root@asterisk:~# modprobe wct4xxp vmsupport=0
root@asterisk:~# dmesg
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 177
Found TE4XXP at base address ea124000, remapped to f8860000
TE4XXP version c01a0164, burst ON, slip debug: OFF
TE4XXP running with work queues.
FALC version: 00000005, Board ID: 00
Reg 0: 0x34f39400
Reg 1: 0x34f39000
Reg 2: 0xffffffff
Reg 3: 0x00000000
Reg 4: 0x0000ff00
Reg 5: 0x00000000
Reg 6: 0xc01a0164
Reg 7: 0x00001000
Reg 8: 0x00000000
Reg 9: 0x00ff00ff
Reg 10: 0x00000000
TE4XXP: Launching card: 0
TE4XXP: Setting up global serial parameters
Found a Wildcard: Wildcard TE405P (2nd Gen)
About to enter spanconfig!
Done with spanconfig!
About to enter spanconfig!
Done with spanconfig!
About to enter spanconfig!
Done with spanconfig!
About to enter spanconfig!
Done with spanconfig!
Unassigning channel 0/1!
Unassigning channel 0/2!
Unassigning channel 0/3!
Unassigning channel 0/4!
Unassigning channel 0/5!
Unassigning channel 0/6!
Unassigning channel 0/7!
Unassigning channel 0/8!
Unassigning channel 0/9!
Unassigning channel 0/10!
Unassigning channel 0/11!
Unassigning channel 0/12!
Unassigning channel 0/13!
Unassigning channel 0/14!
Unassigning channel 0/15!
Unassigning channel 0/16!
Unassigning channel 0/17!
Unassigning channel 0/18!
Unassigning channel 0/19!
Unassigning channel 0/20!
Unassigning channel 0/21!
Unassigning channel 0/22!
Unassigning channel 0/23!
Unassigning channel 0/24!
Unassigning channel 1/1!
Unassigning channel 1/2!
Unassigning channel 1/3!
Unassigning channel 1/4!
Unassigning channel 1/5!
Unassigning channel 1/6!
Unassigning channel 1/7!
Unassigning channel 1/8!
Unassigning channel 1/9!
Unassigning channel 1/10!
Unassigning channel 1/11!
Unassigning channel 1/12!
Unassigning channel 1/13!
Unassigning channel 1/14!
Unassigning channel 1/15!
Unassigning channel 1/16!
Unassigning channel 1/17!
Unassigning channel 1/18!
Unassigning channel 1/19!
Unassigning channel 1/20!
Unassigning channel 1/21!
Unassigning channel 1/22!
Unassigning channel 1/23!
Unassigning channel 1/24!
Unassigning channel 2/1!
Unassigning channel 2/2!
Unassigning channel 2/3!
Unassigning channel 2/4!
Unassigning channel 2/5!
Unassigning channel 2/6!
Unassigning channel 2/7!
Unassigning channel 2/8!
Unassigning channel 2/9!
Unassigning channel 2/10!
Unassigning channel 2/11!
Unassigning channel 2/12!
Unassigning channel 2/13!
Unassigning channel 2/14!
Unassigning channel 2/15!
Unassigning channel 2/16!
Unassigning channel 2/17!
Unassigning channel 2/18!
Unassigning channel 2/19!
Unassigning channel 2/20!
Unassigning channel 2/21!
Unassigning channel 2/22!
Unassigning channel 2/23!
Unassigning channel 2/24!
Unassigning channel 3/1!
Unassigning channel 3/2!
Unassigning channel 3/3!
Unassigning channel 3/4!
Unassigning channel 3/5!
Unassigning channel 3/6!
Unassigning channel 3/7!
Unassigning channel 3/8!
Unassigning channel 3/9!
Unassigning channel 3/10!
Unassigning channel 3/11!
Unassigning channel 3/12!
Unassigning channel 3/13!
Unassigning channel 3/14!
Unassigning channel 3/15!
Unassigning channel 3/16!
Unassigning channel 3/17!
Unassigning channel 3/18!
Unassigning channel 3/19!
Unassigning channel 3/20!
Unassigning channel 3/21!
Unassigning channel 3/22!
Unassigning channel 3/23!
Unassigning channel 3/24!
Registered tone zone 0 (United States / North America)
About to enter startup!
TE4XXP: Span 1 configured for ESF/B8ZS
Putting 255 in register 2f on span 1
Putting 255 in register 30 on span 1
Putting 255 in register 31 on span 1
wct4xxp: Setting yellow alarm on span 1
SPAN 1: Primary Sync Source
2G: Got interrupt, status = 0000ff0b, GIS = 0081
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0b, GIS = 0081
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0b, GIS = 0081
VPM: Span 0 U-law mode
VPM: Span 1 U-law mode
VPM: Span 2 U-law mode
VPM: Span 3 U-law mode
VPM: Present and operational
Completed startup!
About to enter startup!
TE4XXP: Span 2 configured for ESF/B8ZS
Putting 0 in register 2f on span 2
Putting 0 in register 30 on span 2
Putting 0 in register 31 on span 2
wct4xxp: Setting yellow alarm on span 2
Completed startup!
About to enter startup!
TE4XXP: Span 3 configured for ESF/B8ZS
Putting 0 in register 2f on span 3
Putting 0 in register 30 on span 3
Putting 0 in register 31 on span 3
wct4xxp: Setting yellow alarm on span 3
Completed startup!
About to enter startup!
TE4XXP: Span 4 configured for ESF/B8ZS
Putting 0 in register 2f on span 4
Putting 0 in register 30 on span 4
Putting 0 in register 31 on span 4
wct4xxp: Setting yellow alarm on span 4
Completed startup!
root@asterisk:~#