Linux version 2.6.32.10 (root@pc) (gcc version 4.4.3 (Debian 4.4.3-4) ) #29 SMP PREEMPT Tue Mar 23 12:54:56 CET 2010 Command line: root=/dev/sda1 selinux=0 xen-pciback.hide=(03:00.0)(00:1d.0) physdev_dom0_hide=(03:00.0)(00:1d.0) xen-pciback.permissive KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000008f000 (usable) Xen: 000000000008f000 - 0000000000090000 (reserved) Xen: 0000000000090000 - 000000000009d000 (usable) Xen: 000000000009d000 - 0000000000100000 (reserved) Xen: 0000000000100000 - 00000000bf4bd000 (usable) Xen: 00000000bf4bd000 - 00000000bf4bf000 (reserved) Xen: 00000000bf4bf000 - 00000000bf552000 (usable) Xen: 00000000bf552000 - 00000000bf7bf000 (ACPI NVS) Xen: 00000000bf7bf000 - 00000000bf7df000 (usable) Xen: 00000000bf7df000 - 00000000bf7ff000 (ACPI data) Xen: 00000000bf7ff000 - 00000000bf800000 (usable) Xen: 00000000bf800000 - 00000000c0000000 (reserved) Xen: 00000000f8000000 - 00000000fd000000 (reserved) Xen: 00000000fec00000 - 00000000fec01000 (reserved) Xen: 00000000fee00000 - 00000000fee01000 (reserved) Xen: 00000000ffe00000 - 0000000100000000 (reserved) Xen: 0000000100000000 - 00000001f03ad000 (usable) DMI 2.5 present. last_pfn = 0x1f03ad max_arch_pfn = 0x400000000 last_pfn = 0xbf800 max_arch_pfn = 0x400000000 e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000001000 (usable) modified: 0000000000001000 - 0000000000006000 (reserved) modified: 0000000000006000 - 000000000008f000 (usable) modified: 000000000008f000 - 0000000000090000 (reserved) modified: 0000000000090000 - 000000000009d000 (usable) modified: 000000000009d000 - 0000000000100000 (reserved) modified: 0000000000100000 - 00000000bf4bd000 (usable) modified: 00000000bf4bd000 - 00000000bf4bf000 (reserved) modified: 00000000bf4bf000 - 00000000bf552000 (usable) modified: 00000000bf552000 - 00000000bf7bf000 (ACPI NVS) modified: 00000000bf7bf000 - 00000000bf7df000 (usable) modified: 00000000bf7df000 - 00000000bf7ff000 (ACPI data) modified: 00000000bf7ff000 - 00000000bf800000 (usable) modified: 00000000bf800000 - 00000000c0000000 (reserved) modified: 00000000f8000000 - 00000000fd000000 (reserved) modified: 00000000fec00000 - 00000000fec01000 (reserved) modified: 00000000fee00000 - 00000000fee01000 (reserved) modified: 00000000ffe00000 - 0000000100000000 (reserved) modified: 0000000100000000 - 00000001f03ad000 (usable) initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bf800000 0000000000 - 00bf800000 page 4k kernel direct mapping tables up to bf800000 @ 100000-700000 init_memory_mapping: 0000000100000000-00000001f03ad000 0100000000 - 01f03ad000 page 4k kernel direct mapping tables up to 1f03ad000 @ 3397000-4322000 RAMDISK: 01778000 - 023f5000 ACPI: RSDP 00000000000fe020 00024 (v02 INTEL ) ACPI: XSDT 00000000bf7fe120 00074 (v01 INTEL DX58SO 0000139C 01000013) ACPI: FACP 00000000bf7fd000 000F4 (v03 INTEL DX58SO 0000139C MSFT 0100000D) ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000450/0 (20090903/tbfadt-557) ACPI Warning: Invalid length for Pm2ControlBlock: 0, using default 8 (20090903/tbfadt-607) ACPI: DSDT 00000000bf7f8000 04641 (v02 INTEL DX58SO 0000139C MSFT 0100000D) ACPI: FACS 00000000bf727000 00040 ACPI: APIC 00000000bf7f7000 00138 (v02 INTEL DX58SO 0000139C MSFT 0100000D) ACPI: WDDT 00000000bf7f6000 00040 (v01 INTEL DX58SO 0000139C MSFT 0100000D) ACPI: MCFG 00000000bf7f5000 0003C (v01 INTEL DX58SO 0000139C MSFT 0100000D) ACPI: ASF! 00000000bf7f4000 000AC (v32 INTEL DX58SO 0000139C MSFT 0100000D) ACPI: HPET 00000000bf7f3000 00038 (v01 INTEL DX58SO 0000139C MSFT 0100000D) ACPI: SSDT 00000000bf7e2000 0E134 (v01 INTEL SSDT PM 0000139C MSFT 0100000D) ACPI: 00000000bf7df000 00128 (v01 INTEL DX58SO 0000139C MSFT 0100000D) ACPI: WDTT 00000000bf7f1000 0020C (v02 INTEL DX58SO 0000139C MSFT 0100000D) ACPI: ASPT 00000000bf7f2000 00034 (v04 INTEL PerfTune 0000139C MSFT 0100000D) ACPI: Local APIC address 0xfee00000 (9 early reservations) ==> bootmem [0000000000 - 01f03ad000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0003378000 - 0003397000] XEN PAGETABLES ==> [0003378000 - 0003397000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #3 [0001000000 - 0001757a0c] TEXT DATA BSS ==> [0001000000 - 0001757a0c] #4 [0001778000 - 00023f5000] RAMDISK ==> [0001778000 - 00023f5000] #5 [00023f5000 - 0003378000] XEN START INFO ==> [00023f5000 - 0003378000] #6 [0001758000 - 000175810d] BRK ==> [0001758000 - 000175810d] #7 [0000100000 - 00006de000] PGTABLE ==> [0000100000 - 00006de000] #8 [0003397000 - 0003b1d000] PGTABLE ==> [0003397000 - 0003b1d000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x001f03ad Movable zone start PFN for each node early_node_map[8] active PFN ranges 0: 0x00000000 -> 0x00000001 0: 0x00000006 -> 0x0000008f 0: 0x00000090 -> 0x0000009d 0: 0x00000100 -> 0x000bf4bd 0: 0x000bf4bf -> 0x000bf552 0: 0x000bf7bf -> 0x000bf7df 0: 0x000bf7ff -> 0x000bf800 0: 0x00100000 -> 0x001f03ad On node 0 totalpages: 1767605 DMA zone: 56 pages used for memmap DMA zone: 1505 pages reserved DMA zone: 2430 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 765353 pages, LIFO batch:31 Normal zone: 13453 pages used for memmap Normal zone: 970528 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] disabled) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] disabled) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] disabled) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ERROR: Unable to locate IOAPIC for GSI 2 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ERROR: Unable to locate IOAPIC for GSI 9 Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a301 base: 0xfed00000 SMP: Allowing 6 CPUs, 0 hotplug CPUs nr_irqs_gsi: 256 Allocating PCI resources starting at c0000000 (gap: c0000000:38000000) Booting paravirtualized kernel on Xen Xen version: 4.0.0-rc6 (preserve-AD) (dom0) NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1 PERCPU: Embedded 27 pages/cpu @ffff880028038000 s78104 r8192 d24296 u110592 pcpu-alloc: s78104 r8192 d24296 u110592 alloc=27*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 trying to map vcpu_info 0 at ffff880028043020, mfn 2110cf, offset 32 cpu 0 using vcpu_info at ffff880028043020 trying to map vcpu_info 1 at ffff88002805e020, mfn 2110ea, offset 32 cpu 1 using vcpu_info at ffff88002805e020 trying to map vcpu_info 2 at ffff880028079020, mfn 211105, offset 32 cpu 2 using vcpu_info at ffff880028079020 trying to map vcpu_info 3 at ffff880028094020, mfn 211120, offset 32 cpu 3 using vcpu_info at ffff880028094020 trying to map vcpu_info 4 at ffff8800280af020, mfn 21113b, offset 32 cpu 4 using vcpu_info at ffff8800280af020 trying to map vcpu_info 5 at ffff8800280ca020, mfn 211156, offset 32 cpu 5 using vcpu_info at ffff8800280ca020 Xen: using vcpu_info placement Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1738311 Kernel command line: root=/dev/sda1 selinux=0 xen-pciback.hide=(03:00.0)(00:1d.0) physdev_dom0_hide=(03:00.0)(00:1d.0) xen-pciback.permissive PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Initializing CPU#0 DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 DMA: software IO TLB at phys 0x20000000 - 0x24000000 xen_swiotlb_fixup: buf=ffff880020000000 size=67108864 xen_swiotlb_fixup: buf=ffff880024060000 size=32768 Memory: 6841552k/8130228k available (4366k kernel code, 1059808k absent, 227960k reserved, 1948k data, 476k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:1536 xen: registering gsi 0 triggering 1 polarity 0 xen: --> irq=0 Already setup the GSI :0 xen: registering gsi 1 triggering 1 polarity 0 xen: --> irq=1 Already setup the GSI :1 xen: registering gsi 2 triggering 1 polarity 0 xen: --> irq=2 Already setup the GSI :2 xen: registering gsi 3 triggering 1 polarity 0 xen: --> irq=3 Already setup the GSI :3 xen: registering gsi 4 triggering 1 polarity 0 xen: --> irq=4 Already setup the GSI :4 xen: registering gsi 5 triggering 1 polarity 0 xen: --> irq=5 Already setup the GSI :5 xen: registering gsi 6 triggering 1 polarity 0 xen: --> irq=6 Already setup the GSI :6 xen: registering gsi 7 triggering 1 polarity 0 xen: --> irq=7 Already setup the GSI :7 xen: registering gsi 8 triggering 1 polarity 0 xen: --> irq=8 Already setup the GSI :8 xen: registering gsi 9 triggering 1 polarity 0 xen: --> irq=9 Already setup the GSI :9 xen: registering gsi 10 triggering 1 polarity 0 xen: --> irq=10 Already setup the GSI :10 xen: registering gsi 11 triggering 1 polarity 0 xen: --> irq=11 Already setup the GSI :11 xen: registering gsi 12 triggering 1 polarity 0 xen: --> irq=12 Already setup the GSI :12 xen: registering gsi 13 triggering 1 polarity 0 xen: --> irq=13 Already setup the GSI :13 xen: registering gsi 14 triggering 1 polarity 0 xen: --> irq=14 Already setup the GSI :14 xen: registering gsi 15 triggering 1 polarity 0 xen: --> irq=15 Already setup the GSI :15 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 xen: registering gsi 9 triggering 0 polarity 0 xen_allocate_pirq: returning irq 9 for gsi 9 xen: --> irq=9 Already setup the GSI :9 xen: acpi sci 9 Console: colour VGA+ 80x25 console [tty0] enabled Xen: using vcpuop timer interface installing Xen timer for CPU 0 alloc irq_desc for 1535 on node 0 alloc kstat_irqs on node 0 Detected 2702.612 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5405.22 BogoMIPS (lpj=2702612) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU: Unsupported number of siblings 16 SMP alternatives: switching to UP code ACPI: Core revision 20090903 alloc irq_desc for 1534 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1533 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1532 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1531 on node 0 alloc kstat_irqs on node 0 installing Xen timer for CPU 1 alloc irq_desc for 1530 on node 0 alloc kstat_irqs on node 0 SMP alternatives: switching to SMP code alloc irq_desc for 1529 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1528 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1527 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1526 on node 0 alloc kstat_irqs on node 0 Initializing CPU#1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU: Unsupported number of siblings 16 installing Xen timer for CPU 2 alloc irq_desc for 1525 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1524 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1523 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1522 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1521 on node 0 alloc kstat_irqs on node 0 Initializing CPU#2 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU: Unsupported number of siblings 16 installing Xen timer for CPU 3 alloc irq_desc for 1520 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1519 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1518 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1517 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1516 on node 0 alloc kstat_irqs on node 0 Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU: Unsupported number of siblings 16 installing Xen timer for CPU 4 alloc irq_desc for 1515 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1514 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1513 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1512 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1511 on node 0 alloc kstat_irqs on node 0 Initializing CPU#4 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU: Unsupported number of siblings 16 installing Xen timer for CPU 5 alloc irq_desc for 1510 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1509 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1508 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1507 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1506 on node 0 alloc kstat_irqs on node 0 Initializing CPU#5 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU: Unsupported number of siblings 16 Brought up 6 CPUs Grant table initialized regulator: core version 0.5 NET: Registered protocol family 16 alloc irq_desc for 1505 on node 0 alloc kstat_irqs on node 0 xenbus_probe_init ok ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in E820 PCI: Using MMCONFIG at f8000000 - fbffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ERROR: Unable to locate IOAPIC for GSI 9 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI Warning: Incorrect checksum in table [ ] - 48, should be 8C (20090903/tbutils-314) ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:19.0: reg 10 32bit mmio: [0xc7200000-0xc721ffff] pci 0000:00:19.0: reg 14 32bit mmio: [0xc7223000-0xc7223fff] pci 0000:00:19.0: reg 18 io port: [0x5100-0x511f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x50e0-0x50ff] pci 0000:00:1a.1: reg 20 io port: [0x50c0-0x50df] pci 0000:00:1a.2: reg 20 io port: [0x50a0-0x50bf] pci 0000:00:1a.7: reg 10 32bit mmio: [0xc7222000-0xc72223ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x5080-0x509f] pci 0000:00:1d.1: reg 20 io port: [0x5060-0x507f] pci 0000:00:1d.2: reg 20 io port: [0x5040-0x505f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xc7221000-0xc72213ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810 (mask 007f) pci 0000:00:1f.2: reg 10 io port: [0x5128-0x512f] pci 0000:00:1f.2: reg 14 io port: [0x5134-0x5137] pci 0000:00:1f.2: reg 18 io port: [0x5120-0x5127] pci 0000:00:1f.2: reg 1c io port: [0x5130-0x5133] pci 0000:00:1f.2: reg 20 io port: [0x5020-0x503f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xc7220000-0xc72207ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0xf0000000-0xf00000ff] pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f] pci 0000:02:00.0: reg 10 32bit mmio: [0xc6000000-0xc6ffffff] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:02:00.0: reg 1c 64bit mmio: [0xc4000000-0xc5ffffff] pci 0000:02:00.0: reg 24 io port: [0x4000-0x407f] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfff80000-0xffffffff] pci 0000:00:03.0: bridge io port: [0x4000-0x4fff] pci 0000:00:03.0: bridge 32bit mmio: [0xc4000000-0xc6ffffff] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:03:00.0: reg 10 32bit mmio: [0xc2000000-0xc2ffffff] pci 0000:03:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff] pci 0000:03:00.0: reg 1c 64bit mmio: [0xc0000000-0xc1ffffff] pci 0000:03:00.0: reg 24 io port: [0x3000-0x307f] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfff80000-0xffffffff] pci 0000:00:07.0: bridge io port: [0x3000-0x3fff] pci 0000:00:07.0: bridge 32bit mmio: [0xc0000000-0xc2ffffff] pci 0000:00:07.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] pci 0000:06:00.0: reg 10 io port: [0x2018-0x201f] pci 0000:06:00.0: reg 14 io port: [0x2024-0x2027] pci 0000:06:00.0: reg 18 io port: [0x2010-0x2017] pci 0000:06:00.0: reg 1c io port: [0x2020-0x2023] pci 0000:06:00.0: reg 20 io port: [0x2000-0x200f] pci 0000:06:00.0: reg 24 32bit mmio: [0xc7100000-0xc71003ff] pci 0000:06:00.0: supports D1 pci 0000:06:00.0: PME# supported from D0 D1 D3hot pci 0000:06:00.0: PME# disabled pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.4: bridge io port: [0x2000-0x2fff] pci 0000:00:1c.4: bridge 32bit mmio: [0xc7100000-0xc71fffff] pci 0000:07:02.0: reg 10 io port: [0x1000-0x103f] pci 0000:07:02.0: supports D1 D2 pci 0000:07:02.1: reg 10 io port: [0x1040-0x1047] pci 0000:07:02.1: supports D1 D2 pci 0000:07:02.2: reg 10 32bit mmio: [0xc7004000-0xc70047ff] pci 0000:07:02.2: reg 14 32bit mmio: [0xc7000000-0xc7003fff] pci 0000:07:02.2: supports D1 D2 pci 0000:07:02.2: PME# supported from D0 D1 D2 D3hot pci 0000:07:02.2: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0x1000-0x1fff] pci 0000:00:1e.0: bridge 32bit mmio: [0xc7000000-0xc70fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) xenbus_probe_backend_init bus registered ok xenbus_probe_frontend_init bus registered ok xen_balloon: Initialising balloon driver with page order 0. vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=none,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing Switching to clocksource xen pnp: PnP ACPI init ACPI: bus type pnp registered xen: registering gsi 8 triggering 1 polarity 0 xen_allocate_pirq: returning irq 8 for gsi 8 xen: --> irq=8 Already setup the GSI :8 xen: registering gsi 13 triggering 1 polarity 0 xen_allocate_pirq: returning irq 13 for gsi 13 xen: --> irq=13 Already setup the GSI :13 pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered system 00:05: ioport range 0x500-0x53f has been reserved system 00:05: ioport range 0x400-0x47f has been reserved system 00:05: ioport range 0x680-0x6ff has been reserved pciback 0000:00:1d.0: seizing device pciback 0000:03:00.0: seizing device PM-Timer failed consistency check (0x0xffffff) - aborting. pci 0000:02:00.0: BAR 6: no parent found for of device [0xfff80000-0xffffffff] pciback 0000:03:00.0: BAR 6: no parent found for of device [0xfff80000-0xffffffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: disabled pci 0000:00:01.0: PREFETCH window: disabled pci 0000:02:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02 pci 0000:00:03.0: IO window: 0x4000-0x4fff pci 0000:00:03.0: MEM window: 0xc4000000-0xc6ffffff pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pciback 0000:03:00.0: BAR 6: can't allocate mem resource [0xf0000000-0xefffffff] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03 pci 0000:00:07.0: IO window: 0x3000-0x3fff pci 0000:00:07.0: MEM window: 0xc0000000-0xc2ffffff pci 0000:00:07.0: PREFETCH window: 0x000000e0000000-0x000000efffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: disabled pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06 pci 0000:00:1c.4: IO window: 0x2000-0x2fff pci 0000:00:1c.4: MEM window: 0xc7100000-0xc71fffff pci 0000:00:1c.4: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07 pci 0000:00:1e.0: IO window: 0x1000-0x1fff pci 0000:00:1e.0: MEM window: 0xc7000000-0xc70fffff pci 0000:00:1e.0: PREFETCH window: disabled xen: registering gsi 16 triggering 0 polarity 1 alloc irq_desc for 16 on node 0 alloc kstat_irqs on node 0 xen: --> irq=16 pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:03.0: setting latency timer to 64 xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:07.0: setting latency timer to 64 xen: registering gsi 17 triggering 0 polarity 1 alloc irq_desc for 17 on node 0 alloc kstat_irqs on node 0 xen: --> irq=17 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 xen: registering gsi 17 triggering 0 polarity 1 xen_allocate_pirq: returning irq 17 for gsi 17 xen: --> irq=17 Already setup the GSI :17 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:02: resource 0 io: [0x4000-0x4fff] pci_bus 0000:02: resource 1 mem: [0xc4000000-0xc6ffffff] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] pci_bus 0000:03: resource 1 mem: [0xc0000000-0xc2ffffff] pci_bus 0000:03: resource 2 pref mem [0xe0000000-0xefffffff] pci_bus 0000:06: resource 0 io: [0x2000-0x2fff] pci_bus 0000:06: resource 1 mem: [0xc7100000-0xc71fffff] pci_bus 0000:07: resource 0 io: [0x1000-0x1fff] pci_bus 0000:07: resource 1 mem: [0xc7000000-0xc70fffff] pci_bus 0000:07: resource 3 io: [0x00-0xffff] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:02:00.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 12788k freed PCI-DMA: Using software bounce buffering for IO (SWIOTLB) DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 DMA: software IO TLB at phys 0x20000000 - 0x24000000 Scanning for low memory corruption every 60 seconds HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Slow work thread pool: Starting up Slow work thread pool: Ready msgmni has been set to 13389 alg: No test for stdrng (krng) io scheduler noop registered io scheduler cfq registered (default) alloc irq_desc for 1504 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:01.0: setting latency timer to 64 alloc irq_desc for 1503 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:03.0: setting latency timer to 64 alloc irq_desc for 1502 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:07.0: setting latency timer to 64 alloc irq_desc for 1501 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 1500 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 1499 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:1c.4: setting latency timer to 64 aer 0000:00:01.0:pcie02: service driver aer loaded aer 0000:00:03.0:pcie02: service driver aer loaded aer 0000:00:07.0:pcie02: service driver aer loaded pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 pci-stub: invalid id string "" input: Sleep Button as /class/input/input0 ACPI: Sleep Button [SLPB] input: Power Button as /class/input/input1 ACPI: Power Button [PWRF] Event-channel device installed. pciback 0000:03:00.0: enabling device (0000 -> 0003) xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 pciback 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pciback 0000:03:00.0: PCI INT A disabled xen: registering gsi 23 triggering 0 polarity 1 alloc irq_desc for 23 on node 0 alloc kstat_irqs on node 0 xen: --> irq=23 pciback 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 pciback 0000:00:1d.0: PCI INT A disabled blktap_device_init: blktap device major 253 blktap_ring_init: blktap ring major: 253 registering netback alloc irq_desc for 1498 on node 0 alloc kstat_irqs on node 0 hpet_acpi_add: no address or irqs in _CRS brd: module loaded loop: module loaded ahci 0000:00:1f.2: version 3.0 xen: registering gsi 19 triggering 0 polarity 1 alloc irq_desc for 19 on node 0 alloc kstat_irqs on node 0 xen: --> irq=19 ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 alloc irq_desc for 1497 on node 0 alloc kstat_irqs on node 0 ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xc7220000 port 0xc7220100 irq 1497 ata2: SATA max UDMA/133 abar m2048@0xc7220000 port 0xc7220180 irq 1497 ata3: SATA max UDMA/133 abar m2048@0xc7220000 port 0xc7220200 irq 1497 ata4: SATA max UDMA/133 abar m2048@0xc7220000 port 0xc7220280 irq 1497 ata5: SATA max UDMA/133 abar m2048@0xc7220000 port 0xc7220300 irq 1497 ata6: SATA max UDMA/133 abar m2048@0xc7220000 port 0xc7220380 irq 1497 xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 ahci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ahci 0000:06:00.0: controller can't do NCQ, turning off CAP_NCQ ahci 0000:06:00.0: controller can't do PMP, turning off CAP_PMP ahci 0000:06:00.0: MV_AHCI HACK: port_map 7 -> 3 ahci 0000:06:00.0: Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this. ahci: SSS flag set, parallel bus scan disabled ahci 0000:06:00.0: AHCI 0001.0000 32 slots 3 ports 3 Gbps 0x3 impl IDE mode ahci 0000:06:00.0: flags: 64bit stag led slum part ahci 0000:06:00.0: setting latency timer to 64 scsi6 : ahci scsi7 : ahci scsi8 : ahci ata7: SATA max UDMA/133 abar m1024@0xc7100000 port 0xc7100100 irq 16 ata8: SATA max UDMA/133 abar m1024@0xc7100000 port 0xc7100180 irq 16 ata9: DUMMY Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI Copyright (c) 1999-2006 Intel Corporation. e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. xen: registering gsi 20 triggering 0 polarity 1 alloc irq_desc for 20 on node 0 alloc kstat_irqs on node 0 xen: --> irq=20 e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 alloc irq_desc for 1496 on node 0 alloc kstat_irqs on node 0 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:93:43:82 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: ffffff-0ff tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky usbcore: registered new interface driver cytherm cytherm: v1.0:Cypress USB Thermometer driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ctnetlink v0.93: registering with nfnetlink. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 registered taskstats version 1 rtc_cmos 00:02: setting system clock to 2010-03-23 15:38:12 UTC (1269358692) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: INTEL SSDSA2M160G2GC, 2CV102HA, max UDMA/133 ata1.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata6: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata7: SATA link down (SStatus 0 SControl 300) ata4.00: ATA-7: WDC WD2500JS-19MHB0, 02.01C03, max UDMA/133 ata4.00: 488397168 sectors, multi 0: LBA48 ata2.00: ATAPI: SAMSUNG DVDWBD SH-B083L, SB00, max UDMA/100, ATAPI AN ata3.00: ATA-7: ST3250410AS, 3.AAB, max UDMA/133 ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata4.00: configured for UDMA/133 ata3.00: configured for UDMA/133 ata2.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M160 2CV1 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: CD-ROM SAMSUNG DVDWBD SH-B083L SB00 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 102x/102x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 scsi 2:0:0:0: Direct-Access ATA ST3250410AS 3.AA PQ: 0 ANSI: 5 sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: scsi 3:0:0:0: Direct-Access ATA WDC WD2500JS-19M 02.0 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 3:0:0:0: Attached scsi generic sg3 type 0 sd 3:0:0:0: [sdc] Write Protect is off sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdb1 sd 2:0:0:0: [sdb] Attached SCSI disk sdc1 sd 3:0:0:0: [sdc] Attached SCSI disk ata8: SATA link down (SStatus 0 SControl 300) Freeing unused kernel memory: 476k freed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver xen: registering gsi 18 triggering 0 polarity 1 alloc irq_desc for 18 on node 0 alloc kstat_irqs on node 0 xen: --> irq=18 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xc7222000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected xen: registering gsi 23 triggering 0 polarity 1 xen_allocate_pirq: returning irq 23 for gsi 23 xen: --> irq=23 Already setup the GSI :23 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xc7221000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x000050e0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected xen: registering gsi 21 triggering 0 polarity 1 alloc irq_desc for 21 on node 0 alloc kstat_irqs on node 0 xen: --> irq=21 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050c0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected xen: registering gsi 19 triggering 0 polarity 1 xen_allocate_pirq: returning irq 19 for gsi 19 xen: --> irq=19 Already setup the GSI :19 uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 19, io base 0x000050a0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected xen: registering gsi 19 triggering 0 polarity 1 xen_allocate_pirq: returning irq 19 for gsi 19 xen: --> irq=19 Already setup the GSI :19 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005060 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected xen: registering gsi 18 triggering 0 polarity 1 xen_allocate_pirq: returning irq 18 for gsi 18 xen: --> irq=18 Already setup the GSI :18 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb 1-2: new high speed USB device using ehci_hcd and address 2 usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected EXT4-fs (sda1): mounted filesystem with ordered data mode usb 1-6: new high speed USB device using ehci_hcd and address 4 pci-stub 0000:03:00.0: claimed by stub pci-stub 0000:00:1d.0: claimed by stub udev: starting version 151 usb 1-6: configuration #1 chosen from 1 choice Linux video capture interface: v2.00 usbcore: registered new interface driver snd-usb-audio usb 2-3: new high speed USB device using ehci_hcd and address 2 xen: registering gsi 18 triggering 0 polarity 1 xen_allocate_pirq: returning irq 18 for gsi 18 xen: --> irq=18 Already setup the GSI :18 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 uvcvideo: Found UVC 1.00 device USB Video Camera (0471:2034) input: USB Video Camera as /class/input/input2 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) gameport: EMU10K1 is pci0000:07:02.1/gameport0, io 0x1040, speed 619kHz xen: registering gsi 18 triggering 0 polarity 1 xen_allocate_pirq: returning irq 18 for gsi 18 xen: --> irq=18 Already setup the GSI :18 EMU10K1_Audigy 0000:07:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Installing spdif_bug patch: SB Audigy 2 ZS [SB0350] usb 2-3: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi9 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usb 5-1: new full speed USB device using uhci_hcd and address 2 usb 5-1: configuration #1 chosen from 1 choice hub 5-1:1.0: USB hub found hub 5-1:1.0: 3 ports detected usb 6-2: new full speed USB device using uhci_hcd and address 2 Adding 1048568k swap on /.swapfile. Priority:1 extents:40 across:5668856k SS EXT4-fs (sda2): mounted filesystem without journal coretemp coretemp.0: Unable to access MSR 0xEE, for Tjmax, left at default coretemp coretemp.1: Unable to access MSR 0xEE, for Tjmax, left at default coretemp coretemp.2: Unable to access MSR 0xEE, for Tjmax, left at default coretemp coretemp.3: Unable to access MSR 0xEE, for Tjmax, left at default coretemp coretemp.4: Unable to access MSR 0xEE, for Tjmax, left at default coretemp coretemp.5: Unable to access MSR 0xEE, for Tjmax, left at default usb 6-2: configuration #1 chosen from 1 choice device tap0 entered promiscuous mode usb 7-1: new full speed USB device using uhci_hcd and address 2 usb 7-1: configuration #1 chosen from 1 choice hub 7-1:1.0: USB hub found hub 7-1:1.0: 3 ports detected usb 7-2: new low speed USB device using uhci_hcd and address 3 usb 7-2: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /class/input/input3 generic-usb 0003:046D:C03D.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-2/input0 usb 5-1.2: new full speed USB device using uhci_hcd and address 3 usb 5-1.2: configuration #1 chosen from 1 choice input: Logitech Logitech BT Mini-Receiver as /class/input/input4 generic-usb 0003:046D:C713.0002: input: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1a.2-1.2/input0 usb 5-1.3: new full speed USB device using uhci_hcd and address 4 usb 5-1.3: configuration #1 chosen from 1 choice ADDRCONF(NETDEV_UP): eth0: link is not ready device eth0 entered promiscuous mode input: Logitech Logitech BT Mini-Receiver as /class/input/input5 logitech 0003:046D:C714.0003: input: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1a.2-1.3/input0 usb 7-1.1: new full speed USB device using uhci_hcd and address 4 usb 7-1.1: configuration #1 chosen from 1 choice input: Dell Dell USB Keyboard as /class/input/input6 generic-usb 0003:413C:2010.0004: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.2-1.1/input0 input: Dell Dell USB Keyboard as /class/input/input7 generic-usb 0003:413C:2010.0005: input: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1d.2-1.1/input1 scsi 9:0:0:0: Direct-Access USB2.0 CardReader CF RW 0814 PQ: 0 ANSI: 0 sd 9:0:0:0: Attached scsi generic sg4 type 0 usb-storage: device scan complete sd 9:0:0:0: [sdd] Attached SCSI removable disk e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready br0: port 2(eth0) entering forwarding state CIFS VFS: rsize 130048 too large, using MaxBufSize fuse init (API version 7.13) alloc irq_desc for 1495 on node 0 alloc kstat_irqs on node 0 xenbus_probe wake_waiting alloc irq_desc for 1494 on node 0 alloc kstat_irqs on node 0 xenbus_probe wake_waiting XENBUS: Unable to read cpu state XENBUS: Unable to read cpu state XENBUS: Unable to read cpu state XENBUS: Unable to read cpu state XENBUS: Unable to read cpu state XENBUS: Unable to read cpu state xenbus_probe_devices backend xenbus_probe_devices failed xenbus_directory backend_probe_and_watch devices probed ok backend_probe_and_watch watch add ok ok backend_probe_and_watch all done xenbus_probe_devices device xenbus_probe_devices failed xenbus_directory frontend_probe_and_watch devices probed ok frontend_probe_and_watch watch add ok ok frontend_probe_and_watch all done br0: no IPv6 routers present Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.14 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=16 Already setup the GSI :16 nouveau 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nouveau 0000:02:00.0: setting latency timer to 64 [drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x096000c1) [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN [drm] nouveau 0000:02:00.0: ... appears to be valid [drm] nouveau 0000:02:00.0: BIT BIOS found [drm] nouveau 0000:02:00.0: Bios version 62.94.3c.00 [drm] nouveau 0000:02:00.0: TMDS table revision 2.0 not currently supported [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0 [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000028 [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 04000302 00020030 [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04011310 00000028 [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 02022332 00c200a0 [drm] nouveau 0000:02:00.0: Raw DCB entry 4: 0000000e 00000000 [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4 [drm] nouveau 0000:02:00.0: 0: 0x01000030: type 0x30 idx 0 tag 0xff [drm] nouveau 0000:02:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff [drm] nouveau 0000:02:00.0: 2: 0x00020261: type 0x61 idx 2 tag 0x52 [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD101 [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xD4F2 [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xE542 [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xE68B [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xE8F3 [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xE958 [drm] nouveau 0000:02:00.0: 0xE958: Condition still not met after 20ms, skipping following opcodes [drm] nouveau 0000:02:00.0: 0xC0CE: parsing output script 0 [drm] nouveau 0000:02:00.0: 0xC0CE: parsing output script 0 [TTM] Zone kernel: Available graphics memory: 4062024 kiB. [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [drm] nouveau 0000:02:00.0: 512 MiB VRAM [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture) [drm] nouveau 0000:02:00.0: Allocating FIFO number 1 [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 1 [drm] nouveau 0000:02:00.0: Detected a DAC output [drm] nouveau 0000:02:00.0: Detected a TMDS output [drm] nouveau 0000:02:00.0: Detected a DAC output [drm] nouveau 0000:02:00.0: Detected a TMDS output [drm] nouveau 0000:02:00.0: Detected a DVI-I connector [drm] nouveau 0000:02:00.0: Detected a VGA connector [drm] nouveau 0000:02:00.0: Detected a HDMI connector [drm] nouveau 0000:02:00.0: allocated 1920x1200 fb: 0x40250000, bo ffff8801ee51f200 fb0: nouveaufb frame buffer device registered panic notifier [drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on minor 0 vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem vgaarb: transferring owner from PCI:0000:02:00.0 to PCI:0000:03:00.0 eth0: no IPv6 routers present [drm] nouveau 0000:02:00.0: Allocating FIFO number 2 [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 2 [drm] TMDS-8: set mode 1280x1024 29 [drm] TMDS-10: set mode 1280x1024 2b [drm] nouveau 0000:02:00.0: 0xC0EC: parsing output script 1 [drm] nouveau 0000:02:00.0: 0xC0FA: parsing output script 2 [drm] nouveau 0000:02:00.0: 0xC058: parsing clock script 0 [drm] nouveau 0000:02:00.0: 0xB6E2: parsing clock script 1 [drm] nouveau 0000:02:00.0: 0xC0EC: parsing output script 1 [drm] nouveau 0000:02:00.0: 0xC0FA: parsing output script 2 [drm] nouveau 0000:02:00.0: 0xBF9E: parsing clock script 0 [drm] nouveau 0000:02:00.0: 0xB6E2: parsing clock script 1 alloc irq_desc for 1493 on node 0 alloc kstat_irqs on node 0 device vif1.0 entered promiscuous mode br0: port 3(vif1.0) entering forwarding state device tap1.0 entered promiscuous mode br0: port 4(tap1.0) entering forwarding state alloc irq_desc for 1492 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1491 on node 0 alloc kstat_irqs on node 0 BUG: scheduling while atomic: xenwatch/33/0x00000002 Modules linked in: nouveau ttm drm_kms_helper drm cfbfillrect cfbimgblt cfbcopyarea i2c_algo_bit backlight fb intel_agp agpgart sco bnep l2cap bluetooth fuse coretemp hwmon usb_storage snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_ac97_codec emu10k1_gp ac97_bus gameport uvcvideo serio_raw snd_util_mem i2c_i801 snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_usb_lib snd_hwdep snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd videodev v4l1_compat v4l2_compat_ioctl32 soundcore i2c_core uhci_hcd ehci_hcd [last unloaded: scsi_wait_scan] Pid: 33, comm: xenwatch Not tainted 2.6.32.10 #29 Call Trace: [] ? __schedule_bug+0x40/0x60 [] ? thread_return+0x291/0x714 [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? check_events+0x12/0x20 [] ? read_reply+0xad/0x150 [] ? autoremove_wake_function+0x0/0x30 [] ? xs_talkv+0xdb/0x1e0 [] ? xs_single+0x42/0x60 [] ? xenbus_read+0x3f/0x70 [] ? xenbus_gather+0xaf/0x180 [] ? vsscanf+0x32e/0x8d0 [] ? xenbus_read_driver_state+0x26/0x40 [] ? pciback_setup_backend+0x66/0x330 [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? kfree+0x8c/0xd0 [] ? xenbus_gather+0xe3/0x180 [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? _spin_unlock_irqrestore+0x10/0x40 [] ? pciback_xenbus_probe+0x10a/0x110 [] ? xenbus_dev_probe+0x7c/0x150 [] ? driver_probe_device+0x93/0x190 [] ? __device_attach+0x0/0x60 [] ? bus_for_each_drv+0x5c/0x90 [] ? device_attach+0x8c/0xa0 [] ? bus_probe_device+0x25/0x40 [] ? device_add+0x53e/0x6d0 [] ? xenbus_probe_node+0x144/0x1f0 [] ? xenbus_dev_changed+0x1c1/0x1d0 [] ? xenwatch_thread+0x9c/0x170 [] ? autoremove_wake_function+0x0/0x30 [] ? xenwatch_thread+0x0/0x170 [] ? kthread+0x8e/0xa0 [] ? child_rip+0xa/0x20 [] ? int_ret_from_sys_call+0x7/0x1b [] ? retint_restore_args+0x5/0x6 [] ? child_rip+0x0/0x20 BUG: scheduling while atomic: xenwatch/33/0x00000002 Modules linked in: nouveau ttm drm_kms_helper drm cfbfillrect cfbimgblt cfbcopyarea i2c_algo_bit backlight fb intel_agp agpgart sco bnep l2cap bluetooth fuse coretemp hwmon usb_storage snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_ac97_codec emu10k1_gp ac97_bus gameport uvcvideo serio_raw snd_util_mem i2c_i801 snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_usb_lib snd_hwdep snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd videodev v4l1_compat v4l2_compat_ioctl32 soundcore i2c_core uhci_hcd ehci_hcd [last unloaded: scsi_wait_scan] Pid: 33, comm: xenwatch Not tainted 2.6.32.10 #29 Call Trace: [] ? __schedule_bug+0x40/0x60 [] ? thread_return+0x291/0x714 [] ? xen_force_evtchn_callback+0x9/0x10 [] ? check_events+0x12/0x20 [] ? check_events+0x12/0x20 [] ? read_reply+0xad/0x150 [] ? autoremove_wake_function+0x0/0x30 [] ? xs_talkv+0xdb/0x1e0 [] ? xs_single+0x42/0x60 [] ? xenbus_read+0x3f/0x70 [] ? xenbus_scanf+0x1a/0x70 [] ? pciback_setup_backend+0xf4/0x330 [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? kfree+0x8c/0xd0 [] ? xenbus_gather+0xe3/0x180 [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? _spin_unlock_irqrestore+0x10/0x40 [] ? pciback_xenbus_probe+0x10a/0x110 [] ? xenbus_dev_probe+0x7c/0x150 [] ? driver_probe_device+0x93/0x190 [] ? __device_attach+0x0/0x60 [] ? bus_for_each_drv+0x5c/0x90 [] ? device_attach+0x8c/0xa0 [] ? bus_probe_device+0x25/0x40 [] ? device_add+0x53e/0x6d0 [] ? xenbus_probe_node+0x144/0x1f0 [] ? xenbus_dev_changed+0x1c1/0x1d0 [] ? xenwatch_thread+0x9c/0x170 [] ? autoremove_wake_function+0x0/0x30 [] ? xenwatch_thread+0x0/0x170 [] ? kthread+0x8e/0xa0 [] ? child_rip+0xa/0x20 [] ? int_ret_from_sys_call+0x7/0x1b [] ? retint_restore_args+0x5/0x6 [] ? child_rip+0x0/0x20 BUG: scheduling while atomic: xenwatch/33/0x00000002 Modules linked in: nouveau ttm drm_kms_helper drm cfbfillrect cfbimgblt cfbcopyarea i2c_algo_bit backlight fb intel_agp agpgart sco bnep l2cap bluetooth fuse coretemp hwmon usb_storage snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_ac97_codec emu10k1_gp ac97_bus gameport uvcvideo serio_raw snd_util_mem i2c_i801 snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_usb_lib snd_hwdep snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd videodev v4l1_compat v4l2_compat_ioctl32 soundcore i2c_core uhci_hcd ehci_hcd [last unloaded: scsi_wait_scan] Pid: 33, comm: xenwatch Not tainted 2.6.32.10 #29 Call Trace: [] ? __schedule_bug+0x40/0x60 [] ? thread_return+0x291/0x714 [] ? xen_force_evtchn_callback+0x9/0x10 [] ? check_events+0x12/0x20 [] ? read_reply+0xad/0x150 [] ? autoremove_wake_function+0x0/0x30 [] ? xs_talkv+0xdb/0x1e0 [] ? xs_single+0x42/0x60 [] ? xenbus_read+0x3f/0x70 [] ? xenbus_scanf+0x1a/0x70 [] ? snprintf+0x36/0x40 [] ? pciback_setup_backend+0x22d/0x330 [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? kfree+0x8c/0xd0 [] ? xenbus_gather+0xe3/0x180 [] ? _spin_unlock_irqrestore+0x10/0x40 [] ? pciback_xenbus_probe+0x10a/0x110 [] ? xenbus_dev_probe+0x7c/0x150 [] ? driver_probe_device+0x93/0x190 [] ? __device_attach+0x0/0x60 [] ? bus_for_each_drv+0x5c/0x90 [] ? device_attach+0x8c/0xa0 [] ? bus_probe_device+0x25/0x40 [] ? device_add+0x53e/0x6d0 [] ? xenbus_probe_node+0x144/0x1f0 [] ? xenbus_dev_changed+0x1c1/0x1d0 [] ? xenwatch_thread+0x9c/0x170 [] ? autoremove_wake_function+0x0/0x30 [] ? xenwatch_thread+0x0/0x170 [] ? kthread+0x8e/0xa0 [] ? child_rip+0xa/0x20 [] ? int_ret_from_sys_call+0x7/0x1b [] ? retint_restore_args+0x5/0x6 [] ? child_rip+0x0/0x20 pciback pci-1-0: 22 Couldn't locate PCI device (0000:03:00.0)! perhaps already in-use? BUG: scheduling while atomic: xenwatch/33/0x00000002 Modules linked in: nouveau ttm drm_kms_helper drm cfbfillrect cfbimgblt cfbcopyarea i2c_algo_bit backlight fb intel_agp agpgart sco bnep l2cap bluetooth fuse coretemp hwmon usb_storage snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_ac97_codec emu10k1_gp ac97_bus gameport uvcvideo serio_raw snd_util_mem i2c_i801 snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_usb_lib snd_hwdep snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd videodev v4l1_compat v4l2_compat_ioctl32 soundcore i2c_core uhci_hcd ehci_hcd [last unloaded: scsi_wait_scan] Pid: 33, comm: xenwatch Not tainted 2.6.32.10 #29 Call Trace: [] ? __schedule_bug+0x40/0x60 [] ? thread_return+0x291/0x714 [] ? check_events+0x12/0x20 [] ? read_reply+0xad/0x150 [] ? autoremove_wake_function+0x0/0x30 [] ? xs_talkv+0xdb/0x1e0 [] ? xenbus_write+0x6b/0xa0 [] ? xenbus_va_dev_error+0xe9/0x160 [] ? xenbus_dev_fatal+0x3a/0x50 [] ? pcistub_get_pci_dev_by_slot+0xa2/0xd0 [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? pciback_export_device+0x119/0x120 [] ? pciback_setup_backend+0x17d/0x330 [] ? xenbus_gather+0xe3/0x180 [] ? _spin_unlock_irqrestore+0x10/0x40 [] ? pciback_xenbus_probe+0x10a/0x110 [] ? xenbus_dev_probe+0x7c/0x150 [] ? driver_probe_device+0x93/0x190 [] ? __device_attach+0x0/0x60 [] ? bus_for_each_drv+0x5c/0x90 [] ? device_attach+0x8c/0xa0 [] ? bus_probe_device+0x25/0x40 [] ? device_add+0x53e/0x6d0 [] ? xenbus_probe_node+0x144/0x1f0 [] ? xenbus_dev_changed+0x1c1/0x1d0 [] ? xenwatch_thread+0x9c/0x170 [] ? autoremove_wake_function+0x0/0x30 [] ? xenwatch_thread+0x0/0x170 [] ? kthread+0x8e/0xa0 [] ? child_rip+0xa/0x20 [] ? int_ret_from_sys_call+0x7/0x1b [] ? retint_restore_args+0x5/0x6 [] ? child_rip+0x0/0x20 BUG: scheduling while atomic: xenwatch/33/0x00000002 Modules linked in: nouveau ttm drm_kms_helper drm cfbfillrect cfbimgblt cfbcopyarea i2c_algo_bit backlight fb intel_agp agpgart sco bnep l2cap bluetooth fuse coretemp hwmon usb_storage snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_ac97_codec emu10k1_gp ac97_bus gameport uvcvideo serio_raw snd_util_mem i2c_i801 snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_usb_lib snd_hwdep snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd videodev v4l1_compat v4l2_compat_ioctl32 soundcore i2c_core uhci_hcd ehci_hcd [last unloaded: scsi_wait_scan] Pid: 33, comm: xenwatch Not tainted 2.6.32.10 #29 Call Trace: [] ? __schedule_bug+0x40/0x60 [] ? thread_return+0x291/0x714 [] ? check_events+0x12/0x20 [] ? read_reply+0xad/0x150 [] ? autoremove_wake_function+0x0/0x30 [] ? xs_talkv+0xdb/0x1e0 [] ? xs_single+0x42/0x60 [] ? xenbus_read+0x3f/0x70 [] ? xenbus_scanf+0x1a/0x70 [] ? xen_force_evtchn_callback+0x9/0x10 [] ? check_events+0x12/0x20 [] ? xenbus_switch_state+0x40/0xb0 [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? kfree+0x8c/0xd0 [] ? xenbus_dev_fatal+0x47/0x50 [] ? pcistub_get_pci_dev_by_slot+0xa2/0xd0 [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? pciback_export_device+0x119/0x120 [] ? pciback_setup_backend+0x17d/0x330 [] ? xenbus_gather+0xe3/0x180 [] ? _spin_unlock_irqrestore+0x10/0x40 [] ? pciback_xenbus_probe+0x10a/0x110 [] ? xenbus_dev_probe+0x7c/0x150 [] ? driver_probe_device+0x93/0x190 [] ? __device_attach+0x0/0x60 [] ? bus_for_each_drv+0x5c/0x90 [] ? device_attach+0x8c/0xa0 [] ? bus_probe_device+0x25/0x40 [] ? device_add+0x53e/0x6d0 [] ? xenbus_probe_node+0x144/0x1f0 [] ? xenbus_dev_changed+0x1c1/0x1d0 [] ? xenwatch_thread+0x9c/0x170 [] ? autoremove_wake_function+0x0/0x30 [] ? xenwatch_thread+0x0/0x170 [] ? kthread+0x8e/0xa0 [] ? child_rip+0xa/0x20 [] ? int_ret_from_sys_call+0x7/0x1b [] ? retint_restore_args+0x5/0x6 [] ? child_rip+0x0/0x20 BUG: scheduling while atomic: xenwatch/33/0x00000002 Modules linked in: nouveau ttm drm_kms_helper drm cfbfillrect cfbimgblt cfbcopyarea i2c_algo_bit backlight fb intel_agp agpgart sco bnep l2cap bluetooth fuse coretemp hwmon usb_storage snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_ac97_codec emu10k1_gp ac97_bus gameport uvcvideo serio_raw snd_util_mem i2c_i801 snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_usb_lib snd_hwdep snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd videodev v4l1_compat v4l2_compat_ioctl32 soundcore i2c_core uhci_hcd ehci_hcd [last unloaded: scsi_wait_scan] Pid: 33, comm: xenwatch Not tainted 2.6.32.10 #29 Call Trace: [] ? __schedule_bug+0x40/0x60 [] ? thread_return+0x291/0x714 [] ? check_events+0x12/0x20 [] ? read_reply+0xad/0x150 [] ? autoremove_wake_function+0x0/0x30 [] ? xs_talkv+0xdb/0x1e0 [] ? xen_force_evtchn_callback+0x9/0x10 [] ? xenbus_write+0x6b/0xa0 [] ? xenbus_printf+0xa6/0xf0 [] ? xenbus_scanf+0x58/0x70 [] ? xen_force_evtchn_callback+0x9/0x10 [] ? xenbus_switch_state+0x7e/0xb0 [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? xenbus_dev_fatal+0x47/0x50 [] ? pcistub_get_pci_dev_by_slot+0xa2/0xd0 [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? pciback_export_device+0x119/0x120 [] ? pciback_setup_backend+0x17d/0x330 [] ? xenbus_gather+0xe3/0x180 [] ? _spin_unlock_irqrestore+0x10/0x40 [] ? pciback_xenbus_probe+0x10a/0x110 [] ? xenbus_dev_probe+0x7c/0x150 [] ? driver_probe_device+0x93/0x190 [] ? __device_attach+0x0/0x60 [] ? bus_for_each_drv+0x5c/0x90 [] ? device_attach+0x8c/0xa0 [] ? bus_probe_device+0x25/0x40 [] ? device_add+0x53e/0x6d0 [] ? xenbus_probe_node+0x144/0x1f0 [] ? xenbus_dev_changed+0x1c1/0x1d0 [] ? xenwatch_thread+0x9c/0x170 [] ? autoremove_wake_function+0x0/0x30 [] ? xenwatch_thread+0x0/0x170 [] ? kthread+0x8e/0xa0 [] ? child_rip+0xa/0x20 [] ? int_ret_from_sys_call+0x7/0x1b [] ? retint_restore_args+0x5/0x6 [] ? child_rip+0x0/0x20 vif1.0: no IPv6 routers present tap1.0: no IPv6 routers present br0: port 4(tap1.0) entering disabled state device tap1.0 left promiscuous mode br0: port 4(tap1.0) entering disabled state blkback: ring-ref 16383, event-channel 7, protocol 1 (unspecified, assuming native) alloc irq_desc for 1490 on node 0 alloc kstat_irqs on node 0 blkback: ring-ref 16370, event-channel 8, protocol 1 (unspecified, assuming native) alloc irq_desc for 1489 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 1488 on node 0 alloc kstat_irqs on node 0 CIFS VFS: server 10.18.11.5 of type Samba 3.2.5 returned unexpected error on SMB posix open, disabling posix open support. Check if server update available. hrtimer: interrupt took 2910319 ns