Sep 28 20:07:51 localhost su(pam_unix)[14623]: session closed for user root Sep 28 20:26:28 localhost su(pam_unix)[14592]: session closed for user root Sep 28 20:26:44 localhost su(pam_unix)[15288]: session closed for user root Sep 28 20:26:45 localhost kde(pam_unix)[13882]: session closed for user n0th Sep 28 20:28:58 localhost syslog-ng[12168]: syslog-ng version 1.6.11 starting Sep 28 20:28:58 localhost syslog-ng[12168]: Changing permissions on special file /dev/tty12 Sep 28 20:28:58 localhost 00622 MSFT 0x00000097) @ 0x000000003ffc0200 Sep 28 20:28:58 localhost [ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x03000622 MSFT 0x00000097) @ 0x000000003ffc0390 Sep 28 20:28:58 localhost [ 0.000000] ACPI: MCFG (v001 A M I OEMMCFG 0x03000622 MSFT 0x00000097) @ 0x000000003ffc03f0 Sep 28 20:28:58 localhost [ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x03000622 MSFT 0x00000097) @ 0x000000003ffce040 Sep 28 20:28:58 localhost [ 0.000000] ACPI: DSDT (v001 A0398 A0398001 0x00000001 INTL 0x02002026) @ 0x0000000000000000 Sep 28 20:28:58 localhost [ 0.000000] No NUMA configuration found Sep 28 20:28:58 localhost [ 0.000000] Faking a node at 0000000000000000-000000003ffc0000 Sep 28 20:28:58 localhost [ 0.000000] Bootmem setup node 0 0000000000000000-000000003ffc0000 Sep 28 20:28:58 localhost [ 0.000000] On node 0 totalpages: 256045 Sep 28 20:28:58 localhost [ 0.000000] DMA zone: 1588 pages, LIFO batch:0 Sep 28 20:28:58 localhost [ 0.000000] DMA32 zone: 254457 pages, LIFO batch:31 Sep 28 20:28:58 localhost [ 0.000000] ACPI: PM-Timer IO Port: 0x808 Sep 28 20:28:58 localhost [ 0.000000] ACPI: Local APIC address 0xfee00000 Sep 28 20:28:58 localhost [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Sep 28 20:28:58 localhost [ 0.000000] Processor #0 15:4 APIC version 20 Sep 28 20:28:58 localhost [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Sep 28 20:28:58 localhost [ 0.000000] Processor #1 15:4 APIC version 20 Sep 28 20:28:58 localhost [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Sep 28 20:28:58 localhost [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 Sep 28 20:28:58 localhost [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Sep 28 20:28:58 localhost [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Sep 28 20:28:58 localhost [ 0.000000] ACPI: IRQ0 used by override. Sep 28 20:28:58 localhost [ 0.000000] ACPI: IRQ2 used by override. Sep 28 20:28:58 localhost [ 0.000000] ACPI: IRQ9 used by override. Sep 28 20:28:58 localhost [ 0.000000] Setting APIC routing to physical flat Sep 28 20:28:58 localhost [ 0.000000] Using ACPI (MADT) for SMP configuration information Sep 28 20:28:58 localhost [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Sep 28 20:28:58 localhost [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs Sep 28 20:28:58 localhost [ 0.000000] Built 1 zonelists. Total pages: 256045 Sep 28 20:28:58 localhost [ 0.000000] Kernel command line: dolvm2 root=/dev/ram0 ramdisk=8192 real_root=/dev/VolGroup00/LogVol00 splash=silent,theme:default quiet CONSOLE=/dev/tty1 init=/linuxrc vga=791 res=1240x1028 Sep 28 20:28:58 localhost [ 0.000000] Initializing CPU#0 Sep 28 20:28:58 localhost [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) Sep 28 20:28:58 localhost [ 0.000000] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. Sep 28 20:28:58 localhost [ 0.000000] time.c: Detected 2660.065 MHz processor. Sep 28 20:28:58 localhost [ 23.868305] Console: colour dummy device 80x25 Sep 28 20:28:58 localhost [ 23.869840] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Sep 28 20:28:58 localhost [ 23.871261] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Sep 28 20:28:58 localhost [ 23.871488] Checking aperture... Sep 28 20:28:58 localhost [ 23.892239] Memory: 1019064k/1048320k available (5736k kernel code, 28868k reserved, 2663k data, 284k init) Sep 28 20:28:58 localhost [ 23.951996] Calibrating delay using timer specific routine.. 5322.40 BogoMIPS (lpj=2661204) Sep 28 20:28:58 localhost [ 23.952087] Security Framework v1.0.0 initialized Sep 28 20:28:58 localhost [ 23.952096] SELinux: Initializing. Sep 28 20:28:58 localhost [ 23.952131] SELinux: Starting in permissive mode Sep 28 20:28:58 localhost [ 23.952141] selinux_register_security: Registering secondary module capability Sep 28 20:28:58 localhost [ 23.952144] Capability LSM initialized as secondary Sep 28 20:28:58 localhost [ 23.952179] Mount-cache hash table entries: 256 Sep 28 20:28:58 localhost [ 23.952455] CPU: Trace cache: 12K uops, L1 D cache: 16K Sep 28 20:28:58 localhost [ 23.952459] CPU: L2 cache: 1024K Sep 28 20:28:58 localhost [ 23.952463] using mwait in idle threads. Sep 28 20:28:58 localhost [ 23.952466] CPU: Physical Processor ID: 0 Sep 28 20:28:58 localhost [ 23.952468] CPU: Processor Core ID: 0 Sep 28 20:28:58 localhost [ 23.952482] CPU0: Thermal monitoring enabled (TM1) Sep 28 20:28:58 localhost [ 23.952500] SMP alternatives: switching to UP code Sep 28 20:28:58 localhost [ 23.953285] ACPI: Core revision 20060707 Sep 28 20:28:58 localhost [ 23.969201] Using local APIC timer interrupts. Sep 28 20:28:58 localhost [ 24.006705] result 8312643 Sep 28 20:28:58 localhost [ 24.006707] Detected 8.312 MHz APIC timer. Sep 28 20:28:58 localhost [ 24.007183] SMP alternatives: switching to SMP code Sep 28 20:28:58 localhost [ 24.007600] Booting processor 1/2 APIC 0x1 Sep 28 20:28:58 localhost [ 24.018280] Initializing CPU#1 Sep 28 20:28:58 localhost [ 24.078655] Calibrating delay using timer specific routine.. 5319.29 BogoMIPS (lpj=2659645) Sep 28 20:28:58 localhost [ 24.078671] CPU: Trace cache: 12K uops, L1 D cache: 16K Sep 28 20:28:58 localhost [ 24.078674] CPU: L2 cache: 1024K Sep 28 20:28:58 localhost [ 24.078678] CPU: Physical Processor ID: 0 Sep 28 20:28:58 localhost [ 24.078680] CPU: Processor Core ID: 1 Sep 28 20:28:58 localhost [ 24.078693] CPU1: Thermal monitoring enabled (TM1) Sep 28 20:28:58 localhost [ 24.078947] Intel(R) Pentium(R) D CPU 2.66GHz stepping 07 Sep 28 20:28:58 localhost [ 24.079686] Brought up 2 CPUs Sep 28 20:28:58 localhost [ 24.079733] testing NMI watchdog ... OK. Sep 28 20:28:58 localhost [ 24.281991] migration_cost=921 Sep 28 20:28:58 localhost [ 24.282218] checking if image is initramfs... it is Sep 28 20:28:58 localhost [ 24.526426] Freeing initrd memory: 3412k freed Sep 28 20:28:58 localhost [ 24.531557] NET: Registered protocol family 16 Sep 28 20:28:58 localhost [ 24.531835] ACPI: bus type pci registered Sep 28 20:28:58 localhost [ 24.536156] PCI: Using MMCONFIG at e0000000 Sep 28 20:28:58 localhost [ 24.536164] PCI: No mmconfig possible on device 0:0 Sep 28 20:28:58 localhost [ 24.536168] PCI: No mmconfig possible on device 0:1 Sep 28 20:28:58 localhost [ 24.536189] PCI: No mmconfig possible on device 0:f Sep 28 20:28:58 localhost [ 24.536192] PCI: No mmconfig possible on device 0:10 Sep 28 20:28:58 localhost [ 24.536196] PCI: No mmconfig possible on device 0:11 Sep 28 20:28:58 localhost [ 24.536200] PCI: No mmconfig possible on device 0:12 Sep 28 20:28:58 localhost [ 24.536203] PCI: No mmconfig possible on device 0:13 Sep 28 20:28:58 localhost [ 24.536223] PCI: No mmconfig possible on device 1:0 Sep 28 20:28:58 localhost [ 24.536405] PCI: No mmconfig possible on device 5:8 Sep 28 20:28:58 localhost [ 24.536412] PCI: No mmconfig possible on device 5:9 Sep 28 20:28:58 localhost [ 24.546193] ACPI: Interpreter enabled Sep 28 20:28:58 localhost [ 24.546198] ACPI: Using IOAPIC for interrupt routing Sep 28 20:28:58 localhost [ 24.548056] ACPI: PCI Root Bridge [PCI0] (0000:00) Sep 28 20:28:58 localhost [ 24.548061] PCI: Probing PCI hardware (bus 00) Sep 28 20:28:58 localhost [ 24.556609] Boot video device is 0000:01:00.0 Sep 28 20:28:58 localhost [ 24.557778] PCI: Transparent bridge - 0000:00:13.1 Sep 28 20:28:58 localhost [ 24.557831] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Sep 28 20:28:58 localhost [ 24.582697] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] Sep 28 20:28:58 localhost [ 24.594169] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] Sep 28 20:28:58 localhost [ 24.594687] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P8._PRT] Sep 28 20:28:58 localhost [ 24.595156] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P9._PRT] Sep 28 20:28:58 localhost [ 24.595729] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT] Sep 28 20:28:58 localhost [ 24.599897] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) Sep 28 20:28:58 localhost [ 24.600273] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) Sep 28 20:28:58 localhost [ 24.600657] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) Sep 28 20:28:58 localhost [ 24.601025] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) Sep 28 20:28:58 localhost [ 24.601403] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Sep 28 20:28:58 localhost [ 24.601773] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Sep 28 20:28:58 localhost [ 24.602147] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Sep 28 20:28:58 localhost [ 24.602523] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Sep 28 20:28:58 localhost [ 24.602663] Linux Plug and Play Support v0.97 (c) Adam Belay Sep 28 20:28:58 localhost [ 24.602686] pnp: PnP ACPI init Sep 28 20:28:58 localhost [ 24.614279] pnp: PnP ACPI: found 13 devices Sep 28 20:28:58 localhost [ 24.614655] SCSI subsystem initialized Sep 28 20:28:58 localhost [ 24.614760] usbcore: registered new driver usbfs Sep 28 20:28:58 localhost [ 24.614817] usbcore: registered new driver hub Sep 28 20:28:58 localhost [ 24.614888] PCI: Using ACPI for IRQ routing Sep 28 20:28:58 localhost [ 24.614893] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Sep 28 20:28:58 localhost [ 24.615065] PCI-GART: No AMD northbridge found. Sep 28 20:28:58 localhost [ 24.616971] pnp: 00:0a: ioport range 0xc00-0xc0f has been reserved Sep 28 20:28:58 localhost [ 24.616975] pnp: 00:0a: ioport range 0xd00-0xd0f has been reserved Sep 28 20:28:58 localhost [ 24.616979] pnp: 00:0a: ioport range 0xa20-0xa2f has been reserved Sep 28 20:28:58 localhost [ 24.616982] pnp: 00:0a: ioport range 0xa30-0xa3f has been reserved Sep 28 20:28:58 localhost [ 24.617031] PCI: Bridge: 0000:00:01.0 Sep 28 20:28:58 localhost [ 24.617033] IO window: disabled. Sep 28 20:28:58 localhost [ 24.617040] MEM window: fa900000-fe9fffff Sep 28 20:28:58 localhost [ 24.617045] PREFETCH window: a7f00000-c7efffff Sep 28 20:28:58 localhost [ 24.617053] PCI: Bridge: 0000:02:00.0 Sep 28 20:28:58 localhost [ 24.617055] IO window: disabled. Sep 28 20:28:58 localhost [ 24.617057] MEM window: disabled. Sep 28 20:28:58 localhost [ 24.617059] PREFETCH window: disabled. Sep 28 20:28:58 localhost [ 24.617062] PCI: Bridge: 0000:02:00.1 Sep 28 20:28:58 localhost [ 24.617063] IO window: disabled. Sep 28 20:28:58 localhost [ 24.617065] MEM window: disabled. Sep 28 20:28:58 localhost [ 24.617067] PREFETCH window: disabled. Sep 28 20:28:58 localhost [ 24.617070] PCI: Bridge: 0000:00:13.0 Sep 28 20:28:58 localhost [ 24.617071] IO window: disabled. Sep 28 20:28:58 localhost [ 24.617078] MEM window: 50000000-500fffff Sep 28 20:28:58 localhost [ 24.617082] PREFETCH window: disabled. Sep 28 20:28:58 localhost [ 24.617089] PCI: Bridge: 0000:00:13.1 Sep 28 20:28:58 localhost [ 24.617092] IO window: c000-cfff Sep 28 20:28:58 localhost [ 24.617098] MEM window: fea00000-feafffff Sep 28 20:28:58 localhost [ 24.617103] PREFETCH window: c7f00000-cfefffff Sep 28 20:28:58 localhost [ 24.617130] PCI: Setting latency timer of device 0000:00:01.0 to 64 Sep 28 20:28:58 localhost [ 24.617137] PCI: Enabling device 0000:00:13.0 (0104 -> 0106) Sep 28 20:28:58 localhost [ 24.617145] PCI: Setting latency timer of device 0000:00:13.0 to 64 Sep 28 20:28:58 localhost [ 24.617156] PCI: Setting latency timer of device 0000:02:00.0 to 64 Sep 28 20:28:58 localhost [ 24.617165] PCI: Setting latency timer of device 0000:02:00.1 to 64 Sep 28 20:28:58 localhost [ 24.617174] PCI: Setting latency timer of device 0000:00:13.1 to 64 Sep 28 20:28:58 localhost [ 24.617235] NET: Registered protocol family 2 Sep 28 20:28:58 localhost [ 24.627380] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) Sep 28 20:28:58 localhost [ 24.627836] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) Sep 28 20:28:58 localhost [ 24.630280] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) Sep 28 20:28:58 localhost [ 24.631721] TCP: Hash tables configured (established 131072 bind 65536) Sep 28 20:28:58 localhost [ 24.631726] TCP reno registered Sep 28 20:28:58 localhost [ 24.637209] audit: initializing netlink socket (disabled) Sep 28 20:28:58 localhost [ 24.637288] audit(1159475294.734:1): initialized Sep 28 20:28:58 localhost [ 24.637553] Total HugeTLB memory allocated, 0 Sep 28 20:28:58 localhost [ 24.637751] VFS: Disk quotas dquot_6.5.1 Sep 28 20:28:58 localhost [ 24.637788] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Sep 28 20:28:58 localhost [ 24.637928] squashfs: version 3.1 (2006/08/19) Phillip Lougher Sep 28 20:28:58 localhost [ 24.637952] Coda Kernel/Venus communications, v6.0.0, coda@cs.cmu.edu Sep 28 20:28:58 localhost [ 24.638344] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Sep 28 20:28:58 localhost [ 24.638875] NTFS driver 2.1.27 [Flags: R/W]. Sep 28 20:28:58 localhost [ 24.638961] QNX4 filesystem 0.2.3 registered. Sep 28 20:28:58 localhost [ 24.638965] fuse init (API version 7.7) Sep 28 20:28:58 localhost [ 24.639099] JFS: nTxBlock = 7988, nTxLock = 63905 Sep 28 20:28:58 localhost [ 24.647107] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled Sep 28 20:28:58 localhost [ 24.647461] SGI XFS Quota Management subsystem Sep 28 20:28:58 localhost [ 24.647522] SELinux: Registering netfilter hooks Sep 28 20:28:58 localhost [ 24.653274] Initializing Cryptographic API Sep 28 20:28:58 localhost [ 24.653282] io scheduler noop registered Sep 28 20:28:58 localhost [ 24.653298] io scheduler anticipatory registered (default) Sep 28 20:28:58 localhost [ 24.653313] io scheduler deadline registered Sep 28 20:28:58 localhost [ 24.653353] io scheduler cfq registered Sep 28 20:28:58 localhost [ 24.655173] PCI: Setting latency timer of device 0000:02:00.0 to 64 Sep 28 20:28:58 localhost [ 24.655179] pcie_portdrv_probe->Dev[287c:1106] has invalid IRQ. Check vendor BIOS Sep 28 20:28:58 localhost [ 24.655214] assign_interrupt_mode Found MSI capability Sep 28 20:28:58 localhost [ 24.655293] Allocate Port Service[0000:02:00.0:pcie00] Sep 28 20:28:58 localhost [ 24.655360] Allocate Port Service[0000:02:00.0:pcie01] Sep 28 20:28:58 localhost [ 24.655414] Allocate Port Service[0000:02:00.0:pcie03] Sep 28 20:28:58 localhost [ 24.655471] PCI: Setting latency timer of device 0000:02:00.1 to 64 Sep 28 20:28:58 localhost [ 24.655475] pcie_portdrv_probe->Dev[287d:1106] has invalid IRQ. Check vendor BIOS Sep 28 20:28:58 localhost [ 24.655497] assign_interrupt_mode Found MSI capability Sep 28 20:28:58 localhost [ 24.655521] Allocate Port Service[0000:02:00.1:pcie00] Sep 28 20:28:58 localhost [ 24.655574] Allocate Port Service[0000:02:00.1:pcie01] Sep 28 20:28:58 localhost [ 24.655628] Allocate Port Service[0000:02:00.1:pcie03] Sep 28 20:28:58 localhost [ 24.697293] lp: driver loaded but no devices found Sep 28 20:28:58 localhost [ 24.697419] Real Time Clock Driver v1.12ac Sep 28 20:28:58 localhost [ 24.704567] ppdev: user-space parallel port driver Sep 28 20:28:58 localhost [ 24.704574] Linux agpgart interface v0.101 (c) Dave Jones Sep 28 20:28:58 localhost [ 24.704795] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc20010680000, using 3072k, total 262144k Sep 28 20:28:58 localhost [ 24.704799] vesafb: mode is 1024x768x16, linelength=2048, pages=1 Sep 28 20:28:58 localhost [ 24.704802] vesafb: scrolling: redraw Sep 28 20:28:58 localhost [ 24.704806] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Sep 28 20:28:58 localhost [ 24.729288] Console: switching to colour frame buffer device 128x48 Sep 28 20:28:58 localhost [ 24.753493] fbsplash: console 0 using theme 'default' Sep 28 20:28:58 localhost [ 25.037869] fbsplash: switched splash state to 'on' on console 0 Sep 28 20:28:58 localhost [ 25.038498] fb0: VESA VGA frame buffer device Sep 28 20:28:58 localhost [ 25.038562] ACPI: Power Button (FF) [PWRF] Sep 28 20:28:58 localhost [ 25.038590] ACPI: Sleep Button (CM) [SLPB] Sep 28 20:28:58 localhost [ 25.038597] ACPI: Power Button (CM) [PWRB] Sep 28 20:28:58 localhost [ 25.038758] Using specific hotkey driver Sep 28 20:28:58 localhost [ 25.038868] ACPI: Processor [CPU1] (supports 16 throttling states) Sep 28 20:28:58 localhost [ 25.047322] ibm_acpi: ec object not found Sep 28 20:28:58 localhost [ 25.047336] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled Sep 28 20:28:58 localhost [ 25.047487] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 28 20:28:58 localhost [ 25.048410] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 28 20:28:58 localhost [ 25.048705] parport: PnPBIOS parport detected. Sep 28 20:28:58 localhost [ 25.048761] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] Sep 28 20:28:58 localhost [ 25.131093] lp0: using parport0 (interrupt-driven). Sep 28 20:28:58 localhost [ 25.131449] PNP: No PS/2 controller found. Probing ports directly. Sep 28 20:28:58 localhost [ 25.131689] serio: i8042 AUX port at 0x60,0x64 irq 12 Sep 28 20:28:58 localhost [ 25.131705] serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 28 20:28:58 localhost [ 25.131713] parport0: cannot grant exclusive access for device parkbd Sep 28 20:28:58 localhost [ 25.131907] mice: PS/2 mouse device common for all mice Sep 28 20:28:58 localhost [ 25.131911] ts: Compaq touchscreen protocol output Sep 28 20:28:58 localhost [ 25.132136] Floppy drive(s): fd0 is 1.44M Sep 28 20:28:58 localhost [ 25.147808] FDC 0 is a post-1991 82077 Sep 28 20:28:58 localhost [ 25.149767] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Sep 28 20:28:58 localhost [ 25.150213] loop: loaded (max 8 devices) Sep 28 20:28:58 localhost [ 25.150216] Compaq SMART2 Driver (v 2.6.0) Sep 28 20:28:58 localhost [ 25.150279] HP CISS Driver (v 3.6.10) Sep 28 20:28:58 localhost [ 25.150488] v2.3 : Micro Memory(tm) PCI memory board block driver Sep 28 20:28:58 localhost [ 25.150545] MM: desc_per_page = 128 Sep 28 20:28:58 localhost [ 25.150830] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Sep 28 20:28:58 localhost [ 25.150834] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Sep 28 20:28:58 localhost [ 25.150895] VP_IDE: IDE controller at PCI slot 0000:00:0f.1 Sep 28 20:28:58 localhost [ 25.150922] PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 0 Sep 28 20:28:58 localhost [ 25.150950] VP_IDE: chipset revision 7 Sep 28 20:28:58 localhost [ 25.150952] VP_IDE: not 100% native mode: will probe irqs later Sep 28 20:28:58 localhost [ 25.150965] VP_IDE: VIA vt8251 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 Sep 28 20:28:58 localhost [ 25.150974] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA Sep 28 20:28:58 localhost [ 25.150992] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio Sep 28 20:28:58 localhost [ 25.151005] Probing IDE interface ide0... Sep 28 20:28:58 localhost [ 25.943032] hda: LITE-ON DVDRW SHW-16H5S, ATAPI CD/DVD-ROM drive Sep 28 20:28:58 localhost [ 26.655175] hdb: HL-DT-STDVD-ROM GDR8160B, ATAPI CD/DVD-ROM drive Sep 28 20:28:58 localhost [ 26.719368] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Sep 28 20:28:58 localhost [ 26.719493] Probing IDE interface ide1... Sep 28 20:28:58 localhost [ 27.238184] Probing IDE interface ide1... Sep 28 20:28:58 localhost [ 27.757084] hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66) Sep 28 20:28:58 localhost [ 27.757094] Uniform CD-ROM driver Revision: 3.20 Sep 28 20:28:58 localhost [ 27.773644] hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) Sep 28 20:28:58 localhost [ 27.782469] Loading iSCSI transport class v1.1-646.<5>iscsi: registered transport (tcp) Sep 28 20:28:58 localhost [ 27.782782] Adaptec aacraid driver (1.1-5[2409]-mh2) Sep 28 20:28:58 localhost [ 27.783052] QLogic Fibre Channel HBA Driver Sep 28 20:28:58 localhost [ 27.783113] Emulex LightPulse Fibre Channel SCSI driver 8.1.9 Sep 28 20:28:58 localhost [ 27.783116] Copyright(c) 2004-2006 Emulex. All rights reserved. Sep 28 20:28:58 localhost [ 27.783444] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) Sep 28 20:28:58 localhost [ 27.783449] megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) Sep 28 20:28:58 localhost [ 27.783504] megasas: 00.00.03.01 Sun May 14 22:49:52 PDT 2006 Sep 28 20:28:58 localhost [ 27.783622] GDT-HA: Storage RAID Controller Driver. Version: 3.05 Sep 28 20:28:58 localhost [ 27.783900] GDT-HA: Found 0 PCI Storage RAID Controllers Sep 28 20:28:58 localhost [ 27.784001] 3ware Storage Controller device driver for Linux v1.26.02.001. Sep 28 20:28:58 localhost [ 27.784061] 3ware 9000 Storage Controller device driver for Linux v2.26.02.007. Sep 28 20:28:58 localhost [ 27.784114] ipr: IBM Power RAID SCSI Device Driver version: 2.1.3 (March 29, 2006) Sep 28 20:28:58 localhost [ 27.784258] libata version 2.00 loaded. Sep 28 20:28:58 localhost [ 27.784311] ahci 0000:00:0f.0: version 2.0 Sep 28 20:28:58 localhost [ 27.784337] GSI 16 sharing vector 0xC1 and IRQ 16 Sep 28 20:28:58 localhost [ 27.784342] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 193 Sep 28 20:28:58 localhost [ 27.784349] PCI: VIA IRQ fixup for 0000:00:0f.0, from 10 to 1 Sep 28 20:28:58 localhost [ 32.086146] ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode Sep 28 20:28:58 localhost [ 32.086151] ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part Sep 28 20:28:58 localhost [ 32.086299] ata1: SATA max UDMA/133 cmd 0xFFFFC2000001AD00 ctl 0x0 bmdma 0x0 irq 201 Sep 28 20:28:58 localhost [ 32.086465] ata2: SATA max UDMA/133 cmd 0xFFFFC2000001AD80 ctl 0x0 bmdma 0x0 irq 201 Sep 28 20:28:58 localhost [ 32.086633] ata3: SATA max UDMA/133 cmd 0xFFFFC2000001AE00 ctl 0x0 bmdma 0x0 irq 201 Sep 28 20:28:58 localhost [ 32.086800] ata4: SATA max UDMA/133 cmd 0xFFFFC2000001AE80 ctl 0x0 bmdma 0x0 irq 201 Sep 28 20:28:58 localhost [ 32.086816] scsi0 : ahci Sep 28 20:28:58 localhost [ 32.553943] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Sep 28 20:28:58 localhost [ 32.558839] ata1.00: ATA-7, max UDMA7, 312581808 sectors: LBA48 NCQ (depth 0/32) Sep 28 20:28:58 localhost [ 32.558843] ata1.00: ata1: dev 0 multi count 16 Sep 28 20:28:58 localhost [ 32.563746] ata1.00: configured for UDMA/133 Sep 28 20:28:58 localhost [ 32.563754] scsi1 : ahci Sep 28 20:28:58 localhost [ 32.866130] ata2: SATA link down (SStatus 0 SControl 300) Sep 28 20:28:58 localhost [ 32.866139] scsi2 : ahci Sep 28 20:28:58 localhost [ 33.168355] ata3: SATA link down (SStatus 0 SControl 300) Sep 28 20:28:58 localhost [ 33.168363] scsi3 : ahci Sep 28 20:28:58 localhost [ 33.470578] ata4: SATA link down (SStatus 0 SControl 300) Sep 28 20:28:58 localhost [ 33.470698] Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10 Sep 28 20:28:58 localhost [ 33.470714] Type: Direct-Access ANSI SCSI revision: 05 Sep 28 20:28:58 localhost [ 33.471626] RocketRAID 3xxx SATA Controller driver v1.0 (060426) Sep 28 20:28:58 localhost [ 33.471685] st: Version 20050830, fixed bufsize 32768, s/g segs 256 Sep 28 20:28:58 localhost [ 33.471755] osst :I: Tape driver with OnStream support version 0.99.4 Sep 28 20:28:58 localhost [ 33.471757] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ Sep 28 20:28:58 localhost [ 33.471947] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) Sep 28 20:28:58 localhost [ 33.471963] sda: Write Protect is off Sep 28 20:28:58 localhost [ 33.471966] sda: Mode Sense: 00 3a 00 00 Sep 28 20:28:58 localhost [ 33.471988] SCSI device sda: drive cache: write back Sep 28 20:28:58 localhost [ 33.472066] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) Sep 28 20:28:58 localhost [ 33.472079] sda: Write Protect is off Sep 28 20:28:58 localhost [ 33.472082] sda: Mode Sense: 00 3a 00 00 Sep 28 20:28:58 localhost [ 33.472102] SCSI device sda: drive cache: write back Sep 28 20:28:58 localhost [ 33.472108] sda: sda1 sda2 sda3 Sep 28 20:28:58 localhost [ 33.482309] sd 0:0:0:0: Attached scsi disk sda Sep 28 20:28:58 localhost [ 33.482425] sd 0:0:0:0: Attached scsi generic sg0 type 0 Sep 28 20:28:58 localhost [ 33.482439] I2O subsystem v1.325 Sep 28 20:28:58 localhost [ 33.482443] i2o: max drivers = 8 Sep 28 20:28:58 localhost [ 33.482625] I2O Configuration OSM v1.323 Sep 28 20:28:58 localhost [ 33.482716] I2O Bus Adapter OSM v1.317 Sep 28 20:28:58 localhost [ 33.482757] I2O Block Device OSM v1.325 Sep 28 20:28:58 localhost [ 33.482918] I2O SCSI Peripheral OSM v1.316 Sep 28 20:28:58 localhost [ 33.482961] I2O ProcFS OSM v1.316 Sep 28 20:28:58 localhost [ 33.483003] Fusion MPT base driver 3.04.01 Sep 28 20:28:58 localhost [ 33.483006] Copyright (c) 1999-2005 LSI Logic Corporation Sep 28 20:28:58 localhost [ 33.483011] Fusion MPT SPI Host driver 3.04.01 Sep 28 20:28:58 localhost [ 33.483073] Fusion MPT FC Host driver 3.04.01 Sep 28 20:28:58 localhost [ 33.483135] Fusion MPT SAS Host driver 3.04.01 Sep 28 20:28:58 localhost [ 33.483201] Fusion MPT misc device (ioctl) driver 3.04.01 Sep 28 20:28:58 localhost [ 33.483247] mptctl: Registered with Fusion MPT base driver Sep 28 20:28:58 localhost [ 33.483251] mptctl: /dev/mptctl @ (major,minor=10,220) Sep 28 20:28:58 localhost [ 33.483253] Fusion MPT LAN driver 3.04.01 Sep 28 20:28:58 localhost [ 33.483276] ieee1394: Initialized config rom entry `ip1394' Sep 28 20:28:58 localhost [ 33.483428] GSI 17 sharing vector 0xD1 and IRQ 17 Sep 28 20:28:58 localhost [ 33.483433] ACPI: PCI Interrupt 0000:05:09.2[B] -> GSI 19 (level, low) -> IRQ 209 Sep 28 20:28:58 localhost [ 33.533682] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[209] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8] Sep 28 20:28:58 localhost [ 33.533736] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) Sep 28 20:28:58 localhost [ 33.533740] ieee1394: sbp2: Try serialize_io=0 for better performance Sep 28 20:28:58 localhost [ 33.533797] usbmon: debugfs is not available Sep 28 20:28:58 localhost [ 33.533843] usbcore: registered new driver usblp Sep 28 20:28:58 localhost [ 33.533847] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Sep 28 20:28:58 localhost [ 33.533850] Initializing USB Mass Storage driver... Sep 28 20:28:58 localhost [ 33.533891] usbcore: registered new driver usb-storage Sep 28 20:28:58 localhost [ 33.533893] USB Mass Storage support registered. Sep 28 20:28:58 localhost [ 33.533942] usbcore: registered new driver libusual Sep 28 20:28:58 localhost [ 33.533984] usbcore: registered new driver hiddev Sep 28 20:28:58 localhost [ 33.534026] usbcore: registered new driver usbhid Sep 28 20:28:58 localhost [ 33.534029] drivers/usb/input/hid-core.c: v2.6:USB HID core driver Sep 28 20:28:58 localhost [ 33.534053] md: linear personality registered for level -1 Sep 28 20:28:58 localhost [ 33.534055] md: raid0 personality registered for level 0 Sep 28 20:28:58 localhost [ 33.534058] md: raid1 personality registered for level 1 Sep 28 20:28:58 localhost [ 33.534061] md: raid10 personality registered for level 10 Sep 28 20:28:58 localhost [ 33.550482] raid6: int64x1 1265 MB/s Sep 28 20:28:58 localhost [ 33.567457] raid6: int64x2 1648 MB/s Sep 28 20:28:58 localhost [ 33.584409] raid6: int64x4 1890 MB/s Sep 28 20:28:58 localhost [ 33.601359] raid6: int64x8 1433 MB/s Sep 28 20:28:58 localhost [ 33.618318] raid6: sse2x1 1691 MB/s Sep 28 20:28:58 localhost [ 33.635270] raid6: sse2x2 1738 MB/s Sep 28 20:28:58 localhost [ 33.652212] raid6: sse2x4 2539 MB/s Sep 28 20:28:58 localhost [ 33.652215] raid6: using algorithm sse2x4 (2539 MB/s) Sep 28 20:28:58 localhost [ 33.652220] md: raid6 personality registered for level 6 Sep 28 20:28:58 localhost [ 33.652223] md: raid5 personality registered for level 5 Sep 28 20:28:58 localhost [ 33.652225] md: raid4 personality registered for level 4 Sep 28 20:28:58 localhost [ 33.652229] raid5: automatically using best checksumming function: generic_sse Sep 28 20:28:58 localhost [ 33.657188] generic_sse: 4088.000 MB/sec Sep 28 20:28:58 localhost [ 33.657191] raid5: using function: generic_sse (4088.000 MB/sec) Sep 28 20:28:58 localhost [ 33.657194] md: multipath personality registered for level -4 Sep 28 20:28:58 localhost [ 33.657197] md: faulty personality registered for level -5 Sep 28 20:28:58 localhost [ 33.657200] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 Sep 28 20:28:58 localhost [ 33.657202] md: bitmap version 4.39 Sep 28 20:28:58 localhost [ 33.657368] device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com Sep 28 20:28:58 localhost [ 33.657828] Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC). Sep 28 20:28:58 localhost [ 33.657907] ALSA device list: Sep 28 20:28:58 localhost [ 33.657910] No soundcards found. Sep 28 20:28:58 localhost [ 33.657997] TCP bic registered Sep 28 20:28:58 localhost [ 33.658013] NET: Registered protocol family 1 Sep 28 20:28:58 localhost [ 33.658025] NET: Registered protocol family 17 Sep 28 20:28:58 localhost [ 33.658280] ACPI: (supports S0 S1 S3 S4 S5) Sep 28 20:28:58 localhost [ 33.658329] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Sep 28 20:28:58 localhost [ 33.658382] Freeing unused kernel memory: 284k freed Sep 28 20:28:58 localhost [ 34.006691] GSI 18 sharing vector 0xD9 and IRQ 18 Sep 28 20:28:58 localhost [ 34.006698] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 22 (level, low) -> IRQ 217 Sep 28 20:28:58 localhost [ 34.006705] PCI: VIA IRQ fixup for 0000:00:10.4, from 5 to 9 Sep 28 20:28:58 localhost [ 34.007128] ehci_hcd 0000:00:10.4: EHCI Host Controller Sep 28 20:28:58 localhost [ 34.007354] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 Sep 28 20:28:58 localhost [ 34.007401] ehci_hcd 0000:00:10.4: debug port 1 Sep 28 20:28:58 localhost [ 34.007422] ehci_hcd 0000:00:10.4: irq 217, io mem 0xfebff800 Sep 28 20:28:58 localhost [ 34.007430] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Sep 28 20:28:58 localhost [ 34.007633] usb usb1: configuration #1 chosen from 1 choice Sep 28 20:28:58 localhost [ 34.007697] hub 1-0:1.0: USB hub found Sep 28 20:28:58 localhost [ 34.007706] hub 1-0:1.0: 8 ports detected Sep 28 20:28:58 localhost [ 34.142869] ata1: soft resetting port Sep 28 20:28:58 localhost [ 34.144802] USB Universal Host Controller Interface driver v3.0 Sep 28 20:28:58 localhost [ 34.144998] GSI 19 sharing vector 0xE1 and IRQ 19 Sep 28 20:28:58 localhost [ 34.145004] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 225 Sep 28 20:28:58 localhost [ 34.145011] PCI: VIA IRQ fixup for 0000:00:10.0, from 11 to 1 Sep 28 20:28:58 localhost [ 34.145042] uhci_hcd 0000:00:10.0: UHCI Host Controller Sep 28 20:28:58 localhost [ 34.145114] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 Sep 28 20:28:58 localhost [ 34.145152] uhci_hcd 0000:00:10.0: irq 225, io base 0x0000e080 Sep 28 20:28:58 localhost [ 34.145349] usb usb2: configuration #1 chosen from 1 choice Sep 28 20:28:58 localhost [ 34.145408] hub 2-0:1.0: USB hub found Sep 28 20:28:58 localhost [ 34.145419] hub 2-0:1.0: 2 ports detected Sep 28 20:28:58 localhost [ 34.246719] ACPI: PCI Interrupt 0000:00:10.1[C] -> GSI 22 (level, low) -> IRQ 217 Sep 28 20:28:58 localhost [ 34.246726] PCI: VIA IRQ fixup for 0000:00:10.1, from 5 to 9 Sep 28 20:28:58 localhost [ 34.246751] uhci_hcd 0000:00:10.1: UHCI Host Controller Sep 28 20:28:58 localhost [ 34.246801] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 Sep 28 20:28:58 localhost [ 34.246826] uhci_hcd 0000:00:10.1: irq 217, io base 0x0000e000 Sep 28 20:28:58 localhost [ 34.246995] usb usb3: configuration #1 chosen from 1 choice Sep 28 20:28:58 localhost [ 34.247051] hub 3-0:1.0: USB hub found Sep 28 20:28:58 localhost [ 34.247061] hub 3-0:1.0: 2 ports detected Sep 28 20:28:58 localhost [ 34.297469] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Sep 28 20:28:58 localhost [ 34.307233] ata1.00: configured for UDMA/133 Sep 28 20:28:58 localhost [ 34.307241] ata1: EH complete Sep 28 20:28:58 localhost [ 34.307290] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) Sep 28 20:28:58 localhost [ 34.307307] sda: Write Protect is off Sep 28 20:28:58 localhost [ 34.307310] sda: Mode Sense: 00 3a 00 00 Sep 28 20:28:58 localhost [ 34.307332] SCSI device sda: drive cache: write back Sep 28 20:28:58 localhost [ 34.348472] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 193 Sep 28 20:28:58 localhost [ 34.348479] PCI: VIA IRQ fixup for 0000:00:10.2, from 10 to 1 Sep 28 20:28:58 localhost [ 34.348503] uhci_hcd 0000:00:10.2: UHCI Host Controller Sep 28 20:28:58 localhost [ 34.348559] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 Sep 28 20:28:58 localhost [ 34.348586] uhci_hcd 0000:00:10.2: irq 193, io base 0x0000dc00 Sep 28 20:28:58 localhost [ 34.348753] usb usb4: configuration #1 chosen from 1 choice Sep 28 20:28:58 localhost [ 34.348806] hub 4-0:1.0: USB hub found Sep 28 20:28:58 localhost [ 34.348819] hub 4-0:1.0: 2 ports detected Sep 28 20:28:58 localhost [ 34.450188] GSI 20 sharing vector 0xE9 and IRQ 20 Sep 28 20:28:58 localhost [ 34.450192] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 233 Sep 28 20:28:58 localhost [ 34.450198] PCI: VIA IRQ fixup for 0000:00:10.3, from 3 to 9 Sep 28 20:28:58 localhost [ 34.450221] uhci_hcd 0000:00:10.3: UHCI Host Controller Sep 28 20:28:58 localhost [ 34.450275] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 Sep 28 20:28:58 localhost [ 34.450302] uhci_hcd 0000:00:10.3: irq 233, io base 0x0000d880 Sep 28 20:28:58 localhost [ 34.450465] usb usb5: configuration #1 chosen from 1 choice Sep 28 20:28:58 localhost [ 34.450518] hub 5-0:1.0: USB hub found Sep 28 20:28:58 localhost [ 34.450529] hub 5-0:1.0: 2 ports detected Sep 28 20:28:58 localhost [ 34.576995] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) Sep 28 20:28:58 localhost [ 34.605521] sl811: driver sl811-hcd, 19 May 2005 Sep 28 20:28:58 localhost [ 34.627630] usb 2-1: new full speed USB device using uhci_hcd and address 2 Sep 28 20:28:58 localhost [ 34.787797] usb 2-1: configuration #1 chosen from 1 choice Sep 28 20:28:58 localhost [ 34.788404] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0091035b01] Sep 28 20:28:58 localhost [ 34.790661] hub 2-1:1.0: USB hub found Sep 28 20:28:58 localhost [ 34.793589] hub 2-1:1.0: 4 ports detected Sep 28 20:28:58 localhost [ 35.312850] usb 3-2: new full speed USB device using uhci_hcd and address 2 Sep 28 20:28:58 localhost [ 35.473976] usb 3-2: configuration #1 chosen from 1 choice Sep 28 20:28:58 localhost [ 35.479903] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x106D Sep 28 20:28:58 localhost [ 35.924610] EXT3-fs: INFO: recovery required on readonly filesystem. Sep 28 20:28:58 localhost [ 35.924615] EXT3-fs: write access will be enabled during recovery. Sep 28 20:28:58 localhost [ 36.071431] usb 2-1.1: new low speed USB device using uhci_hcd and address 3 Sep 28 20:28:58 localhost [ 36.202392] usb 2-1.1: configuration #1 chosen from 1 choice Sep 28 20:28:58 localhost [ 36.219312] input: Logitech Logitech Gaming Keyboard as /class/input/input0 Sep 28 20:28:58 localhost [ 36.219416] input: USB HID v1.10 Keyboard [Logitech Logitech Gaming Keyboard] on usb-0000:00:10.0-1.1 Sep 28 20:28:58 localhost [ 36.253105] input: Logitech Logitech Gaming Keyboard as /class/input/input1 Sep 28 20:28:58 localhost [ 36.253660] input,hiddev1: USB HID v1.10 Device [Logitech Logitech Gaming Keyboard] on usb-0000:00:10.0-1.1 Sep 28 20:28:58 localhost [ 36.430544] usb 2-1.2: new low speed USB device using uhci_hcd and address 4 Sep 28 20:28:58 localhost [ 36.556490] usb 2-1.2: configuration #1 chosen from 1 choice Sep 28 20:28:58 localhost [ 36.575390] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 Sep 28 20:28:58 localhost [ 36.576250] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.0-1.2 Sep 28 20:28:58 localhost [ 36.753745] usb 2-1.4: new full speed USB device using uhci_hcd and address 5 Sep 28 20:28:58 localhost [ 36.885682] usb 2-1.4: configuration #1 chosen from 1 choice Sep 28 20:28:58 localhost [ 36.897594] input: G15 Keyboard G15 Keyboard as /class/input/input3 Sep 28 20:28:58 localhost [ 36.898207] input,hiddev2: USB HID v1.11 Keypad [G15 Keyboard G15 Keyboard] on usb-0000:00:10.0-1.4 Sep 28 20:28:58 localhost [ 39.277947] kjournald starting. Commit interval 5 seconds Sep 28 20:28:58 localhost [ 39.277973] EXT3-fs: dm-0: orphan cleanup on readonly fs Sep 28 20:28:58 localhost [ 39.277982] ext3_orphan_cleanup: deleting unreferenced inode 5865546 Sep 28 20:28:58 localhost [ 39.278021] ext3_orphan_cleanup: deleting unreferenced inode 5865495 Sep 28 20:28:58 localhost [ 39.278034] ext3_orphan_cleanup: deleting unreferenced inode 5865521 Sep 28 20:28:58 localhost [ 39.278047] ext3_orphan_cleanup: deleting unreferenced inode 8029697 Sep 28 20:28:58 localhost [ 39.278077] EXT3-fs: dm-0: 4 orphan inodes deleted Sep 28 20:28:58 localhost [ 39.278080] EXT3-fs: recovery complete. Sep 28 20:28:58 localhost [ 39.287261] EXT3-fs: mounted filesystem with ordered data mode. Sep 28 20:28:58 localhost [ 44.801039] gameport: EMU10K1 is pci0000:05:09.1/gameport0, io 0xcc00, speed 1074kHz Sep 28 20:28:58 localhost [ 46.552751] PCI: Enabling device 0000:02:01.0 (0000 -> 0002) Sep 28 20:28:58 localhost [ 46.552763] GSI 21 sharing vector 0x32 and IRQ 21 Sep 28 20:28:58 localhost [ 46.552768] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 50 Sep 28 20:28:58 localhost [ 46.552774] PCI: VIA IRQ fixup for 0000:02:01.0, from 0 to 2 Sep 28 20:28:58 localhost [ 46.553292] PCI: Setting latency timer of device 0000:02:01.0 to 64 Sep 28 20:28:58 localhost [ 46.558988] hda-intel: no codecs found! Sep 28 20:28:58 localhost [ 46.644517] Linux video capture interface: v2.00 Sep 28 20:28:58 localhost [ 46.950282] nvidia: module license 'NVIDIA' taints kernel. Sep 28 20:28:58 localhost [ 47.207111] GSI 22 sharing vector 0x3A and IRQ 22 Sep 28 20:28:58 localhost [ 47.207117] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 58 Sep 28 20:28:58 localhost [ 47.207409] NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-9625 Thu Sep 14 15:31:20 PDT 2006 Sep 28 20:28:58 localhost [ 47.247656] GSI 23 sharing vector 0x42 and IRQ 23 Sep 28 20:28:58 localhost [ 47.247663] ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 18 (level, low) -> IRQ 66 Sep 28 20:28:58 localhost [ 47.251118] Installing spdif_bug patch: Audigy 2 Platinum [SB0240P] Sep 28 20:28:58 localhost [ 47.333370] via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker Sep 28 20:28:58 localhost [ 47.333531] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 233 Sep 28 20:28:58 localhost [ 47.333540] PCI: VIA IRQ fixup for 0000:00:12.0, from 11 to 9 Sep 28 20:28:58 localhost [ 47.333702] eth0: VIA Rhine II at 0x1d400, 00:15:f2:9a:90:68, IRQ 233. Sep 28 20:28:58 localhost [ 47.334428] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1. Sep 28 20:28:58 localhost [ 47.373754] ivtv: ==================== START INIT IVTV ==================== Sep 28 20:28:58 localhost [ 47.373760] ivtv: version 0.7.0 (tagged release) loading Sep 28 20:28:58 localhost [ 47.373763] ivtv: Linux version: 2.6.18-gentoo SMP mod_unload gcc-4.1 Sep 28 20:28:58 localhost [ 47.373765] ivtv: In case of problems please include the debug info between Sep 28 20:28:58 localhost [ 47.373768] ivtv: the START INIT IVTV and END INIT IVTV lines, along with Sep 28 20:28:58 localhost [ 47.373770] ivtv: any module options, when mailing the ivtv-users mailinglist. Sep 28 20:28:58 localhost [ 47.373932] ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based) Sep 28 20:28:58 localhost [ 47.374033] ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 17 (level, low) -> IRQ 50 Sep 28 20:28:58 localhost [ 47.413779] tveeprom 0-0050: Hauppauge model 48134, rev J321, serial# 7195917 Sep 28 20:28:58 localhost [ 47.413785] tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5) Sep 28 20:28:58 localhost [ 47.413791] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04) Sep 28 20:28:58 localhost [ 47.413794] tveeprom 0-0050: audio processor is MSP4418 (idx 25) Sep 28 20:28:58 localhost [ 47.413797] tveeprom 0-0050: decoder processor is SAA7115 (idx 19) Sep 28 20:28:58 localhost [ 47.413800] tveeprom 0-0050: has radio, has IR remote Sep 28 20:28:58 localhost [ 47.479997] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) Sep 28 20:28:58 localhost [ 47.640166] ivtv0: Failed to load module tda9887 Sep 28 20:28:58 localhost [ 47.679060] saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) Sep 28 20:28:58 localhost [ 47.855649] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) Sep 28 20:28:58 localhost [ 47.966496] msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0) Sep 28 20:28:58 localhost [ 47.966502] msp3400 0-0040: MSP4418G-A2 supports nicam and radio, mode is autodetect and autoselect Sep 28 20:28:58 localhost [ 49.001817] agpgart: Detected VIA P4M800CE chipset Sep 28 20:28:58 localhost [ 49.021536] agpgart: AGP aperture is 256M @ 0xd0000000 Sep 28 20:28:58 localhost [ 49.468696] input: PC Speaker as /class/input/input4 Sep 28 20:28:58 localhost [ 52.444470] ivtv0: unable to open firmware v4l-cx2341x-enc.fw Sep 28 20:28:58 localhost [ 52.444475] ivtv0: did you put the firmware in the hotplug firmware directory? Sep 28 20:28:58 localhost [ 52.444479] ivtv0 warning: failed loading encoder firmware Sep 28 20:28:58 localhost [ 52.444482] ivtv0 warning: Error loading firmware -3! Sep 28 20:28:58 localhost [ 52.444485] ivtv0: Error -3 initializing firmware. Sep 28 20:28:58 localhost [ 52.450451] ivtv0: Error -12 on initialization Sep 28 20:28:58 localhost [ 52.450462] ivtv: probe of 0000:05:08.0 failed with error -12 Sep 28 20:28:58 localhost [ 52.450486] ivtv: ==================== END INIT IVTV ==================== Sep 28 20:28:58 localhost [ 56.759909] EXT3 FS on dm-0, internal journal Sep 28 20:28:58 localhost [ 57.198751] kjournald starting. Commit interval 5 seconds Sep 28 20:28:58 localhost [ 57.198901] EXT3 FS on sda2, internal journal Sep 28 20:28:58 localhost [ 57.198908] EXT3-fs: mounted filesystem with ordered data mode. Sep 28 20:28:58 localhost [ 57.268733] NTFS volume version 3.1. Sep 28 20:28:58 localhost [ 57.268741] NTFS-fs warning (device sda1): load_system_files(): Unsupported volume flags 0x4000 encountered. Sep 28 20:28:58 localhost [ 57.268746] NTFS-fs warning (device sda1): load_system_files(): Volume has unsupported flags set. Will not be able to remount read-write. Run chkdsk and mount in Windows. Sep 28 20:28:58 localhost [ 57.427261] Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k Sep 28 20:28:59 localhost [ 68.258665] fbsplash: console 1 using theme 'default' Sep 28 20:28:59 localhost [ 68.394307] fbsplash: switched splash state to 'on' on console 1 Sep 28 20:28:59 localhost [ 68.428374] fbsplash: console 2 using theme 'default' Sep 28 20:28:59 localhost [ 68.433030] fbsplash: switched splash state to 'on' on console 2 Sep 28 20:28:59 localhost [ 68.442040] fbsplash: console 3 using theme 'default' Sep 28 20:28:59 localhost [ 68.475820] fbsplash: switched splash state to 'on' on console 3 Sep 28 20:28:59 localhost [ 68.489916] fbsplash: console 4 using theme 'default' Sep 28 20:28:59 localhost [ 68.578063] fbsplash: switched splash state to 'on' on console 4 Sep 28 20:28:59 localhost [ 68.619431] fbsplash: console 5 using theme 'default' Sep 28 20:28:59 localhost [ 68.667722] fbsplash: switched splash state to 'on' on console 5 Sep 28 20:28:59 localhost [ 68.752906] fbsplash: console 11 using theme 'default' Sep 28 20:29:00 localhost [ 68.759905] fbsplash: switched splash state to 'on' on console 11 Sep 28 20:29:00 localhost dhcdbd: Started up. Sep 28 20:29:00 localhost (Engineering Build) (Apr 16 2006 22:29:10) [13312]: starting Sep 28 20:29:03 localhost NetworkManager: starting... Sep 28 20:29:03 localhost [ 71.842952] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 Sep 28 20:29:03 localhost NetworkManager: nm_system_device_get_system_config (): data good :-) Sep 28 20:29:03 localhost NetworkManager: nm_system_device_get_system_config (): Broadcast set to: 0.0.0.255 Sep 28 20:29:03 localhost NetworkManager: eth0: Device is fully-supported using driver 'via-rhine'. Sep 28 20:29:03 localhost NetworkManager: nm_device_init(): waiting for device's worker thread to start Sep 28 20:29:03 localhost NetworkManager: nm_device_init(): device's worker thread started, continuing. Sep 28 20:29:03 localhost NetworkManager: Now managing wired Ethernet (802.3) device 'eth0'. Sep 28 20:29:03 localhost NetworkManager: Deactivating device eth0. Sep 28 20:29:03 localhost dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason Sep 28 20:29:03 localhost NetworkManager: Will activate wired connection 'eth0' because it now has a link. Sep 28 20:29:03 localhost NetworkManager: SWITCH: no current connection, found better connection 'eth0'. Sep 28 20:29:03 localhost dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason Sep 28 20:29:03 localhost NetworkManager: Will activate connection 'eth0'. Sep 28 20:29:03 localhost NetworkManager: Device eth0 activation scheduled... Sep 28 20:29:03 localhost NetworkManager: Activation (eth0) started... Sep 28 20:29:03 localhost NetworkManager: Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled... Sep 28 20:29:03 localhost NetworkManager: Activation (eth0) Stage 1 of 5 (Device Prepare) started... Sep 28 20:29:03 localhost NetworkManager: Activation (eth0) Stage 2 of 5 (Device Configure) scheduled... Sep 28 20:29:03 localhost NetworkManager: Activation (eth0) Stage 1 of 5 (Device Prepare) complete. Sep 28 20:29:03 localhost NetworkManager: Activation (eth0) Stage 2 of 5 (Device Configure) starting... Sep 28 20:29:03 localhost NetworkManager: Activation (eth0) Stage 2 of 5 (Device Configure) successful. Sep 28 20:29:03 localhost NetworkManager: Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled. Sep 28 20:29:03 localhost NetworkManager: Activation (eth0) Stage 2 of 5 (Device Configure) complete. Sep 28 20:29:03 localhost NetworkManager: Activation (eth0) Stage 3 of 5 (IP Configure Start) started... Sep 28 20:29:04 localhost [ 73.176773] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. Sep 28 20:29:04 localhost [ 73.176991] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode Sep 28 20:29:04 localhost [ 73.177143] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode Sep 28 20:29:04 localhost NetworkManager: Activation (eth0) Beginning DHCP transaction. Sep 28 20:29:04 localhost NetworkManager: Activation (eth0) Stage 3 of 5 (IP Configure Start) complete. Sep 28 20:29:04 localhost NetworkManager: DHCP daemon state is now 12 (successfully started) for interface eth0 Sep 28 20:29:05 localhost NetworkManager: [1159468145.654338] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/computer_alsa_sequencer'). Sep 28 20:29:05 localhost udevd-event[13969]: udev_node_symlink: symlink(sound/sequencer, /dev/sequencer) failed: File exists Sep 28 20:29:05 localhost NetworkManager: [1159468145.682688] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/computer_oss_sequencer'). Sep 28 20:29:05 localhost NetworkManager: [1159468145.699606] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'). Sep 28 20:29:05 localhost NetworkManager: DHCP daemon state is now 1 (starting) for interface eth0 Sep 28 20:29:07 localhost NetworkManager: [1159468147.055978] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/pci_1102_4_oss_midi_0_2'). Sep 28 20:29:07 localhost NetworkManager: [1159468147.059879] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/pci_1102_4_oss_midi_0_3'). Sep 28 20:29:07 localhost dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67 Sep 28 20:29:08 localhost dhclient: DHCPACK from 10.109.184.1 Sep 28 20:29:08 localhost NetworkManager: DHCP daemon state is now 4 (reboot) for interface eth0 Sep 28 20:29:08 localhost NetworkManager: Activation (eth0) Stage 4 of 5 (IP Configure Get) scheduled... Sep 28 20:29:08 localhost NetworkManager: Activation (eth0) Stage 4 of 5 (IP Configure Get) started... Sep 28 20:29:08 localhost dhclient: bound to 213.47.192.123 -- renewal in 231887 seconds. Sep 28 20:29:08 localhost dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_domain Sep 28 20:29:08 localhost dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_servers Sep 28 20:29:08 localhost NetworkManager: Retrieved the following IP4 configuration from the DHCP daemon: Sep 28 20:29:08 localhost NetworkManager: address 213.47.192.123 Sep 28 20:29:08 localhost NetworkManager: netmask 255.255.255.0 Sep 28 20:29:08 localhost NetworkManager: broadcast 213.47.192.255 Sep 28 20:29:08 localhost NetworkManager: gateway 213.47.192.1 Sep 28 20:29:08 localhost NetworkManager: nameserver 195.34.133.21 Sep 28 20:29:08 localhost NetworkManager: nameserver 195.34.133.22 Sep 28 20:29:08 localhost NetworkManager: hostname '0015f29a9068' Sep 28 20:29:08 localhost NetworkManager: domain name 'telesystem.com' Sep 28 20:29:08 localhost NetworkManager: Activation (eth0) Stage 5 of 5 (IP Configure Commit) scheduled... Sep 28 20:29:08 localhost NetworkManager: Activation (eth0) Stage 4 of 5 (IP Configure Get) complete. Sep 28 20:29:08 localhost NetworkManager: Activation (eth0) Stage 5 of 5 (IP Configure Commit) started... Sep 28 20:29:10 localhost NetworkManager: Activation (eth0) Finish handler scheduled. Sep 28 20:29:10 localhost NetworkManager: Activation (eth0) successful, device activated. Sep 28 20:29:10 localhost NetworkManager: Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete. Sep 28 20:29:15 localhost kde(pam_unix)[13874]: session opened for user n0th by (uid=0) Sep 28 20:29:49 localhost su[14451]: Successful su for root by n0th Sep 28 20:29:49 localhost su[14451]: + pts/1 n0th:root Sep 28 20:29:49 localhost su(pam_unix)[14451]: session opened for user root by (uid=1000)