Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 217
saa7134[0]: found at 0000:05:07.0, rev: 1, irq: 217, latency: 32, mmio: 0xd0000000
saa7134[0]: subsystem: 185b:c200, board: Compro VideoMate Gold+ Pal [card=49,autodetected]
saa7134[0]: board init: gpio is 4c8006
saa7134[0]: gpio: mode=0x0000000 in=0x04c0006 out=0x0000000 [pre-init]
saa7134[0]: i2c eeprom 00: 5b 18 00 c2 ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff 04 ff 00 05 34 33 cb
saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]/audio: ctl_mute=1 automute=0 input=S-Video  =>  mute=1 input=mute
saa7134[0]: gpio: mode=0x01ce780 in=0x0400006 out=0x00c8000 [mute]
saa7134[0]/audio: mute/input: nothing to do [mute=1,input=mute]
tuner 3-0060: All bytes are equal. It is not a TEA5767
tuner 3-0060: chip found @ 0xc0 (saa7134[0])
tuner 3-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
tuner 3-0061: chip found @ 0xc2 (saa7134[0])
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7134[0]: registered device radio0
saa7134[0]/audio: mute/input: nothing to do [mute=1,input=mute]
saa7134[0]/audio: tvaudio thread scan start [1]
saa7134[0]/audio: mute/input: nothing to do [mute=1,input=mute]
saa7134[0]/audio: skipping 4.500 MHz [   M]
saa7134[0]/audio: scanning 5.500 MHz [  BG] =>  dc is     0 [0/0]
saa7134[0]/audio: scanning 6.000 MHz [   I] =>  dc is     0 [0/0]
saa7134[0]/audio: scanning 6.500 MHz [ DKL] =>  dc is     0 [0/0]
saa7134[0]/audio: <4>saa7134[0]/audio: audio carrier scan failed, using 5.500 MHz [default]
saa7134[0]/audio: mute/input: nothing to do [mute=1,input=mute]
saa7134[0]/audio: tvaudio_setmode: trying PAL-B/G FM-stereo [5.500/5.742 MHz] acpf=122880+0
saa7134[0]/audio: getstereo: fm/stereo: idp=0x0
saa7134[0]/audio: tvaudio_setmode: trying PAL-B/G NICAM [5.500/5.850 MHz] acpf=122880+0
saa7134[0]/audio: getstereo: nicam=0x2
saa7134[0]/audio: tvaudio_setmode: using PAL-B/G FM-stereo [5.500/5.742 MHz] acpf=122880+0
saa7134[0]/audio: setstereo [fm] => mono
saa7134[0]/audio: setstereo [fm] => stereo
saa7134[0]/audio: mute/input: nothing to do [mute=1,input=mute]
saa7134[0]/audio: tvaudio thread scan start [2]
saa7134[0]/audio: mute/input: nothing to do [mute=1,input=mute]
saa7134[0]/audio: ctl_mute=0 automute=1 input=Radio  =>  mute=0 input=Radio
saa7134[0]: gpio: mode=0x01ce780 in=0x0400006 out=0x0080000 [Radio]
saa7134[0]/audio: mute/input: nothing to do [mute=0,input=Radio]
saa7134[0]/audio: tvaudio thread scan start [3]
saa7134[0]/audio: mute/input: nothing to do [mute=0,input=Radio]
saa7134[0]/audio: skipping 4.500 MHz [   M]
saa7134[0]/audio: scanning 5.500 MHz [  BG] =>  dc is     0 [0/0]
saa7134[0]/audio: scanning 6.000 MHz [   I] =>  dc is     0 [0/0]
saa7134[0]/audio: scanning 6.500 MHz [ DKL] =>  dc is     0 [0/0]
saa7134[0]/audio: <4>saa7134[0]/audio: audio carrier scan failed, using 5.500 MHz [default]
saa7134[0]/audio: mute/input: nothing to do [mute=0,input=Radio]
saa7134[0]/audio: tvaudio_setmode: trying PAL-B/G FM-stereo [5.500/5.742 MHz] acpf=122880+0
saa7134[0]/audio: getstereo: fm/stereo: idp=0x0
saa7134[0]/audio: tvaudio_setmode: trying PAL-B/G NICAM [5.500/5.850 MHz] acpf=122880+0