(II) I810(0): VESA VBE OEM: Intel810(TM) Graphics Chip Accelerated VGA BIOS (II) I810(0): VESA VBE OEM Software Rev: 2.3 (II) I810(0): VESA VBE OEM Vendor: Intel Corporation (II) I810(0): VESA VBE OEM Product: i810 Graphics Controller (II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="X.Org Foundation" compiled for 6.8.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) I810(0): VESA VBE DDC supported (II) I810(0): VESA VBE DDC Level none (II) I810(0): VESA VBE DDC transfer in appr. 0 sec. (II) I810(0): VESA VBE DDC read failed (--) I810(0): Chipset: "i810-dc100" (--) I810(0): Linear framebuffer at 0x44000000 (--) I810(0): IO registers at addr 0x40800000 (II) I810(0): I810CheckAvailableMemory: 92088k available (==) I810(0): Will alloc AGP framebuffer: 8192 kByte (==) I810(0): Using gamma correction (1.0, 1.0, 1.0) (II) I810(0): ctx: Using hsync range of 30.00-50.00 kHz (II) I810(0): ctx: Using vrefresh range of 50.00-90.00 Hz (II) I810(0): Clock range: 9.50 to 136.00 MHz (II) I810(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "800x600" (hsync out of range) (II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1024x768" (unknown reason) (II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1024x768" (hsync out of range) (II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1024x768" (hsync out of range) (II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1024x768" (hsync out of range) (II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1152x864" (hsync out of range) (II) I810(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1280x960" (hsync out of range) (II) I810(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1280x1024" (hsync out of range) (II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1280x1024" (hsync out of range) (II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1400x1050" (hsync out of range) (II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1600x1024" (hsync out of range) (II) I810(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "2048x1536" (insufficient memory for mode) (II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "2048x1536" (insufficient memory for mode) (II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "2048x1536" (insufficient memory for mode) (II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1152x768" (width too large for virtual size) (--) I810(0): Virtual size is 1024x768 (pitch 1024) (**) I810(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) I810(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (**) I810(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II) I810(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (**) I810(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz (II) I810(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (**) I810(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz (II) I810(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (**) I810(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz (II) I810(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (**) I810(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) I810(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (**) I810(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz (II) I810(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (**) I810(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz (II) I810(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (**) I810(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz (II) I810(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (**) I810(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz (II) I810(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (**) I810(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz (II) I810(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (**) I810(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) I810(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (**) I810(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) I810(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (==) I810(0): DPI set to (75, 75) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="X.Org Foundation" compiled for 6.8.0, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.2 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="X.Org Foundation" compiled for 6.8.0, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.7 (II) I810(0): XvMC is Disabled: use XvMCSurfaces config option to enable. (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0x40800000 - 0x4087ffff (0x80000) MS[B] [1] 0 0 0x44000000 - 0x47ffffff (0x4000000) MS[B] [2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -1 0 0x40000000 - 0x400fffff (0x100000) MX[B] [8] -1 0 0x40100000 - 0x40100fff (0x1000) MX[B] [9] -1 0 0x40800000 - 0x4087ffff (0x80000) MX[B](B) [10] -1 0 0x44000000 - 0x47ffffff (0x4000000) MX[B](B) [11] -1 0 0x40400000 - 0x407fffff (0x400000) MX[B](B) [12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x00001000 - 0x0000103f (0x40) IX[B] [18] -1 0 0x00002000 - 0x0000201f (0x20) IX[B] [19] -1 0 0x00002020 - 0x0000202f (0x10) IX[B] [20] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [21] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (==) I810(0): Write-combining range (0x44000000,0x4000000) (II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) I810(0): Setting dot clock to 65.0 MHz [ 0x3f 0xa 0x30 ] [ 65 12 3 ] (II) I810(0): chose watermark 0x22214000: (tab.freq 65.0) (II) I810(0): xf86BindGARTMemory: bind key 2 at 0x00000000 (pgoffset 0) (II) I810(0): xf86BindGARTMemory: bind key 3 at 0x00800000 (pgoffset 2048) (II) I810(0): xf86BindGARTMemory: bind key 4 at 0x00c00000 (pgoffset 3072) (II) I810(0): Allocated of 4096 bytes for HW cursor (II) I810(0): xf86BindGARTMemory: bind key 5 at 0x00c01000 (pgoffset 3073) (II) I810(0): Allocated of 16384 bytes for ARGB HW cursor (II) I810(0): Adding 512 scanlines for pixmap caching (II) I810(0): Allocated Scratch Memory (II) I810(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Horizontal and Vertical Lines Offscreen Pixmaps Setting up tile and stipple cache: 16 128x128 slots 4 256x256 slots (==) I810(0): Backing store disabled (==) I810(0): Silken mouse enabled (**) I810(0): Direct rendering disabled (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (**) Option "Protocol" "ExplorerPS/2" (**) Mouse1: Device: "/dev/mouse" (**) Mouse1: Protocol: "ExplorerPS/2" (**) Option "CorePointer" (**) Mouse1: Core Pointer (**) Option "Device" "/dev/mouse" (==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50 (==) Mouse1: Buttons: 3 (**) Mouse1: SmartScroll: 1 (**) Option "CoreKeyboard" (**) Keyboard1: Core Keyboard (**) Option "Protocol" "standard" (**) Keyboard1: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Keyboard1: XkbRules: "xorg" (**) Option "XkbModel" "pc104" (**) Keyboard1: XkbModel: "pc104" (**) Option "XkbLayout" "us" (**) Keyboard1: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Keyboard1: CustomKeycodes disabled (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD) (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE) (II) Mouse1: ps2EnableDataReporting: succeeded (II) I810(0): xf86UnbindGARTMemory: unbind key 2 (II) I810(0): xf86UnbindGARTMemory: unbind key 3 (II) I810(0): xf86UnbindGARTMemory: unbind key 4 (II) I810(0): xf86UnbindGARTMemory: unbind key 5