jvaubourg@frontend:~$ kaconsole3 -m paramount-21.rennes.grid5000.fr Connection to console [paramount-21] opened. Console [paramount-21] is currently disconnected from "ipmiconsole.exp". Console [paramount-21] connected to "ipmiconsole.exp" (pid 27559) at 03-26 16:00. Connection established via ipmiconsole (pid 27561). INIT: Switching to runlevel: 0 INIT: Sending processes the TERM signal Stopping periodic command scheduler: cron. Stopping CPU Frequency daemon: cpufreqd. Removing mx driver [ 288.400088] mx INFO: handoff to eeprom rll|bpn|blbllbnbnnb`blllnlbn|`nnrlpnnnnnprbnnrpnnb|bbnnnpl||||||||||||||||||||||||||||||||||||rlpnnnnnprbnnrlnnbb|bbnnnplbb|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||blLinux version 2.6.31.4 (root@paradent-1.rennes.grid5000.fr) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Thu Oct 22 14:02:37 CEST 2009 Command line: initrd=kernels/deploy-initrd-2.6.31.4-dell1950 ETH_DEV=eth0 DISK_DRV=megaraid_sas console=tty0 console=ttyS1,57600n8 ramdisk_size=260000 rw init=/linuxrc BOOT_IMAGE=kernels/deploy-vmlinuz-2.6.31.4-dell1950 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 00000000cffa8000 (usable) BIOS-e820: 00000000cffa8000 - 00000000cffb7c00 (ACPI data) BIOS-e820: 00000000cffb7c00 - 00000000d0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000230000000 (usable) DMI 2.4 present. last_pfn = 0x230000 max_arch_pfn = 0x400000000 last_pfn = 0xcffa8 max_arch_pfn = 0x400000000 init_memory_mapping: 0000000000000000-00000000cffa8000 init_memory_mapping: 0000000100000000-0000000230000000 RAMDISK: 7cecc000 - 7ffff55a (8 early reservations) ==> bootmem [0000000000 - 0230000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001616ac0] TEXT DATA BSS ==> [0001000000 - 0001616ac0] #3 [007cecc000 - 007ffff55a] RAMDISK ==> [007cecc000 - 007ffff55a] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] #5 [0001617000 - 0001617234] BRK ==> [0001617000 - 0001617234] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] #7 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000] found SMP MP-table at [ffff8800000fe710] fe710 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00230000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x000000a0 0: 0x00000100 -> 0x000cffa8 0: 0x00100000 -> 0x00230000 Intel MultiProcessor Specification v1.4 MPTABLE: OEM ID: DELL MPTABLE: Product ID: PE 01B3 MPTABLE: APIC at: 0xFEE00000 Processor #0 (Bootup-CPU) Processor #1 Processor #7 Processor #6 I/O APIC #8 Version 32 at 0xFEC00000. I/O APIC #9 Version 32 at 0xFEC81000. Processors: 4 SMP: Allowing 4 CPUs, 0 hotplug CPUs Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 25 pages at ffff880028034000, static data 72672 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065499 Kernel command line: initrd=kernels/deploy-initrd-2.6.31.4-dell1950 ETH_DEV=eth0 DISK_DRV=megaraid_sas console=tty0 console=ttyS1,57600n8 ramdisk_size=260000 rw init=/linuxrc BOOT_IMAGE=kernels/deploy-vmlinuz-2.6.31.4-dell1950 PID hash table entries: 4096 (order: 12, 32768 bytes) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 8134596k/9175040k available (2754k kernel code, 787168k absent, 252312k reserved, 2206k data, 316k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 NR_IRQS:2304 Fast TSC calibration using PIT Detected 2327.502 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS1] enabled Calibrating delay loop (skipped), value calculated using timer frequency.. 4655.00 BogoMIPS (lpj=9310008) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using mwait in idle threads. Setting APIC routing to flat ExtINT not setup in hardware but reported by MP table ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 CPU0: Intel(R) Xeon(R) CPU 5148 @ 2.33GHz stepping 06 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4655.29 BogoMIPS (lpj=9310596) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Intel(R) Xeon(R) CPU 5148 @ 2.33GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2 APIC 0x7 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 4655.34 BogoMIPS (lpj=9310694) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 3 CPU: Processor Core ID: 1 CPU2: Intel(R) Xeon(R) CPU 5148 @ 2.33GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3 APIC 0x6 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 4655.35 BogoMIPS (lpj=9310704) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU3: Intel(R) Xeon(R) CPU 5148 @ 2.33GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (18621.00 BogoMIPS). NET: Registered protocol family 16 PCI: Using configuration type 1 for base access PCI: Dell PowerEdge 1950 detected, enabling pci=bfsort. bio: create slab at 0 PCI: Probing PCI hardware pci 0000:00:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:00.0: PME# disabled pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:06:00.0: PME# supported from D0 D3hot D3cold pci 0000:06:00.0: PME# disabled pci 0000:06:00.3: PME# supported from D0 D3hot D3cold pci 0000:06:00.3: PME# disabled pci 0000:07:00.0: PME# supported from D0 D3hot D3cold pci 0000:07:00.0: PME# disabled pci 0000:07:01.0: PME# supported from D0 D3hot D3cold pci 0000:07:01.0: PME# disabled pci 0000:08:00.0: PME# supported from D0 D3hot D3cold pci 0000:08:00.0: PME# disabled pci 0000:09:00.0: PME# supported from D3hot D3cold pci 0000:09:00.0: PME# disabled pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:01:00.2: PME# supported from D0 D3hot D3cold pci 0000:01:00.2: PME# disabled pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:05:00.0: PME# supported from D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:2670] HPET: 3 timers in total, 0 timers will be used for per-cpu timer pci 0000:08:00.0: PCI bridge, secondary bus 0000:09 pci 0000:08:00.0: IO window: disabled pci 0000:08:00.0: MEM window: 0xf4000000-0xf7ffffff pci 0000:08:00.0: PREFETCH window: disabled pci 0000:07:00.0: PCI bridge, secondary bus 0000:08 pci 0000:07:00.0: IO window: disabled pci 0000:07:00.0: MEM window: 0xf4000000-0xf7ffffff pci 0000:07:00.0: PREFETCH window: disabled pci 0000:07:01.0: PCI bridge, secondary bus 0000:0a pci 0000:07:01.0: IO window: disabled pci 0000:07:01.0: MEM window: disabled pci 0000:07:01.0: PREFETCH window: disabled pci 0000:06:00.0: PCI bridge, secondary bus 0000:07 pci 0000:06:00.0: IO window: disabled pci 0000:06:00.0: MEM window: 0xf4000000-0xf7ffffff pci 0000:06:00.0: PREFETCH window: disabled pci 0000:06:00.3: PCI bridge, secondary bus 0000:0b pci 0000:06:00.3: IO window: disabled pci 0000:06:00.3: MEM window: disabled pci 0000:06:00.3: PREFETCH window: disabled pci 0000:00:02.0: PCI bridge, secondary bus 0000:06 pci 0000:00:02.0: IO window: disabled pci 0000:00:02.0: MEM window: 0xf2000000-0xf7ffffff pci 0000:00:02.0: PREFETCH window: disabled pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 pci 0000:01:00.0: IO window: disabled pci 0000:01:00.0: MEM window: 0xfc600000-0xfc7fffff pci 0000:01:00.0: PREFETCH window: 0x000000d9000000-0x000000d90fffff pci 0000:01:00.2: PCI bridge, secondary bus 0000:03 pci 0000:01:00.2: IO window: disabled pci 0000:01:00.2: MEM window: disabled pci 0000:01:00.2: PREFETCH window: disabled pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 pci 0000:00:03.0: IO window: disabled pci 0000:00:03.0: MEM window: 0xfc500000-0xfc7fffff pci 0000:00:03.0: PREFETCH window: 0x000000d9000000-0x000000d90fffff pci 0000:00:04.0: PCI bridge, secondary bus 0000:0c pci 0000:00:04.0: IO window: disabled pci 0000:00:04.0: MEM window: disabled pci 0000:00:04.0: PREFETCH window: disabled pci 0000:00:05.0: PCI bridge, secondary bus 0000:0d pci 0000:00:05.0: IO window: disabled pci 0000:00:05.0: MEM window: disabled pci 0000:00:05.0: PREFETCH window: disabled pci 0000:00:06.0: PCI bridge, secondary bus 0000:0e pci 0000:00:06.0: IO window: disabled pci 0000:00:06.0: MEM window: 0xfc300000-0xfc4fffff pci 0000:00:06.0: PREFETCH window: 0x000000d8000000-0x000000d8ffffff pci 0000:00:07.0: PCI bridge, secondary bus 0000:0f pci 0000:00:07.0: IO window: disabled pci 0000:00:07.0: MEM window: disabled pci 0000:00:07.0: PREFETCH window: disabled pci 0000:04:00.0: PCI bridge, secondary bus 0000:05 pci 0000:04:00.0: IO window: disabled pci 0000:04:00.0: MEM window: 0xf8000000-0xfbffffff pci 0000:04:00.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: 0xf8000000-0xfbffffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:10 pci 0000:00:1e.0: IO window: 0xe000-0xefff pci 0000:00:1e.0: MEM window: 0xfc100000-0xfc2fffff pci 0000:00:1e.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 16 pci 0000:06:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16 pci 0000:07:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16 pci 0000:07:01.0: PCI->APIC IRQ transform: INT A -> IRQ 16 pci 0000:00:03.0: PCI->APIC IRQ transform: INT A -> IRQ 16 pci 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 16 pci 0000:00:06.0: PCI->APIC IRQ transform: INT A -> IRQ 16 pci 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 16 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 50381k freed platform rtc_cmos: registered platform RTC device (no PNP device found) HugeTLB registered 2 MB page size, pre-allocated 0 pages DLM (built Oct 22 2009 14:02:21) installed ROMFS MTD (C) 2007 Red Hat, Inc. Btrfs loaded msgmni has been set to 15988 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module loaded Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.1 (May 6, 2009) bnx2 0000:05:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16 bnx2 0000:05:00.0: firmware: using built-in firmware bnx2/bnx2-mips-06-4.6.16.fw bnx2 0000:05:00.0: firmware: using built-in firmware bnx2/bnx2-rv2p-06-4.6.16.fw eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:19:b9:e9:03:5b bnx2 0000:09:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16 bnx2 0000:09:00.0: firmware: using built-in firmware bnx2/bnx2-mips-06-4.6.16.fw bnx2 0000:09:00.0: firmware: using built-in firmware bnx2/bnx2-rv2p-06-4.6.16.fw eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 00:19:b9:e9:03:5d Broadcom NetXtreme II CNIC Driver cnic v2.0.0 (May 21, 2009) cnic: Added CNIC device: eth0 cnic: Added CNIC device: eth1 console [netcon0] enabled netconsole: network logging started I2O subsystem v1.325 i2o: max drivers = 8 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 114 bytes nvram, hpet irqs NET: Registered protocol family 26 TCP cubic registered SCTP: Hash tables configured (established 65536 bind 65536) rtc_cmos rtc_cmos: setting system clock to 2010-03-26 16:03:30 UTC (1269619410) BIOS EDD facility v0.16 2004-Jun-25, 0 devices found EDD information not available. RAMDISK: gzip image found at block 0 VFS: Mounted root (ext2 filesystem) on device 1:0. Freeing unused kernel memory: 316k freed info, eth0: dhcpcd 3.2.3 starting bnx2: eth0: using MSI info, eth0: hardware address = 00:19:b9:e9:03:5b info, eth0: DUID = 00:01:00:01:13:3f:3d:91:00:19:b9:e9:03:5b NET: Registered protocol family 17 info, eth0: broadcasting for a lease debug, eth0: sending DHCP_DISCOVER with xid 0x31f0acd2 debug, eth0: waiting for 200 seconds debug, eth0: sending DHCP_DISCOVER with xid 0x31f0acd2 bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex debug, eth0: sending DHCP_DISCOVER with xid 0x31f0acd2 debug, eth0: got a packet with xid 0x31f0acd2 info, eth0: offered 131.254.202.191 from 131.254.202.4 debug, eth0: sending DHCP_REQUEST with xid 0x31f0acd2 debug, eth0: waiting for 194 seconds debug, eth0: got a packet with xid 0x31f0acd2 info, eth0: checking 131.254.202.191 is available on attached networks debug, eth0: sending ARP probe #1 debug, eth0: sending ARP probe #2 debug, eth0: sending ARP probe #3 debug, eth0: sending ARP claim #1 debug, eth0: sending ARP claim #2 info, eth0: leased 131.254.202.191 for 43200 seconds debug, eth0: renew in 21600 seconds debug, eth0: rebind in 37800 seconds info, eth0: adding IP address 131.254.202.191/23 info, eth0: adding default roSCSI subsystem initialized ute via 131.254.202.1 metric 0 megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 debug, eth0: no megasas: 0x1028:0x0015:0x1028:0x1f03: dns information bus 2:slot 14:func 0 to write info, megaraid_sas 0000:02:0e.0: PCI->APIC IRQ transform: INT A -> IRQ 38 eth0: setting hostname to `paramount-21' debug,megasas: FW now in Ready state eth0: writing /var/lib/dhcpcd/dhcpcd-eth0.info debug, eth0: exec "/etc/dhcpcd.sh" "/var/lib/dhcpcd/dhcpcd-eth0.info" "new" debug, eth0: forking to background info, eth0: exiting dhcpcd.sh: interface eth0 has been configured with new IPscsi0 : LSI SAS based MegaRAID driver =131.254.202.191scsi 0:0:0:0: Direct-Access SEAGATE ST3300555SS T107 PQ: 0 ANSI: 5 Loading specifUniform Multi-Platform E-IDE driver ied disk driver:ide-gd driver 1.18 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports megaraid_sas scsi 0:0:1:0: Direct-Access SEAGATE ST3300555SS T107 PQ: 0 ANSI: 5 Setting parameters of disc: (nonscsi 0:0:8:0: Enclosure DP BACKPLANE 1.05 PQ: 0 ANSI: 5 e). Setting the system clock. Cannot access the Hardware Clock via scsi 0:2:0:0: Direct-Access DELL PERC 5/i 1.03 PQ: 0 ANSI: 5 any known method. Use the --debug option to see the details of our search for an access method.sd 0:2:0:0: [sda] 1169686528 512-byte logical blocks: (598 GB/557 GiB) Unable to set sd 0:2:0:0: [sda] Write Protect is off System Clock to:sd 0:2:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA Fri Mar 26 16:0 sda:3:40 UTC 2010 (warning). Activatin sda1g swap...done. sda2Setting the syst sda3em clock. Canno sda4t access the Har the details of our search for an access method.sd 0:2:0:0: [sda] Attached SCSI disk Unable to set System Clock to: Fri Mar 26 16:03:40 UTC 2010 (warning). Cleaning up ifupdown.... Loading kernel modules...done. Checking file systems...fsck 1.41.3 (12-Oct-2008) done. Setting kernel variables (/etc/sysctl.conf)...done. Mounting local filesystems...done. Activating swapfile swap...done. Setting up networking.... Configuring network interfaces...done. INIT: Entering runlevel: 2 Starting enhanced syslogd: rsyslogd. Starting OpenBSD Secure Shell server: sshd. sda: sda1 sda2 sda3 sda4 < sda5 > sda: sda1 sda2 sda3 sda4 < sda5 > kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with writeback data mode. Restarting system. machine restart rll|bpn|blbllbnbnnb`blllnlbn|`nnrlnn|bbbl[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32myrinet (2.6.32) (root@gdx-208.orsay.grid5000.fr) (gcc version 4.4.3 20100108 (prerelease) (Debian 4.4.2-9) ) #1 SMP Fri Feb 12 14:14:08 CET 2010 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32myrinet console=tty0 console=ttyS1,57600n8 root=/dev/sda3 ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffa8000 (usable) [ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffb7c00 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffb7c00 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] last_pfn = 0xcffa8 max_arch_pfn = 0x400000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cffa8000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000 [ 0.000000] RAMDISK: 37862000 - 37feff01 [ 0.000000] ACPI: RSDP 00000000000f2620 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000000f26a0 0004C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: FACP 00000000000f27a8 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: DSDT 00000000cffa8000 03C53 (v01 DELL PE_SC3 00000001 MSFT 0100000E) [ 0.000000] ACPI: FACS 00000000cffb7c00 00040 [ 0.000000] ACPI: APIC 00000000000f289c 000C8 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SPCR 00000000000f297d 00050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: HPET 00000000000f29cd 00038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: MCFG 00000000000f2a05 0003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000230000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000 [ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff] [ 0.000000] bootmap [0000000000011000 - 0000000000056fff] pages 46 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0230000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00015ba494] TEXT DATA BSS ==> [0001000000 - 00015ba494] [ 0.000000] #3 [0037862000 - 0037feff01] RAMDISK ==> [0037862000 - 0037feff01] [ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] [ 0.000000] #5 [00015bb000 - 00015bb234] BRK ==> [00015bb000 - 00015bb234] [ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #7 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000] [ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00230000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x000cffa8 [ 0.000000] 0: 0x00100000 -> 0x00230000 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[64]) [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec81000, GSI 64-87 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cffb7000 [ 0.000000] PM: Registered nosave memory: 00000000cffb7000 - 00000000cffb8000 [ 0.000000] PM: Registered nosave memory: 00000000cffb8000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000 [ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880028200000 s79576 r8192 d22824 u262144 [ 0.000000] pcpu-alloc: s79576 r8192 d22824 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065499 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32myrinet console=tty0 console=ttyS1,57600n8 root=/dev/sda3 ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 8190356k/9175040k available (2746k kernel code, 787168k absent, 197516k reserved, 1697k data, 584k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1280 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS1] enabled [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2327.481 MHz processor. [ 0.012006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4654.96 BogoMIPS (lpj=9309924) [ 0.020042] Security Framework initialized [ 0.024007] SELinux: Disabled at boot. [ 0.028661] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.037988] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.041922] Mount-cache hash table entries: 256 [ 0.044147] Initializing cgroup subsys ns [ 0.048007] Initializing cgroup subsys cpuacct [ 0.052006] Initializing cgroup subsys devices [ 0.056029] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.064003] CPU: L2 cache: 4096K [ 0.068004] CPU 0/0x0 -> Node 0 [ 0.072003] CPU: Physical Processor ID: 0 [ 0.076003] CPU: Processor Core ID: 0 [ 0.080004] mce: CPU supports 6 MCE banks [ 0.084008] CPU0: Thermal monitoring enabled (TM1) [ 0.088005] using mwait in idle threads. [ 0.092003] Performance Events: Core2 events, Intel PMU driver. [ 0.104004] ... version: 2 [ 0.108003] ... bit width: 40 [ 0.112003] ... generic registers: 2 [ 0.116003] ... value mask: 000000ffffffffff [ 0.120003] ... max period: 000000007fffffff [ 0.124003] ... fixed-purpose events: 3 [ 0.128003] ... event mask: 0000000700000003 [ 0.132902] ACPI: Core revision 20090903 [ 0.142899] Setting APIC routing to flat [ 0.144444] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.190953] CPU0: Intel(R) Xeon(R) CPU 5148 @ 2.33GHz stepping 06 [ 0.204001] Booting processor 1 APIC 0x6 ip 0x6000 [ 0.016000] Initializing CPU#1 [ 0.016000] Calibrating delay using timer specific routine.. 4655.00 BogoMIPS (lpj=9310017) [ 0.016000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.016000] CPU: L2 cache: 4096K [ 0.016000] CPU 1/0x6 -> Node 0 [ 0.016000] CPU: Physical Processor ID: 3 [ 0.016000] CPU: Processor Core ID: 0 [ 0.016000] CPU1: Thermal monitoring enabled (TM2) [ 0.296087] CPU1: Intel(R) Xeon(R) CPU 5148 @ 2.33GHz stepping 06 [ 0.308005] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.312146] Booting processor 2 APIC 0x1 ip 0x6000 [ 0.016000] Initializing CPU#2 [ 0.016000] Calibrating delay using timer specific routine.. 4655.00 BogoMIPS (lpj=9310013) [ 0.016000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.016000] CPU: L2 cache: 4096K [ 0.016000] CPU 2/0x1 -> Node 0 [ 0.016000] CPU: Physical Processor ID: 0 [ 0.016000] CPU: Processor Core ID: 1 [ 0.016000] CPU2: Thermal monitoring enabled (TM2) [ 0.408081] CPU2: Intel(R) Xeon(R) CPU 5148 @ 2.33GHz stepping 06 [ 0.420005] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.424192] Booting processor 3 APIC 0x7 ip 0x6000 [ 0.016000] Initializing CPU#3 [ 0.016000] Calibrating delay using timer specific routine.. 4655.00 BogoMIPS (lpj=9310008) [ 0.016000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.016000] CPU: L2 cache: 4096K [ 0.016000] CPU 3/0x7 -> Node 0 [ 0.016000] CPU: Physical Processor ID: 3 [ 0.016000] CPU: Processor Core ID: 1 [ 0.016000] CPU3: Thermal monitoring enabled (TM2) [ 0.520036] CPU3: Intel(R) Xeon(R) CPU 5148 @ 2.33GHz stepping 06 [ 0.532005] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.536053] Brought up 4 CPUs [ 0.540003] Total of 4 processors activated (18619.98 BogoMIPS). [ 0.548424] NET: Registered protocol family 16 [ 0.552053] ACPI: bus type pci registered [ 0.556051] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.560004] PCI: MCFG area at e0000000 reserved in E820 [ 0.573555] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.576003] PCI: Using configuration type 1 for base access [ 0.580003] PCI: Dell PowerEdge 1950 detected, enabling pci=bfsort. [ 0.588079] bio: create slab at 0 [ 0.597238] ACPI: Interpreter enabled [ 0.600006] ACPI: (supports S0 S4 S5) [ 0.608004] ACPI: Using IOAPIC for interrupt routing [ 0.620161] ACPI: No dock devices found. [ 0.624158] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.628065] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.632005] pci 0000:00:00.0: PME# disabled [ 0.636048] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.640004] pci 0000:00:02.0: PME# disabled [ 0.644043] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.648005] pci 0000:00:03.0: PME# disabled [ 0.652045] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.656004] pci 0000:00:04.0: PME# disabled [ 0.660042] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.664005] pci 0000:00:05.0: PME# disabled [ 0.668044] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.672004] pci 0000:00:06.0: PME# disabled [ 0.676043] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.680005] pci 0000:00:07.0: PME# disabled [ 0.684226] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.688005] pci 0000:00:1c.0: PME# disabled [ 0.692248] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.696006] pci 0000:00:1d.7: PME# disabled [ 0.704231] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.708050] pci 0000:06:00.0: PME# disabled [ 0.713609] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold [ 0.716005] pci 0000:06:00.3: PME# disabled [ 0.725880] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.728050] pci 0000:07:00.0: PME# disabled [ 0.737193] pci 0000:07:01.0: PME# supported from D0 D3hot D3cold [ 0.740052] pci 0000:07:01.0: PME# disabled [ 0.748276] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.752050] pci 0000:08:00.0: PME# disabled [ 0.762888] pci 0000:09:00.0: PME# supported from D3hot D3cold [ 0.764050] pci 0000:09:00.0: PME# disabled [ 0.777878] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.780005] pci 0000:01:00.0: PME# disabled [ 0.784054] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold [ 0.788005] pci 0000:01:00.2: PME# disabled [ 0.792752] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.796006] pci 0000:04:00.0: PME# disabled [ 0.800165] pci 0000:05:00.0: PME# supported from D3hot D3cold [ 0.804006] pci 0000:05:00.0: PME# disabled [ 0.808205] pci 0000:00:1e.0: transparent bridge [ 0.820103] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 *5 6 7 10 11 12) [ 0.831270] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 0.839291] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 *6 7 10 11 12) [ 0.844744] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 10 *11 12) [ 0.854637] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12) [ 0.864518] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12) [ 0.874062] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 0.884518] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 0.898449] vgaarb: device added: PCI:0000:10:0d.0,decodes=io+mem,owns=io+mem,locks=none [ 0.900005] vgaarb: loaded [ 0.904053] usbcore: registered new interface driver usbfs [ 0.908040] usbcore: registered new interface driver hub [ 0.912044] usbcore: registered new device driver usb [ 0.916052] PCI: Using ACPI for IRQ routing [ 0.920594] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.925965] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.940007] Switching to clocksource tsc [ 0.945381] pnp: PnP ACPI init [ 0.951549] ACPI: bus type pnp registered [ 0.965088] pnp: PnP ACPI: found 12 devices [ 0.973489] ACPI: ACPI bus type pnp unregistered [ 0.982769] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.995506] system 00:08: ioport range 0x880-0x8bf has been reserved [ 1.008244] system 00:08: ioport range 0x8c0-0x8df has been reserved [ 1.020982] system 00:08: ioport range 0x8e0-0x8e3 has been reserved [ 1.033721] system 00:08: ioport range 0xc00-0xc7f has been reserved [ 1.046458] system 00:08: ioport range 0xca0-0xca7 has been reserved [ 1.059194] system 00:08: ioport range 0xca9-0xcab has been reserved [ 1.071930] system 00:08: ioport range 0xcad-0xcaf has been reserved [ 1.084670] system 00:09: ioport range 0xca8-0xca8 has been reserved [ 1.097407] system 00:09: ioport range 0xcac-0xcac has been reserved [ 1.110146] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 1.130990] pci 0000:08:00.0: PCI bridge, secondary bus 0000:09 [ 1.142863] pci 0000:08:00.0: IO window: disabled [ 1.152742] pci 0000:08:00.0: MEM window: 0xf4000000-0xf7ffffff [ 1.165004] pci 0000:08:00.0: PREFETCH window: disabled [ 1.175878] pci 0000:07:00.0: PCI bridge, secondary bus 0000:08 [ 1.187746] pci 0000:07:00.0: IO window: disabled [ 1.197624] pci 0000:07:00.0: MEM window: 0xf4000000-0xf7ffffff [ 1.209886] pci 0000:07:00.0: PREFETCH window: disabled [ 1.220761] pci 0000:07:01.0: PCI bridge, secondary bus 0000:0a [ 1.232630] pci 0000:07:01.0: IO window: disabled [ 1.242510] pci 0000:07:01.0: MEM window: disabled [ 1.252516] pci 0000:07:01.0: PREFETCH window: disabled [ 1.263391] pci 0000:06:00.0: PCI bridge, secondary bus 0000:07 [ 1.275261] pci 0000:06:00.0: IO window: disabled [ 1.285138] pci 0000:06:00.0: MEM window: 0xf4000000-0xf7ffffff [ 1.297401] pci 0000:06:00.0: PREFETCH window: disabled [ 1.308278] pci 0000:06:00.3: PCI bridge, secondary bus 0000:0b [ 1.320149] pci 0000:06:00.3: IO window: disabled [ 1.329981] pci 0000:06:00.3: MEM window: disabled [ 1.339943] pci 0000:06:00.3: PREFETCH window: disabled [ 1.350815] pci 0000:00:02.0: PCI bridge, secondary bus 0000:06 [ 1.362684] pci 0000:00:02.0: IO window: disabled [ 1.372472] pci 0000:00:02.0: MEM window: 0xf2000000-0xf7ffffff [ 1.384694] pci 0000:00:02.0: PREFETCH window: disabled [ 1.395522] pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 [ 1.407391] pci 0000:01:00.0: IO window: disabled [ 1.417178] pci 0000:01:00.0: MEM window: 0xfc600000-0xfc7fffff [ 1.429395] pci 0000:01:00.0: PREFETCH window: 0x000000d9000000-0x000000d90fffff [ 1.445262] pci 0000:01:00.2: PCI bridge, secondary bus 0000:03 [ 1.457132] pci 0000:01:00.2: IO window: disabled [ 1.466919] pci 0000:01:00.2: MEM window: disabled [ 1.476880] pci 0000:01:00.2: PREFETCH window: disabled [ 1.487707] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 [ 1.499576] pci 0000:00:03.0: IO window: disabled [ 1.509363] pci 0000:00:03.0: MEM window: 0xfc500000-0xfc7fffff [ 1.521580] pci 0000:00:03.0: PREFETCH window: 0x000000d9000000-0x000000d90fffff [ 1.536761] pci 0000:00:04.0: PCI bridge, secondary bus 0000:0c [ 1.548631] pci 0000:00:04.0: IO window: disabled [ 1.558417] pci 0000:00:04.0: MEM window: disabled [ 1.568378] pci 0000:00:04.0: PREFETCH window: disabled [ 1.579207] pci 0000:00:05.0: PCI bridge, secondary bus 0000:0d [ 1.591074] pci 0000:00:05.0: IO window: disabled [ 1.600861] pci 0000:00:05.0: MEM window: disabled [ 1.610822] pci 0000:00:05.0: PREFETCH window: disabled [ 1.621649] pci 0000:00:06.0: PCI bridge, secondary bus 0000:0e [ 1.633516] pci 0000:00:06.0: IO window: disabled [ 1.643303] pci 0000:00:06.0: MEM window: 0xfc300000-0xfc4fffff [ 1.655519] pci 0000:00:06.0: PREFETCH window: 0x000000d8000000-0x000000d8ffffff [ 1.670701] pci 0000:00:07.0: PCI bridge, secondary bus 0000:0f [ 1.682570] pci 0000:00:07.0: IO window: disabled [ 1.692357] pci 0000:00:07.0: MEM window: disabled [ 1.702317] pci 0000:00:07.0: PREFETCH window: disabled [ 1.713146] pci 0000:04:00.0: PCI bridge, secondary bus 0000:05 [ 1.725014] pci 0000:04:00.0: IO window: disabled [ 1.734805] pci 0000:04:00.0: MEM window: 0xf8000000-0xfbffffff [ 1.747022] pci 0000:04:00.0: PREFETCH window: disabled [ 1.757853] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 [ 1.769721] pci 0000:00:1c.0: IO window: disabled [ 1.779509] pci 0000:00:1c.0: MEM window: 0xf8000000-0xfbffffff [ 1.791725] pci 0000:00:1c.0: PREFETCH window: disabled [ 1.802558] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:10 [ 1.814427] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 1.825083] pci 0000:00:1e.0: MEM window: 0xfc100000-0xfc2fffff [ 1.837299] pci 0000:00:1e.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff [ 1.852492] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.866067] pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.879773] pci 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.893800] pci 0000:07:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.907555] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.921008] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.934452] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.947897] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.961450] NET: Registered protocol family 2 [ 1.970477] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 1.986680] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 2.005367] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.019281] TCP: Hash tables configured (established 524288 bind 65536) [ 2.032539] TCP reno registered [ 2.039046] NET: Registered protocol family 1 [ 2.047964] Trying to unpack rootfs image as initramfs... [ 2.220607] Freeing initrd memory: 7735k freed [ 2.235404] audit: initializing netlink socket (disabled) [ 2.246257] type=2000 audit(1269619665.244:1): initialized [ 2.257936] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.271061] VFS: Disk quotas dquot_6.5.2 [ 2.278971] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.291937] msgmni has been set to 16011 [ 2.300105] alg: No test for stdrng (krng) [ 2.308433] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.323268] io scheduler noop registered [ 2.331146] io scheduler anticipatory registered [ 2.340413] io scheduler deadline registered [ 2.349000] io scheduler cfq registered (default) [ 2.376535] Linux agpgart interface v0.103 [ 2.384763] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.397481] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.409671] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.422224] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.433624] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.447759] brd: module loaded [ 2.453999] input: Macintosh mouse button emulation as /class/input/input0 [ 2.468201] PNP: No PS/2 controller found. Probing ports directly. [ 2.483387] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.493354] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.503770] mice: PS/2 mouse device common for all mice [ 2.514317] Driver 'rtc_cmos' needs updating - please use bus_type methods [ 2.528117] rtc_cmos 00:04: RTC can wake from S4 [ 2.537463] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.549712] rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 2.563030] cpuidle: using governor ladder [ 2.571257] cpuidle: using governor menu [ 2.579138] No iBFT detected. [ 2.585406] TCP cubic registered [ 2.591899] NET: Registered protocol family 17 [ 2.601033] registered taskstats version 1 [ 2.613547] rtc_cmos 00:04: setting system clock to 2010-03-26 16:07:48 UTC (1269619668) [ 2.629820] Freeing unused kernel memory: 584k freed Loading, please wait... Begin: Loading essential drivers ... [ 2.723610] Uniform Multi-Platform E-IDE driver [ 2.736389] ide-gd driver 1.18 [ 2.744091] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 2.774926] SCSI subsystem initialized [ 2.793516] Fusion MPT base driver 3.04.12 [ 2.801745] Copyright (c) 1999-2008 LSI Corporation [ 2.816808] Fusion MPT SPI Host driver 3.04.12 [ 2.856061] Fusion MPT SAS Host driver 3.04.12 [ 2.867722] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 [ 2.879437] megasas: 0x1028:0x0015:0x1028:0x1f03: bus 2:slot 14:func 0 [ 2.892597] megaraid_sas 0000:02:0e.0: PCI INT A -> GSI 78 (level, low) -> IRQ 78 [ 2.907694] megasas: FW now in Ready state [ 2.956098] scsi0 : LSI SAS based MegaRAID driver [ 2.967131] scsi 0:0:0:0: Direct-Access SEAGATE ST3300555SS T107 PQ: 0 ANSI: 5 [ 2.984495] scsi 0:0:1:0: Direct-Access SEAGATE ST3300555SS T107 PQ: 0 ANSI: 5 [ 2.987105] HP CISS Driver (v 3.6.20) [ 3.012197] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 3.024080] e1000e: Copyright (c) 1999-2008 Intel Corporation. done. Begin: Running /scripts/init-premount ... [ 3.064217] scsi 0:0:8:0: Enclosure DP BACKPLANE 1.05 PQ: 0 ANSI: 5 [ 3.098260] scsi 0:2:0:0: Direct-Access DELL PERC 5/i 1.03 PQ: 0 ANSI: 5 [ 3.103059] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009) [ 3.103088] bnx2 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.111156] input: Power Button as /class/input/input1 [ 3.111162] ACPI: Power Button [PWRF] [ 3.117077] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.117120] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 3.145327] dca service started, version 1.12.1 [ 3.147742] myri10ge: Version 1.5.1-1.451 [ 3.147795] myri10ge 0000:0e:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.221809] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.222374] myri10ge 0000:0e:00.0: firmware: requesting myri10ge_eth_z8e.dat [ 3.246535] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 3.261413] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.274400] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfc800000 [ 3.296688] sd 0:2:0:0: [sda] 1169686528 512-byte logical blocks: (598 GB/557 GiB) [ 3.300291] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.300316] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.300318] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.300320] usb usb1: Product: EHCI Host Controller [ 3.300322] usb usb1: Manufacturer: Linux 2.6.32myrinet ehci_hcd [ 3.300323] usb usb1: SerialNumber: 0000:00:1d.7 [ 3.300377] usb usb1: configuration #1 chosen from 1 choice [ 3.300407] hub 1-0:1.0: USB hub found [ 3.300414] hub 1-0:1.0: 6 ports detected [ 3.300497] piix 0000:00:1f.1: IDE controller (0x8086:0x269e rev 0x09) [ 3.300509] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.300524] piix 0000:00:1f.1: IDE port disabled [ 3.300534] piix 0000:00:1f.1: not 100% native mode: will probe irqs later [ 3.300541] ide0: BM-DMA at 0xfc00-0xfc07 [ 3.327265] uhci_hcd: USB Universal Host Controller Interface driver [ 3.356049] myri10ge 0000:0e:00.0: firmware: requesting myri10ge_eth_z8e.dat [ 3.495442] sd 0:2:0:0: [sda] Write Protect is off [ 3.505174] sd 0:2:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 3.526566] sda: sda1 sda2 sda3 sda4 < sda5 > [ 3.558202] sd 0:2:0:0: [sda] Attached SCSI disk [ 3.564531] myri10ge 0000:0e:00.0: MSI IRQ 97, tx bndry 4096, fw myri10ge_eth_z8e.dat, WC Enabled [ 3.585288] ses 0:0:8:0: Attached Enclosure device [ 3.700329] bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-mips-06-5.0.0.j3.fw [ 3.704058] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 3.732363] bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-rv2p-06-5.0.0.j3.fw [ 3.750343] eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:19:b9:e9:03:5b [ 3.776120] bnx2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.836446] usb 1-1: New USB device found, idVendor=413c, idProduct=a001 [ 3.849892] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.864270] usb 1-1: configuration #1 chosen from 1 choice [ 3.875474] hub 1-1:1.0: USB hub found [ 3.883060] hub 1-1:1.0: 2 ports detected [ 4.000365] usb 1-5: new high speed USB device using ehci_hcd and address 3 [ 4.040228] hda: TEAC CD-ROM CD-224E-N, ATAPI CD/DVD-ROM drive [ 4.148451] usb 1-5: New USB device found, idVendor=04b4, idProduct=6560 [ 4.161886] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.176256] usb 1-5: configuration #1 chosen from 1 choice [ 4.187357] hub 1-5:1.0: USB hub found [ 4.194942] hub 1-5:1.0: 4 ports detected [ 4.276069] usb 1-1.1: new full speed USB device using ehci_hcd and address 4 [ 4.304057] bnx2 0000:09:00.0: firmware: requesting bnx2/bnx2-mips-06-5.0.0.j3.fw [ 4.322011] bnx2 0000:09:00.0: firmware: requesting bnx2/bnx2-rv2p-06-5.0.0.j3.fw [ 4.339903] eth2: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 00:19:b9:e9:03:5d [ 4.390565] usb 1-1.1: New USB device found, idVendor=413c, idProduct=0000 [ 4.404350] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.419008] usb 1-1.1: Product: DRAC5 [ 4.426365] usb 1-1.1: Manufacturer: Dell [ 4.434417] usb 1-1.1: SerialNumber: 0000000 [ 4.443052] usb 1-1.1: configuration #1 chosen from 1 choice [ 4.462946] usbcore: registered new interface driver hiddev [ 4.475673] input: Dell DRAC5 as /class/input/input2 [ 4.485699] generic-usb 0003:413C:0000.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell DRAC5] on usb-0000:00:1d.7-1.1/input0 [ 4.509791] input: Dell DRAC5 as /class/input/input3 [ 4.519823] generic-usb 0003:413C:0000.0002: input,hidraw1: USB HID v1.10 Mouse [Dell DRAC5] on usb-0000:00:1d.7-1.1/input1 [ 4.528204] usb 1-1.2: new high speed USB device using ehci_hcd and address 5 [ 4.556450] usbcore: registered new interface driver usbhid [ 4.567627] usbhid: v2.6:USB HID core driver [ 4.648942] usb 1-1.2: New USB device found, idVendor=413c, idProduct=0001 [ 4.662735] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.677398] usb 1-1.2: Product: DRAC5 VIRTUAL MEDIA [ 4.687880] usb 1-1.2: Manufacturer: DELL INC. [ 4.699922] usb 1-1.2: SerialNumber: 1028 123456 [ 4.709419] usb 1-1.2: configuration #1 chosen from 1 choice [ 4.725898] Initializing USB Mass Storage driver... [ 4.735803] scsi1 : SCSI emulation for USB Mass Storage devices [ 4.736931] hda: UDMA/33 mode selected [ 4.737289] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 4.737372] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 4.737386] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.737441] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 4.737472] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000dce0 [ 4.737515] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.737517] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.737519] usb usb2: Product: UHCI Host Controller [ 4.737520] usb usb2: Manufacturer: Linux 2.6.32myrinet uhci_hcd [ 4.737522] usb usb2: SerialNumber: 0000:00:1d.0 [ 4.737571] usb usb2: configuration #1 chosen from 1 choice [ 4.737605] hub 2-0:1.0: USB hub found [ 4.737612] hub 2-0:1.0: 2 ports detected [ 4.737682] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 4.737689] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.737719] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 4.737755] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000dcc0 [ 4.737790] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.737792] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.737793] usb usb3: Product: UHCI Host Controller [ 4.737795] usb usb3: Manufacturer: Linux 2.6.32myrinet uhci_hcd [ 4.737796] usb usb3: SerialNumber: 0000:00:1d.1 [ 4.737842] usb usb3: configuration #1 chosen from 1 choice [ 4.737872] hub 3-0:1.0: USB hub found [ 4.737879] hub 3-0:1.0: 2 ports detected [ 4.738175] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 4.738183] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.738226] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 4.738252] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000dca0 [ 4.738285] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.738287] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.738289] usb usb4: Product: UHCI Host Controller [ 4.738290] usb usb4: Manufacturer: Linux 2.6.32myrinet uhci_hcd [ 4.738292] usb usb4: SerialNumber: 0000:00:1d.2 [ 4.738331] usb usb4: configuration #1 chosen from 1 choice [ 4.738356] hub 4-0:1.0: USB hub found [ 4.738362] hub 4-0:1.0: 2 ports detected [ 4.744507] ide-cd driver 5.00 [ 4.746235] ide-cd: hda: ATAPI 24X CD-ROM drive, 256kB Cache [ 4.746239] Uniform CD-ROM driver Revision: 3.20 [ 5.202381] scsi2 : SCSI emulation for USB Mass Storage devices [ 5.214356] usbcore: registered new interface driver usb-storage [ 5.226404] USB Mass Storage support registered. [ 6.136451] floppy0: no floppy controllers found [ 9.260035] floppy0: no floppy controllers found done. Begin: Mounting root file system[ 9.312065] PM: Starting manual resume from disk ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... kinit: name_to_dev_[ 9.339534] kjournald starting. Commit interval 5 seconds t(/dev/sda1) = s[ 9.352179] EXT3-fs: mounted filesystem with writeback data mode. da1(8,1) kinit: trying to resume from /dev/sda1 kinit: No resume image, doing normal boot... done. Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.86 booting Starting the hotplug events dispatcher: udevd[ 10.134472] udev: starting version 150 [ 10.204762] scsi 1:0:0:0: CD-ROM Dell Virtual CDROM 123 PQ: 0 ANSI: 0 CCS [ 10.222503] scsi 2:0:0:0: Direct-Access Dell Virtual Floppy 123 PQ: 0 ANSI: 0 CCS . [ 10.241517] sd 2:0:0:0: [sdb] Attached SCSI removable disk Synthesizing the initial hotplug events...[ 10.292372] sr0: scsi-1 drive done. Waiting for /dev to be fully populated...[ 10.365020] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 10.439819] processor LNXCPU:00: registered as cooling_device0 [ 10.451820] processor LNXCPU:01: registered as cooling_device1 [ 10.463774] processor LNXCPU:02: registered as cooling_device2 [ 10.475748] processor LNXCPU:03: registered as cooling_device3 [ 10.497899] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 10.498335] input: PC Speaker as /class/input/input4 [ 10.584028] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.640171] EDAC MC: Ver: 2.1.0 Feb 12 2010 [ 10.649540] intel_rng: FWH not detected [ 10.658134] EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0 [ 10.673523] EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED) [ 10.722663] Error: Driver 'pcspkr' is already registered, aborting... [ 13.504036] floppy0: no floppy controllers found done. Activating swap...[ 13.703400] Adding 3911788k swap on /dev/sda1. Priority:-1 extents:1 across:3911788k done. Checking root file system...fsck from util-linux-ng 2.16.2 /dev/sda3: clean[ 13.786083] EXT3 FS on sda3, , 50372/367200 finternal journal iles, 429845/1465931 blocks done. Cleaning up ifupdown.... Loading kernel modules...done. Loading device-mapper support[ 13.981819] device-mapper: uevent: version 1.0.3 [ 13.991193] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com . Checking file systems...fsck from util-linux-ng 2.16.2 done. Setting kernel variables (/etc/sysctl.conf)...done. Setting kernel variables (/etc/sysctl.d/bindv6only.conf)...error: "net.ipv6.bindv6only" is an unknown key failed. Mounting local filesystems...[ 14.121461] kjournald starting. Commit interval 5 seconds [ 14.132475] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 14.148657] EXT3 FS on sda5, internal journal [ 14.157460] EXT3-fs: recovery complete. [ 14.165232] EXT3-fs: mounted filesystem with writeback data mode. done. Activating swapfile swap...done. Cleaning up temporary files.... Setting up networking.... Configuring network interfaces...Internet Systems Consortium DHCP Client V3.1.3 Copyright 2004-2009 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ [ 14.706116] myri10ge: eth0: link mismatch (Myrinet detected) Listening on LPF/eth0/00:60:dd:47:e4:f8 Sending on LPF/eth0/00:60:dd:47:e4:f8 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 No DHCPOFFERS received. Trying recorded lease 172.24.7.8 PING 172.24.120.10 (172.24.120.10) 56(84) bytes of data. --- 172.24.120.10 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms No working leases in persistent database - sleeping. Stopping NTP server: ntpd. Starting NTP server: ntpd. Stopping NTP server: ntpd. [ 62.485753] NET: Registered protocol family 10 [ 62.495178] lo: Disabled Privacy Extensions [ 62.504060] ADDRCONF(NETDEV_UP): eth0: link is not ready Starting NTP server: ntpd. done. Cleaning up temporary files.... Setting console screen modes and fonts. cannot (un)set powersave mode INIT: Entering runlevel: 2 Loading cpufreq kernel modules...done (none). Starting system log daemon.... Starting kernel log daemon.... Starting ACPI services.... Starting OpenBSD Secure Shell server: sshd. Starting CPU Frequency daemon: cpufreqd failed! CPUFreq Utilities: Setting ondemand CPUFreq governor...disabled, governor not available...done. Creating mx devices Installing init script cp: `/usr/local/sbin/mx_start_stop' and `/etc/init.d/mx' are the same file [ 65.545781] myri10ge 0000:0e:00.0: PCI INT A disabled Loading mx driver [ 68.620544] mx_mcp: module license 'Myricom' taints kernel. [ 68.631731] Disabling lock debugging due to kernel taint [ 68.757547] mx INFO: On x86_64, kernel version: 2.6.32myrinet #1 SMP Fri Feb 12 14:14:08 CET 2010 [ 68.775406] mx INFO: Memory available for registration: 1793456 pages (7005 MBytes) [ 68.790824] mx INFO: Version 1.2.11 [ 68.797899] mx INFO: Build root@gdx-208.orsay.grid5000.fr:/root/mx-1.2.11 Fri Feb 12 15:27:23 CET 2010 [ 68.816617] mx INFO: Debug OFF [ 68.823052] mx_driver 0000:0e:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 68.837757] mx INFO: Board 0: allocated MSI IRQ 97 [ 68.847444] mx INFO: CPU0: PAT = 0x7040600070406 [ 68.851436] mx INFO: CPU0: new PAT = 0x1040600070406 [ 68.866783] mx INFO: Board 0: Using PAT index 6 [ 68.908029] mx INFO: Board 0: device 8, rev 0, 1 ports and 2096896 bytes of SRAM available [ 68.924666] mx INFO: Board 0: Bridge is 8086:25f9 [ 68.934380] mx INFO: Board 0: MAC address = 00:60:dd:47:e4:f8 [ 68.954151] mx INFO: Loaded mcp of len 239632 [ 69.906051] mx INFO: Starting usermode mapper at /usr/local/sbin/mx_start_mapper [ 69.914175] mx INFO: mx0: Link0 is UP [ 74.973380] mx INFO: myri0: Will use skbuf frags (4096 bytes, order=0) [ 74.987157] mx INFO: 1 Myrinet board found and initialized Creating mx devices Starting Name Service Cache Daemon: nscd. Not starting internet superserver: no services enabled. Starting NTP server: ntpd. Starting periodic command scheduler: cron.