile.in U nvclock/src/qt/links.xpm U nvclock/src/qt/main.cpp U nvclock/src/qt/nv.xpm U nvclock/src/qt/people.xpm U nvclock/src/qt/qt_nvclock.cpp U nvclock/src/qt/qt_nvclock.h U nvclock/src/qt/qt_nvclock.pro U nvclock/src/qt/qt_xfree.cpp U nvclock/src/qt/qt_xfree.h U nvclock/src/qt/x.xpm checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking for a BSD-compatible install... /usr/bin/install -c checking whether make sets $(MAKE)... yes checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for library containing getopt_long... none required checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking getopt.h usability... yes checking getopt.h presence... yes checking for getopt.h... yes checking for pkg-config... /usr/bin/pkg-config checking for gtk+-2.0 >= 2.4.0... configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/backend/Makefile config.status: creating src/nvcontrol/Makefile config.status: creating src/qt/Makefile config.status: creating src/gtk/Makefile config.status: creating Makefile config.status: WARNING: 'Makefile.in' seems to ignore the --datarootdir setting config.status: creating config.h config.status: executing default-1 commands NVClock build summary: ---------------------- - Commandline version enabled - NV-CONROL support disabled - GTK2 GUI disabled - QT GUI disabled make -C src all make[1]: Entering directory `/usr/local/src/nvclock/src' make[2]: Entering directory `/usr/local/src/nvclock/src/backend' gcc -O0 -I../.. -I../nvcontrol -c -o backend.o backend.c gcc -O0 -I../.. -I../nvcontrol -c -o bios.o bios.c gcc -O0 -I../.. -I../nvcontrol -c -o config.o config.c gcc -O0 -I../.. -I../nvcontrol -c -o error.o error.c gcc -O0 -I../.. -I../nvcontrol -c -o nv30.o nv30.c gcc -O0 -I../.. -I../nvcontrol -c -o nv40.o nv40.c gcc -O0 -I../.. -I../nvcontrol -c -o nv50.o nv50.c gcc -O0 -I../.. -I../nvcontrol -c -o info.o info.c gcc -O0 -I../.. -I../nvcontrol -c -o overclock.o overclock.c gcc -O0 -I../.. -I../nvcontrol -c -o utils.o utils.c gcc -O0 -I../.. -I../nvcontrol -c -o i2c.o i2c.c gcc -O0 -I../.. -I../nvcontrol -c -o xf86i2c.o xf86i2c.c gcc -O0 -I../.. -I../nvcontrol -c -o adt7473.o adt7473.c gcc -O0 -I../.. -I../nvcontrol -c -o f75375.o f75375.c gcc -O0 -I../.. -I../nvcontrol -c -o lm99.o lm99.c gcc -O0 -I../.. -I../nvcontrol -c -o w83781d.o w83781d.c gcc -O0 -I../.. -I../nvcontrol -c -o w83l785r.o w83l785r.c gcc -O0 -I../.. -I../nvcontrol -c -o libc_wrapper.o libc_wrapper.c gcc -O0 -I../.. -I../nvcontrol -c -o back_linux.o back_linux.c ar cru libbackend.a backend.o bios.o config.o error.o nv30.o nv40.o nv50.o info.o overclock.o utils.o i2c.o xf86i2c.o adt7473.o f75375.o lm99.o w83781d.o w83l785r.o libc_wrapper.o back_linux.o ranlib libbackend.a make[2]: Leaving directory `/usr/local/src/nvclock/src/backend' make[2]: Entering directory `/usr/local/src/nvclock/src/nvcontrol' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/usr/local/src/nvclock/src/nvcontrol' make[2]: Entering directory `/usr/local/src/nvclock/src/gtk' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/usr/local/src/nvclock/src/gtk' make[2]: Entering directory `/usr/local/src/nvclock/src/qt' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/usr/local/src/nvclock/src/qt' gcc -g -O2 -o nvclock nvclock.c -I./backend -I./nvcontrol -I.. -L./backend -lbackend gcc -g -O2 -o smartdimmer smartdimmer.c -I./backend -I./nvcontrol -I.. -L./backend -lbackend make[1]: Leaving directory `/usr/local/src/nvclock/src' installing ABOUT as /usr/local/share/doc//ABOUT installing AUTHORS as /usr/local/share/doc//AUTHORS installing ChangeLog as /usr/local/share/doc//ChangeLog installing FAQ as /usr/local/share/doc//FAQ installing README as /usr/local/share/doc//README mkdir -p /usr/local/share/man/man1 cp nvclock.1 /usr/local/share/man/man1 mkdir -p /usr/local/share/applications mkdir -p /usr/local/share/icons/hicolor/48x48/apps cp nvclock.desktop /usr/local/share/applications cp nvclock.png /usr/local/share/icons/hicolor/48x48/apps make -C src install make[1]: Entering directory `/usr/local/src/nvclock/src' make[2]: Entering directory `/usr/local/src/nvclock/src/backend' make[2]: Nothing to be done for `install'. make[2]: Leaving directory `/usr/local/src/nvclock/src/backend' make[2]: Entering directory `/usr/local/src/nvclock/src/nvcontrol' make[2]: Nothing to be done for `install'. make[2]: Leaving directory `/usr/local/src/nvclock/src/nvcontrol' make[2]: Entering directory `/usr/local/src/nvclock/src/gtk' make[2]: Nothing to be done for `install'. make[2]: Leaving directory `/usr/local/src/nvclock/src/gtk' make[2]: Entering directory `/usr/local/src/nvclock/src/qt' make[2]: Nothing to be done for `install'. make[2]: Leaving directory `/usr/local/src/nvclock/src/qt' mkdir -p /usr/local/bin /usr/bin/install -c -c nvclock /usr/local/bin/nvclock /usr/bin/install -c -c smartdimmer /usr/local/bin/smartdimmer make[1]: Leaving directory `/usr/local/src/nvclock/src' --2010-03-21 18:04:03-- http://dl.dropbox.com/u/4953107/XCI/TempSensors/hddtemp.input Resolving dl.dropbox.com... 174.129.33.164, 75.101.129.115, 75.101.142.97, ... Connecting to dl.dropbox.com|174.129.33.164|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 283 [application/octet-stream] Saving to: `hddtemp.input' 0K 100% 8,77M=0s 2010-03-21 18:04:03 (8,77 MB/s) - `hddtemp.input' saved [283/283] --2010-03-21 18:05:01-- http://dl.dropbox.com/u/4953107/XCI/TempSensors/advancedsettings-coretemp Resolving dl.dropbox.com... 174.129.33.164, 75.101.129.115, 75.101.142.97, ... Connecting to dl.dropbox.com|174.129.33.164|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 434 [application/octet-stream] Saving to: `advancedsettings-coretemp' 0K 100% 10,1M=0s 2010-03-21 18:05:01 (10,1 MB/s) - `advancedsettings-coretemp' saved [434/434] stop: Unknown instance: start: Job failed to start