[channels]
;set up some basic defaults
;these keywords can enable some features...more features are available
;on PRI lines, but we don't get as much control on POTS
;these govern the features available on the FXS adaptor
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
;of course we want to run the software echo canceller
echocancel=yes
echocancelwhenbridged=yes
;we can tune the gain on incoming and outgoing audio
;adjust these if you have a device that seems 'quiet' or 'loud'
rxgain=0.0
txgain=0.0

;we're not really making use of groups here, but I'll leave it here.  We can
;use groups multiple channels we want to be able to use on a 'first-available'
;basis, i.e. if we have 4 provider POTS lines, we point the dialout extension
;to group 2 (device Zap/g2) and group all the POTS lines from the provider in
;one group.
group=1

;if immediate is set to yes, asterisk will automatically answer the line
;and jump to the 's' extension for the context.
immediate=no

;context will set the initial context for a given channel or channels
;asterisk will allow the channel to access extensions in the same context
;in extensions.conf. access to other contexts can be enabled globally via
;'include' statements (in extensions.conf) or selectively allowed access to
;certain extensions in other contexts with 'Goto' applications.

context=bell

;set the signalling type for each available channel. remember that we signal
;an fxs channel with fxo, and vice versa. This is the signalling that Asterisk
;will use to talk to the device, and should be OPPOSITE the signalling of
;the device.  So for the X100P FXO interface, signalling=fxs_ks.
;these definitions in zapata.conf should match the definitions in zaptel.conf
;I set up these files assuming that wcfxo (the PCI fxo driver) would be loaded
;before wcusb (the USB FXS driver) this is recommended, as disconnecting channel
;one will lose channel 2, and all drivers would have to be unloaded and reloaded
.
;obviously this only matters for the USB device, so we want it LAST.
signalling=fxs_ks
rxgain=6.0
channel=1

;of course I place my incoming callers in a different context from local users

;context=home

;and reverse the signalling
;signalling=fxo_ks
;rxgain=7.1
;txgain=1.0
;callerid="Server Desk" <13>
;mailbox=11@bell
;callgroup=1
;pickupgroup=1
;channel=2